Lead Electrical Maintenance Engineer - Westminster, London - Up to £45-50,000Are you bored of working in an office?Would you like a role with NO CALL OUT!Are you electrically qualified?Exciting opportunity to work for an established FM Property company based in Westminster, London. I am currently recruiting for a Maintenance Electrician to be based at a large High end property situated by Westminster, London. The successful candidate will be a fully qualified Maintenance Electrician with a proven track record in commercial / property building maintenance. He or she will be required to carry out M&E/Fabric planned and reactive maintenance / Installation across this large static site.Working with the maintenance team on site. He or she will be required to have an understanding/hands on experience of the below. Our client is able to recruit for this position on a straight permanent basis and is also happy to consider electricians who have recently completed their apprenticeships (Must have C&G Level 3 as a minimum). In return the company are offering a competitive salary, further training (Testing & Inspection) overtime and the chance to work at this very unique and interesting site.Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setHIU Servicing Water Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsBMS System - Monitor (i.e. Hot & Colds)General building fabricHours of workMonday to Friday - 08:00am to 17:00pm (40 hour week)RequirementsElectrically qualified - You must be able to provide copies of your trade certificatesCity & Guilds/NVQ Level 2&3City & Guilds - 17th or 18th EditionA proven track record in commercial or property maintenanceInstallation experienceExcellent customer service skillsHappy to cover a large siteHonest, hard working and reliablePackageUp to £50,000 per annumOvertime available22 days holiday + BHCompany PensionNO CALL OUTPlease send your CV to Dan Barber at CBW Staffing Solutions for more Information!....Read more...
Foot Mobile Maintenance Cover Engineer - FM Service Provider - Foot Mobile / London Portfolio (Zones 1&2) - Up to £40,000 Exciting opportunity to work for a family run FM service provider situated in London. CBW are currently looking for a Maintenance Engineers to cover in the region of circa 10-15 commercial buildings located in London (Zones 1&2). The successful candidates will have a proven track record in commercial building maintenance. This is a Foot Mobile position and will require the successful candidates to attend a number of sites where he or she will be required to carry out PPM/Reactive maintenance to electrical and mechanical plant with particular emphasis on electrical maintenance. In return the company is offering a competitive salary paying up to £40,000 per annum based on experience/qualifications, overtime and further training. Key duties & ResponsibilitiesCarry out PPM's & Reactive maintenance on Pumps, Motors, Seals, Bearings and compressorsAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setBMS System - Monitor (i.e. Hot & Colds etc)Ensuring log books are kept up to dateEscorting specialist sub contractorsAssisting other engineersOffering technical supportThis is an M&E contract, so therefore there will be very little plumbing and fabric workCovering Holidays and Sickness - Site CoverHours of workMonday to Friday - Hours: 08:00am to 17:00pmRequirementsCity & Guilds / NVQ in Electrical or Mechanical Installation / Engineering (Not Essential)You must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceAn understanding of commercial building maintenanceMulti-skilledGood communication skillsExcellent customer service skillsYou must be happy to work on a "Foot Mobile" basis and attend multiple sites (i.e. This is not a mobile role where a vehicle is provided)PackageUp to £40,000 (Based on experience / Qualifications)Zones 1&2 Travel cardPDA's23 days holiday + BHOvertime availableTraining and development opportunitiesContributory pension schemePlease send your CV to Dan Barber at Cbw Staffing Solutions for more information....Read more...
We are seeking an experienced Maintenance Electrician to join a market leading international manufacturing organisation based in the Walbottle area of Newcastle. The business offers £52,200 basic salary, plus 5% performance bonus and overtime is also available at a premium. The shift pattern for this Maintenance Electrician role is 4 on 4 off, 6-6 days and nights. We are keen to speak with an experienced Maintenance Electrician seeking to join a forward-thinking company with large backing and wants to further their career with an array of accredited training, development and progression opportunities, plus fantastic prospects. What’s in it for you as a Maintenance Electrician:
Salary: £52.2K per annum, plus 5% Bonus
Pension contribution up to 10% and excellent benefits package
Training and career development, including health and safety training, management training (ILM), cross skilling and upskilling
Aviva Digicare+
Share option scheme, plus employee benefits program
Hours of work: Days and Nights, 6am to 6pm, 6pm to 6am, 4 on 4 off shift pattern
The ability to work within a skilled team of engineers upon a permanent basis
Job security and personal development within a market leading, international manufacturing organisation.
Main Duties & Responsibilities of the Maintenance Electrician:
Providing plant-wide electrical maintenance services, departmental support and repairs ensuring that all production targets are maintained - maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible
Make sure PPMs and commissioning stages are followed.
Required Experience and Qualifications of the Maintenance Electrician:
Recognised Electrical Engineering Apprenticeship & Qualification or level 3 qualification: NVQ and BTEC, with City and Guilds etc - Must be Electrical Engineering Qualifications to Level 3
Motor, Drive, safety circuit and PLC system experience would be a distinct advantage
The ability to work within a fast-paced manufacturing environment undertaking PPM and TPM activities
High degree of Health & Safety awareness
Ability to fault find, repair and provide solutions to electrical machinery problems.
In return, you will be offered a truly varied Maintenance Electrician role within a dynamic and a fast-paced business where opportunities to develop your skill sets and career progression path often arise. If you are interested, please apply now… Keywords: Electrical Maintenance Engineer / Maintenance Electrician
....Read more...
.NET Developer – Global Fitness Movement – Norwich
(Tech stack: .NET Developer, .NET 9, ASP.NET, C#, React, Angular 19, Microservices, Vue.js, TypeScript, Azure, Web API 2, Agile, Azure SQL, Programmer, Full Stack Engineer, Architect, .NET Developer)
Born in 2012 in California, our client began development on an app and website that made finding and booking classes effortless for fitness goers across the state. The company is now changing how people live their lives, bringing together a community of enthusiasts, helping people find the activities that make their true selves come alive or supporting small businesses and studios across the entire globe. They believe that being active is the key to living a happy and healthy life. Our client is now active in over 15 countries and continues rapid growth on a yearly basis.
It takes a team to make things happen and this team includes some of the most talented .NET Developer in the industry. They do not just have the best developers - but also the best karaoke stars, community activists and amateur chefs. Together, they are making the world an active place, which makes every day pretty damn gratifying.
They are looking for .NET Developer with excellent knowledge of object orientated development principles and technologies such as: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL. You will receive expert training on the latest technologies including: .NET 9, JavaScript, React, Angular 19, Microservices, MongoDB, Vue.js, TypeScript, Azure, AWS, Web API 2, Entity Framework, Node.js, Elasticsearch, Agile, TDD, BDD, Scrum, Kanban and MongoDB.
All positions come with the following benefits:
Annual bonus.
Free medical, dental and vision coverage.
Flexible work hours.
£5,000 training allowance.
Healthy (and unhealthy) snacks.
Charitable giving programs.
Casual dress - fitness wear encouraged!
Team classes, events and happy hours.
There is no ‘I’ in team. By working with talented individuals and developing upon innovative ideas, the team continues to succeed and grow. They are a global movement with big plans for the future. It is an incredible opportunity so if you are interested, act and apply today!
Location: Norwich, Norfolk, UK / Remote Working
Salary: £45,000 - £65,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
.NET Developer, SQL Server – Global Fitness Movement – Melksham, Wiltshire
(Tech stack: .NET Developer, .NET 9, ASP.NET, C#, SQL Server, React, Angular 19, Microservices, Vue.js, TypeScript, Azure, Web API 2, Agile, Azure SQL, Programmer, Full Stack Engineer, Architect, .NET Developer)
Born in 2012 in California, our client began development on an app and website that made finding and booking classes effortless for fitness goers across the state. The company is now changing how people live their lives, bringing together a community of enthusiasts, helping people find the activities that make their true selves come alive or supporting small businesses and studios across the entire globe. They believe that being active is the key to living a happy and healthy life. Our client is now active in over 15 countries and continues rapid growth on a yearly basis.
It takes a team to make things happen and this team includes some of the most talented .NET Developer in the industry. They do not just have the best developers - but also the best karaoke stars, community activists and amateur chefs. Together, they are making the world an active place, which makes every day pretty damn gratifying.
They are looking for .NET Developer with excellent knowledge of object orientated development principles and technologies such as: .NET, .NET Core / ASP.NET MVC, C# and SQL Server. You will receive expert training on the latest technologies including: .NET 9, JavaScript, React, Angular 19, Microservices, MongoDB, Vue.js, TypeScript, Azure, AWS, Web API 2, Entity Framework, Node.js, Elasticsearch, Agile, TDD, BDD, Scrum, Kanban, Azure SQL and MongoDB.
All positions come with the following benefits:
Annual bonus.
Free medical, dental and vision coverage.
Flexible work hours.
£5,000 training allowance.
Healthy (and unhealthy) snacks.
Charitable giving programs.
Casual dress - fitness wear encouraged!
Team classes, events and happy hours.
There is no ‘I’ in team. By working with talented individuals and developing upon innovative ideas, the team continues to succeed and grow. They are a global movement with big plans for the future. It is an incredible opportunity so if you are interested, act and apply today!
Location: Melksham, Wiltshire, UK / Remote Working
Salary: £40,000 - £55,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
.NET Developer, .NET 9, C#, Azure, JavaScript, Agile - Burton-in-Kendal, Cumbria
(Tech stack: .NET Developer, .NET 9, ASP.NET, C#, React, Angular 19, Microservices, Vue.js, TypeScript, Azure, Web API 2, Agile, Azure SQL, Programmer, Full Stack Engineer, Architect, .NET Developer, Urgent)Be the first of your friends to declare, “I love where I work!” and actually mean it. Laugh hard and work hard with some of the best and brightest in the tech industry. Our client has created the world’s first marketplace for live experiences by developing the technology that lets anyone create, share and find new things to do. Currently 180 countries host events using their platform, with over 1.5 million events taking place every year and 5 million tickets being processed every month!
They are looking for .NET Developer to help them dramatically expand and improve their set of products while simultaneously supporting a massive increase in the capacity of their systems. They have been extremely picky about assembling a team of smart, humble people who are passionate about creating amazing products. They work in an agile manner and believe strongly that small cross-functional teams empowered to make decisions and move fast is the best way to work. This is an unbeatable opportunity for .NET Developer who hope to work on and deliver world class software in a friendly, fun, and innovative environment.
The ideal .NET Developer candidates should have strong experience with: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL. Our client will provide you with industry recognised training into: .NET 9, JavaScript, React, Angular 19, Microservices, Vue.js, TypeScript, Azure, AWS, Web API 2, Entity Framework, Node.js, Elasticsearch, Agile, TDD, BDD, Scrum, Kanban and MongoDB.
Their benefits include the following:
Bonus (15%).
Generous stock option plan.
Medical, dental and vision insurance.
Company pension.
Choice of computer and gear.
All the coffee delivered to your desk you can order!
Snack filled kitchen.
Awesome work environment at a company with a huge vision.
Killer office with an onsite gym and games room!
Location: Burton-in-Kendal, Cumbria, UK / Remote Working
Salary: £40,000 - £50,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
.NET Developer – Global Fitness Movement – Hemel Hempstead
(Tech stack: .NET Developer, .NET 9, ASP.NET, C#, React, Angular 19, Microservices, Vue.js, TypeScript, Azure, Web API 2, Agile, Azure SQL, Programmer, Full Stack Engineer, Architect, .NET Developer)
Born in 2012 in California, our client began development on an app and website that made finding and booking classes effortless for fitness goers across the state. The company is now changing how people live their lives, bringing together a community of enthusiasts, helping people find the activities that make their true selves come alive or supporting small businesses and studios across the entire globe. They believe that being active is the key to living a happy and healthy life. Our client is now active in over 15 countries and continues rapid growth on a yearly basis.
It takes a team to make things happen and this team includes some of the most talented .NET Developer in the industry. They don’t just have the best developers - but also the best karaoke stars, community activists and amateur chefs. Together, they are making the world an active place, which makes every day pretty damn gratifying.
They are looking for .NET Developer with excellent knowledge of object orientated development principles and technologies such as: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL. You will receive expert training on the latest technologies including: .NET 9, JavaScript, React, Angular 19, Microservices, MongoDB, Vue.js, TypeScript, Azure, AWS, Web API 2, Entity Framework, Node.js, Elasticsearch, Agile, TDD, BDD, Scrum, Kanban and MongoDB.
All positions come with the following benefits:
Annual bonus.
Free medical, dental and vision coverage.
Flexible work hours.
£5,000 training allowance.
Healthy (and unhealthy) snacks.
Charitable giving programs.
Casual dress - fitness wear encouraged!
Team classes, events and happy hours.
There is no ‘I’ in team. By working with talented individuals and developing upon innovative ideas, the team continues to succeed and grow. They are a global movement with big plans for the future. It is an incredible opportunity so if you are interested, act and apply today!
Location: Hemel Hempstead, Hertfordshire, UK / Remote Working
Salary: £45,000 - £70,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
MECHANICAL FITTER – PACKAGE BUILDIrthlingborough, Northants, NN9 5QEFull Time - PermanentUtile Engineering is a family company and a leading UK manufacturer of Gas Compressors, Gas Boosters, Tank Mixing Systems and Double Membrane Gas Holders. We specialise in the turnkey packaging of our equipment for use in Water Companies, Industrial and Commercial premises, predominantly in the Renewable Energy sector. Utile is an equal opportunity employer that is committed to inclusion and diversity, also Utile is committed to providing a workplace free from discrimination or harassment.The ideal candidate for this role requires a background in Mechanical Engineering with knowledge of assembly and general engineering competence.This is a full-time position. Remuneration is negotiable and will be commensurate with experience.JOB ROLE:To prepare, assemble and pressure test complete skid mounted pump packages, stainless steel pipework systems & assemblies for our gas and air mixing systems, as well as other company products.KEY RESPONSIBILITIES:
To build skid packages to Company drawings, including gas compressors, gas boosters, gas & air mixing pipework, fabricated frames and bases.To kit up and prepare all components for assembly.Work from and interpret engineering drawings and use inspection/measuring equipment to company standardsRectify, modify or repair any fault occurring during assembly and test, as required.Carry out various test procedures as required by the customer or company specifications using various test methods and rigs.Undertake basic machining operations as required by the job or workload.Undertake all mechanical and manual lifting in a safe manner including slinging, weight estimation and manual handling.Allocate and store components to various areas within the factoryCarry out routine maintenance as required or on a daily basis.Ensure machines and work area are cleaned and tidied on a routine basis.Complete any documentation relevant to the department on a routine basis, as required.Comply with all Health and Safety Regulations within the companyThe above is not an exhaustive list of duties and you will be expected to perform different tasks as dictated by your changing role within the organisation and the overall business objectives of the organisation. Any other reasonable tasks by mutual agreement.
ACCREDITATIONS:The successful candidate should be a competent mechanical engineer with the experience and skill set required to carry out the above role. Formal qualifications are not essential but preferred.If this sounds like the opportunity for you, please apply ASAP.....Read more...
Voice Engineer
Leeds (Hybrid - 2 days on site)
A well-established technology services provider is looking to expand its Delivery Team with the addition of a Voice Services Technician. This position plays a key role in supporting the delivery of IP telephony and unified communications (UC) solutions, working closely with both internal departments and customers to ensure smooth, accurate and timely provisioning of services.
This is a customer-facing support role involving both administrative and technical tasks across small-scale voice deployments. Working under the guidance of senior delivery and engineering teams, the successful candidate will help manage and configure systems such as cloud telephony and Microsoft-hosted collaboration services.
While prior experience with platforms like Cisco Broadworks or Microsoft 365 is advantageous, full product training will be provided. This role is ideal for a graduate with a strong desire to develop knowledge within technology.
Role Responsibilities
• Supporting the activation of services once contracts are signed, ensuring accurate data is collected and implementation requirements are clearly understood
• Managing smaller orders and installations (typically under 10 users), maintaining delivery standards in line with agreed service levels
• Using internal CRM tools (e.g., Microsoft Dynamics) to manage workflow from contract signature through to provisioning and billing
• Drafting and issuing customer-facing documentation, including tailored voice configuration templates and bespoke call flow diagrams
• Carrying out user and hardware allocation, voice platform setup, and configuration of specific requirements
• Using external portals to provision third-party services that enhance the overall voice solution
• Liaising with provisioning colleagues to conduct number availability checks and prepare porting documentation
• Providing support across internal departments and acting as a point of reference for voice-related queries
• Representing the voice and UC function in a professional and collaborative manner
Key Requirements
• Confident communicator – both verbally and in writing – with the ability to present information clearly
• Highly organised, methodical and capable of managing multiple tasks and priorities
• Flexible, adaptable, and comfortable working in a fast-paced environment
• Strong attention to detail and a problem-solving mindset
• Team-oriented but able to take initiative and work independently
• Customer-first attitude with a proactive approach to service delivery
• No experience required however, a degree in a technology discipline is highly advantageous
Paying up to £25k – Hybrid working....Read more...
Lead Microsoft Dynamics CRM Developer - Towson, Baltimore County, Maryland
(Tech stack: Lead Microsoft Dynamics CRM Developer, Dynamics 365 CE, Customer Engagement, JavaScript, C#, .NET, Power Platform, Power BI, Power Automate, Power Apps, Programmer, Engineer, Architect, Lead Microsoft Dynamics CRM Developer)
Our client is a global sports brand that operates in over 115 countries worldwide. They are the biggest sports company in the USA and the second largest on the planet! Over the past 30 years they have been providing high performance athletes with the tools they need to remain at their peak.
They are looking to branch out and take a foothold in the sports science arena. In particular, they are looking to move into the field of high performance data analytics. They are aiming to help athletes utilize the latest sport science technology to analyze their performance and help them raise their game. They have recently signed ground breaking sponsorship deals with several high profile sports teams and national athletics squads.
As a result of this there are a number of Greenfield projects that require a talented a Lead Microsoft Dynamics CRM Developer. The successful candidate will serve as a subject matter expert (SME) responsible for the overall design, architecture and implementation of the Customer Relationship Management Tools (CRMs) in Microsoft Dynamics, as well as their integration with other systems.
We are looking for a Lead Microsoft Dynamics CRM Developer who strong knowledge of Microsoft Dynamics 365 CRM development and customization, JavaScript, C#, .NET, Web Services, Dynamics 365 APIs and SDKs, SQL Server, database management and data migration techniques. Any knowledge of Microsoft Power Platform (Power BI, Power Automate, Power Apps) is desirable.
This position comes with the following benefits:
15% bonus.
401(k).
Health insurance.
Dental insurance.
Vision insurance.
Disability insurance.
Life insurance.
Training allowance of $10,000 per year.
Free lunch.
Free gym membership.
Flexible working hours.
This is an opportunity for you to make a technical contribution to a possible gold medal or even champions league title!
Location: Towson, Baltimore County, Maryland, USA / Remote Working
Salary: $170,000 - $220,000 + Bonus + Benefits
Applicants must be based in the USA and have the right to work in the USA even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUSANETRECNOIRUSAREC....Read more...
Your day-to -day job role will include:
● Assembling and building products.
● Carrying out product maintenance and repairs.
● Picking and packing orders to be dispatched.
● Checking customer returns and re-boxing.
● Assisting with customer product demonstrations and set-up.
● Checking and counting stock levels.
● Other varied and adhoc warehouse tasks.
A typical week at Invictus Active would involve:
1) Using an order pick list, collecting products off shelves and packaging them with a courier label ready to be collected later in the day.
2) Assembling products from kit form and packaging them ready to be sold directly to the customer.
3) Assisting with a face-to-face customer assessment within the showroom in the form of attaching a product such as wheelchair power attachment and/or customising a product.
4) Being involved in new product development and prototypes, working with our engineer to improve and develop them ready to be mass-produced.
5) Booking in customer returns, checking them over and either fixing or re-boxing ready to be re-sold.
6) General moving and lifting of products and boxes onto racking with the use of ladders and scissor lift.
7) Being proactively involved in H&S to ensure a safe working environment for all.
8) Being involved in workplace layout to improve efficiency and effectiveness.
9) Problem-solving on a ‘never-ending improvement’ basis.Training:Apprenticeship Standard - Lean Manufacturing Operative Level 2.
Functional Skills if required.
Relevant Workplace Training. Training Outcome:We hope the apprentice will result in full-time continued employment with the potential to progress into other roles.Employer Description:Invictus Active is based in Wolverhampton within a brand new unit and showroom supplying a range of equipment for wheelchair users, to enable anyone to be as active and healthy as possible to enjoy life.
We have our own range of unique products that are assembled in-house and ship many others daily, with sales through our website and customer showroom visits.
Established since 2015 Invictus Active are a small growing team continuing looking to evolve and look for new opportunities with a fresh and exciting working environment.Working Hours :9.00am - 4.00pm, Monday - Friday.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Team working,Creative,Initiative....Read more...
As an Apprentice Heating Ventilation Air Conditioning Engineer (HVAC) with Johnson Controls, you'll embark on a dynamic journey that combines practical on-the-job experience with structured education.
Here's what you can expect in this role:
On-the-Job Work Experience:
You'll spend significant time at our client sites, where you'll be tasked with installing, maintaining, and repairing HVAC equipment. This hands-on experience will provide you with valuable insights into the diverse applications of HVAC systems across various environments, including sports stadiums, data centres, office buildings, and more
Collaboration with Qualified Engineers:
Throughout your apprenticeship, you'll work closely with qualified Johnson Controls Engineers who will serve as mentors, guiding you in developing your HVAC skills. This collaborative environment ensures that you receive the support and guidance needed to succeed in your role
Focus on Energy Efficiency:
You may have the responsibility of optimising the energy efficiency of the buildings you work in. This could involve analysing HVAC systems, identifying areas for improvement, and making recommendations to building owners to enhance energy efficiency and sustainability
Customer-Facing Element:
This role combines manual work with a customer-facing element, where you'll interact with clients to understand their specific needs and deliver top-notch service
Effective communication and professionalism are key as you represent Johnson Controls in customer interactions
The role will progress into the commissioning and project management side of the industry
Training:
Enrol in a Level 3 Refrigeration air conditioning and heat pump engineering qualification delivered by Liverpool College alongside fellow Johnson Controls apprentices
Engage in block release basis training and receive on-the-job guidance from experienced mentors and engineers
Training Outcome:
Upon completion of this apprenticeship there are many internal opportunities within the company
Many of our previous apprentices have become lead engineers and take control of their own team and projects
Employer Description:Johnson Controls is a global leader in technology and industry, serving customers in over 150 countries. Our mission is to create intelligent buildings, efficient energy solutions, and integrated infrastructure. We welcome individuals with a passion for engineering to join us in shaping a better tomorrow through our diverse range of projects and opportunities.Working Hours :Monday to Friday. Inclusive of a lunch break directed by your manager. Hours may vary depending on customer and team requirements'Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Team working,Initiative....Read more...
Typical day-to-day duties will include:
Optimise existing operations or develop alternative production methods using Lean tools and techniques
Support and drive automation and robotics implementation
Design manufacturing cells and factory layouts to enable efficient flow of materials of operator safety.
Establish plant and equipment investment requirements, quantifying the return and justifying expenditure
Value engineering of products and processes to reduce costs
Design manufacturing processes for new products as part of the new product introduction process
Create drawings and concepts using a variety of software, including CAD, Solidworks, ME10, and Microsoft Windows.
Support the efficient operation of production cells through problem-solving and root cause analysis to maintain customer service.
Training:This is a Level 3 Engineering and Manufacturing Support apprenticeship, delivered over a four year period.
The apprentice will attend the training centre, In-Comm Training Services in Aldridge, WS9 8UG, on a full time basis for the first 7 months.Training Outcome:It is expected that, upon successful completion of the apprenticeship, you will progress into the role of Manufacturing Engineer. Employer Description:ASSA ABLOY Limited is a wholly owned subsidiary of ASSA ABLOY, the world's leading manufacturer and supplier of door opening solutions, meeting tough end-user demands for safety, security and convenience.
Every day, we help billions of people move through a safer, more open world with ease. If you’ve ever walked through an automatic door, stayed in a hotel, or gone through passport control, you’ve probably used one of our products or services. From reliable home security to cutting-edge biometric technology for businesses, governments, airports, hospitals, schools and more, we touch every part of every day.
We have operations in over 70 countries and our people know local standards inside-out. They’re specialists in access essentials: like mechanical and digital locks, cylinders, keys, tags, security doors and automated entrances. At the same time, we are creating and embracing new technology – like biometrics, mobile security, and trusted identities. We stay at the forefront, so whatever you need, you’re in safe hands.Working Hours :8.00am to 4.45pm Monday to Thursday
8.00am to 12.30pm on Fridays.
Training centre hours are 9.00am to 4.30pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness,Hard working,Interest in Engineering....Read more...
As an Apprentice Fabricator/Welder, you'll be initially responsible for (but not limited to) the following:
Carry out fabrication and welding activities including use of a MIG/TIG set, various tooling and equipment
Accurately interpret technical drawings
Ensure correct marking up of component parts
Working to quality standards required for the components
Weld joints in accordance with approved welding procedures and quality requirements (TIG, MIG)
Use a variety of manual equipment to shape, form and cut metal
Undertake final inspections of finished components
Maintaining a clean, organised and productive work area for colleagues and yourself
When trained, ensure job timings are met/exceeded
You’ll develop your skills alongside trained engineers who are eager to pass on their knowledge, helping you learn a variety of duties and how to support the whole business. You’ll be mentored to achieve your full potential and create the foundation of a career in engineering.
If you are committed and ready to take your first step into a career with a fantastic employer, then please apply now! This apprenticeship and opportunity with CALO will be highly competitive, so don’t miss your chance!Training:
The successful candidates will continue their studies with apprenticeship specialists, RNN Group at their Rotherham College campus on a day release format, giving you the training and support you need to become an all-rounded and successful Engineer
The Apprenticeship Standard you will be studying is Engineering Operative – Fabrication/Welding – Level 2
Training Outcome:
Further industry appropriate training
A lifelong career in the engineering industry with CALO Fabrications Ltd
Employer Description:CALO Fabrications, established in 2024, is a bespoke steelwork and fabrication company committed to delivering high-quality products and outstanding customer service. With 20+ years of experience, our expertise is evident in both our craftsmanship and industry knowledge. We operate from state-of-the-art fabrication facilities located in South Yorkshire, ensuring that all our products adhere to industry standards. Our company is continually progressing and embracing the latest technologies to offer some of the finest fabrications available in the UK.Working Hours :Monday-Friday hours to be confirmedSkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Analytical skills,Logical,Team working,Creative,Initiative,Ability to prioritise workload,Work under pressure,Good attitude to work....Read more...
Submission of design information to statutory authorities (Councils etc.)
Arranging signing/sealing of agreement documentation (e.g. S104, S38, S278, SAB) with in-house personnel and external authorities
Assist with the cost assessments on the technical viability of new sites
Submission and liaison with NHBC/LABC to provide design information, monitor engineering conditions and confirm site visits
Communicate with consultants undertaking site investigations, topographical survey and other assessment reports on land acquired to ensure efficient progression of works
Assist in the production of layouts and technical report for Land Appraisals; and required working drawings and answer technical queries that may arise
Assist in the production of layouts and technical report for Land Appraisals; and required working drawings and answer technical queries that may arise
Issue engineering information to Commercial, Construction and Sales departments
Assist in the production of services drawings and engineering drawings (external works, as-built surveys etc.)
Work alongside the development engineers/assistant development engineers to liaise with Highway and Sewer Inspectors along with Statutory Authority officials to secure the adoption of all site infrastructure
Training:
One day a week at Warrington & Vale Royal College (Warrington site)
Training Outcome:
Progression to Assistant Development Engineer and beyond based upon monitored continued development, excellence and desire to do so
Employer Description:Castle Green is a forward-thinking homebuilder with a 35-year heritage. The name Castle Green encapsulates the core values behind our team and our homes. ‘Castle’ conveys the heritage that we have built up over the past three and a half decades; while ‘Green’ underpins our aspiration to deliver homes in line with the Government’s Green Revolution pledge. Castle Green Homes is committed to delivering high-quality homes and exceptional customer service, as evidenced by their HBF 5-Star rating. Our pioneering digital-first approach has set us apart within the industry, making it easier than ever to search for and purchase your dream home. We believe the homebuying journey should be happy, not stressful. That’s why we have developed innovative digital tools and technologies that allow our customers to customise their dream home, track construction progress, and complete the buying process digitally from the comfort of their own home.Working Hours :Monday- Thursday 8:30- 5pm
Friday- 8:30- 4pm
30 minute lunch breakSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness,Aspirational,Motivated....Read more...
During your apprenticeship, you will gain exposure, personal development, and experience within a wide range of technical areas at Resonate, growing your personal network and enabling us to collaboratively work out your career preferences and future direction.
We offer different specialisms, and you’ll have the opportunity to rotate across disciplines which may include:
Software Engineering
Project Management
Infrastructure/ DevOps
Quality Assurance / Software Testing
Training:You will study towards a BSc (Hons) Digital and Technology Solutions degree at MK:U - Cranfield University’s undergraduate brand.
Education at MK:U is different from other universities. Instead of traditional lectures and exams, MK:U’s entire curriculum uses problem-based learning (PBL) as their core educational approach. You will spend 20% of your time studying with MK:U on a day release basis (hybrid remote and in-person attendance) and the other 80% developing your career with us.Training Outcome:Whilst we will collaboratively work out your career preferences and future direction, your apprenticeship studies could take you into one of four different roles once qualified:
Software Engineer
Project Management
Infrastructure/ DevOps
Quality Assurance / Software Testing
At work, you will gain exposure, personal development, and experience within a wide range of technical areas associated with the software development life cycle at Resonate. Employer Description:We provide software products and services that are already improving the operational delivery of rail services. Our vision is to create a truly connected rail network, using our deep technology expertise and rail industry experience to deliver game-changing solutions that improve the quality of transport across the UK and beyond. We are a company that is excited by the possibilities offered by technology and are driven by improving experiences for passengers globally.
We have consistently innovated to create best in class software products, delivering high levels of automation into complex operational environments. We continue to evolve and offer our own integrated Traffic Management System; an operational and technical first. Our service offer continues to grow, taking advantage of technological advancements including cloud and data analytics.Working Hours :We have embraced hybrid working, with a normal work pattern of Monday to Friday. We have flexibility of when and where we work around the minimum 2 to 3 days a week in our Milton Keynes office.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working,Creative,Initiative,Enthusiasm for technology,Passionate about what you do,Curiosity....Read more...
As an Apprentice Fabricator/Welder, you'll be initially responsible for (but not limited to) the following:
Carry out fabrication and welding activities including use of a MIG set, various tooling and equipment;
Accurately interpret CAD/technical drawings and mark-out;
Ensure correct marking up of component parts;
Working to quality standards required for the components;
Welding joints in accordance with approved welding procedures and quality requirements (TIG, MIG);
Using a variety of equipment to shape, form and cut metal materials;
Undertaking final inspections of finished components;
Maintaining a clean, organised and productive work area;
Ensure job timings are met/exceeded.
You’ll develop your skills alongside dedicated Europa Engineering employees who are eager to pass on their knowledge and very familiar with the apprenticeship process. You will learn a variety of duties and support the whole business. You’ll be taught and mentored to achieve your full potential and create the foundation of a career in engineering.
If you are committed and ready to take your first step into a career with a successful and supportive employer, then please apply now! This apprenticeship and opportunity with Europa Engineering will be highly competitive, so do not miss your chance!Training:The successful candidates will continue their studies with apprenticeship specialists, RNN Group at their Rotherham campus on a day release format, giving you the training and support you need to become an all-rounded and successful Engineer.
The Apprenticeship Standard you will be studying is Engineering Operative – Fabrication/Welding – Level 2.Training Outcome:Progression to industry specialist qualifications – further and higher skill development. A lifelong career in the industry with Europa Engineering Ltd.Employer Description:Europa Engineering specialise in mechanical handling and fabrication, offering their customers everything from product concepts, engineering and design all the way through to installation and commissioning. With a vast knowledge of the automotive industry, their expertise has won them many contracts with well-known car manufacturers. As their customer base widens, Europa want to train new staff into becoming the next generation of skilled fabricators and welders. This available position will allow the right individual the chance to gain a lifelong career in a well-established and highly supportive business.Working Hours :Monday – Friday between 8.00am – 4.00pm.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Logical,Team working,Initiative,Work under pressure,Ability to prioritise workload....Read more...
.NET Developer - Gloucester
(Tech stack: .NET Developer, .NET 9, ASP.NET, C#, React, Angular 19, Microservices, Vue.js, TypeScript, Azure, Web API 2, Agile, Azure SQL, Programmer, Full Stack Engineer, Architect, .NET Developer)At this very moment our client is constructing the world’s first intelligent answer engine based on semantic information recognition. This new search engine is based on innovative cloud data technology which doesn’t recognise meaning by search words but rather by the correlation as regards to content and is able to generate answers from data.
Our client has had some of the brightest minds in .NET software development working on this product for the past 3 years and feels it is now time to take the market by storm. Their ultimate goal is to overtake Google by 2027. In line with this, they have begun a period of aggressive expansion and have opened a stylish new UK office. As part of this, they are looking to recruit the next generation of .NET Developer to take this search engine to new heights.
They are looking for .NET Developer who have experience in .NET, .NET Core / ASP.NET MVC, C# and Azure SQL. You will receive training in all aspects of: .NET 9, JavaScript, React, Angular 19, Microservices, MongoDB, Vue.js, TypeScript, Azure, AWS, Web API 2, Entity Framework, Node.js, Elasticsearch, Agile, TDD, BDD, Scrum, Kanban and MongoDB.
These .NET Developer positions come with the following benefits:
10% bonus (5% based on personal performance, 5% based on company performance).
Generous pension scheme and private healthcare.
Training allowance of £10,000 per year.
Free lunch.
Summer exchange programme with European offices (the company will pay for accommodation for you and your family for a period of up to six weeks).
27 days holiday (excluding Bank Holidays) plus your birthday off.
Flexible working hours.
Team BBQ every Friday afternoon during the months of July and August (early finish).
Free gym membership.
2 days per month allocated for team building activities
Access to a gaming lounge- complete with pool tables, ping pong tables and retro arcade games (yes this does include Pacman!!!).
If you are interested in working with a development team that contains 3 current MVPs then please send an up to date copy of your CV without delay.
Location: Gloucester, UK / Remote Working
Salary: £45,000 - £60,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
.NET Developer - Dartford
(Tech stack: .NET Developer, .NET 9, ASP.NET, C#, React, Angular 19, Microservices, Vue.js, TypeScript, Azure, Web API 2, Agile, SQL Server 2022, Programmer, Full Stack Engineer, Architect, .NET Developer)At this very moment our client is constructing the world’s first intelligent answer engine based on semantic information recognition. This new search engine is based on innovative cloud data technology which doesn’t recognise meaning by search words but rather by the correlation as regards to content and is able to generate answers from data.
Our client has had some of the brightest minds in .NET software development working on this product for the past 3 years and feels it is now time to take the market by storm. Their ultimate goal is to overtake Google by 2027. In line with this, they have begun a period of aggressive expansion and have opened a stylish new UK office. As part of this, they are looking to recruit the next generation of .NET Developer to take this search engine to new heights.
They are looking for .NET Developer who have experience in .NET, .NET Core / ASP.NET MVC, C# and SQL Server. You will receive training in all aspects of: .NET 9, JavaScript, React, Angular 19, Microservices, MongoDB, Vue.js, TypeScript, Azure, AWS, Web API 2, Entity Framework, Node.js, Elasticsearch, Agile, TDD, BDD, Scrum, Kanban and SQL Server 2022.
These .NET Developer positions come with the following benefits:
10% bonus (5% based on personal performance, 5% based on company performance).
Generous pension scheme and private healthcare.
Training allowance of £10,000 per year.
Free lunch.
Summer exchange programme with European offices (the company will pay for accommodation for you and your family for a period of up to six weeks).
27 days holiday (excluding Bank Holidays) plus your birthday off.
Flexible working hours.
Team BBQ every Friday afternoon during the months of July and August (early finish).
Free gym membership.
2 days per month allocated for team building activities
Access to a gaming lounge- complete with pool tables, ping pong tables and retro arcade games (yes this does include Pacman!!!).
If you are interested in working with a development team that contains 3 current MVPs then please send an up to date copy of your CV to Richard Gibson at Noir.
Location: Dartford, Kent, UK / Remote Working
Salary: £45,000 - £60,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
Head of Software Development – Software House – Glasgow/Hybrid
(Tech stack: Head of Software Development, Director of Engineering, Development Manager, Head of Development, Technical Lead, CTO, .NET 6, C#, Azure, Angular 11, Multithreading, RESTful, Web API 2, JavaScript, Developer, Programmer, Engineer, Architect, Director of Engineering)
Our client has created a global phenomenon, connecting people online to unique travel experiences, in more than 60,000 cities and 180 countries. As they approach their 10th anniversary, they are looking to produce a revolutionary set of products and services that will transform the travel industry beyond recognition.
We are seeking a talented Head of Software Development to grow and manage their award winning team of .NET Developers. For our client, engineering isn't just a job but a practice that they want to perfect. They aim to keep their systems modular, their code clean, and their documentation clear, and they follow the idea of leaving things better than how you found it. It's not just about the code — putting the right processes and tools in place to make developers happy and efficient is important to our client because it gives their .NET Developer the time to focus on polishing the product.
Head of Software Development applicants should come from a strong background of building large teams of .NET Developers. Although you will not be coding in this role you will be working very closely with architects and making high level technical decisions as such you should have a good grasp of technologies such as: .NET 6, .NET Core 3.1 / ASP.NET MVC, Azure, Angular 11, Solid, DRY, LINQ, multithreading, Microservices, RESTful, Web API 2, JavaScript, HTML5, Agile and SQL Server 2019.
This position comes with the following benefits:
Company shares
Performance-Based Bonus
Pension
Private medical healthcare (family plan included)
27 days holiday
Quarterly employee travel coupon
Community involvement (4 hours per month to give back to the community)
Much more...
No global movement springs from individuals. It takes an entire team united behind something big. Together, they work hard, they laugh a lot, they brainstorm nonstop, they use hundreds of Post-Its a week, and they give the best high-fives in town. If you are interested in being a part of this movement please apply today!
Location: Glasgow / Hybrid
Salary: £100 - £120k + Bonus + Pension + Benefits
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETREC
NOIRUKREC
NC/SB/HOSD....Read more...
KEY TASKS & RESPONSIBILITIES :
Assist with project-based tasks and general facility management activities as required
Provide support to BEUMER Group Customer Support (CS) colleagues based on-site
Communicate clearly and effectively regarding any engineering issues encountered, and accurately document these within your daily training records
Actively contribute to continuous improvement initiatives, bringing a proactive and solution-focused mindset
Ensure timely and accurate completion of your scheduled apprenticeship training log, linking day-to-day tasks with your learning objectives and providing appropriate supporting evidence
Maintain and update your off-the-job training log in accordance with apprenticeship requirements
As a BEUMER Group UK Ltd employee, you are responsible for maintaining a high standard of health and safety for yourself and others. You are expected to actively support and cooperate with all safety policies and practices to ensure a safe working environment for everyone
Shadow and support experienced engineers in delivering excellent customer service and technical support
Assist in ensuring equipment runs efficiently to avoid any operational disruptions for the customer
Learn and perform a range of electrical and mechanical tasks, including troubleshooting and fault diagnosis in both planned and reactive maintenance settings
Support the completion of Planned Preventive Maintenance (PPM) schedules and associated documentation to a high standard, including stock control processes, under the guidance of the duty engineer
Assist with maintenance and repair activities within a busy, automated airport baggage handling system
Take an active role in maintaining Health & Safety and Quality Assurance standards in all aspects of work
Training:Apprentices will be required to attend college at least x2 day per week either at Uxbridge, Harrow or Hayes Campus completing necessary mandatory training and units associated with the apprenticeship.
The apprentice will be required to complete:
• Work towards gaining a full Qualification.
Employment Rights and Responsibilities
Skills, Knowledge, and Behaviours
Standard and End Point Assessment
Other training will be provided by the employer as required to enable the fulfilment of the job role.Training Outcome:A permanent role maybe be offered upon successful completion of apprenticeship.Employer Description:BEUMER Group is an independent, family-owned enterprise. Originally a supplier to the local cement and mining industries, the company has developed into a market leader in the fields of conveying, loading, palletising, packaging, as well as sortation and distribution systems.Working Hours :4 shifts on, 4 shifts off (Days and Nights).Skills: Communication skills,Attention to detail,Logical,Problem solving skills,IT skills....Read more...
Observing, learning and understanding a wide range of engineering skills and processes while under the instruction of competent engineering staff
To be able to demonstrate these skills and processes as the training period progresses by working independently or with a team
To undertake tasks as instructed and increase overall contribution to the department
To undertake and successfully complete suitable college courses throughout the training period, achieving the academic grades and practical skills in order to entitle yearly progression leading to the award of a suitable level 4 (HNC)
Learning and understanding the importance of Health and safety within the facility
To learn how to maintain workshop equipment and to keep it in good repair
To maintain a logbook over the duration of the apprenticeship period, recording projects that have been undertaken and the skills learned
To maintain and to ensure general good housekeeping of the workshop and factory areas post work completion
To maintain a smart appearance and to act in a professional manner at all times whether on or off-site
Training:You will be studying towards the Level 3 Food & Drink Engineering Maintenance Standard as well as supporting training and qualifications to enable you to carry out the role of Multi-Skilled Engineer for Butternut Box (academic content delivered offsite on block release based in Huddersfield at Kirklees College).Training Outcome:This role could lead to full-time employment.Employer Description:At Butternut, the mission is to deliver health and happiness to dogs and their humans all over the world. In order to do just that, we need a team of forward-thinking, driven people who love dogs as much as we do. And we need quite a big kitchen too. Which is precisely why we have built one.
Located in Blyth, near Worksop, Rudie's Kitchen and Ace's Pantry are where all the magic happens, so to speak. It's where the tasty Butternut meals and treats will be gently cooked, using human-quality ingredients because, the way we see it, we wouldn't serve food to dogs that we wouldn't be happy to eat ourselves. At Butternut, we believe dogs deserve better, and if that's something you think too, we want to hear from you.
Butternut has come a long way since Kev & Dave (co-founders) hand-delivered the first Butternut Box, and we are now looking for brilliant people to join the team for this next part of the story.Working Hours :You will be working typically, 08:00 - 16:30 when working onsite and attending college 09:00 - 17:00 during block release. Working days TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Team working,Loves dogs (naturally),Keen interest in engineering....Read more...
Evaluate process rejects on a daily basis and provide scrap report if required
Retrieving and setting gauges for shop floor processes in a timely manner
Ensuring that gauging is released for external calibration on a weekly basis and ensuring that the general calibration status is in control
Ensuring that the shop floor has correct inspection records available
Providing PDI support to ensure parts are passed off in a timely manner for required sales
Performing daily process audits against the provided checklist to identify non-compliance and communicate remedial action items accordingly
Assist containment actions to check parts for dimensional failures and perform visual inspections
Using a variety of measurement devices to evaluate in-process machined castings to determine conformance (verniers, bore gauges, micrometres etc.)
Providing support within more junior roles as and when required.
Assist with running CMM programs to perform daily checks of the parts
The above does not expressly define the full extent of the role – we reserve the right to expect any other reasonable task to be undertaken.Training:
You will be required to attend Advance 1 Campus, Dudley College, 2 days in year 1, 1 day thereafter, term time only
You will be assigned an assessor who visits you in the workplace every 8 weeks to support you on your apprenticeship
Upon successful completion of your apprenticeship, you will gain a Level 3 Engineering and Manufacturing Support Technician qualification
Training Outcome:A career as a Quality Inspector, Quality Technician or Quality Engineer.Employer Description:The Brockmoor Foundry is a long established foundry whose core competency is the manufacture of ductile (spherodial graphite) iron. We manufacture a broad range of metal grades from 400/15 through to 800/2 across a diverse product range. As part of our ongoing commitment to providing a vertically integrated supply solution, we offer a wide range of additional, high precision services including machining, painting and assembly ensuring our role in the supply chain is all encompassing and lean and meets the expectations of an increasingly demanding market place. Our enviable customer portfolio (including several global market leaders in Commercial Vehicles, Hydraulics and Off Highway) demands that we embrace a long term commitment to collaboration and product optimisation whether through Cad support, Solidification analysis or our several years of experience. This same commitment is applied throughout our customer base with large and small accounts alike.Working Hours :Monday to Thursday
08:00 - 16:30
Friday
08:00 - 15:00.Skills: Communication skills,Attention to detail,Motivated,Meet targets,Willing to learn,Drive for improvement,Meet deadlines....Read more...
Typical day to day duties will include:
Control and arrange the implementation of modifications to existing products
Arrange and monitor the testing of prototype models and modified products
Assist in the development and introduction of new products for the custodial and high security sectors
Provide solutions for product improvement and advise on technical issues relating to the company's products
Generate pre and post-design documentation (circuit diagrams, product designs, etc, where appropriate
Test and repair, where appropriate, returned mechanical, electromechanical, and electronic products. Completion of associated documentation and reports
Liaise with and advise subcontractors and suppliers to assist them with the manufacture of components, sub-assemblies, and assemblies to the required standards
Provide cost estimates for potential projects/customer enquiries
Training:This is a Level 3 Mechatronics apprenticeship, delivered over four years.
The apprentice will attend the training centre, In-Comm Training Services in Aldridge, WS9 8UG, on a full-time basis for the first 10 months. Training Outcome:It is expected that, upon successful completion of the apprenticeship, you will progress into the role of Development Engineer within the HHS Group business unit. This may involve occasional overseas travel and/or site work, primarily at custodial and government premises such as prisons, police stations, secure hospitals, and immigration centres, etc. Employer Description:ASSA ABLOY Limited is a wholly owned subsidiary of ASSA ABLOY, the world's leading manufacturer and supplier of door opening solutions, meeting tough end-user demands for safety, security and convenience.
Every day, we help billions of people move through a safer, more open world with ease. If you’ve ever walked through an automatic door, stayed in a hotel, or gone through passport control, you’ve probably used one of our products or services. From reliable home security to cutting-edge biometric technology for businesses, governments, airports, hospitals, schools and more, we touch every part of every day.
We have operations in over 70 countries and our people know local standards inside-out. They’re specialists in access essentials: like mechanical and digital locks, cylinders, keys, tags, security doors and automated entrances. At the same time, we are creating and embracing new technology – like biometrics, mobile security, and trusted identities. We stay at the forefront, so whatever you need, you’re in safe hands.Working Hours :Monday to Thursday:
Start time - between 7am and 8am.
Finish - between 3:45pm and 4:45.
Friday Finish - between 11:30am and 12:30pm.
Training centre hours are 9.00am to 4.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness,Interest in Mech. Engineering,Hard working....Read more...
The Apprentice Engineer will be responsible for ensuring the smooth running and stability of various systems across the business spanning front and back office. This will include monitoring critical systems, anticipating and resolving issues as they arise and thinking of ways of reducing common problems.
Responsibilities:
Be the first point of contact for the TechSupport function, managing customer queries by assigning an appropriate priority and setting the expectation with the user.
Visit users at their desks, provide remote support and active participation when located on our Tech Bars.
A good understanding incident and problem management.
Responsible for resolving and troubleshooting queries, escalating to specialists where appropriate, and managing the technical relationships with our users.
Support our users on a wide range of technologies to meet the agreed Service Level Agreements.
Training:
Information Communication Level 3 (ICT) Apprenticeship Standard
You will also receive full training and support from the Just IT Apprenticeship team to increase your skills
Your training will include gaining a Level 3 ICT qualifications
Training Outcome:
Career progression opportunities
Possibility to secure a full-time position after successful completion of apprenticeship
Employer Description:Man Group is a global alternative investment management firm focused on pursuing outperformance for sophisticated clients via our Systematic, Discretionary and Solutions offerings. Powered by talent and advanced technology, our single and multi-manager investment strategies are underpinned by deep research and span public and private markets, across all major asset classes, with a significant focus on alternatives. Man Group takes a partnership approach to working with clients, establishing deep connections and creating tailored solutions to meet their investment goals and those of the millions of retirees and savers they represent.
Headquartered in London, we manage $172.6 billion* and operate across multiple offices globally. Man Group plc is listed on the London Stock Exchange under the ticker EMG.LN and is a constituent of the FTSE 250 Index. Further information can be found at www.man.com.Working Hours :Monday - Friday, 9:00am - 5:00pm.
Shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Creative,Initiative,Passion for ICT,Hardware and software,Hard-working....Read more...
