A new and exciting opportunity has become available for a Lead Firmware Engineer job, based in Nottinghamshire required to join a growing and dynamic business.
The Lead Firmware Engineer will join an award-winning team of creative engineers working on high tech electronic solutions.
Essential Skills needed for the Nottinghamshire based Lead Firmware Engineer job include:
- Strong Experience in developing Software using Embedded C.
- Strong Communication Skills.
- Experience in Developing Software for Bare metal.
- Degree in Software Development, Electronics, or other relevant fields.
- Experience mentoring junior engineers
During their employment, the Lead Firmware Engineer will be given the opportunity to work on and learn:
- Advancing Knowledge of Ethernet, TCP/IP and other advanced networking protocols.
- Exposure with Bare metal and Linux
This is a unique job opportunity for a Lead Firmware Engineer, to take the next step in their career working in a hybrid working environment, with a business that has an outstanding record for the development and support of their staff.
If you would like more information on the Lead Firmware Engineer Job based in Nottinghamshire, or if you would like to apply for the Lead Firmware Engineer job, please contact Ricky Wilcocks on 01582 878810 or email on RWilcocks@redlinegroup.Com, otherwise we always welcome the opportunity to discuss other engineering jobs.....Read more...
RF Design Engineer required, ideally Senior level to work on defence, military and avionics communications for long range real time video new product design and development. You will join a successful RF and Hardware Design team and work across the full product lifecycle from requirements through design, test, release and support of RF systems.
Requirements
British citizen eligible for security clearance
Radio Frequency System Architecture
RF Simulation
Altium Electronics Schematic capture, PCB Layout and Footprint or symbol Creation
Real time long range data link knowledge
High resolution video transfer understanding.
RF inhibitor exposure.
Bachelors or Masters degree in Engineering or related subject.
Role
RF Design for New Product Introduction or NPI and the evolution of existing world class RF systems for defence and aviation.
RF System Architecture exploiting the latest RF components and technologies.
RF Simulation using tools such as LabVIEW.
Schematic capture and PCB Design Layout in Altium.
Linear high power wide band RF amplifiers up to 200 Watts using for example GaN or LDMOS.
RF filter design.
Radio Transmitter and Receiver Design.
LNA, Down converter and Upconverter design.
Antenna design.
Use of oscilloscopes, analysers and signal generators.
Cadence AWR Microwave Office.
Ansys HFSS.
Switch mode PSUs, embedded circuitry, glue logic, analogue electronics and EMC circuitry.....Read more...
RF Design Engineer required, ideally Senior level to work on defence, military and avionics communications for long range real time video new product design and development. You will join a successful RF and Hardware Design team and work across the full product lifecycle from requirements through design, test, release and support of RF systems.
Requirements
British citizen eligible for security clearance
Radio Frequency System Architecture
RF Simulation
Altium Electronics Schematic capture, PCB Layout and Footprint or symbol Creation
Real time long range data link knowledge
High resolution video transfer understanding.
RF inhibitor exposure.
Bachelors or Masters degree in Engineering or related subject.
Role
RF Design for New Product Introduction or NPI and the evolution of existing world class RF systems for defence and aviation.
RF System Architecture exploiting the latest RF components and technologies.
RF Simulation using tools such as LabVIEW.
Schematic capture and PCB Design Layout in Altium.
Linear high power wide band RF amplifiers up to 200 Watts using for example GaN or LDMOS.
RF filter design.
Radio Transmitter and Receiver Design.
LNA, Down converter and Upconverter design.
Antenna design.
Use of oscilloscopes, analysers and signal generators.
Cadence AWR Microwave Office.
Ansys HFSS.
Switch mode PSUs, embedded circuitry, glue logic, analogue electronics and EMC circuitry.....Read more...
Mechanical Design Engineer – Solidworks
Are you a Mechanical Design Engineer with provable experience using SolidWorks and a passion for developing precision products?
Do you want to join a pioneering, Aberystwyth based company specialising in advanced measurement and instrumentation solutions?
Reporting directly to the Technical Director, you will play a key role in the design and development of new products while supporting continuous improvement of existing mechanical systems and assemblies.
Key Responsibilities for this Mechanical Design Engineer – Solidworks role in Aberystwyth, Wales:
Design and develop mechanical components and assemblies using SolidWorks
Produce detailed engineering drawings, tolerances, and BOMs for manufacture
Support new product introduction from concept through to production
Collaborate closely with electronics, manufacturing, and test teams
Requirements for this Mechanical Design Engineer – Solidworks role based in Aberystwyth, Wales:
Provable experience in a mechanical design engineering role
Strong working knowledge of SolidWorks and mechanical drafting standards
Degree in Mechanical Engineering or a related discipline
Experience designing precision components for instrumentation or manufacturing environments (desirable)
To apply for this Mechanical Design Engineer role, Please email NDrain@redlinegroup.Com or call Nick on 01582878828....Read more...
Electrical Engineer/Designer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: Zuken E3 or E-PLAN P8
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek an experienced Electrical Design Engineer or Elektroplaner with Zuken E3 or E-Plan expertise to join our team. The successful candidate will be responsible for developing schematic drawings and Bills of Materials (BOMs) for complete systems. This role's primary focus will be creating high-quality schematic drawings and BOMs with a good understanding of the Low Voltage Directive.
Requirements:
Higher Technical School Qualification or Apprenticeship in Electrical Engineering
4+ years of experience in electrical design engineering
Strong understanding of electrical design principles, including circuit analysis and design
Proficiency in Zuken E3 or E-PLAN, with expertise in creating schematic drawings and BOMs
Knowledge of the Low Voltage Directive and relevant electrical safety standards
Excellent communication and collaboration skills
Ability to work independently and as part of a team
Strong problem-solving and analytical skills
Familiarity with design automation tools and methodologies
Nice to Have:
Bachelor's or Master's degree in Electrical Engineering or a related field
Experience with PCB design and layout
Knowledge of electrical testing and validation procedures
Familiarity with industry-standard design tools and software
Certification in electrical engineering or a related field
Benefits:
Competitive salary and benefits package – Up to CHF 120k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 100 -130k + Bonus Benefits
Tech Stack: Zuken E3, E-PLAN, PCB
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/EDARG100120....Read more...
Motor Drives Engineer required to work on algorithms and systems for direct drive permanent magnet electric motors.
Control algorithm experience distributing torque and optimising energy efficiency would be ideal.
Requirements
Electric Vehicle development experience CAN Bus communications, electrical powertrains and control experience.
MATLAB and Simulink
Harness design process knowledge
Degree in software development, electronics, motor control or automotive engineering.
Responsibilities
Design, verification and validation of electric vehicle controls systems.
Development of torque vectoring traction control and ABS.
Brake by wire research and modelling.
Electrical power system architecture
Software development in Simulink, hardware in the loop, HIL, dyno and firmware across the vehicle.....Read more...
Mechanical Design Engineer – Genomics Instrumentation – Cambridge
A growing biotechnology company, based in Cambridge, is currently looking for an experienced Mechanical Design Engineer to support the development of cutting-edge genomics instrumentation.
You will be working within a multidisciplinary team of engineering experts, including physicists, electronics engineers, software developers, and life sciences specialists. You’ll be a key member of the team, contributing to the design and development of innovative devices that enable high-throughput genomic workflows and precision diagnostics.
We’re looking for someone with experience in product design and development, ideally within medical devices, diagnostics, or scientific instrumentation. A background in mechanical engineering is essential, and experience working in regulated environments (ISO 13485, FDA QSR) would be highly beneficial.
The ideal candidate will have a few years of industry experience and be looking to take the next step in their career. You’ll be involved in the full product lifecycle—from concept development and prototyping through to design for manufacture and product launch.
You’ll be rewarded with a competitive salary, regular salary reviews, bonus scheme, pension, life assurance, and other excellent benefits you’d expect from a growing, forward-thinking organisation.
This is a fantastic opportunity to join a company that invests in its people and is making a real impact in the field of genomics. Due to expected interest, I recommend applying now to avoid missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices and Scientific recruitment at Newton Colmore Consulting, on +44 121 268 2240, or make an application and one of our team will be in touch.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors.....Read more...
Are you an experienced Power Electronics or Complex Electronics engineer looking to take the next step in your career? Join a leading telecoms company that designs and delivers subsea network cable infrastructure used by global communications providers.
In this role, you will develop System Technical Functional Specifications (TFS) and guide the design of complex electronic systems. You’ll work across multiple engineering disciplines, ensuring that all requirements are met, conflicts are resolved, and designs align with the bigger picture. Your ability to balance different priorities and make informed architectural decisions will be key to delivering robust, reliable systems.
What you’ll do:
Develop and maintain System Technical Functional Specifications (TFS) and ensure traceability across all engineering functions.
Coordinate with electrical, software, firmware, and mechanical teams to resolve design conflicts and ensure seamless system integration.
Take a holistic view of system requirements, assessing the impact of design choices on performance, reliability, cost, and manufacturability.
Support testing, validation, and risk analysis to ensure high-quality, robust system designs.
Provide technical leadership and guidance across multidisciplinary teams.
What we’re looking for:
Strong experience in Power Electronics or complex electronics systems.
Proven ability to develop technical specifications and work across multiple engineering disciplines.
Excellent problem-solving, analytical, and decision-making skills.
Effective communication and stakeholder management – able to explain technical decisions clearly and resolve conflicts.
Experience with system architecture, integration, and validation is highly desirable.
Why this role?
Work with cutting-edge subsea telecoms infrastructure in a leading, global company.
Hybrid working with 3 days per week onsite.
Competitive salary: £80,000 – £82,000 + £6k car allowance and 10% bonus.
Opportunity to shape the system architecture and influence key engineering decisions.
....Read more...
Redline has an extraordinary opportunity for a Contract FPGA Engineer based in Oxfordshire, with a specialist scientific company who are at the forefront of groundbreaking scientific experiments.
This contract will not accept candidates operating via a PSC, therefore you will be required to work via an Umbrella company.
This is a great opportunity to work with technology that you will not find anywhere else in the UK. The company is currently undertaking the biggest project in their history, a multimillion pound investment in their future, and they need you to come on board and help them make it a success.
You will be responsible for overseeing the design of FPGAs as well as having input in the wider design of electronics including Schematics and PCB layout. The FPGAs will need to be interfaced into power supplies for an extremely high speed piece of scientific instrumentation.
Key skills required for the Contract FPGA Engineer position based in Oxfordshire:
- Experience in Xilinx Vivado
- Experience with VHDL
- Experience with serial comms
For more information or to apply for the Contract FPGA Engineer opportunity based in Oxfordshire, please contact Jack Kelly – jkelly@redlinegroup.Com / 01582 878812 quoting reference JWK1061.....Read more...
An exciting opportunity has arisen for an PCB Design Engineer with a leading Specialist Contract Electronic Manufacture (CEM) with established customer partnerships in a range of industry sectors.
This is a largely remote based role, the PCB Design Engineer, Luton, Bedfordshire will be responsible for the development of PCB designs for both new and existing products for a variety of major OEM’s covering market sectors including Automotive, Clean Energy, Communication & Broadcasting, Consumer, Defence & Aerospace, Homeland Security, IP Development Platforms, Medical, Scientific Research & Space.
The successful PCB Design Engineer, Luton, Bedfordshire will have designed products for manufacture, accustomed to working to deadlines and able to communicate with customers effectively.
You will have a proven background in creating PCB designs / Schematics, across a wide range of industries. You will have experience of designing with high-speed digital design, analogue or complex circuits, including fine pitch components (BGA) and high pin count devices. Along with this the successful applicant will be familiar with PCB fabrication and assembly process with supporting knowledge of Design for Manufacture & Test.
APPLY NOW for the PCB Design Engineer for our client based in Luton, Bedfordshire role please send your CV to TDrew@redlinegroup.Com or call Tom on 01582 878 848 quoting ref. THD1357, if you have any specific questions about this role, otherwise we always welcome the opportunity to discuss other Electronics jobs.....Read more...
An urgent job as a Field Service Engineer has arisen covering the South West of England area for a company specialising in capital equipment.
An exciting new job has arisen for a Field Service Engineer, covering the South West of England for a leading provider of high-tech production solutions within the electronics industry. This role will play a crucial role in providing technical support and maintaining our cutting-edge equipment at customer sites across the South West of England.
The ideal Field Service Engineer, covering the South West of England will have;
A background in either Field Servicing of capital equipment of a electro-mechanical and software nature or a background in Process / SMT Engineering looking to transition into a field service position
Strong knowledge of troubleshooting and repairing complex electrical and mechanical systems.
Proficiency in reading technical drawings, schematics, and manuals.
This is for a company that prides themselves as a dynamic and fast-growing company with a strong focus on research and development. They have established themselves as an industry pioneer, delivering state-of-the-art equipment and services to our global customer base
APPLY NOW! For the Field Service Engineer job covering the South West of England by sending a cover letter and CV to TDrew@redlinegroup.Com or by calling Tom Drew on 01582 878848 quoting ref. THD1359. Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 01582 878 848 for a confidential discussion.....Read more...
Are you a Software professional with a background in DSP and have exposure to developing 5G applications?
If so I’d like to speak with you!
A well-established R&D organisation who are also a market leader, are looking to rapidly expand their engineering team and as such are seeking an Embedded Software Engineer to join their development team near Leicestershire.
As an Embedded Software Engineer you will have a background in Digital Signal Processing and a working knowledge of communications systems engineering. To successful candidate for the Embedded Software Engineer job will have a mixture of embedded/bare metal experience alongside an understanding of implementing communication signal processing algorithms such as DDCs, filters, FFTs.
Skills/Experience required for the Embedded Software Engineer job include:
- BEng/BSc or MSc/Meng within Engineering (Ideally Electronics, Telecommunication or similar)
- Experience in DSP Algorithm simulation and 5G development
- Experience in Bare Metal/ Embedded C
- Experience with RF a bonus
Experience of the following would be advantageous:
- Cross compilers (C++ ARM cross-compiler GCC Version 4.3.3)
- FreeRTOS experience
- Experience with typical embedded control peripherals (i.E. RAM, Flash, UART, PWM, A/D, CAN, I2C and SPI)
- Cortex M3/M4 Microcontrollers or similar.
- Experience of efficient implementation of communications DSP algorithms (such as FFT, filtering DDC etc.) In VHDL
This is a fantastic opportunity to join a well-established, highly profitable company investing heavily in R&D. This is a great chance for a Embedded Software Engineer to join a consistently growing technology company offering great training and career progression opportunities.
To apply for the Embedded Software Engineer job please send your CV to Ricky Wilcocks, rwilcocks@redlinegroup.Com or phone 01582 87 8810 or alternatively 079317 88834.....Read more...
Electrical Field Service Engineer
Location: South London
Sector: EV Infrastructure
Salary: £39-50,000 Plus Company Vehicle and Fuel Card
Job description
An organisation is seeking an Electrical Field Service Engineer to commission, maintain, fault-find and repair EV charging equipment across the UK, including AC chargers, Rapid DC, Ultra, and High-Power Charging (HPC) units.
This role suits a hands-on engineer with a strong electrical background who can work autonomously on customer sites, delivering reliable, high-quality technical support. The Field Service Engineer will help ensure charging assets remain safe, compliant, and performing at their best, meeting both company and client expectations.
The work will take place in a range of environments, including outdoor locations and occasional confined spaces. Travel is required, with some overnight stays.
Essential
- NVQ Level 3 Electrical qualification
- Minimum 2 years experience in a field-based engineering role (commissioning, maintenance, or repair of electrical systems/equipment)
- Proven ability to work independently on client sites, diagnosing and resolving issues without direct supervision
- Experience working in SLA-driven environments
- Competent with basic test and measurement tools (e.g., multimeters, voltage testers)
- Strong fault-finding and problem-solving skills, including complex technical diagnostics
- Confident communicator with good customer-facing skills
- Effective time management, particularly when travelling between sites
- Full UK driving licence with 6 penalty points or fewer
Desirable
- BS7671:2018 (18th Edition Wiring Regulations)
- City & Guilds 2391/2394 Testing and Inspection
- Experience within EV charging, renewables, or power electronics
- EV charger certification or manufacturer training
- Practical experience commissioning/maintaining Rapid DC, Ultra and HPC chargers
- Ability to read and interpret schematics and technical manuals
- Understanding of analogue and digital electronics/components
- Strong awareness of electrical hazards and on-site H&S requirements
Key responsibilities
- Coordinate with Service Coordination and Operations teams to ensure accurate job data capture and timely service reporting
- Commission, configure and hand over AC and Rapid DC chargers on customer sites
- Complete set-up, testing and verification to confirm safe operation and standards compliance
- Work alongside project management and installation teams to integrate charging systems with customer infrastructure
- Keep company tools, assets and test equipment in good condition, reporting defects immediately
- Carry out routine and preventative maintenance to maximise uptime and performance
- Diagnose and resolve faults across electrical, mechanical and software-related issues
- Perform diagnostics, firmware updates and calibration as required
- Replace defective parts (and occasionally complete charger units), ensuring repairs follow manufacturer guidance
- Provide on-site technical support and user guidance/training to customers
- Respond promptly to service requests and maintain clear, professional client communication
- Log all service activity, repairs, maintenance actions and customer interactions within the service management system
- Follow all safety procedures, company policies and site rules while working in the field
- Ensure compliance with applicable electrical codes and standards during commissioning and maintenance
- Participate in required safety training and certifications
Benefits
- Structured career progression framework
- Company van and fuel card
- Overtime opportunities
- 30 days annual leave (inclusive of company shutdown days)
- Travel subsistence provided
- Discretionary company performance bonus
- BUPA healthcare (after 6 months)
- Salary sacrifice pension scheme (8% total)
- Salary sacrifice EV car scheme and charger installation
- Salary sacrifice holiday purchase scheme (up to 5 days)
- Enhanced family-friendly policies
- Benefits platform with a wide range of discounts and services
- Long service awards
....Read more...
Electrical Field Service Engineer - EV
Location: Southeast England
Sector: EV Infrastructure
Salary: £39-50,000 Plus Company Vehicle and Fuel Card
Job description
An organisation is seeking an Electrical Field Service Engineer to commission, maintain, fault-find and repair EV charging equipment across the UK, including AC chargers, Rapid DC, Ultra, and High-Power Charging (HPC) units.
This role suits a hands-on engineer with a strong electrical background who can work autonomously on customer sites, delivering reliable, high-quality technical support. The Field Service Engineer will help ensure charging assets remain safe, compliant, and performing at their best, meeting both company and client expectations.
The work will take place in a range of environments, including outdoor locations and occasional confined spaces. Travel is required, with some overnight stays.
Essential
- NVQ Level 3 Electrical qualification
- Minimum 2 years experience in a field-based engineering role (commissioning, maintenance, or repair of electrical systems/equipment)
- Proven ability to work independently on client sites, diagnosing and resolving issues without direct supervision
- Experience working in SLA-driven environments
- Competent with basic test and measurement tools (e.g., multimeters, voltage testers)
- Strong fault-finding and problem-solving skills, including complex technical diagnostics
- Confident communicator with good customer-facing skills
- Effective time management, particularly when travelling between sites
- Full UK driving licence with 6 penalty points or fewer
Desirable
- BS7671:2018 (18th Edition Wiring Regulations)
- City & Guilds 2391/2394 Testing and Inspection
- Experience within EV charging, renewables, or power electronics
- EV charger certification or manufacturer training
- Practical experience commissioning/maintaining Rapid DC, Ultra and HPC chargers
- Ability to read and interpret schematics and technical manuals
- Understanding of analogue and digital electronics/components
- Strong awareness of electrical hazards and on-site H&S requirements
Key responsibilities
- Coordinate with Service Coordination and Operations teams to ensure accurate job data capture and timely service reporting
- Commission, configure and hand over AC and Rapid DC chargers on customer sites
- Complete set-up, testing and verification to confirm safe operation and standards compliance
- Work alongside project management and installation teams to integrate charging systems with customer infrastructure
- Keep company tools, assets and test equipment in good condition, reporting defects immediately
- Carry out routine and preventative maintenance to maximise uptime and performance
- Diagnose and resolve faults across electrical, mechanical and software-related issues
- Perform diagnostics, firmware updates and calibration as required
- Replace defective parts (and occasionally complete charger units), ensuring repairs follow manufacturer guidance
- Provide on-site technical support and user guidance/training to customers
- Respond promptly to service requests and maintain clear, professional client communication
- Log all service activity, repairs, maintenance actions and customer interactions within the service management system
- Follow all safety procedures, company policies and site rules while working in the field
- Ensure compliance with applicable electrical codes and standards during commissioning and maintenance
- Participate in required safety training and certifications
Benefits
- Structured career progression framework
- Company van and fuel card
- Overtime opportunities
- 30 days annual leave (inclusive of company shutdown days)
- Travel subsistence provided
- Discretionary company performance bonus
- BUPA healthcare (after 6 months)
- Salary sacrifice pension scheme (8% total)
- Salary sacrifice EV car scheme and charger installation
- Salary sacrifice holiday purchase scheme (up to 5 days)
- Enhanced family-friendly policies
- Benefits platform with a wide range of discounts and services
- Long service awards
....Read more...
An exciting opportunity has arisen for an Engineering Manager to join a well-established company specialising in precision instrument design and advanced temperature measurement technologies.
As the Engineering Manager, you will oversee the test and calibration laboratory, while also providing leadership across the business. This is a full-time, permanent position offering a competitive salary between £35,000 - £47,000, along with a comprehensive benefits package.
Key Responsibilities:? Manage and develop the test and calibration laboratory function to ensure optimal performance and compliance with industry standards.
? Provide operational leadership to a small, specialized team, ensuring high levels of performance and efficiency.
? Oversee HR matters and health and safety compliance, with external support where necessary.
? Collaborate closely with senior leadership on budgeting and financial oversight to ensure the companys financial health and effective resource allocation.
? Contribute to business planning and assist in setting the strategic direction of the company.
? Ensure that all engineering and calibration activities adhere to the highest technical standards.
? Maintain effective relationships with external partners and suppliers, ensuring smooth operations and successful collaborations.
What Were Looking For:? Experience in similar roles such as Engineering Supervisor, Technical Manager, Calibration Manager, Laboratory Manager, Engineering Team Leader, Senior Calibration Engineer, Senior Calibration Technician, General Manager, Operations Manager, Metrology Engineer, Project Engineer, Service Manager, Workshop Manager, Test Manager, or equivalent.
? A strong technical background in electronics, calibration, metrology, or a related engineering discipline.
? Excellent numerical and analytical capabilities.
? Experience in working within a small organization, with an understanding of its day-to-da....Read more...
Join a global engineering team driving the green energy transition. We are seeking a Lead Verification and Validation Engineer to take ownership of HVDC Control and Protection testing and validation activities, ensuring delivery on time and to the highest technical standards.
Key Responsibilities
Lead planning and coordination of Verification and Validation activities.
Develop and execute Factory System Test (FST) cases and support Factory Acceptance Tests (FAT).
Create HVDC system and plant models using PSCAD, RSCAD, or EMTP-RV.
Prepare control system requirements for RTDS lab setups.
Support commissioning teams and contribute to process and tool improvements.
Requirements
Degree in Electrical, Power Systems , Power Electronics Engineering (or equivalent).
Proven experience in HVDC Control and Protection design and verification.
Strong technical skills in PSCAD, RSCAD modelling and system behaviour analysis.
Leadership experience in managing validation teams.
....Read more...
Join a global engineering team driving the green energy transition. We are seeking a Lead Verification and Validation Engineer to take ownership of HVDC Control and Protection testing and validation activities, ensuring delivery on time and to the highest technical standards.
Key Responsibilities
Lead planning and coordination of Verification and Validation activities.
Develop and execute Factory System Test (FST) cases and support Factory Acceptance Tests (FAT).
Create HVDC system and plant models using PSCAD, RSCAD, or EMTP-RV.
Prepare control system requirements for RTDS lab setups.
Support commissioning teams and contribute to process and tool improvements.
Requirements
Degree in Electrical, Power Systems , Power Electronics Engineering (or equivalent).
Proven experience in HVDC Control and Protection design and verification.
Strong technical skills in PSCAD, RSCAD modelling and system behaviour analysis.
Leadership experience in managing validation teams.
....Read more...
Electronics Engineer – Programme Manager - Medical Devices – Cambridge
Due to a growth in company output, there is a need for a new Programme Manager who has an Electronics Engineering pedigree. Based in Cambridge, you will be leading several projects. Some projects will involve you offering support and mentorship to junior members of staff, while other projects will involve you taking on the Electronics design aspects yourself.
We are looking for someone who has been working hands on developing new Medical Devices technologies in their current role, while mentoring other members of staff. Most projects will be on electro-mechanical Medical Devices, so you will need to have worked on these types of technologies. They could be implantable medical devices, wearable tech or another medical technology that abide by EN60601 standards.
Alongside past work experience, it is expected that you hold a relevant degree within a suitable subject that led you into a Medical Devices Electronics Engineering role. It would also be advantageous if you hold a master’s or PhD, but not essential as the active work experience in industry is more important.
The types of technologies you will be developing are lifesaving and life improving medical devices, truly industry disrupting technologies that will save and improve thousands of people’s lives.
This role will involve working with external and internal entities, involving a lot of communications both virtual and in real life, due to this it would be advantageous if you have worked in a role that involved communicating updates and project changes continuously.
I mentioned knowing about EN60601, but it would also be essential to have a strong understanding of ISO 13485.
People who have been successful in this role previously tend to have a highly technical hobby, this could be building drones, tinkering with engines, computer programming or another hobby that involves problem solving. If you do have such a hobby, make sure you highlight it on your CV to give you the best chance of gaining an interview.
Apart from working on industry changing technologies, you will be offered a proven career development plan, continuous training to keep you at the forefront of the medical devices sector, excellent salary, bonus, enhanced pension, medical insurance, free meals and other excellent benefits you’d expect from a multinational blue-chip organisation.
I expect a lot of interest in this role, so apply now or ensure consideration.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.....Read more...
Are you a Power Supply Design Engineer with experience in PSU design, covering topologies, magnetic design, and fault-finding and diagnostic skills?
Are you keen to work for a global power electronics business? If so, our client has the perfect opportunity for you.
Our client is looking to hire a Power Supply Design Engineer to join their Power + Solutions team in Devon.
The Role
In this Power Supply Design Engineer position, based in Ilfracombe, you will be responsible for:
Designing and developing power supply solutions using appropriate technologies to meet customer specifications.
Creating and writing technical specifications, occasionally in conjunction with customers, where none exist or where existing specifications are insufficient.
Mentoring and providing technical support to junior members of the team.
Reviewing and approving engineering reports produced by junior team members, recognising that reports issued to customers reflect the professionalism of both the individual and the organisation.
About You
To apply for this Power Supply Design Engineer role based in Ilfracombe, you will need:
Provable experience in PSU design, covering a variety of topologies including buck, boost, half-bridge, full-bridge, LLC and PFC circuits.
Magnetics design knowledge, including transformers and chokes.
A strong understanding of the principles of PSU design.
Knowledge of available components, their performance characteristics, and relevant suppliers.
Additional Information
This is an on-site position, with potential relocation assistance available.
Our client welcomes applications from suitable candidates, and potential sponsorship may be offered.
With a competitive salary of up to£45,000 plus bonus, this could be the next step in your career.
To apply for this Power Supply Design Engineer role based in Ilfracombe, please submit your application today.....Read more...
Embedded Software Engineer – Security Clearance – Cambridge
A growing spinout security technology company, based in Cambridge, is currently seeking an experienced Embedded Software Engineer to assist with the development, modification, and enhancement of various security technologies.
Your focus will span across radio, satellite, communications, radar, sensors, and other complex technologies used in the defence, aerospace, telecommunications, and other cutting-edge sectors, where you will contribute to the development of new technologies.
You will collaborate with a team of experts, including electronics design engineers, software engineers, mechanical engineers, physicists, and other specialists. You won't necessarily need prior experience in the specific sector, as this is trainable, but you should have substantial experience in developing embedded systems using C/C++ programming languages.
This company provides bespoke products and services for clients, ensuring that your projects will always be unique, presenting their own set of problems and challenges to keep you engaged. In addition to client projects, you will be involved in developing new versions of existing technology and improving current versions, offering a diverse and engaging role that will keep you interested for the long term.
While experience in telecommunications, aerospace, scientific, radar, radio, or other complex technologies that involve communication between devices would be ideal, it is not essential. Your experience as an Embedded Software Engineer is more crucial than the specific sector.
Certain roles may require security clearance, typically necessitating a British passport with no criminal record or a history of residing in the UK and paying taxes for several years (also with no criminal record).
This role has arisen due to the company's growth. They take pride in investing in their staff by providing continuous training to support your career development. They have received awards for their commitment to staff development.
In addition to award-winning training, career growth, and varied and unique work, you will receive a competitive starting salary, bonuses, pension contributions, medical insurance, life assurance, free parking, and other excellent benefits.
There are currently several openings for Embedded Software Engineers within the company, so they will consider candidates with different levels of experience, from those early in their careers to senior candidates with years of experience.
Salary will be determined based on experience, and there may be new roles approved in the future. If you are interested, we recommend submitting your application now to avoid missing out.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Embedded Hardware Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: FPGA/VHDL, Java or C/C++Nice to have's: Python, Siemens PLC, Maven/Ant, SQL Server, Linux, Docker, GIT, Jenkins, Sonatype Nexus
Our Client:Is a pioneering, family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek a highly skilled Embedded Hardware Developer with a background in Electronic Engineering and experience in FPGA/VHDL to join our client's team. As an Embedded Hardware Developer, you will design, develop, and maintain simulated signal-processing systems, combining C++, Java or Python with FPGA/VHDL.
Your Tasks:
Development and simulation of complex signal processing systems
Design and verification of simulated signal processing system with hardware (mainly FPGA/ VHDL)
Design and development of PCB for control systems
Maintenance and further development of the internal firmware environment and hardware
Commissioning and tests of control systems
Required Skills:
Master’s or Bachelor’s degree in electrical science or similar education
Experience in signal processing, FPGA designs and VHDL programming
Experience in PCB development for control systems
Knowledge of component-oriented design with JAVA OSGI/RCP, with SPS programming (Siemens) and with Python as a plus
Alternatively, strong C++ skills are welcome
Good language skills in English and German (both spoken and written)
Positive work attitude. Collaborative team player with excellent communication skills to support team members
Ability to work in interdisciplinary teams
Benefits:
CHF 100 -130k + Bonus Benefits
Opportunity to work on exciting projects
Collaborative and dynamic international team environment
Remote work options with flexible working hours
Professional development opportunities and mentorship
Comprehensive benefits package, including health insurance, retirement plan, and more
Access to cutting-edge technologies and tools
Recognition and rewards for outstanding performance
30 Days Annual Leave
Location: Aargau, Baden, Switzerland (Remote)Salary: CHF 100 -130k + Bonus Benefits
Mandatory Skillset: FPGA/VHDL, Java or C/C++Nice to have's: Python, Siemens PLC, Maven/Ant, SQL Server, Linux, Docker, GIT, Jenkins, Sonatype Nexus
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/ARG100130....Read more...
Senior Mechanical Engineer – Biotech Mechatronics – Cambridge
A spin-out Biotech company, based in Cambridge, is currently hiring several Senior Mechanical Engineers to join them and help accelerate the proof of concept, design, development, building, and testing of a novel life-saving biotech manufacturing device.
Your focus will be accelerating the proof of concept, design, development, building, and testing of the hardware of this new biotech device, collaborating with some excellent Medical Devices Physicists, Scientists, Electronics Engineers, and Design Engineers.
This role involves working on the design and development of this biotech manufacturing device, using 3D CAD. Therefore, specific CAD experience will be essential, ideally SOLIDWORKS.
We need senior-level candidates, someone who has worked on mechatronics, automation, robotics, precision devices or another complex electro-mechanical technology.
Due to the size of this company, you will be exposure to other areas of the business, including third-party meetings and attending Biotech, Medical Devices and Science conferences and trade shows. Consequently, it would be ideal if you have previously worked for a start-up/scale-up company or worked for a Medical Devices/Biotech/Scientific Design Consultancy and know what it’s like to wear multiple hats when needed. Experience in Medical Devices, Scientific or Biotech companies is not essential; we can also look at candidates from other complex sectors.
The technology you will be working on will save lives. I can provide more details once you have made an application. Most candidates I have spoken with find the work rewarding due to the impact this work will have on lives.
It is expected that you would hold a degree and a masters in a related Medical Devices, Mechanical Engineering, Design Engineering, Electronics Engineering, or another relevant scientific subject that led you into a Mechanical Engineer role.
You will also be rewarded with an excellent starting salary, enhanced pension, bonus, healthcare, other benefits, and future career development as the company grows while also working in an interesting field on a product that could help a lot of people.
As this is an exciting role, joining a start-up company at the beginning of their journey, I’m expecting a lot of interest in the role. So, if you are interested, please apply straight away or risk missing out to someone else.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you.....Read more...
Are you a Quality Engineer who thrives on solving problems and driving improvements? Do you want to see the impact of your work in real products used worldwide? Join us and take ownership of quality systems in a supportive, family-owned engineering business where your expertise truly matters.Please note - This is a part-time position with 60% hours available.Deeter Electronics Ltd is a leading international company specialising in the design, development, and production of electronic sensors, switches, and control and instrumentation systems. Established in 1982, we have built a strong reputation for supplying quality products and services. We offer a wide range of float switches and level sensors suitable for various applications across diverse industries. For more information, please visit our website.Role DescriptionWe have an opportunity for an experienced Quality Engineer to join our team.We are looking for someone with experience in quality engineering, ideally with mechanical and/or electronics engineering experience. Any experience or knowledge of ATEX hazardous area certification or another regulated engineering environment would be extremely beneficial.The successful applicant will be responsible for maintaining and developing the company's ISO 9001:2015 QMS and maintaining our product and manufacturing approvals, ensuring that all products meet the business and customer quality expectations and regulatory requirements.Tasks
Developing and maintaining the ISO 9001:2015 QMSEnsuring products meet internal and external quality requirementsWorking with suppliers to identify, isolate and resolve issues with defective componentsLiaise with the sales team to resolve quality control issuesMaintaining quality documentation following technical changes to products and processesMonitoring and developing the quality inspection processes and auditing these processesConducting internal audits and writing reportsEnsure calibration certificates are kept up to date
Requirements
Technical qualification such as HNC/HND or above in an Engineering or Science disciplineExperience in a similar roleExperience working within an ISO 9001 Quality Management System with knowledge of audits, documentation and process improvement"
Extra Benefits
Extra days holiday for BirthdaysStaff Training/DevelopmentRefreshments providedBreak AreaFree Parking
How to Apply:If you are interested in this opportunity and would like to learn more we would love to hear from you! Please attach your CV to the link provided and we will be in contact.....Read more...
An exciting opportunity has arisen for a System Engineer to join a cutting-edge team developing advanced Cyber and Information Assurance (IA) products. This role offers the chance to work across multiple development projects, applying innovative engineering solutions to complex, real-world problems.
What Youll Do
- Take technical ownership of system engineering activities across one or more IA product developments.
- Collaborate closely with hardware, software, FPGA and mechanical teams to define and deliver coherent technical solutions.
- Engage in requirements engineering, capturing, analysing and refining requirements across all design disciplines.
- Contribute throughout the full product lifecycle, from initial concept and architecture through to development, verification, and customer delivery.
- Support bid proposals and provide technical input to customer discussions to ensure solutions meet end-user needs.
What Were Looking For
- Degree in a relevant engineering discipline and 5+ years industry experience in systems engineering or a related field.
- Strong understanding of the systems engineering lifecycle, including requirements management, architecture, and product validation/verification.
- Broad technical awareness across multiple engineering disciplines, with expertise in at least one area.
- Ability to produce clear, concise technical documentation and communicate effectively with cross-functional teams.
- Experience using DOORS or similar tools for requirements management is an advantage.
- Must hold sole British nationality and be eligible for UK Security Clearance (SC).
Desirable Skills
- Knowledge of system design languages (UML, SysML) and techniques such as use-case analysis or trade studies.
- Experience preparing technical estimates for bids.
- Familiarity with mechanical and environmental qualification processes.
This is a fantastic opportunity for an experienced System Engineer, or an electronics/software engineer looking to broaden their scope, to play a key role in the design of unique, high-assurance products used in critical national security applications. Youll work with an innovative team tackling challenging technical problems and shaping solutions from concept to delivery.
TT....Read more...
An exciting opportunity for an experienced Senior RF Design Engineer to join a leading technology and engineering company specialising in advanced communication and defence systems. You will play a key role in designing and developing high-performance RF systems used across defence, aerospace, and critical infrastructure sectors.
Key Responsibilities
Design and develop RF systems, including transmitters, receivers, filters, and amplifiers.
Work on schematic capture, PCB layout, and RF simulation (Altium and similar tools).
Support product testing, troubleshooting, and design verification.
Collaborate with multi-disciplinary engineering teams throughout the product lifecycle.
Mentor junior engineers and contribute to continuous process improvement.
Key Skills
Proven experience in RF design and development (amplifiers, filters, or transceivers).
Strong knowledge of RF simulation tools and PCB design software.
Practical experience testing and troubleshooting prototypes.
Degree in Electronics, Electrical Engineering, or equivalent.
Eligible for UK Security Clearance (British Citizenship required).
Why Join
Competitive salary and bonus structure.
Hybrid working and career development opportunities.
Work on cutting-edge technology that supports national security and innovation.....Read more...
