Propulsion Test Engineer with mechanical fitting expertise required. This position involves overseeing the design implementation, conducting Hot Fire Testing programs.
Key Responsibilities
Support in test activities across all hot fire and environmental test facilities.
Ensure comprehensive understanding and knowledge of all aspects of the firing sites, including site preparation, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety.
Develop test, maintenance, and setup procedures for all test activities.
Requirements
Proficiency in mechanical fitting, preferably attained through completion of an apprenticeship or relevant experience within an engineering-oriented environment. Ideally holds qualifications equivalent to a graduate-level course in a related engineering field from OU or similar institutions. Must have undergone at least Level 4 training on the ....Read more...
Join a global engineering team driving the green energy transition. We are seeking a Lead Verification and Validation Engineer to take ownership of HVDC Control and Protection testing and validation activities, ensuring delivery on time and to the highest technical standards.
Key Responsibilities
Lead planning and coordination of Verification and Validation activities.
Develop and execute Factory System Test (FST) cases and support Factory Acceptance Tests (FAT).
Create HVDC system and plant models using PSCAD, RSCAD, or EMTP-RV.
Prepare control system requirements for RTDS lab setups.
Support commissioning teams and contribute to process and tool improvements.
Requirements
Degree in Electrical, Power Systems , Power Electronics Engineering (or equivalent).
Proven experience in HVDC Control and Protection design and verification.
Strong technical skills in PSCAD, RSCAD modelling and system behaviour analysis.
Leadership experience in managing validation teams.
....Read more...
A leading engineering and construction contractor is currently seeking a permanent Consultant Engineer to provide practical, buildable engineering solutions and support multidisciplinary project delivery from initial concept through to final completion. Salary: £55,000 – £70,000 per annum (DOE) Locations: Ayrshire, South Lanarkshire, Durham, Scarborough, Dorset, or West Yorkshire Working Arrangement: Office-based / Hybrid (with remote options considered depending on proximity to office hubs)Key Responsibilities:
Provide technical engineering consultancy support across early-stage and live projects.
Develop practical concept and detailed design solutions in line with relevant industry standards.
Review and verify technical submissions, calculations, and external design information.
Liaise with clients, architects, subcontractors, and multidisciplinary project teams.
Support pre-construction, tender, and project delivery stages.
Conduct comprehensive technical assessments, feasibility studies, and design reviews.
Contribute actively to value engineering and buildability improvements on site.
Attend client design meetings and present clear technical input to stakeholders.
Requirements:
Degree in Engineering (Civil, Structural, Mechanical, or a related discipline).
Proven experience working within a consultancy or contractor-side engineering environment.
Strong analytical, problem-solving, and technical report-writing skills.
Ability to communicate complex technical concepts clearly and effectively to non-technical stakeholders.
Experience working across multidisciplinary teams.
Chartered status (or actively working towards chartership) is highly desirable.
Benefits Package:
Paid overtime opportunities (where applicable).
Company pension scheme & comprehensive healthcare package.
Subsidised canteen and free on-site parking at selected locations.
Cycle to Work scheme.
Ongoing professional training and development.
Regular team-building events, awards ceremonies, and employee reward schemes.
Clear progression path into senior / pre-construction leadership roles.
If you are interested, please submit your CV for consideration.....Read more...
We are seeking a Senior Flight Software Engineer to join a high-performing engineering team working on cutting-edge space missions focused on the future sustainability of the space environment.
This role sits within a specialist Flight Software team responsible for developing embedded real-time software for advanced spacecraft systems, including next-generation missions designed to support satellite servicing and orbital debris removal.
This is an excellent opportunity for an experienced embedded software engineer looking to work on innovative, mission-critical space programmes and play a key role in shaping the future of in-orbit operations.
You will be responsible for the development of onboard flight software for satellite systems, working closely with multidisciplinary teams across systems, GNC, and computer vision.
The position covers the full software lifecycle, from requirements definition through to integration, verification, and testing.
Key Responsibilities
- Design, develop, and verify onboard flight software for spacecraft systems
- Collaborate with subsystem and system-level teams to define software requirements and solutions
- Contribute to and support design reviews, ensuring software compliance and performance
- Act as a subject matter expert in flight software development
- Support integration of Computer Vision and Guidance, Navigation & Control (GNC) software into the flight environment
- Contribute to knowledge sharing and provide technical input across engineering teams
Essential Requirements
- Degree in Computer Science, Software Engineering, or a relevant technical discipline
- Experience developing flight software for space applications
- Strong knowledge of ECSS standards for flight software
- Proven experience in real-time embedded software development (C/C++)
- Solid understanding of software development methodologies and embedded systems engineering
- Experience designing and implementing real-time systems
- Self-motivated, proactive, and able to take ownership while working collaboratively within a team
Desirable Skills
- Experience within the space sector or other safety-critical industries
- Development experience with VxWorks or RTEMS
- Familiarity with the full mission lifecycle (concept through to operations)
- Knowledge of UML and software modelling techniques
- Experience with spacecraft communication protocols (e.g. CCSDS, CAN, SpaceWire)
- Familiarity with cFS (Core Flight System)
- Experience with SPARC V8 or PowerPC architectures
- Linux development and system administration experience
- Scripting experience (e.g. shell, Python)
Whats on Offer
- Opportunity to work on cutting-edge space missions and technologies
- Flexible working arrangements, including hybrid options
- Optional compressed working schedule (e.g. 9/75 pattern)
- 25 days annual leave (increasing with service) + bank holidays
- Private healthcare and life insurance
- Long-term sick pay support
- Relocation support (where applicable)
- Visa sponsorship available (subject to eligibility)
- Modern office and engineering facilities
- Collaborative, supportive, and innovative working environment
- Regular team and social events
TT....Read more...
Data Platform Engineer – Leading UK Enterprise – Milton Keynes (Hybrid - 3 times a month in office)
(Tech stack: Data Platform Engineer, Cloud (Azure/AWS/GCP), Microsoft Fabric, SQL Server, Platform as Code, Terraform, GitHub, Data Platform, Monitoring, Observability)
Our client is a leading UK enterprise investing heavily in its technology landscape as part of a large-scale transformation programme. They are seeking a talented Data Platform Engineer to join their growing team in Milton Keynes. This is an exciting opportunity for a Data Platform Engineer to work with modern technologies including Microsoft Fabric and Terraform, helping to build and scale a best-in-class Data Platform.
As a Data Platform Engineer, you will play a key role in designing, building and maintaining a robust Data Platform within Cloud (Azure/AWS/GCP) environments. The successful Data Platform Engineer will collaborate with technical specialists and third-party providers, leveraging Microsoft Fabric and Terraform to deliver secure, scalable and highly available solutions.
Data Platform Engineer applicants should have strong experience with Cloud (Azure/AWS/GCP), alongside hands-on expertise in SQL Server and modern Data Platform technologies such as Microsoft Fabric. Experience with Platform as Code approaches using Terraform and version control tools like GitHub is highly desirable for any Data Platform Engineer.
In this role, the Data Platform Engineer will be responsible for maintaining and optimising the Data Platform, using Microsoft Fabric to support analytics and data workloads, while deploying infrastructure through Terraform. You will ensure high availability across Cloud (Azure/AWS/GCP) environments, undertaking incident management and root cause analysis in line with SLAs. The Data Platform Engineer will also apply Platform as Code principles with Terraform to improve automation and consistency.
The Data Platform Engineer will contribute to capacity planning, monitoring and observability, ensuring the Data Platform performs effectively. You will work with Microsoft Fabric to enhance platform capabilities, while using Terraform to manage scalable infrastructure. Operating within Cloud (Azure/AWS/GCP) design patterns, the Data Platform Engineer will support both legacy and modern systems.
This is a fantastic opportunity for a Data Platform Engineer to join a collaborative and forward-thinking environment where innovation is encouraged. You will deepen your expertise in Microsoft Fabric, expand your knowledge of Terraform, and work on enterprise-scale Data Platform solutions within Cloud (Azure/AWS/GCP) environments.....Read more...
Duties will include, but will not be limited to:
Design exhaust systems as per the requirements specified by the project team.
Engineer stainless steel sheet metal products with a focus on ease of manufacturing.
Deliver feedback to the wider group that drives continuous improvements within Eminox.
Support implementation GD&T principles into our drawings and designs.
Training:
The Apprentice will work towards their Apprenticeship Standard in L3 Engineering Fitter.
The successful candidate will be assigned a dedicated assessor who will provide support and guidance throughout the course.
This is a Day Release programme, which means you will attend Lincoln College, 1 day per week, term time only. This will fall within your contracted working hours.
Training Outcome:On successful completion, you could progress into a role such as Engineering Designer, with opportunities to specialise further within design and development.Employer Description:Eminox designs and manufactures exhaust after-treatment systems, reducing emissions from heavy-duty vehicles and equipment.Working Hours :Monday to Thursday 8:30am to 5:00pm. Friday 8:30am to 4:00pm.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Creative,Initiative,Patience,Physical fitness....Read more...
Quality Engineer – Cambridge – Medical Devices
We are currently looking for a Quality Engineer for a growing Medical Devices organisation based in Cambridge. The company work on a range of different Medical Devices, providing a variety of projects and tasks in your role.
You will collaborate various Medical Devices experts, including Mechanical Engineers, Physicists, Electronics Engineers, Software Engineers, and other professionals. Your primary focus will be on Quality Assurance of Medical Devices to ISO 13485 standards, although knowledge of EN 60601 would also be advantageous.
Your responsibilities will include creating technical files and testing documentation. If you have experience of Design Assurance, this would also enhance your approach to this work.
We would expect you to have a degree that led you into a Medical Devices Quality Engineering career. However. if you have another route into a Medical Devices role, we would still be keen to hear from you.
In addition to working on various Medical Devices, you will be rewarded with an excellent starting salary, a bonus, a generous pension, life assurance, healthcare, and other excellent benefits.
Given the anticipated interest in this role, if you are looking for a new opportunity, I suggest making an application now to avoid missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment, Science recruitment and Biotech recruitment specialists Newton Colmore Consulting, on +44 121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you.....Read more...
Join a well-established biotech company using large-scale genetic data and AI to predict disease risk and advance precision healthcare.
We're looking for a Threat Detection Engineer who thrives on innovation and technical ownership. This role is not a traditional SOC position, you'll focus on building high-impact detection capabilities, shaping how security protects sensitive genomic and AI-driven data at scale.
This role offers hybrid / remote working options, a salary range of £60,000 - £80,000 and benefits.
Why This Role is Exciting
? High autonomy: Lead projects from idea to deployment
? Innovation-driven: Develop cutting-edge detections beyond standard SIEM rules
? Collaborative: Work closely with internal teams and an outsourced SOC partner
? Mission-focused: Protect critical healthcare data that supports precision medicine
Key Responsibilities
? Design and develop threat-led detections using threat intelligence and threat-hunting outputs
? Create novel analytic techniques for incident detection
? Collaborate with an MSP SOC to maintain and tune the detection catalogue
? Build automated reporting dashboards using Microsoft Sentinel workbooks
? Support security initiatives including ISO 27001 activities and KQL-based tasks
? Ensure monitoring coverage across cloud platforms, SaaS apps, and internal systems
? Contribute to documentation of processes, tools, and detection logic
What You'll Bring
Must-Have Skills & Experience:
? Previously worked as a Threat Detection Engineer or in a similar role.
? Strong proficiency in KQL and hands-on experience with Microsoft Sentinel
? Familiarity with Microsoft Defender tools (Endpoint & O365)
? Exposure to Azure cloud logging and Kubernetes environments
? Knowledge of attacker TTPs and MITRE ATT&CK frameworks
? Proactive, collaborative, and innovative mindset
Desirable / Nice-to-Have:
? Experience with Python, Terraform, or CI/CD pipelines
? Familiarity ....Read more...
R&D Consultant – Drug Delivery Device Design – Cambridge
We are seeking an R&D Consultant to lead the design and development of next‑generation Drug Delivery Devices, working at the intersection of technical innovation, human‑centred design and strategic consultancy.
Based in Cambridge, you will guide multidisciplinary teams of engineers, scientists and designers as they create industry‑defining medical technologies. Your focus will be on shaping early‑stage concepts, driving rigorous R&D activities, and ensuring that device architectures, mechanisms and usability considerations translate into robust, manufacturable solutions.
Alongside leading programmes, you will remain deeply hands‑on throughout project delivery. You will contribute to concept generation, prototyping, experimental design, verification planning and risk management, while also supporting clients in navigating technical decisions and development pathways. Experience mentoring or developing junior colleagues will be highly valued, as you will play a key role in strengthening the team’s technical capability.
You will have begun your career in the Medical Devices sector as an engineer or designer directly involved in the creation of new devices from concept through development. You may have progressed into a consultancy, technical leadership or client‑facing role where you shaped project direction, advised stakeholders and translated complex technical challenges into actionable development strategies.
This position centres on delivering high‑value expertise rather than a physical product. Key strengths include R&D leadership, device design, programme management, client engagement and a strong understanding of Drug Delivery technologies and regulatory expectations for combination products.
The organisation offers an excellent salary and benefits package, enabling you to focus on impactful, technically challenging work. Benefits include enhanced pension, life assurance, medical insurance and a range of additional perks associated with a well‑established, innovation‑driven company.
Candidates I have previously placed with this organisation have enjoyed exceptional technical growth and career progression. Several have even gone on to lead spin‑out ventures — a rare and exciting opportunity for those with entrepreneurial ambition.
I anticipate strong interest in this position, so if your background aligns with the above, I recommend applying promptly.
To discuss this opportunity further, contact Andrew Welsh, Director of Medical Devices, Biotech and DeepTech Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your CV and a member of our team will be in touch to discuss next steps.....Read more...
Data Engineer – FinTech – Newcastle
(Tech stack: Data Engineer, SQL, Python, AWS, Git, Airflow, Data Pipelines, Data Platforms, Programmer, Developer, Architect, Data Engineer)
Our client is a trailblazer in the FinTech space, known for delivering innovative technology solutions to global financial markets. They are expanding their engineering capability in Newcastle and are looking for a talented Data Engineer to join their team. This role will focus on building and optimising systems that make complex datasets accessible, reliable, and valuable for the business.
As a Data Engineer, you will take responsibility for the development of high-quality pipelines that process and manage large volumes of data from a range of external and internal sources. You’ll play a key role in enhancing and maintaining their central data platform, ensuring the smooth delivery of information that supports investment decision-making. Working closely with stakeholders across the business, you’ll help shape how data is accessed, tested, and leveraged to maximise value.
The successful candidate will bring:
3–6 years of relevant experience working as a Data Engineer (or in a closely related role).
A 2:1 or above in Computer Science (or related field), ideally from a Russell Group university.
Direct experience in the hedge fund sector (essential).
Strong ability to design and build data pipelines that integrate multiple data sources.
Proficiency in SQL and Python, with solid exposure to AWS or other cloud-based data tools.
Familiarity with version control systems such as Git and workflow/orchestration tools such as Airflow.
Proven ability to test and troubleshoot data systems, with a track record of improving reliability and accuracy.
Excellent communication skills, with the ability to collaborate effectively in a team environment.
A detail-oriented, proactive mindset, with a willingness to learn and apply new technologies.
This is an exciting opportunity to join a forward-thinking organisation where data is at the core of their success. You’ll be part of a collaborative environment where your work will directly support world-class FinTech solutions.
Location: Newcastle, UK (Fully Office Based)
Salary: £45,000 - £80,000 + Bonus + Benefits
Applicants must be based in the UK and have the right to work in the UK.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKTECHREC
NOIRUKREC....Read more...
Hot Fire Space Thruster Test Engineer required join a very busy space thruster test facility focusing on Hot Fire Testing programmes. The ideal candidate will understand space thruster theory particularly the ground test of thrusters for the design and manufacture of liquid propellant and high pressure gas feed systems.
You will have an input to Research and Development and other space propulsion related activities so need to be proficient in analysing and assessing test data including collation and analysis then presentation graphs, tables, etc.
Requirements
Space thruster Knowledge
Understand propellant MIL spec analysis, Military Standard Propellants
Chemical laboratory techniques and processes
Mechanical fitter/practical engineering skills preferably gained from an apprenticeship or from within an engineering related organization.
Responsibilities
Site preparation and maintenance
Fuel and oxidiser handling
Pressure systems
Instrumentation
Control systems
Space thruster theory
Steam boiler operation
Data analysis
Site and system safety....Read more...
Hot Fire Space Thruster Test Engineer required join a very busy space thruster test facility focusing on Hot Fire Testing programmes. The ideal candidate will understand space thruster theory particularly the ground test of thrusters for the design and manufacture of liquid propellant and high pressure gas feed systems.
You will have an input to Research and Development and other space propulsion related activities so need to be proficient in analysing and assessing test data including collation and analysis then presentation graphs, tables, etc.
Requirements
Space thruster Knowledge
Understand propellant MIL spec analysis, Military Standard Propellants
Chemical laboratory techniques and processes
Mechanical fitter/practical engineering skills preferably gained from an apprenticeship or from within an engineering related organization.
Responsibilities
Site preparation and maintenance
Fuel and oxidiser handling
Pressure systems
Instrumentation
Control systems
Space thruster theory
Steam boiler operation
Data analysis
Site and system safety....Read more...
The Manufacturing Engineer is responsible for complex electronic assemblies. Perform the lead role in the implementation of LEAN manufacturing processes and use of Six Sigma tools.
You will become an expert in the manufacturing processes, train shop floor personnel and monitor key metrics. Also solve complex manufacturing problems and take an active role in troubleshooting quality and production yield related issues within manufacturing.
Key skills
Min BSc or BEng in Electrical, Electronic, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Role responsibilities
Lean Six Sigma, responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality, responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues. ....Read more...
The Manufacturing Engineer is responsible for complex electronic assemblies. Perform the lead role in the implementation of LEAN manufacturing processes and use of Six Sigma tools.
You will become an expert in the manufacturing processes, train shop floor personnel and monitor key metrics. Also solve complex manufacturing problems and take an active role in troubleshooting quality and production yield related issues within manufacturing.
Key skills
Min BSc or BEng in Electrical, Electronic, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Role responsibilities
Lean Six Sigma, responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality, responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues. ....Read more...
We are looking for an Electromechanical Production Engineer to optimise and support manufacturing processes, ensuring efficient production, product quality, and continuous improvement within an electromechanical production environment. This role acts as the key link between Design and Manufacturing, particularly for New Product Introduction (NPI).
Key Responsibilities
Develop, implement, and optimise production processes, work instructions, and test procedures.
Support NPI, running pilot builds, and transitioning products to full-scale manufacturing.
Maintain and troubleshoot production equipment, tooling, and fixtures.
Work with Quality Engineering to define inspection methods, investigate defects, and implement corrective actions.
Lead continuous improvement initiatives using Lean, Six Sigma, and Kaizen methodologies.
Provide day-to-day support and training to production staff.
Requirements
Two or more years of experience in production engineering, process engineering, or manufacturing support.
Experience with electromechanical assemblies (motors, sensors, PCBs, actuators, wiring).
Familiarity with Lean manufacturing, quality tools (FMEA, SPC, 8D), and ERP and MRP systems.
Strong analytical, problem-solving, and communication skills.
Experience in high-mix or low-volume manufacturing environments.....Read more...
We are looking for a Maintenance Engineer to join a cutting-edge aerospace manufacturing facility. Your role will encompass the maintenance, repairs, and enhancements of the production plant, covering both building and equipment.
Your responsibilities will involve addressing issues with office-based equipment and maintaining precision engineering research and design facilities, which include hazardous chemicals and high-pressure gas systems. The ideal candidate should possess a pragmatic mindset and have practical experience in welding and a variety of maintenance areas, including carpentry, electrical work, HVAC systems, plumbing, compressor and boiler maintenance, vehicle upkeep, and machine shop fabrication.
You should have experience in:
Plumbing, carpentry, and fabrication
Familiarity with hand and electrical tools
Knowledge of machine shop equipment like lathes, band/chop saws, pillar drills, and grinders
Welding and fabrication skills, preferably holding at least a City and Guilds Level 2 certification, with Level 3 or similar structural welding qualifications being advantageous. ASME certification is a plus.
Previous experience in facilities maintenance or engineering fabrication settings
....Read more...
We are looking for an Electromechanical Production Engineer to optimise and support manufacturing processes, ensuring efficient production, product quality, and continuous improvement within an electromechanical production environment. This role acts as the key link between Design and Manufacturing, particularly for New Product Introduction (NPI).
Key Responsibilities
Develop, implement, and optimise production processes, work instructions, and test procedures.
Support NPI, running pilot builds, and transitioning products to full-scale manufacturing.
Maintain and troubleshoot production equipment, tooling, and fixtures.
Work with Quality Engineering to define inspection methods, investigate defects, and implement corrective actions.
Lead continuous improvement initiatives using Lean, Six Sigma, and Kaizen methodologies.
Provide day-to-day support and training to production staff.
Requirements
Two or more years of experience in production engineering, process engineering, or manufacturing support.
Experience with electromechanical assemblies (motors, sensors, PCBs, actuators, wiring).
Familiarity with Lean manufacturing, quality tools (FMEA, SPC, 8D), and ERP and MRP systems.
Strong analytical, problem-solving, and communication skills.
Experience in high-mix or low-volume manufacturing environments.....Read more...
We are looking for a Maintenance Engineer to join a cutting-edge aerospace manufacturing facility. Your role will encompass the maintenance, repairs, and enhancements of the production plant, covering both building and equipment.
Your responsibilities will involve addressing issues with office-based equipment and maintaining precision engineering research and design facilities, which include hazardous chemicals and high-pressure gas systems. The ideal candidate should possess a pragmatic mindset and have practical experience in welding and a variety of maintenance areas, including carpentry, electrical work, HVAC systems, plumbing, compressor and boiler maintenance, vehicle upkeep, and machine shop fabrication.
You should have experience in:
Plumbing, carpentry, and fabrication
Familiarity with hand and electrical tools
Knowledge of machine shop equipment like lathes, band/chop saws, pillar drills, and grinders
Welding and fabrication skills, preferably holding at least a City and Guilds Level 2 certification, with Level 3 or similar structural welding qualifications being advantageous. ASME certification is a plus.
Previous experience in facilities maintenance or engineering fabrication settings
....Read more...
Senior Quality Engineer – Cambridge – Medical Devices
We are currently looking for a Senior Quality Engineer for a growing Medical Devices organisation based in Cambridge. The company work on a range of different Medical Devices, providing a variety of projects and tasks in your role.
You will collaborate various Medical Devices experts, including Mechanical Engineers, Physicists, Electronics Engineers, Software Engineers, and other professionals. Your primary focus will be on Quality Assurance of Medical Devices to ISO 13485 standards, although knowledge of EN 60601 would also be advantageous.
Your responsibilities will include creating technical files and testing documentation. If you have experience of Design Assurance, this would also enhance your approach to this work.
We would expect you to have a degree that led you into a Medical Devices Quality Engineering career. However. if you have another route into a Medical Devices role, we would still be keen to hear from you.
In addition to working on various Medical Devices, you will be rewarded with an excellent starting salary, a bonus, a generous pension, life assurance, healthcare, and other excellent benefits.
Given the anticipated interest in this role, if you are looking for a new opportunity, I suggest making an application now to avoid missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment, Science recruitment and Biotech recruitment specialists Newton Colmore Consulting, on +44 121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you.....Read more...
Full Stack Software Engineer – Advanced Manufacturing Technology – St. Gallen / Hybrid
(Key skills: .NET Developer, C#, .NET Core, .NET 8/9/10, React, TypeScript, REST APIs, Full Stack Development, Microservices, Docker, MongoDB, DevOps, Agile, Industrial Technology, .NET Developer)
Are you a passionate Full Stack Software Engineer looking to work on cutting-edge software that powers next-generation industrial technology? Do you enjoy building scalable applications in environments where innovation, collaboration and engineering excellence are central to success? This is an exciting opportunity to join a globally recognised advanced manufacturing technology business developing intelligent software platforms used across highly sophisticated engineering environments worldwide.
Our client is seeking a Software Engineer Full Stack to join its growing development team in St. Gallen. In this role, youwill design, develop and maintain modern applications using C# and .NET 10, while also building high-performance web frontends using React and TypeScript. Working across the full software development lifecycle, you will translate technical requirements into scalable and maintainable software solutions that directly support innovative additive manufacturing technologies.
You will play a key role in shaping new product features and evolving the wider software architecture, contributing to longterm platform innovation and technical direction. Working within Agile teams, you will collaborate closely with highly skilled engineers across the wider organisation, helping drive modern software engineering standards and scalable development practices. Experience with REST APIs, microservices, Docker, MongoDB and DevOps pipelines will be highly beneficial, alongside a proactive mindset and passion for continuous improvement.
This is an outstanding opportunity to join a collaborative, innovation-led engineering environment where your work will directly contribute to market-leading industrial technology solutions. The company offers excellent professional development opportunities, exposure to cuttingedge engineering projects and the chance to work on software that is shaping the future of advanced manufacturing.
Location: St. Gallen, Switzerland / Hybrid working
Salary: CHF 100,000 – CHF 110,000 + Benefits
Language: Minimum of C1 German (spoken and written)
Applicants must have the right to work in Switzerland.
NOIRSWITZERLANDREC
NOIREUROPEREC
NOIREURNET
....Read more...
Site inspection / survey work
Technical and CAD drawings (Computer Aided Design)
Assisting with design and general office duties
Assisting project managers to deliver project work
Attend meetings and represent the company
Training:
BEng (Hons) Civil Engineering
Day release delivery at ARU's Chelmsford campus
Training Outcome:You will be considered a permanent employee with Haydn Evans and upon successful completion of your degree, will be promoted to the role of civil engineer. As an approved provider of the ICE training scheme, we will be in a position to provide full training and support to help you achieve professional status. As a company we recognise and reward those individuals who show an aptitude for progression. Anybody who has the drive, motivation, and right attitude to achieve, will be provided with opportunities to progress within the company.Employer Description:Haydn Evans Consulting Limited is an engineering design consultancy founded in 2000 and has, in recent years experienced exponential growth, necessitating a move to newly refurbished premises in 2021. Our company values sit at the heart of everything we do, allowing us to deliver outstanding consultancy services to our clients and achieve Engineering Technical Excellence on each and every project. We recognise that our team of individuals are key to this success, we place great value on individual professional development and progression whilst actively promoting and supporting positive health and wellbeing. We became and Employee Owned Trust (EOT) in 2023, providing more security for employees and ensuring that individuals are actively involved in decision making.
We work across a broad range of sectors carrying out inspections and examinations of structures and infrastructure, designing repairs and designing new structures/infrastructure. A brief summary of each sector:
Structures – Concept designs, superstructure design, Building Information Modelling (BIM), site inspections and structural surveys. We work with a range of clients across health, hospitality and leisure, commercial, education and defence.
Marine – Inspecting jetties, piers, and berths, assessing and designing repairs to existing marine infrastructure, coastal erosion protection measures. We are proud to have designed some high-profile projects, most notably, the refurbished pleasure pier at Felixstowe.
Rail – Working with Train Operators, asset owners and contractors – surveying/inspecting structures and assets (i.e buildings/canopies at stations), designing repairs to existing assets, designing new build assets and providing emergency/reactive support.
Civils/infrastructure – Highway infrastructure design, feasibility for new schemes, assessment, inspection and reporting, design of repairs for existing structures, design of new build highway structures and drainage design.
Pre-planning – We carry out Flood Risk Assessments, flood warning evacuation planning, soakaway testing, surface water management plans.Working Hours :Monday - Friday 9.00am - 5.00pm, with occasional weekend / night working.Skills: Communication skills,Organisation skills,Problem solving skills,Number skills,Team working....Read more...
Service Engineer (Industrial Refrigeration)Doncaster / EnglandStep into a hands-on Service Engineer role with a sustainability-led industrial refrigeration specialist, working across the UK with the backing of three decades of European engineering heritage.A well established European manufacturer of advanced industrial refrigeration systems is expanding its UK service operation and looking for an experienced Service Engineer to join the team. With more than thirty years of design and manufacturing expertise behind it, the business has built its reputation on natural refrigerant technology, supporting clients across food production, logistics and process industries as they move towards lower-carbon, more energy-efficient operations. Every system installed is paired with a 24/7 remote monitoring platform that tracks performance live and flags issues before they affect the customer.This is a full-time, on site Service Engineer position based in England, with the Doncaster area being the ideal home base given the geographic spread of clients. You will be the face of the business in the field - diagnosing faults, carrying out planned maintenance, completing repairs and keeping mission-critical refrigeration plant running at peak performance.The roleReporting into the UK service operation, the Service Engineer will own the day-to-day technical wellbeing of installed systems across customer sites. Expect a varied schedule of reactive callouts, scheduled servicing and commissioning support, with full back-up from the European engineering team and access to live data through the remote monitoring platform.Here's what you'll be doingDiagnosing and resolving technical faults across industrial refrigeration systems, including ammonia plantCarrying out planned preventative maintenance to keep units running efficiently and safelyAttending breakdown callouts and completing on-site repairs to a high standardSupporting installations, commissioning and performance testing of new equipmentWorking alongside the remote monitoring team to interpret data and act on alertsCommunicating clearly with clients on-site, explaining work carried out and any follow-up requiredMaintaining accurate service records, job sheets and compliance documentationHere are the skills you'll needMinimum three years' experience in industrial machinery manufacturing or industrial refrigeration serviceHands-on experience with ammonia refrigeration systemsAmmonia handling certificate is essential - this is a non-negotiable requirementStrong fault-finding and troubleshooting ability across mechanical, electrical and control systemsConfidence working independently, managing your own diary and prioritising calloutsClear communication skills for client-facing technical conversationsA full, valid UK driving licenceRelevant technical qualifications or industry certifications would be advantageousWork permissionsYou must have the right to work in the United Kingdom. Visa sponsorship is not available for this Service Engineer position.Key perks and benefitsCompetitive salary reflecting experience and certifications heldCompany vehicle for service work across the UKThe chance to work with cutting-edge natural refrigerant technology backed by an established European manufacturerOngoing technical training and exposure to advanced refrigeration platformsDirect collaboration with the engineering team based in mainland EuropeGenuine progression potential as the UK operation continues to growWhy a career in industrial refrigeration mattersIndustrial refrigeration sits at the heart of the UK's food supply, logistics and process manufacturing sectors, and the shift towards natural refrigerants is reshaping the industry as carbon reduction targets bite. Engineers with ammonia experience are in increasingly short supply, which makes this Service Engineer role a strong long-term move both financially and in terms of relevance. Joining a manufacturer rather than a third-party contractor gives you deeper product knowledge, factory-level technical support and a clearer route into senior service, commissioning or technical leadership positions over time.This Service Engineer opportunity in the Doncaster area is brought to you by The Opportunity Hub UK - connecting skilled engineering professionals with employers shaping the future of sustainable industry.....Read more...
Duties will include but not limited to:
Produce accurate Civil Engineering drawings for a variety of buildings and site developments using Revit and Civil 3D
Convert architectural layouts and design concepts into detailed Civil Engineering drawings
Work collaboratively with CAD technicians, engineers and the wider design team to deliver project information within agreed deadlines
Integrate Civil Engineering models with architectural, structural and M&E designs
Review drawings from other disciplines and report discrepancies or required revisions to the Engineer
Coordinate with other teams to ensure completeness, accuracy and quality of project drawings
Assist in organising and issuing Civil Engineering drawings and related information
Training:Training will take place both in the workplace and at college. You will attend Future Skills College one day per week for your formal training.Training Outcome:Gaining the experience of working with a busy practice will give any apprentice the practical tools they need in their future career and the confidence to work for and alongside engineers and technicians at all levels.Employer Description:Heyne Tillett Steel is an award-winning structural and civil engineering practice with a reputation for intelligent design and innovative, practicalsolutions. Based in central London and established in 2007 by directors Andy Heyne, Mark Tillett and Tom Steel, the practice now hasover 180 people. We are currently working on exciting and innovative projects throughout the UK for many of the leading developers andarchitects.
Heyne Tillett Steel is an employee-owned business. We are committed to the development and success of our staff and maintaining theethos of the practice. If you want to be part of a young, friendly and dynamic team, then we want to hear from you.Working Hours :Monday-Friday - 09:00-17:30.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Number skills,Analytical skills,Team working,Initiative,Punctual & Present,Focused & Reliable,Sociable,Keen to Learn....Read more...
Flexi-Time, 33 Holidays, Frequent Work Events/Socials and State-Of-The-Art-Facilities and an attractive pension contribution are just a few of the benefits that the Product Quality Engineer will enjoy whilst working with this impressive engineering organisation.Established over 100 years ago, this highly impressive engineering organisation has become a vital partner to their high profile clientele. Operating out of a state-of-the-art manufacturing facility, they currently employ over 120 people and produce bespoke high-end products for use in a variety of industries and types of facilities.This employer is based in LEEDS, meaning that the successful Product Quality Engineer will easily be able to commute from surrounding towns and cities including Bradford, Dewsbury, Huddersfield, Halifax, Wakefield, Castleford, Pontefract, Bingley and Keighley.Key Responsibilities of the Product Quality Engineer will include:
Develop, implement and maintain in process quality control plans and ISO 9001 aligned procedures across all major transformer manufacturing stages, ensuring full compliance with customer specifications.
Conduct inspections, tests and audits to detect non conformities early, driving timely corrective actions and maintaining robust product quality standards.
Lead structured root cause analysis using 8D, Ishikawa, MSA, SPC and FMEA, ensuring the identification of systemic issues and validation of long term corrective actions.
Collaborate with Production, Engineering and Supply Chain to resolve quality issues, improve process capability, reduce scrap/rework and support qualification of new materials and processes.
Analyse engineering drawings, technical data and quality KPIs to identify trends, guide improvements and contribute to lean manufacturing and continuous improvement initiatives.
Support Factory Acceptance Testing (FAT), maintain all quality documentation, ensure full material traceability and assist with customer audits, third party inspections and certification activities.
Work with Design Engineering on manufacturability, provide quality training to production teams, and support supplier investigations and improvements to ensure consistent material and component conformity.
For the Product Quality Engineer, we are keen to receive applications from individuals who possess:
Apprenticeship, HND, Degree or equivalent technical background in Electrical, Mechanical, Industrial Engineering or a related manufacturing discipline.
3–5 years’ quality engineering experience within mechanical/electrical manufacturing
Solid working knowledge of ISO 9001 and practical experience with quality management systems.
Proficient in structured problem solving tools such as FMEA, 8D, SPC, MSA and root cause analysis.
Strong analytical ability with proven experience interpreting engineering drawings and technical specifications.
Salary and benefits:
Up to £45,000 (depending on experience)
Flexible working hours (37.5 Hours per week)
4-Hour minimum day (2hrsxAM & 2xhrsPM)
Monday to Thursday – 08:15am to 17:00pm
Friday - 08:15am to 12:45pm
33 days Annual Leave including Bank Holidays
10% Combined Pension
To apply for the Product Quality Engineer role, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Alex Feather at E3 Recruitment for more information.....Read more...
Project Engineer Derby £50,000 – £55,000 + Excellent Benefits!
Top Benefits:
Up to 10% employer pension contribution
Private medical insurance + occupational health support
Bonus scheme & life assurance (4x salary)
Generous holiday allowance that increases with service (plus bank holidays)
Electric vehicle & cycle-to-work salary sacrifice schemes
The Company
Join a globally recognised manufacturing organisation at the forefront of advanced materials innovation. Supplying into industries such as automotive, construction, and consumer goods, the business is known for its commitment to sustainability, engineering excellence, and continuous improvement. The Derby site is a key hub for capital investment and operational development.
The Role
An exciting opportunity has arisen for an experienced Project Engineer to take ownership of capital projects across mechanical systems, site utilities, and infrastructure. Reporting to the CAPEX Leader, you will manage projects end-to-end — from concept and design through to installation and commissioning.
Key Responsibilities
Support long-term CAPEX planning, including project selection and prioritisation
Develop engineering solutions in collaboration with key stakeholders
Produce cost estimates (±30% early stage, ±10% detailed)
Lead Management of Change (MOC) processes
Manage contractor selection and vendor engagement
Oversee full project lifecycle: design, construction, commissioning
Ensure high standards of safety, quality, and delivery performance
Maintain full technical documentation (P&IDs, SOPs, SLDs, etc.)
Track budgets, control costs, and report on financial performance
About You
5+ years’ experience in a Project Engineering role (industrial/manufacturing environment)
Strong knowledge of steam systems and process pipework
Mechanical qualification (HNC/HND/City & Guilds or equivalent)
Experience with ATEX environments (desirable)
IOSH or NEBOSH qualified (or working towards)
Proven contractor and stakeholder management experience
CAD and SAP experience preferred
Strong IT skills (Microsoft Office)
Additional Benefits
Enhanced maternity, paternity & neonatal pay
Paid emergency dependants, carers, and bereavement leave
Employee Assistance Programme (mental health, legal & financial support)
Career development, training, and tuition support
Inclusive workplace with active employee networks
Health surveillance, company sick pay & annual flu vaccinations
Requirements
Able to commute to Derby (DE21)
Right to work in the UK (no sponsorship available)
....Read more...
