Electrical Engineer - Bristol, St Werburgh's - Temp - FM Service Provider - Up to £23 per hour Are you an Electrical Maintenance Engineer looking for a new challenge?If the answer is yes, then read on...A Fantastic opportunity to work for a leading FM Service Provider situated in Bristol, St Werburgh's. CBW is currently looking for an Electrical Maintenance Engineer to be based in a commercial building located in Bristol. The successful candidate will be electrically biased (NVQ, C&G, 17th / 18th Edition etc) with a proven track record in commercial building maintenance. Working with the maintenance team on-site, He or she will be required to carry out electrical, mechanical, and fabric maintenance to the following.Duties & Responsibilities:Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - ResetWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsHours of work08:00am - 17:00pm Monday - Friday Starting ASAP Temp on going £22 - £23 per hour RequirementsElectrical qualified (C&G, NVQ etc)A proven track record in Building MaintenanceGood Communication Skills.Multi-Skilled - Mechanical / Electrical.Good Leadership & Management skillsIf you are interested please email your CV to Katie at CBW Staffing Solutions for more information.....Read more...
Electrical Engineer - Cardiff - Temp - FM Service Provider - Up to £23 per hour Are you an Electrical Maintenance Engineer looking for a new challenge?If the answer is yes, then read on...A Fantastic opportunity to work for a leading FM Service Provider situated in Cardiff, Ferry Road. CBW is currently looking for an Electrical Maintenance Engineer to be based in a commercial building located in Cardiff. The successful candidate will be electrically biased (NVQ, C&G, 17th / 18th Edition etc) with a proven track record in commercial building maintenance. Working with the maintenance team on-site, He or she will be required to carry out electrical, mechanical, and fabric maintenance to the following.Duties & Responsibilities:Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - ResetWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsHours of work08:00am - 17:00pm Monday - Friday Starting ASAP Temp on going £22 - £23 per hour RequirementsElectrical qualified (C&G, NVQ etc)A proven track record in Building MaintenanceGood Communication Skills.Multi-Skilled - Mechanical / Electrical.Good Leadership & Management skillsIf you are interested please email your CV to Katie at CBW Staffing Solutions for more information.....Read more...
Job Opportunity: Assembly/Production Worker (Day Shift)Location: DesboroughHours: Monday to Thursday, early finish on FridaysDescription:We are currently seeking an enthusiastic and dedicated Assembly/Production Worker to join our team at our Desborough facility. This position offers day shift hours with an early finish on Fridays, providing an excellent work-life balance.Responsibilities:
Perform assembly tasks according to set procedures and guidelines.Use mechanical tools and equipment to complete assembly tasks efficiently.Ensure quality standards are maintained throughout the production process.Work collaboratively with team members to achieve production targets.Follow health and safety protocols at all times to maintain a safe working environment.
Requirements:
Previous experience in assembly work within a factory environment preferred.Proficiency with mechanical tools and equipment.Ability to work effectively in a team environment.Strong attention to detail and commitment to producing quality work.Reliable and punctual with a positive attitude towards work.
Benefits:
Competitive hourly rate.Opportunity for long-term employment.Early finish on Fridays.Supportive team environment.
If you have the necessary skills and experience to excel in this role and are looking for a long-term opportunity, we encourage you to apply.To apply, please submit your resume and a brief cover letter outlining your relevant experience to [contact email/website].We look forward to hearing from you!XP RECRUITMENT....Read more...
Mobile Maintenance Engineer - Leeds - Salary up to £45,000 DOE CBW currently have a vacancy for a Mobile Engineer to carry out planned and reactive commercial maintenance across a commercial contract around the Leeds area. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in commercial building maintenance. This position would be ideal for a Mobile Engineer currently in a similar position. In return, the company are offering a salary of up to £45,000 with a potential route into further career progression. Key Responsibilities:Lighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsCompliance and logbooksCAFM systems (elogs and Webquote used onsite)Undertake all allocated tasks and perform them in a timely and professional manner.Person Specification:In-depth knowledge of electrical and mechanical principles and systemsPrevious experience of performing a Building Services Engineer roleMust be able to work unsupervised to a high qualityRelevant qualification in electrical or mechanical engineeringSalary & Benefits:A basic salary of up to £45,000Plenty of overtime25 days holiday + Bank HolidaysVan & Fuel CardCompany Pension SchemeExcellent career progression opportunities ....Read more...
Are you an experienced Multi Skilled Maintenance Engineer based in Nottingham with a background in the Food Manufacturing Industry looking for a new role?BENEFITS: £36-40k per annum, Monday - Friday 7.30am-4.30pm (1 hour lunch), free parking, Canteen, Pension, Overtime paid as day off in lieu, Training and Progression Opportunities, 20 days holidays plus bank holidays rising with service up to 25 days.You will be an experienced Multi Skilled Maintenance Engineer with a mechanical and electrical background and experience with reactive and preventative maintenance of machinery within the Food Manufacturing Industry.The company are a leading supplier into the the Manufacturing and Food service sectors and have a site in Nottingham. Responsibilities
Planned Preventative Maintenance
PPM Schedules
Repairs on Machinery & Equipment
Document & Monitor Down times & Breakdowns
Provide Operational Support
Adhere to H&S Policies & Procedures
Complete RAMS as and when required
Budget and Replenish Spare Parts
Key Requirements
Mechanical & Electrical Maintenance Experience
Experience working in the Food Manufacturing Industry
Knowledge of Electrical Control Systems
Electrical Qualifications (ideally 18th Edition)
Good knowledge of PLCs
Ability to work under pressure
High attention to detail
Excellent fault finding and problem solving skills
Excellent communication skills
Nice to have
Tig Welding Experience
Interested? Please contact Emma Stevens on 01332 317 213 or email your CV ....Read more...
Position: Plant Fitter
Location: Oldham
Salary: £35,000 - £45,000 per annum (depending on experience)
About Us:
My client are a leading company in Oldham specializing in the maintenance, repair and hire of plant machinery and are looking for a skilled Plant Fitter to join our team.
Key Responsibilities:
Carry out maintenance, repairs, and inspections on a variety of plant machinery both in the field and within our workshop.
Diagnose faults, troubleshoot issues, and perform necessary repairs to ensure equipment operates efficiently and safely.
Conduct routine servicing and preventative maintenance to minimize downtime and maximize machinery lifespan.
Utilize workshop facilities for more complex repairs, ensuring work is completed to the highest standards.
Adhere to health and safety guidelines at all times, both on-site and in the workshop.
Requirements:
Previous experience as a Plant Fitter or similar role, with a strong mechanical aptitude.
Proficiency in diagnosing and repairing a range of plant machinery, including excavators, loaders, and dumpers.
Ability to work independently in the field and within a workshop environment, managing tasks effectively.
Excellent problem-solving skills and attention to detail, with a focus on delivering high-quality workmanship.
Relevant qualifications or certifications in mechanical engineering or a related field are desirable.
Benefits:
Competitive salary based on experience, with the opportunity for progression within the company.
Varied role with a mix of fieldwork and workshop-based tasks, providing opportunities for skill development.
Supportive work environment with a team-oriented approach and opportunities for training and advancement.
Company benefits package including pension scheme and healthcare options.
Chance to join a reputable company with a strong commitment to employee satisfaction and professional development.
Hammond Recruitment Group is acting as an Employment Agency in relation to this vacancy.....Read more...
Job Title: Field Service EngineerSalary: £33,000paLocation: SouthamptonWho will you be working for?Our client is an international company that can offer excellent employee benefits and support, and a positive working environment. They are growing their team of field engineers and are looking for someone to cover Southampton and the surrounding areas. As you will be in the field, working independently, experience in a similar setting would be great, someone that I able to provide top quality support and serviceWhat are we looking for?We are looking for a mechanical engineer to service and maintain their machines to company, risk assessment, compliance and safety standards. You will work closely with the support team, maintain company records and on occasion work on call over weekends. The right person will have experience servicing big machinery such as large vehicles or farming equipment.Responsibilities/skills –
Experienced in Mechanical Engineering essentialElectrical Competent, including Control panels & 400V essentialWelding & Abrasive wheels (Grinding) experience beneficialExperienced in parts fitting & assembly an advantageBasic experience in plumbing and an understanding of calibration an advantageBasic level IT, including Microsoft Office (Outlook and Excel) an advantage
Does this sound like you?If you are keen to discuss the details further, please apply today or send your cv to Hayley....Read more...
Technical Project Manager
We want to immediately hire a Project Manager / Technical Project Manager with experience of taking technical projects from conception to production. You will need experience in NPI, OEM and Tier 1 manufacturing and will ideally have an Electro Mechanical, Electronics or Design background.
As Project Manager for this role, you will ideally come from a technical background and have experience of working in an engineering, manufacturing, electronics, electrical, automotive, aerospace, agricultural vehicle / machinery or Off Highway vehicle or medical equipment sector.
Business & Global Reach:
The business is an established market leader within its field, covering OEM, Retro-Fit / Aftermarket sectors, leading innovation for product design and development for lifesaving products to optimise vehicle safety, operating globally across multiple countries.
Target Experience:
Our ideal candidate will have a very good understanding of Managing NPI Projects within major technical sectors and have the ability to lead / head up multiple projects and build relationships with colleagues and customers.
Ideally located – Kent, Greenwich, Crawley, Biggin Hill, Hornchurch, Upminster, Romford, Brentwood, Laindon, Dagenham, Surrey Quays, Rochester, Basildon, Ilford, Dartford, Gillingham, Bromley, Greenwich, Croydon, Sevenoaks, Orpington, Epsom
Salary – Circa £45k - £65k DOE plus bonus + Car / Allowance + Pension (up to 5%) + Private Medical +Eye Care Vouchers + Employee Assistance Program + 25 days Hols exc BH (Holiday entitlement increases by 1 day every 2 years) + Hybrid working
Key Skills:
Minimum 2 to 3 years NPI Project Management experience.
Must be able to manage projects from cradle to grave.
Have a technical background – Ideally Electronics, Mechanical, Electro Mechanical, Design.
Must understand the production life cycle.
Lead engineering teams and be able to liaise and support other departments.
Have an understanding and knowledge of working with and supporting OEM and Tier 1 customers.
Be comfortable working in a fast-paced environment.
Have the skill to build internal and external relationships.
Self-motivated and able to work independently.
Be a confident communicator – written and verbal.
BTEC, HNC / City & Guilds or equivalent in engineering or science discipline.
Solid PC user within key Microsoft applications.
The Next Step:
To express an interest in this role, please call Robert Cox of Glen Callum Associates Ltd for an initial confidential chat on 00 44 (0) 7398 204832 or email with your CV detailing how your experience meets with the above.
Job Ref: 4121RCA – Technical Project Manager....Read more...
Technical Project Manager
We want to immediately hire a Project Manager / Technical Project Manager with experience of taking technical projects from conception to production. You will need experience in NPI, OEM and Tier 1 manufacturing and will ideally have an Electro Mechanical, Electronics or Design background.
As Project Manager for this role, you will ideally come from a technical background and have experience of working in an engineering, manufacturing, electronics, electrical, automotive, aerospace, agricultural vehicle / machinery or Off Highway vehicle or medical equipment sector.
Business & Global Reach:
The business is an established market leader within its field, covering OEM, Retro-Fit / Aftermarket sectors, leading innovation for product design and development for lifesaving products to optimise vehicle safety, operating globally across multiple countries.
Target Experience:
Our ideal candidate will have a very good understanding of Managing NPI Projects within major technical sectors and have the ability to lead / head up multiple projects and build relationships with colleagues and customers.
Ideally located – Kent, Greenwich, Crawley, Biggin Hill, Hornchurch, Upminster, Romford, Brentwood, Laindon, Dagenham, Surrey Quays, Rochester, Basildon, Ilford, Dartford, Gillingham, Bromley, Greenwich, Croydon, Sevenoaks, Orpington, Epsom
Salary – Circa £45k - £65k DOE plus bonus + Car / Allowance + Pension (up to 5%) + Private Medical +Eye Care Vouchers + Employee Assistance Program + 25 days Hols exc BH (Holiday entitlement increases by 1 day every 2 years) + Hybrid working
Key Skills:
Minimum 2 to 3 years NPI Project Management experience.
Must be able to manage projects from cradle to grave.
Have a technical background – Ideally Electronics, Mechanical, Electro Mechanical, Design.
Must understand the production life cycle.
Lead engineering teams and be able to liaise and support other departments.
Have an understanding and knowledge of working with and supporting OEM and Tier 1 customers.
Be comfortable working in a fast-paced environment.
Have the skill to build internal and external relationships.
Self-motivated and able to work independently.
Be a confident communicator – written and verbal.
BTEC, HNC / City & Guilds or equivalent in engineering or science discipline.
Solid PC user within key Microsoft applications.
The Next Step:
To express an interest in this role, please call Robert Cox of Glen Callum Associates Ltd for an initial confidential chat on 00 44 (0) 7398 204832 or email with your CV detailing how your experience meets with the above.
Job Ref: 4121RCA – Technical Project Manager....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment. Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g. Hot Work, LOTO, Confined Space), Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure, Implement the needed preventative measures, including optimization of PM program, Ensure reliable operation of facility support processes and utilities (i.e. HVAC, Steam Boilers, Air Compressors, Tow motors, Cooling Towers, Hot Oil Heaters), Diagnose/Troubleshoot, repair/replace and maintain facility electrical systems (e.g. programmable logic controllers, human machine interfaces, lighting) and components (e.g. sensors, switches, valves), Diagnose/Troubleshoot, repair/replace and maintain facility mechanical systems (e.g. product vessels/reactors, pumps) and components (e.g. piping, manual valves), Investigate equipment/process failures and difficulties to diagnose faulty operation, Assist Maintenance Supervisor to arrange and coordinate contractor tasks (including equipment rental) to support facility and process maintenance/repairs, Serve, as needed, on process hazard analysis (PHA) teams/sessions
EDUCATION
High school diploma or general education degree (GED) One-year certificate from college or technical school and 1-2 years' experience preferred OR High School Diploma and 4 years' experience
EXPERIENCE
One to two years related experience and/or training One-year certificate from college or technical school and 1-2 years' experience OR High School Diploma and 4 years' experience
OTHER SKILLS AND ABILITIES:
Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense. Problem Sensitivity - The ability to tell when something is wrong or likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes. Mechanical - Knowledge of machines and tools, including their designs, uses, repair and maintenance. Electrical - Knowledge of circuits, programmable logic controllers (PLCs), sensors, switches, including their connectivity to mechanical systems, uses, repair and troubleshooting.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
Technical Project Manager
We want to immediately hire a Project Manager / Technical Project Manager with experience of taking technical projects from conception to production. You will need experience in NPI, OEM and Tier 1 manufacturing and will ideally have an Electro Mechanical, Electronics or Design background.
As Project Manager for this role, you will ideally come from a technical background and have experience of working in an engineering, manufacturing, electronics, electrical, automotive, aerospace, agricultural vehicle / machinery or Off Highway vehicle or medical equipment sector.
Business & Global Reach:
The business is an established market leader within its field, covering OEM, Retro-Fit / Aftermarket sectors, leading innovation for product design and development for lifesaving products to optimise vehicle safety, operating globally across multiple countries.
Target Experience:
Our ideal candidate will have a very good understanding of Managing NPI Projects within major technical sectors and have the ability to lead / head up multiple projects and build relationships with colleagues and customers.
Ideally located – Kent, Greenwich, Crawley, Biggin Hill, Hornchurch, Upminster, Romford, Brentwood, Laindon, Dagenham, Surrey Quays, Rochester, Basildon, Ilford, Dartford, Gillingham, Bromley, Greenwich, Croydon, Sevenoaks, Orpington, Epsom
Salary – Circa £45k - £65k DOE plus bonus + Car / Allowance + Pension (up to 5%) + Private Medical +Eye Care Vouchers + Employee Assistance Program + 25 days Hols exc BH (Holiday entitlement increases by 1 day every 2 years) + Hybrid working
Key Skills:
Minimum 2 to 3 years NPI Project Management experience.
Must be able to manage projects from cradle to grave.
Have a technical background – Ideally Electronics, Mechanical, Electro Mechanical, Design.
Must understand the production life cycle.
Lead engineering teams and be able to liaise and support other departments.
Have an understanding and knowledge of working with and supporting OEM and Tier 1 customers.
Be comfortable working in a fast-paced environment.
Have the skill to build internal and external relationships.
Self-motivated and able to work independently.
Be a confident communicator – written and verbal.
BTEC, HNC / City & Guilds or equivalent in engineering or science discipline.
Solid PC user within key Microsoft applications.
The Next Step:
To express an interest in this role, please call Robert Cox of Glen Callum Associates Ltd for an initial confidential chat on 00 44 (0) 7398 204832 or email with your CV detailing how your experience meets with the above.
Job Ref: 4121RCA – Technical Project Manager....Read more...
Electronic Instrumentation Engineer required to use their industrial engineering skills in PLCs, electrical motor drives, inverters, robots and automation systems to performance test propulsion systems.
The ideal candidate will have experience building, testing and modifying electronic modules including power, control and data acquisition devices. Control room and firing bay knowledge highly desirable but not essential.
Key skills:
Electrical Engineering
Electro-mechanical
Power Systems or Power Electronics
Energy Storage Systems
Electrical Design
Schematics
Matlab
Simulink
AutoCAD
FineELEC (4M)
NEPLAN
Electrical Troubleshooting
Electrical Testing
On-board Diagnostics (OBD-II)
PSpice....Read more...
Aerospace and Defence Mechanical Design Engineer required to join a fast growing team focusing on fluid control systems for use on spacecraft ??? it literally is Rocket Science! The ideal candidate will have a strong interest in the design, development, industrialisation of control systems for space propulsion, (rocket engines, thrusters and Controls).
You will have a 2:1 or above in Design, Aerospace Engineering or similar with some commercial design experience for applications in space.
This is a fantastic opportunity to work on cutting edge and exciting new worldly mechanisms.....Read more...
Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. But we’re always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative but work well within a team.
The role
Fugro are seeking a Maintenance Engineer to be based at our waterfront office at Portchester, Hampshire. The department specialises in offshore geophysical seabed and sub-seabed surveying for the renewables, unexploded ordnance (UXO), nearshore and utilities sectors across north-west Europe. As a Maintenance Engineer you will be responsible for the maintenance and repair of mechanical and electrical equipment and systems within the Geophysical Department. The role will include mobilising and commissioning the systems onto survey vessels and supporting ongoing operations of the equipment. Tasks will include managing LOLER and calibration schedules of equipment, keeping repair logs, troubleshooting, repair and maintaining geophysical equipment on site and in the workshop as well as travelling to vessels to install, maintain and repair equipment. Supporting offshore staff remotely to assist with repairs. Communicating with suppliers and test centres to organise spares, repairs and testing. Managing associated administrative tasks.
Who we’re looking for:
Essential
5+ GCSEs and 2+ A-levels or equivalent level qualification.
Mechanical and/or Electrical skills and knowledge.
Excellent troubleshooting and problem-solving skills along with the ability to fault find, test, repair and interrogate geophysical systems.
Able to work flexible hours and to travel when required.
Previous experience in a similar role.
Good knowledge of English language, verbal and written.
Proficient in use of MS Office applications.
Desirable
Knowledge of electrical and hydraulic winch motors and motor control systems.
Working knowledge of, and ability to work to marine mechanical standards.
Able to design and modify mechanical and hydraulic systems, documents and schematics using CAD.
Be willing to go to sea for short durations.
What we offer:
Fugro provides a positive work environment as well as projects that will satisfy the most curious minds. We also offer great opportunities to stretch and develop yourself. By giving you the freedom to grow faster, we think you’ll be able to do what you do best, better. Which should help us to find fresh ways to get to know the earth better. We encourage you to be yourself at Fugro. So bring your energy and enthusiasm, your keen eye and can-do attitude. But bring your questions and opinions too. Because to be the world’s leading Geo-data specialist, we need the strength in depth that comes from a diverse, driven team.
Extensive career & training opportunities both nationally and internationally.
Competitive salary accompanied by an attractive package including car allowance, contributory pension scheme, life assurance and private medical insurance.
Flexible and hybrid working
25 days annual leave.
Benefits portal
Option to buy or sell up to 5 days annual leave.
Subsidised canteen/restaurant in Wallingford.
Opportunity to lease a discounted electric car.
Free parking.
Our view on diversity, equity, and inclusion
At Fugro, our people are our superpower. Their variety of viewpoints, experiences, knowledge and talents give us collective strength. Distinctive beliefs and diverse backgrounds are therefore welcome, but discrimination, harassment, inappropriate behaviour and unfair treatment are not. Everybody is to be well-supported and treated fairly. And everyone must be valued and have their voice heard. Crucially, we believe that getting this right brings a sense of belonging, of safety and acceptance, that makes us feel more connected to Fugro’s purpose ‘together create a safe and liveable world’ – and to each other
#LI-JM1
Apply for this ad Online!....Read more...
Service Care Solutions is currently seeking a Grave Digger to join our client in Stockport.The ideal candidate will have previous experience in grave digging, encompassing machine excavation, hand excavation, and backfilling excavation. Additionally, familiarity with grounds maintenance is advantageous as the role involves maintaining cemetery grounds alongside grave digging duties.
Key Responsibilities:
Conduct machine excavation using a Bobcat 1.7 series mechanical excavator for the precise digging of graves.
Utilize hand excavation techniques when necessary to ensure accuracy in grave dimensions and alignments.
Perform backfilling excavation with attention to detail to ensure stability and safety.
Maintain the appearance and integrity of cemetery grounds through landscaping, mowing, and general upkeep.
Adhere to strict safety protocols and guidelines, including the installation of excavation shoring and compliance with Health and Safety regulations.
Operate Thwaites dumper (1 tonne) for the transportation of materials as required.
Work efficiently within specified timeframes, sometimes under pressure, while adhering to instructions provided.
Demonstrate physical capability to carry out lifting, handling, and hand excavation tasks effectively.
Qualifications and Skills:
Previous experience in grave digging is highly desirable.
Proficiency in machine excavation, hand excavation, and backfilling excavation techniques.
Grounds maintenance experience is advantageous.
Familiarity with the operation of a Bobcat 1.7 series mechanical excavator and Thwaites dumper (1 tonne).
Ability to work within designated timeframes, sometimes under pressure, and follow instructions accurately.
Understanding of installation procedures for excavation shoring and awareness of all Health and Safety implications.
Possession of a valid driving license is desirable.
If you have any questions, do not hesitate to contact Hona on 01772 208967 or email hona.bzowska@servicecare.org.uk....Read more...
Electrical Estimator Tralee, Ireland€60,000 - €80,000 + Training + Holidays + Career Progression + Pension + Flexible Working + Immediate StartJoin a company at the forefront of electrical and mechanical solutions for the water and waste-water industry as an Electrical Estimator. This role is tailored for someone who wants to progress their career in a supportive environment to become a commercial manager. Work closely with cross-functional teams to coordinate project execution, leveraging your communication and leadership skills to drive collaboration and achieve project milestones.As an Electrical Estimator you will take charge of the commercial aspects of projects, from cost planning to value engineering. Your analytical skills will be put to the test as you assess project feasibility, negotiate contracts, and manage budgets to ensure profitability and client satisfaction. Embark on a rewarding career journey, where you'll have the opportunity to grow and play a pivotal role in shaping the future of the water and waste-water industry.Your Role As An Electrical Estimator Will Include* Managing commercial aspects of assignments * Provide on-site support and client briefings * Preparation and submission of electrical tenders *Establishing and optimising estimating processes and procedures *Ensuring a streamlined and effective bid management process *Commutable to CastleislandAs An Electrical Estimator You Will Have* Industry experience: Water / Waste-water sectors or heavy industry experience within Pharma or Quarries * Possesses an engineering or Quantity Surveyor qualification. Preferred, with a focus on electrical or mechanical disciplines * Trader or Electrical Background * Commercial Acumen If you have any questions on the role please call Dea on 07458163032 Keywords: Electrical estimator, Electrical Estimating, Value Engineering, Castleisland, County Kerry, Ireland, Tralee, Killarney, Listowel, Newcastle West, Currow, Cordal, Abbeyfeale, Knocknagashel, Bailydesmond, Scartaglen, Co. Kerry, Bawnluskaha, Listowel....Read more...
The Maintenance Engineer vacancy is working with a market leading manufacturing firm based in the Bedworth area of Coventry. The position offers excellent opportunities for both training and career development. The client have large CAPEX and investment budgets and new Proejcts planm With a generious production bonus of 10% and OT at 1.5 and 2x, OTE is circa upwards of £60,000+! Location: Bedworth/Coventry What’s in it for you as a Maintenance Engineer?
Hours of Work – 4 on 4 off (Days and Nights)
Salary of upto £48,500 Annual pay increases
10% KPI Bonus
33 days Holiday (Pro Rata)
Company pension of upto 16% (8% Matched)
Working with a market leading Manufacturing firm
Training, Career and Development opportunities Main Duties & Responsibilities of Maintenance Engineer include;
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained – maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Unrivalled training and devleopment for the right candidate
Experience and Qualifications Required for Maintenance Engineer;
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g. NVQ, City and Guilds, ONC, BTEC or above - Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
Maintenance Engineer experience or qualifications of a Maintenance Engineer
The position may suit a Mechanical Maintenance Engineer, Electrical maintenance engineer, maintenance fitter, maintenance electrician, multi-skilled engineer etc, Maintenance Engineer.
....Read more...
Multi Skilled Maintenance Engineer
Bury St Edmunds
£41,000 - £42,000 Basic + Panama Shift + Overtime + Pension + IMMEDIATE START Great opportunity for a multi skilled maintenance engineer to work for a well known food manufacturer that will invest into you constantly. You'll get the chance to develop yourself with training and courses to become a technical specialist and be at the forefront of your industry. This company is one of the biggest food names across the UK and internationally. As a multi skilled maintenance engineer you will further your knowledge through training and continuous development, to become a specialist within a company who recognise and reward your efforts with a great package. Your role as multi skilled maintenance engineer: * Multi Skilled Maintenance Engineer -Panama Shift * Mechanical and Electrical fault finding on manufacturing equipment * PPM's and BreakdownsAs a multi skilled maintenance engineer you'll need:* Maintenance engineer background (Any considered) * Electrical and mechanical fault finding * PLC fault finding (Inputs & Outputs) * Food / FMCG / Manufacturing / or industrial experience * Commutable to Bury St EdmundsPlease apply to Eran at Future Engineering Recruitment or call 07458163044 Keywords: multiskilled engineer, engineer, fmcg, manufacturing, electrical engineer, fault finding, effect analysis, maintenance engineer, preventative maintenance, shift maintenance engineer, Cambridge, Thetford, Ipswich, Bury St Edmunds Future Engineering Recruitment Ltd is that of an Employment Agency. Please visit our website to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.....Read more...
X2 Electrical Engineer - Central London - Temporary - FM Service Provider - Up to £24 per hour Are you an Electrical Maintenance Engineer looking for a new challenge?If the answer is yes, then read on...A Fantastic opportunity to work for a leading FM Service Provider situated in Central London. CBW is currently looking for an Electrical Maintenance Engineer to be based in a commercial building located in Central London. The successful candidate will be electrically biased (NVQ, C&G, 17th / 18th Edition etc) with a proven track record in commercial building maintenance. Working with the maintenance team on-site, He or she will be required to carry out electrical, mechanical, and fabric maintenance to the following.Duties & Responsibilities:Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - ResetWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsVacancy 1 - Electrical Engineer Location: Islington Dates: 1st May - 15th May Day/hours: Monday - Friday / 08:00am - 17:00pm Single Man Site Vacancy 2 - Mobile Electrical Engineer Location: Liverpool Street Monday - Friday & Friday Oxford Circus Dates: 1st May - 14th May Day/hours: Monday - Friday / 08:00am - 17:00pm Single Man SiteRequirementsElectrical qualified (C&G, NVQ etc)A proven track record in Building MaintenanceGood Communication Skills.Multi-Skilled - Mechanical / Electrical.Good Leadership & Management skillsIf you are interested please email your CV to Katie at CBW Staffing Solutions for more information.....Read more...
Monday to Thursday 6.45am – 4.15pm, No weekend working, Permanent position, Health Care plan, Overtime available.
We are looking for a PDI Vehicle Technician for a market leading Automotive business, looking to add the their quality team based in Wariwck.
We would welcome people to apply that may have worked as a Light Vehicle Technician, HGV Fitter or HGV Technician, Car Mechanic or have some exposure working with vehicles in a mechanical capacity.
The PDI Vehicle Technician offers excellent opportunities for both training and career development. The successful candidate will be working with a forward-thinking company that invest in their workforce as well as offering future opportunities for progression.What’s in it for you as a PDI Vehicle Technician:
Hours of work Monday to Thursday 6.45am – 4.30pm
4-day work week
20 days holiday inclusive of bank holidays
Excellent pension scheme and DIS benefit, cycle to work scheme and company sick pay
Health shield medical cash plan
Training and career development opportunities
Main Duties & Responsibilities of the PDI Vehicle Technician role:
To ensure that every vehicle is systematically tested in accordance with the specified procedure
To confirm that every vehicle complies with the customers specification
Ensure that all faults or discrepancies are recorded in a systematic manner
Experience and Qualifications Required for the PDI Vehicle Technician role:
Experience in motor vehicles
Mechanical knowledge
HGV knowledge is advantageous
If you are interested in this role, or want to have a private and confidential chat, please contact Joe Reid at E3 Recruitment.....Read more...
Multi Skilled Maintenance Engineer – Monday to Friday – Commercial Estate – Kings Cross, North London - £44,000 Per annumMy client is looking for a Multi Skilled Maintenance Engineer based on a commercial estate near Kings Cross. The successful candidates will be Electrically or Mechanically biased (C&G / NVQ) with a proven track record in commercial building maintenance. Working with the maintenance team on site. He or she will be required to carry out electrical and mechanical maintenance to the following. In return, the company are offering a competitive salary of £44,000, further training and career progression. Key Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution, pro logic lighting)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsBMS System - Monitor (i.e. Hot & Colds)General building fabricMonitor mechanical plantPumps, Motors, Seals, BearingsHours of workMonday to Friday 08:00 am to 17:00 pm Package£44,000 Basic SalaryUniform and Tools ProvidedCycle-to-work scheme25 days holidayOvertime Available1 in 12 call outAnnual pay reviewRequirementsElectrically or Mechanically qualified level 3 (C&G, NVQ etc)Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skills If you are interested, please get in contact with Alex Denton of CBW Staffing solutions.....Read more...
Technical Sales Engineer Crawley £45,000 - £65,000 + Bonus + Training + Holidays + Technical Progression + Flexible Hybrid Working + Data Centre Industry + Progression + Healthcare + Pension + Travel Allowance + Mileage + Birthday Day Off + Immediate StartJoin one of the world’s leading specialists in critical environments as a Technical Sales Engineer in the data centre industry. Work for a company with commitment to consistent training and development that empowers you to advance your career. Ideal for ambitious individuals seeking progression opportunities, including potential advancement to Head of Solutions.As a Technical Sales Engineer, you'll work closely with a skilled team, gaining invaluable knowledge in a multi-billion-pound industry. Engage with customers to understand their needs and provide tailored technical solutions that align with their requirements. If you're ready to take the next step in your career and make a meaningful impact in the data centre industry, I invite you to embark on a rewarding journey of growth and success. Your Role As A Technical Sales Engineer Will Include* Managing bid processes, including proposal development and stakeholder coordination * Managing key accounts and relationships* Coordinating wider teams and partners to deliver successful projects. * Driving profitable growth by cultivating client relationships and understanding their needs* Heavily biased towards Account Management As A Technical Sales Engineer You Will Have:* Technical solutions and sales acumen * Three years of industry experience, preferably in a mechanical or electrical discipline. * Hands-on experience and technical competence * The ability to develop proposals, conduct estimations, and communicate technical solutions
If you have any questions on the role please call Dea on 07458163032.
Keywords: Technical Sales Engineer, Internal Sales Engineer, Interim Sales Engineer, Technical Sales Manager, Data Centre, Sales Engineer, Technical, Business Development, Account Management, Solutions Engineer, Mechanical, Electrical, Business Manager, Sales Manager, Head of Sales, Gatwick, London, Crawley, Redhill, Surrey Hills, Croydon, East Grinstead ....Read more...
MET / Bodyshop Technician
Location: Sheffield, South Yorkshire
Salary: £28k - £32k + Excellent Benefits
Full-Time / Part-Time, Permanent, Monday - Friday (40 Hours)
The Client:
Our client is a well-established new and used vehicle dealership, offering exceptional delivery service nationwide.
The Role:
As a MET / Bodyshop Technician, you will undertake various duties such as converting and fabricating bespoke vehicles.
Responsibilities:
* Repairing or replacing custom parts as required.
* Crafting components according to specifications.
* Completing all tasks with precision and efficiency.
* Following safety guidelines and ensuring a tidy workspace.
* Working cooperatively with colleagues to organize tasks and adhere to deadlines.
Requirements:
* Previously worked as a MET Technician, Trim Technician, MET Fitter or in a similar role.
* Capable of handling physically demanding tasks, including lifting heavy objects.
* Strong foundation in mechanical and electrical systems with excellent problem-solving abilities.
* Skilled in use of both power and hand tools.
* Exceptional communication, time management and prioritisation skills.
* At least 3 years of experience in bodywork, electrical, and mechanical roles would be preferred.
Benefits:
* Competitive Salary
* Company pension
* Free parking
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: MET Technician, MET Fitter, Bodyshop Technician, diagnostic technician, Trim Technician, electrical
....Read more...
Synergi are recruiting for a Electrical Maintenance Engineer to join a large manufacturing company in Reading. The successful Engineer would join on a continental Days and Nights shift pattern working an average of 42 hours a week. This is a great opportunity for a Electrical Maintenance Engineer world leader in their industry. Company Profile: The company have recently made a huge change with their company Infrastructure and are looking to expand. Along with lots of investments going into their business, they pride themselves in offering their staff with Development & Progression plans. The business key values are promoting health & Safety & Teamwork. Job Description as an electrical maintenance: • Respond promptly to breakdowns and give feedback to production regarding expected downtime and planned corrective action • Follow the company Health & Safety guidelines • Conduct planned preventative maintenance and other equipment servicing as directed by the engineering manager • Working closely with both production and senior management to make improvements and prove improvements with the current process. Roles & Responsibilities as an electrical maintenance engineer: • Conducting Mechanical & Electrical Maintenance on High Speed production Machinery such as Bearings, Pumps, Chains, valves, Single & Three phase wiring, fault finding, working on control panels, invertors, motor drives and some PLC controlled equipment • Providing Mechanical breakdown and planned maintenance • Focus on the key performance indicators (KPIs) identified by the Engineering Manager, and work towards achieving and surpassing agreed targets • Ensure that all necessary documentation is up to date and complete • Foster a constructive relationship with all departments and ensure lines of communication are open and are able to improve the site efficiency Salary: £46,000+ Shifts: Days and nights Benefits: Pension, Holidays, Personal Development & Training, Discounted Staff Products and Many More. What you need to do Next: If you are suitable for this Electrical Maintenance Engineer role, please apply below.....Read more...
My client and established and expanding Fire Protection solutions provider are currently looking to recruit an experienced Field Service / Maintenance Engineer, specialising in Fire Suppression Systems.
Reporting to the Maintenance Manager you will be responsible for attending assigned visits to customer sites and premises nationwide to perform scheduled electrical and mechanical maintenance, fault diagnoses and repair of fire suppression detection systems. Ensuring system serviceability testing and all paperwork in completed and assigned after job completion.
The role will be responsible for covering clients Nationwide (however a large core of these are based in the Midlands and London locations). Candidates will be required to travel extensively (Nationally) and will require the ability to stay away from home as necessary.
Package Details
£40,000 to £45,000
Company Van (fully equipped), Fuel Card, Mobile Phone & Laptop / Tablet
Expenses for Overnight Stays & Daily Meal Allowance
24 Days Annual Leave & Bank Holidays
Pension & Death in Service
Requirements
Previous experience in a similar role working on Fire Detection and Suppression Systems
Experience of Water Mist Fire Suppression and Detection systems, alongside a strong understanding and knowledge of the wider fire prevention sector
Good understanding of both Electrical and Mechanical disciplines
Full UK Driving License
Be educated to NVQ Level 3 and ideally hold 17th Edition Certification
Ability to communicate directly with customers and maintain good relationships
Proficient in the use of mobile technologies (Smart phones, Tablets)
Have passed or able to pass the CSCS Health & Safety Test (Holds a relevant CSCS or related scheme competency card preferable)
Able to work and stay away from home and, if necessary, to do so at short notice when needed.
....Read more...
