Electrical Machine Principal Design Engineer required to take responsibility for technology specification, control and integration into fully electric automotive vehicles. You will provide novel motor systems into powertrain and vehicle performance technology simulation, selection and verification supporting electrical machine hardware and control decisions at powertrain and vehicle level.
Skills, qualifications and experience.
Degree or equivalent in Automotive, Electrical or Electronics Engineering.
Electrical Machine design experience
Electrical Machine technologies automotive integration into Hybrid and BEV applications.
Electromagnetic theory of electrical machines and motor control.
Electrical machine performance, NVH, cost etc.
Electrical machine thermal management.
Motor inverter design and motor control.
Electrical machine power electronic drives.
CAN/ CAN FD
Matlab or Simulink, Mathcad, Motorcad, Fluxmotor to accurately model electrical machine and system performance.
Hardware test case design and test equipment, oscilloscope, etc.
EMC and reliability.
Automotive Powertrain Control Development.
Role responsibilities
Electrical Machine technology leadership.
Lead and generate Electrical Machine Technical specification.
Lead Electrical Machine Simulation.
Lead Electrical Machine functional test specification
Support the development and delivery of electronic control architectures for diverse variants of powertrain architecture including hybrid, BEV ....Read more...
We are looking for a Junior PCB Design Engineer to support the design and development of hardware subsystems for mobile and fixed tracking antenna terminals. This role offers the opportunity to gain hands-on experience in PCB design, hardware integration, and system testing for advanced satellite communication technologies.
Key Responsibilities:
Assist in hardware design, PCB development, and system integration, working closely with senior engineers.
Support the testing and verification of hardware using lab equipment (oscilloscopes, spectrum analysers).
Contribute to design reviews, preparing technical documentation and reports.
Help ensure compliance with electrical and operational standards.
Work alongside Systems, Software, RF, and Mechanical engineers to develop innovative solutions.
Participate in training programs to enhance skills in hardware design and problem-solving.
Requirements:
Degree in Electronics, Telecommunications, or a related field
Interest in hardware engineering, with exposure to PCB design, embedded systems, or electronic components.
Familiarity with PCB design tools (Altium) is a plus.
Understanding of power supply design principles and power management circuits.
Experience with lab test equipment is an advantage.
Ability to work in a team and collaborate across disciplines....Read more...
Security Cleared Firmware Engineer – DSP Engineer - Cambridge – Spin-Out Company
A new Spin-Out company, based in Cambridge, providing product development for Security Cleared sectors, is currently looking for an experienced Firmware Engineer or DSP Engineer to work on a wide range of new technologies.
You will be working on a range of new technology inventions, providing expert approaches to Firmware Engineering and DSP Engineering applications. Due to the varied nature of the work, we ideally seek someone with knowledge of FPGA, DSP design and engineering, DSP Modelling, and design using embedded systems. Not all of these areas are required, but having experience in as many as possible in your past roles as a Firmware Engineer or DSP Engineer would be advantageous.
Specific experience working on high-speed electronic systems would be ideal but is not essential.
If you have previously worked in a security-cleared environment, it would be fantastic, although not essential as they are open to candidates from different sectors. However, you must be able to obtain security clearance. This usually means being a British Citizen or residing in the UK for five years in continuous employment. If you already hold security clearance from another source, this would be acceptable.
You are going to work on some extremely interesting projects that will help you continually develop your career. Apart from this, you will receive an excellent starting salary and a benefits package in line with the parent company, along with continuous career training for future progression.
We are looking for someone to start as soon as possible, so if you are interested, we recommend making an application now to avoid missing out. However, we understand you may have a long notice period, which can be normal in this sector.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on 0121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Quality Engineer – Cambridge – Medical Devices
We are currently looking for a Quality Engineer for a growing Medical Devices organisation based in Cambridge. The company work on a range of different Medical Devices, providing a variety of projects and tasks in your role.
You will collaborate various Medical Devices experts, including Mechanical Engineers, Physicists, Electronics Engineers, Software Engineers, and other professionals. Your primary focus will be on Quality Assurance of Medical Devices to ISO 13485 standards, although knowledge of EN 60601 would also be advantageous.
Your responsibilities will include creating technical files and testing documentation. If you have experience of Design Assurance, this would also enhance your approach to this work.
We would expect you to have a degree that led you into a Medical Devices Quality Engineering career. However. if you have another route into a Medical Devices role, we would still be keen to hear from you.
In addition to working on various Medical Devices, you will be rewarded with an excellent starting salary, a bonus, a generous pension, life assurance, healthcare, and other excellent benefits.
Given the anticipated interest in this role, if you are looking for a new opportunity, I suggest making an application now to avoid missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment, Science recruitment and Biotech recruitment specialists Newton Colmore Consulting, on +44 121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you.....Read more...
Embedded Software Consultant – Defence – Cambridge
A growing and technologically intriguing Defence company, based in Cambridge, is seeking experienced Embedded Software Consultants or Engineers to assist in the development of newly invented technologies that will enhance the defence and safety of the UK.
Your Embedded Software experience should be specifically in Embedded C. Ideally, you will have experience in the Defence sector; however, we are open to candidates from other complex sectors. It will be essential that you could obtain security clearance.
Knowledge of prototyping, using C, C++, MATLAB, or another software language will be highly advantageous.
It is expected that you hold a degree in a software or electronics field, or another field that would have led you into an Embedded Software Engineer role.
We are open to candidates at various levels of experience, ranging from those with a year or two of industry experience to more senior roles. The level of responsibility will depend on your level of experience and skills.
You will be working in a multi-discipline division, including mechanical engineers, software engineers, electronics engineers, physicists, and other industry professionals with whom you will be collaborate and learn from.
Due to the expansion of this team, it is an exciting time to join and will result in career growth and opportunities that arise from the company’s natural growth.
If you want to work on complex, industry-defining technologies while being offered an excellent starting salary, salary reviews, bonus, a pension, free lunches, and other outstanding benefits, I recommend submitting an application now to avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on 0121 268 2240 or make an application and one of our team at Newton Colmore will contact you. Please note we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
We are seeking a Verification Engineer with 10+ years of industry experience to join our growing verification team. You will have the opportunity to work on a variety of challenging and exciting projects, leading the verification process and driving innovative solutions for customers.
Key Responsibilities
Lead and support customer and internal verification projects using advanced methodologies such as Universal Verification Methodology UVM, SystemVerilog, constrained random, coverage driven, and assertion-based techniques.
Develop and implement comprehensive verification strategies, including architecting test environments, creating test benches, models, assertions, and functional tests.
Own the verification process, ensuring high quality execution across projects and collaborating with teams to meet customer requirements.
Mentor and lead junior engineers in the verification process, while also managing the progress and performance of verification tasks.
Skills
1st or 2.1 degree in Electronics, Physics, or Computer Science from a Tier 1 University.
10+ years of experience working in verification, with a strong background in UVM and SystemVerilog.
Expertise in constrained random verification, code coverage analysis, regression testing, and verification infrastructures.
Experience as a verification lead, responsible for planning and executing verification strategies.
VHDL or Verilog RTL experience.
Mentor Questa and Cadence Incisive.....Read more...
We are seeking a Verification Engineer with 10+ years of industry experience to join our growing verification team. You will have the opportunity to work on a variety of challenging and exciting projects, leading the verification process and driving innovative solutions for customers.
Key Responsibilities
Lead and support customer and internal verification projects using advanced methodologies such as Universal Verification Methodology UVM, SystemVerilog, constrained random, coverage driven, and assertion-based techniques.
Develop and implement comprehensive verification strategies, including architecting test environments, creating test benches, models, assertions, and functional tests.
Own the verification process, ensuring high quality execution across projects and collaborating with teams to meet customer requirements.
Mentor and lead junior engineers in the verification process, while also managing the progress and performance of verification tasks.
Skills
1st or 2.1 degree in Electronics, Physics, or Computer Science from a Tier 1 University.
10+ years of experience working in verification, with a strong background in UVM and SystemVerilog.
Expertise in constrained random verification, code coverage analysis, regression testing, and verification infrastructures.
Experience as a verification lead, responsible for planning and executing verification strategies.
VHDL or Verilog RTL experience.
Mentor Questa and Cadence Incisive.....Read more...
Senior Antenna / RF Engineer
Location: Lincoln, Lincolnshire, UK
An excellent opportunity for an experienced Senior Antenna / RF Engineer to join a newly established R&D capability within a leading global RF technology group. This role focuses on the design, simulation, and development of advanced antenna and RF subsystems across HF to SHF frequencies for applications including defence, aerospace, naval, space, and high-reliability electronic systems.
This position is ideal for a highly motivated, innovative, and hands-on engineer with extensive RF and antenna experience, who thrives on solving complex technical challenges, mentoring junior engineers, and shaping the development of a growing UK R&D team.
Main Responsibilities of the Senior Antenna / RF Engineer based in Lincoln, UK:
Lead the design, simulation, and development of antenna and RF systems from concept through to final delivery, including prototyping, testing, and production handover.
Act as technical lead on projects, managing design activities, making architectural decisions, and mentoring junior engineers.
Develop mixed-signal and system-level designs, including digital control and power subsystems, custom test hardware, and RF circuits (filters, amplifiers, switches).
Conduct PCB layout, population, and construction of prototypes.
Perform RF, antenna, and EMC testing, and oversee product qualification including environmental and functional testing.
Collaborate with electronics, systems, and other engineering disciplines to integrate solutions and ensure high-performance outcomes.
Produce technical reports, customer-facing documentation, and present findings internally or externally at conferences.
Support proposal generation, requirements development, conceptual design, and design reviews with customers and management.
Requirements of the Senior Antenna / RF Engineer based in Lincoln, UK:
Extensive experience in RF and microwave engineering and antenna system design.
Proficient in simulation and design tools such as CST, HFSS, Keysight Microwave Office, ADS, or similar.
Experience in MATLAB for modelling and analysis is highly desirable.
Strong practical, hands-on experience with real-world RF and antenna projects, including prototyping and test equipment development.
Experience leading design projects and mentoring junior engineers.
Comfortable working collaboratively across teams and communicating effectively with customers and senior management.
Experience in defence-related applications preferred; telecoms/network engineering not required.
Flexible, resilient, and highly accountable with a mission-oriented approach.
Fluent in English; additional languages beneficial.
Strong understanding of electromagnetic theory, physics, and mathematics.
To apply for this Senior Antenna / RF Engineer role based in Lincoln, UK, please send your CV to: kchandarana@redlinegroup.com or call 01582 878 830 / 07961 158 784
....Read more...
RF Engineer – Senior
Location: Bradford, West Yorkshire (Hybrid)
An exciting opportunity has arisen for a Senior RF Engineer to join a specialist UK electronics company working on advanced RF and microwave systems. The company designs, develops, and delivers high-performance RF solutions across multiple industries, including defence, aerospace, and communications.
This role is ideal for a technically skilled engineer with hands-on experience in RF design, testing, and integration who thrives in a collaborative, high-precision engineering environment.
Main Responsibilities of the RF Engineer – Senior (based in Bradford):
Design, analyse, and optimise RF circuits and subsystems across microwave frequency bands (1GHz–18GHz).
Develop and implement low-noise amplifiers (LNAs), power amplifiers (PAs), mixers, filters, oscillators, and synthesizers.
Conduct RF system architecture and front-end design, balancing performance, cost, power, and size.
Execute RF simulation, modelling, and statistical analysis using industry-standard tools (Keysight ADS, AWR Microwave Office, CST, HFSS).
Perform RF testing and validation using spectrum analysers, VNAs, signal generators, power meters, and noise figure analysers
Troubleshoot RF issues at component, PCB, and system level and correlate lab measurements with simulations.
Collaborate with PCB layout engineers to ensure controlled impedance, grounding, shielding, and overall RF performance.
Support EMC, EMI, and regulatory compliance testing and certification activities.
Mentor junior RF engineers and contribute to technical design reviews, reports, and customer documentation.
Requirements of the RF Engineer – Senior (based in Bradford):
Proven experience in RF design, 1GHz–18GHz frequency range, with LNAs, PAs, mixers, filters, oscillators, and synthesizers.
Strong understanding of RF system design, linearity, noise figure, intermodulation, and spectral purity.
Hands-on experience with RF test equipment and measurement techniques.
RF PCB layout knowledge and experience integrating RF designs into larger mixed-signal or digital systems.
Proficiency with RF CAD/simulation tools (Keysight ADS, AWR Microwave Office, CST, HFSS).
Experience with scripting/programming for RF analysis or test automation (Python, MATLAB, LabVIEW).
Excellent problem-solving skills, attention to detail, and ability to communicate complex RF concepts clearly.
Experience in mentoring or leading RF work packages preferred.
Understanding of product development lifecycle, cost, risk, and schedule management.
Ability to work independently as well as collaboratively across multidisciplinary teams.
To apply for this RF Engineer – Senior role based in Bradford, please send your CV to: nking@redlinegroup.Com or call 01582 878 839....Read more...
Senior Quality Engineer – Cambridge – Medical Devices
We are currently looking for a Senior Quality Engineer for a growing Medical Devices organisation based in Cambridge. The company work on a range of different Medical Devices, providing a variety of projects and tasks in your role.
You will collaborate various Medical Devices experts, including Mechanical Engineers, Physicists, Electronics Engineers, Software Engineers, and other professionals. Your primary focus will be on Quality Assurance of Medical Devices to ISO 13485 standards, although knowledge of EN 60601 would also be advantageous.
Your responsibilities will include creating technical files and testing documentation. If you have experience of Design Assurance, this would also enhance your approach to this work.
We would expect you to have a degree that led you into a Medical Devices Quality Engineering career. However. if you have another route into a Medical Devices role, we would still be keen to hear from you.
In addition to working on various Medical Devices, you will be rewarded with an excellent starting salary, a bonus, a generous pension, life assurance, healthcare, and other excellent benefits.
Given the anticipated interest in this role, if you are looking for a new opportunity, I suggest making an application now to avoid missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment, Science recruitment and Biotech recruitment specialists Newton Colmore Consulting, on +44 121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you.....Read more...
Medical Devices – Senior Mechanical Design Engineer – Cambridge
Due to successful growth plans, a Medical Devices organization based in Cambridge is currently seeking a Senior Mechanical Design Engineer to contribute to the development and improvement of life-saving Medical Devices.
Collaborating closely with other industry experts, such as electronics design engineers, software engineers, physicists, and other Medical Devices specialists, you will tackle some of the most complex challenges in the development of new Medical Technologies.
Ideally, you will have a background in developing new Medical Devices throughout the entire design life cycle, adhering to ISO 13485 standards. If you have not worked on Medical Devices, we will consider candidates from other highly regulated industries such as life sciences, robotics, product development, etc.
For the 3D CAD elements of your role, you will primarily use SolidWorks. Familiarity with this tool would be advantageous, but we are open to considering other 3D CAD tools if you have a proven track record of quickly acquiring new skills.
When discussing complex problems, it would be beneficial if the Medical Devices you have worked on have involved fluidics, mechanism design, thermal issues, FEA, or other intricate applications. We do not expect you to have experience in all of these areas; they are just a few examples of the challenges you may encounter.
This company is experiencing growth but remains at a size where your work will significantly impact the company's success and projects. Therefore, we are seeking a team player accustomed to collaborating with diverse individuals both within and outside of the organization.
While continually facing challenges, you will advance your skills at the forefront of the sector. In addition to this, you will receive an excellent starting salary, a bonus (typically around 20%, recently even higher), BUPA healthcare, a pension plan, a generous holiday allowance, and other outstanding benefits.
Salary will be commensurate with experience, and we welcome applications from candidates with a few years of industry experience to those with over twenty years of experience. Finding the right fit is more important to us than a specific number of years of experience.
It is expected that you hold a degree in addition to any industry experience. If you also possess a PhD, it would be welcomed but is not essential.
Interviews will be conducted as soon as a suitable candidate is identified. If you are interested in exploring this role, we recommend submitting your application and CV. Please note that your CV will not be forwarded to the company until after we have discussed the role and the company in detail.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at 0121 268 2240. Alternatively, you can submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialised recruitment company operating in the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Battery Test Equipment Service and Calibration Engineer required to repair and calibrate AC and DC Power Sources and Loads, Battery Test Equipment, and related equipment on premises and customer sites across the UK. You will also contribute to UKAS accreditation calibration procedures for new equipment and accreditation scope expansion.
Experience
Over 2 years hands on Calibration and Instrumentation experience in servicing, testing, and calibrating electronic and electrical instruments.
National and international calibration standards ISO 17025 and the ability to apply these standards to calibration tasks.
Test and measurement instruments multimeters, oscilloscopes, AC/DC power supplies, insulation testers, etc.
Fault finding in both analogue and digital electronics, interpreting electronic circuit schematics and performing component-level repairs.
Calibration and Documentation detailed reporting using calibration certificates and validation documents.
Calibration software and Microsoft Office tools Excel and Word for reports.
Electrical and electronic components, with the ability to repair faulty instruments to the highest standards.
Driving License: A valid UK driving license to facilitate on-site visits and transportation of equipment.
Responsibilities
Repair power electronic equipment to component level.
Calibrate AC to DC Power Equipment, Battery Test Equipment, and other related instruments to ensure their accuracy and reliability.
Travel to customer sites about 2 weeks per month for calibrations and on site support.....Read more...
Battery Test Equipment Service and Calibration Engineer required to repair and calibrate AC and DC Power Sources and Loads, Battery Test Equipment, and related equipment on premises and customer sites across the UK. You will also contribute to UKAS accreditation calibration procedures for new equipment and accreditation scope expansion.
Experience
Over 2 years hands on Calibration and Instrumentation experience in servicing, testing, and calibrating electronic and electrical instruments.
National and international calibration standards ISO 17025 and the ability to apply these standards to calibration tasks.
Test and measurement instruments multimeters, oscilloscopes, AC/DC power supplies, insulation testers, etc.
Fault finding in both analogue and digital electronics, interpreting electronic circuit schematics and performing component-level repairs.
Calibration and Documentation detailed reporting using calibration certificates and validation documents.
Calibration software and Microsoft Office tools Excel and Word for reports.
Electrical and electronic components, with the ability to repair faulty instruments to the highest standards.
Driving License: A valid UK driving license to facilitate on-site visits and transportation of equipment.
Responsibilities
Repair power electronic equipment to component level.
Calibrate AC to DC Power Equipment, Battery Test Equipment, and other related instruments to ensure their accuracy and reliability.
Travel to customer sites about 2 weeks per month for calibrations and on site support.....Read more...
Principal Mechanical Design Engineer – Medical Devices – Cambridge
A growing Medical Devices team, based in Cambridge, is currently seeking an experienced Mechanical Design Engineer to lead the development of cutting-edge Medical Devices in the fields of Health Technology, Biotech, and Wearable Tech.
The ideal candidate will have a proven track record of developing devices to ISO 13485 standards that have successfully reached the market, spanning various sectors within Medical Devices.
In addition to past experience in inventing and designing Medical Devices, candidates are expected to hold a degree in a relevant field that led them into Mechanical Design or the Medical Devices industry.
You will collaborate with a multidisciplinary team of experts, including Industrial Designers, Electronics Engineers, Physicists, Software Engineers, and Scientists. Some projects may require you to take the lead, which is why this is a principal-level design engineer role.
This company places a strong emphasis on providing continuous training and development to help you advance your career. In addition to career development and the opportunity to work on cutting-edge technologies, you will receive an excellent salary, annual bonuses, healthcare coverage, gym membership, an enhanced pension, and other outstanding benefits.
The company's expansion is driven by successful growth plans, including the construction of brand-new labs.
If you are seeking an exciting and challenging career, we recommend submitting an application now to start the recruitment process.
The organisation frequently creates roles for individuals with the right skills. Therefore, even if you believe the role may be slightly too senior or junior for you, we encourage you to apply so that we can explore potential opportunities together.
For further information, please do not hesitate to contact Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at 0121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will be in touch.
Newton Colmore Consulting is a specialist recruitment company focused on the Medical Devices, Science, and Machine Learning fields.....Read more...
The Test Engineer will join a Systems Engineering team critical in space thruster engine development. You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components. This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop. Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc. Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integration, Manufacturing and Inspection Flow Charts.
Review, interpret, manage and own the spacecraft requirements then disseminate down to relevant engine subsystem or component teams.
Coordinate of top level Design, Verification and Compliance Matrix.
Internally digest key subsystem and component review documentation ensuring work is completed to required standards and all aspects of the engine system are correctly aligned.
Lead customer interactions and engine level reviews also manage supplier technical queries in conjunction with the appropriate resource.....Read more...
Senior Mechanical Design Engineer
Location: Lincoln, Lincolnshire, UK
An excellent opportunity for an experienced Senior Mechanical Design Engineer to join a global RF technology group as part of a specialist R&D team in the UK. This role focuses on designing and developing advanced mechanical solutions for RF, antenna, and electronic systems used across aerospace, defence, naval, space, and medical applications.
This position is ideal for a highly motivated and innovative engineer with extensive experience in mechanical design for demanding environments, who thrives on solving complex technical challenges and working collaboratively with multidisciplinary teams across international sites.
Main Responsibilities of the Senior Mechanical Design Engineer based in Lincoln, UK:
Lead and contribute to the mechanical design of RF, antenna, and system products from concept through CAD, prototyping, fabrication, and final assembly.
Collaborate closely with RF and electronics engineers to optimise designs for challenging applications and integrate systems effectively.
Produce detailed CAD models, drawings, and analysis for strength, vibration, thermal behaviour, environmental performance, and compliance with military standards (e.G., MIL-STD-810).
Support proposal generation with concept CAD, analysis, and presales input.
Develop and optimise prototypes, models, fixtures, and specialised test equipment.
Oversee environmental and mechanical testing, verification, and product qualification.
Work directly with suppliers and manufacturing partners to ensure high-quality fabrication and testing.
Industrialise designs and manage handover to production, including documentation, training, and assembly instructions.
Produce technical reports, customer-facing documentation, and participate in design reviews with customers.
Requirements of the Senior Mechanical Design Engineer based in Lincoln, UK:
Bachelor’s degree in Mechanical Engineering (Master’s preferred).
Extensive experience in mechanical product design, ideally within defence, aerospace, naval, or space applications.
Proven ability to deliver designs from concept to CAD, fabrication, and final assembly.
Experience in design for environmental requirements including vibration, shock, humidity, and ingress protection.
Strong expertise in environmental qualification, product testing, and verification.
Mastery of CAD tools (e.G., Solidworks, Autodesk Inventor).
Knowledge of composites, structures, aerospace, robotics, or electromechanical systems.
Practical experience in prototyping, machining, and assembly.
Experience working with suppliers, machinists, and toolmakers.
Proven track record of working directly with customers in a consultative and collaborative manner.
Excellent problem-solving skills, resilience, and attention to detail.
Desirable Experience:
Shipborne, maritime, or space-related equipment.
Thermal, ingress, corrosion, and EMC considerations in enclosure design.
Mechanical design of healthcare-related products.
Experience with FEA tools and MATLAB.
To apply for this Senior Mechanical Design Engineer role based in Lincoln, UK, please send your CV to: kchandarana@redlinegroup.Com or call 01582 878 830 / 07961 158 784....Read more...
Are you an experienced Mechanical Development Engineer looking for your next challenge? This is an exciting opportunity to join a growing engineering team and play a key role in developing innovative, high-quality mechanical products from concept through to production.
Looking for a motivated and detail-oriented Mechanical Development Engineer to lead the mechanical design and development of sensor-based products. You will be responsible for delivering cost-effective, manufacturable designs that meet both customer and internal specifications. This role involves full product lifecycle management — from initial concept and prototyping through to documentation, supplier engagement, and supporting production teams.
Key responsibilities for the Mechanical Development Engineer based in Northants:
Lead mechanical design and product development activities, collaborating closely with electronics engineers.
Produce and test prototypes as required.
Create and manage technical documentation including BOMs, drawings, datasheets, FMEAs, technical files, and compliance documents.
Manage projects to agreed timescales, budgets, and specifications.
Maintain technical ownership of designs throughout the lifecycle, supporting production and customer delivery.
Apply design-for-manufacture and cost-control principles without compromising on quality.
Liaise with external suppliers and identify new supply partners when necessary.
Support the design or sourcing of bespoke tooling for assembly processes.
Produce clear assembly instructions for production teams.
Set up parts within ERP systems.
Ensure compliance with ISO requirements and internal processes.
Key skills required for the Mechanical Development Engineer based in Northants:
Degree in Mechanical Engineering, Mechatronics, or a related field.
Extensive experience in a mechanical design or engineering development environment.
Proven track record of delivering products from concept through to market launch.
Experience in prototyping, testing, and validation.
Proficiency with 3D CAD (SolidWorks preferred).
Knowledge of injection moulding, CNC machining, and sheet metal design.
Strong computer literacy (Microsoft Office/365/Teams, ERP systems).
Excellent communication skills, both written and verbal.
Highly self-motivated with the ability to manage multiple projects independently.
Strong attention to detail with a “right first time” approach.
Ability to work at pace and take initiative when faced with design challenges.
Benefits
27.5 days annual leave + bank holidays
Private medical insurance
Bonus scheme
Pension
Death benefit & income protection
The position is for a senior Mechanical Development Engineer who thrives in a fast-paced environment, is confident working independently, and enjoys taking full ownership of mechanical design projects.
APPLY NOW! To apply for the Mechanical Development Engineer based in Northants, please send your CV to mbelmar@redlinegroup.Com, or for more information contact Mike Belmar on 01582 878807 or 07961 158782.....Read more...
Mechanical Engineer – Cancer Instrumentation – Cambridge
A growing division within an established Medical Devices organisation in South Cambridge is currently seeking an experienced Medical Devices Mechanical Engineer to contribute to their ongoing development of cutting-edge cancer instrumentation, aimed at improving patient recovery rates.
This company is expanding its team dedicated to Medical Devices Instrumentation, primarily focusing on Cancer Instrumentation. Ideally, they are looking for candidates with prior experience in Medical Devices Instrumentation. However, they are open to considering candidates who have worked on other types of Medical Devices, provided they were developed to ISO 13485 standards.
The company offers state-of-the-art labs and workshops to facilitate your success in developing these life-saving technologies. You will also receive ongoing training and development to ensure you stay at the forefront of technological advancements.
In addition to relevant experience, it is expected that you hold a relevant degree in mechanical engineering or a related field that has prepared you for a career within the Medical Devices sector.
As mentioned, you will be working on life-saving technologies, benefiting from continued career and skills development, and rewarded with an excellent starting salary, pension, life assurance, bonuses, healthcare, dental coverage, and other benefits typically associated with large multinational organisations.
Due to the anticipated high level of interest in this role, we recommend that if you are interested, you submit your application promptly and specify the types of Medical Devices you have experience working on.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Industrialisation Test Engineer – London (Greenwich) – £35-40 per hour (Umbrella) - Temp to Permanent
About the Role:
We are delighted to invite applications for the role of Industrial Test Engineer to join our client’s diverse and inclusive team. In this role, you will support the industrialisation and launch of new high-reliability products by developing innovative test solutions and providing technical support to production.
You will work closely with teams across R&D, Production, Quality, and external suppliers to ensure our products meet the highest standards of quality, safety, and reliability.
Why Join Us?
Work as part of an innovative, supportive, and diverse team delivering high-reliability products.
Thrive in a culture that values equity, diversity, inclusion, and wellbeing.
Access opportunities for professional development and career progression.
Receive a competitive salary and benefits package.
Responsibilities:
Design, install, commission, and integrate hardware and software for test benches.
Develop comprehensive test documentation including instructions, specifications, drawings, and verification plans.
Collaborate with Health & Safety teams to ensure test solutions meet safety standards.
Deliver new test solutions to production teams and provide ongoing technical support.
Liaise with Submerged Equipment Design (SED) and Technical Leaders to resolve test failures and product performance issues.
Provide hands-on debugging and support for test systems during manufacturing.
Train and support manufacturing staff on new test processes and equipment.
Maintain and update databases related to test software and equipment, and report on progress to technical leadership.
What you need for the job:
Degree in Electronics, Optical, Software Engineering, or a related discipline.
Proven experience in test development within a production environment.
Proficiency in developing and maintaining test programs using National Instruments LabVIEW and TestStand.
Experience designing and applying production test equipment.
Understanding of electromechanical production processes.
Experience with fibre optics or high/low voltage testing is advantageous.
....Read more...
Field Service Engineer
Electrical / Electronics & Mechanical
Location: Shropshire / Black Country / Midlands / CentralPackage: Circa (£45k ££neg) + Vehicle f/expensed + Benefits + Career Prog + Continuous Training + Development + Private Health Care
Join a leading Class A OEM specialising in designing, developing, and manufacturing world-class precision machine tools for the manufacturing sector. As technology advances rapidly, we have an exciting opportunity for a highly skilled electrical/electronics professional to contribute to the design, development, and fault-finding processes on exceptionally complex, electrically powered precision machine tools.
What We’re Looking For:
Electrical fault-finding expertise – Priority
Proficiency in reading electrical schematic drawings
Strong IT skills (networking, fault-finding)
Understanding of mechanical systems and machinery and Precision Engineering
Experience in test and commissioning
Understanding of PLC controls and control functionalities
Knowledge of installing full turnkey lines, interconnecting several pieces of machinery to form a production line ensuring all safety measures and meeting industry standards & conformity
Desired Skills:
PLC programming experience (Beckhoff, Siemens, Allen Bradley, Fanuc, ABB)
Ability to design electrical circuits on CAD
Knowledge of UKCA / CE standards
Understanding of Mechanical Applications and work with Mechanical Machinery
Soft Skills:
Can-do attitude
Precise attention to detail
Problem-solving expertise for complex issues
Here’s the future vision….
Based at our new UK HQ centrally located, this role offers tremendous potential and serves as a springboard into higher positions within our international manufacturing business.
Ready to elevate your career? Apply today and join a team that’s pushing the boundaries of precision engineering!
Meet the employer:
Short 20 min bite sized meet the employer sessions will be organised with our exclusive recruitment partner, Glen Shepherd. Please get in touch via CV submission & arrange your pre-interview session NOW.
Tel 07977 266309 /
JOB REF: 4312GS
Glen Callum Associates is committed to creating diverse and inclusive workplaces. We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background. We believe that a variety of perspectives makes a team stronger and a workplace better. If you need any adjustments during the recruitment process, please let us know – we’re here to support you.....Read more...
Field Service Engineer
Electrical / Electronics & Mechanical
Location: Shropshire / Black Country / Midlands / CentralPackage: Circa (£45k ££neg) + Vehicle f/expensed + Benefits + Career Prog + Continuous Training + Development + Private Health Care
Join a leading Class A OEM specialising in designing, developing, and manufacturing world-class precision machine tools for the manufacturing sector. As technology advances rapidly, we have an exciting opportunity for a highly skilled electrical/electronics professional to contribute to the design, development, and fault-finding processes on exceptionally complex, electrically powered precision machine tools.
What We’re Looking For:
Electrical fault-finding expertise – Priority
Proficiency in reading electrical schematic drawings
Strong IT skills (networking, fault-finding)
Understanding of mechanical systems and machinery and Precision Engineering
Experience in test and commissioning
Understanding of PLC controls and control functionalities
Knowledge of installing full turnkey lines, interconnecting several pieces of machinery to form a production line ensuring all safety measures and meeting industry standards & conformity
Desired Skills:
PLC programming experience (Beckhoff, Siemens, Allen Bradley, Fanuc, ABB)
Ability to design electrical circuits on CAD
Knowledge of UKCA / CE standards
Understanding of Mechanical Applications and work with Mechanical Machinery
Soft Skills:
Can-do attitude
Precise attention to detail
Problem-solving expertise for complex issues
Here’s the future vision….
Based at our new UK HQ centrally located, this role offers tremendous potential and serves as a springboard into higher positions within our international manufacturing business.
Ready to elevate your career? Apply today and join a team that’s pushing the boundaries of precision engineering!
Meet the employer:
Short 20 min bite sized meet the employer sessions will be organised with our exclusive recruitment partner, Glen Shepherd. Please get in touch via CV submission & arrange your pre-interview session NOW.
Tel 07977 266309 /
JOB REF: 4312GS
Glen Callum Associates is committed to creating diverse and inclusive workplaces. We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background. We believe that a variety of perspectives makes a team stronger and a workplace better. If you need any adjustments during the recruitment process, please let us know – we’re here to support you.....Read more...
Field Service Engineer
Electrical / Electronics & Mechanical
Location: Shropshire / Black Country / Midlands / CentralPackage: Circa (£45k ££neg) + Vehicle f/expensed + Benefits + Career Prog + Continuous Training + Development + Private Health Care
Join a leading Class A OEM specialising in designing, developing, and manufacturing world-class precision machine tools for the manufacturing sector. As technology advances rapidly, we have an exciting opportunity for a highly skilled electrical/electronics professional to contribute to the design, development, and fault-finding processes on exceptionally complex, electrically powered precision machine tools.
What We’re Looking For:
Electrical fault-finding expertise – Priority
Proficiency in reading electrical schematic drawings
Strong IT skills (networking, fault-finding)
Understanding of mechanical systems and machinery and Precision Engineering
Experience in test and commissioning
Understanding of PLC controls and control functionalities
Knowledge of installing full turnkey lines, interconnecting several pieces of machinery to form a production line ensuring all safety measures and meeting industry standards & conformity
Desired Skills:
PLC programming experience (Beckhoff, Siemens, Allen Bradley, Fanuc, ABB)
Ability to design electrical circuits on CAD
Knowledge of UKCA / CE standards
Understanding of Mechanical Applications and work with Mechanical Machinery
Soft Skills:
Can-do attitude
Precise attention to detail
Problem-solving expertise for complex issues
Here’s the future vision….
Based at our new UK HQ centrally located, this role offers tremendous potential and serves as a springboard into higher positions within our international manufacturing business.
Ready to elevate your career? Apply today and join a team that’s pushing the boundaries of precision engineering!
Meet the employer:
Short 20 min bite sized meet the employer sessions will be organised with our exclusive recruitment partner, Glen Shepherd. Please get in touch via CV submission & arrange your pre-interview session NOW.
Tel 07977 266309 /
JOB REF: 4312GS
Glen Callum Associates is committed to creating diverse and inclusive workplaces. We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background. We believe that a variety of perspectives makes a team stronger and a workplace better. If you need any adjustments during the recruitment process, please let us know – we’re here to support you.....Read more...
Senior Physicist –Thermofluidics
A leading innovator of complex scientific instrumentation ais looking for an experienced Physicist/Engineer to join their team.
We are considering physicists with two years of industry experience through to senior people for this brief.
As a Physicist you will be involved in all aspects of the design and development of the company’s scientific products. This will include inventing brand-new products, simulation and analysis, prototype design and lab testing.
You will get the chance to apply your experimental and analytical physics knowledge to solve real-world problems and you will be applying your experience to products that aim to change the game.
To be considered for this exciting role you will need to have a solid understanding of physics fundamentals with good knowledge of fluid mechanics and thermofluidics. This will ideally be coupled with a strong academic record and experience within a commercial setting
In exchange for your skills and expertise, the company offer a highly competitive package as well as providing excellent career progression and training as well as providing a platform for you to work on start of the art technologies and testing equipment.
For more information, make a confidential application now and a member of our team will be in touch with more information.
Newton Colmore is a highly specialist recruitment consultancy operating within the medical devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors throughout Europe and the US.
....Read more...
A growing space engineering team in the UK is seeking a Simulation Software Engineer to support the development of high-fidelity spacecraft simulators used for mission design, verification, and operations. Youll work alongside software and aerospace engineers to develop simulation tools, integrate flight software, and ensure robust, reliable simulator performance for upcoming spacecraft missions.=
What Youll Do
- Design, implement, and test spacecraft simulators as part of a multidisciplinary engineering team
- Develop and integrate simulation software aligned with mission and subsystem requirements
- Validate, configure, and deploy simulator builds into operational environments
- Create scripts based on operational scenarios to support testing and training
- Maintain simulator performance and availability for engineering and operational users
- Develop startup and configuration scripts for different operational modes and system setups
Essential Skills
- Degree in Computer Science, Electronics, or another relevant STEM discipline
- 2+ years of experience in software engineering or real-time software development, ideally within modelling/simulation
- Strong debugging and profiling experience on Linux
- Proficiency in modern C++ (C++14 or later)
- Solid understanding of object-oriented programming, UML, and design patterns
- Experience with test-driven development
Desirable Skills
- Experience with ECSS SMP, SIMULUS Suite, or other spacecraft simulation frameworks
- Familiarity with Agile development tools and methodologies
- Knowledge of ECSS-E-70 (PUS) and SCOS MIB
- Linux system administration, shell scripting, Makefiles
- JavaScript scripting experience
Whats on Offer
- Opportunity to work with a highly talented, international engineering team
- Flexible working around core hours in a supportive, collaborative environment
- Optional 9/75 working pattern
- Hybrid working arrangements (role-dependent)
- 25 days annual leave + 8 bank holidays (increasing with tenure)
- Private healthcare (taxable benefit), life insurance, long-term sick pay
- Relocation allowance and potential visa sponsorship
- Access to modern office and cleanroom facilities
- Regular social events and a positive team culture
TT....Read more...
An exciting opportunity to start your career in technical sales and engineering solutions with a leading UK-based electromechanical products provider based in Essex. Supplying to the Aerospace, Defence, Communications, Rail, and Industrial sectors, we operate within an engineering-led, ISO9001:2015-certified environment focused on delivering complete customer solutions.
This training role is perfect for someone eager to develop a career in technical sales. You’ll learn how to manage customer relationships, understand technical specifications, and support the sales process under the guidance of experienced engineers.
Key Responsibilities
Support customer enquiries, quotations, and proposals.
Learn to interpret technical datasheets and product specifications.
Assist with product demonstrations and presentations.
Maintain CRM records and track the sales pipeline.
Conduct market research and qualify opportunities.
Shadow senior engineers on client calls and visits.
Skills & Experience
0–3 years’ experience in sales, engineering, or technical support (graduates welcome).
Interest in electromechanical systems or engineering solutions.
Strong communication, numeracy, and problem-solving skills.
Proficient in Microsoft Office, especially Excel.
Desirable
Degree or HND/HNC in Engineering, Electronics, or related field.
Awareness of industrial, defence, or manufacturing sectors.
Personal Attributes
Enthusiastic and eager to learn.
Customer-focused, organised, and proactive.
A collaborative team player with attention to detail.
Training & Development
Mentoring from senior sales staff.
Product and manufacturer training.
Clear progression to Technical Sales Engineer or Account Manager roles
If you would like to know more about this opportunity please send over an email with your cv to nking@redlinegroup.Com or call 01582 878839 / 07961158788.....Read more...
