The Test Engineer will join a Systems Engineering team critical in space thruster engine development. You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components. This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop. Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc. Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integrat....Read more...
Our Cavendish Nuclear business supports customers to deliver a future where nuclear is a key part of the energy solution. By joining our Electrical, Control and Instrumentation Engineering Accelerated Degree Apprenticeship, you’ll be part of a team at the forefront of developing advanced technologies that make the world safer and more secure.
As an apprentice, you’ll contribute to a variety of projects involving electrical, control, and instrumentation design, from conceptual stages to manufacturing readiness. Learning from experienced colleagues, you'll have the opportunity to rotate through departments to contribute to important projects. Through this fast-tracked programme, you will:
Develop expertise in electrical engineering, including the creation of drawings, calculations, specifications, schedules, and technical reports.
Produce technical documentation to support the design and development of nuclear engineering solutions.
Evaluate designs for potential risks and hazards, focusing on nuclear and radiological safety.
Contribute to projects across the entire design and engineering lifecycle, from early concept development to detailed design and manufacturing preparation.
Gain hands-on experience with industry-leading design tools such as AutoCAD, Revit, and Navisworks for 3D designs and visualisation.
Receive expert training in Electrical Safety and BS7671 (IET Electrical Wiring Regulations).
Your work will be integral to vital projects advancing the UK’s nuclear clean-up efforts. This includes decommissioning outdated facilities to safeguard the environment and refurbishing laboratories and nuclear waste plants to ensure safety and efficiency. Each project contributes to the safe clean-up of the UK’s nuclear legacy and helps create a world where nuclear plays a key contribution in protecting our nation, ensuring security of energy supply and meeting our net zero commitments.
Training:
You will undertake the Product Design and Development Engineer (Degree) Apprenticeship, delivered through a blended learning model that combines in-person and online teaching. Each semester begins with a three-day block of face-to-face delivery, followed by weekly online sessions throughout the term. This structure is designed to support both academic learning and practical application.
The programme is tailored for engineers involved in product development and integrates key disciplines such as materials science, computer-aided design (CAD), systems integration, and prototyping. It focuses on equipping learners to create fit-for-purpose solutions in regulated environments.
Upon successful completion, you will be awarded a BEng (Hons) degree, accredited by an Engineering Council licensed Professional Engineering Institution, alongside a Level 6 Degree Apprenticeship qualification.
Training Outcome:
At the end of the programme, you will have acquired the skills and experience to move into an Electrical, Control & Instrumentation (EC&I) Engineering role within Cavendish Nuclear
You’ll also have the opportunity to build on your progress toward professional registration as an Incorporated or Chartered Engineer, a recognised benchmark of engineering competence, which can support your journey into more advanced roles, such as Senior Engineer.
As a global organisation, Babcock provides countless opportunities to enhance your skills and advance your career. To support your growth, we’ve introduced the Babcock Role Framework, which outlines roles, career pathways, and development opportunities. With every job mapped to these frameworks, you’ll have a transparent view of the steps needed to reach Senior Engineer and beyond.
Employer Description:Babcock is an international defence company providing support and product solutions to enhance our customers’ defence capabilities and critical assets.
We provide through-life technical and engineering support for our customers’ assets, delivering improvements in performance, availability and programme cost. Our c27,700 employees deliver these critical services to defence and civil customers, including engineering support to naval, land, air and nuclear operations, frontline support, specialist training and asset management.
We also design and manufacture a range of defence and civil specialist equipment, from naval ship and weapons handling systems to liquid gas handling systems. We also provide integrated, technology-enabled solutions to our defence customers in areas such as secure communications, electronic warfare and air defence.Working Hours :Monday to Friday 9am to 5pm.Skills: IT skills....Read more...
Building Maintenance Engineer
M25
£40,000 - £45,000 basic + 5% bonus + overtime available every weekend OTE £60K + call out rota + van + fuel card + uniform + comms unit + social events + annual leave + pension
Are you a building maintenance engineer looking to work in a well established company who can offer constant overtime opportunities? Work for a client base in the heart of london delivering maintenance and repairs services. Long term you’ll benefit from bonus schemes and constant opportunities to increase your earnings.
This is a design and build company that offers a 360 service to their clients and are constantly growing their maintenance divisions' work load. Become a respected and recognised building service maintenance engineer, get to know their clients and deliver a fantastic service reaping the financial rewards.
The role of the building maintenance engineer will involve:*Carrying out plumbing repairs, PPM’s and other general maintenance works such as fire alarm testing, light electrical maintenance and more
*Travel inside the M25 visiting clients to carry out scheduled checks and ensuring reports are up to date
*Be on a call out rota of a minimum of 1 in 4
The successful building maintenance engineer will need:
*NVQ Level 2 in plumbing or Electrical
*Basic skills in electrical works and other hard and soft services within building service environments
*Driving licence
For immediate consideration please call Eran on 07458163044 and click to apply!
Keywords: building maintenance engineer, multi trader, plumber, plumbing, building services, maintenance, repairs, ppms, fse, field service engineer, multitrade, electrical. Handy man, wimbledon, hammersmith, ealing, camden town, finsbury park, enfield, stratford, barking, woolwich, greenwich, london, central london, city of london
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. ....Read more...
Senior Power Electronics Engineer – Battery Chargers
Are you a Senior Power Electronics Engineer with strong experience in high-power design, looking to work on innovative battery charging systems?
Our client, a global leader in green energy tech, is expanding their specialist R&D team in Glasgow, Scotland. This is a hybrid role with a clear path to senior level and the chance to shape next-gen power solutions across sectors like robotics, defence, and industrial systems.
Key Responsibilities for this Senior Power Electronics Engineer job are:
Design and develop single/three-phase high-power battery chargers for industrial use.
AC to DC power conversion for smart energy and automation systems.
Work with semiconductors, magnetics, and control theory to create efficient, robust design.
Use lab tools (oscilloscopes, dataloggers, CAD, MRP) for prototyping and testing.
Requirements for this Senior Power Electronics Engineer job are:
Senior level experience in power electronics design and control.
Expertise in LLC, phase-shift converters, active PFC, and high-power topologies.
Hands-on lab and simulation experience.
Industry background in defence, data centres, rail, or traction is a plus.
Degree in Electrical/Electronic Engineering or similar.
To apply for this Senior Power Electronics Engineer role, please send your CV to NDrain@redlinegroup.Com or call 01582 878828 / 07487 756328.....Read more...
Senior Electronics Design Engineer – Mixed Signal
An exciting opportunity has arisen for a Senior Electronics Engineer to join a Cambourne, Cambridgeshire based market-leading manufacturer of specialist fire detection systems. Their innovative products are trusted globally in high-stakes environments such as museums, warehouses, theatres, and even commercial aviation.
As a Senior Electronics Design Engineer, you will play a pivotal role in leading and mentoring a team of talented engineers. You’ll bring technical expertise, strategic insight, and a passion for delivering exceptional electronic designs that make a tangible difference in the real world.
Key Responsibilities of this Cambourne, Cambridgeshire based Senior Electronics Design Engineer job:
Lead the design and development of complex analogue and digital electronic circuits, including schematic capture, component selection, and design reviews.
Provide hands-on technical leadership throughout the entire electronics product lifecycle — from concept, feasibility, and design, through to prototyping, testing, certification (including ATEX), and production handover.
Ensure robust designs suitable for high-reliability and safety-critical applications, including high-risk and ATEX-certified environments.
Plan, manage, and oversee project delivery, ensuring alignment with technical and commercial objectives.
Skills & Experience Required for this Senior Electronics Design Engineer job:
Proven experience in analogue and digital circuit design, including schematic capture and verification using tools like Altium 365
Strong senior-level background with project ownership, team leadership, and mentoring responsibilities.
Industry experience with regulated or high-risk products ideally including ATEX or other safety-critical standards
Degree-qualified in Electronics, Electrical Engineering, or a closely related discipline
This is a fantastic opportunity to join a forward-thinking Cambourne, Cambridgeshire based business that values innovation, continuous improvement, and the development of its people—all while delivering life-saving technology.....Read more...
Junior Applications Engineer
Liverpool
£30,000 - £40,000 Basic + Training & Development + WFH optional + Progression + Holidays + Travel Paid + Package + MORE!
Upgrade your career with one of the UK’s biggest companies in their industry where you will have the opportunity to work on large projects as well as receive ongoing training and development. As Junior Applications Engineer you’ll be undertaking electrical and mechanical design reviews for various projects, and you’ll benefit from having the opportunity to progress rapidly in a growing company.
As well as on shore this company operates off shore in the manufacturing industry in the UK and is currently looking to expand further their reach globally. Due to their consistent growth, they require a Junior Application Engineer to come and join their crucial team, helping to add value to their projects. Apply now and solidify a career where you will be offered continuous hands on training and progression.
Your Role As Junior Application Engineer Will Include:
* Ensuring technical reviews are undertaken for assigned opportunities * Working closely with project managers on various projects * Visiting client sites across the UK The Successful Junior Application Engineer Will Have:
* Understanding of Switchgear / OR education * Electrical engineering background * Willing to visit sites across the UK * Commutable to Liverpool For immediate consideration please call Matthew on 07458163042 or click to apply
Keywords: Junior Applications Engineer, Switchgear engineer, Electrical, project manager, Field service, Trainee, Electro mechanical, commercial, Liverpool, Merseyside, Warrington, Chester, Birkenhead, Wrexham....Read more...
The Test Engineer will join a Systems Engineering team critical in space thruster engine development. You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components. This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop. Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc. Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integration, Manufacturing and Inspection Flow Charts.
Review, interpret, manage and own the spacecraft requirements then disseminate down to relevant engine subsystem or component teams.
Coordinate of top level Design, Verification and Compliance Matrix.
Internally digest key subsystem and component review documentation ensuring work is completed to required standards and all aspects of the engine system are correctly aligned.
Lead customer interactions and engine level reviews also manage supplier technical queries in conjunction with the appropriate resource.....Read more...
Electronic Test and Production Engineer
Location: Horsham
Salary: £34,000 - £37,000 per annum (DOE)
Working Hours: 37.5 hours/week - with early finish on Fridays
An exciting opportunity is available for a Electronic Test and Production Engineer to join our clients advanced manufacturing team. This role focuses on the design and development of test equipment, supporting in-process testing, creating test plans, and providing technical support to optimise production processes and resolve technical issues.
Key Responsibilities
- Serve as a technical bridge between Engineering and Production, improving build quality and minimising rework through effective in-process testing
- Deliver electrical and test support to address production issues and reduce delays
- Design and develop test rigs, fixtures, and equipment, supporting their selection and procurement
- Develop and coordinate robust test plans/procedures to ensure products meet customer and regulatory requirements
- Contribute to process improvement and continuous improvement initiatives across production operations
- Perform fault finding on electromechanical equipment, identify root causes, and implement resolutions
- Support quality functions with inspection and investigation activities
- Assist with budget preparation and expense monitoring
- Facilitate staff training and knowledge transfer within production teams
- Occasional travel for customer support, troubleshooting, and issue resolution
- Maintain strict adherence to health & safety and quality regulations
Requirements Essential
- At least 5 years experience in an engineering/test environment or equivalent qualification (BTEC/City & Guilds level 2+)
- Strong technical expertise in testing electrical/electromechanical products
- Competence in reading wiring diagrams and PCB schematics
- Excellent IT skills and effective communication, both written and verbal
Desirable
- Experience mentoring, supervising, or leading staff
- Knowledge of LabVIEW, PLC programming, and CAD design tools
- Familiarity with digital camera and video protocols
Benefits: A comprehensive benefits package is available to support your wellbeing, professional development, and work-life balance.
Security Clearance: Applicants must be eligible for UK Security Clearance, requiring UK residency for at least five years, identity verification, and employment history checks.....Read more...
In this varied role, you’ll join one of our engineering teams working across either our Civil Decommissioning or Defence business streams. From designing control systems to developing Computer Aided Design (CAD) models and performing electrical load calculations, every task helps ensure the safety and sustainability of nuclear infrastructure.
You’ll support the full design lifecycle: from initial concept through to detailed design and design for manufacture. Typical tasks may include producing technical documentation, assessing designs for risk and safety, and learning to work with standards and regulations that apply across the industry.
As part of your development, you’ll take part in internal training that broadens your knowledge beyond your core role. This includes radiological shielding, risk assessment and nuclear appreciation modules – all designed to give you a well-rounded understanding of how we create a safe and secure world.
Training:
You will study towards the Product Design and Development Engineer (Degree) Apprenticeship standard through the University of Lancashire.
Your training will be delivered through a blended learning model that combines in-person and online teaching. Each semester begins with a three-day block of face-to-face delivery, followed by weekly online sessions throughout the term. This structure is designed to support both academic learning and practical application.
The programme is tailored for engineers involved in product development and integrates key disciplines such as materials science, Computer Aided Design (CAD), systems integration, and prototyping. It focuses on equipping learners to create fit-for-purpose solutions in regulated environments.
Upon successful completion, you will be awarded a BEng (Hons) in Professional Engineering (Product Design) and a Level 6 Degree Apprenticeship qualification.
Training Outcome:
By the end of your apprenticeship, you’ll be ready to take on the role of Electrical, Control and Instrumentation Engineer at Cavendish Nuclear, with a competitive salary exceeding £43,000.
You’ll also have the opportunity to build on your progress toward professional registration as an Incorporated or Chartered Engineer, a recognised benchmark of engineering competence, which can support your journey into more advanced roles, such as Senior Engineer.
As a global organisation, Babcock provides countless opportunities to enhance your skills and advance your career. To support your growth, we’ve introduced the Babcock Role Framework, which outlines roles, career pathways, and development opportunities. With every job mapped to these frameworks, you’ll have a transparent view of the steps needed to reach Senior Engineer and beyond.
Employer Description:Babcock is an international defence company providing support and product solutions to enhance our customers’ defence capabilities and critical assets.
We provide through-life technical and engineering support for our customers’ assets, delivering improvements in performance, availability and programme cost. Our c27,700 employees deliver these critical services to defence and civil customers, including engineering support to naval, land, air and nuclear operations, frontline support, specialist training and asset management.
We also design and manufacture a range of defence and civil specialist equipment, from naval ship and weapons handling systems to liquid gas handling systems. We also provide integrated, technology-enabled solutions to our defence customers in areas such as secure communications, electronic warfare and air defence.Working Hours :Monday to Friday 9am to 5pm.Skills: IT skills....Read more...
As part of our Cavendish Nuclear business, you'll be at the forefront of the UK’s nuclear decommissioning mission. From your base at Fleswick Court in Cumbria, you’ll support key projects at Sellafield, helping to develop innovative solutions that safely dismantle and clean up some of the country’s oldest nuclear facilities.
You’ll begin by shadowing experienced engineers and building a strong foundation in design, modelling, calculations and documentation. As you grow in confidence and skill, you’ll take on more complex tasks, supporting the full design lifecycle and gaining valuable exposure to engineering tools such as Autodesk REVIT or AutoCAD Electrical.
What makes this programme special is the sense of purpose. Every drawing, design or calculation you contribute to plays a part in protecting people and the environment. And you won’t be doing it alone – you’ll be surrounded by passionate colleagues who are there to mentor and support you.
Training:
You will study towards the Product Design and Development Engineer (Degree) Apprenticeship standard through the University of Lancashire.
Your training will be delivered through a blended learning model that combines in-person and online teaching. Each semester begins with a three-day block of face-to-face delivery, followed by weekly online sessions throughout the term. This structure is designed to support both academic learning and practical application.
The programme is tailored for engineers involved in product development and integrates key disciplines such as materials science, computer-aided design (CAD), systems integration, and prototyping. It focuses on equipping learners to create fit-for-purpose solutions in regulated environments.
Upon successful completion, you will be awarded a BEng (Hons) in Professional Engineering (Product Design) and a Level 6 Degree Apprenticeship qualification.
Training Outcome:
By the end of the programme, you will have earned your degree and gained the skills, experience and knowledge to thrive as an Electrical, Control and Instrumentation Engineer at Cavendish Nuclear – with a competitive salary above £43,000.
You’ll also have the opportunity to build on your progress toward professional registration as an Incorporated or Chartered Engineer, a recognised benchmark of engineering competence, which can support your journey into more advanced roles, such as Senior Engineer.
As a global organisation, Babcock provides countless opportunities to enhance your skills and advance your career. To support your growth, we’ve introduced the Babcock Role Framework, which outlines roles, career pathways, and development opportunities. With every job mapped to these frameworks, you’ll have a transparent view of the steps needed to reach Senior Engineer and beyond.
Employer Description:Babcock is an international defence company providing support and product solutions to enhance our customers’ defence capabilities and critical assets.
We provide through-life technical and engineering support for our customers’ assets, delivering improvements in performance, availability and programme cost. Our c27,700 employees deliver these critical services to defence and civil customers, including engineering support to naval, land, air and nuclear operations, frontline support, specialist training and asset management.
We also design and manufacture a range of defence and civil specialist equipment, from naval ship and weapons handling systems to liquid gas handling systems. We also provide integrated, technology-enabled solutions to our defence customers in areas such as secure communications, electronic warfare and air defence.Working Hours :Monday to Friday 9am to 5pm.Skills: IT skills....Read more...
CAD Design Engineer Role – Southampton
Employment Type: Contract Outside IR35 – 6 months
Rate: £30-35 an hour
Location: Southampton
We have an exciting opportunity for a CAD Design Engineer based in Romsey. Are you a CAD pro with solid 3D modelling experience, looking for your next hybrid contract role? Do you thrive on taking a design from concept to reality? Then this sounds like the perfect role for you.
Key Responsibilities:
Producing accurate and detailed 3D models and technical drawings using AutoCAD.
Translating client and internal requirements into practical, build-ready CAD designs.
Supporting project teams through the full design lifecycle, from concept through to implementation.
Working on subsea trenching machines, but experience in this field isn’t necessary
Liaising with clients, suppliers, and subcontractors to clarify requirements and resolve technical queries.
Own the end-to-end design process, from concept to implementation
Ensuring designs are compliant with relevant standards and project specifications.
Providing input on design improvements, value engineering, and efficient manufacturing solutions.
Skills and Experience:
Proven hands-on experience with 3D modelling
Have at least 2 years of experience in AutoCAD (or similar CAD tools)
Strong understanding of engineering design principles
Must have subsea, oil and gas, marine structural experience
Experience in hydraulics or electrical design is a plus
What’s in it for you:
Competitive rates
Remote working with occasional travel to the office twice a month
Ability to work on practical, engineering projects
Work as part of a collaborative, fast-moving environment with experienced engineers
If you’re an experienced CAD Design Engineer, and this sounds like a role you’d be interested in, then please apply below with your CV.....Read more...
AA Euro Group are currently seeking a BIM Engineer to join a leading M&E contractor on a pharmaceutical fit out job in Hull. As a BIM Engineer, you will play a key role in the design coordination, model management, and digital delivery of this fast-paced pharmaceutical fit-out project. You’ll work closely with the design team, project engineers, and construction managers to ensure BIM standards are maintained throughout all project stages.Key Responsibilities:
Develop, manage, and coordinate 3D BIM models for M&E systems in accordance with project BIM Execution Plans (BEP).Collaborate with internal design teams, consultants, and subcontractors to ensure accurate and coordinated design information.Conduct model reviews and clash detection using Navisworks or similar software, ensuring timely resolution of coordination issues.Support project engineers in interpreting and implementing design intent on-site.Maintain up-to-date project documentation and ensure model integrity throughout the project lifecycle.Generate detailed 2D drawings, schedules, and other deliverables as required for installation and fabrication.Work closely with the BIM Manager to implement company-wide digital engineering standards and continuous improvement initiatives.Provide technical support and training to site and office-based teams in the use of BIM tools and processes.
Skills & Experience Required:
Minimum 3–5 years’ experience as a BIM Engineer, ideally within the M&E contracting environment.Proficiency in Autodesk Revit, Navisworks, and AutoCAD; experience with BIM 360 / ACC is advantageous.Strong understanding of mechanical and electrical building services.Previous experience working on cleanroom or pharmaceutical fit-out projects preferred.Familiarity with CDE (Common Data Environment) platforms and ISO 19650 standards.Excellent communication and coordination skills with a proactive approach to problem-solving.Ability to work effectively within a multidisciplinary project team.
INDWC....Read more...
AA Euro Group are currently seeking a BIM Engineer to join a leading M&E contractor on a pharmaceutical fit out job in Hull. As a BIM Engineer, you will play a key role in the design coordination, model management, and digital delivery of this fast-paced pharmaceutical fit-out project. You’ll work closely with the design team, project engineers, and construction managers to ensure BIM standards are maintained throughout all project stages.Key Responsibilities:
Develop, manage, and coordinate 3D BIM models for M&E systems in accordance with project BIM Execution Plans (BEP).Collaborate with internal design teams, consultants, and subcontractors to ensure accurate and coordinated design information.Conduct model reviews and clash detection using Navisworks or similar software, ensuring timely resolution of coordination issues.Support project engineers in interpreting and implementing design intent on-site.Maintain up-to-date project documentation and ensure model integrity throughout the project lifecycle.Generate detailed 2D drawings, schedules, and other deliverables as required for installation and fabrication.Work closely with the BIM Manager to implement company-wide digital engineering standards and continuous improvement initiatives.Provide technical support and training to site and office-based teams in the use of BIM tools and processes.
Skills & Experience Required:
Minimum 3–5 years’ experience as a BIM Engineer, ideally within the M&E contracting environment.Proficiency in Autodesk Revit, Navisworks, and AutoCAD; experience with BIM 360 / ACC is advantageous.Strong understanding of mechanical and electrical building services.Previous experience working on cleanroom or pharmaceutical fit-out projects preferred.Familiarity with CDE (Common Data Environment) platforms and ISO 19650 standards.Excellent communication and coordination skills with a proactive approach to problem-solving.Ability to work effectively within a multidisciplinary project team.
INDWC....Read more...
This role is ideal for a recent school or college leaver with a passion for engineering and a willingness to learn. As an Apprentice Electrical Design Engineer, you’ll gain hands-on experience and receive full support as you develop your skills in electrical design. We’re looking for someone enthusiastic, with an interest in electrical systems and control panel design. You should be comfortable using computers and open to learning industry-standard software such as EPLAN P8.
Key Responsibilities:
Assist in designing electrical, electronic, and pneumatic systems for standard and custom equipment
Ensure designs comply with the Machinery Directive
Support development of electrical software and hardware
Provide technical assistance to Sales, Service, Production, and Spares teams
Liaise with suppliers on technical matters
Maintain and update electrical documentation
Occasionally travel to our headquarters in Stuttgart for training and product briefings
Training:
The learner will be studying the Engineering Technician Level 3 Apprenticeship Standard qualification
Day release to West Suffolk College
Training Outcome:Successful Completion of the Engineering Apprentice scheme within HERMA UK Ltd can result in a permanent position within the manufacturing facility. The company has a firm belief of reward through skills, and as an apprentice gains experience and worth to the business will find that their salary will grow along with their experience.Employer Description:HERMA UK Ltd is a world leader in the manufacturer of self-adhesive label application systems. We have a worldwide customer base which consists of Blue Chip companies across a broad spectrum of markets, including the Toiletry, Cosmetic, Pharmaceutical and Food industries. HERMA has 2 sites in the UK, Haverhill being part of the machinery division. In Haverhill we currently have a team of 43, which will grow with our natural growth plans over the next years. World wide HERMA has in excess of 1000 employees, with a turn over of around 300 million pounds per year.Working Hours :Monday - Friday (8:30 to 16:30), with a half hour lunch break.Skills: Communication skills,Attention to detail,Logical,IT skills,Problem solving skills,Initiative,Team working....Read more...
Power Electronics Engineer
Location: Wickford, Essex (on-site, with some travel and occasional customer visits as required)
An excellent opportunity has arisen for an experienced Power Electronics Engineer to join a well-established UK power electronics manufacturer, specialising in the design and production of advanced power supply solutions. The company develops AC-DC and DC-DC power supplies, transformer rectifiers, configurable modular systems, high-voltage systems, and fully customised designs. Serving customers across aerospace, defence, industrial, telecoms, and emerging markets such as hydrogen production and carbon capture, the business is recognised for delivering innovative, bespoke, and reliable solutions in quality-critical sectors.
This role is ideal for a hands-on engineer with strong analogue electronics and power supply design experience, who enjoys solving complex technical challenges and working across the full product lifecycle — from concept, prototyping, and testing through to customer delivery. The position also offers the opportunity to work closely with the Engineering Director, gaining mentorship with a clear pathway to grow into a future leadership role.
Main Responsibilities of the Power Electronics Engineer (based in Wickford, Essex):
Design, develop, test, and troubleshoot power supply products (AC/DC, DC/DC, rectifiers, high-voltage systems).
Lead and manage engineering projects from concept through to completion, ensuring delivery to time, cost, and quality.
Collaborate with cross-functional teams, including production and supply chain, to ensure design intent is met.
Produce and maintain technical documentation including specifications, test procedures, and design records.
Support the sales teams with technical input to customer enquiries, proposals, and specifications.
Interface directly with customers on technical issues, projects, and RMAs, ensuring smooth resolution.
Drive research and innovation to enhance products, processes, and new technologies.
Mentor junior engineers and deliver technical training to internal staff and customers.
Requirements of the Power Electronics Engineer (based in Wickford, Essex):
Degree (or equivalent) in Electrical/Electronics Engineering (Master’s desirable).
Extensive experience in electronics engineering, including PCB design.
Strong background in analogue electronics and power supply design (AC/DC, DC/DC, rectifiers, high-voltage).
Proficiency in simulation and design tools such as SPICE and CAD software.
Practical, hands-on approach to prototyping, soldering, testing, and troubleshooting.
Excellent problem-solving, analytical, and communication skills.
Flexible, detail-oriented, and able to manage multiple projects in a small but dynamic team.
Full UK driving licence and legal right to work in the UK.
Desirable Experience:
Background in telecoms power supply design or other efficiency-critical markets.
Low-level programming knowledge and/or digital design alongside analogue expertise.
Commercial awareness of electronics product development and ability to support technical sales.
Experience in quality-critical sectors such as aerospace, defence, or industrial.
This is a key role within the engineering team, offering long-term development opportunities, including progression to Engineering Director.
To apply for this Power Electronics Engineer role based in Wickford, Essex, please send your CV to:
Kchandarana@redlinegroup.com or call 01582 878 830 / 07961 158 784....Read more...
We are looking for a Maintenance Engineer to join a cutting-edge aerospace manufacturing facility. Your role will encompass the maintenance, repairs, and enhancements of the production plant, covering both building and equipment.
Your responsibilities will involve addressing issues with office-based equipment and maintaining precision engineering research and design facilities, which include hazardous chemicals and high-pressure gas systems. The ideal candidate should possess a pragmatic mindset and have practical experience in welding and a variety of maintenance areas, including carpentry, electrical work, HVAC systems, plumbing, compressor and boiler maintenance, vehicle upkeep, and machine shop fabrication.
You should have experience in:
Plumbing, carpentry, and fabrication
Familiarity with hand and electrical tools
Knowledge of machine shop equipment like lathes, band/chop saws, pillar drills, and grinders
Welding and fabrication skills, preferably holding at least a City and Guilds Level 2 certification, with Level 3 or similar structural welding qualifications being advantageous. ASME certification is a plus.
Previous experience in facilities maintenance or engineering fabrication settings
....Read more...
We are looking for a Maintenance Engineer to join a cutting-edge aerospace manufacturing facility. Your role will encompass the maintenance, repairs, and enhancements of the production plant, covering both building and equipment.
Your responsibilities will involve addressing issues with office-based equipment and maintaining precision engineering research and design facilities, which include hazardous chemicals and high-pressure gas systems. The ideal candidate should possess a pragmatic mindset and have practical experience in welding and a variety of maintenance areas, including carpentry, electrical work, HVAC systems, plumbing, compressor and boiler maintenance, vehicle upkeep, and machine shop fabrication.
You should have experience in:
Plumbing, carpentry, and fabrication
Familiarity with hand and electrical tools
Knowledge of machine shop equipment like lathes, band/chop saws, pillar drills, and grinders
Welding and fabrication skills, preferably holding at least a City and Guilds Level 2 certification, with Level 3 or similar structural welding qualifications being advantageous. ASME certification is a plus.
Previous experience in facilities maintenance or engineering fabrication settings
....Read more...
We are looking for a Maintenance Engineer to join a cutting-edge aerospace manufacturing facility. Your role will encompass the maintenance, repairs, and enhancements of the production plant, covering both building and equipment.
Your responsibilities will involve addressing issues with office-based equipment and maintaining precision engineering research and design facilities, which include hazardous chemicals and high-pressure gas systems. The ideal candidate should possess a pragmatic mindset and have practical experience in welding and a variety of maintenance areas, including carpentry, electrical work, HVAC systems, plumbing, compressor and boiler maintenance, vehicle upkeep, and machine shop fabrication.
You should have experience in:
Plumbing, carpentry, and fabrication
Familiarity with hand and electrical tools
Knowledge of machine shop equipment like lathes, band/chop saws, pillar drills, and grinders
Welding and fabrication skills, preferably holding at least a City and Guilds Level 2 certification, with Level 3 or similar structural welding qualifications being advantageous. ASME certification is a plus.
Previous experience in facilities maintenance or engineering fabrication settings
....Read more...
We are looking for a Maintenance Engineer to join a cutting-edge aerospace manufacturing facility. Your role will encompass the maintenance, repairs, and enhancements of the production plant, covering both building and equipment.
Your responsibilities will involve addressing issues with office-based equipment and maintaining precision engineering research and design facilities, which include hazardous chemicals and high-pressure gas systems. The ideal candidate should possess a pragmatic mindset and have practical experience in welding and a variety of maintenance areas, including carpentry, electrical work, HVAC systems, plumbing, compressor and boiler maintenance, vehicle upkeep, and machine shop fabrication.
You should have experience in:
Plumbing, carpentry, and fabrication
Familiarity with hand and electrical tools
Knowledge of machine shop equipment like lathes, band/chop saws, pillar drills, and grinders
Welding and fabrication skills, preferably holding at least a City and Guilds Level 2 certification, with Level 3 or similar structural welding qualifications being advantageous. ASME certification is a plus.
Previous experience in facilities maintenance or engineering fabrication settings
....Read more...
Manufacturing Engineer - Norwich, Norfolk
Could you be interested in a new, exciting, Senior Manufacturing Engineer job based in Norwich within a multi-million pound global company?
Responsibilities for the Manufacturing Engineer job in Norwich:
Provide day to day engineering support and expertise in production for released products.
Evaluate new and existing production lines to identify improvements to manufacturing process, analytical requirements, and equipment; advise appropriate engineering personnel on manufacturability, process robustness and equipment requirements.
Ensure the smooth transition of new products into manufacturing (NPI).
Co-ordinate the activities of personnel involved in engineering investigations and new product pilot runs.
Key skills and experience required for the Manufacturing Engineer job:
Education: bachelor’s degree - Science in Engineering / HND/ Electrical/Electronic Engineering.
Experience in production engineering.
Expert knowledge of electronic engineering principles, practices, and techniques commonly employed in the design and production of electronic products.
An in-depth understanding of Lean Manufacturing.
Understanding Kaizen practices is preferred.
This is a fantastic opportunity to join a successful and world leading Technology Company with cutting edge products, who can offer dynamic, challenging and exciting career opportunities.
APPLY NOW! If you are interested in this Manufacturing Engineer job in Norwich or other Manufacturing Engineer jobs, please call Ricky Wilcocks on 01582 878810 or 079317 88834 To apply email: Rwilcocks@redlinegroup.Com....Read more...
Based in Bristol , you'll work alongside a team which specialises in the delivery of building services, energy and sustainability services.
We offer a fresh approach by getting involved early, working collaboratively with the design team, guiding design development and using our expertise to help clients make key decisions - an approach that always results in a building that delivers. Training:
Building Services Engineer Level 6 (Degree with honours) Apprenticeship Standard
Leeds College of Building - Block Release
Training Outcome:
Mechanical/Electrical Engineer
Employer Description:The Stantec community unites more than 34,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients’ vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today’s challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn’t exactly align, we encourage you to apply.Working Hours :Monday - Friday, Shifts to be confirmed.Skills: Communication skills,Problem solving skills,Team working....Read more...
Based in Bristol, you'll work alongside a team which specialises in the delivery of building services, energy and sustainability services. We offer a fresh approach by getting involved early, working collaboratively with the design team, guiding design development and using our expertise to help clients make key decisions - an approach that always results in a building that delivers. Training:
Building Services Engineer Level 6
Leeds School of Building - Block Release
Bristol, UWE - Day Release
Training Outcome:Mechanical/Electrical Engineer. Employer Description:The Stantec community unites more than 34,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients’ vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today’s challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn’t exactly align, we encourage you to apply.Working Hours :Monday to Friday, working hours TBCSkills: Communication skills,Problem solving skills,Team working....Read more...
Test Engineer Location: Horsham, West Sussex
Salary: £35,000 £40,000 per annum
Hours: Full-time, Monday to Friday, onsite
The Role We are seeking a skilled Test Engineer to join the Test Department of a leading technology business in Horsham. Reporting to the Test Engineering Manager, you will be responsible for testing electroâopticalâmechanical components, sub-assemblies, and complete systems, ensuring accuracy of results, diagnosing faults, and supporting the wider engineering team in resolving production or design issues.
This is an exciting opportunity for someone with strong hands-on electrical/electro-mechanical test expertise to contribute to developing high-quality, cutting-edge products in a collaborative engineering environment.
Key Responsibilities
- Carry out Factory Acceptance Tests (FATs) using standard test equipment (power supplies, oscilloscopes, digital multi-meters).
- Assist in the creation of comprehensive test procedures and FAT documentation.
- Fault-find across a wide range of electromechanical equipment.
- Communicate effectively with both technical and non-technical colleagues.
- Ensure compliance with quality processes, ISO9001 standards, and company policies.
- Maintain accurate test documentation and reporting.
- Contribute to continuous improvement of test processes and facilities.
- Support field service activities when required.
- Maintain a safe, clean, and well-organised workshop and office environment.
Skills & Experience
Essential:
- Strong knowledge of testing electrical and electro-mechanical systems.
- Ability to write and execute test plans and FATs for new product launches.
- Competent in reading technical drawings, wiring diagrams, and PCB schematics.
- Ability to support wider production and quality teams where needed.
- HNC or equivalent qualification in Electronics Engineering.
- Hands-on experience in manual testing and integration.
- Computer literate with experience in Microsoft Word & Excel.
Desirable:
- PCB testing and fault-finding experience.
- Familiarity with digital camera and video protocols.
- Knowledge of automated test software.
- Awareness of communication protocols and networking.
- Experience in PLC programming, CAD packages.
To find out more please contact Max Sinclair max@holtengineering.co.uk or hit apply!....Read more...
About the OpportunityJoin a global leader in advanced defence technology, developing mission-critical systems that protect and empower naval forces across the world.Our client designs and delivers cutting-edge electronic and sensing solutions that support the most demanding maritime environments, from surface vessels to underwater platforms and autonomous systems.This is an exciting opportunity to take on technical leadership within a multi-disciplinary engineering team, shaping the future of naval electronics and next-generation mission systems.The RoleAs a Senior Electronics Engineer, you’ll play a key role in the design, development, and delivery of complex electronic systems used in advanced defence applications.You’ll work across the full engineering lifecycle from concept and prototyping through to verification, test, and production handover, ensuring each solution meets the highest technical and safety standards.Key Responsibilities:• Lead the design and development of analogue, digital, and mixed-signal electronic circuits.• Define technical requirements, specifications, and validation plans.• Conduct detailed design reviews, analysis, and testing.• Mentor and guide junior engineers, supporting knowledge transfer and technical excellence.• Collaborate closely with systems, software, and mechanical engineers to deliver integrated solutions.• Contribute to continuous improvement in design processes and best practices.• Ensure compliance with safety, environmental, and defence standards.About YouYou’ll be an experienced electronics engineer with strong technical depth, ideally gained in defence, aerospace, or other complex engineering environments. You’ll be comfortable taking technical ownership and influencing design decisions.Essential Skills & Experience:• Degree (or equivalent) in Electronics, Electrical Engineering, or a related discipline.• Proven experience in the design and development of electronic hardware.• Strong understanding of circuit design, schematic capture, PCB layout, and test.• Experience with EMC design, environmental testing, or design for manufacture (DFM) is advantageous.• Excellent communication and stakeholder engagement skills.• Eligible to obtain UK Security Clearance (SC).What’s on Offer• Optional 9-day fortnight – every other Friday off!• Flexible working hours and hybrid arrangements.• Time Off in Lieu (TOIL) up to 1 day per month.• Early finish Fridays (1pm).• Annual bonus and performance incentives.• 25 days annual leave + Christmas shutdown.• Buy or sell holiday scheme.• Private healthcare, dental, and critical illness options.• Discount hub – access to 200+ retailers.• 4x life cover and a market-leading pension (5% employer minimum).• Relocation support available for exceptional candidates.Why JoinYou’ll be part of a forward-thinking organisation that values innovation, collaboration, and engineering excellence. The business is known for its supportive culture, flexible approach to working, and commitment to developing its people.They also take pride in being an inclusive and diverse employer, encouraging applications from all backgrounds, and fostering a culture where everyone can thrive and be their authentic self.Apply TodayIf you’re a Senior Electronics Engineer ready to contribute to the next generation of defence technology, we want to hear from you.Join a company where your work truly makes a difference — safeguarding the seas and advancing naval capability worldwide.....Read more...
A Senior Electronics Test Engineer is sought to join an innovative engineering team in Essex, contributing to the testing, validation, and optimisation of advanced electronic modules for the global test and measurement industry.
The Senior Electronics Test Engineer, Essex, will take ownership of complex testing projects, applying strong analogue and digital expertise to resolve technical issues, support product development, and ensure the highest engineering standards. You will also play a key role in developing automated test systems and mentoring junior colleagues.
Responsibilities include:
Perform in-depth testing of new and existing electronic modules to the highest standards.
Lead complex projects in collaboration with international colleagues.
Resolve advanced electronic test issues using technical knowledge and initiative.
Develop C++ software applications for engineering and production test systems.
Provide coaching, support, and technical guidance to engineers and technicians.
The Senior Electronics Test Engineer, Essex, will have the following key skills:
Bachelor’s or Master’s degree in Electronic or Electrical Engineering.
Proven experience in electronics testing (analogue and digital).
Strong circuit design, signal processing, and fault-finding skills.
Proficiency in C++ (or similar) for automated test systems.
Experience with oscilloscopes, digital multimeters, signal generators, and logic analysers.
APPLY NOW – Senior Electronics Test Engineer job in Essex could be of interest, send your CV to adighton@redlinegroup.com Or call Adam on 01582 878821 / 07961158768....Read more...
