A leading global technology lifecycle and services partner is seeking a skilled Electronics Test & Repair Engineer to join their growing Repair Operations team at their site in Solihull. This is a hands-on role testing, diagnosing, and repairing complex electronics equipment while supporting new projects and continuous improvement initiatives.
Key Duties of the Electronics Test & Repair Engineer based in Solihull:
Test, diagnose, and repair a variety of electronics equipment
Assist in introducing new projects and products into the workshop
Document test procedures and act as a Subject Matter Expert
Support and train other engineers in new processes and equipment
Maintain records of parts and equipment, including fault tracking, screening, and warranty
Perform software/hardware upgrades and assembly/disassembly of parts as required
Qualifications / Skills Required for this Electronics Test & Repair Engineer based in Solihull
Strong experience in electronics component-level testing and repair
Strong understanding of electronic components and reverse engineering of boards
Excellent communication skills and workshop safety knowledge
Ability to work independently and meet customer deadlines
Rewards & Benefits for this Electronics Test & Repair Engineer: based in Solihull:
Up to £35,000 basic salary, with consistent overtime on offer (x1.5 salary Saturday, x2 salary Sunday)
Monthly attendance & performance bonus ~£100
Flexible hours, site open from 6.30am – 6pm
25 days holiday plus bank holidays
On-site free parking
Progression pathways to Senior Engineer and Subject Matter Expert
To apply for the Electronics Test & Repair Engineer position in Birmingham, please submit your CV
....Read more...
A Senior Electronics Engineer is urgently required for a job in North London.
A fantastic new job has arisen for a Senior Electronics Engineer, based in North London to work for an advanced technology organisation specialising in the design and manufacture of semiconductor wafer scale imaging devices for the medical sector.
The Senior Electronics Engineer, North London, will be play a lead role in driving new products through development to market. This will cover the full product lifecycle from NPI to post development support of legacy products.
The Senior Electronics Engineer will be responsible for:
Design and Verification of PCB’s and systems for x-ray detector systems
Development of PCB test procedures
The ideal Senior Electronics Engineer based in North London will have previous experience across:
Analogue and Mixed-Signal design with low noise techniques
High speed digital interfaces
Board level design through PCB Layout using Altium (or similar)
APPLY NOW! For the Senior Electronics Engineer based in North London by sending a cover letter and CV to TDrew@redlinegroup.Com or by calling Tom Drew on 01582 878 848 quoting ref. THD1404. Otherwise, we always welcome the opportunity to discuss other roles similar to Engineering jobs on 01582 878 848.
....Read more...
Exciting Electronics Engineer role!
Redline has been retained by a leading process instrumentation manufacturer who are looking for an Electronics Engineer to join their R&D team based in Surrey.
Due to significant growth, they are seeking an Electronics Engineer to be responsible for the test, design and development of analogue and digital circuit design across new and existing products, going into a variety of regulated industries. You will be involved with PCB design, prototyping, test and validation and software interface.
The nature of the industry and products will require someone who is a British Citizen.
Key skills and experience for Electronics Engineer based in Surrey:
Proven experience within an electronics environment
Ideally within a regulated industry i.e. Defence, Aerospace, Medical, Automotive etc.
Degree qualified in a related Electronics discipline
Circuit and PCB design
Electronic test
Excellent verbal and written communication skills
This is an exciting opportunity to join a growing company who can offer the opportunity for career progression and personal development.....Read more...
Senior / Lead Power Electronics Engineer - Power Supplies
Are you an experienced Senior / Lead Power Electronics Engineer with a strong background in designing advanced power supply solutions?
Would you like to join an ambitious and growing Engineering business putting their staff’s progression at the top of priorities? If so, this could be the role for you!
Our client provides rugged power system designs and products for harsh environments, predominantly within aerospace and defence.
The successful applicant for this Senior / Lead Power Electronics Engineer job based in Hertfordshire will be responsible for:
Power Electronics Design & Development: Lead the design and development of digital and analogue power supply modules.
System Requirements: Develop, capture, and review system-level power requirements.
Magnetics Design: Design power supply magnetics, including planar magnetics.
Power Conversion Expertise: Work across low and high power levels and frequency ranges, including isolated and non-isolated DC/DC and AC/DC conversion (topologies, components, control, and packaging).
To apply for this Hertfordshire-based Senior / Lead Power Electronics Engineer role you must have a combination of the following skills and experience:
Proven experience as a Senior or Lead Power Electronics Engineer
Strong background in power supply design (AC/DC, DC/DC converters)
Experience with magnetics and planar magnetics design
Ability to define and review system-level power requirements
YOU MUST BE ABLE TO WORK IN UK WITHOUT SPONSORSHIP
To apply for this Senior / Lead Power Electronics Engineer – Power Supplies job based in Hertfordshire, please send your CV to NDrain@redlinegroup.Com Or call 01582 878828 to speak to Nick.....Read more...
A job as a Senior Electronics Engineer is urgently required for a in Cambridge, Cambridgeshire.
An exciting new job has arisen for a Senior Electronics Engineer, based in Cambridge, Cambridgeshire to work for a world leader in the design and manufacture of custom RF, microwave and millimetre wave components and subsystems.
The Senior Electronics Engineer, located in Cambridge, Cambridgeshire will be responsible for the design and development of RF/mmW sub-circuits, sub-modules and systems within telecommunications and defence products. You will play a pivotal role in the analogue and digital circuit design, schematic capture and PCB layout, ensuring that electrical performance, quality, cost and manufacturability requirements are met.
The ideal Senior Electronics Engineer, based in Cambridge, Cambridgeshire will have previous experience across;
Experience in circuit schematic, multi-layer, mixed-technology layout using Altium Design package.
Component level electronic circuit design, layout, and development.
Digital circuits utilising glue logic, ADCs, DACs & microprocessors.
APPLY NOW! For the Senior Electronics Engineer job, located Cambridge, Cambridgeshire by sending a cover letter and CV to TDrew@redlinegroup.Com or by calling Tom Drew on 01582 878848 quoting ref. THD1397. Otherwise, we always welcome the opportunity to discuss other roles similar to Electronic Engineering jobs on 01582 878 848.....Read more...
Are you an experienced Electronics Design Engineer seeking a new opportunity to join a well established company based in Chelmsford Essex?
My Chelmsford based client are a global leader in specialised components and subsystems for innovative solutions in medical, science, aerospace and industrial applications. The products they produce are everywhere, hospitals, planes, ships and even outer space.
This role will enable you to develop and gain experience in the ideas that are behind some of the most advanced technologies in the world. You will also get a chance to work alongside highly experienced engineers, technicians and scientists.
This is a crucial role within my Chelmsford based company ; the role is to be part of a High voltage electronics team to support product development, from design, realisation, design proving and implementation.
Responsibilities for the Electronics Design Engineer:
Development and design specifications for product/systems
Follow design processes from concept through to production.
Work under a Technical Authority and Product Authority who will guide the development
Experience & Skills for the Electronics Design Engineer:
Industry experience with design of HV power electronics for volume products, from top level design through to detailed design and verification.
Experience of test and commissioning high voltage systems and use of electrical, electronic and microwave test and measurement equipment.
Knowledge of PCB design techniques.
Knowledge of industrial compliance requirements including legislative, EMC/EMI & environmental testing.
Experience of complete product life cycle design.
This is a great chance for an experienced Electronics Design Engineer to join a growing company who can offer the opportunity for career progression and personal development.
To apply for the Electronics Design Engineer role, please send your CV Rwilcocks@redlinegroup.Com, or for more information contact Ricky on 01582 878810....Read more...
Are You an Electronics Test Support Engineer with Experience in ATE Systems?
This is a great chance to join a global technology manufacturer at the forefront of advanced electronics, software and high-tech industrial solutions. With a long-standing reputation for innovation and engineering excellence, the company, based in Eastbourne, develops sophisticated products used in cutting-edge industries including semiconductor manufacturing, scientific research, renewable energy and advanced industrial applications.
The Role
As an Electronics Test Support Engineer based in Eastbourne, you will provide hands-on support for Automated Test Equipment (ATE), helping to ensure production runs efficiently and test systems operate at optimum performance. You'll be responsible for troubleshooting test-related issues, maintaining equipment, repairing test fixtures and supporting continuous improvement activities across the production facility. This is an excellent opportunity for a practical engineer who enjoys fault finding, problem solving and working across the interface of electronics, software and instrumentation.
Key Responsibilities for this Electronics Test Support Engineer based in Eastbourne;
Provide first-line support for automated and semi-automated test systems.
Diagnose and resolve hardware, software and instrumentation issues.
Carry out preventative maintenance and repair of test equipment and fixtures.
Respond to production test support requests and minimise downtime.
Support engineering projects, including upgrades and redesigns of legacy test stations.
Assist with validation, commissioning and duplication of test systems.
Work closely with engineering, manufacturing and production teams to deliver robust test solutions.
For this Electronics Test Support Engineer based in Eastbourne you need;
Experience supporting ATE, production test equipment or electronic test systems within a manufacturing environment.
Strong understanding of electronics and practical fault-finding techniques.
Ability to interpret electronic schematics and system diagrams.
Experience with test automation environments such as C#, LabVIEW, Python or similar.
Hands-on experience with electronic test fixtures, instrumentation and measurement equipment.
Degree, HNC or HND in Electronic Engineering, Electrical Engineering, Test Engineering or a related discipline.
Proven background in test engineering, production test support or electronics manufacturing.
Interested? Please send your CV to Kyle Graveney at KGraveney@redlinegroup.Com or call on 01582878817.....Read more...
Redline has been retained by a leading instrumentation manufacturer who are looking for a Electronics Design Engineer to join their R&D team based in Surrey.
Due to significant growth, they are seeking an Electronics Design Engineer to be responsible for the design and development of analogue and digital circuit design across new and existing products, going into a variety of regulated industries. You will be involved with PCB design, prototyping, test and validation and software interface.
The nature of the industry and products will require someone who is a British Citizen.
Key skills and experience for Electronics Design Engineer, based in Surrey:
Proven experience within a hands on electronics design role
Mixed signal design within a regulated industry i.e. Defence, Aerospace, Medical, Automotive etc.
Experience in sensor design
Degree qualified in a related Electronics discipline
Firmware / embedded knowledge
Excellent verbal and written communication skills
This is an exciting opportunity to join a growing company who can offer the opportunity for career progression and personal development. ....Read more...
An exciting opportunity has arisen for a Cheshire based Senior Electronics Test Engineer to join this leading provider of electronic design and assembly services.
Based at their site in Cheshire they are seeking a Senior Electronics Test Engineer to be responsible for the development of new test procedures and the associated equipment. You will be involved with the test and fault diagnosis of electronic systems across a wide range of products.
This Cheshire based company operate a 4x day working week, Monday to Thursday 7am to 5pm.
Key skills required for the Senior Electronics Test Engineer:
Significant hands on experience within an Electronics test environment
Experience of using a variety of test equipment
Test to component level, assembly, SMT experience
Labview experience would be desirable
Excellent communication skills both verbal and written
This is a great opportunity for someone to be the lead engineer within the team.
APPLY NOW! Please send your CV to Adighton@redlinegroup.Com, or for more information contact Adam on 01582 878848.....Read more...
Principal Power Electronics Engineer
My client has recently made a new opportunity available for a Principal Power Electronics Engineer to join their multi-skilled R&D team based in Tyne & Wear, North East England.
This company develops high-performance permanent magnet electric motors and generators used across a variety of sectors, including Rail, Energy and Power.
My client is a technology business with diverse interests across the rail, defence and energy industries, where it is recognised for developing innovative, leading-edge technologies. They have a truly global footprint, with facilities in nearly every developed economy and a portfolio of high-value, high-profile technology projects.
The successful candidate for the Tyne & Wear based Principal Power Electronics Engineer role will:
Be degree educated in Electronic Engineering or a related discipline.
Have significant experience in the design and development of analogue power electronics.
Have proven experience designing SMPS, AC/DC and DC/DC power conversion systems.
Have experience working within the Rail, Energy, Transport or other highly regulated industrial sectors.
Be capable of providing technical leadership, mentoring engineers and driving complex power electronics projects from concept through to production.
As well as offering excellent career progression opportunities, my client provides a highly competitive package, including up to in relocation support, which can be used towards a wide range of moving expenses, including household appliances and furnishings.
For further information regarding this Principal Power Electronics Engineer opportunity based in Tyne & Wear, North East England, please email an up-to-date CV to ndrain@redlinegroup.Com....Read more...
We are partnered with a well-established engineering business in Gatwick, West Sussex designing and manufacturing high reliability power electronics predominantly sold into aerospace and defence. As their engineering team continues to grow, they are looking to bring in a Power Supply Design Engineer to take ownership of new product development.
In this Power Supply Design Engineer role, you will:
Design and develop switch mode power supplies across a wide power range
Own power supply designs from concept through to manufacture
Work on technically demanding products used in regulated, high reliability sectors
Collaborate closely with wider electronics and systems teams to deliver robust designs
The ideal Power Supply Design Engineer will have:
Experience designing switch mode power supplies in real world products
A solid understanding of modern AC/DC and DC/DC power conversion techniques
Exposure to EMC, filtering, and mixed signal electronics
An electronics degree or equivalent hands-on industry experience
This is a strong opportunity to join a financially stable, growing electronics business that forms part of a wider global group, offering long term progression and interesting technical work.
To apply for this Power Supply Design Engineer role in Gatwick, send your CV to ndrain@redlinegroup.Com or contact Nick on 01582 878828
....Read more...
C# WPF Software Engineer - Electronics
Are you a Software Engineer with provable commercial experience working on software connecting to devices?
If so, my client has an exciting opportunity for you!
You will play a key role in designing, developing and implementing software for cutting-edge optical machinery used within advanced manufacturing environments.
In this role as a C# WPF Software Engineer - Electronics based in Oxfordshire, you will be responsible for the following:
Developing and maintaining software applications using C# and WPF for specialist industrial machinery.
Designing, implementing and testing software that interfaces directly with hardware and machine control systems.
Working closely with multidisciplinary engineering teams including Electronics, Mechanical and R&D
Engineers to deliver innovative solutions.
Supporting the development of new products and continuous improvement of existing software platforms.
Contributing throughout the full software development lifecycle from design through to deployment.
The successful applicant for this C# WPF Software Engineer - Electronics role based in Oxfordshire will:
Have provable commercial experience developing software using C# and WPF.
Have experience developing software that interfaces directly with hardware or industrial machinery.
Hold a degree in Software Engineering, Computer Science, Electronics or a related engineering discipline.
Have a strong understanding of object-oriented programming principles.
Any experience with MVVM, machine vision, OpenCV, image processing or industrial automation would be advantageous.
This is an exciting opportunity to join a growing organisation that designs and manufactures highly specialised optical machinery, offering excellent long-term career development and the opportunity to work on genuinely innovative technology.
To apply for the role of Software Design Engineer based in Oxfordshire, please send your CV to NDrain@redlinegroup.Com, or for more information contact Nick Drain on 01582 878828.....Read more...
Power Electronics Engineer - Renewable Energy
My client has recently made a new job available where they are looking for a Principal Power Electronics Engineer - Renewable Energy to join their multi-skilled R&D team based in Tyne & Wear, North East England.
This company develops high performance permanent magnet electric motors and generators used in a variety of different application areas that include Rail, Energy and Power Sectors.
My client is a technology business with diverse interests in a range of industries including the rail, defence and energy sectors where it is viewed as a developer of innovative and leading edge technologies. They have a truly global footprint with facilities in nearly every developed economy and ongoing high value, high profile technology projects.
The successful candidate for thePower Electronics Engineer - Renewable Energy job– will;
Be degree educated in electronic engineering or equivalent discipline.
Have had experience in the design and development of analogue electronics.
Ideally Have experience of SMPS, AC/DC, DC/DC.
Experience within Rail, Energy or Transport sectors
As well as being able to offer fantastic career opportunities, my client also offers a very competitive package with up to £8,000 relocating funds that you can use on everything including white goods, TV's etc.
For further information regarding the job of Power Electronics Engineer - Renewable Energy based in Tyne & Wear, North East England please email an up to date CV to ndrain@redlinegroup.Com or call Nick Drain on 01582 878828.....Read more...
Electronics Engineer Consultant – Security Clearance – Cambridge
A new design consultancy, based in Cambridge, are currently looking for a Electronics Engineer Consultant to add to the team of experienced experts, specifically with a focus on security cleared projects.
Although this is a new design consultancy, they have the backing of larger companies meaning you still have the job security of working for a large company. You will also have benefits including pension, share purchase schemes, healthcare, life assurance and other excellent benefits not normally available to smaller organisations.
We are looking for an Electronics Engineer who has ideally worked on MOD, Security Clearance or other sensitive technologies. Due to the nature of consultancy services, your electronics experience could be across a number of fields such as RF Engineering, Microwave Electronics, Analogue Electronics, Sensors Technologies, PCB Electronics or other complex electronics design.
It will also be ideal if you have specific Firmware, Embedded or other software experience.
Due to the nature of work, you must already hold or be able to obtain security clearance.
Apart from the benefits, you will be rewarded with an excellent salary, career opportunities and a continued skills training to keep you at the forefront of technologies.
This is a rare opportunity to be involved with a design consultancy at the ground level, meaning future career development will be more likely than with other consultancies or companies. Due to this, I’m expecting a lot of interest in this role. If you are interested in the role, apply now or risk missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Scientific recruitment specialists Newton Colmore Consulting, on +44 121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications. Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors.
....Read more...
Electronics Engineer – Cancer Instrumentation – Cambridge
A growing Medical Devices Division is currently seeking an Electronics Engineer to contribute to the development of new Cancer Instrumentation devices, based in South Cambridge.
You will work on a wide range of electronics design tasks, including, but not limited to, power electronics, digital/analogue electronics, RF, and other complex fields such as thermal, motion control, and electro-mechanical or electro-medical devices. While it is not expected that you have experience in all these areas, having expertise in as many as possible would be advantageous.
Specifically, you will need experience working within the Medical Devices sector adhering to ISO 13485 or EN 60601 standards. You will focus on Cancer Instrumentation devices designed to improve the survival rates of cancer patients. However, experience in other Medical Devices or Scientific Instrumentation will also be considered.
The company boasts state-of-the-art labs and workshops specially designed to support your success. They also provide on-site gym facilities, nearby running and cycling tracks for your fitness needs, and wellness programs to assist you as needed.
It is expected that you hold a degree in electronics or a related field that has prepared you for an electronics engineer role within the Medical Devices sector.
In addition to the challenging work and exceptional facilities, you will receive a competitive starting salary, bonuses, pension benefits, healthcare coverage, dental benefits, and other perks typically associated with blue-chip companies.
If you are interested in working on life-saving technologies, we recommend applying now to avoid missing out on this excellent opportunity.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Are you looking to work for a global leading technology company? Are you keen work with cutting edge instrumentation? If so, then our client has the role for you!
In this Senior Electronics Engineer - Analogue/Digital job you must have electronics and engineering knowledge and experience in combination with good design and problem-solving ability to develop products that meet performance and cost targets and that are completed on time. You will operate in a central role within a multidisciplinary project team and take responsibility for technical leadership, product specification, systems design, evaluation programs and troubleshooting. An understanding of all aspects of system design is critical.
To apply for this Senior Electronics Engineer - Analogue/Digital job you will require a combination for the following skills:
Minimum of good Honours Degree in Electronics
Approximately 5 years practical experience in design and development of new products in one or more of these areas:
Analogue circuit design, layout and optimisation, specifically for low signal amplification and high-performance closed loop systems.
Digital signal processing, including an excellent understanding and application of sampling theory, noise reduction, filtering and digital signal conditioning
VHDL (less important)and low-level programming in C and assembler – useful
EMC / compliance testing
This is a fantastic role working for a business with a growing R&D team. They are keen for someone to join the business who is passionate about engineering & is looking for a long term & progressive career within the business.
To apply for this Senior Electronics Engineer - Analogue/Digital job please email rwilcocks@redlinegroup.Com or phone 01582 87 8810.....Read more...
Quality Engineer – Electrical / Electronic
Are you an experienced Quality professional with a background in electronics manufacturing and a passion for compliance, quality systems, and continuous improvement?
I'm currently supporting a global electronics manufacturer specialising in power solutions including DC-DC converters, AC-DC converters, magnetics, and electronic components. They are looking to hire a Quality Engineer to support the ongoing maintenance, compliance and continual improvement of their Integrated Management System in line with ISO 9001, ISO 14001 and IATF 16949 standards.
Key responsibilities for this Quality Engineer (Electrical / Electronic) role based in Milton Keynes:
Maintaining and continuously improving the integrated Quality & Environmental Management System in accordance with ISO 9001, ISO 14001 and IATF 16949 standards
Planning, conducting and supporting internal audits, whilst acting as a key contact for external certification and customer audits
Investigating non-conformities, customer complaints and internal quality issues using structured root cause analysis and CAPA methodologies
Monitoring and reporting quality KPIs, analysing trends and identifying opportunities for continuous improvement
Supporting New Product Introduction (NPI), verification and validation activities, process changes and customer-specific requirements across the business
Requirements for this Quality Engineer (Electrical / Electronic) role based in Milton Keynes:
Proven Quality Engineering or Quality Assurance experience within a manufacturing environment, ideally electronics
Good working knowledge of ISO 9001, with ISO 14001 and IATF 16949 experience highly desirable
Experience planning, leading or supporting internal and external audits
Strong problem-solving capability using structured methodologies such as 8D, FTA, Ishikawa and CAPA
Familiarity with quality tools including FMEA, Control Plans, SPC, MSA, 5S and Kaizen would be advantageous
Knowledge of ESD control standards and electronics workmanship standards such as IPC-A-610 would be beneficial
Degree, HND or equivalent experience in Electronics, Engineering, Manufacturing, Quality or a related discipline
Lead Auditor qualification desirable
To apply, please send your CV to KGraveney@redlinegroup.Com or call **Kyle on 01582 878817
....Read more...
Electronics Design Engineer – Medical Devices FPGA – Cambridge
An exciting and growing Medical Devices organization based in Cambridge is currently seeking an experienced Electronics Design Engineer to work on the development of life-saving and life-improving Medical Devices.
With a primary focus on FPGA design, you will collaborate with other electronics engineers, mechanical engineers, software engineers, physicists, and scientists in the development of these Medical Devices.
In addition to FPGA Design, you will also engage in hands-on prototype development, using soldering to construct the electronics you have designed.
You will be working with highly complex technologies, ensuring that your work remains challenging every day.
Ideally, you would have prior experience in electronics design for Medical Devices. However, we are open to candidates from other highly regulated sectors, as long as your expertise lies in FPGA electronics design.
It is expected that you hold a degree in electronics engineering. Nevertheless, if you have transitioned into an Electronics Design Engineering role through an alternative path, we would still like to hear from you, as industry experience holds significant importance.
Your dedication will be rewarded with an excellent starting salary, opportunities for career development, job security, bonuses, a pension plan, life assurance, and other outstanding benefits.
Given the anticipated high level of interest in this role, if you are seeking a new opportunity, we recommend submitting your application promptly to avoid missing out.
For more information, please do not hesitate to contact Andrew Welsh, Director of Medical Devices Recruitment, and Scientific Recruitment Specialist at Newton Colmore, at +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will get in touch with you.
Newton Colmore Consulting is a specialized recruitment company operating within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
An exciting opportunity has arisen for a Cheshire based Electronics Maintenance Engineer to join this leading provider of electronic design and assembly services.
Based at their site in Cheshire they are seeking an Electronics Maintenance Engineer to be responsible for maintaining a wide variety of high tech assembly equipment along with general infrastructure maintenance.
**This Cheshire based company operate a 4x day working week, Monday to Thursday 7am to 5pm.**
Key skills required for Electronics Maintenance Engineer:
Maintenance of surface mount and associated assembly machinery, including; Juki and Europlacer placement machines; Reflow Ovens, Solder Paste Printers and Automatic Optical Inspection.
Generation of clear and comprehensive maintenance records for traceability purposes.
Liaison with external Service Engineers to arrange site visits to conduct annual service and calibration of machinery.
Maintenance, and supervision of specialist contractors, for building services including heating, electrical, water, compressed air and nitrogen.
Management of test schedules and associated records to meet statutory requirements for specific equipment and infrastructure.
This is a great opportunity for someone to join a growing organisation.
APPLY NOW! Please send your CV to adighton@redlinegroup.Com, or for more information contact Adam on 01582 878821....Read more...
An exciting opportunity has arisen for a Principal Electronics & Embedded Software Engineer to join a team developing innovative medical and technology products, taking ideas from concept through to manufacture for some of the world's leading companies.
The business has expanded its global capability while maintaining a reputation for exceptional engineering, strong project leadership, and delivery within regulated and safety-critical markets. This role sits within a rapidly growing technical team developing complex electromechanical products from concept through to manufacture.
This position is ideal for an experienced Principal Electronics & Embedded Software Engineer looking to step into a principal-level role, lead multidisciplinary teams, and take ownership of full product architectures while contributing to business growth and client development.
Main Responsibilities of the Principal Electronics & Embedded Software Engineer (Cambridge):
Develop electronics and embedded software(C/C++) for diverse and technically complex new products
Lead the integration of electromechanical product designs through to manufacture and production transfer
Take technical ownership of product architecture from concept generation through to launch
Deliver technical progress to clients and, over time, lead multidisciplinary project teams
Contribute to requirements definition, specification development, schematic capture, PCB layout, hardware bring-up, debugging, and product validation
Support project planning, resourcing, and leadership activities
Build strong client relationships and support the conversion of new opportunities into commercial contracts
Requirements of the Principal Electronics & Embedded Software Engineer(Cambridge):
Proven industry experience designing, prototyping, and testing electronic circuits and systems, including embedded software development in C/C++
Strong practical electronics skills including soldering, PCB rework/modification, wiring, and use of common laboratory test equipment
Experience across the electronic product development lifecycle from concept through to prototype and manufacture
Ability to work effectively within cross-disciplinary teams, with strong written, verbal, and presentation skills
A First or 2:1 degree in Engineering from a leading university (UK top 10 or equivalent)
Eligibility to work in the UK (visa sponsorship not available)
Experience in project planning, leadership, or team coordination would be advantageous
Working Pattern & Benefits:
Full-time, permanent role
Competitive salary and performance-based bonus structure
Career development support including mentoring and personal training budgets
Opportunity to work on innovative, safety-critical products in regulated international markets
Exposure to multinational clients and potential travel opportunities
Ethical working environment focused on improving lives through engineering excellence
To apply please send your CV to mbelmar@redlinegroup.Com, or for more information contact Mike Belmar on 01582 878807.
....Read more...
Test Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: PCB, Testing, Electronics
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We are seeking a skilled Test Engineer to join our client's team, who is responsible for developing test requirements, creating test instructions, and testing PCBs, assemblies, and systems. The ideal candidate will have a strong background in electronics and measurement technology, with practical experience in handling measuring equipment and a good understanding of radio frequency and power engineering.
Main Responsabilities:
Development of test requirements and new test methods in collaboration with the development department
Creation of test instructions and test reports
Testing, repairing (requires e.g. soldering skills) and commissioning of PCB’s, assemblies and systems as well as participation in tests in the test field
Checking production orders and goods receipt material according to quality characteristics
Perform factory inspections with customers
Management of measuring equipment storage
Construction of test facilities for the rationalization of test procedures
Required Competencies:
Completed technical training in the direction of electronics/measurement technology, technician school, an advantage
Practical experience in handling measuring equipment
Knowledge of radio frequency and power engineering is an advantage
Excellent knowledge of German and English
Positive attitude to work
Reliable team player with a pronounced quality awareness
Enjoy working independently
Benefits:
Competitive salary and benefits package – Up to CHF 110k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 80-110k + Bonus Benefits
Tech Stack: PCB, Testing & Electronics
Applicants for the Test Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/TESARG80110....Read more...
Medical Devices Electronics Engineer – Circuits Design – Embedded Software – Cambridge
A growing Medical Devices company, based in Cambridge, is currently looking for an experienced Electronics Engineer to assist with the circuit design of a range of brand-new Medical Devices that will contribute to life-saving and life-improving technologies.
Due to the growth in workload across the business, they need a couple of people in this role. The company is hoping to introduce skillsets to the business that they currently don't possess. Consequently, it would be highly advantageous if you have experience as an Electronics Engineer who has worked on PCB design, circuit design, embedded software, or firmware engineering.
The types of Medical Devices you will be working on will change regularly. Therefore, it would be beneficial if you have experience working on a variety of projects throughout your career. Although experience with Medical Devices would be useful, we are open to candidates with experience in other highly regulated sectors.
The invention and improvement of Medical Devices are the core focus of this company, meaning you will always be working on the cutting edge of the sector, continuously learning new things.
In addition to having some industry experience, it is expected that you hold a degree in an electronics-related field or another field that has led you into an electronics engineering role.
This is a great company for advancing your career due to working on complex products and continued skills/industry training. Apart from this you will be rewarded with an excellent starting salary, bonuses, enhanced pension, higher than normal holiday allowance and other excellent benefits.
I anticipate a lot of interest in this role, so if you are interested, I suggest submitting your application now to avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Scientific recruitment specialists Newton Colmore, on 0121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you. Please note we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
Maintenance Engineer
Worcester
£40,000 - £50,000 + Overtime (OTE £48,000 - £55,000+) + Training and development + Growing Company + Door to Door Pay + Car + Package + IMMEDIATE START
Join a well-established engineering team in a supportive and positive working environment as a Maintenance Engineer. This is an excellent opportunity to become a specialist within the industry, with full technical training and ongoing professional development provided. In return, they are seeking a dedicated engineer who is looking for a long-term career with the business.
The company operates within the power electronics sector, delivering bespoke solutions across a range of industries, including water treatment, commercial office buildings, and hospitals. Due to continued growth and increasing demand for their services, they are looking to recruit a skilled Maintenance Engineer who takes pride in delivering exceptional service and maintaining the highest standards of workmanship. If this sounds like you, Apply now!
As A Maintenance Engineer You Will:
* Be flexible with national travel * Carry out installation and servicing * Be responsible for fault finding and diagnosing machine issues * Be working on inverters and drives
The Successful Maintenance Engineer Must Have:* Strong electrical background * ANY experience within Automation / Electronics industries or similar * Desire to learn and train * Full UK driving licence * Commutable to Malvern and surrounding areas happy to travel
For immediate consideration please call Matthew on 07458163042 or click to apply
Keywords: Electrical, Maintenance engineer, field, field service, field service engineer, electrical engineer, industrial machinery, maintenance, electrical maintenance, inverted drive, drive systems, drive, single phase, 3 phase, Malvern, Worcester, West midlands, Ledbury, Gloucester ....Read more...
Senior Electronics Engineer – Medical Devices Invention – Warwick
A growing Medical Devices company are currently seeking an experienced Electronics Engineer to contribute to the invention and development of brand-new Medical Devices. Based in the Warwick area, you will be involved in developing cutting-edge technologies.
Working alongside physicists, mechanical engineers, scientists, and other Medical Devices experts, you will be involved in creating lifesaving and life-improving Medical Devices.
You should have a background in designing and developing Medical Devices to ISO 13485, IEC 62304, and EN 60601 standards.
It would be beneficial if you have experience on various types of Medical Devices during your career, such as Medical Robotics, Wearable Diagnostics, Injectable Treatment and other complex Medical Devices with electronics design at the core of the technology.
To be successful in the role, it is expected that you would hold a degree in electronics, physics, or other subject that enabled you to work on the electronics design of medical devices.
In addition to working on the latest areas of Medical Devices and Healthcare Technology, you will also be rewarded with an excellent starting salary, bonus, pension, healthcare, and other outstanding benefits that are not typically available with most companies.
This is an exciting role where you can focus on new types of Medical Devices, so I anticipate a lot of interest. If you are interested, I suggest you submit an application now or risk missing out.
You will be on-site five days a week; hybrid or remote working is not currently possible.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Biotech recruitment specialists Newton Colmore, on +44 121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Data Science, Machine Learning, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors.....Read more...
Test Development Engineer
Location: Colchester, Essex (Hybrid – 3 Days Onsite / 2 Days Remote)
An opportunity has arisen for a Test Development Engineer to join a leading designer and manufacturer of high-performance embedded computing solutions serving aerospace, defence, telecommunications, industrial, transportation and other mission-critical markets.
The organisation develops advanced embedded computing platforms, single board computers, networking products and high-reliability electronic systems used in some of the world's most demanding applications. With continued investment in product innovation and manufacturing capability, the business is experiencing significant growth and expanding its engineering team to support an increasing pipeline of new product introductions.
This is a technically challenging engineering role focused on developing and supporting Automated Test Equipment (ATE) solutions that enable the efficient manufacture of complex embedded computing hardware. Working closely with hardware, software, manufacturing and verification teams, you will influence product testability from the earliest stages of development through to full-scale production.
This role would suit an engineer with experience designing Automated Test Equipment (ATE), developing manufacturing test solutions or supporting production test systems who enjoys solving complex technical challenges within a collaborative engineering environment.
Main Responsibilities of the Test Development Engineer (Colchester):
Define Design for Testability (DfT) requirements during new product development and PCB design reviews
Develop and maintain Automated Test Equipment (ATE) requirements for new embedded hardware platforms
Design and specify ATE hardware including fixtures, interface test adapters (ITAs), harnesses, switching systems and interface electronics
Work closely with software engineers to develop automated production test sequences and diagnostic routines
Support New Product Introduction (NPI), pilot builds and transition into volume manufacturing
Validate and qualify production test systems prior to manufacturing release
Troubleshoot production test failures and carry out root cause investigations
Drive improvements in manufacturing yield, throughput and overall test efficiency
Produce and maintain technical documentation including test procedures, schematics, maintenance guides and interface documentation
Support ongoing maintenance, calibration and continuous improvement of deployed ATE systems
Collaborate with hardware, firmware, software, manufacturing and quality teams to optimise product test strategies
Support production growth through scalable, high-performance automated test solutions
Requirements of the Test Development Engineer (Colchester):
Proven experience developing or supporting Automated Test Equipment (ATE) within an electronics manufacturing environment
Strong understanding of electronic hardware including analogue and digital circuits, power systems and high-speed interfaces
Experience designing production test systems for complex electronic assemblies or embedded computing products
Knowledge of Design for Testability (DfT), Built-In Self-Test (BIST) and diagnostic methodologies
Experience working with oscilloscopes, programmable power supplies, switching hardware and electronic test instrumentation
Strong fault-finding and root cause analysis skills
Experience working closely with software engineers to develop integrated hardware and software test solutions
Excellent technical documentation and requirements capture skills
Ability to work collaboratively across multidisciplinary engineering teams
Experience within one or more of the following technologies would be advantageous:
Embedded computing systems
Single Board Computers (SBCs)
VPX, VME or CompactPCI architectures
Automated Test Equipment (ATE)
PCB and multilayer board design
Manufacturing and production test systems
Functional test and environmental testing
High-reliability electronics
Defence electronics
Aerospace electronics
Industrial computing platforms
Desirable:
Experience within aerospace, defence, telecommunications or industrial electronics sectors
Knowledge of SMT manufacturing, PCB assembly and functional test processes
Experience improving manufacturing yield and production throughput
Ability to design custom electronics for test fixtures and adapters
Experience supporting qualification and environmental testing programmes
Understanding of manufacturing process optimisation and production scalability
Working Pattern & Benefits:
Hybrid working — 3 days onsite in Colchester and 2 days remote
Opportunity to work on technically advanced embedded computing platforms used in mission-critical applications
Join a rapidly growing engineering organisation with significant investment in new product development
Work across the full product lifecycle from concept through to production
Annual company profit share bonus
Private healthcare
Company pension with up to 10% employer contribution
25 days annual leave plus bank holidays and holiday purchase scheme
Life assurance and income protection
Enhanced parental leave
Cycle to Work and salary sacrifice schemes
Employee Assistance Programme and virtual GP
Excellent long-term technical and career development opportunities
To apply for this Test Development Engineer role, please send your CV to Kishan Chandarana: kchandarana@redlinegroup.Com....Read more...
