Are you a Manufacturing Technician based in Norwich searching for a new, exciting opportunity with a global company?
The key purpose for the Manufacturing Technician job in Norwich is to test and repair a variety of equipment, as well as taking part in complex diagnosis of these products down to component level, and record or escalate any faults as required.
Key skills and requirements for the Manufacturing Technician job based in Norwich are:
- Previous work with precise electronic circuitry and components
- SMT Soldering
- Use of complex test/measurement equipment (Oscilloscopes, ARB’s, DMM’s etc.)
- IPC Experience (training can be required where necessary)
- Knowledge of electrical/electronic components and circuits
This is a fantastic opportunity to join a successful and world leading Technology Company with cutting edge products who can offer dynamic, challenging, and exciting career opportunities.
APPLY NOW! If you are interested in this Manufacturing Technician job in Norwich or to discuss any other Manufacturing Technician jobs, please call Leah Rogers on 01582 878834 or 07961158783 To apply email: LRogers@redlinegroup.Com....Read more...
Technician required for an Aerospace Manufacturing facility with multiple cleanrooms working on precise liquid fuel system delivery and combustion systems. As an Engineering Technician you will work as part of a precision manufacturing team testing valve?s and valve assemblies to very tight tolerances.
Equipment
Digital voltmeters, oscilloscopes, data acquisition.
Particle counting equipment
Gas flow testing of valves
Electrical Testing
High voltage dielectronic and insulation resistance testing
Key skills
Engineering
Electronics
Multi meter
Manufacturing
LabVIEW
Test Equipment
Six Sigma
Oscilloscope
Data Acquisition
Soldering
Aerospace
LabVIEW
Cleanroom....Read more...
Technician required for an Aerospace Manufacturing facility with multiple cleanrooms working on precise liquid fuel system delivery and combustion systems. As an Engineering Technician you will work as part of a precision manufacturing team testing valve???s and valve assemblies to very tight tolerances.
Equipment
Digital voltmeters, oscilloscopes, data acquisition.
Particle counting equipment
Gas flow testing of valves
Electrical Testing
High voltage dielectronic and insulation resistance testing
Key skills
Engineering
Electronics
Multi meter
Manufacturing
LabVIEW
Test Equipment
Six Sigma
Oscilloscope
Data Acquisition
Soldering
Aerospace
LabVIEW
Cleanroom....Read more...
This permanent Maintenance Technician opportunity is with a leading global chemical manufacturer offering double figure bonus, double figure pension and more. The company is consistently expanding and looking to add an individual to their operation based in Bradford working on a 4 on 4 off shift.
This Maintenance Technician position is with a multi-billion-pound chemical company with multiple sites in the UK and throughout Europe. The company is investing into their existing plant, driving innovation in order to maintain their status as a market leader.
Responsibilities of the Maintenance Technician;
Providing engineering support to across manufacturing and process equipment.
Support on planned and unplanned engineering support, involving carrying out in-process adjustments.
Repairing plant infrastructure including mechanical equipment and pneumatics.
Execution of projects from design through to commissioning.
I am interested in speaking to candidates with experience working on related manufacturing sites including Engineer’s, Craftspeople, Skilled Operator’s and Technical Operator’s. The successful Maintenance Technician will ideally hold an Electrical qualification and ideally be apprentice trained.
The ideal candidate for the Maintenance Technician role will be happy with a working approach that allows candidates to be flexible. Aside from the main technical tasks, these individuals get the opportunity to work and learn other areas of the manufacturing site that otherwise they may not get the opportunity to do so.
In addition to salary the Maintenance Technician, subject to going permanent, will receive a benefits package that includes double figure bonus, double figure pension, strong sickness pay policy and income protection.
Please apply to this Maintenance Technician position for further consideration.....Read more...
My client, are currently seeking a Test Technician to join their growing team at their fantastic manufacturing facility in Bedfordshire.
The primary purpose of the Test Technician, Bedfordshire role, will be to ensure that the test engineering function delivers service levels capable of achieving timely delivery and complete customer satisfaction. Other responsibilities will include
Test, repair and debug of manufactured product to customer and/or Internal specification
Design, development or implementation of new test procedures using Flying Probe, JTAG and manual/Automated functional test methods
Support the implementation of practices that ensure the company delivers to customer right first time & every time i.E. Achievement of 100% batch deliveries on time, every time
Support the definition of Test & Inspection strategies creating absolute clarity on test coverage and acceptability criteria of test criteria
Ensuring programming and test development work is completed in line with production output requirements
Ensuring quality principles & standards are applied & adhered to throughout test
Documentation and analysis of quality and performance on test operations.
The ideal candidate for the Test Technician, Bedfordshire, job will have experience in a manufacturing test role, along with:
Thorough understanding of Digital and Analogue electronics, fault finding to component level and associated test methodologies
Thorough understanding of manufacturing environment
Experience of Microsoft products including Excel & Word
Experience of using ERP systems and databases
Demonstrable experience of managing multiple projects
APPLY NOW for the Test Technician role, in Bedfordshire, by sending your CV to tdrew@redlinegroup.Com or call 01582 878848 for more information or to discuss other Manufacturing roles.....Read more...
SITE FACILITIES MAINTENANCE TECHNICIAN – CREWE - £30,000 - £33,000 + EXCELLENT BENEFITSDue to continued success, we are working with a fantastic Crewe based manufacturing company with a global presence. A market leader in their industry, year on year they have experienced continual growth since they were established in 1990. We are looking to recruit an experienced Site Facilities Maintenance Technician to join their team.COMPANY BACKGROUNDOur client is market leading independent manufacturing company with sites throughout the UK and overseas. A company that truly looks after their staff with continual support, impeccable training and the opportunity to continue to grow your skill set along the way.SITE FACILITIES MAINTENANCE TECHNICIAN JOB PURPOSETo ensure all customer requirements are fulfilled. Successfully developing and maintaining fantastic relationships. Offering accurate and timely resolutions to all customer queries, orders and complaints.SITE FACILITIES MAINTENANCE TECHNICIAN DUTIES
Joinery and general DIYMaintaining/installing woodwork such as doors etc.Painting offices and manufacturing areasGeneral plumbing – toilets and kitchen areasGeneral repairs – doors, windows, floors etc.Landscape maintenance and external site maintenanceBasic engineering repairs such as maintenance to Air Conditioning unitsBasic electrical repairs such as replacing light bulbs and tube lightsCarry out repairs to site machinery and equipmentDaily and weekly checks to all compound air equipment
SITE FACILITIES MAINTNENCE TECHNICIAN REQUIREMENTS
5 years building/facility maintenanceExperienced in all trades including plumbing, joinery, painting and decoratingBasic understanding of engineering maintenancePC LiterateExperienced working within a fast moving manufacturing environmentTeam PlayerTake pride in their work and always gets the job done right the first time!Confident communicatorOrganisedProactive
SITE FACILITIES MAINTENANCE TECHNICIAN PACKAGE
Working Monday to Friday 8am-4pm£30,000 - £33,000KPI bonus based on annual targetChristmas shutdownOn-site parking31 days holiday (inclusive of Bank Holidays)Opportunity to progress
Follow us on twitter #awconsultingltdIn respect to the above role(s), Anderson Wright Consulting Ltd operates as an Employment AgencySITE FACILITIES MAINTENANCE TECHNICIAN – CREWE - £30,000 - £33,000 + EXCELLENT BENEFITS....Read more...
Are you an experienced Mechanical Technician looking for an exciting new opportunity?
We are currently looking for a Mechanical Technician to join a growing engineering company based in the Essex area.
As the Mechanical Technician you will be assisting in the machining, manufacturing and build-up of enclosures, equipment and machinery on the factory floor.
KEY DUTIES AND RESPONSIBILITIES:
Your duties as the Mechanical Technician will be varied however the key duties and responsibilities are as follows:
1. You will be responsible for the fitting and assembly work on the factory floor as well as conducting trials and tests on large scale machinery.
2. As the mechanical technician, you will also be responsible for piping, testing and fault-finding pneumatic logic circuits.
3. Additionally, you may be required to travel to customers' sites to assemble, commission, support and service machinery.
ROLE REQUIREMENTS:
To be successful in your application to this exciting opportunity as the Mechanical Technician we are looking to identify the following on your profile and past history:
1. You will need to have good basis engineering skills, practical engineer experience and be able to interpret equipment assembly drawings for this role.
2. Ideally some exposure to pneumatics & installation/commissioning work at customer sites.
Key Words: Mechanical Technician | Engineering | Manufacturing | Pneumatics | Equipment Assembly Technician
Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer who are certified by Investors in People for talent development. We therefore welcome applications for any interested parties who fulfil the role requirements for this position. HRS is a company exclusively supporting the science and technology sectors, and is made up of a collaboration of recruitment professionals and scientists. We look forward to helping you with your next career moves.....Read more...
Are you an experienced Electrical Technician looking for an exciting new job opportunity?
We are currently looking for a Electrical Technician to join a growing engineering company based in the Essex area.
As the Electrical Technician you will be responsible for working alongside existing Installation Electricians to install the electrical controls for bespoke manufacturing machines with possible site installations too.
KEY DUTIES AND RESPONSIBILITIES:
Your duties as the Electrical Technician will be varied however the key duties and responsibilities are as follows:
You will install electrical controls for the company's bespoke filling machines in the factory workshop and when required assist with other tasks within the automation department, such as physical wiring inspections, installation checks and machine testing.
As the electrical technician, you will also be responsible for the factory maintenance.
ROLE REQUIREMENTS:
To be successful in your application to this exciting opportunity as the Electrical Technician we are looking to identify the following on your profile and past history:
1. Formal Electrical Engineering qualification (e.g. apprenticeship) and familiarity with control and machine components is essential for this position.
2. Understand electrical wiring diagrams for component identification, cable terminations and differentiation from a panel device to a field mounted device, contactors, relays, and motors.
3. Familiar with industrial electrical installations and able to work with several types of cable management, tray, basket, trunking, conduit, and the skills to prepare and install cable management system.
Key Words: Electrical Engineering Technician | Industrial Engineer | Automation | Manufacturing
Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer who are certified by Investors in People for talent development. We therefore welcome applications for any interested parties who fulfil the role requirements for this position. HRS is a company exclusively supporting the science and technology sectors, and is made up of a collaboration of recruitment professionals and scientists. We look forward to helping you with your next career moves.....Read more...
A CAD Design & Project Technician is required in an established Steel company based in Essex.
Job Details:
The company is looking for an experienced technician that can work with the team to create preliminary concept designs and take them through to final manufacturing detail and construction drawings.
The ideal candidate would be expected visit local sites to complete surveys with engineers, as such some site experience would be needed.
Previous experience in the structural steel manufacturing industry is a must.
Experience in the marine and port industry would also be a benefit, as would knowledge of ISO Quality Management Systems.
Key Responsibilities:
CAD 2D & 3D detailing of construction, marine and industrial drawings.
Concept drawing for tenders and presentations.
Material take offs and preparing material lists for pricing.
Specification and ordering of materials.
Creating workshop manufacturing drawings.
Creating profile drawings for CNC cutting.
Working with workshop supervisors to identify issues and resolve problems.
Working with operations manager to program and prioritise the manufacturing schedule.
Liasing with clients to resolve production queries.
Control of manufacturing documents and records in accordance with our EN1090 & ISO9001 management systems.
Preparation for ISO 9001, ISO 45001, EN1090 & SSIP audits.
Package:
Up to £50k salary depending on experience.
Car package.
Please apply with your most up to date CV and you will be contacted.....Read more...
Quality Technician – Medical
Location: Welwyn Garden City (You will need to be able to relocate to Oxford in 2025)
Company: Join a dynamic team at a leading medical device company currently based in Welwyn Garden City. In February 2025 the company is moving into a brand-new flagship site based in Oxford.
This is an amazing opportunity to work for a company that change peoples lives for the better!
They are looking for someone who can come in and collaborate with cross-functional teams to ensure the quality assurance and compliance of products, materials, processes and documentation relating to medical device manufacture, goods in inspection, in process inspection and final product testing.
Key Responsibilities for this Quality Technician – Medical job are:
All aspects of manufacturing quality compliance (e.G. Goods in inspection, in process QC checks, final functional testing and analysing the results)
Reviewing batch records, ensuring error-free manufacturing and batch release
Creating/enhancing tooling descriptions, perform calibrations and ensuring calibration & maintenance log is updated and non-conforming tools removed from the manufacturing environment
Maintaining manufacturing KPIs, assessing the production process and creating quality checkpoints
Maintain quality system documentation including supplier records, purchase and manufacturing batch information
Support investigation, analysis and closure of relevant NCRs
Qualifications and Skills required for this Welwyn based Quality Technician - Medical job are:
A background in electronics and/or electro-mechanical assemblies is essential for this role, and experience with Quality management systems such as ISO13485, AS9100 or ISO9001
Electro-mechanical apprenticeship or similar higher education award in this or an associated area e.G., HNC, HND or Level 3 NVQ in a relevant area or higher desirable
Experience of electro-mechanical assemblies in medical device, aerospace, or defence sectors required
Experience in visual inspection and excellent eye for detail
Familiar with test/inspection equipment such as oscilloscopes, multimeters and digital callipers
Experience in Quality Control function such as inspection and measurement
Experience in highly regulated environment (healthcare, aerospace, defence)
How to Apply:
If you're ready to join our clients dynamic team and contribute to the advancement of medical technology, please submit your resume and cover letter to ndrain@redlinegroup.Com or call Nick on 01582878828 / 07961158760!....Read more...
We are seeking a skilled Electrical Technician to work on a permanent basis in Runcorn. The role primarily involves working on electrochemical plant projects, encompassing manufacturing, refurbishment, and servicing.
Salary is c£28-35,000 per annum plus holidays, pension etc.
The role is working Monday to Friday days.
Key Responsibilities:
Execute electrical tasks related to the manufacturing, refurbishment, and servicing of electrochemical plants.
Collaborate with multidisciplinary teams to ensure project success.
Adhere to safety protocols and regulations at all times.
Troubleshoot and resolve electrical issues efficiently.
Conduct regular inspections and maintenance activities.
Requirements:
HNC or equivalent qualification in Engineering.
Electrical ticket/certification.
Demonstrable experience in electrical maintenance and troubleshooting.
Ability to work independently and within a team.
Excellent communication and problem-solving skills.
Desired Skills:
Background in water, chemical, or oil & gas industries, with experience in pumps, controls, and tanks.
Lean manufacturing training or experience.
Versatility in handling multiple roles within a project.
Wishlist Skills:
Familiarity with electrochemical process equipment.
If the Electrical Technician role could be of interest, please call Rebecca at GPW Recruitment or press APPLY NOW!....Read more...
Our client a leading Chemicals Manufacturing Business are currently looking to recruit an Apprentice Trained Electrical Maintenance Technician to join their Electrical Engineering Team. This is a days-based position working 40 hours a week Monday to Friday.
Key Responsibilities for the position will include:
Electrical preventative and reactive maintenance work in an industrial manufacturing environment
Electrical plant installation and modification
Statutory inspections
The use of Computerised Maintenance Management Systems
Use and interpret equipment drawings, manuals and other technical information to assist with all works
Work in accordance with the company safe systems of work and permit to work systems
Electrical Maintenance Technician – Requirements
Educated to a minimum City & Guilds level 3 or similar in a practical Electrical discipline
Ideally hold a recognised Electrical Apprenticeship
18th Edition Electrical Wiring Regulation would be beneficial
CompEx qualification would be extremely beneficial (Ex01-04) & (Ex05-06)
Previous experience of working within a COMAH registered facility would be highly desirable
Strong understanding of ATEX requirements would be beneficial
This is an excellent opportunity to join an established manufacturing business with the opportunity for career development via both internal and external training.
PLEASE NOTE: Unfortunately, we are only able to accept applications for this role from candidates currently residing in the UK.....Read more...
We require a number of Electrically biased, Multi Skilled Maintenance Engineers to join a leading product manufacturer in the Wellingborough area.
DOUBLE DAY shift OR PERMANENT NIGHT shift opportunities. The Role:-
Engineering support to the manufacturing team. Electrically qualified Technicians to support a mechanically strong team.
Completing day to day activities of all plant equipment and other technical activities.
To provide Electrical and Mechanical support to production ensuring optimum performance of all automation machinery. (i.e. packaging, presses, conveyors, palletisers, fillers).
You will repair contacts, sensors, switches, relays, motors, gear boxes, chains, belts and much more.
Providing a fast and efficient response time to any breakdowns that occur.
The Candidate:-
The successful candidate will have completed an engineering apprenticeship/ HNC/HND/ONC/ NVQ or equivalent in electrical Engineering (but a good competency is required in both).
You will have preferably gained your experience from a manufacturing environment.
Possess a solid background in Electrical, Hydraulics & Pneumatics.
You must be able to communicate effectively have excellent attention to detail and be competent with I.T (CMMS systems)
Shifts:-
Option 1 - Double Days: Salary: £48, 300 (6a.m 2p.m / 2p.m – 10p.m)
With one Saturday in 4 rostered on (usually on one of the 6-2 weeks)
Option 2 – Perm Nights: Salary: £50,300 (10 p.m - 6a.m)
Benefits:- 25 days + Bank Hols 6% Contributory Pension Cycle to work Scheme Child Care Vouchers This role will suit a Maintenance Engineer, Maintenance Technician, Shift Engineer, Shift Technician , Multi skilled Engineer , Multi Skilled Technician , Resident Engineer or Resident Technician....Read more...
Manufacturing Engineer
I'm on the lookout for a Manufacturing Engineer to join a highly reputable and long established company within the Yeovil area. The role of the Manufacturing Engineer is to implement new and improve existing production lines and processes in order to maximise efficiency's. You will be tasked to design, setup and develop these processes utilising lean principles to optimise productivity.
The client is owned by a globally recognised powerhouse, collectively they employ over 100,000 globally. As the Manufacturing Engineer there will be plenty of opportunities to learn and grow within the business too.
Manufacturing Engineer Role:
- To assist the Technician team in determining the correct TPM activities and schedules.
- To design, setup and develop production lines / processes utilising lean principles to optimise cell productivity.
- Review existing production Cells and implement changes to improve labour utilisation.
- Provide solutions / improvements to address HSE issues
- Provide support to the manufacturing Cells and drive continuous improvement through RCA.
- Provide technical / Process support to Engineering Technicians in support of RCA.
- To ensure that all new or modified processes, equipment and materials are introduced and used in accordance with UK Health and Safety regulations and Company Procedures.
- Ensuring timely completion of Kaizen ideas
- Be a key driver in our safety first culture
The successful Manufacturing Engineer:
- Ideally Degree Educated and/or Time served apprenticeship in Mechanical or Production Engineering.
- Minimum of 3 years experience in Manufacturing Engineering related support or suitable discipline.
- Proven Experience in managing projects is essential.
- Six Sigma Green Belt qualification (or practical application) is desirable.
- Hands on practical Engineering skills
- Demonstrable RCA problem solving skills.
How to apply for the Manufacturing Engineer Role:
Please apply for the vacancy. If you are interested in finding out more get in touch with Liam Nother on the below information:
Liam.Nother @holtengineering.co.uk....Read more...
An Electrical Repair Technician is required on a permanent basis, working Monday – Friday days for our manufacturing client based in Lewes, East Sussex. This opportunity will offer a salary of between £25,000 - £29,000 per annum in addition to benefits such as company and performance bonus, 32 days holiday (including bank holidays), private healthcare and many more.
You will be working for a market-leading, multi-million pound, global manufacturer that has been operating for nearly four decades and is continuously expanding and growing. This position will provide you with further training, career development and the chance to work within a fast-paced and dynamic department.
Roles and Responsibilities as an Electrical Repair Technician:
Diagnose, repair and test electronic assemblies to component level.
Hand soldering and rework of faults.
Reading and interpreting circuit diagrams and assembly drawings.
Working to time-critical requirements to a high quality and standard.
I would be interested to see CVs from candidates who have:
A Level 3 qualification in Electronics or Electrical Engineering as this is essential.
A minimum of 3 years’ experience in electronic repair, test or engineering within a manufacturing environment as this is essential.
Have an IPC certification as this would be desirable.
Benefits provided to you as an Electrical Repair Technician:
Company and performance bonus.
Private healthcare
Company pension
24 days holiday + bank holidays = 32 days annual leave
2 expensed company events per year
Free onsite parking
If you would like to find out more, please click apply or contact Megan Hepworth at E3 Recruitment on 01484 645269 or via email at....Read more...
Dimensional Calibration Engineer / Mechanical Calibration Technician required immediately for a permanent position in the Stockport / South Manchester area. Competitive salary (DoE) + excellent benefits see below. Working circa 39 hours (Mon – Fri days) - possible flexi-time, the Mechanical Calibration Engineer will predominately be calibrating dimensional, torque and force tools to traceable and UKAS standards
The client will also consider candidates who have part / completed a mechanical apprenticeship or candidates from a mechanical inspection, quality, machining, toolmaking background who have experience of using and or calibrated standard dimensional measuring equipment
Salary & Benefits:
Competitive salary (DoE)
39 hours/week (8 hrs Mon – Thur & 7hrs Fri) – Possible flexible working pattern
25 days holiday plus bank hols.
Company Pension
Life Assurance
Company sick pay (following a qualifying period)
Company "perks" benefits
Medicash Health plan
Occasional O/T
Primary Purpose of Job: Joining the team as a Dimensional Calibration Engineer, you will undertake calibration of measuring equipment to both ISO9001 and ISO 17025 requirements in accordance with Company Procedures, UKAS publications, and other internationally recognised specifications. Maintain relevant records of work, data and results in a traceable and auditable manner utilising calibration management software programs.
The successful Dimensional Calibration Engineer / Mechanical Calibration Tech day to day duties include:
Calibrate dimensional, force, mechanical and torque measuring instrumentation to company procedures, specific parameters and in line with industry standards
Documenting and inputting data / results onto computer and producing quality written documents.
To follow company H&S guidelines.
To be suitable for this Dimensional Calibration Technician role you must have the following experience / characteristics:
Ideally will have completed a relevant mechanical or quality engineering apprenticeship.
Must have previous experience of using and calibrating SOME of the following equipment: vernier callipers, micrometers, DTI’s (dial test indicators), various gauges (pin, plug, ring, screw and height), engineer squares, pressure / force gauges or torque equipment to in-house standards.
Must be able to interpret Engineering drawings with a good understanding of Geometric Tolerances.
Able to work to metric and imperial measurements.
Must be PC Literate (MS Word & MS Excel), Outlook / Email
Must have good interpersonal communication skills and be able to work with the minimum of supervision
The ideal Dimensional Calibration Engineer / Mechanical Calibration Technician will have:
Completed a relevant mechanical or quality engineering apprenticeship.
Previous experience as a Mechanical / Dimensional Calibration Engineer, Mechanical Inspector, QA / Calibration Technician, Toolmaker, Machinist, Bench / Mechanical Fitter etc.
Experience of calibrating a wide range of Dimensional / Mechanical / Physical / Torque or hand-held measuring equipment
Calibrating mechanical measuring instrumentation to National / UKAS standards.
Relevant qualifications in engineering discipline ideally equivalent to HNC or higher.
Knowledge of ISO 17025 and measurement uncertainties.
Previous experience of working in the calibration, aerospace, automotive, engineering or manufacturing sectors.
Key words: Calibration Engineer, Dimensional, Mechanical, Physical, Torque, Mass, Pressure, Test and Measurement, Metrology, Quality Systems, ISO 9001, ISO 17025, UKAS, NPL, Technician, Engineer, Toolmaker, Standards Room, Inspection, Machinist, Fitter, Semi-Skilled, Trainee, Junior, PC Literate, Manufacturing, Aerospace, Automotive, HSS, Ex HM Forces, Manchester, Stockport, Oldham, Bury, Ashton-under-Lyne, Trafford, Altrincham, Greater Manchester
The successful Dimensional Calibration Engineer / Mechanical Calibration Technician will need to be flexible as there may be overtime and other duties not mentioned in this job description. With experience of working in a manufacturing environment, you will have a standard-level education, have the relevant qualifications or experience, be punctual, conscientious, keen and have a practical approach to work.
If you are interested in Mechanical Calibration Engineer role and have the required experience please click on the apply now button.
....Read more...
Are you a Production Test Technician looking for your next opportunity in the Hatfield, Hertfordshire area?
We have a fantastic opportunity available for a Production Test Technician to join our Client's team based in Hatfield, Hertfordshire, who are a world leading design and manufacturing organisation.
As the Production Test Technician in Hatfield, Hertfordshire, you will support the maintenance and development of test equipment to meet the needs of new and existing products in Production, which can include equipment, software, documentation, and ongoing support, to ensure continued test capability to meet production needs.
Other responsibilities will include:
Supporting a proactive approach to ensuring production test capability, including equipment maintenance
Complete minor repairs or routine maintenance, such as replacing probes/connectors/cables
Prepare and maintain test reference (gold) units
Complete routine installation updates of test software and operating systems (support IT)
Commission both new and current test equipment prior to production release equipment
Development
Develop and commission test software
Replication of existing test equipment for redundancy (risk mitigation) or due to increased production
APPLY NOW for the Production Test Technician job, in Hatfield, Hertfordshire, by sending your CV and cover letter to CGilbert@RedlineGroup.Com or call Charlie on 01582 878 807 / 07961 158 782....Read more...
This Multiskilled Maintenance Engineer vacancy is working with a PLC listed and market-leading manufacturing group at a world class facility. This Brand-New state of the art factory is based near Aldridge, and offers fantastic industry leading company benefits such as pension match of up to 10%, premium overtime available, plus extensive accredited OEM training and personal development opportunities, with a development route through to further career opportunities.
The business truly values its employees which is reflected in the generous package and site facilities. This is an exciting time to join the business with their multi-million Capex investment at this site, which will bring industry-leading production and operational facilities.
What’s in it for you as Multiskilled Maintenance Engineer:
Salary circa £51K+, plus bonus, plus premium overtime, OTE £60K+
In addition, you have a matched pension of up to 10%, share options, overtime at a premium, as well as an extensive benefits program such as a cycle to work scheme, shopping discounts etc
Hours of work – Days and Nights, 6am to 6pm, 6pm to 6am, 4 on, 4 off shift pattern
OEM Training and career development, including health and safety training, management training (ILM) & IOSH, cross-skilling and upskilling
Job security and personal development within a market-leading, international manufacturing organisation
The ability to work within a skilled team of engineers permanently
Experience and Qualifications Required for Multiskilled Maintenance Engineer:
Engineering qualified; City & Guilds, ONC, BTEC Level 3, NVQ Level 3, Apprenticeship or equivalent in Electrical or Mechanical Maintenance
Strong Health and Safety awareness
Previous experience as a Maintenance Engineer, Maintenance Technician, Engineering Technician, Engineer etc
Previous experience of undertaking reactive maintenance and following PPM schedules within a manufacturing environment
The company is a market leader, and international manufacturer, with an impressive background of investing in and developing employees at all levels of their business, providing extensive training and career progression opportunities.
If of interest, please apply now!....Read more...
JOB DESCRIPTION
Position: Process Technician
Supervisor: Production Supervisor
Specific Requirements:
Works directly with Production Supervisors, other Process Technician, Utility, and others in the safe handling of the equipment and chemical intermediates in both storage and use in production. Have good command and general working knowledge of manufacturing equipment. Comprehension of manufacturing techniques and demonstrates safety compliances Executes tasks and project responsibilities as outlined and assigned from the compliance calendar, production worklist, expected delivery report, and verbal / written instructions from Supervisors and Management. Inventory Control through cycle counts, batch log & MUS record keeping, and filling or transferring documentation. Assists in management and development of processes and safety programs Manages inventory reduction per departmental inventory reduction strategy Participates in all environmental and safety training as required by Federal, State, County, and Local regulations as well as company policies and demonstrates compliance through work practice.
The above description identifies only the primary duties pertaining to this position. Additional tasks are performed, as required, and do not significantly alter this description.
Background Requirements:
HS Diploma Minimum of 2 years related experience. Ability to lift/move up to 50 lbs daily and occasionally life/move up to 75 lbs.
Benefits: 401k w/ company match after 6 months, Pension Plan, Medical/Dental/Vision Insurance, flexible schedule, life insurance, tuition reimbursement.Apply for this ad Online!....Read more...
JOB DESCRIPTION
Responsible for producing (making, cutting, labeling) high-quality floor, wall, lining and specialty samples for use as field sales tools. Specifically, the technician mixes liquid amines and resins with silica sand in buckets or a blender and then trowels the material onto a sample board to a precise thickness. Once the sample cures or solidifies, a coating material is applied. Once the sample passes the final curing process, the technician will cut the sample with a wet saw, sand it on a belt sander and then lay out for final drying process. Once dry, the technician will label the sample and package for shipment. Arranges for the prompt and efficient distribution of samples. Responsible for policing and cleaning work area, lab, storage room and saw room.The above description identifies only the primary duties pertaining to this position. Additional tasks are performed, as required, and do not significantly alter this description.
Background Requirements:
High school diploma with college level chemistry. Prior experience in a chemical manufacturing environment. Prior supervisory experience. Apply for this ad Online!....Read more...
Available now we have a number of Multi Skilled Engineer vacancies with a prestigious manufacturing company based in Deeside. The shift available is 4 on 4 off days and nights, paying a salary ranging from £47,000 - £49,500 per annum alongside a competitive benefits package including 30 days annual leave, overtime at 1.5 x , life insurance of up to 4 x basic salary and much more.
This century-old business is one of the major UK retailers and is renowned and well-loved for it’s consistent high-quality food produce. Training and progression opportunities are a high priority for this company and you will be given a clear progression plan and the chance to upskill yourself in areas you desire. You will be based at their state-of-the-art site in Deeside in a fast-paced and dynamic department where no two days will be the same.
Roles and Responsibilities as a Multi Skilled Engineer:
You will be responsible for dealing with both reactive and preventative maintenance across the whole site.
You will be involved with a variety of projects such as PPM, Continuous Improvement and New Machinery Installations.
Diagnose and resolve electrical and mechanical faults, machine emergencies or unplanned problems in a systematic and logical manner.
Develop and update Standard Operating Procedures for each machine.
I would love to see CVs from individuals who have:
One of the following qualifications: Level 3 in City and Guilds, NVQ or BTEC (Apprenticeship) in Electrical or Mechanical Engineering.
Knowledge in dealing with breakdowns on Manufacturing / Production Machinery such as slicers, conveyors, mixers, packaging machinery, ovens, check weighers to name a few.
Industry experience within one of the following areas: Food, Drink, Packaging, Print, Textiles, Plastics, Pharmaceuticals or any other fast-paced environment.
Worked previously as a Maintenance Engineer, Electrical Engineer, Multi Skilled Engineer, Mechanical Maintenance Technician, Shift Technician, Maintenance Technician, or Multi-Skilled Technician.
Benefits included as a Multi Skilled Engineer:
22 days holiday + 8 bank holidays
Retail discount cards
Overtime paid at 1.5 x
3% / 5% pension - can increase to 5% and 5%
Life Assurance - 1 x basic salary if not in pension / 4 x basic salary if in pension
Healthcare/Well-being access
Enhanced Family/maternity/parental leave
Subsidised staff canteen
Free parking
If you would like to find out more, please click apply or contact Megan Hepworth at E3 Recruitment on 0148 645269.....Read more...
Time served / Apprentice trained Maintenance Electrician / Electrical Craftsperson is required for permanent position for a Manufacturing company in the Bury / Whitefield M45 area. Rate of pay is approx.. £48k pa incl. shift allowance (likely earnings to be circa £50k - £60k pa including regular O/T) plus benefits (see below). The successful candidate will be working a 4 week rotating, continental shift pattern, average of 42 hours/week (12 hour days & 12 hour nights, with 7 consecutive days off in a 4 week rotation).
The ideal candidate will have prior experience of working in an industrial manufacturing environment and be familiar with three phase / 440v, single phase and DC control systems (incl. motor and heating), industrial electrical installations and industrial manufacturing machinery.
Package:
£48k pa incl. shift allowance (weekly paid).
Regular overtime readily available, likely earnings to be £55-65k pa
33 days holiday allowance (6 hrs / half days can be taken)
Pension
Life assurance
Working Hours:
Continental shift pattern across 4 weeks - 12 hours shifts (Days 6am – 6pm & Nights 6pm - 6am)
4 week shift rotation example:
Week1: 1D, 3N, 3 OFF
Week2: 1 OFF, 3D, 3 OFF
Week3: 4 off, 3N
Week4: 4 off, 3D
Week5: 1D, 3N, 3 OFF
And so on.
The successful Maintenance Electrician / Electrical Maintenance Technician / Industrial Electrical Craftsperson day to day duties will include:
Diagnose and repair electrical problems on industrial and occasional domestic electrical systems – Including 3 phase motor control, DC motor control and Siemens control systems
Assess the parts needed for a job
Conduct routine preventative maintenance and testing
Rewire faulty electrical systems
Ensure good quality workmanship which upholds company standards and complies with industrial codes and follows safety requirements
Ability to work alone and also work within a team
Install electrical systems to 17th / 18th edition regs.
The ideal Maintenance Electrician / Industrial Electrical Craftsperson will have the following experience, skills and characteristics:
Completed relevant maintenance engineering apprenticeship i.e. NVQ L3 / C&G L3
Recent experience as an Electrical Maintenance Engineer in a manufacturing environment.
Relevant electrical engineering qualification and knowledge of current electrical wiring regulations 17/18th
Good working knowledge Three phase, single phase and DC control systems – including motor and heating
Able to follow relay ladder logic wiring diagrams
Industrial Electrical installation experience.
Basic understanding of mechanical, pneumatics, hydraulics repairs
Able to work under pressure, work safely, excellent problem solving skills, attentive and a logical thought process.
Ability to read electrical drawings
Good communicational skills (Oral, Reading & Writing), able to communicate at all levels.
HNC or higher Electrical Engineering qualification (desirable)
Testing and Inspection with PAT – (desirable)
Basic knowledge of a PLC’s / Siemens control system – recognition of Inputs and Outputs (desirable)
Basic knowledge of variable speed drives AC/DC (desirable)
This position could be right for you if you want to work as any of the following: Industrial Electrician, Electrical Craftsperson, Electrical Maintenance Engineer, Maintenance Electrician, Multi-Skilled Maintenance Engineer / Technician, Shift Engineer, Electrical Field Service Engineer, Maintenance Technician, Multi-Skilled Engineering Technician.
Key Words: Maintenance Electrician, Electrical Craftsperson, Electrical Maintenance Engineer, Industrial Electrician, Multi-Skilled Maintenance Engineer, Timeserved, Apprenticeship, 3 phase, single phase, PLC’s, Siemens, Control Systems, Motors, Drives, 17th / 18th Edition, Fault Finding, Industrial Engineering, Heavy Engineering, Lean, Manufacturing, Production, Pneumatics, Hydraulics, Mechanical, Permanent, Conti Shifts, Nights, Bury, Bolton, Rochdale, Oldham, Stockport, Manchester, Lancashire,
The successful Electrical Maintenance Engineer / Maintenance Electrician will need to be flexible as there will be a requirement work additional hours as and when the business requires and other duties not mentioned in this job description. You will also have the relevant qualifications and experience, be self-motivated / pro-active, able to work under pressure, well organised, analytical, logical, able to communicate at all levels, work alone and also as part of a team.
If you are interested in Maintenance Electrician / Industrial Electrical Craftsperson role and meet majority of the above criteria please click on the apply now button....Read more...
Are you an experienced Electrical Control Panel Technician looking for an exciting new job opportunity?
We are currently looking for a Electrical Control Panel Technician to join a growing engineering company based in the Essex area.
As the Electrical Control Panel Technician you will work alongside the Automation Technicians to produce the electrical wiring diagrams for the electrical control systems.
KEY DUTIES AND RESPONSIBILITIES:
Your duties as the Electrical Control Panel Technician will be varied however the key duties and responsibilities are as follows:
1. You will work as part of the Automation department in building, wiring and installing control panels and check required panel components against issued wiring diagram and control panel layouts.
2. Layout chassis plates in line with panel layouts and work with Electrical Design Draughtsman to accomplish best panel layout and design as well as assemble components on to chassis plate and fix accordingly.
3. Mark up wiring diagrams as panel wiring completed and raising any errors detected with the Electrical Design Draughtsman and Automation Technician.
4. Additionally, you will work with the Automation Installation electricians in installing the control panels into the production machines.
ROLE REQUIREMENTS:
To be successful in your application to this exciting opportunity as the Electrical Control Panel Technician we are looking to identify the following on your profile and past history:
1. Relevant degree or formal Electrical Engineering Qualification (e.g. apprenticeship) is essential.
2. Proven industry experience in a similar role, working with automated production machinery or other similar capital equipment.
3. Experience working in a project environment in cross-functional project teams is desirable.
Key Words: Electrical Control Panel Technician | Automation | Manufacturing | Production | Engineering | Controls | Pharmaceutical
Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer who are certified by Investors in People for talent development. We therefore welcome applications for any interested parties who fulfil the role requirements for this position. HRS is a company exclusively supporting the science and technology sectors, and is made up of a collaboration of recruitment professionals and scientists. We look forward to helping you with your next career moves.....Read more...
The Redline Group have an exciting new opportunity for a Production Test Technician – Electronics, based in Huntingdon. This is an excellent opportunity to work with an electronics manufacturing company, of high-end products, responsible for the testing of both digital and analogue components.
Main responsibilities for the Production Test Technician – Electronics, based in Huntingdon:
- Perform Test on products while following detailed test procedures
- Functional test and set-up of printed circuit boards
- Identification and repair of non-conforming products, including fault finding down to component level and associated record keeping
- Micro-controller code loading
- Assist the Production test and Verification Engineer with production testing and feedback during NPI
Key skills and experience required for the Production Test Technician – Electronics, based in Huntingdon:
- Qualified to BTEC/ONC/HNC level in electronics engineering
- Practical experience and a working knowledge of analogue and digital circuit boards
- Must be able to read circuit diagrams and follow detailed Test procedures
- Must be able to fault find to component level on mixed technology printed circuit boards.
- Must have a good eye for detail and be able to work on own initiative
This is a fantastic opportunity for a Production Test Technician – Electronics, based in Huntingdon to develop their skills within an industry leading company. To apply for this role please email a copy of your CV to Sophie Khuttan – SKhuttan@redlinegroup.Com quoting reference SKK1098, or for more information, please call Sophie on 01582 878817 / 07961158586. ....Read more...
Electronic PCB Production Technician required to work on the assembly, testing and calibration of small batches of electronic devices used on cars and autonomous electric vehicles. This will include fault diagnosis and hardware repair.
You will have recent experience of electronics manufacturing or PCB, instrumentation or similar product servicing.
Key skills
Electronics and circuit design knowledge.
Soldering, surface mount and through hole.
Fault find to component level.
Test and measurement equipment.
Ideally qualified to ONC/HNC level preferably in Electronics
Full driving license is essential for this role!....Read more...
