General Engineer Jobs Found 94 Jobs, Page 4 of 4 Pages Sort by:
Building Services Engineer
Building Services Engineer - Client Direct - Banking Environment - London - £45,000 + bonus + AP Training About the Role: Exciting opportunity to work In House / Client Direct for a very well known financial institution in London. My client is looking for an Electrical or Mechanically biassed Maintenance Engineer to be based across 2 critical / commercial buildings next to each other in London. The successful candidates will be electrically or mechanically biased (C&G / NVQ) with a proven track record in commercial building maintenance, ideally within a critical site (i.e. Bank, Data centre, Blue chip office etc). Working with the maintenance team on site, he or she will be required to carry out mechanical, electrical and fabric maintenance to the following. In return the company is offering a competitive package of £45,000 + 10% bonus + AP Training and AP allowance once training complete. ? What’s in it for you?Up to £45,000 + 10% bonus£750 HV / £750 LV or £750 Mechanical AP payment~£3,000 call out allowance after site familiarisation (1 in 7 call out + 2x hourly rate if called out)Overtime available at 2x rate on weekdays and weekendsHV/LV or Mechanical AP Training10% Pension contribution from employer26 shifts holidayPrivate Health Insurance Dental PlanInterest Free Season Ticket LoanLife insurance 4x salaryA lot of progression availableWorking Hours:Day Shift (10 hour shifts)3 on, 1 off, 3 on, 3 off, 4 on, 7 off, 4 on, 3 off Later start on Saturdays & Sundays Key Responsibilities:Ensure that Planned Preventative Maintenance & Reactive maintenance is carried out to all client assets through operation of Planned Preventative Maintenance System.Ensure that plant faults and defects are swiftly remedied to maintain the plant in serviceable order at all times.Ensure that suitable spares are available to carry out maintenance of the above plant.Ensure that comprehensive maintenance records are completed in the form of job sheets.Ensure that Method Statements and Risk Assessments are prepared, reviewed and utilized for all tasks (PPM and reactive) carried out to ensure safe working practices.Lighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Monitor mechanical plantPumps, motorsBMS System - Monitor (i.e. Hot & Colds)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractors ✅ Requirements:Electrically or Mechanically qualified Level 3 / HNC / HNDYou must be able to provide copies of your trade certificates (Essential)Will need to pass security clearance A proven track record in commercial building maintenanceAn understanding of critical plant: Chillers, HVAC, UPS systems, Cooling Towers etcExcellent customer skills Ideally multi skilled Highly desirable (Not essential)High Voltage - Experience / Qualification - Current ? Ready to Apply? Send your CV to Fin@cbwstaffingsolutions.comOr call 0203 583 3099 and ask for Fin to learn more! ....Read more...
Apprenticeship Building Service Engineer
Key day-day tasks: Day-to-day tasks will be project based, the successful candidate may be required to work on one project or a multitude projects in any given week, subject to workload This work could vary and incorporate any of the below: HVAC Systems - Chilled Water Systems LTHW Systems - Domestic Water Systems / Boosted Systems - Above ground drainage - Specialist ventilation systems - Natural gas systems - BMS/BEMS and general controls - Clean room systems - Compressed air and specialist gasses/ - Builders work requirements Environmental design AutoCAD 2D Generating building / site plans Generating schematics Generating services layouts Assisting the Project Management team with enquiries associated with drawings and making changes to layouts where required Updating layouts / information based incoming client information, highlighting changes as well being responsible for managing incoming information and recording when new information is received Issue drawing packages to clients / supply chain and be responsible keeping document issue records up to date Assisting in improving drawing standards and digital engineering growth Assisting in design principles Assisting in the production of manual design calculations Assisting in the production of software design calculations Equipment Schedules: Assisting in the gathering of equipment selections and production of technical equipment schedules Assisting in the completion of equipment enquiries to the supply chain Site Activities: Assist the design team in with the organisation of site validations and surveys Attend site with the design team / project management team to assist with site surveys, technical assistance and general information gathering Personal Tasks: Be an enthusiastic learner and not afraid to ask the ‘silly question’ Accept that it is ok to make mistakes, make them and learn from them Contribute to design standards, being aware and keeping up to date with current legislation, design guides as well as approved codes of practice Training: You will be required to attend our Bordesley Green/Longbridge campus one day a week 9am-5pm. Training Outcome: Upon completion of the apprenticeship the candidate can expect to graduate to Design Engineer Whilst potentially after this route, perusing chartership Employer Description:GB4 Mechanical Services Ltd are a mechanical building services design and build contractor providing bespoke and turnkey solutions for varying industries and clients. We offer inhouse design as well as installation from feasibility to project handover. Working in a plethora of sectors no day is the same, from high end office fit-outs to manufacturing facilities and care homes. We are a small team, nurturing a culture of ‘people first’. We believe that a business is only as successful as the individuals who make it and with personnel growth and development comes business growth and development. We have a controlled appetite for growth, one that is sustainable but ensures a healthy work-life balance for all employees whilst maintaining the standards we pride ourselves on.Working Hours :Monday - Friday, 8.00am - 5.00pm. It is expected that the successful candidate will be in the office for a minimum of three days a week, subject to the needs of the business and training requirements of the individual.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Creative,Initiative ....Read more...
Mobile Engineer
Electrical Maintenance Operative – Retail / Warehouse Facilities – Wales / Midlands – £30,000–£45,000 CBW is delighted to present an exciting opportunity for an Electrical Maintenance Operative to join a leading private self-storage provider with a growing portfolio across the UK. This well-established company has built a strong presence across South Wales and the Midlands and is continuing to expand its operations. This role is ideal for a proactive, electrically qualified engineer who enjoys variety in their work. You’ll be responsible for planned and reactive maintenance across a range of properties including self-storage facilities, office buildings, and retail parades. If you are someone who thrives working independently while maintaining high safety and operational standards, this could be the perfect role. What You’ll Be Doing:Electrical Maintenance: Planned and reactive maintenance across multiple sitesFault Finding: Diagnose electrical faults and carry out effective repairs using the correct tools and techniquesGeneral Building Maintenance: Support works across building fabric including cladding and roofing elementsCompliance & Safety: Work in line with health and safety regulations, Permit to Work systems, and incident reporting proceduresSite Standards: Maintain safe, clean, and compliant working environmentsDocumentation: Accurately record completed works and associated costs using internal IT systemsYour Work Pattern:Monday to Friday08:00 – 16:3040 hours per weekWhat’s in It for You?£30,000 – £45,000 Salary (depending on experience)Company Vehicle or Fuel Allowance (40p per mile)20 Days Holiday + bank holidaysYour Birthday OffFree Storage Unit for You or Your FamilyRecognition Programmes£250 Employee Referral RewardFree On-Site ParkingWhat We’re Looking For:NVQ Level 3 in Electrical Installation (or equivalent)18th Edition Electrical RegulationsExperience with cladding and roofing worksIPAF LicenceGood understanding of health and safety procedures including risk assessmentsFull UK Driving LicenceAbility to work independently and manage workload to meet KPI/SLA targetsConfident using IT systems to log works and maintain recordsStrong communication skills and ability to work within a teamReady to Apply? Send your CV to Fin at CBW Staffing Solutions today to find out more and take the next step in your electrical maintenance career. ....Read more...
Shift Emergency Lighting Engineer
Shift Emergency Lighting Engineer - FM Service Provider - Commercial Estate - Crawley - Up to £49,160 per annumExciting opportunity to work for a leading FM service provider situated in Crawley. I am currently recruiting for a maintenance electrician to be based in a large commercial estate. The successful candidate will be a fully qualified electrician with C&G / NVQ level 2 & 3 + AM2 and a proven track record in electrical engineering. In return, the company are offering a competitive salary of £49,160, overtime and career progression.Hours of work Monday - Thursday / Tuesday - Friday on rotation Days and Nights 2 weeks of days 1 week of days 10 Hour Shifts 07:00am to 17:00pm / 21:00 to 07:00 Week 1 : Monday – Thursday 07:00am to 17:00pm Week 2: Monday – Thursday 07:00am to 17:00pm – Sunday 21:00pm to 07:00am Week 3: Monday – Wednesday 21:00pm to 07:00 am……. PackageBasic Salary up to £45,500 + £3,66020 Days Annual LeaveFree Parking on site Pension Internal and External Training CoursesGenuine career progression Lots of Overtime available. Key Duties:Lighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksUndertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractorsRequirementsElectrically Qualified - You must be able to provide copies of your trade certificatesCity & Guilds / NVQ Level 2&3 AM218th editionMust be able to pass security clearance A proven track record in commercial maintenanceExcellent customer service skillsHonest, hard-working and reliable If you are interested, please get in touch with Alex Denton of CBW Staffing Solutions to avoid missing out! ....Read more...
Ex forces Engineer
Ex-Forces Engineers Wanted – Building Services / Facilities Maintenance - £38,000 - £50,000Maintenance Engineer (Electrical or Mechanical)Commercial Buildings – City of LondonMultiple Roles Available Are you ex-Army or Navy with an electrical or mechanical background and looking to transition into building services or facilities maintenance? We are currently recruiting multiple Maintenance Engineers for a well-established FM / building services provider, working across high-profile commercial buildings in the City of London. These roles are well suited to ex-forces engineers who thrive in structured environments and are looking for a stable civilian career with clear procedures, strong training, and long-term progression. You will be joining professional on-site engineering teams, carrying out planned and reactive maintenance while continuing to develop your technical skillset within commercial building services. Roles Available We currently have multiple positions available on the following patterns: Monday to Friday (Days)08:00 – 17:00Continental Shift Pattern4 nights on / 4 off 3 days on / 3 nights on 6 off 4 days onShift Times:07:00 – 19:00 / 19:00 – 07:00What’s on OfferOvertime available23 days holiday + bank holidays (pro rata for shifts)Ongoing training and development within building servicesCompany pensionStable, long-term roles within a professional FM environmentKey ResponsibilitiesPlanned and reactive maintenance across electrical and mechanical systemsLighting (lamp changes, fault finding, small installations)Emergency lighting and fire alarm testingPlant room checks and maintenanceAHUs / FCUs (filter changes, cleaning)Pumps, motors, control panelsBasic BMS monitoring (hot & cold)General M&E and fabric maintenanceLogbook and compliance updatesBasic plumbing worksRequirementsEx-Army or Navy engineers strongly encouraged to applyElectrical or Mechanical qualificationElectrical: City & Guilds Level 3 (or military equivalent)Mechanical: City & Guilds Level 2 (or military equivalent)Ability to provide trade certificates or service recordsMaintenance experience (military or civilian)Strong work ethic and communication skillsComfortable in a client-facing commercial environmentIf you’re interested in transitioning into building services/facilities maintenance, please send your CV to: Alex Denton of CBW Staffing Solutions ....Read more...
Service Engineering Apprentice - Peterborough Workshop
We offer a 4-year Apprenticeship as an Engineering Technician where you will be supported to work alongside our Workshop Engineers to carry out planned and unplanned maintenance, inspections, diagnostics and rebuilds on Caterpillar equipment. During the first two years of the apprenticeship, you will develop skills in fundamentals, maintenance, and repair. The final two years will allow you to develop advanced diagnostic skills and repair techniques to include but not limited to: Undertake, overhaul, repair, or refurbishment work on Caterpillar equipment Carry out standard diagnostic tests on Caterpillar components Carry out planned maintenance and general repairs Complete commercial assessments and field inspections Check and record all parts and materials required for preparation work Essential Skills: Ability to communicate with customers in writing, over the phone and face-to-face Motivated to solve engineering problems Passionate about starting a career within the Engineering sector A flexible approach to work and learning Team player Embracing all regardless of their background or diversity (inclusive) Training: You will attend training blocks at Finning’s Training Academy in Cannock throughout your apprenticeship to gain the necessary knowledge, skills, and behaviours for your apprenticeship standard These blocks can be 1,2,4 or 6 weeks long. You will then apply those new knowledge and skills in your branch workplace. (All hotel/travel costs are covered by Finning UK & I) Apprenticeship duration can be reduced for applicants with recognised prior learning in the industry sector This will be determined during the initial assessment process You can find out more about our apprenticeship scheme and about what our current apprentices say by visiting this page: https://www.finning.com/en_GB/company/careers/ourpeople/apprenticeship.htmlTraining Outcome: At the end of our Apprenticeship you will be a Level 3 Caterpillar qualified engineer You can then expect to be offered further training and development with Finning You can find out more about our apprenticeship scheme and about what our current apprentices say by visiting this page: https://www.finning.com/en_GB/company/careers/our-people/apprenticeship.htmlEmployer Description:Finning is the UK and Ireland distributor for the world-renowned Caterpillar products with over 80 years of industry leading achievement. We believe that our people are the heart and soul of our company and fundamental to our success. Apart from the satisfaction of working with a brand leader we offer an attractive all round package including 25 days holiday, pension scheme, healthcare, share scheme and various flexible benefits. https://www.finning.com/en_GB/company/careers/our-people/apprenticeship.html (opens in new tab) Disability Confident A fair proportion of interviews for this apprenticeship will be offered to applicants with a disability or long-term health condition. This includes non-visible disabilities and conditions. You can choose to be considered for an interview under the Disability Confident scheme. You’ll need to meet the essential requirements to be considered for an interview.Working Hours :Monday - Friday, 8.00am - 5.00pmSkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working ....Read more...
Service Engineering Apprentice - Lisburn Workshop
We offer a 4-year Apprenticeship as an Engineering Technician where you will be supported to work alongside our Workshop Engineers to carry out planned and unplanned maintenance, inspections, diagnostics and rebuilds on Caterpillar equipment. During the first two years of the apprenticeship, you will develop skills in fundamentals, maintenance, and repair. The final two years will allow you to develop advanced diagnostic skills and repair techniques to include but not limited to: Undertake, overhaul, repair, or refurbishment work on Caterpillar equipment Carry out standard diagnostic tests on Caterpillar components Carry out planned maintenance and general repairs Complete commercial assessments and field inspections Check and record all parts and materials required for preparation work Essential Skills: Ability to communicate with customers in writing, over the phone and face-to-face Motivated to solve engineering problems Passionate about starting a career within the Engineering sector A flexible approach to work and learning Team player Embracing all regardless of their background or diversity (inclusive) Training:Construction Equipment Maintenance Technician Level 3. You will attend training blocks at Finning’s Training Academy in Cannock throughout your apprenticeship to gain the necessary knowledge, skills, and behaviours for your apprenticeship standard. These blocks can be 1,2,4 or 6 weeks long. You will then apply those new knowledge and skills in your branch workplace. (All hotel/travel costs are covered by Finning UK & I). Apprenticeship duration can be reduced for applicants with recognised prior learning in the industry sector. This will be determined during the initial assessment process. You can find out more about our apprenticeship scheme and about what our current apprentices say by visiting this page:https://www.finning.com/en_ GB/company/careers/ourpeople/apprenticeship.htmlTraining Outcome: At the end of our apprenticeship, you will be a Level 3 Caterpillar qualified engineer You can then expect to be offered further training and development with Finning You can find out more about our apprenticeship scheme and about what our current apprentices say by visiting this page: https://www.finning.com/en_GB/company/careers/our-people/apprenticeship.htmlEmployer Description:Finning is the UK and Ireland distributor for the world-renowned Caterpillar products with over 80 years of industry leading achievement. We believe that our people are the heart and soul of our company and fundamental to our success. Apart from the satisfaction of working with a brand leader we offer an attractive all round package including 25 days holiday, pension scheme, healthcare, share scheme and various flexible benefits. https://www.finning.com/en_GB/company/careers/our-people/apprenticeship.html (opens in new tab) Disability Confident A fair proportion of interviews for this apprenticeship will be offered to applicants with a disability or long-term health condition. This includes non-visible disabilities and conditions. You can choose to be considered for an interview under the Disability Confident scheme. You’ll need to meet the essential requirements to be considered for an interview.Working Hours :Monday - Friday, 8.00am - 5.00pmSkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working ....Read more...
Service Engineering Apprentice - Winsford Workshop
We offer a 4-year Apprenticeship as an Engineering Technician where you will be supported to work alongside our Workshop Engineers to carry out planned and unplanned maintenance, inspections, diagnostics and rebuilds on Caterpillar equipment. During the first two years of the apprenticeship, you will develop skills in fundamentals, maintenance, and repair. The final two years will allow you to develop advanced diagnostic skills and repair techniques toinclude but not limited to: Undertake, overhaul, repair, or refurbishment work on Caterpillar equipment. Carry out standard diagnostic tests on Caterpillar components. Carry out planned maintenance and general repairs. Complete commercial assessments and field inspections. Check and record all parts and materials required for preparation work. Essential Skills: Ability to communicate with customers in writing, over the phone and face-to-face. Motivated to solve engineering problems. Passionate about starting a career within the Engineering sector. A flexible approach to work and learning. Team player. Embracing all regardless of their background or diversity (inclusive). Training:You will attend training blocks at Finning’s Training Academy in Cannock throughout your apprenticeship to gain the necessary knowledge, skills, and behaviours for your apprenticeship standard. These blocks can be 1,2,4 or 6 weeks long. You will then apply those new knowledge and skills in your branch workplace. (All hotel/travel costs are covered by Finning UK & I). Apprenticeship duration can be reduced for applicants with recognised prior learning in the industry sector. This will be determined during the initial assessment process. You can find out more about our apprenticeship scheme and about what our current apprentices say by visiting this page:- https://www.finning.com/en_ GB/company/careers/ourpeople/apprenticeship.htmlTraining Outcome: At the end of our Apprenticeship you will be a Level 3 Caterpillar qualified engineer You can then expect to be offered further training and development with Finning You can find out more about our apprenticeship scheme and about what our current apprentices say by visiting this page: https://www.finning.com/en_GB/company/careers/our-people/apprenticeship.htmlEmployer Description:Finning is the UK and Ireland distributor for the world-renowned Caterpillar products with over 80 years of industry leading achievement. We believe that our people are the heart and soul of our company and fundamental to our success. Apart from the satisfaction of working with a brand leader we offer an attractive all round package including 25 days holiday, pension scheme, healthcare, share scheme and various flexible benefits. https://www.finning.com/en_GB/company/careers/our-people/apprenticeship.html (opens in new tab) Disability Confident A fair proportion of interviews for this apprenticeship will be offered to applicants with a disability or long-term health condition. This includes non-visible disabilities and conditions. You can choose to be considered for an interview under the Disability Confident scheme. You’ll need to meet the essential requirements to be considered for an interview.Working Hours :Monday - Friday, 8.00am - 5.00pm.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working ....Read more...
Service Engineering Apprentice - Boldon Field
We offer a 4-year Apprenticeship as an Engineering Technician where you will be supported to work alongside our Workshop Engineers to carry out planned and unplanned maintenance, inspections, diagnostics and rebuilds on Caterpillar equipment. During the first two years of the apprenticeship, you will develop skills in fundamentals, maintenance, and repair. The final two years will allow you to develop advanced diagnostic skills and repair techniques to include but not limited to: Undertake, overhaul, repair, or refurbishment work on Caterpillar equipment Carry out standard diagnostic tests on Caterpillar components Carry out planned maintenance and general repairs Complete commercial assessments and field inspections Check and record all parts and materials required for preparation work Essential Skills: Ability to communicate with customers in writing, over the phone and face-to-face Motivated to solve engineering problems Passionate about starting a career within the Engineering sector A flexible approach to work and learning Team player Embracing all regardless of their background or diversity (inclusive) Training:Construction Equipment Maintenance Technician Level 3. You will attend training blocks at Finning’s Training Academy in Cannock throughout your apprenticeship to gain the necessary knowledge, skills, and behaviours for your apprenticeship standard. These blocks can be 1,2,4 or 6 weeks long. You will then apply those new knowledge and skills in your branch workplace. (All hotel/travel costs are covered by Finning UK & I). Apprenticeship duration can be reduced for applicants with recognised prior learning in the industry sector. This will be determined during the initial assessment process. You can find out more about our apprenticeship scheme and about what our current apprentices say by visiting this page: https://www.finning.com/en_ GB/company/careers/ourpeople/apprenticeship.htmlTraining Outcome: At the end of our apprenticeship, you will be a Level 3 Caterpillar qualified engineer You can then expect to be offered further training and development with Finning You can find out more about our apprenticeship scheme and about what our current apprentices say by visiting this page: https://www.finning.com/en_GB/company/careers/our-people/apprenticeship.htmlEmployer Description:Finning is the UK and Ireland distributor for the world-renowned Caterpillar products with over 80 years of industry leading achievement. We believe that our people are the heart and soul of our company and fundamental to our success. Apart from the satisfaction of working with a brand leader we offer an attractive all round package including 25 days holiday, pension scheme, healthcare, share scheme and various flexible benefits. https://www.finning.com/en_GB/company/careers/our-people/apprenticeship.html (opens in new tab) Disability Confident A fair proportion of interviews for this apprenticeship will be offered to applicants with a disability or long-term health condition. This includes non-visible disabilities and conditions. You can choose to be considered for an interview under the Disability Confident scheme. You’ll need to meet the essential requirements to be considered for an interview.Working Hours :Monday - Friday, 8.00am - 5.00pm.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working ....Read more...
Senior Software Engineer- GCS
JOB DESCRIPTION Job title: Senior Software Engineer - GCS Location: Fareham, Hampshire Responsible to: Principal Engineer - GCS Liaison with: All Kraken staff, sub-contractors, customers, and suppliers About the role: To work on the development of user-facing Ground Control Station (GCS) software designed to enable operators to remotely control and monitor autonomous vehicles beyond visual line-of-sight. This role focuses on developing robust, intuitive interfaces using C++, Qt, QML, and JavaScript, while also incorporating modern UX principles and thorough testing methodologies. You will be responsible for designing, implementing, and optimising user interfaces that must enable operators to navigate complex tactical situations without overwhelming them. You will be expected to run UI experiments with our in-house team of operations experts and with key customers to determine critical software requirements. You should be comfortable handling complex workloads across R&D, prototyping, and mission-critical production deployments. Primary responsibilities include, but are not limited to: Work on the design and development of user-facing GCS software for autonomous vehicle monitoring and control. Build and maintain user interface software using C++, Qt, QML, and JavaScript. Engage with operators to gather requirements, validate usability, and refine user experience. Develop prototypes and storyboards to capture user requirements and iterate on design concepts. Ensure software robustness through rigorous testing, validation, and performance optimization. Collaborate with cross-functional teams, including autonomy and hardware engineers, to integrate software solutions. Document and maintain codebases with a focus on readability, scalability, and maintainability. Provide technical leadership and mentorship to junior developers. PERSON SPECIFICATION Essential qualifications, skills and experience: Extensive experience in C++ and Qt, ideally including QML and JavaScript. Strong understanding of user interface design principles, particularly for mission-critical systems. Experience defining software requirements, developing architectures, and producing robust implementations. Proficiency in software testing methodologies, including unit testing, integration testing, and user acceptance testing. UI testing techniques, including automated testing, usability testing, and end-to-end testing, is highly desirable. Strong communication skills and the ability to interact effectively with end-users to gather requirements. Proven ability to work independently and manage complex workloads effectively. Desirable qualifications, skills and experience: as above but not essential for the role Experience with storyboarding and UX design software (e.g., Figma, Sketch, Adobe XD). Prior experience working in remote control systems, robotics, or defence-related industries. Knowledge of the maritime environment, nautical charts, or survey software. Familiarity with HTML/CSS and WebSockets. Familiarity with cloud-based systems, containerization Key behaviours that align with our commitment to excellence, collaboration and efficiency within the workplace: To be punctual and manage workload effectively to meet deadlines and priorities Clearly convey ideas and information while actively listening to others Work well with colleagues to achieve common goals and support team members as needed Identify issues and develop practical solutions in a timely manner Maintain a high standard of conduct, respecting confidentiality and addressing challenges respectfully Ensure work is accurate, thorough and free from errors through careful review Take ownership of tasks, following through on commitments Maintain professionalism in client interactions General accountabilities and responsibilities: To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day-to-day activities and procedures within the specified role To maintain personal ability in, and appropriate use of, all relevant IT (Information and Technology) and other systems required to adequately perform the role To act ethically, with integrity and in the best interest of the business at all times To maintain a professional and supportive relationship with team members and other departments to deliver business objectives or deadlines To carry out any other duties as detailed by a member of the senior management team or authorised representative To keep good time management to minimise any wasted time and maximise productivity and effectiveness Health & Safety responsibilities: To ensure that the working area is a clean and a safe environment in compliance with the best practice and health and safety policies To ensure any equipment used is safe, within electrical test date and all guards and interlocks are working and in place To act safely and responsibly in line with company processes and Health and Safety procedures to ensure your safety and the safety of others To report any potential Health and safety hazards or violations to your line manager or directly to the QHSE Manager To ensure any PPE or work wear required or provided for the job is worn and checked regularly for wear and then reported when replacements required ....Read more...
Senior Software Engineer- GCS
JOB DESCRIPTION Job title: Senior Software Engineer - GCS Location: Fareham, Hampshire Responsible to: Principal Engineer - GCS Liaison with: All staff, sub-contractors, customers, and suppliers About the role: To work on the development of user-facing Ground Control Station (GCS) software designed to enable operators to remotely control and monitor autonomous vehicles beyond visual line-of-sight. This role focuses on developing robust, intuitive interfaces using C++, Qt, QML, and JavaScript, while also incorporating modern UX principles and thorough testing methodologies. You will be responsible for designing, implementing, and optimising user interfaces that must enable operators to navigate complex tactical situations without overwhelming them. You will be expected to run UI experiments with our in-house team of operations experts and with key customers to determine critical software requirements. You should be comfortable handling complex workloads across R&D, prototyping, and mission-critical production deployments. Primary responsibilities include, but are not limited to: Work on the design and development of user-facing GCS software for autonomous vehicle monitoring and control. Build and maintain user interface software using C++, Qt, QML, and JavaScript. Engage with operators to gather requirements, validate usability, and refine user experience. Develop prototypes and storyboards to capture user requirements and iterate on design concepts. Ensure software robustness through rigorous testing, validation, and performance optimization. Collaborate with cross-functional teams, including autonomy and hardware engineers, to integrate software solutions. Document and maintain codebases with a focus on readability, scalability, and maintainability. Provide technical leadership and mentorship to junior developers. PERSON SPECIFICATION Essential qualifications, skills and experience: Extensive experience in C++ and Qt, ideally including QML and JavaScript. Strong understanding of user interface design principles, particularly for mission-critical systems. Experience defining software requirements, developing architectures, and producing robust implementations. Proficiency in software testing methodologies, including unit testing, integration testing, and user acceptance testing. UI testing techniques, including automated testing, usability testing, and end-to-end testing, is highly desirable. Strong communication skills and the ability to interact effectively with end-users to gather requirements. Proven ability to work independently and manage complex workloads effectively. Desirable qualifications, skills and experience: as above but not essential for the role Experience with storyboarding and UX design software (e.g., Figma, Sketch, Adobe XD). Prior experience working in remote control systems, robotics, or defence-related industries. Knowledge of the maritime environment, nautical charts, or survey software. Familiarity with HTML/CSS and WebSockets. Familiarity with cloud-based systems, containerization Key behaviours that align with our commitment to excellence, collaboration and efficiency within the workplace: To be punctual and manage workload effectively to meet deadlines and priorities Clearly convey ideas and information while actively listening to others Work well with colleagues to achieve common goals and support team members as needed Identify issues and develop practical solutions in a timely manner Maintain a high standard of conduct, respecting confidentiality and addressing challenges respectfully Ensure work is accurate, thorough and free from errors through careful review Take ownership of tasks, following through on commitments Maintain professionalism in client interactions General accountabilities and responsibilities: To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day-to-day activities and procedures within the specified role To maintain personal ability in, and appropriate use of, all relevant IT (Information and Technology) and other systems required to adequately perform the role To act ethically, with integrity and in the best interest of the business at all times To maintain a professional and supportive relationship with team members and other departments to deliver business objectives or deadlines To carry out any other duties as detailed by a member of the senior management team or authorised representative To keep good time management to minimise any wasted time and maximise productivity and effectiveness Health & Safety responsibilities: To ensure that the working area is a clean and a safe environment in compliance with the best practice and health and safety policies To ensure any equipment used is safe, within electrical test date and all guards and interlocks are working and in place To act safely and responsibly in line with company processes and Health and Safety procedures to ensure your safety and the safety of others To report any potential Health and safety hazards or violations to your line manager or directly to the QHSE Manager To ensure any PPE or work wear required or provided for the job is worn and checked regularly for wear and then reported when replacements required ....Read more...
Sales Representative - NY
JOB DESCRIPTION Summary Carboline is looking to fill an open Territory Sales Representative within their Northeast Territory and are seeking candidates located near large cities inthe New York Metro Area. This position will be responsible for both selling and generating new business with already established customers while also developing new prospects to grow volume, revenue and increase the profitability of this territory. We are seeking individuals with a hunter's mentality and prior experience working in the paint and coatings industry. This position will report into the Northeast Region Director of Sales. Minimum Requirements Bachelor's in Business or a Technical degree or equivalent experience 4+ years sales and or business development experience in the fireproofing or protective coatings industry Preferred Requirements Previous industrial sales experience and NACE certifications are a plus. Physical Requirements This position requires minimal physical activity. May require lifting up to 50lbs on occasion. May require computer usage for an extended period of time - up to 8 hours in a day. Occasional exposure to various chemicals. May require travel by car up to 50%, including nighttime. Essential Functions Responsible for calling on new and existing customers to build sales volume, to remain abreast of customer requirements and to assess market trends. Calls on customers and prospective customers to inform them of products, new releases, services available, supply, etc. Provides technical assistance when necessary. Responsible for securing and renewing orders; works with customer services and sales management to provide servicing levels required by the customer. Builds and maintains a sales program within the territory based on strategic planning including prospecting, new business development, levels of available business and level of repeat business. Works effectively with all company personnel and resources to provide full customer service and assure continuing customer satisfaction. Applies good judgment and prompt follow through on customer complaints, returns, claims or other problems on products / services provided. Gathers and reports significant developments within accounts, prospects competitors and the general market for use by company management in research, analysis and planning purposes. Provides annual sales detailing target markets and accounts. May act as a Field Technical Service Engineer as requested. Committed to the Company's safety and quality programs. Who We Are: Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously.Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you. What We Offer: We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply. "In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Service Engineering Apprentice - Diperk - Peterborough Workshop
Start your engineering career with DiPerk Power Solutions, the UK & Ireland’s only authorised Perkins engine distributor. As part of the Finning Group, the world’s largest Caterpillar dealer, you’ll gain the stability, resources and safety culture of a major global organisation while training inside a specialist engineering business that operates with a strong sense of independence. At DiPerk, you’ll help support customers across construction, agriculture, industrial and power generation sectors by working on the full range of Perkins diesel engines, from routine servicing to diagnostics, overhauls and repair. We offer a 4-year Apprenticeship as an Engineering Technician where you will be supported to work alongside our Workshop Engineers tocarry out planned and unplanned maintenance, inspections, diagnostics and rebuilds on Caterpillar equipment. What you can expect:During the first two years of the apprenticeship, you will develop skills in fundamentals, maintenance, and repair. The final two years will allow you to develop advanced diagnostic skills and repair techniques toinclude but not limited to: Undertake, overhaul, repair, or refurbishment work on Caterpillar equipment Carry out standard diagnostic tests on Caterpillar components Carry out planned maintenance and general repairs Complete commercial assessments and field inspections Check and record all parts and materials required for preparation work Essential Skills: Ability to communicate with customers in writing, over the phone and face-to-face Motivated to solve engineering problems Passionate about starting a career within the Engineering sector A flexible approach to work and learning Team player Embracing all regardless of their background or diversity (inclusive) Education: England, Wales & NI applicants- GCSE’s or equivalent in English and maths grades A-C or the numbered equivalent (9am- 4pm) ROI applicants- Hold qualifications in both English and Maths at Irish Leaving Certificate graded Ordinary 1- 4 or graded higher 1-7 Scotland applicants- hold qualifications in both English and maths at National (N5) Grade 5 or above Finning is a Disability Confident Employer, and we welcome applications from people who regard themselves as disabled.Regardless of your background or diversity we recruit on merit and encourage applications from all people in society. We do however have an under-representation of women in Engineering and would welcomeapplications from people who identify as women. As well as the exciting opportunity to train with us you will receive: Use of laptop and mobile phone 25 days annual leave per year Healthcare cash plan (company paid) Life assurance of three times your basic salary Access to our free employee assistance programme – This is provided 7 days a week all year round which provides services and support for you and your family members in relationto any issues that may be affecting you in your professional or personal life Training:You will attend training blocks at Finning’s Training Academy in Cannock throughout your apprenticeship to gain the necessary knowledge, skills, and behaviours for your apprenticeship standard. These blocks can be 1,2,4 or 6 weeks long. You will then apply those new knowledge and skills in your branch workplace. (All hotel/travel costs are covered by Finning UK & I). Apprenticeship duration can be reduced for applicants with recognised prior learning in the industry sector. This will be determined during the initial assessment process. You can find out more about our apprenticeship scheme and about what our current apprentices say by visiting this page: https://www.finning.com/en_ GB/company/careers/ourpeople/apprenticeship.htmlTraining Outcome:At the end of our Apprenticeship you will be a Level 3 Caterpillar qualified engineer. You can then expect to be offered further training and development with Finning. You can find out more about our apprenticeship scheme and about what our current apprentices say by visiting this page: https://www.finning.com/en_GB/company/careers/our-people/apprenticeship.htmlEmployer Description:Finning is the UK and Ireland distributor for the world-renowned Caterpillar products with over 80 years of industry leading achievement. We believe that our people are the heart and soul of our company and fundamental to our success. Apart from the satisfaction of working with a brand leader we offer an attractive all round package including 25 days holiday, pension scheme, healthcare, share scheme and various flexible benefits. https://www.finning.com/en_GB/company/careers/our-people/apprenticeship.html (opens in new tab) Disability Confident A fair proportion of interviews for this apprenticeship will be offered to applicants with a disability or long-term health condition. This includes non-visible disabilities and conditions. You can choose to be considered for an interview under the Disability Confident scheme. You’ll need to meet the essential requirements to be considered for an interview.Working Hours :Monday- Friday 8am to 5pmSkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working ....Read more...
Senior Software Engineer
Job title: Principal Software Engineer - Autonomy Location: Fareham, Hampshire Responsible to: Autonomy & Control Director Liaison with: All Kraken staff, sub-contractors, customers, and suppliers Role overview: To lead the software development of a high-level autonomy capability to be deployed to all Kraken autonomous vehicles. This is a diverse R&D-led role covering vessel guidance, mission frameworks and behaviours, obstacle avoidance, and other high-level capabilities including modern AI techniques. Most development will require strong expertise with C++, Python, ROS/ROS2, DDS, and embedded Linux environments. You will be responsible for designing, implementing, and optimising autonomy algorithms and systems in both experimental and production settings. You should be comfortable handling complex workloads across R&D, prototyping, and mission-critical production deployments. Primary responsibilities include, but are not limited to: Lead the development and implementation of high-level autonomous behaviours for unmanned vehicles. Design and optimise algorithms for obstacle avoidance, path planning, and mission-level autonomy. Work extensively with ROS2, DDS, and Linux-based systems to develop robust autonomy software. Collaborate with cross-functional teams, including perception, navigation, and hardware engineers, to integrate autonomy solutions. Develop and maintain high-quality, well-documented code using C++ and Python. Conduct rigorous testing and validation of autonomy software in both simulated and real-world environments. Provide technical leadership, mentoring, and guidance to junior engineers and researchers. Balance R&D experimentation with production-level software deployment and optimisation. PERSON SPECIFICIATION Essential skills, knowledge and experience: Extensive experience in C++, with a focus on software architecture and algorithms. Strong understanding of autonomous system design, including motion planning, state estimation, and behaviour-based control. Experience working with Linux, including system-level debugging and performance tuning. Solid knowledge of real-time systems, distributed computing, and middleware communication frameworks. Experience developing and deploying software in an R&D and production environment. Excellent problem-solving skills with the ability to innovate and iterate on autonomy algorithms. Strong verbal and written communication skills, capable of conveying complex technical ideas clearly. Desirable skills, knowledge and experience: Proven expertise in ROS or ROS2 and/or DDS based systems, Python. Experience with sensor fusion techniques (LIDAR, RADAR, cameras, IMUs). Knowledge of deep learning-based perception for autonomous systems. Experience with simulation tools such as Gazebo, CARLA, or Unreal Engine. Familiarity with real-time and embedded systems. Familiarity with cloud-based robotics and containerization (Docker, Kubernetes). Familiarity with PX4 and MAVLink based flight control systems. Previous work in the defence, aerospace, or maritime autonomy sectors. Key behaviours that align with our commitment to excellence, collaboration and efficiency within the workplace: To be punctual and manage workload effectively to meet deadlines and priorities. Clearly convey ideas and information while actively listening to others. Work well with colleagues to achieve common goals and support team members as needed. Identify issues and develop practical solutions in a timely manner. Maintain a high standard of conduct, respecting confidentiality and addressing challenges respectfully. Ensure work is accurate, thorough and free from errors through careful review. Take ownership of tasks, following through on commitments. Maintain professionalism in client interactions. General accountabilities and responsibilities: To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day-to-day activities and procedures within the specified role To maintain personal ability in, and appropriate use of, all relevant IT (Information and Technology) and other systems required to adequately perform the role To act ethically, with integrity and in the best interest of the business at all times To maintain a professional and supportive relationship with team members and other departments to deliver business objectives or deadlines To carry out any other duties as detailed by a member of the senior management team or authorised representative To keep good time management to minimise any wasted time and maximise productivity and effectiveness Health & Safety responsibilities: To ensure that the working area is a clean and a safe environment in compliance with the best practice and health and safety policies To ensure any equipment used is safe, within electrical test date and all guards and interlocks are working and in place To act safely and responsibly in line with company processes and Health and Safety procedures to ensure your safety and the safety of others To report any potential Health and safety hazards or violations to your line manager or directly to the QHSE Manager To ensure any PPE or work wear required or provided for the job is worn and checked regularly for wear and then reported when replacements required ....Read more...
Principal Software Engineer
Job title: Principal Software Engineer - Autonomy Location: Fareham, Hampshire Responsible to: Autonomy & Control Director Liaison with: All Kraken staff, sub-contractors, customers, and suppliers Role overview: To lead the software development of a high-level autonomy capability to be deployed to all Kraken autonomous vehicles. This is a diverse R&D-led role covering vessel guidance, mission frameworks and behaviours, obstacle avoidance, and other high-level capabilities including modern AI techniques. Most development will require strong expertise with C++, Python, ROS/ROS2, DDS, and embedded Linux environments. You will be responsible for designing, implementing, and optimising autonomy algorithms and systems in both experimental and production settings. You should be comfortable handling complex workloads across R&D, prototyping, and mission-critical production deployments. Primary responsibilities include, but are not limited to: Lead the development and implementation of high-level autonomous behaviours for unmanned vehicles. Design and optimise algorithms for obstacle avoidance, path planning, and mission-level autonomy. Work extensively with ROS2, DDS, and Linux-based systems to develop robust autonomy software. Collaborate with cross-functional teams, including perception, navigation, and hardware engineers, to integrate autonomy solutions. Develop and maintain high-quality, well-documented code using C++ and Python. Conduct rigorous testing and validation of autonomy software in both simulated and real-world environments. Provide technical leadership, mentoring, and guidance to junior engineers and researchers. Balance R&D experimentation with production-level software deployment and optimisation. PERSON SPECIFICIATION Essential skills, knowledge and experience: Extensive experience in C++, with a focus on software architecture and algorithms. Strong understanding of autonomous system design, including motion planning, state estimation, and behaviour-based control. Experience working with Linux, including system-level debugging and performance tuning. Solid knowledge of real-time systems, distributed computing, and middleware communication frameworks. Experience developing and deploying software in an R&D and production environment. Excellent problem-solving skills with the ability to innovate and iterate on autonomy algorithms. Strong verbal and written communication skills, capable of conveying complex technical ideas clearly. Desirable skills, knowledge and experience: Proven expertise in ROS or ROS2 and/or DDS based systems, Python. Experience with sensor fusion techniques (LIDAR, RADAR, cameras, IMUs). Knowledge of deep learning-based perception for autonomous systems. Experience with simulation tools such as Gazebo, CARLA, or Unreal Engine. Familiarity with real-time and embedded systems. Familiarity with cloud-based robotics and containerization (Docker, Kubernetes). Familiarity with PX4 and MAVLink based flight control systems. Previous work in the defence, aerospace, or maritime autonomy sectors. Key behaviours that align with our commitment to excellence, collaboration and efficiency within the workplace: To be punctual and manage workload effectively to meet deadlines and priorities. Clearly convey ideas and information while actively listening to others. Work well with colleagues to achieve common goals and support team members as needed. Identify issues and develop practical solutions in a timely manner. Maintain a high standard of conduct, respecting confidentiality and addressing challenges respectfully. Ensure work is accurate, thorough and free from errors through careful review. Take ownership of tasks, following through on commitments. Maintain professionalism in client interactions. General accountabilities and responsibilities: To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day-to-day activities and procedures within the specified role To maintain personal ability in, and appropriate use of, all relevant IT (Information and Technology) and other systems required to adequately perform the role To act ethically, with integrity and in the best interest of the business at all times To maintain a professional and supportive relationship with team members and other departments to deliver business objectives or deadlines To carry out any other duties as detailed by a member of the senior management team or authorised representative To keep good time management to minimise any wasted time and maximise productivity and effectiveness Health & Safety responsibilities: To ensure that the working area is a clean and a safe environment in compliance with the best practice and health and safety policies To ensure any equipment used is safe, within electrical test date and all guards and interlocks are working and in place To act safely and responsibly in line with company processes and Health and Safety procedures to ensure your safety and the safety of others To report any potential Health and safety hazards or violations to your line manager or directly to the QHSE Manager To ensure any PPE or work wear required or provided for the job is worn and checked regularly for wear and then reported when replacements required ....Read more...
Senior Software Engineer
Job title: Principal Software Engineer - Autonomy Location: Fareham, Hampshire Responsible to: Autonomy & Control Director Liaison with: All staff, sub-contractors, customers, and suppliers Role overview: To lead the software development of a high-level autonomy capability to be deployed to autonomous vehicles. This is a diverse R&D-led role covering vessel guidance, mission frameworks and behaviours, obstacle avoidance, and other high-level capabilities including modern AI techniques. Most development will require strong expertise with C++, Python, ROS/ROS2, DDS, and embedded Linux environments. You will be responsible for designing, implementing, and optimising autonomy algorithms and systems in both experimental and production settings. You should be comfortable handling complex workloads across R&D, prototyping, and mission-critical production deployments. Primary responsibilities include, but are not limited to: Lead the development and implementation of high-level autonomous behaviours for unmanned vehicles. Design and optimise algorithms for obstacle avoidance, path planning, and mission-level autonomy. Work extensively with ROS2, DDS, and Linux-based systems to develop robust autonomy software. Collaborate with cross-functional teams, including perception, navigation, and hardware engineers, to integrate autonomy solutions. Develop and maintain high-quality, well-documented code using C++ and Python. Conduct rigorous testing and validation of autonomy software in both simulated and real-world environments. Provide technical leadership, mentoring, and guidance to junior engineers and researchers. Balance R&D experimentation with production-level software deployment and optimisation. PERSON SPECIFICIATION Essential skills, knowledge and experience: Extensive experience in C++, with a focus on software architecture and algorithms. Strong understanding of autonomous system design, including motion planning, state estimation, and behaviour-based control. Experience working with Linux, including system-level debugging and performance tuning. Solid knowledge of real-time systems, distributed computing, and middleware communication frameworks. Experience developing and deploying software in an R&D and production environment. Excellent problem-solving skills with the ability to innovate and iterate on autonomy algorithms. Strong verbal and written communication skills, capable of conveying complex technical ideas clearly. Desirable skills, knowledge and experience: Proven expertise in ROS or ROS2 and/or DDS based systems, Python. Experience with sensor fusion techniques (LIDAR, RADAR, cameras, IMUs). Knowledge of deep learning-based perception for autonomous systems. Experience with simulation tools such as Gazebo, CARLA, or Unreal Engine. Familiarity with real-time and embedded systems. Familiarity with cloud-based robotics and containerization (Docker, Kubernetes). Familiarity with PX4 and MAVLink based flight control systems. Previous work in the defence, aerospace, or maritime autonomy sectors. Key behaviours that align with our commitment to excellence, collaboration and efficiency within the workplace: To be punctual and manage workload effectively to meet deadlines and priorities. Clearly convey ideas and information while actively listening to others. Work well with colleagues to achieve common goals and support team members as needed. Identify issues and develop practical solutions in a timely manner. Maintain a high standard of conduct, respecting confidentiality and addressing challenges respectfully. Ensure work is accurate, thorough and free from errors through careful review. Take ownership of tasks, following through on commitments. Maintain professionalism in client interactions. General accountabilities and responsibilities: To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day-to-day activities and procedures within the specified role To maintain personal ability in, and appropriate use of, all relevant IT (Information and Technology) and other systems required to adequately perform the role To act ethically, with integrity and in the best interest of the business at all times To maintain a professional and supportive relationship with team members and other departments to deliver business objectives or deadlines To carry out any other duties as detailed by a member of the senior management team or authorised representative To keep good time management to minimise any wasted time and maximise productivity and effectiveness Health & Safety responsibilities: To ensure that the working area is a clean and a safe environment in compliance with the best practice and health and safety policies To ensure any equipment used is safe, within electrical test date and all guards and interlocks are working and in place To act safely and responsibly in line with company processes and Health and Safety procedures to ensure your safety and the safety of others To report any potential Health and safety hazards or violations to your line manager or directly to the QHSE Manager To ensure any PPE or work wear required or provided for the job is worn and checked regularly for wear and then reported when replacements required ....Read more...
Mobile Service Engineer
Mobile Service Engineer Based at: IOW Depot, Newport, PO30 5GY.Hours Worked: 24hrs per week (Monday, Tuesday & Wednesday)Salary: £12.50 per hour (subject to adjustment following any relevant statutory updates/review).Job purpose:To enable the Company to achieve the agreed contractual standard of service required by completing initial training in the workshop reconditioning wheelchair equipment to gain essential product knowledge. On completion of initial training this will enable you to work out in the field delivering, collecting, repairing, and servicing wheelchairs. The expectation is that once fully trained most jobs will be completed on a first-time fix basis.Key Responsibilities: Delivering and collecting wheelchairs to and from service user’s homes and NHS departments, always ensuring that the Company Infection Control Policy is followed.Servicing and repairing wheelchairs in the field with the aim of achieving a first time fix whenever possible.Ensure all paperwork relating to each job is read carefully and completed with all the necessary information regarding parts used and action taken written onto the job card to enable the administration team to accurately update the data base.Ensure any PPE supplied for use in carrying out your duties is used as instructed.Repair and service equipment to the agreed standard.P.D.I chairs for delivery to service users.Observe all regulations covering the driving and use of the Company vehicle on the public highway and be aware of employee responsibility under the Health & Safety at Work Act.Keep the vehicle you use in a tidy state and ensure stocks of all necessary parts are replenished each day.Ensure the vehicle safety check and the van check sheet are done each week.Maintain a professional customer service attitude and always use discretion when dealing with all service users and other agencies, always wear your uniform and identification badge, and ensure the uniform is always kept clean and laundered.Prioritise and organise your workload, referring to Line Manager as and when appropriate.Be responsible for the maintenance and safe keeping of all tools and equipment provided by the Company as outlined in the Company handbook.Agree to undertake all training offered that is necessary to maintain the skills required for this role. Qualifications: Full UK driving licence.Successful enhanced DBS checkGeneral workshop knowledgeBasic electrical knowledge including 12v/24v D.C. systems.Able to move and handle loads and equipment safely.An awareness and understanding of people with disabilities.Flexible approach to working conditions and working environment change.14. Ability to use own initiative within set boundaries of the role.Ability to use a mobile phone to relay photographs.Good written and verbal communication skills.Ability to relay clear instructions to clients. Physical demands of the job: Moving and handling of equipment and accessories following handling guidelines.Standing at a bench to work.Kneeling/crouching.Working in confined workspace if the job necessitates.Use of ramps and any other agreed moving equipment. Most challenging/difficult part of the role:Flexible working/responsive to changing priorities as set by Line Manager or Customer Service team.Confidentiality:Carrying out the work involved with this position, the employee will become party to confidential information including service user information. It is of paramount importance that all information is kept on a private and confidential basis and not disclosed to any other person.Health and Safety:The post holder is required to take reasonable care for his/her own health and safety and that of other persons who may be affected by his/her acts or omissions. The post holder is also required to co-operate with supervisory and managerial staff to ensure that all relevant statutory regulations, policies, codes of practise and departmental safety procedures are adhered to, and to attend relevant training programmes.Prevention and Control of infection:The prevention and control of infection is an integral part of the role of all Ross Care personnel. Staff members will contribute to the prevention and control of infection through standard infection control practises and compliance with the Company infection control policy.Service user/other agency/public engagement and involvement:Ross Care is committed to promoting and embedding equality, diversity and inclusiveness and expects that the post holder will actively promote and engage this commitment in all that they do. The post holder should ensure that in all their behaviours, attitudes and working they recognise and take account of the health needs and rights of all sections of the community including ethnicity, disability, gender, age, sexual orientation, and religion/belief. The post holder will be expected to engage the service users, other agencies, and the public where relevant and adhere to the Company’s policies and procedures governing zero tolerance to discrimination, harassment, bullying, stereotyping and prejudicial treatment.Equal Opportunities:Ross Care will be an equal opportunities employer. Its aim will be to ensure that neither applicants nor employees receive less favourable treatment on the grounds of sex, marital status, disability, religion, creed, colour, race, nationality, ethnic origins, or social background, or are disadvantaged by conditions or requirements that cannot be shown to be justifiable. INDHSEquals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful. ....Read more...
Field Service Engineer
Field Service Engineer Based at: IOW Depot, Newport, PO30 5GY.Hours Worked: 24hrs per week (Monday, Tuesday & Wednesday)Salary: £12.50 per hour (subject to adjustment following any relevant statutory updates/review).Job purpose:To enable the Company to achieve the agreed contractual standard of service required by completing initial training in the workshop reconditioning wheelchair equipment to gain essential product knowledge. On completion of initial training this will enable you to work out in the field delivering, collecting, repairing, and servicing wheelchairs. The expectation is that once fully trained most jobs will be completed on a first-time fix basis.Key Responsibilities: Delivering and collecting wheelchairs to and from service user’s homes and NHS departments, always ensuring that the Company Infection Control Policy is followed.Servicing and repairing wheelchairs in the field with the aim of achieving a first time fix whenever possible.Ensure all paperwork relating to each job is read carefully and completed with all the necessary information regarding parts used and action taken written onto the job card to enable the administration team to accurately update the data base.Ensure any PPE supplied for use in carrying out your duties is used as instructed.Repair and service equipment to the agreed standard.P.D.I chairs for delivery to service users.Observe all regulations covering the driving and use of the Company vehicle on the public highway and be aware of employee responsibility under the Health & Safety at Work Act.Keep the vehicle you use in a tidy state and ensure stocks of all necessary parts are replenished each day.Ensure the vehicle safety check and the van check sheet are done each week.Maintain a professional customer service attitude and always use discretion when dealing with all service users and other agencies, always wear your uniform and identification badge, and ensure the uniform is always kept clean and laundered.Prioritise and organise your workload, referring to Line Manager as and when appropriate.Be responsible for the maintenance and safe keeping of all tools and equipment provided by the Company as outlined in the Company handbook.Agree to undertake all training offered that is necessary to maintain the skills required for this role. Qualifications: Full UK driving licence.Successful enhanced DBS checkGeneral workshop knowledgeBasic electrical knowledge including 12v/24v D.C. systems.Able to move and handle loads and equipment safely.An awareness and understanding of people with disabilities.Flexible approach to working conditions and working environment change.14. Ability to use own initiative within set boundaries of the role.Ability to use a mobile phone to relay photographs.Good written and verbal communication skills.Ability to relay clear instructions to clients. Physical demands of the job: Moving and handling of equipment and accessories following handling guidelines.Standing at a bench to work.Kneeling/crouching.Working in confined workspace if the job necessitates.Use of ramps and any other agreed moving equipment. Most challenging/difficult part of the role:Flexible working/responsive to changing priorities as set by Line Manager or Customer Service team.Confidentiality:Carrying out the work involved with this position, the employee will become party to confidential information including service user information. It is of paramount importance that all information is kept on a private and confidential basis and not disclosed to any other person.Health and Safety:The post holder is required to take reasonable care for his/her own health and safety and that of other persons who may be affected by his/her acts or omissions. The post holder is also required to co-operate with supervisory and managerial staff to ensure that all relevant statutory regulations, policies, codes of practise and departmental safety procedures are adhered to, and to attend relevant training programmes.Prevention and Control of infection:The prevention and control of infection is an integral part of the role of all Ross Care personnel. Staff members will contribute to the prevention and control of infection through standard infection control practises and compliance with the Company infection control policy.Service user/other agency/public engagement and involvement:Ross Care is committed to promoting and embedding equality, diversity and inclusiveness and expects that the post holder will actively promote and engage this commitment in all that they do. The post holder should ensure that in all their behaviours, attitudes and working they recognise and take account of the health needs and rights of all sections of the community including ethnicity, disability, gender, age, sexual orientation, and religion/belief. The post holder will be expected to engage the service users, other agencies, and the public where relevant and adhere to the Company’s policies and procedures governing zero tolerance to discrimination, harassment, bullying, stereotyping and prejudicial treatment.Equal Opportunities:Ross Care will be an equal opportunities employer. Its aim will be to ensure that neither applicants nor employees receive less favourable treatment on the grounds of sex, marital status, disability, religion, creed, colour, race, nationality, ethnic origins, or social background, or are disadvantaged by conditions or requirements that cannot be shown to be justifiable. INDHSEquals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful. ....Read more...
Building Maintenance Technician
Full-Time; PermanentWage & Paygrade: $38.15/hr. (PG21) plus Benefit Allotment. Date Posted: January 09, 2026Who we are…The Pacific National Exhibition is an iconic institution in BC, famous for bringing generations of people together to celebrate and build memories. This 116-year-old, non-profit organization has an annual operating budget of over $70 million dollars and generates revenue through four activity streams: the 15-day annual summer Fair and winter Fair which average more than 700,000 people annually, Playland amusement park which welcomes 400,000 guests annually including Fright Nights, and a busy year-round portfolio of events including concerts, trade shows and film, cultural and community events. In total we bring over 2 million people through the site each year. The fourth activity stream is park care and facility maintenance. The PNE is proud of the work it does at Hastings Park and has a vibrant team that is passionate about events, guest experience and delivering memorable experiences.At the PNE, we strive to create an environment that reflects our organization’s core values: Enthusiasm, Excellence and Evolution. With a focus on these core values, we are committed to achieving our mission which is to “Deliver Memorable Experiences” for all who interact with the PNE whether it is our guests, our employees or the community.We are seeking a reliable and hard-working Building Maintenance Technician that has a passion for facilities and ground maintenance. The Building Maintenance Technician will report to the Maintenance Manager and will work under the direction of the Chief Engineer, providing operational support with specific Building & Grounds Maintenance tasks, PMs and project-based work as assigned where applicable on and throughout all the PNE Facilities on the PNE grounds.Why join our Team? Exhilarating and fun-loving cultureFlexible work environmentOpportunity for free or discounted tickets to shows, events, sports games, and much moreStaff discounts for Playland, The Fair, and Fright Nights, as well as all PNE Food StandsCompetitive compensation packageOpportunity to create lasting memories and friendships! What will you do this year?In your role as a Building Maintenance Technician, your primary accountabilities will be to: Support the Facilities & Maintenance Team led by the F&M Trades Manager, with specific WO inspections, minor repair tasks & project-based work as assigned on and throughout all the PNE Facilities on the PNE grounds.Support the F&M Trades Manager in the buildout of ALL site equipment and buildings in Limble.Carry out first call for WOs addressing minor repair and maintenance tasks and inspections to determine the nature of the repair so the decision to engage a red seal qualified technician can be made.Respond to and fix minor issues reported by occupants or identified during inspections.Support the teams in ensuring the building complies with all relevant safety codes and regulations and that all safety systems fire alarm sprinkler systems are fully operational.Oversee the pest control and other facility-based service contracts, inspecting for compliance.Assist with work set-up, completing projects and maintaining a safe clean work site.Operate vehicles and tools/equipment in compliance with all health and safety requirements as determined by WorkSafeBC, and all other applicable legislation and company policies.Operate mobile equipment (forklifts, scissor lifts, zoom booms) safely and responsibly.Completion of daily timesheets including compliance with Time-off request policy.Perform related duties as assigned when required or requested by the Maintenance Manager What else? Must have at least 3 years of Building & Facility Maintenance experience.Must have 5 years of hands-on tools, general repair experience.Understanding of service importance and a basic knowledge of building systems and infrastructure components and their purposes.Specialized training and or certifications an assetAbility to diagnose problems and identify solutions quickly and effectively.Ability to operate a variety of tools and power tools safely and effectively.Post-Secondary training in FM or Building Services is an asset.Must have a valid Class 5 BC Driver’s License and provide an up-to-date Driver’s Abstract confirming a clean driving record.Forklift experience and operator’s license favored.Must be capable of maneuvering heavy equipment on own or with assistance.Must be physically able to work in awkward positions.Must be a good communicator, capable of reading and writing for the purposes of written or oral instructions, timesheets and completing Limble Work Orders.Must be capable of working independently.Must be able to work from rough sketches or technical diagrams and interpret manufacturer instructions and specification.Must be able to perform detail-oriented work accurately and effectively.Must have effective interpersonal skills, including tact diplomacy and flexibility to work effectively with management, staff, contractors, and the public.Work Schedule: Tuesday to Friday 7:00AM – 5:00 PM.Successful candidates must undergo a Criminal Record Check. Who are you? OrganizedMethodicalProactiveSkillful communicatorCritical thinkerCommitted to striving for excellence Where and when to APPLY?Applications can be submitted via the PNE website at www.pne.ca/jobs and will be accepted until the role is filled.The PNE is proud to be an equal opportunity employer, committed to creating an inclusive workforce that reflects the diverse community we proudly serve. All applicants will receive consideration for employment without regard to race, colour, national or ethnic origin, religion, sex, sexual orientation, gender identity or expression, disability, or age. If you require any support or accommodations throughout any stage of the recruitment process, please contact the People & Culture Department at hr@pne.ca. ....Read more...