A globally leading chemical manufacturing company located in Lincolnshire is seeking a Process Engineer to join their team, offering a salary of up to £65,000 per annum. The comprehensive benefits package includes a double-figure pension, annual bonus, hybrid working options, private medical insurance, and 25 days of annual leave plus bank holidays.As a Process Engineer you will leverage your expertise to contribute to capital improvement projects throughout their lifecycle, from conception to commissioning. Your extensive knowledge and experience will be crucial in leading improvements and aiding in the development of the site's five-year plan.Process Engineer Responsibilities
Offer engineering expertise and guidance throughout all stages of the site capital program, from inception to completion.
Generate design deliverables for capital project design basis, HAZOP, LOPA, and datasheets.
Assist the operations teams in ensuring the ongoing safe operation of the production plant.
Identify prospective improvement projects in line with the company's Safe, Quality, Low Cost, Sustainable Tonnes (SQLCST) strategy.
Demonstrate a comprehensive understanding of safety issues, equipment, and industry-wide standards.
Collaborate with operators and the operations day team to commission and implement projects.
Provide mentorship and coaching to junior members of the department while peer reviewing and approving their work output.
For consideration in this role, candidates should hold a degree, ideally be chartered, possess a minimum of 6 years' process engineering experience, and demonstrate expertise in both batch and continuous improvements, preferably in Upper Tier COMAH sites, showcasing proven knowledge of process design, calculations, specifications, and commissioning.Please apply direct for further information regarding this Process Engineer opportunity.....Read more...
Systems Test Engineer opportunity, based in Maldon, Essex has just become available!
An exciting career opportunity has arisen as a Systems Test Engineer, based in Maldon, Essex for a leading design and manufacturer of Ultra Low Power RFIC's & mixed signal semiconductor chips serving the IOT / Wireless communications markets.
The successful Systems Test Engineer, based in Maldon, Essex will be responsible for designing software and hardware to evaluate and test new designs. From these tests you will provide evaluation and comprehensive test reports and look into the development of automated production tests.
Key skills & experience for a Systems Test Engineer, based in Maldon, Essex;
Experience with programming in C, Python or similar assembly languages
An understanding of RF circuitry, NI Labview equipment and RF design principals
This is a great chance to join a growing company who can offer the opportunity for career progression and personal development.
To apply for the Systems Test Engineer job based in Maldon, Essex please send your CV to TDrew@redlinegroup.Com quoting reference THD1248. For more information on Test Engineering jobs in the UK contact Tom Drew on 01582 878832 or 07961158762, otherwise we always welcome the opportunity to discuss other Engineering jobs.....Read more...
Seeking experienced RF, Analog, Mixed-Signal IC Design Engineer to join our dynamic team. From concept to tape-out, you'll design and simulate high-accuracy IC blocks, lead RF, analog, mixed-signal circuit design, and collaborate with multidisciplinary teams. Bachelor???s in Electronic Engineering, 2+ years??? experience in custom analogue, mixed-signal circuits, CAD proficiency, and familiarity with RF technologies required. Apply now for a chance to work with leading-edge technologies and industry giants.....Read more...
Electronics Design Engineer – Medical Devices FPGA – Cambridge
An exciting and growing Medical Devices organization based in Cambridge is currently seeking an experienced Electronics Design Engineer to work on the development of life-saving and life-improving Medical Devices.
With a primary focus on FPGA design, you will collaborate with other electronics engineers, mechanical engineers, software engineers, physicists, and scientists in the development of these Medical Devices.
In addition to FPGA Design, you will also engage in hands-on prototype development, using soldering to construct the electronics you have designed.
You will be working with highly complex technologies, ensuring that your work remains challenging every day.
Ideally, you would have prior experience in electronics design for Medical Devices. However, we are open to candidates from other highly regulated sectors, as long as your expertise lies in FPGA electronics design.
It is expected that you hold a degree in electronics engineering. Nevertheless, if you have transitioned into an Electronics Design Engineering role through an alternative path, we would still like to hear from you, as industry experience holds significant importance.
Your dedication will be rewarded with an excellent starting salary, opportunities for career development, job security, bonuses, a pension plan, life assurance, and other outstanding benefits.
Given the anticipated high level of interest in this role, if you are seeking a new opportunity, we recommend submitting your application promptly to avoid missing out.
For more information, please do not hesitate to contact Andrew Welsh, Director of Medical Devices Recruitment, and Scientific Recruitment Specialist at Newton Colmore, at +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will get in touch with you.
Newton Colmore Consulting is a specialized recruitment company operating within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
About The Company
My client an established design and manufacturer of bespoke, turnkey food processing systems are currently looking to recruit an experienced Electrical Software Engineer with a strong background and experience in Programmable Logic Controllers (PLCs) and Human Machine Interfaces (HMIs).
The successful candidate will be responsible for the design, development and implementation of PLC and HMI software for a variety of automations platforms. You will play a crucial role in the entire project lifecycle, from initial design and hardware specification to site installation and commissioning.
This is an office-based role; however, candidates must have the ability and be willing to travel across the UK and Europe for onsite work.
Electrical Software Engineer - Package Details
£40,000 to £65,000 dependent on experience
40 Hour Working Week (Overtime paid in excess of 40 hours)
Travel Costs & Expenses Paid (including travel time for business)
Access to company pool vehicles for business travel
25 Days Holiday + Bank Holidays
Pension Scheme
Free On-Site Parking
Electrical Software Engineer – Experience Requirements
Educated to Degree level in Electrical Engineering, Computer Engineering or a related field
Minimum 3 years’ experience in PLC and HMI Programming for multiple platforms
Previous experience of at least two of the following automation platforms – Omron, Siemens, Allen-Bradley and/or Mitsubishi
Strong understanding of Electrical Control Systems, including power distribution, motor control and instrumentation
Proficient in PLC programming languages such as Ladder Logic, Structured Text and Function Block Diagrams
Experience with PLC and HMI configuration software
Knowledge of electrical hardware components and control panel design principles
Ability to travel for site visits and installations
18th Edition qualification / experience
Electrical Software Engineer – Key Responsibilities
Develop and implement PLC and HMI software for various automation projects using industry-standard programming languages like Ladder Logic, Structured Text, and Function Block Diagrams.
Design, specify, and issue electrical hardware parts lists and control panels, ensuring compatibility with chosen PLC platforms.
Collaborate with electrical and mechanical engineers to ensure system integration and functionality.
Participate in the design review process and provide technical expertise on PLC and HMI aspects.
Perform site visits for installation, commissioning, and troubleshooting of automation systems.
Prepare technical documentation, including PLC and HMI code, control panel schematics, and user manuals.
Stay up to date with the latest advancements in PLC, HMI technologies, and relevant safety regulations
....Read more...
Holt Executive are partnered with a leading electro-optics design and manufacturing business, which is seeking a Senior Electronics Engineer to join their growing Engineering team.
The successful Senior Electronics Engineer will be responsible for proactively developing innovative electronics while providing valuable leadership to the team.
Key Responsibilities for the Senior Electronics Engineer:
- Provide expertise in circuit design, components, and PCB technology.
- Working in technology areas of EMC, Power Management, Servo Control, processor interfacing and communications.
- Provide expertise in the realms of power and signal transmission over wired medium with the ability to define and objectively review an overall architecture, including power management, system wiring and knowledge of production processes.
- Hold a pivotal role within a project and set the standards of good engineering practice, leading by example, and being seen as an expert in their given field.
- Review and analyse processes and practices within the department, driving and encouraging innovation across the board. Regularly communicate with senior management, customers and other key stakeholders maintaining a focus on tactical and some strategic oversight of projects, technology, and team development.
- Take a lead role in developing or enhancing technology within the business, providing subject matter expertise for technology areas and applying these to R&D development activities or projects.
- Technical leadership of multi-disciplined projects, with the ability to foster a culture of a systematic approach while providing our customers with solutions.
- Provide key insights into the resource planning of engineers working under them.
- Line management role to support other engineers as part of a smaller sub-team overseeing training and development needs.
Key Skills and Experience for the Senior Electronics Engineer:
Essential
- Strong degree in a related discipline accredited by the IET. Typically, 6 years of relevant experience is expected.
- Proven experience in leading and/or supervising projects or people for routine and non-routine work.
- Solid all-round theoretical and practical understanding of electrical and electronic designs
- Ability to complete analysis-based activities i.e. (circuit emulation, performance, or power budgets).
- Ability to assess and highlight key project risks, schedules, and mitigations and identify critical design activities.
- Overall awareness of the full project lifecycle ranging from opportunity/bid development through to continuing customer support.
- A proven track record of innovation-based approaches to all aspects of engineering/leadership.
- Ability to investigate and fault-find technical problems at PCB or system level, with the capability to identify root causes or procedural reforms.
- Accredited as a Chartered Engineer or working towards Chartership.
- Embedded Software Design, including ARM/KEIL.
- Experience with EMC to military standards, with the ability to manage, plan and resolve issues at an architecture and embedded level.
- Knowledge of Motors and drive technology with the ability to calculate motor performance.
- Awareness of control systems analysis and performance techniques with the ability to articulate these to fellow engineers/Stakeholders.
- Practised in the use of analysis and simulation tools such as Python, Matlab, Simulink, LT-Spice, Simetrix etc.
- Familiar with management tools such as JIRA, Confluence, MS Project.
- Practised in the use and management of PCB design tools such as Altium, Cadence OrCAD.
- Familiar with design resilience techniques such as Failure Mode Effects Analysis.
- Awareness of Lightning Direct and Indirect Effects.
- Familiar with the design of electronics within harsh environments typical with Military equipment.
Company Benefits:
- 37.5 hour working week and lunchtime finishes on a Friday.
- 28 days annual leave and Christmas closure.
- Employee Help@Hand Service gives you and your family access to four key services including remote GP service, second opinion, mental health pathway service, and physiotherapy consultations.
- Life Assurance Policy, including Bereavement Counselling and Probate Helpline.
- Company Share Incentive Plan and Save as You Earn Scheme.
- Wellbeing initiatives, including access to the Aviva Wellbeing App and the addition of mental health support for all employees plus regular activities across all sites to support and promote well-being.
- Employee discounts scheme (including access to an additional wellbeing hub).
- Excellent Learning & Development opportunities.
If your skills and experience match this Senior Electronics Engineer opportunity, we encourage you to apply by sending your CV to info@holtexecutive.com
....Read more...
Engineer Director£85,000 - £90,000 Basic + Hybrid + Progression + 33 Days Holiday + Life Cover + Pension + L&D OpportunitiesAn amazing opportunity for an Engineer Director to work for a renowned company with a global reputation for excellence in the marine industry. You will come in and reestablish their business in the UK and become a true industry specialist working in a huge market.This company has a first class reputation in their industry and is looking for an engineering director to spearhead their UK growth. You'll be leading the technical department and working with huge clients in the marine industry, whilst managing and growing a multi disciplinary team. Your role as Engineer Director will include: * Managing the engineering staff and their technical output. * Understand the business strategy and company goals and build a roadmap to meet these aspirations. * Providing engineering input and design reviews. * To take the lead role in the application, review and upkeep of engineering business processes and quality assurance procedures across engineering conducted. * Represent the Group Chief Engineer at programme design reviews and present engineering programme reports. * Develop individuals and group capability in line with business strategy.The successful Engineer Director will need: * Degree in Engineering, Mechanical Engineering, Electrical Engineering, Maintenance or equivalent. * Chartered Engineer (CEng.) accreditation or working towards * Significant experience working in the marine industry either in: Oil & Gas, Renewables, Commercial, Cruise & Ferry, Defence. * Management experience * Understand the engineering process from concept design to building it and handing it over. * Must hold current Driving Licence.Please apply or call Zil Akdogan on 02038137932
Keywords: engineering director. Director engineering, principal engineer, engineer, directorThis vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website to view other positions we are currently handling.Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Are you an Electronic Test Engineer based in Slough, Berkshire, searching for an exciting new opportunity working with a leader in power quality products and refrigeration controls?
My client is a UK based electronics design and manufacturing company who due to recent growth, are expanding and are looking for an Electronic Test Engineer to join the team.
As an Electronic Test Engineer, you will be:
- Supporting the R&D team with new and existing products
- Design validation of new products
- Fault finding on PCBs and products
- Making cable harnesses and test jigs
- Pre-compliance testing of products including EMC and temperature testing
Requirements for the Electronic Test Engineer role based in Slough, Berkshire:
- HND or degree qualified in Electrical and Electronics Engineering (or similar discipline)
- 3 years+ experience working with electronic products in a similar role
- Experience with fault finding down to component level
- A good understanding of electronic circuits and able to read schematic diagrams
- Able to use hands tools, solder components, crimp cables, and use electronic test equipment
If this Electronic Test Engineer role based in Slough, Berkshire is of interest, please email a copy of your most recent CV to LRogers@redlinegroup.Com alternately, call Leah Rogers on 01582 878834 or 07961 158783.....Read more...
Due to company growth, expansion and a long sustainable order book we are now seeking a number of Production Engineer to join a market leading Engineering and Manufacturing business close the Batley area.Our client has a long standing history of designing and manufacturing innovative solutions, supported with a protected global order book and significant investment across their manufacturing operations in West Yorkshire.What’s in it for you as a Production Engineer:
Training and career development opportunities
Base salary of £40,000 per annum, potentially negotiable, PLUS Annual company bonus
33 days holiday, increasing to 38 days holiday with service
Life assurance, Private healthcare, 5% matched pension etc
The opportunity to join a market leading, International manufacturing business with a global foot print and long tradition in Engineering and Manufacturing operations
What do you need to apply to the Production Engineer Vacancy:
HNC or HND or Degree in mechanical engineering or similar with experience in a bespoke fabrication & assembly environment
The ability to generate clear production assembly work instructions.
Experience of developing production flow lines
Experience and knowledge of industrial engineering or project engineering.
General knowledge in areas of root cause corrective action, lean and project planning.
Experience in Mechanical CAD programs such as AutoCAD, Solidworks, Creo or similar packages.
Key Duties of Production Engineer:
Developing and maintaining production processes and procedures across Fabrication and/or assembly operations
Lead and implement process improvement activities (designing, improving, organising) to reduce waste and improve efficiency.
Support new product introduction, ensuring effective collaboration between Engineering & Production.
Gather relevant production data throughout the New Product Development process.
Support introduction of product at concept phase and through production ramp up.
Maintain production process documentation.
Design and/or implement tools and Equipment to improve the production process.
Design and implement production flow lines, factory floorplans and modular workstations.
Contribute to the Design for Manufacture process.
Identify areas for producibility and quality improvements in assembly, test and product design.
If of interest, please apply now.....Read more...
Mechanical Design Engineer
Salary up to £50k (DOE)
As a member of the engineering team, The successful Mechanical Design Engineer will be joining a small but highly skilled R&D team where they will be working to progress the company's hardware products. This will entail both developing new products and reforming and improving the existing product range. Your main responsibilities will be
Key Responsibilities
- Creating new products and solutions to meet commercial requirements.
- Reimagining existing products, increasing functionality and potential applications.
- Redesigning products to deliver better performance and to improve manufacturability.
- Cost-engineering of existing products.
- Implementing and maintaining a repository of designs.
- Ensuring correct change-control procedures are adhered to.
- Supporting the production engineers in the development of rigs and processes, where required.
- Ensure all investigations and technical decisions are planned and documented effectively.
- Ensure the delivery of projects to the required timelines.
- Provide regular reports on progress and technical matters to stakeholders.
- Provide technical expertise to other areas of the business as required.
The Right Person
The successful Mechanical Design Engineer will be developing complex measurement instruments deployed in difficult environments so a background in sensors or ingress protection would be beneficial as well as experience in the following areas:
- Masters degree or equivalent in Mechanical or Electronic Engineering, or similar.
- 4+ years industry experience.
- Mechanical design.
- Strong 3D CAD skills (e.g. SolidEdge)
- Cost-engineering.
- Design-for-manufacture.
- Design for ingress protection (e.g. IP68).
- Development from prototype through to manufacture.
- Data analysis and strong numerical skills.
- Technical writing, processes and documentation.
- Problem solving.
- Change control and repository management.
The following skills would be beneficial to a good candidate, but are not essential to the role:
- Assembly and fabrication (e.g. for prototypes).
- Experience in working with electronics.
- Fault-finding electronics and sensors.
- Low power applications.
- BoM creation and obsolescence.
- Sensor calibration and test automation.
- Rapid prototyping.
- Project management.
Interested? Here are your three options
1. This is the job for me, I meet all the requirements Call now and lets talk through your experience. Ask for Jon Webster on between 8.30am 5.30pm
2. I think Im right for this position, but Im not sure about some of the detail Click apply now so I can read your CV and come back to you.
3. Im interested but need to know more about what this job can offer me email jon@precisionrecruitment.co.uk with your CV and questions and I will reply with more detail.
Precision are committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system.
PPTP....Read more...
Electronic Design Engineer will be responsible for designing and developing electronics and printed-circuit assemblies for our future products. Key responsibilities include PCB layout, collaborative work with colleagues, documentation generation, test and verification, cross-functional collaboration, compliance and testing, and progress reporting.
Requirements:
Diploma or degree in electronics or related discipline.
5+ years of electronics and PCB design experience.
2+ years recent experience with Altium Designer or Cadence OrCAD or Allegro.
Understanding of PCB signal integrity, stack-up, impedance control, ESD mitigation, and EMC compliance.
Bonus: Knowledge of FPGA design and GNSS or automotive applications.....Read more...
Manufacturing Engineer
I'm on the lookout for a Manufacturing Engineer to join a highly reputable and long established company within the Yeovil area. The role of the Manufacturing Engineer is to implement new and improve existing production lines and processes in order to maximise efficiency's. You will be tasked to design, setup and develop these processes utilising lean principles to optimise productivity.
The client is owned by a globally recognised powerhouse, collectively they employ over 100,000 globally. As the Manufacturing Engineer there will be plenty of opportunities to learn and grow within the business too.
Manufacturing Engineer Role:
- To assist the Technician team in determining the correct TPM activities and schedules.
- To design, setup and develop production lines / processes utilising lean principles to optimise cell productivity.
- Review existing production Cells and implement changes to improve labour utilisation.
- Provide solutions / improvements to address HSE issues
- Provide support to the manufacturing Cells and drive continuous improvement through RCA.
- Provide technical / Process support to Engineering Technicians in support of RCA.
- To ensure that all new or modified processes, equipment and materials are introduced and used in accordance with UK Health and Safety regulations and Company Procedures.
- Ensuring timely completion of Kaizen ideas
- Be a key driver in our safety first culture
The successful Manufacturing Engineer:
- Ideally Degree Educated and/or Time served apprenticeship in Mechanical or Production Engineering.
- Minimum of 3 years experience in Manufacturing Engineering related support or suitable discipline.
- Proven Experience in managing projects is essential.
- Six Sigma Green Belt qualification (or practical application) is desirable.
- Hands on practical Engineering skills
- Demonstrable RCA problem solving skills.
How to apply for the Manufacturing Engineer Role:
Please apply for the vacancy. If you are interested in finding out more get in touch with Liam Nother on the below information:
Liam.Nother @holtengineering.co.uk....Read more...
An exciting Senior Software Engineer C, C++ job opportunity has arisen, to join a team to design and develop software for a market leader in high quality special purpose equipment, based in Dorset, commutable from Weymouth, Dorchester, Bournemouth, Christchurch, Yeovil.
This Senior Software Engineer C, C++ job is for someone who has a passion for engineering and ambition to work on a variety of complex electronic products. It also offers the opportunity to work on a variety of projects for industries such as medical and defence.
The Senior Software Engineer C, C++ will join a well-established and expanding team of developers, in a friendly and social environment.
Key Skills and Requirements for the Senior Software Engineer C, C++ job include:
Strong C, C++ programming knowledge
Degree or similar qualification in a related discipline.
Experience various IDEs include Visual Studio and MPLAB
Full software product lifecycle including design
Eligible for Security Check (SC) clearance
This is a job for a bright Senior Software Engineer C, C++ to join a company in Dorset, that really care about their staff and offer fantastic internal and external training. They offer great benefits along with a bonus scheme.
To apply for this job, or for more information on this Senior Software Engineer C, C++ job in Dorset, please send your CV and covering letter to LRogers@redlinegroup.Com, or for more information contact Leah Rogers on 01582 878834 or 07961 158783.....Read more...
An exciting opportunity has arisen for a Test Development Engineer - LabVIEW based in Fareham, Hampshire to join a leading manufacturer of complex electronics equipment that is sold into the marine industry all over the world.
As an Test Development Engineer - LabVIEW based in Fareham, you will work in a small team of highly experienced engineers, developing and supporting production test equipment.
You will be responsible for the test equipment from initial specification, through the design, build and installation phases, working closely with all the project disciplines.
Responsibilities also include:
Working closely with the Industrialisation Test Manager and Design Leads to ensure that the test strategy sufficiently exercise products to capture potential manufacturing defects across the complete product working parameters.
Working closely with the industrialisation team, design and produce test equipment that correctly delivers the manufacturing test strategy and is reliable, robust and cost effective.
Developing, producing, and supplying all associated documentation, schedules and training for the test solutions.
Installing the completed test solution into our EMS partners.
The successful Test Development Engineer - LabVIEW based in Fareham will be highly skilled in current versions of National Instruments LabVIEW, preferably qualified to CLD or CLA levels and have significant experience in production test on Radar products.
My client offers superb training and career progression opportunities. If you are looking for a position within a company where you can progress your career while working on some ground-breaking technology, then this is the role for you!
APPLY NOW for the Test Development Engineer - LabVIEW, based in Fareham by emailing your CV to Twilliams@redlinegroup.Com or call Tarah on 01582 878821 if you have any specific questions about this role.....Read more...
A Senior Mechanical Building Services Design Engineer is required in an established MEP company based in Liverpool.Qualifications:
Candidates would need to have HVAC and public health design experience, including Revit, CAD, Thermal Modelling, etc.
As a senior, the candidate will assume a design lead position and be fully responsible for the mech design.
Job details:
Start Date ASAP
Working hours are from 8-5
Location will be on-site at Liverpool
Salary will be based on candidate’s skills and experience
Please apply with your most up to date CV and you will be contacted.....Read more...
Structural Engineer required for one of the UK's top Structural Steel company.They would aim for the candidate to have the following experience in design of building structures:
Structural Frame Design
Connection Design
Foundation Design
Temporary works (not essential)
Experience in using design software is essential.
Experience in delivering projects through the SER certification process would be beneficial.
CEng, MIStructE, MICE preferable however they can assist with mentoring should the candidate wish to work towards these professional qualifications.
Good communication skills are required with internal team and external clients.
A great package is being offered for the right person and depending on experience. If this is a role you feel you would be interested in, please apply with your most up to date CV.....Read more...
My clients in North Bucks have an immediate requirement for an Electronics Hardware Engineer / Firmware Engineer.This role is commutable from Milton Keynes, Newport Pagnell, St. Neots, Biggleswade, Sandy, Bedford. There is some flexibility for occasional work from home although candidates should expect to commute into the office three days each week. The role may involve occasional travel to meet with customers and support product deployment.My clients are a world leader in in the design, manufacture and continuous improvement of wireless condition monitoring solutions. Their technology is used in 35 countries in rail, construction and mining. More than 30,000 sensors were installed last year, helping users manage ground and structural movement, landslide risk, geotechnical behaviour, rail track movement and much more.They are on the lookout for a versatile and talented Electronics & Hardware Engineer, with a keen interest in firmware development, to join a robust multidisciplinary engineering team. The ideal candidate will have a broad skill set in electronics and hardware development, with a significant emphasis on firmware, and be enthusiastic about diversifying their expertise. This role involves a 60% focus on firmware and 40% on hardware tasks, requiring a strong foundation in electronic engineering principles, proficiency in firmware development, and the capability to innovate and tackle complex problems.Main Duties & Responsibilities:- Design, develop, and prototype electronic hardware systems with a focus on low power wireless solutions, balancing a 60/40 workload between firmware and hardware developments.- Lead the firmware development lifecycle from concept to deployment, including coding, debugging, and documentation.- Work closely with a strong multidisciplinary engineering team on exciting and challenging projects, ensuring seamless integration and alignment with product specifications and timelines.- Transform engineering challenges into marketable products quickly by leveraging expertise in low power wireless technology and creative problem-solving skills.- Mentor and guide both peers and juniors in their career progression, sharing knowledge and expertise in hardware and firmware development.- Conduct comprehensive testing and validation of hardware and firmware components to ensure product reliability, efficiency, and compliance with standards.Relevant Knowledge, Experience & Qualifications:Candidates should assess their suitability against the following essential and/or desirable relevant knowledge, experience & qualifications:Essential:- Bachelor’s or Master’s degree in Electrical Engineering, Electronics Engineering, or related fields (or equivalent experience).- Experience in electronics hardware design and firmware development, with a willingness to broaden skills across both areas.- Strong proficiency in programming languages such as C & Python.- In-depth experience with PCB design software (e.g., Altium Designer) and firmware development tools.- Solid understanding of microcontrollers, and peripheral interfaces (I2C, SPI, UART, etc.), with an emphasis on low power design.- Excellent problem-solving abilities, capable of working both independently and collaboratively within a team.- Effective communication and documentation skills, with the ability to convey technical information in a clear and concise manner.Desirable:-Any experience with wireless technologies (Cellular, Lora, Bluetooth) will be an advantage for this role.-Experience with certification processes (EMC, CE, FCC) will be considered an additional asset.- Familiarity with basic concepts of mechanical design will be advantageous.Package:Salary to c£60k, negotiable for a candidate with extremely well matched skills & experience.Workplace Pension Scheme with matched employer contributions.Life Assurance scheme.Cycle to Work Scheme.Tech Purchase Scheme.Learning & Development scheme including a variety of training courses.Flexible working hours.If you wish to showcase project(s) through a GitHub repository please provide the link on your CV.To apply for this Electronics Hardware Engineer / Firmware Engineer in North Bucks please contact us ASAP!....Read more...
My clients in North Bucks have an immediate requirement for an Electronics Hardware Engineer / Firmware Engineer.This role is commutable from Milton Keynes, Newport Pagnell, St. Neots, Biggleswade, Sandy, Bedford. There is some flexibility for occasional work from home although candidates should expect to commute into the office three days each week. The role may involve occasional travel to meet with customers and support product deployment.My clients are a world leader in in the design, manufacture and continuous improvement of wireless condition monitoring solutions. Their technology is used in 35 countries in rail, construction and mining. More than 30,000 sensors were installed last year, helping users manage ground and structural movement, landslide risk, geotechnical behaviour, rail track movement and much more.They are on the lookout for a versatile and talented Electronics & Hardware Engineer, with a keen interest in firmware development, to join a robust multidisciplinary engineering team. The ideal candidate will have a broad skill set in electronics and hardware development, with a significant emphasis on firmware, and be enthusiastic about diversifying their expertise. This role involves a 60% focus on firmware and 40% on hardware tasks, requiring a strong foundation in electronic engineering principles, proficiency in firmware development, and the capability to innovate and tackle complex problems.Main Duties & Responsibilities:- Design, develop, and prototype electronic hardware systems with a focus on low power wireless solutions, balancing a 60/40 workload between firmware and hardware developments.- Lead the firmware development lifecycle from concept to deployment, including coding, debugging, and documentation.- Work closely with a strong multidisciplinary engineering team on exciting and challenging projects, ensuring seamless integration and alignment with product specifications and timelines.- Transform engineering challenges into marketable products quickly by leveraging expertise in low power wireless technology and creative problem-solving skills.- Mentor and guide both peers and juniors in their career progression, sharing knowledge and expertise in hardware and firmware development.- Conduct comprehensive testing and validation of hardware and firmware components to ensure product reliability, efficiency, and compliance with standards.Relevant Knowledge, Experience & Qualifications:Candidates should assess their suitability against the following essential and/or desirable relevant knowledge, experience & qualifications:Essential:- Bachelor’s or Master’s degree in Electrical Engineering, Electronics Engineering, or related fields (or equivalent experience).- Experience in electronics hardware design and firmware development, with a willingness to broaden skills across both areas.- Strong proficiency in programming languages such as C & Python.- In-depth experience with PCB design software (e.g., Altium Designer) and firmware development tools.- Solid understanding of microcontrollers, and peripheral interfaces (I2C, SPI, UART, etc.), with an emphasis on low power design.- Excellent problem-solving abilities, capable of working both independently and collaboratively within a team.- Effective communication and documentation skills, with the ability to convey technical information in a clear and concise manner.Desirable:-Any experience with wireless technologies (Cellular, Lora, Bluetooth) will be an advantage for this role.-Experience with certification processes (EMC, CE, FCC) will be considered an additional asset.- Familiarity with basic concepts of mechanical design will be advantageous.Package:Salary to c£60k, negotiable for a candidate with extremely well matched skills & experience.Workplace Pension Scheme with matched employer contributions.Life Assurance scheme.Cycle to Work Scheme.Tech Purchase Scheme.Learning & Development scheme including a variety of training courses.Flexible working hours.If you wish to showcase project(s) through a GitHub repository please provide the link on your CV.To apply for this Electronics Hardware Engineer / Firmware Engineer in North Bucks please contact us ASAP!....Read more...
A Principal Engineer is required in an established Structural Steel company based in Shropshire.Role Overview:
The Principal Engineer will play a pivotal role in the technical aspects of bridge engineering projects and must have extensive expertise in structural analysis, design, and construction, ensuring the safe and efficient completion of bridge projects that meet all applicable standards and regulations.
The Principal Engineer will also mentor and guide junior engineers, fostering a culture of continuous learning and professional development within the team.
Key Responsibilities:
Lead the technical aspects of bridge engineering projects from concept to completion
Conduct comprehensive structural analysis and design for various bridge types, including concrete, steel, and composite bridges
Prepare and review technical documents, including plans, specifications, and estimates
Provide technical guidance and support to project managers and other team members
Manage engineering deliverables for projects, ensuring these are completed on time
Coordinate and collaborate with clients, sub-consultants, and other stakeholders
Where required provide oversight at construction phase, providing technical expertise and ensuring adherence to design specifications
Mentor and guide junior engineers, sharing knowledge and expertise to enhance their skills and professional development
Conduct training sessions and workshops to promote technical competency within the team
Identify and implement strategies to improve team performance and efficiency
Conduct thorough quality reviews of engineering calculations, designs, and documents
Adhere to BB-ENG-QC (Quality Control) procedure to ensure the accuracy and integrity of technical deliverables
Adhere to all applicable engineering standards, codes, and regulations
Stay abreast of the latest advancements in bridge engineering technologies and methodologies
Participate in professional development opportunities, such as conferences, workshops, and seminars
Job Requirements:
Degree in Civil Engineering or a related field
Chartered Engineer with the ICE or IStructE
Minimum of 7 years of experience in bridge engineering design and construction
Expertise in structural analysis and design software, such as AEC RSA, MIDAS, and IDEA StatiCa
Strong communication and interpersonal skills
Excellent leadership and mentoring abilities
Ability to work independently and as part of a team
Valid driver’s license
Ability to travel and work on-site as required
Proficient in Microsoft Office Suite and project management software
Package:
37.5 Hours of work per week
Competitive salary based on experience
25 days holiday + bank holidays
Additional birthday holiday
Medicash (Health Cash Benefit)
Company pension
Parking
Please apply with your most up to date CV and you will be contacted.....Read more...
An exciting Senior Embedded Software Engineer job opportunity has arisen, to join a team to design and develop software for a market leader in high quality special purpose machinery, based in Dorset, commutable from Weymouth, Dorchester, Poole, Bournemouth, Christchurch, Yeovil.
This Senior Embedded Software Engineer job is for someone who has a passion for engineering and ambition to work on a variety of complex electronic products. It also offers the opportunity to work on a variety of projects for industries such as medical and defence.
The Senior Embedded Software Engineer will join a well-established and expanding team of developers, in a friendly and social environment.
Key Skills and Requirements for the Senior Embedded Software Engineer job include:
Solid programming experience in C/C++
Experience working with bare metal embedded systems and real-time operating systems
Proven post-qualification working experience in embedded software development
Experience in the design and implementation of software from requirements through to production
Familiarity with software configuration management tools
Hands-on system engineering skills, including fault diagnosis.
This is a job for a Senior Embedded Software Engineer to join a company in Dorset that really care about their staff and offer fantastic internal and external training. They offer great benefits including hybrid working.
To apply for this job, or for more information on this Senior Embedded Software Engineer job in Dorset, please send your CV and covering letter to LPhillips@redlinegroup.Com, or for more information contact Lewis Phillips on 01582 878880 or 07961158784.....Read more...
As an Electronics Design Engineer, you will be at the forefront of this exciting journey, leading the charge in designing and developing the electronics and printed-circuit assemblies
Responsibilities:
Designing analogy and digital electronics and creating PCB layouts.
Collaborating with team members to plan PCB configurations.
Creating technical documents for PCB manufacturing.
Assisting subcontractors with PCB assembly and problem-solving.
Verifying hardware design and fixing issues using using oscilloscopes, spectrum analysers and other test equipment.
Cooperating with firmware developers.
Supporting product assembly, testing, and documentation.
Managing product EMC testing and compliance.
Key Skills:
Diploma or degree in electronics or related field.
At least 5 years of electronics and PCB design experience.
Minimum 2 years of recent experience with professional PCB design tools like Altium Designer or Cadence OrCAD/Allegro.
....Read more...
Role: Civil Engineer
Location: Dublin
Salary: Negotiable DOE
Our client are currently seeking a Civil Engineer with strong analytical skills for their Dublin office to work on a range of infrastructure, residential, commercial and industrial projects in Ireland. This is an ideal role for a high calibre Engineer with strong experience in the delivery of projects and with the ambition and potential to develop into a member of the senior management team, contributing to the effective management of the Company including participation in the planning and execution of its strategy with an opportunity to become an Associate Director following achieving agreed targets. The role will involve client relationship management with the retention of existing business and the generation of new business as high priorities.
Key responsibilities will include the following:
General
Implement Company policy.
Plan and manage project resources.
Undertake career planning and arrange for effective mentoring and training of employees under your direction.
Oversee compliance with Company’s Quality Management System.
Oversee compliance with Health and Safety practices by those under your direction.
Technical
Lead and promote design excellence within the business.
Delivery of sustainable engineering solutions to our public and private sector clients.
Confidently run multiple projects at various stages from concept through design, procurement, construction contract administration and handover with limited Director involvement.
Adopt appropriate design philosophy and develop concept design.
Prepare and review designs and design documentation.
Key Qualifications & Skills
Candidate must:
Have a Level 8 / 9 Degree in either Civil Engineering
Be a Chartered Engineer (CEng, MIEI / MICE or recognised equivalent).
Experience, preferably in consulting role(s).
Have a track record in the master-planning and delivery of roads and services infrastructure projects.
Be proficient in the application of the Design Manual for Urban Roads & Streets.
Possess good technical, communication and management skills.
Possess commercial astuteness, in terms of understanding and managing project budgets.
Have the ability to prepare high-quality project reports.
Be committed to CPD.
Benefits
Remuneration package (salary and pension contribution) commensurate with experience and reflective of the position.
Professional Body membership fees.
Continuous professional development and mentoring.
Group Health Insurance Scheme.
Flexible working hours.
Shorter working Friday.
Free off-street parking.
Stocked canteen.
An equal opportunities employer.
Our company culture promotes diversity and inclusion.
Due to the urgency of this vacancy, it is not possible for our client at this time to consider anyone without the appropriate work permits, visas or sponsorship's already in place. Therefore, we are unable to consider candidates who do not have full authorisation to work in Ireland. Applications submitted without the necessary visa in place will not be considered.
If the position above is of interest to you and you would like to know more, please call Marie today on 0830104097 in complete confidence.
MC
....Read more...
Senior Development Engineer – Drug Delivery Devices
Newton Colmore is partnered with a start-up medical devices company in London and we are helping them find a senior development engineer to join their research team.
As a Senior Development Engineer in this company, you will be working on a novel injectable drug delivery device and will help lead the design of this next-generation product into production.
Within this vital role for the company, you will be working with a multidisciplinary team and will play a pivotal role in the design and development process of this product. This will include designing robust mechanical solutions to a product within ISO 13485 standards.
The role will be based at their HQ in London and can be hybrid for the right candidate, although a preference is for someone to be in the office as often as possible, due to their start-up nature. It is a small team that you will be joining which is both versatile and tenacious in their pursuit of delivering a step-change to patients with their technology.
To succeed in this role, you will need strong fundamentals with mechanical engineering and have previous experience with drug delivery systems. Ideally this would be coupled with experience of the full design cycle, working on something from an idea, all the way through to readying the product for manufacture.
In exchange for your skills and expertise, the company offer a tailored salary and includes shares/equity, income protection and pension. This is a great opportunity to join a fledgling and well backed startup and help lead the design of a ground-breaking medical device.
We are looking to arrange interviews for this role as soon as possible so if the role is of interest make an application now. One of our consultants will then be in touch with more details.
Newton Colmore is a specialist recruiter dedicated to helping our medical devices and biotech clients find the experts they need to develop new technologies.
....Read more...
Senior Process Engineer to join a globally leading Chemical company based on one of their sites in the Blackpool area, on a permanent basis, for a salary of between £58,000 - £67,500 per annum. This competitive salary is supported by fantastic benefits package that includes a discretionary annual bonus, 14% employer pension contribution, share save scheme & hybrid working opportunities.
As the Senior Process Engineer you will be part of one of the world’s largest chemical manufacturers, who strive to bring transformational and sustainable solutions which address global material obstacles, every day, within a range of industries from Automotive and Aviation, to Medical and Electronics – creating smarter and more sustainable manufacturing solutions.
The Senior Process Engineer is accountable for providing relevant expertise to the production plants, alongside development and implementation of Capital and continuous improvement projects.
To be successful in this role as a Senior Process Engineer you will have proven experience delivering major capital projects on COMAH regulated plants, as well as having significant knowledge Plant Safety including hazard studies, functional safety, DSEAR and pressure relief. Additionally, you will have knowledge surrounding, and practical application of continuous improvement methods. For example, lean six sigma. The successful candidate will hold a degree within a Chemical Eng. discipline, as well as being Chartered.
Responsibilities of the Senior Process Engineer :
As the Senior Process Engineer , you will lead the design for capital projects, including optioneering, equipment specification and detailed design.
You will be responsible for the creation, checking and approval of relevant deliverables and vendor documents, such as (but not limited to) PFDs, mass energy balances, P&IDs, trip and interlock schedules and control philosophies.
Leadership of the input hazard studies, relief and blowdown studies, area classification reviews and LOPA reviews.
The Senior Process Engineer will be In charge of leading the commissioning of new equipment installed as part of projects to deliver beneficial operation, which will include, when required, the supervision of commissioning technicians and contractors.
Delivery of plant optimisation projects which will result in reduced operating costs and increased plant output.
Provide technical expertise to the operations team for troubleshooting and continuous improvement of the site operations, as well as optimisation of existing assets with respect to: throughput, yield, batch to batch repeatability, consistency and energy efficiency.
Support design, installation and commissioning to ensure capital projects, both major and minor, meet their SHE, quality, schedule and cost targets.
....Read more...
Our client is looking for an enthusiastic, dynamic and motivated individual to join the company as a Civil Engineer. The successful candidate will join our client, and will design a variety of infrastructure schemes on some of the largest and most prestigious developments in the Country in the following disciplines:
Highway design (S38 / S278) both preliminary and detailed.
Drainage design (S104 / S98) both strategic and detailed.
Design of foul pumping stations, SUDS, flow control structures and balancing facilities.
Residential and commercial external works design including earthworks assessments.
What you need to succeed:
Bachelor’s degree in Civil Engineering (or equivalent of).
Proficiency in Civil 3D, MicroDrainage, AutoCAD is required.
Minimum of 4 years’ experience.
Flow Experience of highway/drainage design associated with S278, S38, S104 agreements
Good communication and people skills
Ability to work well as part of a team
Experience of working with developers/contractors
....Read more...