Senior Analog Circuit Design Engineer
Analog Digital, Signal, SPICE, FPGA, Microprcessor
Senior Analog Circuit Design Engineer required to design and develop electronic circuits with an emphasis on analog and mixed signal circuit design including low noise amplifiers, analog-to-digital converters and power Electronics. My client is a global designer and manufacturer of electronic devices.
Candidate requirements
Masters in Electrical / Electronic Engineering.
Extensive experience working with Signals, Analog circuit (Amplifiers, Filters, transistors etc.).
Experience working with FPGAs and Microprocessors.
Knowledge and working experience with Electronic Simulation Software such as SPICE, Schematic capture etc.....Read more...
Senior Analog Circuit Design Engineer
Analog Digital, Signal, SPICE, FPGA, Microprcessor
Senior Analog Circuit Design Engineer required to design and develop electronic circuits with an emphasis on analog and mixed signal circuit design including low noise amplifiers, analog-to-digital converters and power Electronics. My client is a global designer and manufacturer of electronic devices.
Candidate requirements
Masters in Electrical / Electronic Engineering.
Extensive experience working with Signals, Analog circuit (Amplifiers, Filters, transistors etc.).
Experience working with FPGAs and Microprocessors.
Knowledge and working experience with Electronic Simulation Software such as SPICE, Schematic capture etc.....Read more...
Are you an Oxford based Senior Electronic Design Engineer – Analogue/Digital looking for a new exciting role to join a company who are world leaders in navigation systems?
My client are looking for a Senior Electronic Design Engineer – Analogue/Digital to join their R&D team in Oxford, to design and maintain hardware and embedded software for their legacy products. This opportunity will include all aspects of products design from initial concept through to production.
The responsibilities for this Senior Electronic Design Engineer – Analogue/Digital are:
- Develop complex hardware for existing and new products, covering the full product life cycle
- Develop the embedded software for microprocessors covering the full software life cycle
- Capture customer/user requirements, then design, develop, test and maintain software
- Manage complex projects; plan, track and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives
- Install, use, and maintain tools and technologies such as PCB design tools and software development environments
The skills/experience needed for this Senior Electronic Design Engineer – Analogue/Digital is:
- Good experience and knowledge of schematic capture, PCB design and layout for complex systems
- Good firmware/ embedded C/C++ experience in real time systems
- Experience of testing firmware for low to medium volume production
- Experience of working with inertial sensors / inertial navigation systems or Digital Signal Processing is desirable
- Practical networking experience (Ethernet, CAN, etc.) Is desirable
To apply for this fantastic Senior Electronic Design Engineer – Analogue/Digital, based in Oxford job please email SKhuttan@redlinegroup.Com or call Sophie on 01582 878817 or 07961158586 for more information.....Read more...
An exciting opportunity has arisen for an Opto-Mechanical Design Engineer based in Great Yarmouth, Norfolk, to join a leading engineering company that design a range of electronic systems for aerospace and defence applications.
The main purpose of the Opto-Mechanical Design Engineer role, based in Great Yarmouth, Norfolk, is to provide technical design expertise for opto-electronic product development, supporting manufacturing and new product introduction.
Some of the key experiences and competencies for the Electronic Design Engineer, based in Great Yarmouth, Norfolk will require a background in developing opto-electronic products for harsh environments. This will include a strong background in mechanical design engineering and modelling using 2D and 3D designs in Solidworks.
This is a great opportunity to join a highly successful, multi-national engineering company with a fantastic working environment and benefits.
Apply Now, if this Opto-Mechanical Design Engineer job based in Great Yarmouth, Norfolk sounds like the opportunity for you, click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1296. Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 07961158762 for a confidential discussion.....Read more...
An exciting opportunity has arisen for a Senior Electronic Design Engineer based in Nottingham to join a world leading Engineering and Manufacturing company. This is a fantastic chance to join a company developing lifesaving, safety critical equipment.
You will be responsible for the design of low power, safety critical hardware to work with new and existing products, which are installed in hazardous areas. You will lead and implement new design from initial concept though to launch.
Key responsibilities for the Senior Electronic Design Engineer:
- Design, develop, simulate and test digital and analogue circuits to meet product specifications
- Ensure hardware development and testing is completed in line with the project timescales
- Create and maintain technical documentation detailing system requirements, performance analysis, design analysis, certification documents etc
- Work closely with the Engineering team and NPD Engineering team to design, develop and test products to ensure they meet the market requirements
Key skills/experience required for Senior Electronic Design Engineer:
- Degree in Electronics Engineering, or related subject or equivalent qualification
- Experienced in analogue and digital electronics
- Embedded & power electronic design, schematic capture and simulation using Altium designer (or similar)
- Knowledge of ATEX, IECEx and cCSAus hazardous area
- Knowledge of concepts such as intrinsic safety or functional safety requirements
- Experience in EMC/RFI testing
- Knowledge of embedded firmware languages (C, C++ and MISRA C etc.)
- understanding of EN 60079, IEC 61010 and EN 61508
This is a unique opportunity to join a leader in their market who can offer the opportunity for career progression and personal development, joining a well-established manufacturing site in Nottingham.
To apply for this Senior Electronic Design Engineer, based in Nottingham, please send your CV and covering letter to skhuttan@redlinegroup.Com, or for more information contact Sophie Khuttan on 01582 878817 or 07961158586.....Read more...
An exciting opportunity has arisen for an Electronic PCB Layout Engineer based in Great Yarmouth, Norfolk, to join a leading engineering company that design a range of electronic systems for aerospace and defence applications.
The main purpose of the Electronic PCB Layout Engineer role, based in Great Yarmouth, Norfolk, is to provide microelectronic product design expertise from new product introduction through to product launch. You will be developing cutting edge technologies on both PCBA and thick film hybrid circuit layouts.
Some of the key experiences and competencies for the Electronic PCB Layout Engineer, based in Great Yarmouth, Norfolk will require familiarity with PCBA techniques along with exposure to mechanical packaging / CAD package.
This is a great opportunity to join a highly successful, multi-national engineering company with a fantastic working environment and benefits.
Apply Now, if this Electronic PCB Layout Engineer job based in Great Yarmouth, Norfolk sounds like the opportunity for you, click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1298. Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 07961158762 for a confidential discussion.....Read more...
Electronic Engineer required to work on new product development by supporting the hardware design of embedded electronics systems using microprocessors, power supplies, sensor interfacing, power systems control including relays, triacs, stepper motors and user interfaces.
Experience
8, 16 and 32 bit microcontrollers also familiarity with ST, Atmel or Microchip products would be advantageous.
Circuit design and PCB layout for EMC design consideration, ideally OrCAD.
Embedded C ideally Keil or IAR.
EMC compliance testing.
Interaction of electro mechanical products and mechanisms or experience of control and system design would be desirable
The ideal candidate will be a degree qualified Electronic Engineer with an interest in consumer electronics product design and 3 to 5 years industry experience.....Read more...
Electronic Engineer required to work on new product development by supporting the hardware design of embedded electronics systems using microprocessors, power supplies, sensor interfacing, power systems control including relays, triacs, stepper motors and user interfaces.
Experience
8, 16 and 32 bit microcontrollers also familiarity with ST, Atmel or Microchip products would be advantageous.
Circuit design and PCB layout for EMC design consideration, ideally OrCAD.
Embedded C ideally Keil or IAR.
EMC compliance testing.
Interaction of electro mechanical products and mechanisms or experience of control and system design would be desirable
The ideal candidate will be a degree qualified Electronic Engineer with an interest in consumer electronics product design and 3 to 5 years industry experience.....Read more...
Are you passionate about working with discrete analog circuits and pushing the boundaries of electronic design? Our client, a leading technology company, is looking for an experienced Electronic Design Engineer to join their growing team.
Responsibilities
Utilize your expertise in discrete analog circuits to design and develop high-performance electronic systems.
Work with power amplifiers up to 100W, ensuring optimal performance and efficiency.
Conduct thorough testing and debugging to ensure the functionality and reliability of electronic designs.
Candidate Requirements
Bachelors or Masters degree in Electrical Engineering, Electronics, or a related field.
Extensive experience working with discrete analog circuits.
Proven expertise in designing power amplifiers up to 100W.
Strong knowledge of low noise electronics, HiFi audio, and handling high frequency and low distortion signals.
Proficiency in electronic design tools and software. ....Read more...
Are you passionate about working with discrete analog circuits and pushing the boundaries of electronic design? Our client, a leading technology company, is looking for an experienced Electronic Design Engineer to join their growing team.
Responsibilities
Utilize your expertise in discrete analog circuits to design and develop high-performance electronic systems.
Work with power amplifiers up to 100W, ensuring optimal performance and efficiency.
Conduct thorough testing and debugging to ensure the functionality and reliability of electronic designs.
Candidate Requirements
Bachelors or Masters degree in Electrical Engineering, Electronics, or a related field.
Extensive experience working with discrete analog circuits.
Proven expertise in designing power amplifiers up to 100W.
Strong knowledge of low noise electronics, HiFi audio, and handling high frequency and low distortion signals.
Proficiency in electronic design tools and software. ....Read more...
A job as an Electronics Engineer is urgently required for a in Cambridge, Cambridgeshire.
An exciting new job has arisen for an Electronics Engineer, based in Cambridge, Cambridgeshire to work for a world leader in the design and manufacture of custom RF, microwave and millimetre wave components and subsystems.
The Electronics Engineer, located in Cambridge, Cambridgeshire will be responsible for the design and development of RF/mmW sub-circuits, sub-modules and systems within telecommunications and defence products. You will play a pivotal role in the analogue and digital circuit design, schematic capture and PCB layout, ensuring that electrical performance, quality, cost and manufacturability requirements are met.
The ideal Electronics Engineer, based in Cambridge, Cambridgeshire will have previous experience across;
Experience in circuit schematic, multi-layer, mixed-technology layout using Altium Design package.
Component level electronic circuit design, layout, and development.
Digital circuits utilising glue logic, ADCs, DACs & microprocessors.
APPLY NOW! For the Electronics Engineer job, located Cambridge, Cambridgeshire by sending a cover letter and CV to TDrew@redlinegroup.Com or by calling Tom Drew on 01582 878848 quoting ref. THD1215. Otherwise, we always welcome the opportunity to discuss other roles similar to Electronic Engineering jobs on 01582 878 848.....Read more...
A fantastic job opportunity has arisen for a Senior Manufacturing Engineer in Eastbourne, East Sussex. My client is a global centre of excellence, specialising in the design and manufacture of electronic controllers, instrumentation, and drives.
The role as the Senior Manufacturing Engineer in Eastbourne will be leading the NPI Development team and will be responsible for liaising with the relevant design staff to ensure the overall quality and delivery of new parts, to the highest standards. You will also work to ensure the proposed design concepts can be manufactured cost-effectively. You will oversee the prototype build of products in question, prepare relevant documentation and actively participate in PFMEAs (Process Failure Mode Effects Analysis) and DFMEs (Design Failure Mode and Effect Analysis). This role will also require you to work with Operations personnel to allow for the optimisation and layout of the assembly areas, as well as the assembly tooling used in the NPI build.
The Senior Manufacturing Engineer must have experience with PCBA and leading a manufacturing or production team.
As the Senior Manufacturing Engineer in Eastbourne, you will have experience in a New Product Introduction (NPI) and New Product Development (NPD) role within electronics assembly, and/or PCB/cable assembly or electronics box build as well as experienced in the use of ERP/MRP systems (SAP Preferable). You will also have an Engineering Degree or equivalent and provable experience in a similar position. Awareness of all types of electronic printed circuit assembly techniques is beneficial.
My client are a Market Leader who combine over 30 years of experience within the Electronic engineering with the attitude and opportunity of a start-up company.
APPLY NOW for the Senior Manufacturing Engineer Eastbourne job RMW1115, or to apply for similar jobs, by sending your CV to rwilcocks@redlinegroup.Com, otherwise, we always welcome the opportunity to discuss other production jobs on 01582 878 810 or 079317 88834....Read more...
Power Electronics Engineer
FPGA, PCB, Power Electronics, Electronics Design, DC Motors, Invertors
Are you an Electronics Engineer? Are you looking for a new challenging position in Aerospace sector?
I have a client looking for an Electronics Engineer to join their multi-functional Engineering team. Your primary responsibility will be to design, build, test and analyse the electronics systems.
Role Requirements
Proficient in Electronic hardware design.
Extensive experience in design and analysis of invertors for electric motors.
Knowledge and working experience with Power Electronics.
Knowledge and experience working with PCBs.
Hands on Experience working with FPGAs.....Read more...
Power Electronics Engineer
FPGA, PCB, Power Electronics, Electronics Design, DC Motors, Invertors
Are you an Electronics Engineer? Are you looking for a new challenging position in Aerospace sector?
I have a client looking for an Electronics Engineer to join their multi-functional Engineering team. Your primary responsibility will be to design, build, test and analyse the electronics systems.
Role Requirements
Proficient in Electronic hardware design.
Extensive experience in design and analysis of invertors for electric motors.
Knowledge and working experience with Power Electronics.
Knowledge and experience working with PCBs.
Hands on Experience working with FPGAs.....Read more...
Electronic System and Hardware Design Engineer required to work with research teams designing novel military, marine and aeronautical battery systems. My client designs and manufactures specialist batteries, chargers and intelligent power management systems for rugged, high-performance applications.
Skills
Mixed signal analogue and digital system design experience, of measurement or data acquisition circuits.
Degree qualified with commercial electronics design and test experience.
Prototyping, debugging and functional testing of complex electronic boards.
Power electronics knowledge, ideally of DC-DC converter-based systems.
Microprocessor hardware design.
Also practical electrical skills e.g. soldering, troubleshooting, wiring and general test equipment.....Read more...
Electronic System and Hardware Design Engineer required to work with research teams designing novel military, marine and aeronautical battery systems. My client designs and manufactures specialist batteries, chargers and intelligent power management systems for rugged, high-performance applications.
Skills
Mixed signal analogue and digital system design experience, of measurement or data acquisition circuits.
Degree qualified with commercial electronics design and test experience.
Prototyping, debugging and functional testing of complex electronic boards.
Power electronics knowledge, ideally of DC-DC converter-based systems.
Microprocessor hardware design.
Also practical electrical skills e.g. soldering, troubleshooting, wiring and general test equipment.....Read more...
Are you a Systems Engineer - Electronics looking for a new role based in Bedford?
My client are leaders in their field with a significant global presence and specialise in electronic enclosures and systems for critical industries, Aerospace and Defence, who are seeking a Systems Engineer - Electronics based in Bedford to join their team.
Key responsibilities for the Systems Engineer - Electronics based in Bedford:
Design of high-reliability, rugged systems for demanding aerospace and commercial applications.
Electrical / Electronic design including backplanes, power supplies and interface controls.
Liaising with customers to ensure compliant product design within timescales and on budget.
Generation of schematics, manufacturing data, bills of materials and specifications.
Generation of test and compliance documentation (test instructions, compliance matrices and verification documentation)
Maintaining and recording project data to ensure accurate records of design decisions, selections and changes during the design process.
Experience of the following would be an advantage for the Systems Engineer - Electronics based in Bedford
Awareness of military standards (DEF STD and MIL STD) for equipment
Knowledge of EMC and / or environmental test methods and procedures
Knowledge of UKCA / CE, RoHS and WEEE directives (EN60950 / EN62368)
Experience of working with CAD Software
APPLY NOW for the Systems Engineer - Electronics based in Bedford by sending your CV to SKhuttan@redlinegroup.Com or call on 01582 878817/ 07961 158586 quoting SKK1128. We always welcome the opportunity to discuss other engineering jobs.....Read more...
An exciting opportunity has arisen for a Cheshire based Graduate Electronic Component Engineer to join this leading provider of electronic design and assembly services.
Based at their site in Cheshire they are seeking a Graduate Electronic Component Engineer to be responsible for the selection, introduction and maintenance of components and associated documentation.
This Cheshire based company operate a 4x day working week, Monday to Thursday 7am to 5pm.
Key skills required for Graduate Electronic Component Engineer
Experience within an electronics environment
Experience with MRP / ERP systems would be ideal
Excellent verbal and written communication skills
This is a great opportunity for someone to join a growing organisation.
APPLY NOW! Please send your CV to ntyler@redlinegroup.Com, or for more information contact Natalie Tyler on 01582 878808 or 07751240250.....Read more...
An exciting opportunity has arisen for a Cheshire based Electronic Component Engineer to join this leading provider of electronic design and assembly services.
Based at their site in Cheshire they are seeking an Electronic Component Engineer to be responsible for the selection, introduction and maintenance of components and associated documentation.
This Cheshire based company operate a 4x day working week, Monday to Thursday 7am to 5pm.
Key skills required for Electronic Component Engineer:
Experience within an electronics environment
Experience with MRP / ERP systems would be ideal
Excellent verbal and written communication skills
This is a great opportunity for someone to join a growing organisation.
APPLY NOW! Please send your CV to ntyler@redlinegroup.Com, or for more information contact Natalie Tyler on 01582 878808 or 07751240250.....Read more...
A unique opportunity has arisen for a Senior Electronics Design Engineer to join the world leading Product Design Consultancy based in Warwickshire.
Working with customers across a variety of industries their globally operating development teams have helped to create some of the market-leading products within the medical, scientific, consumer and transport markets.
Due to continued growth, they are seeking a Senior Electronics Design Engineer to be based from their Warwickshire campus where you will be instrumental in the design and development of analogue and digital electronic specifications, designs and investigations. Working closely with customers you will be significant in the development of new designs, evaluation of new technologies and guidance of projects across multiple disciplines.
Key skills and experience for Senior Electronics Design Engineer:
Proven background in broad electronics design across analogue and digital
Degree educated with a 1st or 2:1 from a highly reputable electronics university
Excellent verbal and written communication skills
Innovative and creative initiative with a desire to work with complex electronic products
Experience within medical instrumentation / devices would be an advantage
This is a great opportunity to work with a global recognised company who work with some of the world’s leading technology based organisations. A business that offers their employees the freedom to be creative, work across a variety of industries and be able to create career development and personal growth.
To apply for Senior Electronics Design Engineer based in Warwickshire, please send your cv to ntyler@redlinegroup.Com, or for more information contact Natalie Tyler on 01582 878808 or 07751240250.....Read more...
Our client, a world class development company who are global leaders in their industry, are currently in the process of developing new products to release to the market. As such, they are looking to recruit an experienced Contract Electronics Design Engineer for an initial 6 months to help them deliver on these projects, onsite 5 days a week at their office in Cambridgeshire.
This contract will not accept candidates operating via a PSC, therefore you will be required to work via an Umbrella company.
In this contract you will be responsible for working with existing circuits and making small changes as needed, checking electronic components to ensure they have the correct ROSH status, testing using an oscilloscope and writing up reports on those tests.
Key skills required for the Contract Electronics Design Engineer, Cambridgeshire:
- Strong experience using Altium and OrCAD
- Proven experience in DFMEA
- Electronic testing using oscilloscopes
- Having experience working to IEC 62368 would be desirable
For further information in this Contract Electronics Design Engineer opportunity based in Cambridgeshire, please contact Maddie Ramsden quoting reference MMR1030. You can contact on 01582 878815 or 07940254185, MRamsden@Redlinegroup.Com....Read more...
PCB Design Engineer required to work on SATCOM terminal hardware in senior or leadership role as part of a team designing and implementing satellite antenna terminals. All decisions require design for manufacture considerations balancing cost, control, environment and operation practicalities.
Skills
Electronic hardware design, integration, test and refinement experience.
Complex Schematic and multilayer PCB design ideally in Altium for complex RF stackup PCBs.
Power supply design, power management, switching and regulator circuit design.
BEng, Meng in ideally Ph.D. in Electronic Engineering or equivalent.
Embedded hardware ARM and Xilinx FPGA or SoC knowledge.
High speed digital understanding with high speed bus design experience of DDR, PCIe, PS-GTR or other.
Role
Technical leadership on complex hardware designs including terminal architecture.
Verify and test hardware design in electronics laboratory using oscilloscopes and spectrum analysers reworking PCBs as makes sense.
Support product certification to electrical and operational standards.
Train and develop junior Hardware Engineers. ....Read more...
PCB Design Engineer required to work on SATCOM terminal hardware in senior or leadership role as part of a team designing and implementing satellite antenna terminals. All decisions require design for manufacture considerations balancing cost, control, environment and operation practicalities.
Skills
Electronic hardware design, integration, test and refinement experience.
Complex Schematic and multilayer PCB design ideally in Altium for complex RF stackup PCBs.
Power supply design, power management, switching and regulator circuit design.
BEng, Meng in ideally Ph.D. in Electronic Engineering or equivalent.
Embedded hardware ARM and Xilinx FPGA or SoC knowledge.
High speed digital understanding with high speed bus design experience of DDR, PCIe, PS-GTR or other.
Role
Technical leadership on complex hardware designs including terminal architecture.
Verify and test hardware design in electronics laboratory using oscilloscopes and spectrum analysers reworking PCBs as makes sense.
Support product certification to electrical and operational standards.
Train and develop junior Hardware Engineers. ....Read more...
Are you looking for a new Optical Design Engineer – PhD opportunity based in the Torquay, Devon area?
If you are, an exciting opportunity has arisen for an Optical Design Engineer – PhD based in Devon to join a global leading electronics company specialising in a range of niche markets. This presents the opportunity to work on the development of a range of products including fibre optic components, high power optical amplifiers and optical transmitter sub-systems, with applications across multiple markets
The key responsibilities of this Optical Design Engineer – PhD is:
Design and develop optical and fibre-optic components, modules and subsystems
Exploit fibre optic and opto-electronic components to develop cutting edge products
Management of a small team of technical engineers
Active involvement in prototype build & test
Project management opportunities – plan and manage budgets on key projects
Key skills/experience for this Optical Design Engineer – PhD job:
Degree or PhD in Engineering or Physics with Optics, Photonics or Fibre optics bias
Commercial experience in the product development of fibre optics or laser products
Knowledge and experience in optical amplifiers, fibre-optics and photonics
Hands-on experience building and testing fibre-optic components or opto-electronic modules
Knowledge & experience in high power fibre lasers/fibre amplifiers, non-linear optics, Photonic Integrated Circuits, Acousto-optics is desirable not essential
This is a great chance to join a growing company who can offer personal development & long-term career progression.
To apply for this Optical Design Engineer – PhD based in Torquay, Devon please send your CV to SKhuttan@redlinegroup.Com quoting SKK1108, or for more information please call Sophie on 01582 878817 / 07961 158586.....Read more...
Principal Design and Development Engineer required to work on optical detection systems design and development. The ideal candidate will have a strong practical and theoretical background making them able to lead research, design and development teams as part of a wider Engineering department.
Skills
Principal or Senior Engineer experience, partly in a design for manufacture environment.
Post graduate min Masters level qualifications in Optics, LIDAR, instrument design or comparable.
Electronics design experience of electronic components or products using embedded software.
Embedded C bare metal coding.
Responsibilities
Leading Engineering product development.
Leading technical investigations and allocating resources.
Technical research
Mentoring other members of the Engineering team.....Read more...
