Are you an Electronics Design Engineer with proven experience in PCB design, embedded systems and electronic hardware development?
This role offers the opportunity to join an expanding R&D team, based in Aberystwyth, where you will play a key role in the design, development, testing and manufacture of innovative electronic instruments, taking products from initial concept through to full production.
Key Responsibilities for this Electronics Design Engineer role in Aberystwyth, Wales:
Design electronic schematics and PCB layouts, including circuit simulation and verification
Build, test and debug prototype instruments incorporating analogue and digital electronics
Support new product introduction, design for manufacture and transfer of products into production
Develop testing, calibration and manufacturing processes while ensuring product quality and compliance
Requirements for this Electronics Design Engineer role based in Aberystwyth, Wales:
Proven experience in electronics development, including PCB design and layout
Degree in Electronics, Electrical Engineering or a related discipline
Strong knowledge of embedded systems, ARM-based microcontrollers and communication protocols
Experience with electronic testing, prototype debugging and EMC compliance (Altium Designer and HDI PCB design desirable)
To apply for this Electronics Design Engineer role, please email NDrain@redlinegroup.Com or call Nick on 01582878828.....Read more...
Our client, a leading manufacturer of products for highly regulated industries including Marine, Medical, and more, are looking for an Electronic Engineer based in Newark to join their team on a permanent basis.
This is an office-based role supporting the development of innovative control panel and interface technologies for blue-chip customers across a range of industries.
Key responsibilities of the Electronic Engineer job based in Newark:
Support the design, development and testing of electronic hardware products.
Manage and implement hardware design changes driven by cost, obsolescence, or performance improvements.
Prepare technical specifications, reports, and documentation to a high professional standard.
Perform fault finding and debugging of electronic devices.
Conduct quality and reliability analysis (e.G. MTBF).
Support EMC testing and wider electrical validation activities.
Work closely with production and production engineering teams to resolve issues and drive improvements.
Experience required for the Electronic Engineer job based in Newark:
Degree qualified in Electrical/Electronic Engineering, Computer Engineering or similar.
Experience in an electronics design or manufacturing environment.
Experience designing analogue and digital circuits using tools such as Altium Designer.
Strong understanding of EMC design and compliance testing.
Experience with digital communication protocols (e.G. SPI, I2C, USB).
Strong documentation and reporting skills.
Ability to work independently and manage multiple tasks effectively.
Knowledge of programming languages (e.G. C/C#) and simulation tools (e.G. SPICE) would be advantageous.
If this Electronic Engineer job based in Newark could be of interest, please send your CV to jthompson@redlinegroup.Com or call James on 01582 878831....Read more...
Our client, a leading designer and manufacturer of life safety technology, are looking for an Electronics Engineer to join their team in Cambridge on a permanent basis.
This is an exciting opportunity to work on the design and development of high-reliability electronic products, taking ownership of projects throughout the full product lifecycle, from concept and prototyping through to certification and production.
Key responsibilities of the Electronics Engineer job based in Cambridge:
Design and develop analogue, mixed-signal and embedded electronic circuits for innovative products.
Perform circuit simulation, schematic capture and PCB layout using Altium Designer.
Develop prototypes, proof-of-concept designs and support board bring-up activities.
Define and execute design verification and validation (V&V) plans, including testing and performance validation.
Support New Product Introduction (NPI) activities and work closely with manufacturing partners.
Contribute to product architecture, design reviews and cost optimisation initiatives.
Investigate product failures, perform root cause analysis and implement corrective actions.
Support compliance and certification activities, preparing technical documentation where required.
Collaborate with multidisciplinary engineering teams including software, mechanical, manufacturing and compliance engineers.
Experience required for the Electronics Engineer job based in Cambridge:
Degree in Electronics Engineering, Electrical Engineering or a related discipline.
Experience in an electronics design and development environment.
Strong practical experience in analogue and mixed-signal electronic circuit design.
Proficiency with PCB design tools, ideally Altium Designer.
Experience in electronic prototyping, testing and debugging.
Good understanding of the complete electronic product development lifecycle.
Strong communication skills with the ability to work effectively within multidisciplinary teams.
If this Electronics Engineer job based in Cambridge could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816.....Read more...
A fantastic job opportunity has arisen for a Lead Manufacturing Engineer in Eastbourne, East Sussex. My client is a global centre of excellence, specialising in the design and manufacture of electronic controllers, instrumentation, and drives.
The role as the Lead Manufacturing Engineer in Eastbourne will be leading the NPI Development team and will be responsible for liaising with the relevant design staff to ensure the overall quality and delivery of new parts, to the highest standards. You will also work to ensure the proposed design concepts can be manufactured cost-effectively. You will oversee the prototype build of products in question, prepare relevant documentation and actively participate in PFMEAs (Process Failure Mode Effects Analysis) and DFMEs (Design Failure Mode and Effect Analysis). This role will also require you to work with Operations personnel to allow for the optimisation and layout of the assembly areas, as well as the assembly tooling used in the NPI build.
The Lead Manufacturing Engineer must have experience with PCBA and leading a manufacturing or production team.
As the Lead Manufacturing Engineer in Eastbourne, you will have experience in a New Product Introduction (NPI) and New Product Development (NPD) role within electronics assembly, and/or PCB/cable assembly or electronics box build as well as experienced in the use of ERP/MRP systems (SAP Preferable). You will also have an Engineering Degree or equivalent and provable experience in a similar position. Awareness of all types of electronic printed circuit assembly techniques is beneficial.
My client are a Market Leader who combine over 30 years of experience within the Electronic engineering with the attitude and opportunity of a start-up company.
APPLY NOW for the Lead Manufacturing Engineer Eastbourne job, or to apply for similar jobs, by sending your CV to rwilcocks@redlinegroup.Com, otherwise, we always welcome the opportunity to discuss other production jobs on 01582 878 810....Read more...
An exciting opportunity has arisen for an Electronics Test Development Engineer based in Fareham to join this global leader in advanced gas sensors supporting a wide range of industries.
Due to continued growth our client is looking for an experienced Electronic Test Development Engineer to join its multi disciplined engineering team and play a key role in the design, development, support and continuous improvement of electronic systems used within advanced gas sensor manufacturing and automated test environments.
Reporting to the Engineering Manager, you will support the development, commissioning, maintenance and improvement of electronic hardware used in Automated Test Equipment, automation projects and manufacturing systems. You will work closely with R&D, Production, Quality, suppliers and customers to deliver robust engineering solutions that support both operational performance and product innovation.
Key skills & experience required for Electronic Test Development Engineer:
Experienced Electronics Engineer, with sufficient knowledge of mixed signal test & repair
Ability to design PCB / test boards independently
Electronics fault finding and repair on test equipment
Knowledge of LabVIEW / NI would be an advantage
Qualified in HNC/HND or equivalent in a related discipline
British citizen / passport holder applicants ONLY. The role is required to be onsite 5 days a week. Monday to Thursday, 8:30am to 5:00pm, and Friday, 9:00am to 3:00pm.
If you are an experienced Electronics Test Development Engineer who enjoys solving technical challenges, improving manufacturing capability and contributing to innovative sensor technology, this is a fantastic opportunity to join a growing business with global backing and ambitious plans for the future.....Read more...
RF Microwave Engineer
Location: Abingdon, Oxfordshire – On-Site
An exciting opportunity has arisen for an RF Microwave Engineer to join a specialist engineering business developing advanced high-power microwave technologies for scientific, industrial and emerging energy applications.
The organisation focuses on the design, development, prototyping, manufacture and testing of high-power microwave systems and components. Its engineering capabilities span microwave sources, transmission systems and specialist electronic devices, supporting complex projects that require innovative RF engineering solutions.
This role offers the opportunity to contribute to a variety of technically challenging projects, including microwave transmission system design, power beaming and microwave source development. The successful candidate will be involved in electromagnetic modelling, hardware integration, commissioning and testing, working alongside a multidisciplinary engineering team.
The position would suit an RF or Microwave Engineer with experience in system design, electromagnetic simulation, analysis or practical testing. Candidates with a strong technical foundation, a hands-on approach to engineering and an interest in developing advanced microwave technologies are encouraged to apply.
Main Responsibilities of the RF Microwave Engineer (Abingdon, Oxfordshire):
Design and develop high-power RF and microwave systems, including kW to MW-class applications
Contribute to projects involving microwave transmission systems, power beaming and microwave source development
Support the design and development of specialist electronic devices and associated technologies
Model and simulate microwave systems, components and beam propagation using electromagnetic simulation tools
Use software such as HFSS, CST or equivalent tools to support engineering analysis and design optimisation
Specify, integrate and assemble RF and microwave hardware for development and testing activities
Provide RF and microwave engineering expertise to multidisciplinary teams throughout the design process
Commission, test and troubleshoot high- and low-power microwave equipment
Work with both internally developed systems and commercially supplied equipment
Analyse test results, investigate technical issues and contribute to design improvements
Support prototyping, validation and the development of advanced microwave technologies
Follow appropriate laboratory procedures and safety requirements, particularly when working with high-voltage equipment
Requirements of the RF Microwave Engineer (Abingdon, Oxfordshire):
Degree in Electrical or Electronic Engineering, Physics, RF or Microwave Engineering, or a related discipline
Candidates with alternative technical qualifications and demonstrable relevant industry experience will also be considered
Experience in at least one of the following areas: RF or microwave system design, analysis or testing
Experience using electromagnetic simulation software such as HFSS, CST or equivalent
Strong analytical and problem-solving skills
Ability to interpret technical requirements and contribute to engineering design decisions
Ability to work effectively within a multidisciplinary engineering team
A practical, hands-on approach to engineering development, testing and troubleshooting
Experience in one or more of the following technology areas would be highly advantageous:
High-Power RF and Microwave Systems
Electromagnetic Modelling and Simulation
Microwave Transmission Systems
Microwave Sources and Specialist Electronic Devices
RF Hardware Integration and Assembly
Microwave Laboratory Testing and Commissioning
Antenna Design and Beam Propagation
High-Voltage Engineering and Safety
Desirable:
Experience working with high-power microwave systems or specialist electronic devices
Knowledge of microwave sources, amplifiers or related technologies
Practical laboratory experience using RF and microwave test equipment
Knowledge of antenna design, transmission systems or beam propagation
Experience commissioning and testing RF hardware
Familiarity with high-voltage systems and associated safety requirements
To apply for this RF Microwave Engineer opportunity, please send your CV to Kishan Chandarana at Redline Group:
Kchandarana@redlinegroup.Com....Read more...
An innovative technology business at the forefront of advanced electronic systems development is seeking an experienced Contract Power Electronics Engineer, based in Horley, Surrey to support the design and delivery of next-generation power conversion and control solutions.
Working within a highly skilled engineering team, you will play a key role in the development of complex electronic products used across demanding industrial and technology-driven applications. You will work as part of a team on a brand new design project where everything is done in house from initial design through to manufacture.
As our client is considered exempt for IR35 purposes, the successful candidate will be responsible for assessing IR35 status, should you wish to operate via your own PSC.
Key skills required for Contract Power Electronics Engineer based in Horley, Surrey:
- Experience in 3 phase PFC front end design
- Experience with debugging, commissioning and validation
- Experience using Pulsonix/Cadstar
- Experience in highly regulated industries
For more information or to apply for the Contract Power Electronics Engineer opportunity based in Horley, Surrey please contact Jack Kelly – jkelly@redlinegroup.Com / 01582 878812 quoting reference JWK1084.....Read more...
Part-Time Electronics Engineer – Surrey
Up to £55K pro rata + Benefits
Redline has been retained by a leading process instrumentation manufacturer who are looking for a Part-Time Electronics Engineer to join their R&D team based in Surrey.
Due to continued growth, they are looking for an experienced Electronics Engineer to support the design, development and testing of analogue and digital electronics across new and existing products. These products are used across a range of regulated industries, providing the opportunity to work on technically interesting and varied projects.
You will be involved across the full electronics development lifecycle, including circuit and PCB design, prototyping, electronic test and validation, as well as working with software interfaces.
Due to the nature of the products and the industries they operate within, candidates will need to be British Citizens.
Key skills and experience:
Proven experience working within an electronics engineering environment
Experience within a regulated industry such as Defence, Aerospace, Medical or Automotive would be advantageous
Degree qualified in Electronics or a related discipline
Experience with analogue and digital circuit design
PCB design and development
Electronic testing and validation
Strong written and verbal communication skills
This is an excellent opportunity for an Electronics Engineer looking for a part-time position with a growing organisation, offering the chance to work on a range of interesting products while developing your skills and career.
Part-time | On-site in Surrey | Up to £55K pro rata + benefits
For more information, or to discuss the role in confidence, please get in touch with Nick Drain at Redline Group.NDrain@redlinegroup.com or 01582 878828....Read more...
An established engineering organisation is looking for a Hardware Engineer to design and develop bespoke electrical and electronic hardware for complex test systems across aerospace, defence, space and other regulated industries.
You'll work across the full engineering lifecycle, from requirements capture and design through to manufacture, integration, testing and customer acceptance. Working alongside multidisciplinary engineering teams, you'll have the opportunity to tackle varied technical challenges and take ownership of your designs.
Key Responsibilities
- Design electrical and electronic hardware for bespoke automated and manual test systems.
- Translate customer requirements into practical hardware solutions and system architectures.
- Select and integrate instrumentation, power supplies, data acquisition equipment and communications hardware.
- Produce electrical schematics, wiring diagrams, bills of materials and technical documentation.
- Support hardware procurement, manufacture, integration, fault-finding and testing.
- Contribute to verification, validation, commissioning and customer acceptance.
- Collaborate with software, systems, mechanical and production engineering teams.
- Identify technical risks, component obsolescence and opportunities to improve performance and reliability.
Essential Skills and Experience
- A degree, HNC/HND or equivalent experience in Electrical Engineering, Electronic Engineering or a related discipline.
- Experience in electrical or electronic hardware design.
- Good understanding of analogue and digital electronics.
- Experience with component selection, hardware integration and technical documentation.
- Practical fault-finding and diagnostic skills.
- Understanding of manufacturing, assembly and testing processes.
- Full UK-valid driving licence and right to work in the UK.
Desirable Experience
- Aerospace, defence, space or other regulated industries.
- Automated test equipment, rack-mounted systems or electrical cabinets.
- PCB design, FPGA or microcontroller technologies.
- Instrumentation, data acquisition, power electronics or EMC.
- LabVIEW, TestStand, National Instruments hardware or electrical CAD tools.
- Interfaces such as Ethernet, RS-232/422/485, CAN, SPI or I²C.
- Verification and validation, safety standards or legacy equipment modernisation.
What\'s on Offer?
- Technically varied projects across advanced engineering sectors.
- Involvement throughout the full engineering lifecycle.
- Professional development and opportunities for career progression.
- Annual performance-related bonus.
- Pension with 4% employee and 8% employer contributions.
- Family private healthcare and health cash plan.
- 27 days' annual leave plus UK bank holidays.
- Cycle-to-work scheme.
Security: Applicants must be eligible to obtain and maintain the relevant UK security clearance. Some projects may have additional nationality or residency restrictions.
If you're a hands-on Hardware Engineer looking for varied technical challenges and the opportunity to take designs from concept through to commissioning, we'd like to hear from you.
TT....Read more...
We are looking for an experienced Senior RF Electronics Engineer to join an innovative engineering team working on the development of advanced RF and electronic systems across a range of technically challenging applications.
This is an excellent opportunity for an engineer who enjoys working across different technologies and projects, taking new concepts from initial design through to prototyping, testing and successful verification.
You will work alongside experienced engineers and technical specialists, contributing to the design, development and testing of new RF-based systems and products. The role also offers the opportunity to engage directly with customers and communicate complex technical concepts clearly to non-technical stakeholders.
Applicants for this role must hold, or be eligible to hold, UK SC Clearance.
Key Responsibilities
- Design, develop and test RF and analogue electronic circuits and systems.
- Take RF products and modules from initial concept through prototyping, development and design verification.
- Perform RF, microwave and analogue circuit design and simulation.
- Contribute to the design of RF amplifiers, filters, frequency synthesisers and associated circuitry.
- Develop innovative technical solutions to complex engineering challenges.
- Work closely with multidisciplinary engineering teams throughout the development lifecycle.
- Support laboratory testing, debugging and performance optimisation using advanced RF test and measurement equipment.
- Contribute to technical reviews and communicate engineering decisions and results to both technical and non-technical stakeholders.
- Support the development and continuous improvement of engineering processes and technical approaches.
About You
You will ideally have:
- A degree or MEng in Electronic Engineering, RF Engineering or a related discipline.
- 6+ years of post-graduate experience designing RF-based circuits and systems.
- Proven experience developing RF products or modules from concept through to design verification.
- Strong microwave, RF and analogue design and simulation skills.
- Experience with RF amplifier, filter and frequency synthesiser design.
- Strong problem-solving and analytical skills.
- Excellent communication skills, with the ability to explain complex technical subjects clearly.
Desirable Experience
- Experience with radio and/or radar systems.
- Experience with open architecture standards such as OpenCPI, STICS or SOSA.
- Team leadership or line management experience.
- Digital circuit design experience.
- Experience working at mmWave frequencies.
Whats on Offer
- Competitive salary based on experience and technical expertise.
- Opportunity to work on varied and technically challenging engineering projects.
- Access to advanced electronics, RF test and measurement facilities.
- Supportive and collaborative engineering environment.
- Ongoing training and professional development.
- Opportunities for career progression across technical, commercial and leadership pathways.
- Permanent position with the opportunity to make a significant contribution to innovative RF technology development.
TT....Read more...
We are looking for an experienced Senior RF Electronics Engineer to join an innovative engineering team working on the development of advanced RF and electronic systems across a range of technically challenging applications.
This is an excellent opportunity for an engineer who enjoys working across different technologies and projects, taking new concepts from initial design through to prototyping, testing and successful verification.
You will work alongside experienced engineers and technical specialists, contributing to the design, development and testing of new RF-based systems and products. The role also offers the opportunity to engage directly with customers and communicate complex technical concepts clearly to non-technical stakeholders.
Applicants for this role must hold, or be eligible to hold, UK SC Clearance.
Key Responsibilities
- Design, develop and test RF and analogue electronic circuits and systems.
- Take RF products and modules from initial concept through prototyping, development and design verification.
- Perform RF, microwave and analogue circuit design and simulation.
- Contribute to the design of RF amplifiers, filters, frequency synthesisers and associated circuitry.
- Develop innovative technical solutions to complex engineering challenges.
- Work closely with multidisciplinary engineering teams throughout the development lifecycle.
- Support laboratory testing, debugging and performance optimisation using advanced RF test and measurement equipment.
- Contribute to technical reviews and communicate engineering decisions and results to both technical and non-technical stakeholders.
- Support the development and continuous improvement of engineering processes and technical approaches.
About You
You will ideally have:
- A degree or MEng in Electronic Engineering, RF Engineering or a related discipline.
- 6+ years of post-graduate experience designing RF-based circuits and systems.
- Proven experience developing RF products or modules from concept through to design verification.
- Strong microwave, RF and analogue design and simulation skills.
- Experience with RF amplifier, filter and frequency synthesiser design.
- Strong problem-solving and analytical skills.
- Excellent communication skills, with the ability to explain complex technical subjects clearly.
Desirable Experience
- Experience with radio and/or radar systems.
- Experience with open architecture standards such as OpenCPI, STICS or SOSA.
- Team leadership or line management experience.
- Digital circuit design experience.
- Experience working at mmWave frequencies.
Whats on Offer
- Competitive salary based on experience and technical expertise.
- Opportunity to work on varied and technically challenging engineering projects.
- Access to advanced electronics, RF test and measurement facilities.
- Supportive and collaborative engineering environment.
- Ongoing training and professional development.
- Opportunities for career progression across technical, commercial and leadership pathways.
- Permanent position with the opportunity to make a significant contribution to innovative RF technology development.
TT....Read more...
A Technical Sales Engineer is sought to join an innovative electronics manufacturing team in Hemel Hempstead, Hertfordshire, contributing to the growth of PCBA and full-turnkey electronic manufacturing services (EMS).
The Technical Sales Engineer, Hemel Hempstead, Hertfordshire, will be responsible for developing new business opportunities, building customer relationships and providing technical guidance throughout the sales process.
Responsibilities include:
Identify and secure new business opportunities with OEMs and electronics design houses requiring PCBA and EMS services
Consult with customer engineering teams to understand project requirements, schematics, BOMs and Gerber files
Deliver technical presentations showcasing SMT, THT, selective and robotic soldering, and automated optical inspection capabilities
Carry out Design for Manufacturability (DFM) and Design for Testing (DFT) reviews alongside internal NPI engineers
Advise customers on alternative components, material cost optimisation and supply chain challenges
Prepare accurate cost estimates, RFQ responses and technical proposals, negotiating contracts and volume pricing
Act as the key technical link between customers and internal engineering, production and quality teams while supporting sales territory expansion
The Technical Sales Engineer, Hemel Hempstead, Hertfordshire, will have the following key skills:
Degree in Electronics Engineering, Electrical Engineering or equivalent relevant technical experience
Experience in technical sales, application engineering or account management within PCBA or EMS
Strong understanding of Gerber files, electronic schematics, BOMs and IPC quality standards, including IPC-A-610
Proven B2B sales success, with experience managing complex sales cycles, negotiating contracts and achieving revenue targets
Excellent technical communication and relationship-building skills, with flexibility to travel up to 20–30% of the time
APPLY NOW – Technical Sales Engineer job in Hemel Hempstead, Hertfordshire could be of interest, send your CV to adighton@redlinegroup.Com or call Adam Dighton on 01582 878821....Read more...
Exciting Electronics Engineer role!
Redline has been retained by a leading process instrumentation manufacturer who are looking for an Electronics Engineer to join their R&D team based in Surrey.
Due to significant growth, they are seeking an Electronics Engineer to be responsible for the test, design and development of analogue and digital circuit design across new and existing products, going into a variety of regulated industries. You will be involved with PCB design, prototyping, test and validation and software interface.
The nature of the industry and products will require someone who is a British Citizen.
Key skills and experience for Electronics Engineer based in Surrey:
Proven experience within an electronics environment
Ideally within a regulated industry i.e. Defence, Aerospace, Medical, Automotive etc.
Degree qualified in a related Electronics discipline
Circuit and PCB design
Electronic test
Excellent verbal and written communication skills
This is an exciting opportunity to join a growing company who can offer the opportunity for career progression and personal development.....Read more...
OptoElectronics Space Systems Engineer required to join a specialist precision engineering company developing high performance components and subsystems for the space, defence and advanced technology sectors.
The role involves the design, development, integration and testing of complex opto electronic and mechatronic systems for demanding, mission critical applications.
Requirements
Degree in Electronics, Optoelectronics, Physics, Mechatronics or a related engineering discipline.
Experience developing and integrating opto-electronic or precision electromechanical systems.
Understanding of optical systems, sensors, electronics and control technologies.
Experience with system testing, verification and validation.
Knowledge of high reliability engineering, ideally within space, aerospace or defence.
Strong analytical, problem solving and communication skills.
Any experience with space qualified hardware, precision instrumentation, embedded systems or automated test equipment would be advantageous.
Responsibilities
Design and develop opto electronic systems and precision engineering solutions.
Support the integration of optical, electronic, mechanical and software components.
Develop and validate measurement, control and test systems.
Perform system testing, verification and performance analysis.
Support prototyping, product development and manufacturing processes.
Collaborate with multidisciplinary engineering teams to deliver high reliability systems.
Ensure compliance with stringent quality and performance requirements.
This is a fantastic opportunity to contribute to advanced space technology and mission critical engineering projects.....Read more...
OptoElectronics Space Systems Engineer required to join a specialist precision engineering company developing high performance components and subsystems for the space, defence and advanced technology sectors.
The role involves the design, development, integration and testing of complex opto electronic and mechatronic systems for demanding, mission critical applications.
Requirements
Degree in Electronics, Optoelectronics, Physics, Mechatronics or a related engineering discipline.
Experience developing and integrating opto-electronic or precision electromechanical systems.
Understanding of optical systems, sensors, electronics and control technologies.
Experience with system testing, verification and validation.
Knowledge of high reliability engineering, ideally within space, aerospace or defence.
Strong analytical, problem solving and communication skills.
Any experience with space qualified hardware, precision instrumentation, embedded systems or automated test equipment would be advantageous.
Responsibilities
Design and develop opto electronic systems and precision engineering solutions.
Support the integration of optical, electronic, mechanical and software components.
Develop and validate measurement, control and test systems.
Perform system testing, verification and performance analysis.
Support prototyping, product development and manufacturing processes.
Collaborate with multidisciplinary engineering teams to deliver high reliability systems.
Ensure compliance with stringent quality and performance requirements.
This is a fantastic opportunity to contribute to advanced space technology and mission critical engineering projects.....Read more...
Our client, who are a well-established UK electronics manufacturer with a rapidly growing innovation and product development division, are looking for an Electronics Engineer – Newbury to join their team on a permanent basis.
This role is based on-site in Newbury, within a fast-paced and highly capable engineering environment that combines design, PCB fabrication, and assembly under one roof. You will work across a wide variety of industries including aerospace, automotive, industrial, and IoT, leading full lifecycle product development projects from concept through to production.
Key responsibilities of the Electronics Engineer job based in Newbury:
Lead end-to-end electronics product development projects, from initial concept and specification through to prototyping and production.
Design innovative electronic systems and supporting embedded firmware.
Create schematics and PCB layouts using Altium Designer.
Develop and execute test strategies for both hardware and embedded software.
Act as the technical lead/architect on projects, collaborating with cross-functional teams where required.
Support prototype build, board bring-up, and validation activities.
Participate in design reviews and contribute to continuous improvement within an agile development environment.
Maintain accurate project documentation and manage tasks within tools such as Jira.
Ensure designs meet industry standards, manufacturability requirements, and cost targets.
Experience required for the Electronics Engineer job based in Newbury:
Degree, HNC, or HND in Electronic Engineering (or equivalent industry experience).
Strong proficiency in PCB design, schematic capture, and BOM creation using Altium Designer.
Experience with embedded systems and communication protocols such as SPI, I2C, UART, Ethernet, CAN, or LIN.
Proven ability to troubleshoot and resolve hardware and embedded software issues.
Experience working across the full product lifecycle within an agile development environment.
Familiarity with version control tools (e.G. Bitbucket) and task management systems (e.G. Jira).
Knowledge of EMC testing, compliance standards, and design for manufacture is highly desirable.
Strong communication skills and ability to lead technical discussions with customers and internal teams.
If this Electronics Engineer job in Newbury could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816.....Read more...
An exciting job opportunity has arisen for a Principal RF Design Engineer based in Norwich, Norfolk to join the market leader involved within an exciting technology sector.
Due to continued growth, they are seeking a Principal RF Design Engineer to be involved with development and progression of multiple projects.
This job is ideal for an experienced, hands-on RF and antenna engineer who enjoys technical ownership, solving complex electromagnetic challenges, and mentoring junior engineers, while contributing to the development of a strong UK-based R&D capability.
Main Responsibilities of the Principal RF Design Engineer (Hybrid):
Design, simulate, and develop RF and microwave systems
Own antenna and RF design activities from concept through simulation, prototyping, test, and production handover
Act as a senior technical contributor on projects, supporting architectural decisions and design reviews
Collaborate closely with RF, electronics, systems, and mechanical engineers to ensure optimal system integration
Support development of RF subsystems including filters, amplifiers, switches, and associated control interfaces
Perform antenna, RF, and EMC testing, correlating lab results electronic or other high-reliability environments
Practical experience across simulation, prototyping, measurement, and validation
Ability to communicate complex RF concepts clearly within multidisciplinary teams
This is a fantastic job opportunity to join a well-established, successful Norwich, Norfolk based company who are investing very heavily in R&D.
To find out more about the Principal RF Design Engineer job or other potential jobs we currently have at the moment, please contact Ricky Wilcocks on 01582 878810 or kindly email your most up to date CV and covering letter to Rwilcocks@redlinegroup.Com....Read more...
Up to £45,000 Hours: 7:30am – 4:30pm Monday to Thursday / 2:00pm Friday, Holiday: 28 days, Permanent Position. Location Manchester
We are looking for an experienced Design Engineer to work on the design and development of bespoke police, emergency service and specialist vehicle conversions.
This is a varied role taking projects from initial concept through detailed design, prototype build and into production.
The company are a leading player in their market and due to company expansion, they are seeking a design engineer to join the team.
Key Responsibilities for the Design Engineer role:
Design bespoke vehicle conversion solutions for police and emergency service vehicles.
Produce detailed 2D and 3D CAD models and manufacturing drawings.
Design brackets, mounting systems, equipment installations and vehicle modifications.
Support electrical and electronic equipment integration.
Produce BOMs, technical specifications and engineering documentation.
Ensure designs meet customer requirements and relevant safety standards.
Work closely with production, procurement and installation teams.
Support prototype builds, testing and product validation.
Resolve manufacturing issues.
Manage engineering changes and drawing revisions.
We would welcome people to apply that have:
Previous experience as a Design Engineer within automotive, vehicle conversion, specialist vehicles or manufacturing.
Strong CAD experience using SolidWorks, Autodesk Inventor, CATIA or similar.
Experience producing manufacturing drawings and documentation.
Understanding of mechanical design, fabrication and manufacturing processes.
Knowledge of automotive electrical systems would be advantageous.
HNC, HND, Degree or equivalent engineering experience.
Experience within vehicle conversions or modifications would....Read more...
A world leader in design and manufacturing of leading-edge technologies is looking for a Senior Compliance Engineer to be based at their site in East Sussex to join their growing engineering team.
The job of Senior Compliance Engineer involves:
Having a thorough understanding of standards for electronic products in safety critical environments
Responsibility for keeping up to date with standards, as well as ensuring company design process and documentation also meet criteria
Being the point of contact for the company in relation to certification authorities
PCB Layout reviews, Design reviews and holding certification meetings
In order to be successful in this role of Product Compliance Engineer based in East Sussex, you will have:
A background in quality or compliance involving electronics, and have prior knowledge of criteria to meet standards
Attention to detail and the ability to communicate effectively.
My client are not in a position to sponsor Visas.
This is a fantastic opportunity for Senior Compliance Engineer based in East Sussex to join a global leader offering fantastic career progression opportunities and very competitive salaries. To apply please send it to Ricky Wilcocks on rwilcocks@redlinegroup.Com.....Read more...
We are looking for a Senior RF Engineer to lead the design, development, and testing of RF, microwave, and antenna systems used in advanced electronic products.
Key responsibilities
Lead RF and antenna design projects (including modules and sub-contracted work)
Design and optimise microwave PCB layouts and RF systems
Perform RF component selection and system-level analysis
Support antenna design, modelling, testing, and validation
Troubleshoot RF production issues and perform root cause analysis
Work closely with manufacturing, supply chain, quality, and customers
Ensure engineering standards, documentation, and procedures are followed
Key Skills
RF PCB design at microwave frequencies
Strong knowledge of RF components (amplifiers, filters, mixers, PLLs)
RF system design (cascade analysis)
Experience with RF test equipment (VNA, spectrum analysers)
Antenna design knowledge (including array and printed antennas)
Altium and RF simulation tools
Radar or communications background
MATLAB and Python for test automation ....Read more...
We are looking for a Senior RF Engineer to lead the design, development, and testing of RF, microwave, and antenna systems used in advanced electronic products.
Key responsibilities
Lead RF and antenna design projects (including modules and sub-contracted work)
Design and optimise microwave PCB layouts and RF systems
Perform RF component selection and system-level analysis
Support antenna design, modelling, testing, and validation
Troubleshoot RF production issues and perform root cause analysis
Work closely with manufacturing, supply chain, quality, and customers
Ensure engineering standards, documentation, and procedures are followed
Key Skills
RF PCB design at microwave frequencies
Strong knowledge of RF components (amplifiers, filters, mixers, PLLs)
RF system design (cascade analysis)
Experience with RF test equipment (VNA, spectrum analysers)
Antenna design knowledge (including array and printed antennas)
Altium and RF simulation tools
Radar or communications background
MATLAB and Python for test automation ....Read more...
Power Electronics Design Engineer
My client has recently made a new opportunity available for a Power Electronics Design Engineer to join their multi-skilled R&D team based in London.
This is great opportunity to join a leading engineering organisation based in Southeast London. This is an exciting opportunity to join a global leader within advanced fibre-optic and subsea cable manufacturing.
My client is a technology business with diverse interests a variety of industries, where it is recognised for developing innovative, leading-edge technologies. They have a truly global footprint, with facilities in nearly every developed economy and a portfolio of high-value, high-profile technology projects.
The successful candidate for the London based Power Electronics Design Engineer job will:
Be degree educated in Electronic Engineering or a related discipline.
Have significant experience in the design and development of analogue power electronics.
Have proven experience designing SMPS, AC/DC and DC/DC power conversion systems.
Have experience working within the Rail, Energy, Transport or other highly regulated industrial sectors.
Be capable of providing technical leadership, mentoring engineers and driving complex power electronics projects from concept through to production.
As well as offering excellent career progression opportunities, my client provides a highly competitive package, including up to in relocation support, which can be used towards a wide range of moving expenses, including household appliances and furnishings.
For further information regarding this Power Electronics Design Engineer job based in London, please contact Ricky Wilcocks on either rwilcocks@redlinegroup.Com or 079317 88834.....Read more...
Redline Group currently has a fantastic opportunity for an experienced Product Compliance Engineer with our client based in Manchester. The company design, manufacture and sell world instrumentation for safety critical environments. They promote a great collaborative culture and are very proud of the fact they have never made anyone redundant.
The role of Product Compliance Engineer involves:
Having a thorough understanding of standards for electronic products in safety critical environments
Responsibility for keeping up to date with standards, as well as ensuring company design process and documentation also meet criteria
Being the point of contact for the company in relation to certification authorities
PCB Layout reviews, Design reviews and holding certification meetings
In order to be successful in this role of Product Compliance Engineer based in Manchester, you will have:
A background in quality or compliance involving electronics, and have prior knowledge of criteria to meet standards
Attention to detail and the ability to communicate effectively
The successful candidate will undertake some product training with this position. The company offers a great salary and benefits package, to include full 8% pension contribution. The client is unable to offer sponsorship so all applicants must have the right to work in the UK.
For further information on this Product Compliance Engineer role based in Manchester please contact Ricky Wilcocks 01582 878810 or rwilcocks@redlinegroup.Com.
....Read more...
A position for a Mechanical Engineer, specialising in Microelectronic Products, based in Milton Keynes, Buckinghamshire has become available, offering hybrid working plus a fantastic 9-day working fortnight!
The Mechanical Engineer - Microelectronic Products, based in Milton Keynes, Buckinghamshire will be responsible for the development of microelectronic products used in harsh environments. You will work closely across electronic design, reliability, manufacturing, process, test and quality departments to ensure that product packaging, materials, assembly methods and manufacturing processes meet customer requirements.
Ideal candidates for the Mechanical Engineer - Microelectronic Products job based in Milton Keynes, Buckinghamshire will experience in the following areas:
Practical experience performing thermal and stress analysis and interpreting results to inform engineering decisions.
Proficiency in SOLIDWORKS for 3D modelling and engineering drawings, and SOLIDWORKS Simulation for thermal and stress analysis, with a good understanding of dimensional tolerances and assembly requirements.
Good understanding of heat transfer, thermal expansion, material properties and their effects on product performance.
Experience with microelectronics, electronic packaging, hybrid assemblies, ceramic substrates, die attach or wire bonding.
Experience with finite element analysis for thermal stress, vibration or other mechanical loading.
Experience developing products for high-temperature or harsh-environment applications.
This is a fantastic opportunity for a Mechanical Engineer - Microelectronic Products to join a well R&D & Production team that will provide superb on-the-job training and opportunities for career progression.
To apply for this Mechanical Engineer - Microelectronic Products role in Milton Keynes, Buckinghamshire, please contact Tom Drew quoting ref. THD1427 on 01582 878848 or email TDrew@redlinegroup.Com. Otherwise, we welcome conversation regarding similar positions to Mechanical Engineering roles.....Read more...
We are partnered with a growing product development business in Newbury, Berkshire, designing and developing innovative electronic products for customers across a range of industries.
As part of their continued growth, they are looking for an experienced Audio Electronics Engineer to join their engineering team, working across the full product development lifecycle from initial concept and design through to prototyping, testing and production.
In this Audio Electronics Engineer role, you will:
Design and develop analogue and digital electronics, with a focus on audio applications
Take designs through schematic capture, PCB development, prototyping and testing
Carry out hardware debugging, fault finding and performance analysis
Work closely with other engineers to develop, test and improve products through to production
The ideal Audio Electronics Engineer will have:
Commercial, hands-on experience in electronics product development
Proven experience designing audio electronics, ideally including analogue signal paths, amplifiers, codecs or ADCs and DACs
Strong schematic and PCB design skills using Altium or similar
Experience with embedded systems, microcontrollers and digital communication interfaces
This is an excellent opportunity to join a growing engineering team working on a varied range of product development projects. You'll have the opportunity to take ownership of your designs, work across different stages of development and develop your technical skills alongside experienced engineers.
The role is site-based in Newbury, Berkshire.
If you're interested in this Audio Electronics Engineer role in Newbury, Berkshire, apply now or contact Ed at efrost@redlinegroup.Com or 01582 878819 for more information.....Read more...
