Microwave Antenna and RF Design Engineer required to join an RF Microwave module design, development, test as well as antenna design, modelling and requirement translation.
Requirements
Microwave frequency PCB Design experience
RF system design knowledge of cascade analysis or receiver to transmitter performance
High Power RF amplifier, Low Noise Amplifiers, Limiters, Circulators, Filters, Mixers, Phase Locked Loop usage design, build and test.
Antenna theory and design with array antennas slotted array and printed antennas.
Altium, Altair, digital electronics, power electronics etc. beneficial.
Responsibilities
Antenna and RF equipment design, development and delivery.....Read more...
We are partnered with a growing product development business in Newbury, Berkshire, designing and developing innovative electronic products for customers across a range of industries.
As part of their continued growth, they are looking for an experienced Audio Electronics Engineer to join their engineering team, working across the full product development lifecycle from initial concept and design through to prototyping, testing and production.
In this Audio Electronics Engineer role, you will:
Design and develop analogue and digital electronics, with a focus on audio applications
Take designs through schematic capture, PCB development, prototyping and testing
Carry out hardware debugging, fault finding and performance analysis
Work closely with other engineers to develop, test and improve products through to production
The ideal Audio Electronics Engineer will have:
Commercial, hands-on experience in electronics product development
Proven experience designing audio electronics, ideally including analogue signal paths, amplifiers, codecs or ADCs and DACs
Strong schematic and PCB design skills using Altium or similar
Experience with embedded systems, microcontrollers and digital communication interfaces
This is an excellent opportunity to join a growing engineering team working on a varied range of product development projects. You'll have the opportunity to take ownership of your designs, work across different stages of development and develop your technical skills alongside experienced engineers.
The role is site-based in Newbury, Berkshire.
If you're interested in this Audio Electronics Engineer role in Newbury, Berkshire, apply now or contact Ed at efrost@redlinegroup.Com or 01582 878819 for more information.....Read more...
Product Design Mechanical Engineer – Medical Device – Warwick
A growing Medical Devices company, located in Warwick, is currently seeking an experienced Product Design Mechanical Engineer to contribute to the development of various Medical Devices.
As part of a team of engineering experts, including physicists, electronics engineers, scientists, and other specialists in Medical Devices, you will play a pivotal role in working on a range of projects aimed at creating life-saving and life-improving Medical Devices.
We are specifically looking for candidates with experience in Medical Devices, preferably in the areas of product design and product development. However, individuals from the life sciences sector with experience working under strict regulations will also be considered.
The ideal candidate would have a few years of industry experience and might be seeking their second role to advance their career. While a relevant degree in Mechanical Engineering or a related field is preferred, it is not essential if you have substantial experience as a Mechanical Design Engineer in the Medical Devices sector.
In return for your contributions, you will receive a competitive salary, regular salary reviews, bonuses, a pension plan, life assurance, and other outstanding benefits typically associated with larger organizations.
This is a fantastic opportunity to join a growing company that places a strong emphasis on staff development and career advancement. Due to the anticipated high level of interest, we encourage interested candidates to apply promptly to avoid missing out.
For further information, please feel free to contact Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will reach out to you.
Newton Colmore Consulting specializes in recruiting within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Senior Structural EngineerWest London (Hybrid) £50,000 - £60,000Data Centres | Major Contractor RelationshipsWould you like to work on some of the most technically demanding data centre projects currently being delivered across Europe? A growing structural and civil engineering consultancy is seeking a Senior Structural Engineer to join its team in West London. The business has established a strong reputation for delivering complex structural solutions and works closely with developers, architects and construction professionals on technically challenging projects. The successful Senior Structural Engineer will play a key role in the delivery of major data centre developments, supporting multidisciplinary teams through all stages of design and construction. Based in West London, you'll work closely with clients and contractors, providing technical expertise across a growing portfolio of data centre and mission critical projects. With the data centre sector continuing to expand rapidly, this is an excellent opportunity for a Senior Structural Engineer looking to work on large scale developments whilst remaining heavily involved in technical delivery. We Are Looking For A Senior Structural Engineer Who:Is Chartered with the IStructE or ICE;Has extensive experience delivering complex building structures projects;Has experience working directly with contractors, architects and developers;Can lead project teams whilst remaining technically hands-on;Has strong structural design experience across steel and concrete structures;Is confident undertaking calculations, technical reviews and project checks;Has excellent communication and client-facing skills;Has an interest in data centres, mission critical projects or large commercial developments;Is keen to work within a growing team in West London.As The Successful Senior Structural Engineer, You Will:Lead the structural delivery of major data centre and commercial projects;Work closely with architects, contractors and clients throughout project delivery;Undertake detailed structural calculations, design reviews and technical checks;Support projects from concept design through to construction;Coordinate with multidisciplinary engineering teams;Mentor and develop junior engineers;Build strong client relationships to encourage repeat business;Contribute to the continued growth of the structures team.Package£50,000 - £60,000Hybrid workingWest london office locationPrivate healthcarePension schemeProfessional memberships paidCPD To apply for this Senior Structural Engineer position, please apply today, or get in touch with the Structural Engineering team at Energi People to discuss this West London opportunity further.About Energi People Having spent 20 years earning trust across MEP building services, structural and mission-critical engineering with the very best construction engineering firms in the UK, UAE, USA and beyond, we know the disciplines, the best employers, and crucially, the roles that aren’t advertised. Find out more at https://energipeople.com/....Read more...
Structural Engineer Oxford (Hybrid) £35,000 - £50,000 Building Structures | Defence Projects | New Build & RefurbishmentWould joining a collaborative consultancy with a strong focus on professional development, mentoring and career progression help accelerate your career? Do you want to deliver high quality building structures projects whilst working within a supportive team that genuinely values flexibility and work life balance? A growing multidisciplinary consultancy is seeking a Structural Engineer to join its expanding team in Oxford. The successful Structural Engineer will work on a varied portfolio of building structures projects, contributing to the design and delivery of schemes across multiple sectors from concept through to completion. Working closely with senior engineers and multidisciplinary colleagues in Oxford, this opportunity will suit a Structural Engineer who enjoys technical delivery, client interaction and developing innovative structural solutions. With exposure to both new build and refurbishment building structures projects, you'll have the opportunity to broaden your experience whilst progressing towards Chartership. Due to the nature of several building structures projects, candidates will need to hold UK SC Clearance or be eligible to obtain clearance. We Are Looking For A Structural Engineer Who:Holds a Bachelor’s or Master’s degree in Civil or Structural Engineering;Is working towards Chartership with the IStructE or ICE;Has experience delivering new build and refurbishment projects;Has designed structures in steel, concrete, timber and masonry;Possesses a strong understanding of UK design standards and regulations;Is familiar with BIM processes and Revit;Can produce structural calculations, technical reports and design sketches;Has excellent written and verbal communication skills;Is keen to develop their career within the Oxford office.As The Successful Structural Engineer, You Will:Design practical and cost effective structural solutions for a variety of projects;Deliver coordinated designs alongside architects and multidisciplinary teams;Undertake structural surveys and prepare technical reports;Produce calculations and technical information for building structures projects;Support project delivery from concept design through to construction;Contribute to bid submissions and fee proposals;Develop and maintain strong client relationships;Work closely with colleagues in Oxford to deliver high quality engineering solutions;Help ensure projects are delivered safely, sustainably and efficiently.Package£40,000 - £55,000Hybrid and flexible working arrangements25 days annual leave plus bank holidaysAdditional leave for long serviceChristmas shutdownCompany pension schemeHealth cash planPrivate health and wellbeing supportProfessional memberships fundedStructured mentoring and in-house coachingCycle to work schemeDeath in service benefitVolunteering leaveTeam building and social eventsEarly finish incentivesClear progression towards Chartership and senior positionsTo apply for this Structural Engineer position, please apply today, or get in touch with the Structural Engineering team at Energi People to discuss this Oxford building structures opportunity further.About Energi People Having spent 20 years earning trust across MEP building services, structural and mission-critical engineering with the very best construction engineering firms in the UK, UAE, USA and beyond, we know the disciplines, the best employers, and crucially, the roles that aren’t advertised. Find out more at https://energipeople.com/....Read more...
Structural Engineer / Temporary Works Designer
North West London
Immediate Start
c£300 per day
A major engineering and construction firm is looking to hire a Structural Engineer with Temporary Works Design experience for a long-term contract assignment.
The successful candidate will have between 3 to 6 years engineering design experience and will need to have a solid grasp Temporary Works Design.
Our client is well known in the market and is looking to make this new appointment due to a significant increase in new workload with a healthy forward order book.
Immediate start for the right individual.
Our client has excellent transport links.
On offer is up to £300 p/d, depending on experience.
For more information on the role please contact Nick Rothery at Energi People.
About Energi People
Having spent 20 years earning trust across MEP building services, structural and mission-critical engineering with the very best construction engineering firms in the UK, UAE, USA and beyond, we know the disciplines, the best employers, and crucially, the roles that arent advertised. Find out more at https://energipeople.com/....Read more...
Electronics Engineer Consultant – Security Clearance – Cambridge
A new design consultancy, based in Cambridge, are currently looking for a Electronics Engineer Consultant to add to the team of experienced experts, specifically with a focus on security cleared projects.
Although this is a new design consultancy, they have the backing of larger companies meaning you still have the job security of working for a large company. You will also have benefits including pension, share purchase schemes, healthcare, life assurance and other excellent benefits not normally available to smaller organisations.
We are looking for an Electronics Engineer who has ideally worked on MOD, Security Clearance or other sensitive technologies. Due to the nature of consultancy services, your electronics experience could be across a number of fields such as RF Engineering, Microwave Electronics, Analogue Electronics, Sensors Technologies, PCB Electronics or other complex electronics design.
It will also be ideal if you have specific Firmware, Embedded or other software experience.
Due to the nature of work, you must already hold or be able to obtain security clearance.
Apart from the benefits, you will be rewarded with an excellent salary, career opportunities and a continued skills training to keep you at the forefront of technologies.
This is a rare opportunity to be involved with a design consultancy at the ground level, meaning future career development will be more likely than with other consultancies or companies. Due to this, I’m expecting a lot of interest in this role. If you are interested in the role, apply now or risk missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Scientific recruitment specialists Newton Colmore Consulting, on +44 121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications. Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors.
....Read more...
A Technical Sales Engineer is sought to join an innovative electronics manufacturing team in Hemel Hempstead, Hertfordshire, contributing to the growth of PCBA and full-turnkey electronic manufacturing services (EMS).
The Technical Sales Engineer, Hemel Hempstead, Hertfordshire, will be responsible for developing new business opportunities, building customer relationships and providing technical guidance throughout the sales process.
Responsibilities include:
Identify and secure new business opportunities with OEMs and electronics design houses requiring PCBA and EMS services
Consult with customer engineering teams to understand project requirements, schematics, BOMs and Gerber files
Deliver technical presentations showcasing SMT, THT, selective and robotic soldering, and automated optical inspection capabilities
Carry out Design for Manufacturability (DFM) and Design for Testing (DFT) reviews alongside internal NPI engineers
Advise customers on alternative components, material cost optimisation and supply chain challenges
Prepare accurate cost estimates, RFQ responses and technical proposals, negotiating contracts and volume pricing
Act as the key technical link between customers and internal engineering, production and quality teams while supporting sales territory expansion
The Technical Sales Engineer, Hemel Hempstead, Hertfordshire, will have the following key skills:
Degree in Electronics Engineering, Electrical Engineering or equivalent relevant technical experience
Experience in technical sales, application engineering or account management within PCBA or EMS
Strong understanding of Gerber files, electronic schematics, BOMs and IPC quality standards, including IPC-A-610
Proven B2B sales success, with experience managing complex sales cycles, negotiating contracts and achieving revenue targets
Excellent technical communication and relationship-building skills, with flexibility to travel up to 20–30% of the time
APPLY NOW – Technical Sales Engineer job in Hemel Hempstead, Hertfordshire could be of interest, send your CV to adighton@redlinegroup.Com or call Adam Dighton on 01582 878821....Read more...
Powertrain Design Engineer required to join an established design and development team working on the cutting edge of high performance engine design and application maximisation for motorsport, defence, automotive or aerospace industries.
Requirements
Power train design or high performance engine development experience.
Knowledge of modern materials and manufacturing processes.
Catia 3D
Mechanical, Automotive or Motorsport Beng or Meng qualification.
Role
Design, develop and optimise engine components and powertrain in 3D CAD.
Hand calculations, software simulations and other analysis of designs.
Detailed drawings, specifications and tolerance analyses for production details.
....Read more...
Powertrain Design Engineer required to join an established design and development team working on the cutting edge of high performance engine design and application maximisation for motorsport, defence, automotive or aerospace industries.
Requirements
Power train design or high performance engine development experience.
Knowledge of modern materials and manufacturing processes.
Catia 3D
Mechanical, Automotive or Motorsport Beng or Meng qualification.
Role
Design, develop and optimise engine components and powertrain in 3D CAD.
Hand calculations, software simulations and other analysis of designs.
Detailed drawings, specifications and tolerance analyses for production details.
....Read more...
Electrical Engineer/Designer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: Zuken E3 or E-PLAN P8
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek an experienced Electrical Design Engineer or Elektroplaner with Zuken E3 or E-Plan expertise to join our team. The successful candidate will be responsible for developing schematic drawings and Bills of Materials (BOMs) for complete systems. This role's primary focus will be creating high-quality schematic drawings and BOMs with a good understanding of the Low Voltage Directive.
Requirements:
Higher Technical School Qualification or Apprenticeship in Electrical Engineering
4+ years of experience in electrical design engineering
Strong understanding of electrical design principles, including circuit analysis and design
Proficiency in Zuken E3 or E-PLAN, with expertise in creating schematic drawings and BOMs
Knowledge of the Low Voltage Directive and relevant electrical safety standards
Excellent communication and collaboration skills
Ability to work independently and as part of a team
Strong problem-solving and analytical skills
Familiarity with design automation tools and methodologies
Nice to Have:
Bachelor's or Master's degree in Electrical Engineering or a related field
Experience with PCB design and layout
Knowledge of electrical testing and validation procedures
Familiarity with industry-standard design tools and software
Certification in electrical engineering or a related field
Benefits:
Competitive salary and benefits package – Up to CHF 120k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 100 -130k + Bonus Benefits
Tech Stack: Zuken E3, E-PLAN, PCB
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/EDARG100120....Read more...
An established and highly respected manufacturing business based in Bournemouth is seeking an experienced Production Engineer to support and improve high-quality electro-mechanical production operations.
This role plays a key part in process optimisation, tooling and fixture design, continuous improvement, and production support, working closely with cross-functional teams to ensure products are manufactured efficiently, safely, and to the highest standards.
The position is ideally suited to a hands-on engineer with experience in high-mix, low-to-medium volume manufacturing environments who is passionate about precision engineering, lean manufacturing, and continuous improvement.
Key Responsibilities for the Production Engineer based in Bournemouth
Develop and maintain detailed production documentation including work instructions, process flows, PFMEAs, machine setup sheets, and TPM schedules
Design and implement jigs, fixtures, and tooling using SolidWorks to improve efficiency, repeatability, and ergonomics
Optimise production line layouts using AutoCAD to enhance workflow, reduce waste, and maximise space utilisation
Lead continuous improvement initiatives using Lean Manufacturing, Six Sigma, and 6S methodologies
Provide hands-on technical support to production teams, troubleshooting process and equipment issues to minimise downtime
Train and support production trainers to ensure consistent quality, safety, and operational standards
Conduct process audits and line assessments to ensure compliance with internal procedures and external regulations
Collaborate with engineering, quality, and operations teams to improve product quality, manufacturability, and cost-effectiveness
Design and develop test equipment and validation procedures to ensure products meet performance specifications
Lead process standardisation and automation projects to improve throughput and reduce variability
Evaluate and implement new manufacturing technologies to maintain competitive advantage
Monitor production capacity, identify bottlenecks, and implement solutions to optimise resource utilisation
Carry out cost estimation and time studies, ensuring ERP routings reflect actual production performance
Lead capital equipment selection, justification, ROI analysis, procurement, and implementation
Promote a safe working environment and ensure full compliance with health, safety, environmental, and quality standards
Essential Skills & Experience for the Production Engineer based in Bournemouth
Proven experience as a Manufacturing, Production, or Mechanical Engineer
Background in a high-mix, low-to-medium volume manufacturing environment
HND or equivalent in Mechanical, Industrial, or Production Engineering
Strong knowledge of Lean Manufacturing, Six Sigma, and continuous improvement techniques
Proficient in 3D CAD software, particularly SolidWorks, for tooling and fixture design
Experience using ERP/MRP systems (such as Priority) for BOMs, routings, and work order planning
Strong change management skills, including implementing Engineering Change Requests (ECRs)
Excellent problem-solving and analytical skills
Strong communication skills with the ability to present technical information clearly
Proficient in Microsoft Office
If you are keen or would like to find out more information about this Production Engineer opportunity based in Bournemouth please send over an updated cv to nking@redlinegroup.Com or call 01582 878839.....Read more...
My client a well-established independent building services consultancy has an immediate requirement for an experienced senior level electrical design engineer to join them on a permanent basis.
They are looking for an ambitious engineer who can help the practice develop and grow so there would be a lot of client liaison and business development involved.
You know how to prepare conceptual schemes and develop these into detailed design packages.
Communication is key and you will be responsible for establishing / maintaining relationships with architects, contractors and clients to encourage repeat business. You will also carry out feasibility studies, condition surveys and site inspections.
You would Implement and manage QA systems and procedures on all projects and ensure all design respond to CDM regulations.
To be considered you should have at least 5-10 years' building services consultancy experience in the design of electrical services.
You should have a solid design/calculation background and be CAD literate with knowledge of Amtech/Dialux or Relux.
You should have excellent communications skills and be fully computer literate.
The projects are varied and they get involved in a mixture of high-end projects, including commercial, retail, leisure, educational and mixed-use projects. Previous experience in these fields would be an advantage
About Energi People
Having spent 20 years earning trust across MEP building services, structural and mission-critical engineering with the very best construction engineering firms in the UK, UAE, USA and beyond, we know the disciplines, the best employers, and crucially, the roles that arent advertised. Find out more at https://energipeople.com/....Read more...
The Test Engineer will join a Systems Engineering team critical in space thruster engine development. You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components. This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop. Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc. Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integrat....Read more...
Graduate Structural Engineer London£28,000 - £35,000 + BenefitsBuilding Structures | Multi Award Winning Structural SpecialistWould you like to work on architecturally ambitious projects where structural engineering is a key part of the design process?Are you looking to join a consultancy that values creativity, collaboration and technical excellence in equal measure?Does the opportunity to work closely with leading architects and designers on unique building structures appeal to you?A well established structural engineering consultancy is seeking a Graduate Structural Engineer to join its growing team in London, with opportunities to contribute to projects in Oxford and across the UK.Known for delivering beautifully designed buildings, the practice works closely with architects and developers to create innovative structural solutions across residential, commercial, education and cultural sectors.This is an excellent opportunity for an ambitious graduate looking to develop their technical expertise while working on a diverse portfolio of design-focused projects.We Are Looking For A Graduate Structural Engineer Who:Has a minimum of 1 year of UK experience working with a proactive engineering consultancy;Holds a degree in Civil or Structural Engineering;Is passionate about building structures and creative engineering design;Has a strong academic background and understanding of structural principles;Is keen to work towards Chartership with the IStructE or ICE;Possesses excellent communication and problem solving skills;Enjoys working collaboratively with architects and design teams;Has a proactive attitude and willingness to learn complex designs;Has experience using structural analysis software - TEKLA, ETABS and SAP2000;Has the right to work in the UK.As The Successful Graduate Structural Engineer, You Will:Assist in the design and analysis of a wide range of building structures and sculptures;Support the delivery of projects from concept through to construction;Work closely with senior engineers, architects and project teams;Produce structural calculations, reports and technical drawings;Gain exposure to steel, concrete, timber and masonry design;Attend site visits and project meetings;Develop your technical and professional skills through structured mentoring and training;Work towards professional chartership with ongoing support.Package£28,000 - £35,000,37.5 hours per week,22 days annual leave plus bank holidays;4% pension match;CPD - mentoring program for chartership development;Private healthcare.To apply for this role, please apply today or get in touch with the Structural Engineering team at Energi People.About Energi People Having spent 20 years earning trust across MEP building services, structural and mission-critical engineering with the very best construction engineering firms in the UK, UAE, USA and beyond, we know the disciplines, the best employers, and crucially, the roles that aren’t advertised. Find out more at https://energipeople.com/....Read more...
An exciting opportunity has arisen for an Electronics Test Development Engineer based in Fareham to join this global leader in advanced gas sensors supporting a wide range of industries.
Due to continued growth our client is looking for an experienced Electronic Test Development Engineer to join its multi disciplined engineering team and play a key role in the design, development, support and continuous improvement of electronic systems used within advanced gas sensor manufacturing and automated test environments.
Reporting to the Engineering Manager, you will support the development, commissioning, maintenance and improvement of electronic hardware used in Automated Test Equipment, automation projects and manufacturing systems. You will work closely with R&D, Production, Quality, suppliers and customers to deliver robust engineering solutions that support both operational performance and product innovation.
Key skills & experience required for Electronic Test Development Engineer:
Experienced Electronics Engineer, with sufficient knowledge of mixed signal test & repair
Ability to design PCB / test boards independently
Electronics fault finding and repair on test equipment
Knowledge of LabVIEW / NI would be an advantage
Qualified in HNC/HND or equivalent in a related discipline
British citizen / passport holder applicants ONLY. The role is required to be onsite 5 days a week. Monday to Thursday, 8:30am to 5:00pm, and Friday, 9:00am to 3:00pm.
If you are an experienced Electronics Test Development Engineer who enjoys solving technical challenges, improving manufacturing capability and contributing to innovative sensor technology, this is a fantastic opportunity to join a growing business with global backing and ambitious plans for the future.....Read more...
Are you an Senior Embedded Software Engineer – C/C++ looking to work for a company that makes products that save lives. If so, then this is the job for you! My client’s office is based in Rochester, Kent, commutable from Gravesend, Dartford, Bexleyheath, Sittingbourne, Maidstone, Ashford, and Sevenoaks and offers flexible/hybrid working.
In this job you will design and develop application software and embedded firmware in C and C++ for future products and assist with the support and enhancement of my clients existing product portfolio.
In this Senior Embedded Software Engineer – C/C++ job based in Rochester, Kent you will be responsible for:
- Design and develop embedded software using Embedded C
- Work with FreeRTOS to develop real-time, low-level firmware
- Interface directly with hardware, sensors, and microcontroller peripherals
- Contribute to system integration, debugging, and testing
- Collaborate with cross-functional engineering teams to deliver high-quality products
To apply for this Senior Embedded Software Engineer – C/C++ job based in Rochester, Kent you must have a combination of the following skills:
- Proven experience as an Senior Embedded Software Engineer
- Strong hands-on experience with Embedded C and FreeRTOS
- Solid understanding of microcontroller-based systems and real-time constraints
- Familiarity with low-level hardware interaction and debugging tools
- Experience in a safety-critical or regulated environment is a plus-
If you are interested in this Senior Embedded Software Engineer – C/C++ job based in Rochester, Kent please call Ricky Wilcocks on 01582 878810 or 07931788834 or email RWilcocks@redlinegroup.Com to apply or discuss alternative jobs.....Read more...
Senior Mechanical Design Engineer required to join a high performance whole car design team.
Requirements
Commercial experience in a competitive, automotive engineering focused environment
Vehicle mechanism design of suspension, brakes, steering and chassis experience.
CAD skills ideally with CATIA V5.
Degree in Mechanical, Automotive, or Motorsport Engineering.
Role
Produce 3D models and detailed drawings for components, assemblies and chassis systems.
Hand calculations, analysis and CAE.
Materials, structures and manufacturing processes direction.....Read more...
Senior Mechanical Design Engineer required to join a high performance whole car design team.
Requirements
Commercial experience in a competitive, automotive engineering focused environment
Vehicle mechanism design of suspension, brakes, steering and chassis experience.
CAD skills ideally with CATIA V5.
Degree in Mechanical, Automotive, or Motorsport Engineering.
Role
Produce 3D models and detailed drawings for components, assemblies and chassis systems.
Hand calculations, analysis and CAE.
Materials, structures and manufacturing processes direction.....Read more...
IT Network Engineer – Medical Technology (Tech for Good) – Vienna / Hybrid
(Tech stack: Network Engineer, Network Design, Network Architecture, IT Infrastructure, VLANs, Firewalls, Routing, Windows, LDAP, SSO, System Integration, Technical Standards, Framework Creation, Configuration Management, AV Systems, Network Engineer)
Are you an experienced Network Engineer who enjoys doing more than simply keeping infrastructure running? This is an opportunity to take genuine ownership of network design, architecture and technical standards, while helping create scalable frameworks that can be implemented consistently across complex international projects.
Our client is an innovative technology organisation developing sophisticated audiovisual systems, software and high-end hardware used by medical professionals and emergency services to train for critical situations. Their solutions are deployed across universities, hospitals and medical training environments, where reliable and well-designed IT infrastructure is fundamental to the success of each project.
You will be involved from the early stages of projects, taking responsibility for IT planning, network architecture and system design, defining infrastructure requirements, network integrations, hardware setups and configuration baselines. You will work closely with Sales, Project Management, Engineering, Staging and Support, acting as the key technical link between internal teams and customer IT departments.
A major focus of the position will be designing networks and creating and implementing reusable technical frameworks. You will define, document and maintain network requirements, system standards and integration guidelines, while building scalable, repeatable approaches that can be applied across multiple projects. The goal is to reduce unnecessary customisation and establish consistent technical foundations that support long-term scalability.
The ideal candidate will bring strong experience across network design, IT infrastructure and system integration, with solid knowledge of VLANs, firewalls, routing and Windows environments. Experience creating and implementing technical frameworks, standards or architecture guidelines is a must-have, alongside the ability to translate complex technical requirements into practical solutions. LDAP, SSO and AV/network integration experience will be advantageous.
Location: Vienna, Austria / Hybrid Working Salary: €50,000 – 80,000 Languages: Fluent English; German advantageous
Applicants must be based in Austria and have the right to work in Austria, even though hybrid working is available.
To apply for this position please send your CV to Kaan Gajjar at Noir.
NOIRAUSTRIANTECHREC
NOIRAUSTRIAREC
NOIREUROPEREC
....Read more...
Excellent opportunity for a Senior FPGA Engineer – Compute Architecture & Hardware Acceleration to join an innovative technology business on a hybrid basis, with time spent at their Oxford site, helping develop next-generation probabilistic computing platforms and advanced hardware acceleration solutions. This role will require expertise in FPGA design, algorithm implementation, and high-speed digital systems development.
Key responsibilities for the Senior FPGA Engineer – Compute Architecture & Hardware Acceleration role (hybrid and Oxford based):
Translate complex probabilistic algorithms from Python, C++, MATLAB and pseudocode into highly pipelined, resource-efficient FPGA RTL designs
Design and implement custom digital logic in VHDL from scratch where vendor IP is unsuitable, introduces latency or creates bottlenecks
Architect and integrate high-speed data acquisition pipelines utilising ultra-fast ADCs, PCIe, high-speed Ethernet and transceiver technologies
Work closely with hardware engineers, software developers, researchers and ASIC architects to define system architecture and technical solutions
Develop robust verification environments, perform hardware bring-up activities and optimise timing, power and resource utilisation across multiple clock domains
Key skills required for the Senior FPGA Engineer – Compute Architecture & Hardware Acceleration role:
Degree in Electrical Engineering, Computer Engineering or a related discipline
Demonstrable experience of FPGA digital design experience developing complex, high-speed digital systems
Strong HDL expertise with a proven ability to develop custom RTL from scratch
Experience with FPGA SoC platforms, including practical knowledge of processor-side development and PS/PL architectures such as Zynq
Proven ability to translate mathematical or algorithmic models into hardware accelerators using fixed-point arithmetic and bit-accurate modelling techniques
Strong understanding of timing closure, clock domain crossing (CDC) and advanced digital design principles
Experience with Xilinx Vivado, Vitis and TCL scripting toolchains
Familiarity with hardware debugging tools including oscilloscopes, logic analysers, JTAG debuggers and signal generators
This is an opportunity to work at the forefront of probabilistic computing, helping define the hardware architecture for a revolutionary computing platform while collaborating with leading experts and researchers in the field.
APPLY NOW! To apply for the Senior FPGA Engineer – Compute Architecture & Hardware Acceleration role (hybrid and Oxford based), please send your CV to mbelmar@redlinegroup.Com, or for more information contact Mike Belmar on 01582 878807.....Read more...
Electronics Design Engineer – Medical Devices FPGA – Cambridge
An exciting and growing Medical Devices organization based in Cambridge is currently seeking an experienced Electronics Design Engineer to work on the development of life-saving and life-improving Medical Devices.
With a primary focus on FPGA design, you will collaborate with other electronics engineers, mechanical engineers, software engineers, physicists, and scientists in the development of these Medical Devices.
In addition to FPGA Design, you will also engage in hands-on prototype development, using soldering to construct the electronics you have designed.
You will be working with highly complex technologies, ensuring that your work remains challenging every day.
Ideally, you would have prior experience in electronics design for Medical Devices. However, we are open to candidates from other highly regulated sectors, as long as your expertise lies in FPGA electronics design.
It is expected that you hold a degree in electronics engineering. Nevertheless, if you have transitioned into an Electronics Design Engineering role through an alternative path, we would still like to hear from you, as industry experience holds significant importance.
Your dedication will be rewarded with an excellent starting salary, opportunities for career development, job security, bonuses, a pension plan, life assurance, and other outstanding benefits.
Given the anticipated high level of interest in this role, if you are seeking a new opportunity, we recommend submitting your application promptly to avoid missing out.
For more information, please do not hesitate to contact Andrew Welsh, Director of Medical Devices Recruitment, and Scientific Recruitment Specialist at Newton Colmore, at +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will get in touch with you.
Newton Colmore Consulting is a specialized recruitment company operating within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Capacitor Design EngineerLocation: Norwich, Norfolk, with commuting to the factory in Great Yarmouth as required.Salary: Dependent on experienceHours: 37.5 per weekAPI Capacitors are the UK leading designer and manufacturer of high-quality capacitors for power electronic applications. Our extensive range of products provide capacitors for the traction, aviation, marine and industrial drive markets. We have customer base which includes major European and north American blue-chip companies. Our USP is the provision of custom innovative design and manufacture to order packages to suit any customer requirements. API Capacitors have supplied units for CERN on the large hadron collider, capacitors for the royal navies propulsion system and units for F1 for Mercedes HPC. API Capacitors is part of the API Holdings groups including our sister companies PPI Engineering (motor/generator design and manufacture), API Engineering (supplier of steel mill and mining equipment) and API-Stone (supplier of bespoke stonework cladding for buildings). The business is continuously investing in product improvement and manufacturing capability and has ISO9001 and cyber essentials plus accreditation.The business is investing in product improvement and manufacturing capability. There is a requirement for an electrical design engineer with experience in the design and modelling of components and manufacturing processes.Job Role
Tender design technical proposal using the in-house developed capacitor design software.Undertake R&D project testing and produce final reports.Liaise with the Drawings Office for any drawing requirements.Production of product documentation packs for manufacturing.Documentation control and management.Liaise with Quality Control, Production Supervisor, and Drawings Office to optimise design and processes for manufacture to reduce costs and manufacturing time, without compromising the quality of the final product.Design software review and improvements
The successful candidate should fulfil the following requirements:
Degree in Electrical Engineering or an equivalent subjectStrong Maths and Physics knowledgeKnowledge of power electronics, particularly passive componentsPreferably a minimum of 2 years of industry experience in a manufacturing environmentFluent technical English - written and spokenFull UK/EU driving licence and passport.Right to work in the UK.
What we offer:
Training as requiredIntegration in a highly skilled technical teamCompetitive salary24 days holiday + bank holidaysCompany phone, laptop etcCareer progressionCycle to work schemeGym membership
Interested in this Capacitor Design Engineer role? Please apply with your updated Cv. INDHS Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.....Read more...
Capacitor Design EngineerLocation: Norwich, Norfolk, with commuting to the factory in Great Yarmouth as required.Salary: Dependent on experienceHours: 37.5 per weekAPI Capacitors are the UK leading designer and manufacturer of high-quality capacitors for power electronic applications. Our extensive range of products provide capacitors for the traction, aviation, marine and industrial drive markets. We have customer base which includes major European and north American blue-chip companies. Our USP is the provision of custom innovative design and manufacture to order packages to suit any customer requirements. API Capacitors have supplied units for CERN on the large hadron collider, capacitors for the royal navies propulsion system and units for F1 for Mercedes HPC. API Capacitors is part of the API Holdings groups including our sister companies PPI Engineering (motor/generator design and manufacture), API Engineering (supplier of steel mill and mining equipment) and API-Stone (supplier of bespoke stonework cladding for buildings). The business is continuously investing in product improvement and manufacturing capability and has ISO9001 and cyber essentials plus accreditation.The business is investing in product improvement and manufacturing capability. There is a requirement for an electrical design engineer with experience in the design and modelling of components and manufacturing processes.Job Role
Tender design technical proposal using the in-house developed capacitor design software.Undertake R&D project testing and produce final reports.Liaise with the Drawings Office for any drawing requirements.Production of product documentation packs for manufacturing.Documentation control and management.Liaise with Quality Control, Production Supervisor, and Drawings Office to optimise design and processes for manufacture to reduce costs and manufacturing time, without compromising the quality of the final product.Design software review and improvements
The successful candidate should fulfil the following requirements:
Degree in Electrical Engineering or an equivalent subjectStrong Maths and Physics knowledgeKnowledge of power electronics, particularly passive componentsPreferably a minimum of 2 years of industry experience in a manufacturing environmentFluent technical English - written and spokenFull UK/EU driving licence and passport.Right to work in the UK.
What we offer:
Training as requiredIntegration in a highly skilled technical teamCompetitive salary24 days holiday + bank holidaysCompany phone, laptop etcCareer progressionCycle to work schemeGym membership
Interested in this Capacitor Design Engineer role? Please apply with your updated Cv. INDHS Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.....Read more...
With a workforce of over 500 employees across four state-of-the-art facilities in Europe and North America, this dynamic engineering group delivers comprehensive, end-to-end solutions—from concept design and manufacturing to installation, commissioning, and aftercare.Serving a diverse client base across sectors such as Online Retail & Distribution, FMCG, Life Sciences, and Automotive, this company is renowned for its technical expertise and customer-centric approach. Following a series of strategic developments, the organisation is now entering a significant phase of accelerated growth and seeking an experience Controls Engineer to bolster the growth.This employer is based in WAKEFIELD, under 10 minutes from the M1 motorway, meaning the successful Controls Engineer will easily be able to commute from surrounding towns & cities including Leeds, Dewsbury, Pontefract, Castleford, Huddersfield, Barnsley, Sheffield and Halifax.Key responsibilities of the Controls Engineer will include:
Design, develop, and deliver PLC, HMI, and SCADA control system solutions aligned to defined project outcomes
Produce and maintain technical documentation including functional design specifications, system architectures, and wiring diagrams
Take ownership of end-to-end project deliverables, from development through to testing, commissioning, and handover
Collaborate with internal teams, suppliers, and stakeholders to ensure successful delivery of agreed milestones
Conduct system testing, including FAT and SAT, ensuring compliance with industry standards and safety requirements
Diagnose and resolve technical issues across control systems, software, and communications during delivery phases
Provide structured training and documentation to support system handover, with support services defined separately from core delivery
For the Controls Engineer opportunity, we are keen to receive CV’s from candidates who possess:
Proven experience in PLC programming across platforms such as Allen Bradley, Siemens, Beckhoff, and Schneider, including advanced motion control applications
Strong background in HMI and SCADA development using tools such as FactoryTalk Optix and Siemens HMI Unified
Practical experience integrating and supporting industrial robotic systems (e.g. ABB, Fanuc, Staubli) within automated environments
Hands-on knowledge of machine vision systems, including implementation and troubleshooting using Cognex and Keyence technologies
Solid understanding of industrial communication networks and machinery safety systems, including risk assessment, design, and compliance with relevant standards
Salary & Benefits:
Up to £60,000.00 per annum
Holiday Allowance: 25 Days + bank holidays
Pension Scheme: Up to 10% (5% matched contribution)
Company Life Assurance (x2 Annual Salary) and Private Health Plan
37.5 Hours per week
Annual bonus
To apply for the Controls Engineer position, please click “Apply Now” and attach a copy of your updated CV. Alternatively, please contact Alex Feather at E3 Recruitment for more information....Read more...
