We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer.
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:
Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications
Training Outcome:
Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment Technician
Employer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic customers;Working Hours :Monday - Friday, 9.00am - 5.30pm) Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
During your apprenticeship you will:
Gain exposure on the project life cycle from start to finish. Such as getting involved in the design process, where we will teach you to use relevant systems such as CAD
Support undertaking a variety of civil engineering tasks for projects including treatment works, pumping stations and pipelines
Be supported to develop more technical skills, to assist Senior Engineers with report writing, evaluating risks and environmental impact
Help us to problem solve, creating sustainable solutions to support client’s needs
You will work closely with other disciplines within the project team such as mechanical and electrical engineers to ensure that the right solution is being delivered as projects progress.Training:Level 6 Civil Engineer (Degree) Apprenticeship Standard:
Our apprenticeships allow you to learn whilst you earn as you study for an academic qualification
You’ll get the chance to expand your knowledge by attending university where you will gain a BEng Civil Engineering degree
Training Outcome:Following on from this apprenticeship and completion of your end point assessment, you will progress into an appropriate junior civil engineering role.Employer Description:The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients’ vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today’s challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn’t exactly align, we encourage you to apply.Working Hours :Monday - Friday, 9.00am - 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
During your apprenticeship you will:
Gain exposure on the project life cycle from start to finish. Such as getting involved in the design process, where we will teach you to use relevant systems such as CAD
Support undertaking a variety of civil engineering tasks for projects including treatment works, pumping stations and pipelines
Be supported to develop more technical skills, to assist Senior Engineers with report writing, evaluating risks and environmental impact
Help us to problem solve, creating sustainable solutions to support client’s needs
You will work closely with other disciplines within the project team such as mechanical and electrical engineers to ensure that the right solution is being delivered as projects progress
Training:Level 6 Civil Engineer (Degree) Apprenticeship Standard:
Our apprenticeships allow you to learn whilst you earn as you study for an academic qualification
You’ll get the chance to expand your knowledge by attending university where you will gain a BEng Civil Engineering degree
Training Outcome:
Following on from this apprenticeship and completion of your end point assessment, you will progress into an appropriate junior civil engineering role
Employer Description:The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients’ vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today’s challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn’t exactly align, we encourage you to apply.Working Hours :Monday - Friday, 9.00am - 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
During your apprenticeship you will:
Gain exposure on the project life cycle from start to finish. Such as getting involved in the design process, where we will teach you to use relevant systems such as CAD
Support undertaking a variety of civil engineering tasks for projects including treatment works, pumping stations and pipelines
Be supported to develop more technical skills, to assist Senior Engineers with report writing, evaluating risks and environmental impact
Help us to problem solve, creating sustainable solutions to support client’s needs
You will work closely with other disciplines within the project team such as mechanical and electrical engineers to ensure that the right solution is being delivered as projects progress.Training:Level 6 Civil Engineer (Degree) Apprenticeship Standard:
Our apprenticeships allow you to learn whilst you earn as you study for an academic qualification
You’ll get the chance to expand your knowledge by attending university where you will gain a BEng Civil Engineering degree
Training Outcome:
Following on from this apprenticeship and completion of your end point assessment, you will progress into an appropriate junior civil engineering role
Employer Description:The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients’ vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today’s challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn’t exactly align, we encourage you to apply.Working Hours :Monday - Friday, 9.00am - 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
During your apprenticeship you will:
Gain exposure on the project life cycle from start to finish. Such as getting involved in the design process, where we will teach you to use relevant systems such as CAD
Support undertaking a variety of civil engineering tasks for projects including treatment works, pumping stations and pipelines
Be supported to develop more technical skills, to assist Senior Engineers with report writing, evaluating risks and environmental impact
Help us to problem solve, creating sustainable solutions to support client’s needs
You will work closely with other disciplines within the project team such as mechanical and electrical engineers to ensure that the right solution is being delivered as projects progress.Training:Level 6 Civil Engineer (Degree) Apprenticeship Standard:
Our apprenticeships allow you to learn whilst you earn as you study for an academic qualification
You’ll get the chance to expand your knowledge by attending university where you will gain a BEng Civil Engineering degree
Training Outcome:
Following on from this apprenticeship and completion of your end point assessment, you will progress into an appropriate junior civil engineering role
Employer Description:The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients’ vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today’s challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn’t exactly align, we encourage you to apply.Working Hours :Monday - Friday, 9.00am - 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
During your apprenticeship you will:
Gain exposure on the project life cycle from start to finish. Such as getting involved in the design process, where we will teach you to use relevant systems such as CAD
Support undertaking a variety of civil engineering tasks for projects including treatment works, pumping stations and pipelines
Be supported to develop more technical skills, to assist Senior Engineers with report writing, evaluating risks and environmental impact
Help us to problem solve, creating sustainable solutions to support client’s needs
You will work closely with other disciplines within the project team such as mechanical and electrical engineers to ensure that the right solution is being delivered as projects progress.Training:Level 6 Civil Engineer (Degree) Apprenticeship Standard:
Our apprenticeships allow you to learn whilst you earn as you study for an academic qualification
You’ll get the chance to expand your knowledge by attending university where you will gain a BEng Civil Engineering degree
Training Outcome:
Following on from this apprenticeship and completion of your end point assessment, you will progress into an appropriate junior civil engineering role
Employer Description:The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients’ vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today’s challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn’t exactly align, we encourage you to apply.Working Hours :Monday - Friday, 9.00am - 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
During your apprenticeship you will:
Gain exposure on the project life cycle from start to finish. Such as getting involved in the design process, where we will teach you to use relevant systems such as CAD
Support undertaking a variety of civil engineering tasks for projects including treatment works, pumping stations and pipelines
Be supported to develop more technical skills, to assist Senior Engineers with report writing, evaluating risks and environmental impact
Help us to problem solve, creating sustainable solutions to support client’s needs
You will work closely with other disciplines within the project team such as mechanical and electrical engineers to ensure that the right solution is being delivered as projects progress.Training:Level 6 Civil Engineer (Degree) Apprenticeship Standard:
Our apprenticeships allow you to learn whilst you earn as you study for an academic qualification
You’ll get the chance to expand your knowledge by attending university where you will gain a BEng Civil Engineering degree
Training Outcome:Following on from this apprenticeship and completion of your end point assessment, you will progress into an appropriate junior civil engineering role.Employer Description:The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients’ vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today’s challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn’t exactly align, we encourage you to apply.Working Hours :Monday - Friday, 9.00am - 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
During your apprenticeship you will:
Gain exposure on the project life cycle from start to finish. Such as getting involved in the design process, where we will teach you to use relevant systems such as CAD
Support undertaking a variety of civil engineering tasks for projects including treatment works, pumping stations and pipelines
Be supported to develop more technical skills, to assist Senior Engineers with report writing, evaluating risks and environmental impact
Help us to problem solve, creating sustainable solutions to support client’s needs
You will work closely with other disciplines within the project team such as mechanical and electrical engineers to ensure that the right solution is being delivered as projects progress.Training:Level 6 Civil Engineer (Degree) Apprenticeship Standard:
Our apprenticeships allow you to learn whilst you earn as you study for an academic qualification
You’ll get the chance to expand your knowledge by attending university where you will gain a BEng Civil Engineering degree
Training Outcome:
Following on from this apprenticeship and completion of your end point assessment, you will progress into an appropriate junior civil engineering role
Employer Description:The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients’ vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today’s challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn’t exactly align, we encourage you to apply.Working Hours :Monday - Friday, 9.00am - 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Main responsibilities:
Answering calls for the service department.
Logging, recording, and managing calls outs including those that require access booking.
Monitoring and managing jobs on the internal systems to ensure they are issued to engineers or subcontractors.
Despatching customer calls to engineers and contractors.
Booking access with customers for engineer visits.
Raising purchase orders to contractors for call outs or suppliers for equipment.
Managing the engineers’ diaries and daily route planning.
Receive engineer requests for training, tools, etc., and pass them on to the relevant supervisor.
Managing and booking PPM’s (planned preventative maintenance).
Creating and issuing of O&M documentation.
Reporting on logged jobs, and engineer visits attended.
Run, populate & manage reports for the maintenance division within AIS.
Attend office or onsite meetings if required.
Assisting with engineer/operatives timesheets.
Typing and recording of invoices/payment applications.
General administration duties that may also be required, i.e., scanning/filing or any reasonable request by manage mentor directors.
Areas of responsibility/accountability:
Liaise with other departments within the business to help ensure the smooth and efficient passage of high-quality information and data.
To help maintain (and improve) all of the company's procedures in accordance with the Health & Safety, Quality Management and Operational Systems.
Meet company KPIs.
Training:
Business Administrator Level 3 programme
End Point Assessment
Work based Training
Training Outcome:A chance to become a permanent member of the team on successful completion of apprenticeship.Employer Description:In 2003 Access International Security Ltd (AIS), began its story in London and focused originally on providing commercial security systems. Listening to our customers needs, this in time expanded to incorporate electrical / mechanical fit out services too, for all types and sizes of units.
Today AIS continues its story of development with the addition of new services such as aftercare maintenance packages (SECLEC) as well as home automation and audio visual services.
Over the last two decades, AIS has established itself as a successful service partner supporting our customers in ever expanding project complexity and size. The AIS team take great pride in their industry knowledge and expertise, as a result they are confident in providing excellence in every aspect; from costing a design to suit your budget, through to the delivery and aftercare service.
Having our own dedicated teams on site for the duration of a project allows AIS to have a high degree of control over site factors such as project management and quality control. This means that there is no over-complication as to when certain contractors have to be on site to fit in with the timeline. We have it all at hand.Working Hours :Monday – Friday 8am – 4.45pm, with 45 mins for lunch.Skills: Communication skills,IT skills,Organisation skills,Team working,Hard working,Bubbly personality,Outgoing personality....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer.
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and, depending on performance and availability, progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
The Recipe
Our Engineering Apprenticeship will take you on a journey of learning and development over the next 4 years, we will take care of your tuition fees as well as paying you for your hard work. There's no reason to worry about student debt, we've got your bread & butter sorted, all we knead is for you to use your loaf and apply!
As ‘the UK’s No. 1 Bakery Brand’ we have been baking bread since 1876. Today, we are proudly a fifth-generation family, with the introduction of the sixth generation, supplying over 18,000 retail customers from 11 bakeries and 16 depots, producing a range of over 70 products including gluten and wheat free. Family and values are what makes us different, and we are a proud bunch, join us and you too could be proud to be Warburtons.
The Apprenticeship programme gives YOU the development and skill set you need for us to shape our future together.
The Role
The Apprenticeship provides the knowledge, skills and experience needed for the role of a Design Engineer.
Once qualified you’ll support our Project Engineers and site teams with machine assembly and overall production line factory design, considering H&S, regulatory and legal requirements and process flow ergonomics.
Typical things you can expect are:
You’ll take on a real role with real responsibility and undertake challenging placements around the business.
A structured 4-year Apprenticeship Programme with a lead into a permanent position
Varied learning through a mixture of on-the-job training with your own Warburtons mentor and working with our training provider (MGTS)
An apprenticeship that equips you to become a Design Engineer
A varied programme that involves, electrical, mechanical, maintenance and Design engineering
Extra Dough
Last, but by no means yeast, you’ll want to know what your breads worth
A recognised development path and qualification to kick-start your career
£21,500 starting salary rising each year of your Apprenticeship
Family time is important to us, so we’ll start you on 25 days paid holiday per year
Life assurance
New starter goodie box to welcome you to the family
Being part of a national team of Apprentices, supporting each other
A dedicated mentor throughout your Apprenticeship
Continued development & 121 training designed especially for you
Working on sites with state-of-the-art technology, automation and new product development
Site social events, charity days and wellbeing initiatives
Award winning contributory pension scheme
Discounted Gym Membership
Retail Vouchers & online shopping offers including Warburtons discounted products
Support for your health and wellbeing, including, 24/7 access to a confidential helpline for practical advice and a comprehensive occupational health service
If you’re looking to kick-start your career within a supportive, Industry leading family business that puts our people at the heart of it, then the journey starts here.
Key Dates
December 2024 applications will close - to avoid disappointment, we strongly advise you to apply now!
Early January 2025 successful candidates will be notified by email.
We will aim to hold selection Events during February 2025.
If successful, you will receive your offer of employment in March / April 2025
Employment will commence mid to late August 2025
Training:
Level 2 Diploma in Advanced Manufacturing Engineering (Foundation Competence)
BTEC Level 3 Diploma in Advanced Manufacturing Engineering (Development Knowledge)
Level 3 Diploma in Advanced Manufacturing Engineering (Development Competence)
Training Outcome:At the end of your Apprenticeship, you'll have achieved your BTEC Level 3 Diploma in Advanced Manufacturing Engineering. This route is just the start of your career and can open the door to many more opportunities.Employer Description:Warburton's is the largest family-owned bakery business in the country, and employs around 4,500 people across 12 bakeries and 14 depots across the UK.
Now Recognised as Britain's favourite bakery brand, Warburton's has doubled in size in the last decade alone to become a £500 million-a-year business. This means that more ethan a quarter of all bakery products consumed in the UK is produced by Warburton's.Working Hours :Mon - Thurs 8:00 - 4:00, Fri 8:00 - 12:00 whilst at the training provider.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Team working,Number skills,Logical....Read more...
As a Safety, Health & Environment (SHE) apprentice you will have access to all areas of the site from boat build to design offices, interacting with all levels of the business from the shop floor to directors and external regulators.
As a SHE apprentice you will be:
Supporting our workforce in order to influence and improve working practices and working conditions across the site, gaining a good understanding of the product and build processes working in the operational build areas
Working with subject matter experts and experienced professionals to understand the legal requirements we have as a business, and how to apply this in reality to ensure our workforce are protected and we are legally compliant as a business
You will have a direct impact on the safety and health of our people and the effect we have on the environment around us, you will be supporting improvement projects, educational communications campaigns and working to influence behavioural change
At completion of the apprenticeship you will obtain a Safety, Health & Environment Level 3 qualification.Training:Maritime Electrical Fitter Level 3.
An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.Training Outcome:Approximately 95% of apprentices choose to stay on with us. As a global business there are a world of opportunities - whether you decide to stay in the UK, or explore an overseas role.Employer Description:At BAE Systems, we provide some of the world’s most advanced, technology-led defence, aerospace and security solutions. We employ a skilled workforce of more than 93,000 people in around 40 countries. Working with customers and local partners, we develop, engineer, manufacture, and support products and systems to deliver military capability, protect national security, and keep critical information and infrastructure secure.Working Hours :Shifts to be confirmed.Skills: Communication skills,Organisation skills,Team working....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Engineer's role is viewed as an extension of management. Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture. The Engineer is expected to spend a significant amount of time on the floor.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Safety Assume a leadership position at the facility in partnership with the shift supervisors. Activities include resolution and communication regarding safety issues. Execute on scheduled PHA's and JSA's. Proactively monitor area and remediate potential safety issues. Use DAKOTA software as a tool for compliance and environmental, health and safety. Use the tool to report incidents, near misses, and non-conformances.
LEAN Culture Develop and execute upon "standard work" activities. Assume responsibility for assigned activities on the Engineering Tier and other accountability boards. Conduct "GEMBA Walks" daily. Use walks as the primary means of education and communication of expectations. Improve productivity through elimination of non-value-added activities. Apply Engineering principles and methodologies to Improve productivity and eliminate waste.
Product Quality Work to maximize equipment efficiency and quality for output. Member of the facility QIC. Ensure identification of root cause and subsequent prevention of future customer complaints. Assist in the training of operators with a focus on quality critical product specifications and process parameters. Capable of equipment troubleshooting and process design.
EDUCATION:
Bachelor's degree from four or 5-year college or university. B.S. in Mechanical, Chemical, Electrical or Controls Engineering.
EXPERIENCE:
Six months to one year related experience and/or training. Bachelor's Degree (B.S.) in Chemical Engineering, Mechanical Engineering, Electrical or Controls Engineering from an ABET Accredited university. Relevant experience from internship is acceptable for experience. CERTIFICATES, LICENSES, REGISTRATIONS: Six Sigma Green Belt is a plus. OTHER SKILLS AND ABILITIES:
Understanding process variance and the resultant effects on Quality. Knowledge of applied statistics. Ability to perform problem analysis utilizing problem-solving methodology. BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online!....Read more...
Years 1 and 2:
During your first year you will spend time at college completing a Level 2 Diploma in Advanced Manufacturing Engineering, the foundation qualification of your apprenticeship.
Upon completion, you will return to Leonardo to start your rotational placements within some of the following departments:
Electronics Engineering, Systems Engineering, Mechanical Engineering, Operations and other engineering support functions.
During your second year you will attend college on a day release basis to complete a Level 3 Diploma in Advanced Manufacturing Engineering, the knowledge qualification of your apprenticeship and continue with your rotational placements.
Years 3 and 4:
In your 3rd year you will continue to rotate around different departments, gaining further knowledge of the company and developing your engineering skills. Your 3rd year will also see you through the workplace portfolio phase of your level 3 Diploma in Advanced Manufacturing Engineering, the competence qualification of your apprenticeship. For your final year you will specialise in your chosen area, based on your experience throughout your rotational placements you will also complete the End Point Assessment for your apprenticeship in Engineering Technical Support (Apprenticeship Standard Ref: ST0457).
During your apprenticeship, you will:
Grow your knowledge of an engineering business and what the role of a technician is by being part of an integrated Project Team
Develop practical skills in engineering and understanding key processes and technologies
Support early careers activities - our apprentices have the opportunity to work as STEM ambassadors in schools, colleges and universities
Training:Based at Bedford College, this four-year apprenticeship provides a wealth of hands-on learning and development opportunities including a BTEC Level 2 & 3 Diploma in Advanced Manufacturing Engineering along with a Level 3 Diploma in Advanced Manufacturing Engineering - Technical Support Technician.
Working with world-leading specialists, you will increase your technical skills and capability and develop your academic and practical understanding of the engineering design lifecycle by deploying the methods of designing electrical and mechanical systems.
You will undertake a series of three-month placements - covering Mechanical, Electronic, Systems, Software and Quality Engineer - that will train you in the design and development of industry-leading radar and laser systems. Other placements will be laboratory-based, testing and developing cutting-edge PCB assemblies.Training Outcome:This is a great opportunity to bring your talents and form an integral part of Leonardo’s future. We can help you develop your skills and offer great opportunities to develop and grow, so why not join us.Employer Description:Leonardo is an international leader in electronic and information technologies for defence systems, aerospace, data, infrastructures, land security and protection, and sustainable ’smart’ solutions. We are a continually expanding company, offering exciting opportunities to talented individuals who want to work at the forefront of technology.Working Hours :Monday- Friday, 37 hours per week with some time in college. Exact shifts to be confirmed.Skills: Communication skills,Attention to detail....Read more...
Engineering Degree Apprenticeship, you will specialise in one of a broad range of disciplines. Engineers are responsible for exciting and varied work such as:
• Development & qualification of submarine structures, systems and equipment.• Writing technical specifications• Design and test activities• Detailed requirements planning and performance analysis• Generation of test procedures and reviewing of evidence
For 2025, the following engineering disciplines are available.
Structural - As a Structural engineer you will play a critical role in ensuring the vessel integrity at all limits as well as making sure that the vessel can safely accommodate its crew, cargo and armament and arrive home safely. This involves various key responsibilities such as conducting linear and non-linear finite element analysis to evaluate the structural integrity of the submarines, assessing hydrostatic collapse strength, and designing secondary structures.
Mechanical - In the Mechanical domain you will be part of one of the largest teams of mechanical discipline engineers, which also covers propulsion system, with a variety of areas to get involved in. They cover mechanical systems across the entire product life-cycle.
Research & Technology - In the Technology Management team you would be part of a team of multi-disciplined personnel, responsible for authoring the Submarines Technology Strategy, developing technology roadmaps and planning to realise that strategy, and managing the portfolio management of the R&D projects that deliver those roadmaps.
Materials - In the Materials Technology Team you would become part of a dedicated group of expert metallurgists, welding engineers, and non-metallic material specialists with extensive qualifications and experience. Operating within the materials technology centre, this team establishes material strategies and policies that govern all submarine-related activities while addressing materials challenges across various programs and related business sectors.
Systems - Submarines are intricate systems, posing significant challenges in their design, construction, testing, maintenance, and support. In order to protect the nation, you will be part of a team that aims to tackle these difficulties head on. Systems Engineers play a vital role by dissecting projects into manageable components, facilitating comprehension and implementation at all levels. By investing time upfront to grasp the project's intricacies and requirements, Systems Engineers utilise diverse methodologies and models to foster a shared understanding and successful project execution.
PMS C&I / AVC / SIF / ICPDS - The field of Electrical Engineering encompasses two distinct areas: Internal Communications and Platform Data Systems (ICPDS) and Control and Instrumentation (C&I). In the realm of ICPDS, you will focus on resolving technical challenges related to wire-free communications, digital/IP telephony, POTS, visual surveillance, distributed media systems, broadcast audio, and fibre optics.
Human Factors - The Human Systems Integration Cluster deliver a unique capability comprising of three specialisms: Human Factors, Operability (provision of Submarine Operational Experience) and Training. Your role within this cluster is crucial in ensuring the safety, operability, and habitability of products, systems, processes, environments, and facilities.
PNED - In the Platform Nuclear Engineering Department (PNED) you would be responsible for ensuring the nuclear reactor is safely designed, built and tested, providing the power the submarine needs to protect the nation.Training:An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.Training Outcome:Approximately 95% of apprentices choose to stay on with us. As a global business there are a world of opportunities – whether you decide to stay in the UK, or explore an overseas role.Employer Description:At BAE Systems, we provide some of the world’s most advanced, technology-led defence, aerospace and security solutions. We employ a skilled workforce of more than 93,000 people in around 40 countries. Working with customers and local partners, we develop, engineer, manufacture, and support products and systems to deliver military capability, protect national security, and keep critical information and infrastructure secure.Working Hours :Shifts to be confirmed.Skills: Communication skills,Organisation skills,Team working....Read more...
JOB DESCRIPTION
DAP is looking to hire Process Engineer for our Baltimore Plant.
Responsibilities
Provide process engineering support for raw materials, compounding, production, and packaging functions to improve safety, and support the MS 168 continuous improvement process.
Production Support
Support daily production needs through process troubleshooting, experimentation and support for production requirements.
Continuous Improvement
Lead continuous improvement projects to reduce cost, increase material utilization, improve first time right, integrate new products/processes into production and reduce variation. Implement necessary changes and update all documentation (including drawings and SOP's) accordingly
Capital Plan
Coordinates with plant engineer to oversee capital projects necessary for the continued improvement and modernization of the plant. Ensure completion of projects within budgets.
Safety
Responsible for achieving and maintaining safety goals relative to the maintenance and engineering functions. Responsible for safety devices, safe design, etc. of all equipment. Administer process hazard analyses (PHA's) for identified materials, processes, and RHP Compliance
MS 168
Support the tier meeting process by the implementation and analysis of data collection and visual management systems.
Environmental Program reporting
Support the site's environmental program by assisting with reporting, compliance monitoring, and QA results in support of process engineering improvements.
Requirements:
Bachelor's degree in mechanical, Electrical, or Industrial engineering 2+ years' experience in manufacturing environment. Six Sigma/lean manufacturing experience. Understanding of process control methods, flowmeters, level monitors, and other process controls within a batch manufacturing process. Ability to read and interpret process drawings (process flow diagrams and P&ID's). PLC with ladder logic analysis. Strong analytical and troubleshooting skills. PC usage with MS Office Suite (AutoCAD experience a plus), strong interpersonal skills, good communication skills both written and verbal.
Benefits:
Medical, Dental and Vision Insurance Company Provided Life Insurance Paid Time Off (PTO) Company-paid short-term and long-term disability 401(k) plans Employer-funded pension plan Tuition Reimbursement
Pay Range
75,000 to 90,000 per year.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products. DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores. DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers. Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online!....Read more...
Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. We’re always looking for new talent to take the next step with us and for bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative but work well within a team.
The role
As a Senior Marine Operations Engineer, you will be involved in all aspects of marine surveys to include Metocean field engineering activities. The engineer will be the lead person managing the deployment and recovery of Metocean equipment, both moorings and subsea components while also acting as the offshore client liaison.
The role of a Senior Marine Operations Engineer is varied and offers the opportunity to work on projects for offshore wind farms, renewable energy, and oil & gas. This position will suit experienced an aspiring party chief from a similar background, geophysical or seismic surveys who is looking for a more varied career. The projects range from one or two days to longer trips of up to four weeks with the potential to work all over the world. Our engineers are involved in a mixture of offshore and coastal vessels, drilling platforms and onshore installations. As no two projects are the same, you will need to be resourceful and flexible and enjoy working in a fast-paced and challenging environment. Additionally, you will also be asked to add your experience to project planning. This role can be based out of our Wallingford, Oxfordshire office and Portchester, Hampshire office. This may also be an offshore role based on fixed number of days offshore for the right candidate.
Who we’re looking for:
Essential
It is essential that you have previous experience in a similar role (deck operations on a vessel).
Previous offshore experience on a variety of projects (or similar type work) and willing to work offshore for approximately 2 to 3 weeks at a time, within UK, Europe and Africa.
Experience deployment of marine monitoring instrumentation equipment (or similar) and proficient in the setup and operation of commonly used sensors (training will be provided).
Knowledge and understanding of lift plans.
Good at problem solving, enjoy tackling technical challenges.
The ability to work to strict deadlines within short notice changes.
A systematic and methodical approach with a fine attention to detail.
Excellent communication and language skills in English (reading, written and spoken).
Full driving licence.
Experience of Managing small teams
Experience of acting as a client liaison
Desirable
BSc degree or above in oceanography, science, instrumentation, engineering, electrical or mechanical.
Understand the principles of real-time data, data acquisition and data QC and are proficient in the use of software.
Formal LOLER qualification
What we offer:
Fugro provides a positive work environment as well as projects that will satisfy the most curious minds. We also offer great opportunities to stretch and develop yourself. By giving you the freedom to grow faster, we think you’ll be able to do what you do best, better. Which should help us to find fresh ways to get to know the earth better. We encourage you to be yourself at Fugro. So bring your energy and enthusiasm, your keen eye and can-do attitude. But bring your questions and opinions too. Because to be the world’s leading Geo-data specialist, we need the strength in depth that comes from a diverse, driven team.
Benefits for this role include a competitive salary accompanied by an attractive package including contributory pension scheme, life assurance and private medical insurance.
Discount and benefit portal
Option to lease an electric car.
24 days annual leave plus Bank Holidays.
Option to buy or sell up to 5 days annual leave.
Subsidised canteen in Wallingford
Free parking.
Cycle to work scheme.
Our view on diversity, equity, and inclusion
At Fugro, our people are our superpower. Their variety of viewpoints, experiences, knowledge and talents give us collective strength. Distinctive beliefs and diverse backgrounds are therefore welcome, but discrimination, harassment, inappropriate behaviour and unfair treatment are not. Everybody is to be well-supported and treated fairly. And everyone must be valued and have their voice heard. Crucially, we believe that getting this right brings a sense of belonging, of safety and acceptance, that makes us feel more connected to Fugro’s purpose ‘together create a safe and liveable world’ – and to each other.
#LI-JM1Apply for this ad Online!....Read more...
