A long-established and well-respected RICS registered practice specialising in Planning and Design, located in a rural location, is seeking an Architectural Technologist / CAD Technician / Surveying Technician to join their expanding team.With a growing and diverse client portfolio, this opportunity has arisen for a technically strong individual to support the preparation of Building Regulations and technical drawing packages across a range of projects. The firm works extensively on residential and listed / historic buildings, alongside some commercial projects.You will be joining a small, well-established and vertically integrated team that works collaboratively to deliver the best outcomes for clients. The practice has a strong track record in planning and design and is known for its professional and supportive working environment.The role will primarily involve the preparation of Building Regulation and technical drawing packages for projects the firm has achieved or is seeking planning permission for. The practice uses Caddie CAD software and has a long-standing relationship with the software provider for support and training. Full training will be provided, so prior experience with this specific software is helpful but not essential.Projects may include:
Repair, conversion, extension and alteration of listed and historic buildingsNew build, extensions and alterations to residential propertiesWorks to a range of other building types, including commercial buildings
You will be required to demonstrate excellent technical design skills and a good working knowledge of Building Regulations and compliance to ensure designs meet relevant standards. You will advise on construction materials, sustainability and building performance, working closely with colleagues and liaising confidently with clients and other professionals. A good knowledge of materials and construction techniques is essential.Due to the rural office location, own transport is essential.Working hours: 9:00am - 5:00pm Salary: £30,000 - £35,000 (dependent on experience)What they offer:
Supportive, collaborative working environmentFull training on CAD software and internal processesOpportunity to work on a varied and interesting project portfolio, including listed and historic buildingsStable, long-established practice with an expanding client baseFree on-site parking
Key Responsibilities:
Preparation of Building Regulation and technical drawing packagesProducing detailed construction drawings and technical informationSupporting planning and design projects from approval through to deliveryAdvising on compliance with Building Regulations and technical standardsLiaising with clients, consultants and contractorsAssisting with technical problem-solving and design developmentContributing to high-quality project outcomes within a collaborative team
Requirements:
Qualified to AssocRICS or CIAT (or similar level of qualification)Proven experience as an Architectural Technologist, CAD Technician or Surveying TechnicianStrong technical drawing and detailing skillsGood knowledge of Building Regulations and construction standardsUnderstanding of materials, sustainability and construction methodsConfident communicator with clients and project teamsPositive, flexible, "can do" attitude and willingness to learnAbility to work collaboratively within a small teamOwn car essential due to rural office location
What happens next?To find out more and apply, please click the apply button. An agent from Hiring People will contact you directly, initially by email - so please keep an eye on your junk folder.....Read more...
Railway Engineering design role
CAD – 3D modelling
CAD - Technical drawing
Digital – Automation, programming
Office-based role using computers for design work, calculations, planning and presenting
Opportunities to visit site, be involved in design reviews etc.
Working alongside an experienced Technician
Potential progression to L6 Apprenticeship
Training Outcome:Our apprentices are employed on a permanent basis, so you'll continue to progress with Arup once you've completed your course. Employer Description:Arup is a global firm of designers, planners, engineers, consultants and technical experts. We use our skills to make a positive difference in the world. This is a brilliant opportunity to build a creative career designing and delivering exciting work in infrastructure, building design and specialist technical services.Working Hours :Shift to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working....Read more...
This role is within a civil engineering consultancy. The successful Civil Engineering Technician Apprentice will be working on a wide variety of residential and commercial projects. The position is office-based, and you will be responsible for assisting in the production of highways, drainage designs, transport assessments, and flood risk assessments. You will be responsible for preparing designs using computer-aided drafting CAD and other software.Training:On-the-job training will be provided in the use of CAD and other software used in the production of drawings, etc. There will also be external training, which will include a day release to college to gain an ONC in civil engineering.Training Outcome:The successful candidate has the potential to develop into an engineering role responsible for running projects and organising teams of technicians preparing drawings and reports etc for the project.Employer Description:The company is transport planning and civil engineering consultancy, the company works mainly in the public sector and prepares Transport Assessments and Flood Risk Assessments for new residential and commercial developments. It also provides highway design and drainage designs for developments across the country.Working Hours :Mon-Fri.Skills: IT skills,Initiative,Communication skills,Attention to detail....Read more...
An excellent opportunity has arisen for a Senior Architectural Technician to join a well-established architectural practice delivering high-quality projects across the retail, residential, and office sectors.
The practice is recognised for its practical design solutions, technical capability, and long-standing client relationships.
In this role, you will take a leading position in the technical delivery of projects, supporting design development and coordination across multiple sectors.
A competitive salary and benefits package is on offer. Candidate at intermediate level with solid job-running experience will also be considered.
Key Responsibilities
? Lead and support technical design work across a range of projects
? Contribute to the successful delivery of projects from concept through to completion
? Coordinate with internal teams and external consultants
? Provide technical input and practical design solutions
? Support and guide team members where required
What We're Looking For
? Previous experience as a Senior Architectural Technologist, Senior Architectural Technician, Architectural Technologist, Architectural Technician, Architect, or similar role
? Around 10 years' experience within a technical role in an architectural practice
? Strong proficiency in CAD
? Revit experience is advantageous
? Strong problem-solving and analytical skills with a practical approach
? Experience supporting or working within teams of varying experience levels
This is a strong opportunity for a career-minded Senior Technician looking to take on more responsibility within a stable and established practice, with scope for continued professional development.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For mor....Read more...
Multi-disciplined engineer for production of medium to high volume complex components for (predominantly) the Aerospace industry
Set & Operate bar fed CNC Sliding Head twin spindle machine tools
Program & Set multi-sensor CNC inspection equipment
CNC program development using CAD/CAM systems
In process inspections
Offset adjustment
Tip changing
Tool setting
Machine set-up
CNC program editing for cutting and inspection equipment
Inspection equipment programming
CNC programming (basic)
CAD/CAM programming
Training:
Level 3 Machining Technician Apprenticeship Standard:
This programme is delivered via a day release delivery model which means that one day per week, your attendance is required at our Engineering campus, NG17
This attendance is required during term time only
You will work with expert assessors to develop new knowledge, skills and behaviours within the profession
You will experience a blended learning model
You will gather learning evidence, journals and off-the-job records using your e-portfolio
At the end of the planned learning period, it will be agreed that you are ready to enter 'Gateway' and for your End Point Assessment to be arranged
Training Outcome:
Potential full time employment upon completion of apprenticeship
Employer Description:Trust Precision Engineering is an AS9100 for Aerospace accredited machined parts sub contract service provider specialising exclusively in sliding head machining. The proven cost savings of 1 hit machining for both simple and complex components is fundamental to our philosophy. Trust Precision will provide the highest quality and service for your machined component requirements. With our uncompromising approach to the business you will get the quality and value you deserve.Working Hours :Monday - Friday, 08.00 - 16.00.Skills: Attention to detail,Interpersonal skills....Read more...
An excellent opportunity has arisen for a Senior Architectural Technician to join a well-established architectural practice delivering high-quality projects across the retail, residential, and office sectors.
The practice is recognised for its practical design solutions, technical capability, and long-standing client relationships.
In this role, you will take a leading position in the technical delivery of projects, supporting design development and coordination across multiple sectors.
A competitive salary and benefits package is on offer. Candidate at intermediate level with solid job-running experience will also be considered.
Key Responsibilities
* Lead and support technical design work across a range of projects
* Contribute to the successful delivery of projects from concept through to completion
* Coordinate with internal teams and external consultants
* Provide technical input and practical design solutions
* Support and guide team members where required
What We're Looking For
* Previous experience as a Senior Architectural Technologist, Senior Architectural Technician, Architectural Technologist, Architectural Technician, Architect, or similar role
* Around 10 years' experience within a technical role in an architectural practice
* Strong proficiency in CAD
* Revit experience is advantageous
* Strong problem-solving and analytical skills with a practical approach
* Experience supporting or working within teams of varying experience levels
This is a strong opportunity for a career-minded Senior Technician looking to take on more responsibility within a stable and established practice, with scope for continued professional development.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
The role includes:
Engineering design support and CAD production
Preparation of technical drawings and design deliverables
Participation in structural inspections and investigations
Extraction and collection of samples for laboratory analysis
Management and organisation of company equipment stores
You will have the opportunity to work on high profile projects like:
Forth and Tay Road Bridges
HMS Belfast
Battersea Power Station
Kew Gardens Temperate House
Numerous Highways and Infrastructure Projects
Key Responsibilities:
Engineering & Design Support
Assist engineers in preparing technical drawings using CAD software
Support the production of design packages and formal deliverables
Maintain drawing registers and document revision control
Develop understanding of structural repair and protection systems
Support preparation of sketches, mark-ups and technical documentation under supervision
Site Inspection & Investigation
Assist with inspection of civil and structural assets across the UK
Support non-destructive testing of reinforced concrete and steel structures
Extract and collect samples from structures for laboratory analysis
Maintain clear, accurate and methodical site notes
Compile photographic and technical records for reporting purposes
Work outdoors in varying weather conditions
Climb ladders and access elevated or confined areas as required
Travel frequently throughout the UK, including occasional overnight stays
Equipment & Stores Management
Organise and maintain company equipment stores
Ensure all equipment is cleaned following use
Ensure equipment is functional, safe and ready for deployment
Maintain equipment logs and inspection/calibration records where required
Manage consumables and maintain orderly storage systems
Training:Training will take place once a week will take place at City of Westminster College, Paddington Campus (25 Paddington Green, London W2 1NB).Training Outcome:Continued employment with a growing team of Engineers.
This role provides a structured pathway into Engineering Technician [EngTech] registration, with the opportunity for continued training to Engineering roles, Incorporated Engineer [IEng] or Chartership [CEng].
This role offers specialist training in Cathodic Protection to BS EN ISO 15257:2017, Level 3 with opportunity to continue training to Level 4 [Senior Cathodic Protection Engineer].Employer Description:Corrosion Engineering Solutions Ltd is a specialist UK consultancy based in Tring, Hertfordshire, providing corrosion engineering, inspection, investigation and design services to the construction and infrastructure sectors.
We are experts in the design and implementation of Cathodic Protection systems for Historic Buildings, Concrete Structures, Ports and Harbours and Buried Infrastructure.
We assess, design and deliver solutions for the protection and repair of reinforced concrete and steel structures. Our work combines technical design, structural inspection, materials science and practical site engineering. We operate nationally and work on complex infrastructure and structural assets.Working Hours :8 hours per day, between the hours of 08.00 and 18:00.Skills: IT skills,Attention to detail,Organisation skills,Team working,Initiative,Physical fitness,Willingness to learn,Eligible for BPSS screening,Experience with CAD software,Methodical approach to work....Read more...
Apprentice Work Responsibilities:
Assist in production processes: Support the manufacturing of infrared heaters using both manual and CNC machinery
Interpret engineering drawings:
Read and understand technical drawings, specifications, and CAD models to ensure accurate production
Use CAD and technical software: Produce designs, modify layouts, and support engineers in creating manufacturing solutions
Quality control and testing: Inspect components, test equipment, record results, and report any issues to ensure high standards
Support process improvement: Identify inefficiencies, suggest improvements, and assist in implementing better workflows
Technical reporting and documentation:
Write reports, maintain records, and document test results or engineering changes
Collaborate with teams: Work alongside engineers, technicians, and other departments to coordinate tasks and projects
Health, safety, and compliance: Follow all safety protocols and environmental regulations in the workplace
Learn from mentors: Receive guidance and support from experienced engineers, supervisors, and tutors throughout your apprenticeship
Training:
4-days per week on-the-job at Tansun
1-day per week off-the-job training at Sandwell College 404 High Street, West Bromwich B70 9LB
Level 3 Engineering and manufacturing support technician apprenticeship
Training Outcome:
For the right candidate to progress as a full-time employee
Employer Description:Tansun is the UK’s leading infrared heater manufacturer. With over 40 years of experience in the heating industry, our vast range of infrared heaters are manufactured to the highest quality, providing optimum heat performance all year round. Each infrared heater range is designed with unique features, specific to the heating sectors and applications they target.
Fully IP rated weatherproof heaters specially created for outdoor commercial heating, premium infrared heaters with glare reducing gold reflectors for ultra low glare heating, even portable heaters with anti-tilt safety devices for emergency mobile heating. We offer the largest range of domestic, commercial and industrial infrared heaters in the world today!Working Hours :Hours to be discussed at interview.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Main Duties:
Creating 3D models of components & assemblies using NX software
Creating 2D drawings from 3D models
Creating & issuing Drawing Office documentation such as Engineering Change Notes, New Product Issues, Concessions & Product Specification Sheets
The successful candidate will be working in a busy Drawing Office & will report to the Drawing Office Manager. The Drawing Office is a part of the Research & Development department at Celestion. Drawing office members work closely with engineers within R&D to detail designs to document them for sampling or production & to execute changes to components & products as required.Training:
The learner will be studying the Engineering Manufacturing Support Technician Level 3 Apprenticeship Standard qualification
Day release to West Suffolk College
Training Outcome:To progress in the Drawing Office to CAD Draughtsperson.Employer Description:Manufacture of transducers (speakers) from our 2,500m2 clean modern production facility based on Claydon Business Park, Great Blakenham.Working Hours :Monday-Friday (Mon – Thurs = 8:30 to 5:00) (Fri = 8:30 to 3:45).Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Initiative,Team working,Logical....Read more...
Assisting those personnel at Inspection Engineer level and above in performing NDT on a wide range of Marine and land-based assets
Corrosion mapping utilising complex ultrasonic and electromagnetic methods
Modelling of inspection data
Work as part of a project team to produce detailed, technical inspection reports
Assisting in failure investigations
Assist in equipment functionality checks & calibrations
Perform any assigned tasks with due diligence regarding Brookes Bell’s integrated quality management systems
Training:Non-destructive Technologies Technician Level 3.
The apprenticeship programme is designed to gain skills and technical expertise to become a certified NDT Technician in three NDT Methods. This includes health and safety training, 1-to-1 mentoring, seminars, practical work experience sessions, and on-the-job training.
The candidates will keep records of their learning and experience throughout the programme and create an improvement plan.
On successful completion of the apprenticeship scheme, further PCN qualifications may be gained. Training Outcome:Upon completion of the apprenticeship and satisfactory performance in the role the individual will be promoted to be an Inspection Engineer in the following January or July.
Career Progression in the years following is determined by meeting relevant targets. Promotion applications are accepted twice a year in July and January.Employer Description:Brookes Bell provides multidisciplinary technical and scientific consultancy to the maritime and energy industries.
The Lab provides services in forensic engineering analysis, investigation and testing including NDT.
The NDT department specialises in advanced electromagnetic testing and ultrasonic testing, working for clients such as the Royal Navy, MOD and a wide range of commercial entities.Working Hours :Monday to Friday, 9.00am - 5.30pm.
1-hour lunch break.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Team working,Initiative,Writing Skills,CAD & 3D modelling Software....Read more...
Produce accurate civil and structural drawings using industry-leading Computer-Aided Design (CAD), Revit, and Building Information Modelling (BIM) software
Collaborate with engineers and project managers to support design processes
Ensure all drawings meet project specifications and quality standards
Balance on-the-job training with college coursework to build a strong technical foundation
Training:
Civil Engineering Technician Level 3 Apprenticeship standard
Training will be held at Leeds College of Building
College attendance will be one day per week on a day release basis
Training Outcome:After completing a civil/structural engineering technician apprenticeship, there are several career progression opportunities depending on your interests, skills, and further education.
1. Engineering Technician (EngTech) Status:Professional Registration: Many apprenticeships are designed to meet the requirements for EngTech status with institutions like the Institution of Civil Engineers (ICE). This is a recognised professional qualification that can open doors for career advancement
2. Further Education and Qualifications:Higher National Certificate/Diploma (HNC/HND): Many apprentices pursue further qualifications, like an HNC or HND in Civil or Structural Engineering, which can deepen technical knowledge
3. Bachelor’s Degree (BEng/BSc): With the right qualifications and experience, you might progress to a degree-level apprenticeship or enroll in a part-time/full-time university course
4. Chartered Engineer (CEng) or Incorporated Engineer (IEng): With further studies and experience, you could aim for higher professional qualifications, which significantly boost career prospects and salaryEmployer Description:JPG excels in providing the highest quality civil and structural engineering consultancy services. We work for clients UK wide and internationally, covering all the major development sectors and working on projects from site acquisition and appraisal through to construction completion.
Our dedicated team of engineers and technicians are skilled in all aspects of civil and structural design, combining creativity and environmental innovation with exacting compliance to industry regulation.Working Hours :Full time position- 7.5 hours per day - 37.5 hours per week.
Monday to Friday 08:30am- 5:00pm with one hour's flexibility around start finishing times.
One hour for lunch.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Team working,Initiative,Non judgemental,Patience,Committed to learning....Read more...
You will join our Roads & Highways department.
As our new Technician Apprentice you will be part of a fast growing, dynamic team in our Southampton office. You will be part of an exciting team of experts, who respect each other and work towards a common goal. You will be provided with on-the-job training and mentoring from our team of experienced, industry-leading professionals.
Your key tasks and responsibilities will be:
Working on Small, Medium and Large projects, producing 3d models, visualisations, drawings and schedules that describe how to build our award-winning designs under the leadership of the discipline manager
You will learn to use an extensive suite of cutting-edge CAD applications and be challenged to improve the use of them
You will be working alongside the rest of the Transport team, and teams of all disciplines nationally and internationally across the Ramboll Group to deliver our projects
Promote the Ramboll brand, its core values and our strategy as The Partner for Sustainable Change
Apply and promote policies relating to health and safety, quality and the Environment
Training:Job Description:
Ramboll invite you to apply for a Technician Apprenticeship in our Transport Infrastructure team, assisting the delivery of Infrastructure design services across a wide range of projects. You will be provided full support to achieve a Level 3 qualification, typically on a day release basis, and create a solid foundation for a successful and satisfying career.
The Apprenticeship Programme Duration, Cost and Qualifications:
The duration of this apprenticeship is typically 27 months (depending on experience). The cost of the Apprenticeship is paid by Ramboll through the Apprenticeship Levy.
Qualifications to be awarded:
Level 3 Civil Engineering Technician Apprenticeship
BTEC Level 3 National Diploma in Construction and the Built Environment
Progression Opportunities:
On completion of the Apprenticeship you will have satisfied the requirements for registration as an Engineering Technician by the Institution of Civil Engineers in accordance with the requirements of the Engineering Council as the registration body. Potential onward career progression within Civil Engineering could be to continue work as a Civil Engineering Technician, study a Senior Technician Apprenticeship or complete a Degree (apprenticeship options are available) in Civil Engineering.
Apprenticeship Course Delivery:
The apprenticeship will involve working for Ramboll 4 days a week and a day release per week in person at college or remotely at South Hampshire College Group. You will be required to complete an End Point Assessment where you will need to demonstrate that during the apprenticeship you have learnt the required knowledge, skills and behaviours.Training Outcome:Progression Opportunities
On completion of the Apprenticeship you will have satisfied the requirements for registration as an Engineering Technician by the Institution of Civil Engineers in accordance with the requirements of the Engineering Council as the registration body. Potential onward career progression within Civil Engineering could be to continue work as a Civil Engineering Technician, study a Senior Technician Apprenticeship or complete a Degree (apprenticeship options are available) in Civil Engineering.Employer Description:Ramboll is ranked a Top 10 consultant in the UK and has 1,500 bright minds working across 17 offices to apply their passion to deliver innovative solutions across Buildings, Transport, Environment & Health and Energy. We love seeing our talents develop and succeed and you will have opportunities to work on challenging and inspiring projects within an environment that is friendly, open and supportive.Working Hours :4 days a week at Ramboll.
1 day remote learning or at a local college.
Shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Team working....Read more...
This isn't just a desk job; it’s a front-row seat to the processes that power nearly one million homes. You will learn to operate, monitor, and fault-find on a state-of-the-art Combined Cycle Gas Turbine (CCGT) power station, working with a highly skilled team to keep the lights on across the UK as an Operations Shift Technician Engineering Apprentice.
About the Role & Responsibilities:
Working within a twenty-strong operations team and reporting to the Operations and Maintenance Lead, you will develop the technical expertise required to manage the multi-million pound asset.
Core Responsibilities as an Operations Shift Technician Engineering Apprentice:
Ensuring the safe and efficient operation of all company assets within designated limits (including steam chemistry and emissions)
Operating the plant to meet commercial requirements using data handling software
Regularly inspecting equipment, identifying hazards, and applying plant isolations to ensure ‘Safety from the System'
Undertaking proactive maintenance and production projects to maximise plant availability
Progressing toward supervising contract staff and ensuring compliance with Marchwood’s Safe Systems of Work
Training:You will be enrolled in a Level 3 Engineering and Manufacturing Support Technician Apprenticeship. This 36-48 month program balances hands-on experience with academic learning:
Work-Based Learning: On-the-job training at Marchwood Power, supported by a dedicated company mentor
Formal Education: Weekly day-release training at PETA’s Havant site
Technical Skills: You will learn 2D/3D CAD, create operating instructions, and support quality assurance activities
Future Growth: Upon successful progress, there is the option for further education, including an HNC or higher
The successful candidate will join the team in August 2026.Training Outcome:Marchwood Power has a proven track record of nurturing talent. Upon successful completion of your apprenticeship as am Operations Shift Technician Engineering Apprentice, we aim to offer:
Full-time employment as a qualified Operations Shift Technician
Continued professional development tailored to your specific area of interest within the energy sector
Employer Description:Marchwood Power Limited owns and operates a multi-million pound natural gas-fired Combined Cycle Gas Turbine (CCGT) power station on Marchwood Industrial Park, near Southampton.
Marchwood Power Station began generating electricity in 2009. The station generates approximately 895MW of electricity for the national grid, enough to supply nearly one million homes. This is equivalent to the needs of Southampton, the New Forest and Winchester.
The facility aims for optimum energy efficiency ensuring minimised impact on the environment per MW. It is one of the most efficient power stations in the UK.
In year 4 it is anticipated that the role will change to shift work in accordance with the shift rota which is 12 hour shifts. A additional shift allowance payment would then come into effect. Note – The Operations Shift Technician role is day and night work in accordance with the shift rota.Working Hours :Monday to Friday, between core business hours of 07:00 and 17:00.Skills: Communication skills,IT skills,Problem solving skills,Team working,Analytical thinker,Passion for engineering,Takes pride in their work,Strong time management,Keen eye for detail,Ability to prioritise....Read more...
How to interpret and produce engineering drawings and CAD models using industry-standard software
How to understand materials, tolerances, manufacturing processes and how design decisions affect production
How to support the estimating and design teams with technical data, drawings, and documentation
How to work with engineering change processes, revision control and technical specifications
Quality control principles, inspection techniques and how to design for quality and manufacturability
How to communicate technical information clearly to colleagues in design, production and sales
Recognised engineering and manufacturing standards including 5S, safe working practices and continuous improvement
How to contribute to problem-solving activities and support engineering projects from concept to manufacture
Training:
Machining Technician Level 3
Training will take place at Printworks Campus, Leeds
You will be required to attend college one day per week
Training Outcome:Full-time position upon successful completion of the apprenticeship.Employer Description:Barkston is one of the UK’s premier plastic engineering companies serving OEMs in virtually every industry. We’re experts in plastic fabrication with over 55 years’ heritage in the UK and are fully committed to helping you gain a competitive advantage in your industry.
Becoming an apprentice with Barkston Plastic Engineering will allow you to build a wide range of engineering and design skills within a supportive and successful business. Our apprenticeships follow a structured programme under which you will receive close mentoringfrom experienced engineers and designers, alongside support from our apprenticeship provider both at college and in the workplace. Working Hours :8am - 4pm Monday to Thursday, 8am - 2pm Friday (one day per week at college)Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
You will learn how products are designed, manufactured, and assured to the highest standards while rotating through areas such as sheet metal fabrication, assembly, quality assurance, quality control, research and development, sales, and procurement. This is an excellent opportunity to develop a strong foundation in engineering and discover where your strengths and interests lie within a leading manufacturing environment.
The successful candidate will join the team in February/March 2026 in a pre-apprenticeship role, with the registered apprenticeship and associated training beginning in September 2026. As an Engineering & Manufacturing Technician Apprentice, you will learn to support production with new product introduction, project requirements and continuous improvement.
Reporting into the Engineering manager. You will learn a variety of working activities that will in turn support the team to ensure that our products are delivered on time to quality, environmental and cost targets.
As an Engineering & Manufacturing Technician Apprentice, you will have a wide range of responsibilities, as part of the role, some of your responsibilities will be:
Learning and understanding the manufacturing processes and capabilities
Helping to create operating instructions and procedures
Supporting quality assurance and quality control activities
Providing support to production and engineering
Actioning manufacturing deficiency reports
Creating sales general arrangement drawings
Actioning change request notes
Producing drawings, models and bills of materials to sales and customers specifications
Learning 2D and 3D CAD
Training:As an Engineering & Manufacturing Technician Apprentice, you will be studying a Level 3 Engineering and Manufacturing Support Technician Apprenticeship. Throughout your apprenticeship with Elta-UK Limited, you will be supported by your company mentor and your PETA Learning and Development Coach.
Your Level 3 programme will include a level 3 Engineering work-based qualification delivered by PETA and weekly day-release training at the Havant site, completed over 48 months.Training Outcome:Elta-UK Limited have successfully been supporting Apprentices previously and are proud to be training people on the job for the future. The career opportunities at Elta-UK Limited are varied following the completion of the apprenticeship, there may be the potential for:
Full-time employment
Further personal development within your chosen area of interest
Employer Description:Elta-UK Limited is an international leading manufacturer of ventilation and air quality solutions, We design and produce high-quality air movement products – including fans, air handling units, controls and noise-control equipment – for commercial, industrial, OEM, residential and international markets.
Part of the global Elta Group, Elta-UK Limited operates from our Fareham site in Hampshire and additional locations across the UK and Ireland. We combine engineering excellence with expert technical support to deliver reliable, innovative solutions that improve indoor environments and promote healthier, cleaner air.
Over the decades, Elta-UK Limited has continually invested in advanced manufacturing capabilities and industry-leading technology, earning a reputation for quality, performance and service. Today, our products and expertise support a wide range of sectors worldwide, reinforcing our position as a trusted name in ventilation and air quality engineering.Working Hours :Monday- Thursday, 07.45- 16.15.
Friday, 07.45 - 13.15.
Half an hour unpaid break.Skills: Communication skills,IT skills,Attention to detail,Team working,Initiative,Adaptable,Willingness to learn,Time management,Ability to prioritise....Read more...
The successful applicant will spend their days supporting and learning from technicians and engineers alike in the build and design of Chelton Products
This will involve the physical build and test of our product as well as the design processes, which will include design meetings and reviews, CAD work and remedial investigation
Training:Qualifications included:
Engineering Manufacturing Technician Apprenticeship Standard Company Training Plan & Assessment
BTEC Level 4 Higher National Certificate in Engineering (1 day per week for 2 years at college)
Level 4 Diploma in Engineering and Advanced Manufacturing (Development Competence)
Level 2 Functional Skills - maths (If required)
Level 2 Functional Skills - English (If required)
End Point Assessment at the end of the apprenticeship (Months 36 to 39)
College will be in Bicester, Oxfordshire
Training Outcome:
Upon completion of the apprenticeship by the successful applicant, there will be the opportunity to join the engineering team in one of our business units where the former apprentice can begin their progression through each engineering level
There are also opportunities to move into management roles if desired
One of our previous apprentices is now a Head of Engineering in Chelton and previous to that held one of our Business Unit Manager roles
Employer Description:At Chelton we engineer advanced, robust land-based and airborne products and solutions designed to empower critical civil and military operations in dynamic environments. Working closely with global defence agencies and aviation leaders, we've developed a broad range of solutions to meet the diverse requirements of our customers. Our technology enhances operational capabilities, enables seamless communication, protects aircraft, pilots and passengers and supports navigation worldwide.Working Hours :Monday - Friday, 9.00am - 5:00pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience,Time Management,Willingness to learn....Read more...
Person required to train on our latest CNC Milling and Turning machines to include fixed head and sliding head
All aspects of training will be given to right candidate and there is a possibility of off-site training at the manufactures training HQ
College 1 day per week in Chelmsford General duties:
Leaning all aspects of CNC Milling and turning
Setting up
Programming to include CAD CAM and operation
Machine maintenance + health and safety
Training:
Engineering Level 3 Machining Technician
Training Outcome:
Potential full-time role after apprenticeship
Employer Description:Southfields has been trading since 1979 and have over 35 years experience, our success due to trading across a diverse market, catering to an extensive range to our customer’s requirements, all of which are of the highest standard of expertise. Southfields capabilities are limitless, and quality is always at the forefront of our business strategy.
Our modern subcontract CNC turning and milling facility is situated in Essex and has been fully equipped to enable us to offer our customers the most reliable and efficient precision CNC machining service possible.
The bespoke nature of our business allows us to cater for the needs of each customer individually.
In what are often complex time critical supply chains, we understand the need to offer quick turnaround to our customers. Our lead times are flexible depending on batch size. We offer a fast track CNC turning and milling service if your requirement is urgent. We will work with you to deliver the most efficient service possible.
In addition, our engineers use their skill and experience in CNC precision engineering to advise customers on the design of their components; where opportunities exist to achieve greater cost efficiencies through design improvements, our engineers will discuss these with customers to ensure they achieve maximum efficiencies.Working Hours :Monday- Thursday, 8.00am - 4.30pm.
Friday, 8.00am - 3.00pm.Skills: Good Communicator....Read more...
Support senior engineers in the design of electrical installation systems for industrial projects
Assist in creating detailed electrical layouts using AutoCAD and other CAD software
Learn to interpret and produce electrical drawings, loop diagrams, and technical documentation
Contribute to project planning, calculations, and compliance with relevant electrical standards (e.g. BS 7671)
Help with site surveys and understanding how designs are implemented in real-world environments
Gain exposure to building services, power distribution, lighting, and cable management systems
Work collaboratively with cross-functional teams including mechanical engineers and project managers
Training:An apprenticeship allows you to earn a wage, gain valuable work experience and industry-specific competence. You will be expected to work towards the Engineering Manufacturing Technician Level 4, with support from your employer and the Chesterfield College Group.Training Outcome:Full-time position with the company with opportunities for further progression and development.Employer Description:As a well-respected Employer, we provide a range of control panel manufacturing services for a variety of industries. Customer satisfaction is our top priority, and all our employees are professional, friendly, honest, and polite. We guarantee all our work and carry out each job safely, diligently and efficiently to ensure that clients receive high quality, cost effective workmanship that fully meets their needs and expectations.
We are proud to be an equal opportunity employer and are committed to creating an inclusive environment for all employees. We welcome applications from individuals of all backgrounds, experiences, and identities. As part of our commitment to ethical recruitment practices, we ensure a fair, transparent, and respectful hiring process for every candidate.Working Hours :Monday to Friday 8.00am - 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Day to day role responsibilities include:
Working alongside our Metrology & Technical Support teams, you will assist with the creation, analysis and distribution of documentation such as inspection reports, SPC Data, SOP’s and Engineering Masters
Tasked with leading a project/team of engineers whilst also collaborating with additional departments on a given task/project
This may include aspects of R&D, understanding of commercial impact and communication/feedback to senior management or direct to customer
Continue to build up a stronger knowledge of Multi Axis machining, both Milling & Turning, Work Holding & Tooling, to enable you to assist with New Product Introduction (NPI’s) & Continuous Improvement activities - this will include the use of 3D CAD
Work alongside our team of Inspectors and Metrologists to ensure our customers only receive components which are within their specifications and uphold our quality standards
Be responsible for the quality, safety and compliance of any project/task they are leading
To carry out additional duties as requested by Mentor, Senior Setter(s) or Team Leader(s)
To undertake work-based learning assignments with support of College Assessor and Mentor
Training:
The apprentice will be working towards the Level 3 Engineering and Manufacturing Support Technician Apprenticeship Standard
Qualifications include the EAL Level 3 Diploma in Engineering and manufacturing support technologies
Training Outcome:Dalau Ltd are committed to giving opportunities to allow the next generation of Engineers to flourish. We hope that by giving our apprentices a solid foundation in the industry that they can then go on to become key members of the business, showing a fresh innovative approach to problems whilst being at the forefront of technological improvements. We are a firm believer in creating a target driven environment so that employees always know what they are working towards and what the reward is at the end of it.Employer Description:Dalau Ltd are a market leader in the manufacture of precision plastic components & fluoropolymer products, accredited to AS9100, ISO9001, IS013485, ISO14001 & IS045001. We are based in Clacton-on-Sea - manufacturing and distributing worldwide for over 60 years. Dalau Ltd are a renowned supplier of products into industries such as Medical, Aerospace, Semi-conductor & Chemical, this is down to their ethos of constantly looking at pushing the boundaries of plastic manufacturing by investing the latest technology, both in CNC machining and Metrology.Working Hours :Monday to Thursday, 06:30 - 17:00 or 16:30 - 03:00 or Monday to Thursday, 07:00 - 16:30 & Friday 07:00 - 11:00 (department & shift dependent) with a 30-minute unpaid lunch each day.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness,Methodical Method of Approach....Read more...
Produce CAD drawings in 2D and 3D, using Peps and Visi, for customers and the tooling factories. Create the CAM programs, using PEPS, for the UK factory to manufacture the tooling
Discuss customer requirements directly with them via telephone and email
Many customers will send us their part drawings to understand what they need to manufacture. Very often, we will need to call the customer to clarify issues
Evaluate solutions and costs for customer enquiries
For punch tooling, there is often more than one solution for the manufacturing of the product and also limitations as to what can be produced. Possible solutions need to be discussed with our customers, explaining the cost/benefits
Discuss tooling technicalities and solutions with the factory, understanding the manufacturing process at our factory
Uses to make the tooling – discuss manufacturing issues with the factory staff
Discuss directly with overseas factories the UK customer tooling requirements
Discuss with the French and Japanese factories any technical issues and delivery problems that might occur
Produce technical quotations for the proposed solutions for customers
Complete tooling quotations including technical specification, drawings and pricing for our demanding customers
Learn the basic programming language for the Amada Turret Punch Press
Learn how to create simple programs, using machine programming language to run the Amada Turret Punch Presses
Produce samples and complete tests for punch tooling in the Amada showroom
Using basic programming skills, test punch tools to prove the concept or to understand issues that have been experienced
Produce samples of specific tools designs for customers to appreciate and understand the concept
Training:Formal training is delivered at HWGTA, which is located in Worcester (WR4 9GN):
Years 1/2 are a combination of off-the-job training at HWGTA Training Centre, as well as training on-site with your employer. This includes 29-42 weeks within the training Centre, plus 1 day per week in a classroom setting to cover practical and theory aspects and complete the EAL Level 3 Diploma in Advanced Manufacturing Engineering - Development Knowledge
Years 3/4 based full-time in the company, developing skills in preparation for the end-point assessment to gain your Engineering and Manufacturing Support Technician Level 3 qualification
You will receive monthly visits from your assigned Learning and Development Specialist, who will set your work, monitor your development and well-being, and discuss training sessions. They will also prepare you for your End-Point Assessment
Additional training for functional skills in English and maths will be undertaken if needed
There is also a five-day teambuilding residential trip that is held in the spring of each year, offered to all apprentices on the programme
Training Outcome:
Excellent prospects and progression, including the possibilities of training and overseas travel
Employer Description:Amada Group is an international market leading manufacturer, providing a complete solution of machines, tools, software, service, parts and finance for our customers.
Amada UK, based in Kidderminster has in excess of 16 years experience of employing apprentices.Working Hours :Monday - Friday, 08:30 - 17:00 including 1 - hour unpaid lunch.Skills: Communication skills,Attention to detail,Team working,Strong work ethic,Flexible attitude,Smart and professional,Enthusiasm & Self-motivated....Read more...
Fantastic opportunity to work in an engineering company who design and manufacture ultra-high-quality brake, clutch and other automotive components to Motorsport, top OEM and Special Vehicle markets.
This is an amazing opportunity to learn to become a multi-skilled manufacturing engineer.
You will get the opportunity to work in the following departments:
Design Engineering:
You’ll get an insight into using computer software such as Solidworks 3D CAD software, to produce accurate solid models which have been requested from our customers
Our Design Engineers ensure our components are as strong, light and efficient as possible, through accurate design of parts. Design Engineers work in an office environment designing components on computer software
Research & Development:
To stand still is to go backwards, so in research and development we look into the future, developing new ideas, patenting new processes and ensuring the company is always ahead of the competition
As an R&D Technician or Engineer, you will work in the R&D lab carrying out testing of parts, as well as using a computer to record data
Planning:
You’ll see first-hand how highly organised our planning strategy is. Planning is used to manage the coordination of production workflow, and developing and reviewing production plans with other departments
The manufacturing department is led by the work-to plan that the Planning team put together
As a Planner you will be based in an office using a computer
You will need to speak to other departments to ensure that the plan will work and your customers are updated with any changes as this will effect the delivery dates of components made
Quality Engineering (Metrology)
Quality is where we check each component is visibly correct before it is then compared to a mathematically perfect specification. Any part that is found to be outside these requirements that cannot be easily corrected is simply discarded and the whole process starts again
Quality Engineers and Technicians work in a Quality Lab, where there is a mix of hands-on work such as measuring components, and computer-based work
Production Engineering:
Production Engineering is made up of a team of Production Engineers who support the machining and assembly departments
The Production Engineers will provide technical expertise, help with problems on the machines, diagnose and solve problems, ensuring that the machines that make our products are working smoothly and efficiently. We have a wide variety of CNC machines with Fanuc and Heidenhain controls which are operated by our highly skilled CNC setter operators
Production Engineers work on the shop floor and also at a desk with a computer
Training:Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with your employer and Make UK, which are fully paid for, including:
Advanced Manufacturing Engineering Practical Foundation Training – in year 1, in 6 week blocks to include 4 weeks at Make UK and 2 weeks in company
Advanced Manufacturing Engineering Workplace
Competence Training - in years 2 to 4 in company
Level 3 BTEC Diploma in Advanced Manufacturing Engineering Development Knowledge - in Years 1, 2 & 3 on block release to Make UK
In house training in line with your requirements
Further qualifications deemed necessary by your employer
On completion of your studies, you will achieve your full apprenticeship certification that will prove competence as a Level 3 Engineering and Manufacturing Support Technician
Training Outcome:
Our Alcon Apprentices, once they have completed a 4 year apprenticeship will become fully qualified Technicians or Engineers in their specialism of engineering
We look to promote from within and some of our Senior Managers today came through the Alcon Apprenticeship Programme
If the management route is not for you, then becoming an expert in your line of work is where we aim to get you
Employer Description:Alcon is a designer and manufacturer of ultra-high quality, low volume brake, clutch and other automotive components. We operate in all areas of the industry around the world. Our clients and their requirements are as wide ranging as the products we supply. From tiny brake-by-wire controllers for Formula E racing cars to calipers required to stop 35 tonnes of armoured vehicle, the only factor common to everything we do is our no-compromise approach to engineering excellence.Working Hours :Monday - Friday, 08:00 - 17:00Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
During your apprenticeship, you will receive training in a wide range of core engineering practices, including:
Advanced Machining and CAD/CAM
Additive Manufacturing and 3D Printing Technologies
Automation Systems and Robotics
Battery Materials and Cell Manufacturing
Energy Applications
Engineering Materials
Intelligent and Autonomous Vehicles
Laser Beam Welding and Advanced Joining Techniques
Metrology and 3D Imaging
Mechanical Testing
Nanocomposite Materials
Polymers and Composites
Hot Works and Steel Processing
Electron Microscopy
Materials Characterisation
Fabrication and Assembly
Health and Safety and Regulatory Compliance
Workshop and Laboratory Best Practices
Supporting facility tours and contributing to outreach events
We are looking for applicants who have a genuine interest in engineering and technology, ideally with some hands-on experience through school, hobbies, or personal projects such as mechanical work, electronics, or building and repairing things. Successful candidates will be curious about how things work and enjoy problem-solving, showing an innovative mindset and a willingness to experiment, learn new skills, and learn from mistakes.
Applicants should be motivated and enthusiastic, demonstrating a proactive approach to learning and personal development. The ability to work well as part of a team is important, along with good communication skills to collaborate with peers, supervisors, and academic staff. Strong attention to detail, organisational skills, and the ability to prioritise tasks are essential for balancing workplace responsibilities with academic study. We also value individuals who are adaptable and resilient, able to work in a dynamic environment and confident in asking questions and seeking feedback to support their learning and development.
Following shortlisting, successful stage 1 applicants will be invited to WMG’s Technical Apprentice Assessment Day.
Technical Apprentice Assessment Day: Saturday 25th April 2026.
For further information regarding the skills required for this role please see the personal specification section of the attached job description.Training:Warwickshire College University Centre, Rugby for Level 4 HTQ (1 Day a week, term-time only).
Warwick Trident College for practical workshop units (1 Day a week, term-time only).Training Outcome:Following completion of the apprenticeship, apprentices are encouraged to apply for roles within the WMG Technical Services Team. The skills and experience gained throughout the programme provide a strong foundation for a range of technical roles across different specialist areas.
The hands-on training and exposure to advanced facilities enable apprentices to support research, teaching, and industry projects, while developing expertise in areas that align with their interests and WMG’s technical needs. Many apprentices go on to build successful technical careers within WMG.
Employer Description:Employer information
WMG Technical Apprenticeship Webpage
https://warwick.ac.uk/fac/sci/wmg/about/careers/wmg-technical-apprenticeships/
WMG Webpages
https://warwick.ac.uk/fac/sci/wmg/
University of Warwick Webpage
http://www2.warwick.ac.uk/
For More information surrounding the apprenticeship standard
https://skillsengland.education.gov.uk/apprenticeships/st0841-v1-4
Apprenticeship End Point Assessment Criteria
https://www.instituteforapprenticeships.org/media/4055/st0841_engineering-manufacturing-technician_l4_ap-for-publication_050320.pdf
For more information on WCG courses
Engineering Manufacturing Technician: Level 4 Apprenticeship
https://wcg.ac.uk/course/info/3745Working Hours :Working Hours:
Monday to Thursday: 8:00 a.m. – 4:00 p.m.
Friday: 8:00 a.m. – 3:00 p.m.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Genuine interest - engineering....Read more...
