Mechanical Maintenance Engineer – Monday to Friday - Commercial Building – Moorgate, London - £42,000 Per annumMy client is looking for a Mechanical Maintenance Engineer based in Moorgate, London. The successful candidates will be mechanically biased (C&G / NVQ) with a proven track record in commercial building maintenance. Working with the maintenance team on site (team of 4), He or she will be required to carry out electrical, mechanical and fabric maintenance to the following. In return, the company are offering a competitive salary of £42,000, further training and career progression. Package & Hours of work£42,000 Basic SalaryMonday to Friday 08:00 am to 17:00 pmUniform and Tools ProvidedCycle-to-work scheme22 days holiday rising to 25 daysOvertime Available1 in 4 call out, £100 standby allowanceAnnual pay reviewKey Duties & ResponsibilitiesMonitor mechanical plantPumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Units (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toilets, replacing taps, washers etcMonitor the BMS systems.Basic electrical duties (Lamp changes etc)General building fabricEscort specialist subcontractorsRequirementsMechanically qualified level 2 (C&G, NVQ etc)Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skills If you are interested, please get in contact with Alex Denton of CBW Staffing Solutions.....Read more...
Mechanical Maintenance Engineer – Single Man Site - Commercial Building – Canary Wharf, London - £45,000 Per annumMy client is looking for a Mechanical Maintenance Engineer based in Canary Wharf, London. The successful candidates will be mechanically biased (C&G / NVQ) with a proven track record in commercial building maintenance. Working on a single person site, He or she will be required to carry out electrical, mechanical and fabric maintenance to the following. In return, the company are offering a competitive salary of £45,000, further training and career progression. Package & Hours of work £45,000 Basic SalaryMonday to Friday 08:00 am to 17:00 pmUniform and Tools ProvidedKey Duties & ResponsibilitiesMonitor mechanical plantPumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Units (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toilets, replacing taps, washers etcMonitor the BMS systems.Basic electrical duties (Lamp changes etc)General building fabricEscort specialist subcontractorsRequirementsMechanically qualified level 2 (C&G, NVQ etc)Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skills If you are interested, please get in contact with Ben Miller of CBW Staffing Solutions.....Read more...
Our client is a UK leading manufacturer within their sector and is now looking to extend their engineering division with an Electrical Maintenance Engineer. This is for one of their manufacturing sites within the Northwest area of Leicester.The basic salary is £51K with a KPI bonus plus overtime is paid at a premium of x1.5, with current OT available to circa 8,500 per annum. This totals an OTE minimum earning of £60K+The shift pattern is 5 Days On, 5 Off, 5 Nights On, 5 Off, 4 Days On, 4 Off. (06:00-18:00 / 18:00-06:00).The company is a UK leading, specialist manufacturer within its field and has a strong, well-respected reputation that’s continued for over 100 years. They are a very organised, fast paced and efficient company who have strong management structures in place along with state-of-the-art modern technology and machinery. Anyone who has the opportunity to work for this company is provided with consistent training, development opportunities and up skilling.What’s in it for you as a Electrical Maintenance Engineer
Basic salary of £51K plus a KPI bonus
TRAINING & DEVELOPMENT - Our client aims to operate to world-class standards and the successful candidate will be required to commit to a focused programme of training and development programme such as PLC training
Company pension matched to 10%
Generous holiday allowance
Overtime opportunities paid at a premium of x1.5 for those who want it.
Roles and Responsibilities of an Electrical Maintenance Engineer
Responsible for plant wide proactive and reactive Electrical Maintenance activities to ensure the optimum performance of the factory.
Carry out PPM schedules and Reactive Maintenance Activities as required.
Carry out work upon all electrical elements such as motors, invertors, safety circuits, performing basic fault finding on PLC’s etc. Extensive training will also be provided on Siemens PLC S7 TIA portal systems along with further upskilling opportunities.
To Be Successful as an Electrical Maintenance Engineer
You will need to hold the following Electrical Vocational and Technical qualifications to be considered: City and Guilds Level 3 AND BTEC Level 3 or higher with NVQ Level 3, OR be Apprentice trained to level 3 or equivalent.
Strong planned and reactive electrical maintenance experience within a manufacturing environment as an Electrical Maintenance Engineer
In return, you will be offered a truly varied role within a dynamic and a fast-paced business, providing opportunities to develop your skill sets and progress your career.....Read more...
JOB DESCRIPTION
Title: Continuous Improvement Engineer
Who We Are:
Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
Position Summary:
The Continuous Improvement Engineer will be a part of Carboline Global Continuous Improvement Team supporting the development and execution of continuous improvement projects at the Lake Charles, LA manufacturing facility. The person in this role will serve as a key resource to support plant optimization efforts regarding capacity, cost, safety, quality, and environmental improvements.
Essential Functions:
Understanding of Lean Manufacturing/Continuous Improvement methodologies and ability to teach and model them. Investigating shortfalls, issues, and complaints in current business processes. Ability to influence, mentor, and coach to get results through others. Collaborates with operations manager and/or plant engineering on modification of equipment and processes to reduce cost and improve efficiency and quality. Works together with R&D, engineering, and plant resources to develop and implement continuous improvement projects. Collaborates with R&D on process development - Including reviewing and approving proposed manufacturing procedures for new products. Provides technical support and consultation to the Quality Control department. Specifically, regarding recovery plans for off-specification, obsolete, and problem finished goods. Monitors the consistency of production using SQC, SPC, or other appropriate techniques. Strong communicator with top-notch presentation skills who can develop and provide training to production personnel on matters concerning formulation, materials handling, processing, and quality procedures. Follow all environmental rules and regulations to ensure hazardous materials and waste are managed in an environmentally responsible manner. Leadership role in effort to recertify and reclaim Non-Conforming material. Works in coordination with QC and R&D to isolate, test and recertify Non-Conforming material that can be repackaged and sold. Observing production processes, conducting research, and finding ways to increase efficiency and quality. Continuously challenging the status quo understood as a day-to-day activity in our operating areas. Proactive problem solving based on statistical analysis of corrective actions / assigned by Engineering Director, Plant Manufacturing Manager, QA, EHS projects. Selection and development of tools and fixtures for improvements. Perform additional duties as assigned. Commitment to the Company's Safety and Quality programs. Take an active role in hazard recognition and injury prevention by following all safety rules & regulations.
Requirements:
4 years Chemistry, Engineering degree or equivalent experience, minimum 3 years' experience in a CI role. Formal training in Lean and/or Six Sigma methodologies preferred Green Belt. Ability to read and interpret documents such as procedure manuals, operating and maintenance manuals and safety rules. Ability to use a computer for all company required processes, procedures, and trainings.
Physical Requirements:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee must have the ability to stand for up to four hours regularly, required to use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee frequently is required to stand, walk, stoop, kneel, crouch or crawl. The employee is occasionally required to sit and climb or balance. Any function may be performed for up to four hours with no breaks.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. This position will also have the option to work from home 1 day per week after 6 months.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online!....Read more...
We are currently looking for 2 x Multi-Skilled Shift Engineers with a leading UK manufacturer. This role is Monday to Friday role and offers a salary of circa £50,000 as well as fantastic company benefits such as pension of up to 5%, overtime (x1.5/x2) and further training and career development opportunities with a company that values its employees. This is an exciting time to join the business with a planned investment due to commence imminently which brings new production lines and increases efficiencies. What's in it for you as a Multi-Skilled Shift Engineer ;
Salary of Circa £47200 per annum plus quarterly bonus ( 2024 - £3k)
In addition, you have a pension of up to 5%, Branded Workwear, Private Health Care, Modern Canteen /Washroom facilities.
Hours of work are Monday to Friday – 12 hours days and 12 hours nights – 4 consecutive days off on 2 weeks out of every 3.
Industry leading training and career development, including health and safety training, cross-skilling and upskilling such as PLC training.
Leadership and management training for those who are keen to progress their careers and demonstrate ambition.
Job security and personal career development opportunities within a market-leading, international manufacturing organisation.
Key responsibilities of Multi-Skilled Shift Engineer ;
Providing plant-wide electrical maintenance service, departmental support and repairs on a wide range of machinery such as invertors, motors, conveyor-based systems, panels, PLC's and automation machinery
Within the position you will have the opportunity to be involved with a wide range of maintenance operations and projects, which will be supported by a wide range of training opportunities, including accredited training programs.
The ability to work within a skilled team of engineers permanently.
PPM and reactive maintenance of industrial scale production machinery.
Experience and Qualifications Required for Multi-Skilled Shift Engineer ;
Engineering qualified by either a full Advanced Electrical Apprenticeship (Level 3) OR NVQ Level 3 AND BTEC Level 3 in Electrical Engineering - UK equivalent Electrical Engineering qualifications to Level 3.
The ability to work within a fast-paced manufacturing environment undertaking PPM and TPM activities.
Previous experience in undertaking maintenance within a fast-paced manufacturing environment.
Ability to fault find, repair and provide solutions to Electrical problems.
....Read more...
Recruit4staff are proud to be representing their client, a leading building services company in their search for a Maintenance Electrician to work across multiple sites in Coventry For the successful Maintenance Electrician our client is offering:
Up to £42,000 per annum (Depending on experience)Mon-Fri, 40 hours per weekPermanent RoleCompany van and tools 25 days holiday plus bank holidaysPaid travel time
The role – Maintenance Electrician:
Performing electrical testing, inspection, and fault diagnosis on electrical systems and installations. Undertaking EICR's for a range of commercial installationsIdentifying issues and performing remedial works when neededClient facing to identify issues and/or discuss works neededEnsure all testing equipment is properly maintained and calibratedPPM and reactive maintenanceElectrical maintenance on emergency lighting, fire alarms, control systemsMechanical maintenance on HVAC systems and plant roomsGeneral maintenance such as basic joinery and plumbing work Accurately recording PPM, reactive, and condition check data on the work app.
What our client is looking for in a Maintenance Electrician:
NVQ Level 3 or equivalent in electrical engineering - ESSENTIALCity & Guilds 2391 or an equivalent qualification in Testing & Inspection - BENEFICIAL18th Edition Electrical Qualification: Up-to-date certification required - ESSENTIALPrevious experience with electrical test & inspection - ESSENTIALPrevious experience in FM or building management servicesFull Drivers License - ESSENTIALPrevious experience with mechanical/ HVAC maintenance - PREFERRED
Key skills or similar Job titles: Electrician, Electrical Engineer, Maintenance Electrician, Test & Inspection, Electrical Engineering, Electrotechnical Technology, M&E Engineer, Facilities Engineer, Facilities Electrician, Building Services ElectricianCommutable From: Coventry, Birmingham, Rugby, Warwick, Nuneaton For further information about this and other positions please apply now. This vacancy is being advertised on behalf of Recruit4staff (NW) Limited who are operating as a recruitment agency, agent, agencies, employment agency or employment business.
....Read more...
Our client is an international market leading manufacturing group. With plans for future investment across the site, they are now seeking an engineering maintenance manager to take their maintenance capabilities to the next level.The Engineering Manager will be based at their flag ship site in the Walsall area.This is an exciting opportunity where you will manage all aspects of engineering maintenance and project engineering activities, implementing new maintenance plans and developing the maintenance team through training, coaching and mentoring.As the Engineering Maintenance Manager, you will lead Engineering Projects on site and a maintenance team, undertaking the development of maintenance systems, legislative requirements and value engineering will also be part of this role as Engineering Manager.What’s in it for you as Engineering Maintenance Manager:
£70/75k base, 10% bonus, double digit pension, health care packages, shopping discounts and associated benefits you would associate with a prestigious manufacturer such as this.
Unrivalled opportunities for both training and career progression, supported with training covering ILM, NEBOSH and upskilling
Career progression available into group engineering and/or operational management positions within the Region and/or UK
Days based position Monday to Friday
Duties of Engineering Maintenance Manager
Working within a manufacturing environment as an engineering manager, leading teams of maintenance engineers
Implementation of projects and systems including PPMs and ideally TPM
Developing teams of engineers, improving plant performance and OEE
Working closely with production teams to ensure the plant is constantly improving its process
Both preventative and reactive maintenance experience, whilst driving a proactive culture, including management of R & M budget
Leading improvement projects, such as stores and parts control driving a proactive maintenance culture
The Successful Applicant as Engineering Maintenance Manager will have:
Proven engineering and maintenance experience of running multi-disciplined engineering teams, supported with a certified engineering qualification – Mechanical or Electrical engineering
The ability to take a hands on approach to challenging the status quo and driving performance forward through leadership in action
CMMS experience
Proven experience in project management in undertaking both capital and process improvements
Experience working within a manufacturing environment
Please apply now!Key Words – Engineering Manager, Chief Engineer, Manufacturing Manager, Maintenance Manager, Head of Engineering....Read more...
Air Conditioning / HVAC Maintenance Engineer - FM Service Provider - Foot Mobile / London Portfolio (Zones 1&2) - Up to £52,000Exciting opportunity to work for a family run FM service provider situated in London. CBW are currently looking for a Air Conditioning / HVAC Engineers to cover in the region of circa 60 commercial buildings located in London (Zones 1&2). The successful candidates will be mechanically / HVAC biased (C&G / NVQ) with a proven track record in commercial building maintenance. This is a Foot Mobile position and will require the successful candidates to attend a number of sites where he or she will be required to carry out PPM/Reactive maintenance to mechanical plant with particular emphasis on AHU/FCU maintenance. In return the company is offering a competitive salary paying up to £52,000 per annum based on experience/qualifications, overtime and further training.Key duties & Responsibilities Carry out PPM & Reactive maintenance on Pumps, Motors, Seals, Bearings and compressorsAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setBMS System - Monitor (i.e. Hot & Colds etc)Ensuring log books are kept up to dateEscorting specialist sub contractorsAssisting other engineersOffering technical supportThis is an M&E contract, so therefore there will be very little plumbing and fabric workHours of work Monday to Friday - 08:00am to 17:00pmRequirementsCity & Guilds / NVQ in Mechanical or Air Conditioning Level 2 F-Gas Cat 1 - (Essential)You must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceAn understanding of critical plant: Chillers, HVAC, AHU, FCU's etcMulti-skilledGood communication skillsExcellent customer service skillsYou must be happy to work on a "Foot Mobile" basis and attend multiple sites (i.e. This is not a mobile role where a vehicle is provided)PackageUp to £52,000 (Based on experience / Qualifications)Zones 1&2 Travel cardPDA's20 days holiday + BHOvertime availableTraining and development opportunitiesContributory pension schemePlease send your CV to Charlie Long at Cbw Staffing Solutions for more information....Read more...
The Engineering Supervisor vacancy is working at a market leading FMCG Manufacturing firm. It is working with a market-leading manufacturing group at a world class facility. This opportunity offers fantastic company benefits such as competitive pension, premium overtime available, plus extensive accredited OEM training and personal development opportunities, with a route through to Engineering Management group roles.The business truly values its employees which is reflected in the generous package and site facilities. This is an exciting time to join the business with the multi-million CAPEX due to complete soon, which bring industry-leading production and operational facilities.What’s in it for you as Engineering Supervisor:
Salary circa £65,000
Production bonus
Location - Stanford-le-Hope
Competitive pension
Hours of work – 4 on 4 off shift pattern
Employee benefits program
Genuine career progression into group roles
OEM Training and career development, including health and safety training, management training (ILM) & IOSH, cross-skilling and upskilling
The ability to work within a skilled team of engineers permanently
Key responsibilities of Engineering Supervisor
The leadership of Engineering teams, covering both automated and semi-automated parts of the plant
International Management Skills, The development and promotion of lean manufacturing techniques,
To identify opportunities to further automate manufacturing processes
To develop multi-functional / flexible manufacturing teams across operations
Implement and push Engineering KPIs across the site
Experience and Qualifications Required for Engineering Supervisor
Engineering qualified; City & Guilds, ONC, BTEC Level 3, NVQ Level 3, Apprenticeship or equivalent in Electrical or Mechanical Maintenance
Previous experience as an Engineering Team Leader, Maintenance Supervisor, Engineering Manager, Maintenance Manager, Engineering Planner Lead Engineer etc
Strong Health and Safety awareness
Previous experience of undertaking maintenance within a manufacturing environment
Previous experience of the development and application of PPM activities
This position would suit, Engineering Team Leader, Engineering Supervisor, Engineering Manager, Maintenance Engineer, Maintenance Manager....Read more...
The Engineering Supervisor vacancy is working at a market leading FMCG Manufacturing firm. It is working with a market-leading manufacturing group at a world class facility. This opportunity offers fantastic company benefits such as competitive pension, premium overtime available, plus extensive accredited OEM training and personal development opportunities, with a route through to Engineering Management group roles.The business truly values its employees which is reflected in the generous package and site facilities. This is an exciting time to join the business with the multi-million CAPEX due to complete soon, which bring industry-leading production and operational facilities.What’s in it for you as Engineering Supervisor:
Salary circa £65,000
Production bonus
Location - Stanford-le-Hope
Competitive pension
Hours of work – 4 on 4 off shift pattern
Employee benefits program
Genuine career progression into group roles
OEM Training and career development, including health and safety training, management training (ILM) & IOSH, cross-skilling and upskilling
The ability to work within a skilled team of engineers permanently
Key responsibilities of Engineering Supervisor
The leadership of Engineering teams, covering both automated and semi-automated parts of the plant
International Management Skills, The development and promotion of lean manufacturing techniques,
To identify opportunities to further automate manufacturing processes
To develop multi-functional / flexible manufacturing teams across operations
Implement and push Engineering KPIs across the site
Experience and Qualifications Required for Engineering Supervisor
Engineering qualified; City & Guilds, ONC, BTEC Level 3, NVQ Level 3, Apprenticeship or equivalent in Electrical or Mechanical Maintenance
Previous experience as an Engineering Team Leader, Maintenance Supervisor, Engineering Manager, Maintenance Manager, Engineering Planner Lead Engineer etc
Strong Health and Safety awareness
Previous experience of undertaking maintenance within a manufacturing environment
Previous experience of the development and application of PPM activities
This position would suit, Engineering Team Leader, Engineering Supervisor, Engineering Manager, Maintenance Engineer, Maintenance Manager....Read more...
Foot Mobile Maintenance Engineer - FM Service Provider - Foot Mobile - Up to £45,000 + Zones 1 & 2 Travel Card Exciting opportunity to work for a Growing FM service provider situated in London. CBW is currently looking for Foot Mobile Maintenance Engineer to cover a variety of sites in central London. The successful candidates will have a proven track record in commercial building maintenance. This is a Foot Mobile position and will require the successful candidates to attend a variety of sites where he or they will be required to carry out PPM/Reactive maintenance to electrical and mechanical plants with particular emphasis. In return, the company is offering a competitive salary paying up to £45,000 per annum based on experience/qualifications, overtime and further training. The company are expanding and looking for engineers to grow with them. Package & working hoursUp to £45,000Zones 1 & 2Monday to Friday - Hours: 08:00am to 17:00pmPDA's25 days holiday + Bank HolidaysOvertime availableTraining and development opportunitiesContributory pension schemeKey Duties & ResponsibilitiesEmergency lighting and fire alarm testingPumps, Motors, Seals, BearingsBooster sets Heating systems Air Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsBMS System - Monitor (i.e. Hot & Colds)General building fabricMonitor mechanical plantRequirementsElectrically Or Mechanically qualified - Level 2 or 3City & Guilds - 18th EditionYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceAn understanding of commercial building maintenanceMulti-skilledGood communication skillsExcellent customer service skillsYou must be happy to work on a "Foot Mobile" basis and attend multiple sites (i.e. This is not a mobile role where a vehicle is provided)If you are interested please email your CV to Dan Barber of CBW Staffing Solutions ....Read more...
Junior Maintenance Engineer (Electrical or Mechanical) - FM Service Provider - Commercial Building - City of London- £35,000 - £40,000Are you looking for a way into maintenance?Are you looking for a role in Central London?Are you electrically or mechanically qualified?If the answer is yes, then read on....An exciting opportunity to join an established building services company based in London has arisen! CBW Staffing Solutions are currently recruiting a Junior Maintenance Engineer either of an electrical, mechanical, or plumbing background, to be based in a commercial building in the City of London. He or she or they will be required to carry out planned and reactive building maintenance alongside the maintenance team on site. This person will be working closely with a senior member of the team and the team on-site to gain experience and training of building services.The successful candidate will understand Facilities Maintenance and have some experience in building maintenance. In return, the company is offering a competitive salary of up to £40,000, overtime, plenty of further training and a potential route into further career progression. Hours of workMonday to Friday – 08:00 am to 17:00 pm25 days holiday + Bank holidaysOvertime availableFurther trainingCompany pensionKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting tests & Fire alarm tests Plant room maintenanceAir Handling Units / Fan Coil Unit (Filter changes, cleaning)Control PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsRequirementsElectrically qualified - City & Guilds Level 3 or mechanically City & Guilds Level 2Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceHard working attitudeGood communication skillsClient FacingIf you are interested please email your CV to Alex Denton of CBW Staffing Solutions....Read more...
Mechanical Maintenance Engineer (Shift) An excellent opportunity has arisen for an Mechanical Bias Maintenance Engineer to join our team based in St Neots on a permanent basis. You will be responsible for the maintenance and repair of process equipment for the maintenance department ensuring that the equipment is reliable and working optimally to improve plant and building performance. Job Responsibilities
To ensure a high standard of maintenance to attain factory performance goalsElectrical setup and production supportFault finding and repair of breakdownsTo be fully aware of factory safety issues and work in a safe manner at all timesPerformance of Preventive MaintenanceFabrication and installation of Plant and Machinery under supervision.
Person Specification
Experience of Production equipment, maintenance in a diverse factory environmentGood diagnostic skillsMechanical maintenance experienceComputer literate (stores systems and Maintenance Management Systems)
Hours of WorkYou will start training on the day shift and then move onto your set shift pattern where you'll be rostered to work 1758 hours per annum. This consists of 143 rostered 12 hours and 15 minutes shifts (usually between the hours of 6.45am to 7pm, 6.45pm to 7am) and one 6-hour training session. The Shift pattern is:
2 dayshifts
6.45am to 7pm
2 night shifts
6.45pm to 7am
6 days off
The Company will aim to give at least 2 weeks' notice if a change to the published roster is required. Holiday entitlement is built into time off shift so the employee cannot book days off. They can do shift swaps to create more time off.Pay and Benefits
£250 annual tool allowanceOvertime availableOnsite free parkingChildcare vouchersCompany pension up to 10% company contribution
....Read more...
Recruit4staff is proud to be representing their client a leading Food Manufacturer, in their search for a Multi-Skilled Maintenance Engineer in Leeds.For the successful Multi-Skilled Maintenance Engineer, our client is offering:
Starting salary of up to £48,000 per annum Monday – Friday, Days rolePermanent ContractAnnual Pay ReviewEmployer pension matched up to 6%X4 annual salary life assurance coverFlexible benefits, including additional holiday purchases and retail discountsStrong career development opportunities, with both internal and external training
The Role – Multi-Skilled Maintenance Engineer:
Heavily focussed on planned preventative maintenance and contributing to continuous improvement projects Execute planned and scheduled maintenance to prevent failures and optimize asset reliability.Identify and source necessary spare parts.Follow and update the engineering plan, providing feedback as needed.Improve maintenance execution across all areas.Act as an ambassador for safety and food quality, following protocols such as LOTO and Permit to Work.Contribute actively to daily, weekly, and monthly meetings.Record all maintenance activities using SAP CMMS and FastWork.Maintain technical standards, including SOPs, SMPs, and work instructions.Lead root cause analysis and continuous improvement initiatives.Provide technical input into CAPEX projects.Train and support skill development within operations and engineering teams.
What our client is looking for in a Multi-Skilled Maintenance Engineer:
NVQ Level 3 in Engineering Maintenance or equivalent – ESSENTIALModern Advanced Level Apprenticeship completed – DESIRABLEPrevious experience in a similar role within a manufacturing environment - ESSENTIALFamiliarity with maintenance tools such as CBM, RCA, FMECA, and CMMS (SAP PM) – DESIRABLEStrong analytical skills and the ability to identify and solve problems proactively.Excellent communication and teamwork skills.
Key skills or similar Job titles: Maintenance Technician, Preventive Maintenance Engineer, Asset Reliability Technician, Plant Maintenance Engineer, Equipment Maintenance Technician, Manufacturing Maintenance Engineer.
Commutable From: Bradford, Harrogate, York, Wakefield, Barnsley, Doncaster, Huddersfield, Oldham.
For further information about this and other positions, please apply now.This vacancy is being advertised on behalf of Recruit4staff (Wrexham) Limited, which is operating as a recruitment agency, agent, or employment business.....Read more...
Static AC Engineer – FM Service Provider – Data Centre – Canary Wharf, London – up to £50,000 per annum - No Call out – Free Parking CBW Staffing Solutions are currently recruiting a Static AC Engineer to based on a critical data centre in Canary Wharf, London. He or she will be required to carry out planned and reactive building works across the AC units on the site. In return, the company is offering a competitive salary of up to £50,000, overtime, further training and a potential route into further career progression. In return, my client is offering a very competitive package including:A basic salary of up to £50,000Monday to Friday – 07:00 am – 16:00 pmNo Call outParking on site25 days holiday plus bank holidaysOvertime availableCompany Pension SchemeExcellent career progression opportunitiesKey Duties & ResponsibilitiesResponsible for the maintenance and repairs of AC units around the various sites, within set time frames so that customer expectations are met.To actively undertaken proactive maintenance work identified across the account and division as required.Effective H&S compliance and to report of any breaches to H&S compliance.Ensure that routine PPM is carried out to all AC plant in accordance with Site task schedules and asset lists.Ensure that reactive tasks throughout the portfolio are completed and be proactive in highlighting areas where improvements can be made.Complete all logbooks and F-Gas registers as required in order to ensure fully compliance with law and approved code of practice.Ensure that suitable spares are available to carry out both maintenance and reactive works.To provide parts lists and estimated timescales to carry out remedial works. Ensure that all relevant paperwork and F-Gas register is completed regarding PPM, reactive and breakdown works and that it is passed without delay to the contract administrator.RequirementsAC qualified - City & Guilds Level 2 F-Gas qualification (Essential)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient FacingPlease send your CV to Alex Denton of CBW Staffing Solutions to avoid missing out on the role !....Read more...
We are looking for a Senior Regional Service Engineer to join a dedicated service team, where you will play a pivotal role in upholding the Karcher brand while delivering exceptional service to their customers. For this role you will predominantly, maintain and repair equipment.
This role offers an exciting opportunity to contribute to the growth and success of Karcher by providing first class professional service and support for industrial cleaning equipment.
Key Responsibilities for the Senior Regional Service Engineer
Maintain a high standard of service and repair on all cleaning equipment, ensuring world-class service delivery
Communicate regularly with the Regional Service Manager to coordinate activities and address customer needs
Diagnose and repair a wide range of industrial cleaning equipment, including municipal machinery
Complete work orders promptly and accurately, maintaining meticulous records
Manage stock in accordance with customer requirements, ensuring optimal inventory levels
Collaborate with the regional scheduler to optimise efficiency and customer satisfaction
Identify and communicate sales leads to the relevant sales personnel, contributing to business growth
Develop positive relationships with customers and internal teams
Participate in on-the-job coaching and personal development activities
Experience, attributes and skills required for the Senior Regional Service Engineer
Proficiency in electronics, batteries, hydraulics, pneumatics, mechanical, and diesel engines
Experience with municipal cleaning equipment, fork trucks, HGVs, plant hire, horticultural, or agricultural machinery is advantageous.
Proven experience in the service and/or cleaning industry is preferred, or willingness to undergo fast-track training
Excellent communication skills and ability to work effectively in a team environment
Strong organisational skills with the capacity to manage multiple tasks efficiently
A full UK driving license is essential, with willingness to travel and stay overnight as required
Passport for potential training in Germany is preferred
What’s in it for You
This is a great opportunity to join a market leader, who offers a collaborative culture and progression opportunities. The starting salary offered is £38,760 rising to £40,000 after probation, based on a 40 hour week Monday – Friday with OTE £50K with overtime. You will receive a fully expensed vehicle, with optional private use, all tools provided. You will receive 25 days holidays, plus bank holidays and your Birthday too, progression opportunities, pension scheme, end of year discretionary bonus, health plan, critical illness cover, sick pay, staff discounts, plenty of social events and more!
....Read more...
We are looking for a Senior Regional Service Engineer to join a dedicated service team, where you will play a pivotal role in upholding the Karcher brand while delivering exceptional service to their customers. For this role you will predominantly, maintain and repair equipment. This role offers an exciting opportunity to contribute to the growth and success of Karcher by providing first class professional service and support for industrial cleaning equipment.
Location Requirements
To ensure efficient coverage, candidates must be based within 1 hour of the SM4 postcode (Morden, London), ideally in or near the following areas:
London Areas & Surrounding Locations:
SW, SE, E, NW, W, N Postcodes
TW (Twickenham), KT (Kingston), SM (Sutton), CR (Croydon), BR (Bromley), DA (Dartford), UB (Uxbridge), RM (Romford)
Key Responsibilities for the Senior Regional Service Engineer
Maintain a high standard of service and repair on all cleaning equipment, ensuring world-class service delivery
Communicate regularly with the Regional Service Manager to coordinate activities and address customer needs
Diagnose and repair a wide range of industrial cleaning equipment, including municipal machinery
Complete work orders promptly and accurately, maintaining meticulous records
Manage stock in accordance with customer requirements, ensuring optimal inventory levels
Collaborate with the regional scheduler to optimise efficiency and customer satisfaction
Identify and communicate sales leads to the relevant sales personnel, contributing to business growth
Develop positive relationships with customers and internal teams
Participate in on-the-job coaching and personal development activities
Experience, attributes and skills required for the Senior Regional Service Engineer
Proficiency in electronics, batteries, hydraulics, pneumatics, mechanical, and diesel engines
Experience with municipal cleaning equipment, fork trucks, HGVs, plant hire, horticultural, or agricultural machinery is advantageous.
Proven experience in the service and/or cleaning industry is preferred, or willingness to undergo fast-track training
Excellent communication skills and ability to work effectively in a team environment
Strong organisational skills with the capacity to manage multiple tasks efficiently
A full UK driving license is essential, with willingness to travel and stay overnight as required
Passport for potential training in Germany is preferred
What’s in it for You
This is a great opportunity to join a market leader, who offers a collaborative culture and progression opportunities. The starting salary offered is £38,760 rising to £40,000 after probation, based on a 40 hour week Monday – Friday with OTE £50K with overtime. You will receive a fully expensed vehicle, with optional private use, all tools provided. You will receive 25 days holidays, plus bank holidays and your Birthday too, progression opportunities, pension scheme, end of year discretionary bonus, health plan, critical illness cover, sick pay, staff discounts, plenty of social events and more!....Read more...
This Maintenance Manager position is to join a leading Chemical manufacturing company specialising in the manufacture of bespoke resins. The role is a days based position Monday to Friday on average of 37 hours a week for a salary of £60,000 per annum.The main purpose of a Maintenance Manager is to ensure the safe and continuous production of the plant by swiftly responding to any equipment failures and to implement an effective preventive plan. All aspects of site operations must be completed in a safe, timely and professional manner.
Taking this opportunity as Maintenance Manager would mean working for a leading global producer of chemical products. This is a key manufacturing company relied on by many industries and this Maintenance Manager role is critical to ongoing operation.
Responsibilities of a Maintenance Manager:
Ensure the effectiveness of your Department and the team.
Support the effective running of production.
Ensure MWR system is managed effectively, and the Piranha system kept up to date.
Engineering Risk Assessments maintained.
Ensure the site Permit to Work system is adhered to.
Trained mechanical engineer
Manage and lead projects and improvements.
The client has asked that all candidates that do apply must have at least 5 years’ experience working and have completed an Mechanical qualification and must have experience working on both an ATEX or chemical site as a Maintenance Manager.
Please apply directly for further information regarding this Maintenance Manager role we are recruiting for.....Read more...
Mechanical Plumber – FM Service Provider – Guildford, Surrey – £40,000 - Monday - Friday 08:00 - 17:00CBW Staffing Solutions is currently recruiting a mechanical plumber to carry out planned and reactive commercial maintenance across a large healthcare site. The successful candidate will have a strong understanding of facilities maintenance and a proven track record in commercial building maintenance.This position would be ideal for a Maintenance Plumber or mechanical engineer currently in a similar position who is keen on progression. In return, the company is offering a competitive salary of up to £40,000, which is a potential route into further career progression.Hours of Work & Package InformationBasic Salary of £40,000Monday to Friday 08:00 am – 17:00 pm 25 days holiday + Bank HolidaysFree Parking on siteTablet & Work Phone ProvidedFull company uniform Key Duties & ResponsibilitiesMonitor mechanical plant60% of the work involved is plumbing work (Unblocking toilets, replacing taps, washers etc)Pumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Basic electrical duties (Lamp changes etc)General building fabricEscort specialist sub contractorsRequirementsPlumbing - City & Guilds Level 2 (Essential)Plumbing – City & Guilds level 3 (Preferred)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient Facing....Read more...
Mechanical Plumber – FM Service Provider – Guildford, Surrey – £40,000 - Monday - Friday 08:00 - 17:00CBW Staffing Solutions is currently recruiting a mechanical plumber to carry out planned and reactive commercial maintenance across a large healthcare site. The successful candidate will have a strong understanding of facilities maintenance and a proven track record in commercial building maintenance.This position would be ideal for a Maintenance Plumber or mechanical engineer currently in a similar position who is keen on progression. In return, the company is offering a competitive salary of up to £40,000, which is a potential route into further career progression.Hours of Work & Package InformationBasic Salary of £40,000Monday to Friday 08:00 am – 17:00 pm 25 days holiday + Bank HolidaysFree Parking on siteTablet & Work Phone ProvidedFull company uniform Key Duties & ResponsibilitiesMonitor mechanical plant60% of the work involved is plumbing work (Unblocking toilets, replacing taps, washers etc)Pumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Basic electrical duties (Lamp changes etc)General building fabricEscort specialist sub contractorsRequirementsPlumbing - City & Guilds Level 2 (Essential)Plumbing – City & Guilds level 3 (Preferred)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient Facing....Read more...
Our client is a leading engineering business that has been established for over half a century providing mechanical handling solutions to many industries across the globe.They are looking to strengthen their projects & design team by recruiting an additional Applications Engineer to their successful team on a permanent basis.If you have previous design (3D), applications and or project experience within materials handling equipment (conveyors) or sheet metal industry experience and are looking to join a highly stable company who can offer a competitive salary then apply now for immediate consideration.Applications Engineer• Design plant layouts and engineering solutions for the Sales department using 3D software (SolidWorks) and 2D software;• Learn about and use 3D software and related applications in order to improve the clarity and appeal of our Sales designs;• Offer all reasonable design and technical support to the Sales, Marketing, Engineering, Projects and R&D departments within the Company when needed.Applications Engineer – Sales and Marketing Duties• Create 3D layouts of company equipment for sales projects.• Ensure our Sales designs and layouts are visually appealing, occupy a minimum footprint, follow the Company’s design rules, and offer a clear concept to our customers.• Pick up a Sales enquiry and devise what is needed for the 3D layout. (This can follow with time but we need to reduce the current bottleneck of Sales people having to coordinate all tasks on a project.• The Applications Engineer should, with time, be able to understand an incoming enquiry and begin the technical tasks, particularly the drawing work, without waiting for instruction from others).• In time, work alone to configure equipment and systems and set these out in 3D for the Sales department.• Create a library of 3D, plug-and-play Sales models for all company products. These models are to be compatible with our end-product designs so that our Sales layouts contain accurate sizings and flows but are fast to create.• Create low-res shells of the Engineering modules making up our standard products. These shells are to be accurate for use by both the Sales and the Engineering department in General Arrangement drawings.• Produce designs and 3D views for the Company’s Marketing tools and OMIs.• Follow the latest developments in 3D software, and in our sector, and use this knowledge in the Company’s design output to improve the Company’s strike-rate in sales.This includes:• Animating designs to show materials flowing over the system, access areas and maintenance tasks for operators, flybys and 360-degree views, all in minimised file sizes• Linking our 3D designs to laser site scans to show new 3D designs in existing site locations• Producing First Person walkthroughs for the customer to control• Creating a configurator of 3D blocks on our website to allow users to build up a Sales layout with our products for the Company to quote• Linking 3D layout software to our project programmes in MS Project to show site build phases in 3D against the runtime of the programme in MS Project• Find other such combinations and possibilities to make our Sales designs inspiring to our customers, stakeholders, suppliers and those following us in the media.• Create a database of all customer sites and list what company equipment is in use there with latest drawings and photos.• Produce attractive flow diagrams to show in simple form what the 3D design is doing with the materials it is processing (in MS Visio or similar).• Create mass balances of materials flowing and dividing over the 3D layout (this is a rare requirement, but it would be very handy).• Provide monthly reports detailing statistical information relating to sales, if required.• Attend site as and when necessitated by the circumstances of a particular project.• Assist members of the Sales team during tender submissions.• Benchmark competitor marketing activity/techniques, as well as those used outside our sector to maximise the effectiveness of our Sales design output.Applications Engineer – General Engineering Duties• Carry out engineering work for the Projects department in the form of Project Engineering tasks and/or detailed design to help release work to the factory, if needed.• Take time to understand the design-to-manufacture process in order to suggest improvements based on your experience e.g. automated BOM creation from SolidWorks.• Help write and develop company Design Rules• Help create a Library of Machines containing all the pertinent information we collectively hold about every product integrated in our layouts.• Work on the development of any standard or non-standard machines and applications.• Work on the Company’s ongoing Product Standardisation programme and its improvements programme.• Produce drawings for new products and to offer input on any R&D project occurring within the Company.Applications Engineer previous suitable job titles: Design Engineer, Project Engineer, Project Design Engineer, 3D CAD Technician, 3D Design Technician, 3d Design Engineer, Draughtsperson, Mechanical Design Engineer, Mechanical Design Technician, Proposal Engineer
Commutable from: Kettering, Market Harborough, Leicester, Wellingborough, Corby, Northampton etc...Please apply ASAPDue to current high volumes of applications to our advertised jobs, we are unable to respond to every application. All successful candidates will be contacted as soon as possible.....Read more...
Role Overview
We are currently looking for a Controls Engineering Technician to join a leading manufacturing company based in the Plymouth area.
As the Day Shift Controls Engineering Technician, you will be working with the asset care team and providing control system support within the assembly production areas.
Key Duties and Responsibilities
Your duties as the Controls Engineering Technician will be varied however the key duties and responsibilities are as follows:
1. Implement improvements to TPM processes to increase OEE, liaise with department representatives to ensure that PM is successfully initiated and completed within the time frame.
2. Provide support to set-up and maintain pneumatic, hydraulic, and mechanical systems on production equipment.
3. Read electrical drawings, analyse, troubleshoot, and perform maintenance and repairs of any plant electrical systems (including, but not limited to, programmable controllers, servo motors, AC motors, contactors, etc.).
4. Connect to PLC machinery to help diagnose complex faults and make minor software changes, when required under the guidance of the process engineering team.
Role Requirements
To be successful in your application to this exciting role as the Day Shift Controls Engineering Technician we are looking to identify the following on your profile and past history:
1. Level 3 qualification in Electrical Engineering or Computer Science is essential.
2. Proven industry experience in working as a manufacturing engineer/technician with experience in fault finding and root cause analysis within a high-volume manufacturing environment.
3. Demonstrated knowledge and proficiency of PLC operations, robotics, Maintenance, Programming, and the ability to read schematics or machining, tooling design, tooling assembly, part drawings and pneumatic schematics.
Key Words: /Engineering Technician/ /Day Shift/ /Manufacturing/ /Plymouth/ /Production Processes/ /Mechanical Systems/ /Electro-mechanical/ /Process Improvement/ /Technical Skills/ /Leadership/Controls/Instrumentation/PLC/SCADA
Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer. We welcome applications from anyone who meets the role requirements. HRS exclusively supports the STEM sectors, combining recruitment expertise with scientific knowledge to help you advance your career.....Read more...
You’ll learn a host of civil engineering principles, such as concreting, excavation activities and drainage, as well as the processes involved in basic project management, health and safety, and levelling and setting out.
You’ll also learn fundamental building information modelling (BIM) and design principles, receive training in the civil engineering theory, and gain comprehensive practical experience in the featured categories of training.Training:The course covers practical principles in:
Drainage
Concrete
Levelling and setting out
Block paving
Kerbing
Brickwork
Excavation support
Working at height
Confined space operations
Small tools operation
Movement of plant
Manual handling
18 weeks of training delivered over 15 months at CITB Bircham Newton. Blocks 1 to 7 are 2 weeks and Blocks 8 is 4 Weeks.
Qualifications you gain:
Level 2 Construction Groundworker
Level 1 Functional Skills, working towards L2 (test must be taken)
Training Outcome:
Machine Operator, Engineer, Foreman, Manager
Employer Description:Is one of East Anglia’s leading suppliers of roads, sewers and groundworks to national and regional developers and contractors. Working on domestic and commercial projects throughout the East of England, our groundworks services include pitting, foundations, all forms of piling, masonry and finished floors.
We’re also experts in roads and sewers. Our services include new infrastructure, carriageways and footpaths, and we are Anglian water approved contractors for sewer connections.Working Hours :Monday - Friday, 7.30am - 4.30pmSkills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Logical,Team working,Initiative,Physical fitness....Read more...
Mechanical Plumber – FM Service Provider – Crawley – £38,000 - Monday - Friday 08:00 - 17:00CBW Staffing Solutions is currently recruiting a mechanical plumber to carry out planned and reactive commercial maintenance across a large commercial estate. The successful candidate will have a strong understanding of facilities maintenance and a proven track record in commercial building maintenance.This position would be ideal for a Maintenance Plumber or mechanical engineer currently in a similar position who is keen on progression. In return, the company is offering a competitive salary of up to £38,000, which is a potential route into further career progression.Hours of Work & Package InformationBasic Salary of £38,000Monday to Friday 08:00 am – 17:00 pm Free Parking on site Call out 1 in 4 Overtime avaialble 25 days holiday + Bank HolidaysTablet & Work Phone ProvidedFull company uniform Key Duties & ResponsibilitiesMonitor mechanical plant60% of the work involved is plumbing work (Unblocking toilets, replacing taps, washers etc)Pumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Basic electrical duties (Lamp changes etc)General building fabricEscort specialist sub contractorsRequirementsPlumbing - City & Guilds Level 2 (Essential)Plumbing – City & Guilds level 3 (Preferred)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient FacingPlease email your CV to Tom Gotts of CBW Staffing Solutions to avoid missing out on this role!....Read more...
Shift Engineer – Continental Shift – Commercial Building – Liverpool Street, London – £50,000 Per annum My client is looking for an Electrical or Mechanical Shift Engineer to be based in a commercial building in Liverpool Street, London. A successful candidate will be electrically or mechanically biased (C&G / NVQ). Working with the maintenance team on site, He or she will be required to carry out electrical, and mechanical maintenance. In return, the company offers a competitive salary of £50,000, further training and career progression. Package £50,000 per annumUniform and Tools ProvidedCycle to work scheme22 days holidayOvertime AvailablePensionInternal Progression & Development Hours of work Continental Shift - 4 nights, 4off, 3 days, 3 nights, 6off, 4 days - 07:00am - 19:00pm / 19:00am - 07:00am Key Duties & Responsibilities Lighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Monitor mechanical plantPlumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractors Requirements Electrically qualified level 3 or Mechanically qualified level 2(C&G, NVQ etc)18th edition (If electrically qualified)Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skillsMust be able to get to the site for 07:00 am startIf interested please send me a copy of your CV Ben Miller@ CBW staffing solutions ....Read more...
