Our client, a long-established electronics manufacturing and product development organisation, are looking for an Electronics Laboratory Technician in Newbury to join their team on a permanent basis.
This is an excellent entry-level opportunity within a fast-paced innovation environment, supporting prototype development, testing, and laboratory activities, with clear progression towards a Junior Electronics Engineer role.
Key responsibilities of the Electronics Laboratory Technician job in Newbury:
Support prototype builds, PCB assembly, rework, and proof-of-concept activities.
Assist with board bring-up, testing, and basic fault finding under engineer guidance.
Carry out manual testing of electronic assemblies and embedded products.
Use laboratory equipment such as multimeters, oscilloscopes, and power supplies.
Perform soldering, de-soldering, and modification of prototype hardware.
Maintain laboratory equipment, tools, and stock in a safe and organised manner.
Record test results, build notes, and issue reports accurately.
Support component identification, BOM checking, and sample preparation.
Assist with PCB and assembly inspection to identify faults or quality issues.
Support EMC testing activities and operate test equipment where required.
Work closely with engineers, contributing to project discussions and continuous improvement activities.
Experience required for the Electronics Laboratory Technician job in Newbury:
Relevant qualification(HNC/HND, BTEC, T-Level, apprenticeship or similar) in Electronics or a related field.
Strong hands-on interest in electronics, testing, and product development.
Basic understanding of electronic components, circuits, and PCB assemblies.
Some experience using test equipment such as multimeters or oscilloscopes.
Practical soldering skills or willingness to develop these.
Good attention to detail and ability to follow technical documentation.
Strong communication skills and willingness to learn from experienced engineers.
Exposure to embedded systems, PCB design tools, or programming (e.G. Arduino, Python, C) would be advantageous.
If this Electronics Laboratory Technician job in Newbury could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816.....Read more...
Manufacturing Technician to maintain production tools and equipment also troubleshoot product, process or program defects and repair them.
Key skills
Read blueprints, identify components, perform wire preparation, stripping and crimping: perform harness repair and termination: use pertinent manual hand tools.
Electronics, hydraulics and mechanical assemblies, automated machine operation and programming.
Basic knowledge of Low Voltage and High Voltage Electronics.
Lean Six Sigma
Production Workflow
Production Test
Production Assembly ....Read more...
Manufacturing Technician to maintain production tools and equipment also troubleshoot product, process or program defects and repair them.
Key skills
Read blueprints, identify components, perform wire preparation, stripping and crimping: perform harness repair and termination: use pertinent manual hand tools.
Electronics, hydraulics and mechanical assemblies, automated machine operation and programming.
Basic knowledge of Low Voltage and High Voltage Electronics.
Lean Six Sigma
Production Workflow
Production Test
Production Assembly ....Read more...
We have an exciting opportunity for an Electrical Technician, competent at soldering, crimping and general wiring skills
Responsibilities
Perform soldering, crimping, and general wiring tasks for the installation, maintenance, and repair of electrical systems and downhole electronics equipment.
Conduct inspections and identify workmanship issues in downhole electronics equipment and processes.
Collaborate with engineers, electricians, and other team members to plan and execute electrical projects related to oil and gas operations.
Read and interpret electrical schematics, blueprints, and technical drawings specific to the oil and gas industry.
Requirements
High school diploma or equivalent: technical certification or associate degree in Electrical Technology or a related field is preferred.
Proficiency in soldering, crimping, and general wiring techniques.
Familiarity with electrical codes, regulations, and safety guidelines specific to oil and gas operations.
Experience working with downhole electronics equipment and processes....Read more...
We have an exciting opportunity for an Electrical Technician, competent at soldering, crimping and general wiring skills
Responsibilities
Perform soldering, crimping, and general wiring tasks for the installation, maintenance, and repair of electrical systems and downhole electronics equipment.
Conduct inspections and identify workmanship issues in downhole electronics equipment and processes.
Collaborate with engineers, electricians, and other team members to plan and execute electrical projects related to oil and gas operations.
Read and interpret electrical schematics, blueprints, and technical drawings specific to the oil and gas industry.
Requirements
High school diploma or equivalent: technical certification or associate degree in Electrical Technology or a related field is preferred.
Proficiency in soldering, crimping, and general wiring techniques.
Familiarity with electrical codes, regulations, and safety guidelines specific to oil and gas operations.
Experience working with downhole electronics equipment and processes....Read more...
Are you ready to advance your career in marine technology? Our partner are growing their national team of Marine Electronics Technicians and Engineers, whether you're just starting out or an experienced professional ready to lead projects and mentor others, we have the right opportunity for you.
Join a dynamic team that delivers cutting-edge navigation, communication, and safety systems to commercial vessels. Youll be working hands-on with industry-leading equipment, ensuring vessels remain operational, compliant, and connected. The company value initiative, technical skill, and a customer-first approach; if that sounds like you, we want to hear from you.
What Youll Be Doing:
- Installing and commissioning marine electronics on vessels
- Performing maintenance, repairs, and equipment surveys
- Supporting customers with diagnostics and fault resolution
- Identifying service opportunities and recommending solutions
- Delivering projects across the UK and occasionally overseas
What Were Looking For:
- HNC/HND in Electronics or Electrical Engineering (or equivalent)
- Experience in:
-
- Marine or field-based electronics
- Electronic navigation and communication systems
- Fault-finding and installation
- Technical support and project engineering
Skills:
- Strong problem-solving ability
- Clear communication and customer-focused mindset
- Essential: Full UK driving licence
Desirable (but not essential):
- GMDSS Operators Certificate
- Radio/VDR Survey or Class Approval experience
- BOSIET/OLF Certification
- Manufacturer-specific training
Medical: Must be able to pass a medical and annual working at height training
Whats On Offer:
- Competitive salary (based on qualifications and experience)
- Company car
- Employer contribution pension scheme
- Career development pathways from Technician to Senior Engineer
- Training opportunities and autonomy in your role
Apply now and be part of the future of marine electronics.
TT....Read more...
Are you ready to advance your career in marine technology? Our partner are growing their national team of Marine Electronics Technicians and Engineers, whether you're just starting out or an experienced professional ready to lead projects and mentor others, we have the right opportunity for you.
Join a dynamic team that delivers cutting-edge navigation, communication, and safety systems to commercial vessels. Youll be working hands-on with industry-leading equipment, ensuring vessels remain operational, compliant, and connected. The company value initiative, technical skill, and a customer-first approach; if that sounds like you, we want to hear from you.
What Youll Be Doing:
- Installing and commissioning marine electronics on vessels
- Performing maintenance, repairs, and equipment surveys
- Supporting customers with diagnostics and fault resolution
- Identifying service opportunities and recommending solutions
- Delivering projects across the UK and occasionally overseas
What Were Looking For:
- HNC/HND in Electronics or Electrical Engineering (or equivalent)
- Experience in:
-
- Marine or field-based electronics
- Electronic navigation and communication systems
- Fault-finding and installation
- Technical support and project engineering
Skills:
- Strong problem-solving ability
- Clear communication and customer-focused mindset
- Essential: Full UK driving licence
Desirable (but not essential):
- GMDSS Operators Certificate
- Radio/VDR Survey or Class Approval experience
- BOSIET/OLF Certification
- Manufacturer-specific training
Medical: Must be able to pass a medical and annual working at height training
Whats On Offer:
- Competitive salary (based on qualifications and experience)
- Company car
- Employer contribution pension scheme
- Career development pathways from Technician to Senior Engineer
- Training opportunities and autonomy in your role
Apply now and be part of the future of marine electronics.
TT....Read more...
Are you ready to advance your career in marine technology? Our partner are growing their national team of Marine Electronics Technicians and Engineers, whether you're just starting out or an experienced professional ready to lead projects and mentor others, we have the right opportunity for you.
Join a dynamic team that delivers cutting-edge navigation, communication, and safety systems to commercial vessels. Youll be working hands-on with industry-leading equipment, ensuring vessels remain operational, compliant, and connected. The company value initiative, technical skill, and a customer-first approach; if that sounds like you, we want to hear from you.
What Youll Be Doing:
- Installing and commissioning marine electronics on vessels
- Performing maintenance, repairs, and equipment surveys
- Supporting customers with diagnostics and fault resolution
- Identifying service opportunities and recommending solutions
- Delivering projects across the UK and occasionally overseas
What Were Looking For:
- HNC/HND in Electronics or Electrical Engineering (or equivalent)
- Experience in:
-
- Marine or field-based electronics
- Electronic navigation and communication systems
- Fault-finding and installation
- Technical support and project engineering
Skills:
- Strong problem-solving ability
- Clear communication and customer-focused mindset
- Essential: Full UK driving licence
Desirable (but not essential):
- GMDSS Operators Certificate
- Radio/VDR Survey or Class Approval experience
- BOSIET/OLF Certification
- Manufacturer-specific training
Medical: Must be able to pass a medical and annual working at height training
Whats On Offer:
- Competitive salary (based on qualifications and experience)
- Company car
- Employer contribution pension scheme
- Career development pathways from Technician to Senior Engineer
- Training opportunities and autonomy in your role
Apply now and be part of the future of marine electronics.
TT....Read more...
Test Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: PCB, Testing, Electronics
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We are seeking a skilled Test Engineer to join our client's team, who is responsible for developing test requirements, creating test instructions, and testing PCBs, assemblies, and systems. The ideal candidate will have a strong background in electronics and measurement technology, with practical experience in handling measuring equipment and a good understanding of radio frequency and power engineering.
Main Responsabilities:
Development of test requirements and new test methods in collaboration with the development department
Creation of test instructions and test reports
Testing, repairing (requires e.g. soldering skills) and commissioning of PCB’s, assemblies and systems as well as participation in tests in the test field
Checking production orders and goods receipt material according to quality characteristics
Perform factory inspections with customers
Management of measuring equipment storage
Construction of test facilities for the rationalization of test procedures
Required Competencies:
Completed technical training in the direction of electronics/measurement technology, technician school, an advantage
Practical experience in handling measuring equipment
Knowledge of radio frequency and power engineering is an advantage
Excellent knowledge of German and English
Positive attitude to work
Reliable team player with a pronounced quality awareness
Enjoy working independently
Benefits:
Competitive salary and benefits package – Up to CHF 110k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 80-110k + Bonus Benefits
Tech Stack: PCB, Testing & Electronics
Applicants for the Test Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/TESARG80110....Read more...
Technician required with electrical assembly experience and IPC certification.
Key skills
Soldering, crimping and general wiring skills.
Ability to apply basic arithmetic operations, compute ratio and rate, percentage, fractions and ratios, and calculate weights and measures, including Imperial to Metric conversions.
Electronics precision engineering workmanship practices.
Role will be to perform all Electronic Assembler duties under zero supervision. Following routings and records test measurements on PC based systems. Specifically to build and tests various components of a complex downhole drilling tools. ....Read more...
Technician required with electrical assembly experience and IPC certification.
Key skills
Soldering, crimping and general wiring skills.
Ability to apply basic arithmetic operations, compute ratio and rate, percentage, fractions and ratios, and calculate weights and measures, including Imperial to Metric conversions.
Electronics precision engineering workmanship practices.
Role will be to perform all Electronic Assembler duties under zero supervision. Following routings and records test measurements on PC based systems. Specifically to build and tests various components of a complex downhole drilling tools. ....Read more...
Working within different departments, as an Engineering Apprentice, you will support our existing team, whilst working towards a Level 3 Engineering and Manufacturing Support Technician Standards Apprenticeship.
As an Engineering Apprentice, you will support all production processes, whilst developing your own technical skillset. You will assist with technical support, production queries, identify and implement process improvements, and assist with standard operating procedures whilst working towards a Level 3 Business Administration Apprenticeship.
Support all production processes
Work within our Engineering, Manufacturing, and Quality teams with full support
Assist with technical support
Support with production queries
Identify and implement process improvements
Assist with standard operating procedures
Training Outcome:We are very keen to retain the apprentice once they complete the L3 Apprenticeship. There may be an opportunity for them to go onto the L4 apprenticeship, or they will start off as a Junior Engineer with the company.Employer Description:STI is a UK electronics manufacturer specialising in complex, mission-critical systems. We work UK Sovereign accredited facilities in Hook and Poynton, where our teams engineer, build and test full-system electronics for defence, aerospace and security programmes.
Our work ranges from PCB assembly and RF systems to wiring, cabinet build and complete integrated units.
We exist to give defence, aerospace & security customers total confidence in the electronics behind their most critical systems.Working Hours :Depending on age: Typical week is 37.5 hours per week. Working pattern to be confirmed, we have early finish Fridays (shouldn’t finish later than 1.30pm).Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience....Read more...
Manufacturing Technician required to perform technical duties in electronic, mechanical or systems production by completing tests, measurements, operations and process controls.
Requirements
Ability to read blueprints, identify components, wire stripping and crimping, harness repair and termination hand tools for electronics, hydraulics and mechanical assemblies,
Subsea Technology or Manufacturing Centre experience.
Production Workflow knowledge.
Responsibilities
Production Test and Assembly
Use job packets, routings, work orders, wire lists, quality and bills of material.
Maintain production tools and equipment.
Perform troubleshooting to diagnose product, process or program defects and repair them.....Read more...
PCB assembly and soldering of SMD Component Technician required to join a precision electronics engineering team in Gloucestershire.
My client is looking for an experienced Assembly operative for printed circuit board assembly and inspection.
Ideally experience in following areas
Manually populate and solder printed circuit boards.
Surface mount
Through hole components.
Solder fine pitch SMD components under microscope.
Preferably IPC certified.
Wiring cable looms and harnesses.
Cable assembly with crimp connectors and soldered connectors.
Box-build or final assembly consisting of printed circuit boards, cables, cases, displays and connectors.
Electromechanical assembly a plus.....Read more...
Manufacturing Technician required to perform technical duties in electronic, mechanical or systems production by completing tests, measurements, operations and process controls.
Requirements
Ability to read blueprints, identify components, wire stripping and crimping, harness repair and termination hand tools for electronics, hydraulics and mechanical assemblies,
Subsea Technology or Manufacturing Centre experience.
Production Workflow knowledge.
Responsibilities
Production Test and Assembly
Use job packets, routings, work orders, wire lists, quality and bills of material.
Maintain production tools and equipment.
Perform troubleshooting to diagnose product, process or program defects and repair them.....Read more...
PCB assembly and soldering of SMD Component Technician required to join a precision electronics engineering team in Gloucestershire.
My client is looking for an experienced Assembly operative for printed circuit board assembly and inspection.
Ideally experience in following areas
Manually populate and solder printed circuit boards.
Surface mount
Through hole components.
Solder fine pitch SMD components under microscope.
Preferably IPC certified.
Wiring cable looms and harnesses.
Cable assembly with crimp connectors and soldered connectors.
Box-build or final assembly consisting of printed circuit boards, cables, cases, displays and connectors.
Electromechanical assembly a plus.....Read more...
An RF Filter Alignment Technician is sought to join an innovative engineering team in Sedgefield, County Durham, contributing to the alignment, calibration, and testing of advanced RF, microwave and mmWave subsystems for mission-critical communication applications.
The RF Filter Alignment Technician, Sedgefield, County Durham, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices. This may include RF alignment techniques, microwave testing processes, calibration procedures, and production support within a high-technology manufacturing environment.
Responsibilities include:
Work with design, test, and production teams to support RF alignment and test activities.
Configure and operate RF and microwave test benches using spectrum analysers, network analysers, signal generators, power meters, and related instrumentation.
Perform alignment, tuning, and optimisation of RF/mmWave circuits, filters, amplifiers, transmit/receive units, and subsystems.
Develop and execute alignment and calibration procedures for prototypes and production units.
Debug and validate RF systems by troubleshooting component-level and board-level issues.
Collaborate with mechanical, electronic, and production engineering teams to improve manufacturability and testability.
Maintain comprehensive technical documentation, calibration logs, and test records.
Support production teams with technical queries, diagnostics, and maintenance of RF test equipment and test benches.
Assist with new product introduction (NPI) activities, supporting the transition from prototype to production.
Recommend and implement improvements to alignment processes, tooling, and test procedures.
Key skills & experience:
Qualification in Electronics, RF Engineering, or equivalent industry experience.
Proficiency with RF and microwave test equipment including network analysers, spectrum analysers, and signal generators.
Practical experience with RF alignment, calibration, and microwave measurement techniques.
Strong troubleshooting and fault-finding skills on RF and electronic assemblies.
Experience working within electronics manufacturing or production environments.
Understanding of RF parameters including gain, return loss, frequency response, noise, and spurious emissions.
Strong problem-solving and analytical skills.
Effective communication and teamwork abilities.
Positive attitude towards health and safety and continuous improvement.
How to apply:
Apply now for the RF Filter Alignment Technician role in Sedgefield, County Durham. Send your CV to adighton@redlinegorup.Com or call Adam on 01582 878821.....Read more...
We are seeking a proactive and detail-oriented individual to join our team as a Test Technician. In this role, you will provide essential support to lead Test Engineers in various tasks related to site preparation, maintenance, and testing activities. Your responsibilities will include but are not limited to:
Assisting in site preparation and maintenance tasks
Conducting pressure and control systems checks
Operating mechanical and steam vacuum systems
Performing instrumentation calibrations
Maintaining and operating steam boilers
Operating high-pressure gas and fluidic systems
Utilising electrical and electronic measurement and testing equipment
Skills and Behavioural Competencies:
Degree in Aerospace, Mechanical or Electrical Engineering, or equivalent
Experience working with high-pressure gas systems
Familiarity with electronics and High Voltage equipment
....Read more...
We are seeking a proactive and detail-oriented individual to join our team as a Test Technician. In this role, you will provide essential support to lead Test Engineers in various tasks related to site preparation, maintenance, and testing activities. Your responsibilities will include but are not limited to:
Assisting in site preparation and maintenance tasks
Conducting pressure and control systems checks
Operating mechanical and steam vacuum systems
Performing instrumentation calibrations
Maintaining and operating steam boilers
Operating high-pressure gas and fluidic systems
Utilising electrical and electronic measurement and testing equipment
Skills and Behavioural Competencies:
Degree in Aerospace, Mechanical or Electrical Engineering, or equivalent
Experience working with high-pressure gas systems
Familiarity with electronics and High Voltage equipment
....Read more...
Mechanical and Electrical Manufacturing Technician required to join a growing production team, supporting the build of equipment used in cutting edge marine and subsea applications. This is a hands on role ideal for someone with strong electronics assembly and wiring experience.
Responsibilities
Operate micro CNC machinery for precision component production
Solder PCBs and electronic circuitry to a high standard
Build and assemble wiring looms and cable harnesses
Follow manufacturing procedures, technical drawings, and circuit diagrams
Carry out PAT testing and quality inspections on circuitry and cables
Ensure all products meet strict quality and safety standards
Skills
Proven experience in electronic assembly or manufacturing
Strong PCB soldering and wiring skills
Ability to read and interpret circuit diagrams and engineering drawings
Experience with micro CNC machines.
High attention to detail and commitment to quality....Read more...
My client, a prominent technology engineering firm, is seeking to recruit a Production Technician to join their team at their headquarters in Hampshire.
As a Production Technician, based in Hampshire, you will be working through day-to-day tasks as established by the Production Supervisor of the working area, and in accordance with the production plan, on the wiring and assembly of production jobs.
Responsibilities for the Production Technician :
Working through day to day tasks in accordance with the production plan, on the wiring and assembly of production jobs.
Adhering to Quality standards, following set procedures & work flows at all times
Inspecting work in accordance with Inspection guidelines
Soldering, as required. Working towards IPC-620 standard (training will be provided)
Conducting procedural tests on production products
The ideal Production Technician candidate, based in Hampshire will have previous experience within a production/engineering environment, ideally with knowledge of electronics/soldering.
You will have strong attention to detail, communication and organisation skills, with an understanding of technical drawings desirable. You will be self-motivated, with the ability to work on your own initiative or as part of a team.
This Production Technician job, based in Hampshire is a fantastic opportunity to learn and develop new skills and increase your personal career development as part of a leading technology/engineering company so if you are interested, please apply today by emailing a copy of your up-to-date CV to rwilcocks@redlinegroup.Com or phone 01582 87 8810.....Read more...
We are looking for a skilled Manufacturing Technician to join our growing production team, supporting the build of equipment used in cutting-edge marine and subsea environments. This is a hands-on role ideal for someone with strong electronics assembly and wiring experience.
Key Responsibilities
Operate micro CNC machinery for precision component production
Solder PCBs and electronic circuitry to a high standard
Build and assemble wiring looms and cable harnesses
Follow manufacturing procedures, technical drawings, and circuit diagrams
Carry out PAT testing and quality inspections on circuitry and cables
Ensure all products meet strict quality and safety standards
Key Skills
Proven experience in electronic assembly or manufacturing
Strong PCB soldering and wiring skills
Ability to read and interpret circuit diagrams and engineering drawings
Experience with micro CNC machines (desirable)
High attention to detail and commitment to quality....Read more...
Our client is a highly respected engineering organisation specialising in the design and manufacture of advanced electronic systems.
Operating from a modern facility in Great Yarmouth, they support complex product development and manufacturing, delivering high-quality solutions with a strong focus on engineering excellence, reliability, and continuous improvement.
They are seeking a Diagnostics Technician to join a fast-paced engineering team, located in Great Yarmouth. This role focuses on component-level fault finding, root cause analysis, and supporting compliance, testing, and continuous improvement activities across complex electronic assemblies.
What you will be doing as a Diagnostics Technician, in Great Yarmouth:
Diagnose and fault-find electronic assemblies down to component level, including RF transmit/receive modules
Perform analysis using test equipment such as spectrum analysers, network analysers, and power meters
Support implementation of test setups and verification plans
Apply structured problem-solving techniques to identify root cause of failures
Drive corrective and preventive actions (CAPA) to closure
Analyse failure trends to improve yield, reliability, and quality
Support compliance, validation, and continuous improvement activities across diagnostics and production
The skills needed:
HNC/HND or Degree in Electronic Engineering or equivalent experience
Strong experience in electronics diagnostics and PCB-level fault finding
Proven ability to diagnose faults down to component level
Experience working within quality, compliance, or regulated environments
Strong problem-solving skills with a methodical and detail-oriented approach
APPLY NOW for the Diagnostics Technician role, in Great Yarmouth by emailing your CV to jthompson@redlinegroup.com or call 01582 878831.....Read more...
As a Light Vehicle (Van) Technician, you will service and repair all systems within a vehicle up to 3.5 tonnes, including engine and exhaust systems, air conditioning and electronics. Work will range from replacing parts to solving complex faults using diagnostic methods and equipment. With evermore-complex technologies, the tasks are constantly changing
You will learn the key principles, practices and skills that underpin the role before further developing and applying your skills in more complex situations
Training:
Working towards a Level 3 Service and Maintenance Light Vehicle Technician Apprenticeship, you will learn the key principles, practices and skills that underpin the role before further developing and applying your skills in more complex situations
If you have an apt for practical work, like to work independently but at the same time operate as a member of a team and offer good customer handling skills, then this could be the role for you!
Training Outcome:Completing an apprenticeship is just the start of your career at Mercedes-Benz.
Examples of some career paths our graduates have taken are:
Maintenance, System and Diagnostic Technicians
Service Team Leader
Service Manager
After Sales Manager
Employer Description:Mercedes-Benz is a globally recognised company whose range includes some of the most valuable brands in the automotive industry.Working Hours :To be confirmed by employer.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
As a Light Vehicle Technician, you will:
Service & repair all systems within the vehicle including engine & exhaust systems, air conditioning & electronics
Work will range from replacing parts to solving complex faults using diagnostic methods and equipment. With evermore-complex technologies, the tasks are constantly changing
You will learn the key principles, practices and skills that underpin the role before further developing and applying your skills in more complex situations.Training:Working towards a Level 3 Service and Maintenance Light Vehicle Technician Apprenticeship you will learn the key principles, practices and skills that underpin the role before further developing and applying your skills in more complex situations.
If you have an apt for practical work, like to work independently but at the same time operate as a member of a team and offer good customer handling skills then this could be the role for you!Training Outcome:Completing an apprenticeship is just the start of your career at Mercedes-Benz. Examples of some career paths our graduates have taken are:
Completing an apprenticeship is just the start of your career at Mercedes-Benz. Examples of some career paths our graduates have taken are:
Maintenance, System and Diagnostic Technicians
Service Team Leader
Service Manager
After Sales Manager
Employer Description:Mercedes-Benz is a globally recognised company whose range includes some of the most valuable brands in the automotive industry.Working Hours :TBC by employerSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
