The apprenticeship is split into 2 modules, factory work and site work:
Factory module - You will learn fabrication and use of a variety of tools and disciplines to produce a variety of door systems
Site module - You will learn from a senior engineer the site aspects of the role, installation, repair and servicing
Training:
Engineering Fitter Level 3 Apprenticeship Standard
1 day will be spent at our Luckyn Lane Campus in Basildon
Training Outcome:Possible full-time employment dependant on availability and successful completion of the apprenticeship. Employer Description:Established in 1979 Guardian Industrial Doors are a family run business based in Leigh on sea in Essex. From this base we serve the whole country and are involved in the
supply manufacture, installation, repair and maintenance of industrial and commercial doors systemsWorking Hours :Monday to Friday.
Start time varies depending on work booked, but will be 8.00am to 4.30pm in the factory.Skills: Communication skills,IT skills,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working,Initiative,Patience,Physical fitness....Read more...
RF Design Engineer required, ideally Senior level to work on defence, military and avionics communications for long range real time video new product design and development. You will join a successful RF and Hardware Design team and work across the full product lifecycle from requirements through design, test, release and support of RF systems.
Requirements
British citizen eligible for security clearance
Radio Frequency System Architecture
RF Simulation
Altium Electronics Schematic capture, PCB Layout and Footprint or symbol Creation
Real time long range data link knowledge
High resolution video transfer understanding.
RF inhibitor exposure.
Bachelors or Masters degree in Engineering or related subject.
Role
RF Design for New Product Introduction or NPI and the evolution of existing world class RF systems for defence and aviation.
RF System Architecture exploiting the latest RF components and technologies.
RF Simulation using tools such as LabVIEW.
Schematic capture and PCB Design Layout in Altium.
Linear high power wide band RF amplifiers up to 200 Watts using for example GaN or LDMOS.
RF filter design.
Radio Transmitter and Receiver Design.
LNA, Down converter and Upconverter design.
Antenna design.
Use of oscilloscopes, analysers and signal generators.
Cadence AWR Microwave Office.
Ansys HFSS.
Switch mode PSUs, embedded circuitry, glue logic, analogue electronics and EMC circuitry.....Read more...
AV Installation Engineer - This is a new role in today for a friendly bespoke AV systems integration company. They are very busy at the moment and are looking to add to the team a new experienced member that has at least 2-4years high end residential audio visual experience. Ideally you will live in LONDON and happy to work in a professional environment that delivers a first client service to a discerning end user client base. You will ideally be able to install both CRESTRON and Lutron Lighting Systems. Your hands on skills need to be really good and if you also have experience with IT Home Networking that would be of interest. If you are interested in working for a company where you will be in a team and not just a number then please send me your fully technical CV that clearly shows your audio visual skills.AV A/V A-V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL BESPOKE SMARTHOME AUTOMATION HOME CINEMA CONTROL4 RAKO SONOS LUTRON CRESTRON CI CUSTOM INSTALL INSTALLATION RACK NETWORKING WYRESTORM DRAYTEK CEDIA lONDON....Read more...
AV Installation Engineer – This is a new role in today for a friendly bespoke AV systems integration company. They are very busy at the moment and are looking to add to the team a new experienced member that has at least 1-2years high end residential audio visual experience. Ideally you will live in SURREY and happy to work in a professional environment that delivers a first client service to a discerning end user client base. You will ideally be able to install both CRESTRON and Lutron Lighting Systems. Your hands on skills need to be really good and if you also have experience with IT Home Networking that would be of interest. The role comes with a vehicle the the ability to drive is needed. If you are interested in working for a company where you will be in a team and not just a number then please send me your fully technical CV that clearly shows your audio visual skills.AV A/V A-V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL BESPOKE SMARTHOME AUTOMATION HOME CINEMA CONTROL4 RAKO SONOS LUTRON CRESTRON CI CUSTOM INSTALL INSTALLATION RACK NETWORKING WYRESTORM DRAYTEK CEDIA SURREY
....Read more...
Job Description:
Our client based in Newcastle, is seeking an experienced and proactive GTS Engineer to join their dynamic technology function. This is an excellent opportunity for a technically skilled professional to play a key role in delivering enterprise-wide IT projects and initiatives within a complex and fast-paced environment.
Skills/Experience:
Proven experience in a 3rd Line IT Engineer or similar role, ideally in an enterprise or financial services environment.
Strong technical background in Microsoft technologies, including Windows operating systems and Office 365.
Working knowledge of ITIL processes, particularly incident, change and problem management.
Previous experience with cloud infrastructure management and migration.
Strong grasp of networking, infrastructure and hardware troubleshooting.
Experience with AV/conference room technology setup and support.
Demonstrated ability to manage multiple projects simultaneously, delivering high-quality outcomes on time and within scope.
Excellent communication skills, with an ability to engage effectively with both technical and non-technical stakeholders.
Strong analytical, organisational and problem-solving skills.
Desirable:
Experience with Azure, Hyper-V, or similar enterprise technologies.
Knowledge of automation or scripting tools (e.g., PowerShell).
Core Responsibilities:
Lead the delivery and implementation of Microsoft upgrades, including Windows and Office environments, all while ensuring minimal disruption to users.
Contribute to change management, incident management and business continuity planning and execution, maintaining robust operational resilience.
Provide third-line support across the IT Service Desk, resolving complex technical issues and supporting junior team members.
Troubleshoot and resolve enterprise-level IT issues across systems, applications and infrastructure.
Collaborate with cross-functional teams to design and implement IT solutions that align with business objectives.
Support system migration projects from planning through post-migration phases.
Develop and maintain comprehensive documentation for systems, processes and procedures to promote knowledge sharing across teams.
Oversee the setup and maintenance of AV and meeting room technology, ensuring smooth operation.
Contribute to continuous improvement through knowledge transfer, mentoring and sharing of best practices across the IT function.
Core-Asset Consulting is an equal opportunities recruiter and we welcome applications from everyone irrespective of age, disability, gender, gender identity or expression, race, colour, ethnic or national origin, sexual orientation, religion or belief, marital/civil partner status or pregnancy.
Job reference: 16292
To apply for this vacancy applicants must be eligible to work in the UK in accordance with the Immigration, Asylum and Nationality Act 2006.
At Core-Asset, we’re committed to protecting and respecting your privacy. Our privacy statement explains when and why we collect personal information about people who engage with our services, how we use it, the conditions under which we may disclose it to others, and how we keep it secure. We may change this policy from time to time, so please check this policy occasionally to ensure that you’re happy with any changes.
By engaging with us (either by applying for a job we’re advertising, registering through our website, or getting in touch with our business) you’re agreeing to be bound by this policy.
Core-Asset Consulting is committed to protecting the privacy of our candidates, clients and website users. For further information, please refer to our full Privacy Statement available on our website http://www.core-asset.co.uk/about-core-asset/privacy-statement
Core-Asset Consulting offers specialist recruitment services to asset management, accounting & finance, asset servicing, legal and the wider financial services sector in Scotland.
INDPERM....Read more...
Maintenance Engineer
Leeds (LS27) £45,000 + Bonus | Pension | Life Cover Panama Shift PatternWe’re recruiting an experienced Maintenance Engineer to support a busy manufacturing site in Leeds. You’ll keep plant and equipment running safely and efficiently, working with modern injection moulding, robotics, automated assembly, hydraulics, and pneumatics.What you’ll do:
Diagnose and repair electrical & mechanical faults
Deliver preventive and reactive maintenance (TPM)
Troubleshoot equipment and drive long-term improvements
Support new machinery, automation, and upgrades
Maintain accurate records using Q-Pulse / Microsoft
Ensure full Health, Safety & Quality compliance
What we’re looking for:
NVQ Level 3 / City & Guilds in Electrical Engineering
Strong maintenance background in manufacturing
Experience with hydraulics & pneumatics
Injection moulding, robotics, or rotational assembly advantageous
Able to work independently and problem-solve effectively
What’s in it for you:
£45,000 salary + bonus
Panama shift pattern
Pension & life cover
Modern, automated manufacturing environment
Apply now to join a forward-thinking engineering team and take the next step in your career.Aqumen Business Solutions is acting as an Employment Agency in relation to this vacancy.....Read more...
As an apprentice, you’ll work at a company and get hands-on experience. You’ll gain new skills and work alongside experienced staff.
What you’ll do at work:
This is a site-based role where you will be placed on a project according to your location where there is an Engineer to mentor you through the first stages in your Civil Engineering career.
Some of the day-to-day tasks are:
To provide sufficient information and set out for each gang on site to have continuity of work and inform Line Manager if this is not possible
To implement and comply with a safe system of work at site level and ensure operatives are briefed
To assist with site investigations
Communicating and liaising effectively with colleagues and the technical team, subcontractors, contracting civil engineers, consultants, co-workers and clients
To monitor the progress and quality of works on all sites against programme and specification
To ensure all works are signed off by the client prior to being accessed by follow-on trades
To liaise with subcontractors and provide them with sufficient information
To assist with risk assessments and writing method statements for all elements of work, assist in briefing the workforce and ensure that work is being carried out in line with RAMS on-site
To order materials in a timely manner for the site and ensure that waste is kept to a minimum
To participate in the weekly meetings regarding production targets, gang performance and future labour/plant/material requirements
To be proactive in obtaining all information is available in advance of works commencing
Keep the drawing register up to date and ensure all drawings used are the current revision
To be responsible for all site dimensional control and to ensure all works are installed to tolerances as set within relevant specifications
To maintain accurate as-built records of all works installed on-site
To record outputs and communicate them to the Senior Engineer/Project Manager
Using computer modelling software to analyse data
Fill in Natta QA documentation and any additional quality records required by the client
Training:
An apprenticeship includes regular training with a college or other training organisation
At least 20% of your working hours will be spent training or studying
Training Outcome:
Progression within the company, engineering more and more complex projects, leading on to project management of full schemes
Employer Description:We work in a fast-paced environment and this position will suit candidates that take on information quickly and flourish when working on multiple concurrent challenges. We undertake many different types of projects and would look to give you experience across multiple sectors or can target specialties if you have a particular interest. There are opportunities to train with other Engineers from all over the world and to build relationships with co-workers to broaden your support network, all encouraged by Natta.Working Hours :Monday to Friday, 07:30 – 17:00 (4 days on site, 1 at University).Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Physical fitness....Read more...
AV Installation Engineer - This is a new role in today for a friendly bespoke AV systems integration company. They are very busy at the moment and are looking to add to the team a new experienced member that has at least 1-2years high end residential audio visual experience. Ideally you will live in SURREY and happy to work in a professional environment that delivers a first client service to a discerning end user client base. You will ideally be able to install both CRESTRON and Lutron Lighting Systems. Your hands on skills need to be really good and if you also have experience with IT Home Networking that would be of interest. The role comes with a vehicle the the ability to drive is needed. If you are interested in working for a company where you will be in a team and not just a number then please send me your fully technical CV that clearly shows your audio visual skills.AV A/V A-V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL BESPOKE SMARTHOME AUTOMATION HOME CINEMA CONTROL4 RAKO SONOS LUTRON CRESTRON CI CUSTOM INSTALL INSTALLATION RACK NETWORKING WYRESTORM DRAYTEK CEDIA HERTS HERTFORDSHIRE LONDON....Read more...
Electrical & mechanical maintenance on production machinery
PLC basics, sensors, motors, and control systems
Preventive and reactive maintenance (TPM principles)
Fault diagnosis and continuous improvement techniques
Safe working practices in a food manufacturing environment
Training:Mechatronics Maintenance Technician Level 3.
1st Year - Full time at Gloucestershire Engineering Training
2nd to 4th year - Day release technical training at GET’s training centre
Practical workshop training in mechanical, electrical and multi-skilled engineering disciplines
On-site mentoring from experienced Maintenance Engineers, Team Leaders and GET assessors
Training Outcome:Upon successful completion, apprentices are often offered a full-time Maintenance Engineer or Maintenance Technician role, subject to performance.Employer Description:Schreiber Foods UK is a leading dairy manufacturer located in Stonehouse, Gloucestershire. We operate advanced food‑production facilities supplying major customers with high‑quality dairy products. Our team focuses on safety, innovation, and delivering consistent, reliable manufacturing performanceWorking Hours :Full-time, 40 hours per week.
Monday to Friday (typical shifts between 08:00–16:30, subject to operational needs) .
Occasional flexibility required to support production activities.Skills: Communication skills,Attention to detail,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Strong Interest in engineerig....Read more...
Learn by doing: Gain a recognized Level 3 Qualification (equivalent to A-Levels) while working on real projects
Get supported: You will be paired with a dedicated mentor who will guide your training and answer your questions
Contribute: Work in a collaborative environment where your ideas are heard and your contribution counts
Develop: Build the skills you need for a long-term career in engineering
Be active: You will test, diagnose and repair faults in electrified vehicles, both mechanical and electrical. You will perform maintenance activities
Training:Day release at a negotiable technical college, one day a week over three years, culminating in Level 3 C&G Diploma in Light Vehicle Maintenance and Repair plus appropriate Electrified vehicles certification.Training Outcome:
Electrified Vehicle Engineer
Workshop Manager
Employer Description:We are a modern vehicle repair and maintenance business, heavily technology driven and developing new tools and procedures for unaddressed problems.Working Hours :Typical hours Monday - Friday 09:00 - 17@00. May be on call as part of rota evenings and weekends.Skills: Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Non judgemental,Patience,Physical fitness....Read more...
Network Operations & Support (Skills)
Assist in the installation, configuration, monitoring, and maintenance of enterprise network infrastructure
Support data centre, campus, and wireless network environments
Perform first- and second-line troubleshooting of network incidents using a structured, logical approach
Assist with routine network maintenance, upgrades, and changes in line with approved procedures
Monitor network performance and availability, escalating issues where appropriate
Training:Day release online learning with QA.Training Outcome:IT Network Engineer.Employer Description:At the Mercedes-AMG Petronas Formula One Team, a group of passionate and determined people work to design, develop, manufacture and race the cars with the aim of fighting for world championships each and every year. Whether working in our Operations, Technical, Race or Business Support functions, we are all in and aspire to build the greatest team in the history of our sport.
Build your skills. Make an impact. Race towards excellence.
Every dream needs a team.Working Hours :Monday to Friday 08:30 to 17:30.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
Boomi Integration Developer – 6 Months Contract - £620 / Day (Inside IR35) – Remote Working
(Tech stack: Boomi Integration Developer, ERP, WMS, API, REST, SOAP, JSON, XML, CSV, Programmer, Full Stack Engineer, Architect, Boomi Integration Developer)
After 15 years’ experience in the fashion industry, our client has a mission to change the way people find clothes they love by combining technology with the personal touch of seasoned style experts. Our client is not merely concerned with supplying clothes, but truly believes in supplying a personal touch to every single customer. They are aiming to help customers save time, look great and evolve personal styles over time.
How? Our client is creating a new subscription service to supply tailored clothes with every fashion season. Every season our client prepares a box full of stylish pieces from well-loved brands, selected in accordance with each customers’ preselected unique fashion tastes. To achieve this, our client is looking for contract Boomi Integration Developer with experience in some or the following: ERP, WMS, API, REST, SOAP, JSON, XML and CSV.
The initial contract will be written for 6 months and extended thereafter.
Location: Remote Working
Rate: £620 / Day – Inside IR35
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
NOIRUKTECHREC
NOIRUKREC....Read more...
An opportunity has arisen for a Structural Surveyor to join a well-established civil and structural engineering consultancy delivering practical, design-led solutions from concept through to construction.
As a Structural Surveyor, you will assess buildings for structural concerns and produce detailed reports outlining findings and recommended remedial solutions.
This role offers a salary range of £35,000 - £40,000 and benefits.
What we are looking for
* Previously worked as a Structural Surveyor, Building Surveyor, Structural engineer, Disrepair Surveyor, Building Structural Surveyor, Structural Building Surveyor, Property Surveyor, Building Defects Surveyor or in a similar role.
* Proven experience surveying properties for structural issues
* Strong technical understanding of building structures and defects
* Ability to produce professional reports including remedial advice
* Good working knowledge of relevant building standards and regulations
This is a great opportunity to join a respected organisation offering stability, variety, and long-term potential.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An exciting opportunity for a Software Engineer to join a growing team developing marine-based systems used in complex, real-world environments. This role focuses on User Interface design and development, contributing to high-integrity, mission-critical software solutions that make a real impact.
Youll work across the full engineering lifecycle, from design and prototyping to delivery and support, as part of a multidisciplinary team building next-generation maritime technology.
What youll be doing
- Designing and developing high-quality software for marine-based applications
- Creating and refining user interfaces with a strong focus on usability and performance
- Supporting testing, integration and delivery of software solutions
- Collaborating with hardware and systems engineers to deliver cohesive, safe, and secure solutions
- Providing mentorship and technical guidance to junior team members
What youll bring
- Proven experience in software delivery using Java
- Strong understanding of software engineering principles, tools, and lifecycle processes
- Experience with UI/UX design, JavaFX, and UML design (Enterprise Architect experience a plus)
- Strong communication skills with the ability to engage users and stakeholders
- A proactive, team-oriented approach and commitment to high-quality outcomes
Desirable experience
- Java build systems (Maven) and version control (Git)
- Atlassian toolset (Jira, Bitbucket, Confluence)
- Database interfacing and service/subscriber architectures
- DevOps tools (Jenkins, SonarQube, Artifactory)
Why apply?
- Hybrid and flexible working arrangements (full-time, part-time, or condensed hours)
- Excellent development and progression opportunities
- Collaborative and supportive engineering culture
- Competitive salary and benefits
Security Clearance: Applicants must be eligible to obtain UK Security Clearance (SC).
TT....Read more...
Assist with the installation, maintenance, and repair of electrical equipment
Learn to work safely with tools, machinery, and electrical components
Support testing, inspections, and fault‑finding activities
Help assemble, and refurbish electrical fittings and apparatus
Training:Electrical Power Networks Engineer Level 4.Training Outcome:Anyone looking to build a long‑term future in electrical engineering, power systems, or infrastructure networks.Employer Description:OCU Group is one of the UK’s fastest-growing companies, delivering complex projects across power, utilities, water, and digital infrastructure. With sales growing five-fold to £1.1bn over the last five years, we are expanding both organically and through acquisitions, including recent growth in Australia and New Zealand.
For experienced professionals, OCU offers meaningful responsibility, the chance to influence delivery, and career progression in a business that invests in capability, autonomy, and high performance.
For those starting their careers, we provide structured routes through apprenticeships, graduate programmes, and training academies, with hands-on experience on real projects and supportive mentors to help you learn and progress.
We value safety, integrity, collaboration, and doing things properly and we support people who want to make a tangible impact.Working Hours :Monday to Friday 8am - 5pmSkills: Attention to detail,Organisation skills,Team working,Physical fitness....Read more...
A very varied career with tasks that will include the following:
Installation - setting out and fitting lifts, lifting gear, ancillary equipment, and commissioning equipment
Refurbishment - replacing or upgrading single or multiple lift components, panel displays, communication systems, buttons, control, drive, door systems, lighting etc
Dismantling and removal of lifts
Troubleshooting and breakdown repairs to all types of lift
Training:Lift and Escalator Electromechanic Level 3 Apprenticeship Standard:
On the job training with fully qualified and experienced lift engineers, regular assement from the training provider and day release at college to work towards an NVQ level 3
Training Outcome:
To become a qualified Lift engineer
Employer Description:We are a small company of 4 engineers who work on a contract basis for various Lift companies from the largest international to smaller independents.
We specialise in Modernisation and non-standard technically challenging installation of Lifts.
We travel from site to site usually in the north west and conditions will depend on the type of project ranging from construction sites to occupied buildings.Working Hours :Weekdays 07:15 - 15:30 (14:30 Friday). Occasional flexibility required.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience,Physical fitness....Read more...
Main Roles and Responsibilities:
Assemble electronic products using hand tools
Monitor the production process and perform quality checks
Follow assembly instructions to ensure products meet quality standards
Packing of goods for despatch
Support with the goods-in area
Maintain a clean and organised workspace
Training:
The candidate will work towards an Engineering apprenticeship
Diploma in Advanced Manufacturing Engineering (Development Knowledge) Level: 3 Extended Diploma in Advanced Manufacturing Engineering (Development Knowledge)
End point assessment
Blended on/off the job training and location to be confirmed.
Training Outcome:
Upon completion of this apprenticeshuipp the leaner will become a time served engineer
Employer Description:VREO Innovation Limited is a fast growth electronics engineering business based in Seaton Delaval, Northumberland. VREO delivers high-quality, innovative ANPR camera & bay monitoring solutions worldwide. A true disruptor, we build best-in-class products at competitive prices. With 13+ years experience across drones, aerospace (NASA), military (FLIR), oil & gas, and parking.
Our factory in Newcastle is where our product range are designed & built:Working Hours :Monday to Friday times to be agreedSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
An opportunity has arisen for a Structural Surveyor to join a well-established civil and structural engineering consultancy delivering practical, design-led solutions from concept through to construction.
As a Structural Surveyor, you will assess buildings for structural concerns and produce detailed reports outlining findings and recommended remedial solutions.
This role offers a salary range of £35,000 - £40,000 and benefits.
What we are looking for
? Previously worked as a Structural Surveyor, Building Surveyor, Structural engineer, Disrepair Surveyor, Building Structural Surveyor, Structural Building Surveyor, Property Surveyor, Building Defects Surveyor or in a similar role.
? Proven experience surveying properties for structural issues
? Strong technical understanding of building structures and defects
? Ability to produce professional reports including remedial advice
? Good working knowledge of relevant building standards and regulations
This is a great opportunity to join a respected organisation offering stability, variety, and long-term potential.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Step into a role where your engineering expertise directly shapes the success of metocean systems across some of the most dynamic offshore environments in the world. As a Senior Engineer (Systems) with Fugro, you will play a key part in delivering high quality metocean projects from office planning to offshore execution while ensuring that clients receive reliable, accurate and safe measurement solutions. This is a hands‑on and technically rich position where you will work with advanced instrumentation, Helideck monitoring systems and specialist software while supporting operations across the region, including regular offshore projects in West Africa.
You will be more than an engineer. You will be a trusted technical lead, a problem solver and a mentor. Whether you are building systems, leading site work, supporting vessel operations or coaching junior colleagues, you will bring a proactive mindset and a commitment to continuous improvement. If you thrive in environments where no two days look the same, enjoy taking ownership of equipment and site activities and want to work closely with project managers, clients and engineering specialists, this role offers the challenge, variety and impact you are looking for.
Your role and responsibilities:
Assist and support metocean projects in the office, onshore and offshore.
Ensure project delivery meets technical, commercial and client‑satisfaction requirements.
Coach and guide junior engineers in technical work and process improvements.
Lead system builds, site visits and vessel operations while liaising with clients and project teams.
Maintain strong competence in metocean instrumentation, Helideck monitoring systems and related software.
Undertake frequent offshore travel (70–100 days per year), including weekends when required.
Provide out‑of‑hours support based on project needs.
Support measurement campaigns as a second engineer.
Collaborate closely with Engineering Manager, Project Management and Engineering teams.
Plan, execute and deliver contractual tasks while supporting field staff and project leads.
Perform offshore duties as required by contracts.
Understand, service and maintain metocean equipment and electronics.
Assist senior engineers with deployment and recovery of buoys, Lidar, ADCPs and similar systems.
Complete equipment logs, site visit reports and perform basic troubleshooting.
Take responsibility for equipment used in assigned projects.
Conduct site work independently, including mobilisation and demobilisation.
Train junior engineers in site work, software and safe operational practices.
Assess risks dynamically and determine safe working methods.
Communicate effectively with project managers, technical support and clients on site.
Provide remote support to customers when required.
Assist project managers with organising site work, client discussions and equipment procurement.
Complete QHSE paperwork and permits.
Support large projects as a project assistant or project engineer, including documentation and design reviews.
Contribute technical and operational input to tendering.
Troubleshoot software issues and undertake out‑of‑hours duties when needed.
Write and review technical reports and data analysis outputs.
Peer‑review colleagues’ reports and datasets.
Process datasets and create meaningful data displays.
Compare processed data with other sources and develop peer‑review capability.
Comply with health, safety, environmental and quality management requirements.
Maintain a positive, professional attitude and support colleagues.
Promote teamwork and flexibility by taking on additional tasks when needed.
What you will need to thrive in this role:
Advanced oceanographic and metocean knowledge
Advanced operational planning capability
Advanced data acquisition and analysis skills
Expert‑level communication skills
Bachelor’s degree in oceanography, science, instrumentation, engineering, electrical, mechanical or equivalent vocational qualification
Relevant technical experience
GWO or BOSIET training
First Aid certification
Valid offshore medical (OGUK or ENG1)
IOSH certification
Working at Height certification
Full driving licence
COMPEX knowledge
18th Edition qualification
City & Guilds 2382‑22
City & Guilds 2365‑02
EngTech registration (or working toward it)
Proficient English language skills
Knowledge of regulations and electrical requirements for offshore platforms (PTW)
Experience working with both HV and LV systems on offshore platforms
Proficiency in extracting asset integrity data
About Us
Who we are Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. But we’re always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative but work well within a team.
What we offer
Fugro provides a positive work environment as well as projects that will satisfy the most curious minds. We also offer great opportunities to stretch and develop yourself. By giving you the freedom to grow faster, we think you’ll be able to do what you do best, better. Which should help us to find fresh ways to get to know the earth better. We encourage you to be yourself at Fugro. So bring your energy and enthusiasm, your keen eye and can-do attitude. But bring your questions and opinions too. Because to be the world’s leading Geo-data specialist, we need the strength in depth that comes from a diverse, driven team.
Our view on diversity, equity and inclusion
At Fugro, our people are our superpower. Their variety of viewpoints, experiences, knowledge and talents give us collective strength. Distinctive beliefs and diverse backgrounds are therefore welcome, but discrimination, harassment, inappropriate behaviour and unfair treatment are not. Everybody is to be well-supported and treated fairly. And everyone must be valued and have their voice heard. Crucially, we believe that getting this right brings a sense of belonging, of safety and acceptance, that makes us feel more connected to Fugro’s purpose ‘together we create a safe and liveable world’ – and to each other.
Benefits of joining our team
Extensive career & training opportunities.
Competitive salary
Contributory pension scheme
Private medical insurance
Health cash plan
Group life assurance
Group income protection
Flexible working hours and the potential to work 2 days a week from home in accordance with your manager and corporate policies.
Electric car scheme
Cycle to work scheme
Discounted gym membership
Discounts platform
The Fugro Card (pre-paid virtual visa card, which earns cash back automatically when money is spent at any participating retailers)
Enhanced maternity and paternity pay
Long service awards
Fugro values awards
Employee referral bonus scheme
Disclaimer for recruitment agencies:
Fugro does not accept any unsolicited applications from recruitment agencies. Acquisition to Fugro Recruitment or any Fugro employee is not appreciated
#LI-JM1Apply for this ad Online!....Read more...
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems. With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Engineering and Facilities Manager is responsible for directing all engineering activities and for maintaining and upgrading the facilities and production equipment. In addition, this position is responsible for maintaining/ advancing of a viable and visual Preventative Maintenance Program at the facility and identifying capital requirements for the annual capital plan. Responsibilities also include developing and assisting in value stream design and implementation of lean principles and tools within the manufacturing environment. This includes, but is not limited to, assisting with value stream mapping, employee training, continuous improvement event facilitation, waste identification and elimination, problem solving (through the scientific method), work area and station design and layout, visual control implementation, material flow, progress tracking and communication. Acts as a passionate advocate for a cultural change toward lean thinking throughout the organization.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Partner with LEAN leadership in eliminating unplanned production interruptions.
Use DAKOTA as the compliance tool to report incidents, near misses, and non-conformances, and to maintain compliance with EH&S.
Work with the maintenance crew to implement the needed preventative measures.
Recommend design modifications to eliminate machine or system malfunctions.
Prepare capital projects for submission to management. Included are costs, schedule, JHA, PHA, and procedures needed.
Serve as lead project engineer for approved capital projects with the goal of on-time and on-budget completion.
Develop and administer a viable and visual Preventative Maintenance Program that reduces downtime and improves overall reliability of production and production supporting machinery.
Responsible for identifying capital requirements for the facility's annual capital plan and budget.
Direct, review, and approve product design and changes consistent with MOC procedures.
Recruit departmental employees; assign, direct, and evaluate their work; and oversee the development and maintenance of staff competence.
Analyze annual site utility expenditure and develop plans to optimize plant efficiency to reduce costs (ISO 14001).
Perform administrative functions such as reviewing and writing reports, approving expenditures, enforcing rules, and making decisions about the purchase of materials or services.
Integrate the plant PHA initiative with the appropriate capital projects.
Investigate equipment failures and difficulties to diagnose faulty operation.
Interface with leadership, operators, and maintenance to develop needed TPM programs.
Support SPC, DOE's, and other Quality initiatives.
Lead Engineer for the production processes.
Develop facility infrastructure upgrade plan.
Other duties as assigned.
EDUCATION:
Bachelor's degree in Engineering required, preferably Mechanical, Chemical, or Electrical.
EXPERIENCE:
5-10 years of Facility and Process Engineering experience.
At least 1-2 years of supervisory experience.
Experience in Engineering Management.
Experience managing capital projects.
PHA and "Process Safety Management" experience preferred.
BENEFITS:
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to medical, dental, vision, life insurance, disability, vacation/PTO/sick days/parental leave, 401(k), employee stock purchase plan, and Company-provided pension plan. This position is bonus eligible.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Apply for this ad Online!....Read more...
Customer Service Administrator Salary: £12.27 per hour plus 25 days annual holiday entitlementHours - Full- Time Monday to Friday 8am to 5pmBased at Sheffield S9 1DTJob purpose:As part of a team, the Customer Service Administrator will support the Customer Service Team in delivering a consistently high level of service to users and the wheelchair service team and ensure administration is completed in an accurate and timely manner.Key responsibilities:
Answering the telephone and inputting any relevant information from the telephone call into the database on the computer.Develop strong relationships with the wheelchair service team.Update computer records for reconditioned and new wheelchairs.Raising job cards on the computer system and ensuring all details are correct and ready for the engineer to carry out the visit to the service user.Contact service users to arrange visits by the engineer for repairs, collections and deliveries.Filing or scanning all relevant paperwork and job cards, setting up and maintenance of filing systems as and when required.Ensure workloads are managed effectively and all daily tasks are completed.Maintain a professional customer service attitude when dealing with all service users and other agencies.Observe all regulations covering the confidentiality of the service user information accessed in undertaking the role.Agree to undertake all training offered that is necessary to maintain the skills required for this role.Liaise effectively between departments to ensure excellent customer service and information accuracy is maintained.
Skills and Qualifications
Computer literateGood communication, verbal and writtenExperience of invoicing and accounts proceduresExperience of working within a service provider industryFlexible approach to working conditions and working environment changeSelf-motivated and enthusiastic worker
ConfidentialityDuring the course of the work involved with this position, the role will become party to confidential information including service user information. It is of paramount importance that all information is kept on a private and confidential basis and not disclosed to any other person.OtherThis role involves contact with vulnerable people and access to their records and therefore it will be necessary for the company to obtain a satisfactory DBS check on all staff employed in this role. Service user/other agency/public engagement and involvement:Ross Care is committed to promoting and embedding equality, diversity and inclusiveness and expects that the post holder will actively promote and engage this commitment in all that they do. The post holder should ensure that in all their behaviours, attitudes and working they recognise and take account of the health needs and rights of all sections of the community including ethnicity, disability, gender, age, sexual orientation and religion/belief. The post holder will be expected to engage the service users, other agencies and the public where relevant and adhere to the Company’s policies and procedures governing zero tolerance to discrimination, harassment, bullying, stereotyping and prejudicial treatment. INDLS Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.....Read more...
An established engineering organisation operating within the maritime and defence sector is seeking a Senior Test Engineer to join its test and verification team. This is a fully onsite, hands-on engineering role, ideal for someone who enjoys working directly with hardware, test rigs, and live product testing rather than desk-based analysis alone.
You will play a key role in delivering robust testing and validation of complex mechanical products, supporting projects from early design through to final qualification.
The roleAs a Senior Test Engineer, you will provide technical leadership and hands-on expertise across test planning, rig design, execution, and reporting. You will work closely with project leads, engineers, suppliers, and third-party test facilities, ensuring products meet performance, quality, and reliability requirements.
This role sits within a fast-paced development environment and requires regular physical presence in the test facility. You will also support and mentor other test engineers and contribute to the continuous improvement of testing processes and capabilities.
Key responsibilities:
Capture test requirements from product specifications and engineering drawings
Support project reviews and provide technical input to test strategies
Develop detailed test plans, including rig allocation, scheduling, and hardware requirements
Design and produce bespoke test hardware (e.g. adaptor plates, test shafts) using CAD
Raise quotations and purchase orders for test and rig interface hardware
Create and review risk assessments to ensure testing is carried out safely and within operating limits
Assemble and operate test rigs, monitor live testing via data acquisition systems, and perform inspections at agreed intervals
Manage testing activities at external suppliers, OEMs, and third-party test facilities
Produce comprehensive test reports detailing methodology, data, conclusions, and recommendations
Present test results to internal stakeholders where required
Ensure compliance with QEHS requirements and promote 5S best practices
Actively support training and mentoring of junior engineers
Contribute to compliance with quality and environmental standards (e.g. ISO 9001, ISO 14001)
Support the ongoing development of the test facility as a centre of technical excellence
About you
You will ideally bring:
Proven experience in a Test Engineering environment
Strong hands-on experience with mechanical systems and test rigs
A degree (or preferably a Master’s) in a relevant engineering discipline
The ability to work independently with minimal supervision
Strong capability interpreting engineering drawings and designing test hardware using CAD
Confidence carrying out mechanical engineering calculations
Experience within the marine or defence engineering sectors (desirable)
Familiarity with test and monitoring tools such as LabVIEW or similar platforms
Hands-on experience with instrumentation and data capture equipment (e.g. thermocouples, LVDTs, tachometers)
Clear communication skills and the ability to work collaboratively across engineering teams
Strong report-writing skills with a high attention to detail
Commercial awareness and a practical, delivery-focused mindset
Willingness to undertake occasional travel
What’s on offer
A technically challenging, fully onsite and hands-on engineering role
Exposure to complex, high-integrity engineering products
The opportunity to influence test strategy and mentor others
A collaborative engineering environment focused on quality and continuous improvement
Long-term, permanent opportunity within a stable and growing organisation
If you are interested, please apply!
....Read more...
The TeamLocation: Newcastle
Apprenticeship: Building Services Design Engineer, Level 6
Training Provider: Teesside University
We are the world’s first engineering consultant to be certified carbon neutral, Cundall’s mission is to provide a pathway to net-zero-carbon for all the buildings we design. We need engineers who share this passion for sustainability to design this energy efficient, sustainable and cost-effective buildings.
The RoleThis is an excellent opportunity for an aspiring Mechanical Engineer to join our Newcastle office to learn what it takes to carry out the design of building services on some of the most exciting built environment projects in the UK and worldwide.
You will assist with mechanical building services engineering design and analysis and help define and translate client requirements into workable designs for buildings, facilities and services (heating, ventilation and air conditioning/cooling) all with sustainability at the forefront of the design.
You will be provided training by our expert engineers on how to perform engineering design and analysis and shown how to use drawing and calculation software such as Revit, Hevacomp and CYMAP.
As you develop your technical engineering skills with us on real-life projects, working four days of the week with one day-release to study for the appropriate academic qualifications at Teesside University.
Beyond your apprenticeship Cundall can offer you support towards achieving chartership status with CIBSE or IMechE, and in the long-term the opportunity for a truly rewarding and exciting career.
The SkillsTo be considered for the role you will be required to have either of the following:
Have at least three A levels at Grades A* - C (104 UCAS points) in STEM related subjects (Science/Technology/Engineering) and must have Mathematics A-Level
T-level (Merit or above) in Construction: Design, Surveying And Planning. (UCAS points: 120)
Completed a Level 3 BTEC
Completed an Apprenticeship as a Building Services Design Technician
Completed a HND qualification
Taken part in the PlanBee scheme you will also qualify for this course
You will also have:
Completed GCSEs in maths and English Language at Grade 4 or higher (Grade C)
During your studies/work experience you have developed a keen interest in engineering or construction
A keen interest in learning new skills and are willing to work hard to reach your goals
Possess the personal qualities and organisation skills to work under pressure and to tight deadlines, are a confident communicator, looking for a career in creative, sustainable, and intuitive design
Training Outcome:Beyond your apprenticeship Cundall can offer you support towards achieving chartership status with CIBSE or IMechE, and in the long-term the opportunity for a truly rewarding and exciting career.Employer Description:Established in the UK in 1976, Cundall is a global, independent, multi-disciplinary consultancy delivering sustainable engineering and design solutions across the built environment. Operating from 29 locations across the globe, our dedicated teams of over 1,000 consulting engineers and designer are empowered to act with flexibility and agility in delivering sustainable engineering and design solutions tailored to suit our clients’ individual needs. We are proud to be at the centre of pioneering design on some of the most exciting projects around the world. Cundall was founded with a commitment to sustainable design. In July 2023, Cundall publicly committed to achieving net zero carbon on all its projects by 2030. The pledge recognises the critical need for practical, science-led action to transition all buildings, infrastructure, and human settlements to net zero carbon as rapidly as possible.Working Hours :Monday to Friday
9am to 5pmSkills: Communication skills,Attention to detail,Analytical skills,Team working....Read more...
The TeamLocation: Manchester
Apprenticeship: Building Services Design Engineer, Level 6
Training Provider: University of Central Lancashire
We are the world’s first engineering consultant to be certified carbon neutral, Cundall’s mission is to provide a pathway to net-zero-carbon for all the buildings we design. We need engineers who share this passion for sustainability to design this energy efficient, sustainable and cost-effective buildings.
The RoleThis is an excellent opportunity for an aspiring Mechanical Engineer to join our Manchester office to learn what it takes to carry out the design of building services on some of the most exciting built environment projects in the UK and worldwide.
You will assist with mechanical building services engineering design and analysis and help define and translate client requirements into workable designs for buildings, facilities and services (heating, ventilation and air conditioning/cooling) all with sustainability at the forefront of the design.
You will be provided training by our expert engineers on how to perform engineering design and analysis and shown how to use drawing and calculation software such as Revit, Hevacomp and CYMAP.
As you develop your technical engineering skills with us on real-life projects, working four days of the week with one day-release to study for the appropriate academic qualifications at University of Central Lancashire.
Beyond your apprenticeship Cundall can offer you support towards achieving chartership status with CIBSE or IMechE, and in the long-term the opportunity for a truly rewarding and exciting career.
The SkillsTo be considered for the role you will be required to have either of the following:
A-Level: BBC including Maths and other science subject (such as physics, chemistry, further maths).General Studies accepted
T-level (Merit or above) in Construction: Design, Surveying And Planning. (UCAS points: 120)
BTEC Extended Diploma:Distinction, Merit, Merit
BTEC Diploma: Distinction*, Distinction*(to include Maths module).
International Baccalaureate Diploma: 28P including grade HL5 in Maths
GCSE: Maths & English C or equivalent
Apprenticeship as a Building Services Design Technician (Level 4)Completed a HND qualification.
Taken part in the PlanBee scheme you will also qualify for this course.
During your studies and/or work experience to date you have developed a keen interest in engineering and/or construction.
You have a keen interest in learning new skills and are willing to work hard to reach your goals.
You possess the personal qualities and organisation skills to work under pressure and to tight deadlines, are a confident communicator, looking for a career in creative, sustainable, and intuitive design.
Training Outcome:Beyond your apprenticeship Cundall can offer you support towards achieving chartership status with CIBSE or IMechE, and in the long-term the opportunity for a truly rewarding and exciting career.Employer Description:Established in the UK in 1976, Cundall is a global, independent, multi-disciplinary consultancy delivering sustainable engineering and design solutions across the built environment. Operating from 29 locations across the globe, our dedicated teams of over 1,000 consulting engineers and designer are empowered to act with flexibility and agility in delivering sustainable engineering and design solutions tailored to suit our clients’ individual needs. We are proud to be at the centre of pioneering design on some of the most exciting projects around the world. Cundall was founded with a commitment to sustainable design. In July 2023, Cundall publicly committed to achieving net zero carbon on all its projects by 2030. The pledge recognises the critical need for practical, science-led action to transition all buildings, infrastructure, and human settlements to net zero carbon as rapidly as possible.Working Hours :Monday to Friday 9am to 5pmSkills: Communication skills,Attention to detail,Analytical skills,Team working....Read more...
The TeamLocation: Birmingham
Apprenticeship: Civil Engineering Senior Technician (Level 4)
Training Provider: Coventry University
Cundall’s engineering teams pride ourselves on our exemplary track record of designing innovative and sustainable built environment solutions.
Our Structural teams are a source of world leading expertise; producing innovative and award-winning sustainable engineering solutions throughout the lifecycle of any building project – as well as offering a forward-thinking and collaborative approach to skill development, and professional excellence.
The Role:This is a fantastic opportunity for an aspiring Structural Engineer to join our Birmingham office to learn what it takes to engineer first-class design solutions on some of the most prestigious built environment projects in the UK and worldwide.
Working as a part of our established team of expert engineers and technicians, and with colleagues across our multi-disciplinary practice, you will gain a recognised qualification whilst working at the same time learning how to provide specialist consultancy input on projects across a wide range of sectors including education, residential, critical systems (data centres), retail, workplace, sculpture and rollercoasters.
As you develop your technical engineering skills with us on real-life projects, you will also be granted day-release to study for the appropriate academic qualifications at Coventry University.
Cundall can also offer you support towards achieving chartership status with the IStructE, and in the long-term the opportunity for a truly rewarding and exciting career.
The Skills:To be considered for the role you will be required to have either of the following:
maths & English at grade C/4 at GCSE
A‑Level grades at DDD (three D grades) must include Mathematics
BTEC National Extended Diploma: MMP (Merit, Merit, Pass) in Engineering/ Construction related subjects
During your studies and/or work experience to date you have developed a keen interest in engineering and/or construction
You have a keen interest in learning new skills and are willing to work hard to reach your goals
You possess the personal qualities and organisation skills to work under pressure and to tight deadlines, are a confident communicator, looking for a career in creative, sustainable, and intuitive design
We know that to be the best at what we do we need a diverse workforce underpinned by an inclusive culture. Creating environments where everyone can find joy doing their best work is also great for everyone. That’s why we positively welcome applications from people of all backgrounds and identities, and encourage, support, and celebrate the diverse voices of our people.Training Outcome:Cundall can also offer you support towards achieving chartership status with the IStructE, and in the long-term the opportunity for a truly rewarding and exciting career. Employer Description:Established in the UK in 1976, Cundall is a global, independent, multi-disciplinary consultancy delivering sustainable engineering and design solutions across the built environment. Operating from 29 locations across the globe, our dedicated teams of over 1,000 consulting engineers and designer are empowered to act with flexibility and agility in delivering sustainable engineering and design solutions tailored to suit our clients’ individual needs. We are proud to be at the centre of pioneering design on some of the most exciting projects around the world. Cundall was founded with a commitment to sustainable design. In July 2023, Cundall publicly committed to achieving net zero carbon on all its projects by 2030. The pledge recognises the critical need for practical, science-led action to transition all buildings, infrastructure, and human settlements to net zero carbon as rapidly as possible.Working Hours :Monday to Friday 9am to 5pmSkills: Communication skills,Attention to detail,Analytical skills,Team working....Read more...
