Electronic Design Engineer required to work on detailed hardware design, building test equipment for research and device deployment. This is a hands on technical leadership role, suiting a Seinor or Pricipal Enigneer with international standards test and compliance process management knowledge.
Requirements
Schematic CAD experience taking designs through to production.
Experience of designing analogue front ends, ESD protection and for EMC
Experience with board bring up and debugging
Electronics Engineering degree or equivalent and commercial design experience.
Embedded C microcontrollers
Altium
PCB layout
RF and high-speed data busses ....Read more...
Electronic Design Engineer required to work on detailed hardware design, building test equipment for research and device deployment. This is a hands on technical leadership role, suiting a Seinor or Pricipal Enigneer with international standards test and compliance process management knowledge.
Requirements
Schematic CAD experience taking designs through to production.
Experience of designing analogue front ends, ESD protection and for EMC
Experience with board bring up and debugging
Electronics Engineering degree or equivalent and commercial design experience.
Embedded C microcontrollers
Altium
PCB layout
RF and high-speed data busses ....Read more...
Electronics Design Engineer required to work on RF Antenna terminals for airborne, border protection and maritime communications in the defence avionics and mobile wireless networking industries.
You will join a team working at the cutting edge of RF and Microwave Ku/Ka, GNSS and LTE satellite phased array system design and development.
Technical environment
Electronic Circuit Design and layout, Schematic Design, safety critical electronics, Altium, satellite terminals, Analogue, DC low frequency circuits, SPICE, satellite phased array RF systems, RFIC, line-up, PCB, digital electronics, FPGA, ASIC, SD modems, mixed signal, RFSoC, Algorithms, Digital Signal Processing, RTL Design, Filter Design, High Frequency Electronics, ANSYS HFSS, High speed, ADC, DAC, serial communications, Audio, signal conditioning, programmable logic design, Xilinx and Altera, RFID, EMC, ESD.
Your primary contribution will be PCB hardware satellite terminal design ....Read more...
Electronics Design Engineer required to work on RF Antenna terminals for airborne, border protection and maritime communications in the defence avionics and mobile wireless networking industries.
You will join a team working at the cutting edge of RF and Microwave Ku/Ka, GNSS and LTE satellite phased array system design and development.
Technical environment
Electronic Circuit Design and layout, Schematic Design, safety critical electronics, Altium, satellite terminals, Analogue, DC low frequency circuits, SPICE, satellite phased array RF systems, RFIC, line-up, PCB, digital electronics, FPGA, ASIC, SD modems, mixed signal, RFSoC, Algorithms, Digital Signal Processing, RTL Design, Filter Design, High Frequency Electronics, ANSYS HFSS, High speed, ADC, DAC, serial communications, Audio, signal conditioning, programmable logic design, Xilinx and Altera, RFID, EMC, ESD.
Your primary contribution will be PCB hardware satellite terminal design ....Read more...
Senior Electronics Design Engineer – Consumer Electronics
I am currently recruiting on behalf of a world-renowned consumer electronics company that has been designing and manufacturing high-volume products supplied to households across the globe for many years.
Based in Amsterdam, the company is looking to appoint its first Netherlands-based Electronics Specialist, joining an established international engineering team.
This role will involve the design of analogue and digital circuitry, hands-on prototyping, validation and verification, close collaboration with engineering teams based in Asia, and the technical leadership of complex, high-volume projects.
Key skills and experience required for this Senior Electronics Design Engineer role:
Senior-level experience in mixed-signal analogue and digital circuit design
Experience working within a small engineering team in a consumer electronics environment (ideally a start-up or scale-up)
Strong background in prototyping, validation and verification of electronic products
Proven experience leading high-volume product development projects
Ability to relocate to, or be based full-time in, Amsterdam
To apply for this Senior Electronics Design Engineer position based in Amsterdam, Netherlands, please send your CV to NDrain@redlinegroup.Com Or call +44 (0)1582 878828 to speak with Nick.....Read more...
An exciting opportunity has arisen for a Test Development Engineer to join this global leader specialising in high-tech electronic technologies based in Portsmouth, Hampshire.
Due to continued growth, they are seeking a Test Development Engineer to join their diverse engineering teams and be responsible for analysing customer requirements to develop Analogue, Digital and Mixed Signal Test Platforms, including hardware and software design.
Key skills required for the Test Development Engineer job based in Portsmouth:
Degree qualified in Electronics Engineering or related discipline
Experience of developing Test solutions for Analogue and Mixed Signal components
Experience with Pascal, C++, C#, Visual basic hands-on programming
Credence D0, ASLx or COHU experience ideal
PCB Design – Altium, OrCad, EAGLE CAD
This is a unique chance to join a forward-thinking company in the exciting technology market who can offer the opportunity of career progression and personal development.
To apply for this Test Development Engineer job based in Portsmouth, please send your CV to bwiles@redlinegroup,com, or for more information contact Ben Wiles on 01582 878816.....Read more...
Software Development Engineer required with Embedded C and application programming experience C#.Net, ASP or SQL to code software that automates the Electronics manufacturing process.
Key skills
Electrical Engineering
Embedded C
C#, MS-SQL and ASP.
Responsibilities
Develop test scripts and processes for new product development
Design and develop digital and analogue electronic circuits
PLC programming
Software Development Engineer required with Embedded C and application programming experience C#.Net, ASP or SQL to code software that automates the Electronics manufacturing process.
Key skills
Electrical Engineering
Embedded C
C#, MS-SQL and ASP.
Responsibilities
Develop test scripts and processes for new product development
Design and develop digital and analogue electronic circuits
PLC programming
RF Engineer required to join a Security Cleared team Designing linear high power wide band RF amplifiers up to 200 Watts using GaN or LDMOS electronic circuits and sub assemblies for military and airborne use.
You work as part of a small dynamic RF and Hardware team and contribute across the full product lifecycle from requirements, design, test, release and support of RF designs.
Requirements
Transmitter and Receiver circuit design for military or airborne systems, MIL-STDs or DO160.
GaN or LDMOS high power wide band RF amplifiers up to 200 Watts.
RF filter design.
Antenna design with LNA, Down converter and Upconverters
PCB Design Software and RF simulation tools.
Altium, Cadence AWR Microwave Office, Ansys HFSS.
Bachelors, Masters or PhD degree in related subject
British Citizen or ability to obtain required security clearance (SC).
Responsibilities
RF Design, System Architecture, RF Simulation, Schematic capture, PCB Layout and Footprint.
Design Reviews as logical.
Design verification against specifications.....Read more...
An exciting opportunity has arisen for an Electrical Engineer to join a high-performing engineering team developing cutting-edge flight simulation technology. These systems replicate real-world aircraft environments and play a critical role in pilot training and aviation safety worldwide.
This role offers the chance to work at the forefront of aerospace innovation, contributing to the design and delivery of advanced electrical and electro-mechanical hardware systems in a fast-paced, customer-driven environment.
You will play a key role in the design, development, and delivery of electrical hardware solutions for complex simulation systems. Working within a multidisciplinary team, you will contribute across the full engineering lifecycle, from concept through to validation and delivery.
Key Responsibilities for the Electrical Engineer
- Design and develop electrical hardware systems for advanced flight simulators
- Produce technical specifications, schematics, and electrical designs
- Develop power distribution systems (single & three-phase), including protection and cable sizing
- Collaborate with software, systems, and mechanical teams to deliver integrated solutions
- Ensure compliance with industry standards and safety-critical requirements
- Conduct testing, validation, and troubleshooting of hardware systems
- Support EMC design and testing activities
- Engage with suppliers for component selection and integration
- Contribute to continuous improvement and innovation across hardware capabilities
- Support or mentor junior engineers where appropriate
Skills & Experience required by the Electrical Engineer
- Degree in Electrical / Electronic Engineering or similar
- 510+ years experience in electrical hardware design (aerospace, defence, simulation, or similar)
- Strong experience with:
- Electrical design and power distribution systems
- Electrical CAD tools (schematics, wiring diagrams, panel layouts)
- EMC principles (grounding, shielding, filtering)
- Hardware testing, validation, and troubleshooting
- Knowledge of BS 7671, Low Voltage Directive, EMC Directive
- Experience working across the full product lifecycle (concept to production)
- Strong communication skills and ability to work within multidisciplinary teams
Desirable Experience required by the Electrical Engineer
- Chartered Engineer (or working towards)
- Experience in flight simulation, avionics, or aerospace systems
- Exposure to computing system integration (rack systems, cooling, data cabling)
- Background in high-reliability or safety-critical environments
Benefits
- Competitive salary + discretionary annual bonus
- Pension (matched up to 7%)
- 25 days holiday + bank holidays (with option to buy/sell)
- Private medical insurance
- Life assurance (4x salary)
- Group income protection
- Employee assistance & wellbeing support (24/7)
- Retail, travel, and leisure discounts
This is a fantastic opportunity for an experienced electrical engineer looking to work on complex, high-impact systems at the cutting edge of aerospace technology.
TT....Read more...
The Manufacturing Engineer is responsible for complex electronic assemblies. Perform the lead role in the implementation of LEAN manufacturing processes and use of Six Sigma tools.
You will become an expert in the manufacturing processes, train shop floor personnel and monitor key metrics. Also solve complex manufacturing problems and take an active role in troubleshooting quality and production yield related issues within manufacturing.
Key skills
Min BSc or BEng in Electrical, Electronic, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Role responsibilities
Lean Six Sigma, responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality, responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues. ....Read more...
The Manufacturing Engineer is responsible for complex electronic assemblies. Perform the lead role in the implementation of LEAN manufacturing processes and use of Six Sigma tools.
You will become an expert in the manufacturing processes, train shop floor personnel and monitor key metrics. Also solve complex manufacturing problems and take an active role in troubleshooting quality and production yield related issues within manufacturing.
Key skills
Min BSc or BEng in Electrical, Electronic, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Role responsibilities
Lean Six Sigma, responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality, responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues. ....Read more...
We are seeking a Senior Systems Integration Engineer to join a leading engineering company based in North London. This role involves working across the design, integration, and testing of complex systems, collaborating with multidisciplinary engineering teams.
Key Responsibilities
Support systems design, integration, and test activities.
Contribute across the full product lifecycle from concept through to delivery.
Work with software, mechanical, and electrical engineering teams.
Produce technical documentation, specifications, and reports.
Support system verification and validation activities.
Requirements
Degree in Engineering, Physics, Mathematics, or equivalent experience.
Experience in systems integration, design, or testing.
Understanding of systems and product lifecycle development.
Strong communication and technical documentation skills.
UK driving licence and eligibility for UK Security Clearance.
Experience with radar, RF, or electronic systems.
Knowledge of communication protocols
Experience with test equipment (oscilloscopes, spectrum analysers, multimeters).
Background in defence, aerospace, or complex engineering environments.....Read more...
The Mechanical Manufacturing Engineer is responsible for complex electronic assemblies. Performing the lead role in implementing manufacturing processes and techniques using LEAN and Six Sigma tools.
Experience
Min BSc or BEng in Mechanical, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Responsibilities
Lean Six Sigma
Responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality
Responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues.....Read more...
The Mechanical Manufacturing Engineer is responsible for complex electronic assemblies. Performing the lead role in implementing manufacturing processes and techniques using LEAN and Six Sigma tools.
Experience
Min BSc or BEng in Mechanical, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Responsibilities
Lean Six Sigma
Responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality
Responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues.....Read more...
We are looking for a skilled PLC Software Engineer. You will be involved in delivering high-quality engineering services and innovative solutions to water and wastewater clients across the UK.
Key Requirements
Commercial experience in PLC programming (ideally in the water or wastewater industry).
Siemens PLC training or experience.
Site commissioning experience, including testing, troubleshooting, and client support.
Strong understanding of automation and process control systems.
Knowledge of electrical control panels.
Relevant qualifications in Electrical or Electronic Engineering.
Full UK driving licence.
Key Skills
Design, develop, program, and test PLC control systems.
Specify, design, and build PLC software solutions based on client requirements.
Carry out on-site commissioning of control systems.
Provide technical support during installation and handover.
Work closely with internal teams and clients to deliver high-quality engineering outcomes.....Read more...
We are looking for a skilled PLC Software Engineer. You will be involved in delivering high-quality engineering services and innovative solutions to water and wastewater clients across the UK.
Key Requirements
Commercial experience in PLC programming (ideally in the water or wastewater industry).
Siemens PLC training or experience.
Site commissioning experience, including testing, troubleshooting, and client support.
Strong understanding of automation and process control systems.
Knowledge of electrical control panels.
Relevant qualifications in Electrical or Electronic Engineering.
Full UK driving licence.
Key Skills
Design, develop, program, and test PLC control systems.
Specify, design, and build PLC software solutions based on client requirements.
Carry out on-site commissioning of control systems.
Provide technical support during installation and handover.
Work closely with internal teams and clients to deliver high-quality engineering outcomes.....Read more...
Are you an Embedded Software Engineer with 5+ years’ experience ready to step into a senior role?
Or an established Senior Embedded Software Engineer seeking a fresh technical challenge in an open, collaborative environment?
If so, this could be an excellent opportunity.
My client, based in Cambridgeshire, is a leading European designer and manufacturer of electronic test instruments and laboratory power supplies, supplying customers in over 50 countries worldwide. They are also one of the UK’s largest distributors of test and measurement equipment, representing major American, European, and Japanese brands.
Skills and Experience required for this Senior Embedded Software Engineer role based in Cambridgeshire:
Extensive experience in embedded firmware development and system architecture
Strong proficiency in C/C++, RTOS, and low-level interfaces (SPI, I2C, UART)
Solid understanding of microcontrollers, SoCs, and hardware/software co-design
Experience with system-level design, performance optimisation, and fault tolerance
Desirable Experience for this Senior Embedded Software Engineer role based in Cambridgeshire:
Background in safety-critical systems and compliance standards
Familiarity with modern development tools (Git, CI/CD, static analysis)
Strong analytical and problem-solving skills
Experience with real-time operating systems (e.G. FreeRTOS)
This is a fantastic opportunity to join a well-established, forward-thinking organisation offering an excellent technical environment and a competitive package. The role provides long-term career progression within a continually growing business.
To apply for this Senior Embedded Software Engineer role based in Cambridgeshire, please send your CV to Kyle Graveney at KGraveney@redlinegroup.Com....Read more...
Security Cleared Firmware Engineer – DSP Engineer - Cambridge – Spin-Out Company
A new Spin-Out company, based in Cambridge, providing product development for Security Cleared sectors, is currently looking for an experienced Firmware Engineer or DSP Engineer to work on a wide range of new technologies.
You will be working on a range of new technology inventions, providing expert approaches to Firmware Engineering and DSP Engineering applications. Due to the varied nature of the work, we ideally seek someone with knowledge of FPGA, DSP design and engineering, DSP Modelling, and design using embedded systems. Not all of these areas are required, but having experience in as many as possible in your past roles as a Firmware Engineer or DSP Engineer would be advantageous.
Specific experience working on high-speed electronic systems would be ideal but is not essential.
If you have previously worked in a security-cleared environment, it would be fantastic, although not essential as they are open to candidates from different sectors. However, you must be able to obtain security clearance. This usually means being a British Citizen or residing in the UK for five years in continuous employment. If you already hold security clearance from another source, this would be acceptable.
You are going to work on some extremely interesting projects that will help you continually develop your career. Apart from this, you will receive an excellent starting salary and a benefits package in line with the parent company, along with continuous career training for future progression.
We are looking for someone to start as soon as possible, so if you are interested, we recommend making an application now to avoid missing out. However, we understand you may have a long notice period, which can be normal in this sector.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on 0121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
An exciting opportunity has arisen for an Electrical Hardware Engineer to join a high-performing engineering team developing cutting-edge flight simulation technology. These systems replicate real-world aircraft environments and play a critical role in pilot training and aviation safety worldwide.
This role offers the chance to work at the forefront of aerospace innovation, contributing to the design and delivery of advanced electrical and electro-mechanical hardware systems in a fast-paced, customer-driven environment.
You will play a key role in the design, development, and delivery of electrical hardware solutions for complex simulation systems. Working within a multidisciplinary team, you will contribute across the full engineering lifecycle, from concept through to validation and delivery.
Key Responsibilities
- Design and develop electrical hardware systems for advanced flight simulators
- Produce technical specifications, schematics, and electrical designs
- Develop power distribution systems (single & three-phase), including protection and cable sizing
- Collaborate with software, systems, and mechanical teams to deliver integrated solutions
- Ensure compliance with industry standards and safety-critical requirements
- Conduct testing, validation, and troubleshooting of hardware systems
- Support EMC design and testing activities
- Engage with suppliers for component selection and integration
- Contribute to continuous improvement and innovation across hardware capabilities
- Support or mentor junior engineers where appropriate
Skills & Experience
- Degree in Electrical / Electronic Engineering or similar
- 510+ years experience in electrical hardware design (aerospace, defence, simulation, or similar)
- Strong experience with:
- Electrical design and power distribution systems
- Electrical CAD tools (schematics, wiring diagrams, panel layouts)
- EMC principles (grounding, shielding, filtering)
- Hardware testing, validation, and troubleshooting
- Knowledge of BS 7671, Low Voltage Directive, EMC Directive
- Experience working across the full product lifecycle (concept to production)
- Strong communication skills and ability to work within multidisciplinary teams
Desirable Experience
- Chartered Engineer (or working towards)
- Experience in flight simulation, avionics, or aerospace systems
- Exposure to computing system integration (rack systems, cooling, data cabling)
- Background in high-reliability or safety-critical environments
Benefits
- Competitive salary + discretionary annual bonus
- Pension (matched up to 7%)
- 25 days holiday + bank holidays (with option to buy/sell)
- Private medical insurance
- Life assurance (4x salary)
- Group income protection
- Employee assistance & wellbeing support (24/7)
- Retail, travel, and leisure discounts
This is a fantastic opportunity for an experienced hardware engineer looking to work on complex, high-impact systems at the cutting edge of aerospace technology.
TT....Read more...
An exciting opportunity has arisen for an Embedded Software Engineer to join a high-performing R&D team developing next-generation audio products.
This role focuses on designing and developing embedded firmware for DSP processors at the core of advanced audio systems. You will work at the intersection of embedded software, electronics, and digital signal processing, contributing to innovative, high-performance products.
Youll be involved throughout the full product lifecycle, from early concept and prototyping through to development and delivery, collaborating closely with multidisciplinary teams including acoustics and electronics engineers.
Key Responsibilities for the Embedded Software Engineer
- Develop real-time embedded software for DSP-based applications
- Write low-level drivers for on-chip and board-level peripherals
- Design and prototype audio processing algorithms (MATLAB), then implement in C/C++
- Contribute to software architecture and define interfaces between processors
- Collaborate with acoustics engineers to enhance sound quality and system performance
- Support bring-up and debugging of prototype hardware, using lab equipment such as oscilloscopes and logic analysers
- Develop and maintain clear technical documentation
- Participate in peer code reviews and contribute to continuous improvement
Skills & Experience required by the Embedded Software Engineer
Essential:
- Degree in Electronic Engineering, Computer Science, or a related discipline
- Strong C/C++ programming skills (typically 6+ years experience)
- Proven experience with real-time embedded systems
- Familiarity with electronics design and debugging techniques
- Experience developing embedded software for complex hardware products
- Knowledge of modern development tools and practices (Git, Jira, Agile)
Desirable:
- Experience with DSP processors (e.g. Analog Devices SHARC or similar)
- Knowledge of audio DSP techniques such as filter design, FFT, sample rate conversion, and dynamic range control
Why Apply?
- Work on cutting-edge audio products at the forefront of innovation
- Be part of a collaborative, multidisciplinary R&D environment
- Contribute across the full product lifecycle, from concept to delivery
- Opportunity to combine technical depth with creative problem-solving
TT....Read more...
Are you an experienced Electronics Design Engineer looking for a role with real technical ownership and influence?Deeter Electronics is looking for a Senior / Lead Electronics Design Engineer to join its established team. This is a senior role within a long-standing, family-owned engineering business, offering the chance to lead product design from concept through to production.You'll be involved in both new product development and the improvement of existing products, working closely with manufacturing, sales and fellow engineers in a small, experienced team.Key responsibilities
Lead electronic product design from concept to productionProduce schematics, PCB layouts, prototypes, testing and validationImprove and maintain existing product designsSupport component selection, obsolescence and design updatesDevelop and maintain test equipmentProduce engineering documentation and manualsProvide technical support to manufacturing and salesContribute to design reviews and continuous improvement
Skills and experience
Degree, HNC/HND in Electronics or similar, or equivalent experienceStrong experience in analogue and digital circuit designStrong PCB layout experienceExperience with electromechanical systems, sensors or instrumentationEmbedded firmware experience, mainly C on Microchip PICAble to work independently and take technical ownershipPractical, hands-on problem solver
Desirable
Hazardous area, ATEX, IECEx or safety-critical product experienceExperience supporting manufacturing and certificationExperience developing production or test equipment
Why apply?
Senior role with real responsibility and influenceWork on specialist, safety-critical productsEstablished and stable engineering businessSupportive, experienced and collaborative team
Apply now if you're looking for a senior electronics role where you can take ownership, solve real engineering problems, and make a genuine impact.....Read more...
Power Electronics Engineer — Medium Power (100 W–10 kW)
Clevedon, Somerset
Our client is seeking an experienced Power Electronics Engineer to join their engineering team, contributing to the design and development of advanced medium-power electronic systems.
This role offers hands-on involvement across the full product lifecycle, working on power conversion, control electronics, and embedded systems typically in the 100 W–10 kW range.
You will work closely with multidisciplinary teams to deliver robust, production-ready designs for modern electrical and industrial applications.
Key Responsibilities:
Design and develop medium-power electronics (100 W–10 kW) including:
Power conversion stages
Analog and digital control circuitry
Signal conditioning and feedback systems
Produce high-quality schematic designs, component selection, and multi-layer PCB layouts.
Perform simulation, prototyping, debugging, and verification testing.
Support new product introduction from concept through production.
Collaborate with test, manufacturing, and service teams to ensure reliable and manufacturable designs.
Contribute to continuous improvement of design processes and product performance.
Ensure compliance with ISO9001, ISO14001, EMC requirements, and relevant safety standards.
Qualifications & Experience
Degree in Power Electronics, Electronics Engineering, Embedded Systems, or equivalent.
Strong background in hardware and power electronics design, including: Analog and digital circuit design, Power supply and converter design, High-quality PCB layout (OrCad preferred)
You can be experienced from 1 year all the way through to Senior level.
This position offers a rare balance between hands-on power electronics design, analog engineering, and real-world medium-power systems, making it ideal for engineers who enjoy working across both control electronics and power hardware.
Please send your CV to ndrain@redlinegroup.Com Or call 01582878828 to speak with Nick Drain for more information.....Read more...
An exciting opportunity has arisen for a Cheshire based Electronics Maintenance Engineer to join this leading provider of electronic design and assembly services.
Based at their site in Cheshire they are seeking an Electronics Maintenance Engineer to be responsible for maintaining a wide variety of high tech assembly equipment along with general infrastructure maintenance.
**This Cheshire based company operate a 4x day working week, Monday to Thursday 7am to 5pm.**
Key skills required for Electronics Maintenance Engineer:
Maintenance of surface mount and associated assembly machinery, including; Juki and Europlacer placement machines; Reflow Ovens, Solder Paste Printers and Automatic Optical Inspection.
Generation of clear and comprehensive maintenance records for traceability purposes.
Liaison with external Service Engineers to arrange site visits to conduct annual service and calibration of machinery.
Maintenance, and supervision of specialist contractors, for building services including heating, electrical, water, compressed air and nitrogen.
Management of test schedules and associated records to meet statutory requirements for specific equipment and infrastructure.
This is a great opportunity for someone to join a growing organisation.
APPLY NOW! Please send your CV to adighton@redlinegroup.Com, or for more information contact Adam on 01582 878821....Read more...
An urgent job as a Senior Test & Diagnostics Engineer has arisen in Great Yarmouth, Norfolk for a company that offers a 9 day working fortnight!
An exciting new job has arisen for a Senior Test & Diagnostics Engineer, based in Great Yarmouth, Norfolk to support implementation of the test set up, and verification plan and support diagnostics and fault finding, including tuning as required as part of the production process.
The ideal Senior Test & Diagnostics Engineer, based in Great Yarmouth, Norfolk will have;
Understanding of Python, C# or Labview based automated test systems
Understanding of test equipment such as Multimeters, Oscilloscopes. Network analysers, spectrum analysers, power meters, frequency converters etc.
Understanding of electronic circuits and component level testing
This is for a company that specialise in the design and manufacture of secure communication devices for predominately the defence and aerospace sectors. They offer a range of excellent benefits from a 9 day working fortnight, hybrid working, flexitime as well as assisting with relocation costs of up to £8,000.
APPLY NOW! For the Senior Test & Diagnostics Engineer job located in Great Yarmouth, Norfolk by sending a cover letter and CV to TDrew@redlinegroup.Com or by calling Tom Drew on 01582 878848 or 07961158762 quoting ref. THD1306. Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 01582 878 848 for a confidential discussion.....Read more...
