Mechanical Design Engineer with subsea connector experience required to design and develop solutions with CAD and FEA tools high pressure underwater applications.
Requirements
Subsea or offshore mechanical system design experience.
CAD software and FEA tool fluency.
Subsea production systems, umbilical???s, jumpers, electrical and fibre connector knowledge.
Pressure testing, connector design.
Understanding of sealing technologies, pressure-rated designs, and mechanical-electrical interface design.
BEng or MEng in mechanical engineering or related degree subject.
Responsibilities
Design and develop Low and High Voltage subsea electrical and optical connectors, pressure housings, and sealing systems.
Perform FEA mechanical, thermal, and pressure simulations for HPHT high pressure and temperature for deep sea environments.
Prototype testing, pressure testing, and standard qualification.
Detailed documentation Design Specifications, Qualification Test procedures, 3D models, 2D drawings, BOMs, and Test Reports.
Design reviews and PEER reviews.
RCAs, FMEA, dFMEA, pFEMA at development and design cycles.
Cross-functional Collaboration.
Technical 2D drawings....Read more...
We are recruiting a Mechanical Design Engineer to design and develop high-reliability subsea electrical and optical connectors for harsh and extreme environments. You will work on low and high voltage connector systems, pressure housings, and sealing solutions used in offshore and subsea applications.
The role involves CAD-based design, material selection for HPHT and subsea environments, FEA validation, prototype and pressure testing, and producing detailed engineering documentation. You???ll collaborate closely with R&D, manufacturing, quality, and project teams, contributing to both standard product development and customer-specific projects.
Key requirements
Degree in Mechanical Engineering (or similar)
Three years experience in subsea or high-reliability mechanical systems
Strong CAD and FEA skills
Knowledge of sealing technologies, pressure-rated designs, and subsea materials
Familiarity with industry standards (API, ISO, IEC, IEEE)
....Read more...
We are currently looking for an experienced Machinist Technician with CNC experience to support manufacturing and production operations in a high-precision engineering environment.
Key Responsibilities
Set up, operate and maintain CNC machines (including turning and milling)
Read and interpret engineering drawings and technical specifications
Produce components to tight tolerances and quality standards
Carry out routine machine maintenance and basic fault finding
Perform in-process inspections using measuring equipment ( micrometers, verniers)
Follow HSE, quality and company procedures at all times
Requirements
Proven experience as a Machinist , CNC Machinist, Machinist Technician
Strong experience with CNC turning and milling
Ability to read and work from technical drawings
Knowledge of precision measurement tools
Engineering qualification or apprenticeship (preferred)
Experience in oil and gas, aerospace, defence, or heavy engineering environments is an advantage
....Read more...
A leading oil and gas engineering company is looking for an experienced Machinist to support safe, efficient and reliable manufacturing operations. You will set up, operate and maintain lathes and CNC machines to produce electrical connector components to specification. The role involves machine maintenance, quality inspection, fault finding and continuous improvement activities within a busy machine shop environment.
Key responsibilities
Set up and operate machines safely and efficiently
Maintain equipment and report faults or deviations
Inspect components to ensure quality and accuracy
Follow production schedules and safety procedures
Participate in shop floor and toolbox meetings
Key Skills
Previous machine shop experience
Ability to read and interpret technical drawings
Mechanical engineering qualification
Basic CNC programming experience
....Read more...
Join a leading subsea engineering team delivering cutting edge solutions for oil and gas projects focused on asset performance, energy efficiency, and emissions reduction.
Subsea Services Planner required to ensure the safe, efficient, and on time delivery of off shore mechanical and electrical engineering assets. The successful candidate will collaborate across departments to drive project readiness, monitor deliverables, and support engineering, manufacturing, and supply chain activities.
Requirements
Relevant subsea engineering background, ideally mechanical.
Strong understanding of technical drawings and project workflows.
Degree in Mechanical, Electrical, or related technical field.
Proficiency in Microsoft Office: SAP, CAD, and MS Project a plus.
Responsibilities
Track and optimize project schedules and deliverables.
Support risk analysis and continuous improvement initiatives.
Collaborate with engineering to ensure manufacturing readiness.
Analyze data to manage or inform business and planning decisions.....Read more...
A leading global technology company in the energy sector is seeking an Electrical Assembly Technician to join its production and testing team in Cumbria. Electrical and mechanical assembly, specifically building electrical contractor pins for Oil and Gas tree systems.
Key Responsibilities
Perform a variety of technical, mechanical, and electronic assembly tasks.
Conduct testing, measurements, and process control on production lines.
Read and interpret engineering drawings, work orders, and bills of materials.
Troubleshoot and repair issues related to mechanical or process performance.
Maintain tools, machinery, and equipment to ensure optimal operation.
Support continuous improvement initiatives and apply modern manufacturing principles.
Key Skills
Proven hands-on experience in mechanical assembly, testing, or manufacturing.
Ability to read blueprints and perform precision electrical tasks such as wire preparation, crimping, and harness termination.
Understanding of hydraulic, electronic, and mechanical systems.....Read more...
Mechanical Technician required to produce and assemble components including conduct tests, measurements, operations and process controls as part of a marine assembly systems manufacturing team.
The ideal candidate will have precision engineering maritime or aerospace production experience reading blueprints to identify components, perform production assembly, test and repair.
Requirements
Manufacturing experience in comparable high value low volume environment, ideally maritime, subsea or aerospace.
Mechanical production using hand tools, automated machines and assemblies.
Quality processes understanding, assembly, test, troubleshoot, repair, test.
Other relevant skills include
Wire preparation, strip, crimp and termination.
Manufacturing Systems tools maintenance and harness repair.
Hydraulic machine operation and programming.
Continuous improvement.
Responsibilities
Mechanical assembly of precision engineers high value projects.
Prosecute test techniques as per cell procedure.
Work from bill of materials, job packets, routings, work orders, wire lists and quality procedures.
Evaluate, repair and maintain production tooling and equipment.....Read more...
A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Engineer to join its on-site operations team in Cumbria.
In this role, you will be responsible for performing a range of technical and mechanical tasks to support production, assembly, and testing processes. You will contribute to maintaining high-quality standards and continuous improvement across manufacturing operations.
Key Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles.
Key Skills
Hands on experience in mechanical assembly, testing, or manufacturing environments.
Ability to read blueprints and perform precision tasks such as wire preparation, crimping, and harness termination.
Familiarity with hydraulic, electronic, and mechanical systems.
Strong problem-solving and diagnostic skills.....Read more...
Machinist required to join an steel tubing manufacturing team who produce offshore and subsea umbilicals comprising of mechanical machined metal components and electrical connectors for power transfer and control communications.
You will help ensure that Oil and gas subsea equipment is produced, assembled and delivered on time by maintaining workshop and field tooling equipment.
Requirements
Metal working, tooling machining, CNC experience.
The ideal candidate will have offshore, subsea or oil and gas equipment experience.
Responsibilities
Operate tools, machining and production equipment.
Maintain equipment and manufacturing systems tools helping drive continuous improvement.
Work from pre job and Toolbox crew and assembly meetings.
Failure investigation as relevant. ....Read more...
We are looking for a Project Delivery Coordinator to help lead the execution of high-impact projects. You will work across engineering, manufacturing, and supply chain teams to ensure every milestone is met on time from initial planning to manufacturing readiness.
What You will Be Doing
Track project schedules and ensure key deliverables stay on target
Collaborate across departments to keep manufacturing and engineering aligned
Provide clear internal and external delivery updates and communications
Evaluate manufacturing efficiency and readiness for new projects
Support scheduling of engineering deliverables and drive continuous improvement
Analyse data to inform business decisions and highlight performance trends
What We are Looking For
A technical background, ideally studying toward or holding a degree in Mechanical or Electrical Engineering
Strong organisational and multitasking skills
Proficiency in Microsoft Office (Excel, PowerPoint, etc.)
Familiarity with SAP, CAD, or MS Project
Comfortable interpreting technical drawings
Experience working with cross-functional engineering or manufacturing teams....Read more...
Manufacturing Technician required to perform technical duties in electronic, mechanical or systems production by completing tests, measurements, operations and process controls.
Requirements
Ability to read blueprints, identify components, wire stripping and crimping, harness repair and termination hand tools for electronics, hydraulics and mechanical assemblies,
Subsea Technology or Manufacturing Centre experience.
Production Workflow knowledge.
Responsibilities
Production Test and Assembly
Use job packets, routings, work orders, wire lists, quality and bills of material.
Maintain production tools and equipment.
Perform troubleshooting to diagnose product, process or program defects and repair them.....Read more...
We are currently looking for an experienced Machinist Technician with CNC experience to support manufacturing and production operations in a high-precision engineering environment.
Key Responsibilities
Set up, operate and maintain CNC machines (including turning and milling)
Read and interpret engineering drawings and technical specifications
Produce components to tight tolerances and quality standards
Carry out routine machine maintenance and basic fault finding
Perform in-process inspections using measuring equipment ( micrometers, verniers)
Follow HSE, quality and company procedures at all times
Requirements
Proven experience as a Machinist , CNC Machinist, Machinist Technician
Strong experience with CNC turning and milling
Ability to read and work from technical drawings
Knowledge of precision measurement tools
Engineering qualification or apprenticeship (preferred)
Experience in oil and gas, aerospace, defence, or heavy engineering environments is an advantage
....Read more...
A leading oil and gas engineering company is looking for an experienced Machinist to support safe, efficient and reliable manufacturing operations. You will set up, operate and maintain lathes and CNC machines to produce electrical connector components to specification. The role involves machine maintenance, quality inspection, fault finding and continuous improvement activities within a busy machine shop environment.
Key responsibilities
Set up and operate machines safely and efficiently
Maintain equipment and report faults or deviations
Inspect components to ensure quality and accuracy
Follow production schedules and safety procedures
Participate in shop floor and toolbox meetings
Key Skills
Previous machine shop experience
Ability to read and interpret technical drawings
Mechanical engineering qualification
Basic CNC programming experience
....Read more...
A leading global technology company in the energy sector is seeking an Electrical Assembly Technician to join its production and testing team in Cumbria. Electrical and mechanical assembly, specifically building electrical contractor pins for Oil and Gas tree systems.
Key Responsibilities
Perform a variety of technical, mechanical, and electronic assembly tasks.
Conduct testing, measurements, and process control on production lines.
Read and interpret engineering drawings, work orders, and bills of materials.
Troubleshoot and repair issues related to mechanical or process performance.
Maintain tools, machinery, and equipment to ensure optimal operation.
Support continuous improvement initiatives and apply modern manufacturing principles.
Key Skills
Proven hands-on experience in mechanical assembly, testing, or manufacturing.
Ability to read blueprints and perform precision electrical tasks such as wire preparation, crimping, and harness termination.
Understanding of hydraulic, electronic, and mechanical systems.....Read more...
Mechanical Technician required to produce and assemble components including conduct tests, measurements, operations and process controls as part of a marine assembly systems manufacturing team.
The ideal candidate will have precision engineering maritime or aerospace production experience reading blueprints to identify components, perform production assembly, test and repair.
Requirements
Manufacturing experience in comparable high value low volume environment, ideally maritime, subsea or aerospace.
Mechanical production using hand tools, automated machines and assemblies.
Quality processes understanding, assembly, test, troubleshoot, repair, test.
Other relevant skills include
Wire preparation, strip, crimp and termination.
Manufacturing Systems tools maintenance and harness repair.
Hydraulic machine operation and programming.
Continuous improvement.
Responsibilities
Mechanical assembly of precision engineers high value projects.
Prosecute test techniques as per cell procedure.
Work from bill of materials, job packets, routings, work orders, wire lists and quality procedures.
Evaluate, repair and maintain production tooling and equipment.....Read more...
A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Engineer to join its on-site operations team in Cumbria.
In this role, you will be responsible for performing a range of technical and mechanical tasks to support production, assembly, and testing processes. You will contribute to maintaining high-quality standards and continuous improvement across manufacturing operations.
Key Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles.
Key Skills
Hands on experience in mechanical assembly, testing, or manufacturing environments.
Ability to read blueprints and perform precision tasks such as wire preparation, crimping, and harness termination.
Familiarity with hydraulic, electronic, and mechanical systems.
Strong problem-solving and diagnostic skills.....Read more...
Machinist required to join an steel tubing manufacturing team who produce offshore and subsea umbilicals comprising of mechanical machined metal components and electrical connectors for power transfer and control communications.
You will help ensure that Oil and gas subsea equipment is produced, assembled and delivered on time by maintaining workshop and field tooling equipment.
Requirements
Metal working, tooling machining, CNC experience.
The ideal candidate will have offshore, subsea or oil and gas equipment experience.
Responsibilities
Operate tools, machining and production equipment.
Maintain equipment and manufacturing systems tools helping drive continuous improvement.
Work from pre job and Toolbox crew and assembly meetings.
Failure investigation as relevant. ....Read more...
Manufacturing Technician required to perform technical duties in electronic, mechanical or systems production by completing tests, measurements, operations and process controls.
Requirements
Ability to read blueprints, identify components, wire stripping and crimping, harness repair and termination hand tools for electronics, hydraulics and mechanical assemblies,
Subsea Technology or Manufacturing Centre experience.
Production Workflow knowledge.
Responsibilities
Production Test and Assembly
Use job packets, routings, work orders, wire lists, quality and bills of material.
Maintain production tools and equipment.
Perform troubleshooting to diagnose product, process or program defects and repair them.....Read more...
Role & Responsibilities
The Apprentice Electrical Maintenance Engineer will learn how to, and then as confidence grows begin to:
Carry out electrical control system installation works, as required by the contract
Complete electrical fault-finding activities required during testing and commissioning works
Perform Planned Preventative Maintenance (PPM), and identify potential electrical problems
Take part in project modernisation work related to crane/moving structure conversion or refurbishment
Carry out Factory Acceptance Testing in line with the FAT documentation for the projects
Take responsibility for, and maintain workshop equipment, ensuring everything is in full working order
Work in line with SCX safety guidelines, ensuring that the correct PPE is worn at all times
Training:
You will study on a Level 3 Mechatronics maintenance technician apprenticeship
On completion of this, you will gain a qualification in Engineering at Level 3 Standard
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the Training Centre for one day a week for knowledge study
Training Outcome:
Completion of the University of Sheffield’s AMRC Training Centre apprenticeships are nationally recognised qualifications which are acknowledged and respected by employers across the world
These can open the door to many more opportunities, such as Engineering Management and Project Engineering positions across a range of sectors worldwide
Employer Description:At SCX, we have built a culture that provides a platform for our people to embrace the highest international standards for engineering design, delivery, quality and safety.
Our solutions operate within demanding environments such as mechanical handling systems for nuclear and defence, kinetic architecture within the construction industry and hydraulic systems in the offshore and renewables sectors.
We train our staff to deliver to the highest levels of quality and we manage our business to globally-recognised standards.Working Hours :Monday - Friday, shifts to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Team working,Initiative....Read more...
Warehouse Stock Operative - Sherburn-In-Elmet - £23,907
Own transport required
The position
This is a full time permanent position based at our customers distribution centre in Sherburn-In-Elmet
Rate of pay: £23,907 per annum
Weekly hours: 37.5 hours per week plus daily 30-min unpaid break
Shift Patterns: 5 days out of 7, 8-hour shifts between: 5am-1pm & 2pm-10pm
Working Environment – Mixed
Full drivers licence and own transport required
A day in the life of a Warehouse Stock Operative
As a Warehouse Stock Operative, you will work as part of a dynamic and supportive team in what can be described as a fast-paced and target driven environment to ensure the stock entering or leaving the depot is accurate.
Our activities vary, so often, you may be required to work across multiple different workstreams such as Goods Inbound checks, Picker Accuracy audits and Load Adherence checks most of which require periods of manual handling.
Job activities
Audit the Inbound accuracy of supplier deliveries on the GFR program.
Audit Picker accuracy of stock destined for stores and fully investigate all errors found.
Adhere to agreed audit and error verification procedures at all times.
Maintain integrity at all times.
Ensure the expected productivity levels are achieved, in line with customer expectations.
Review daily targets in line with customer expectations.
RAS Benefits
Flexible working shifts patterns – just ask!
Competitive salary with optional pension scheme
Regular overtime is available
Free onsite parking & subsidised canteen
Full training to help you perform at your best
Recognition Awards and Incentives
Genuine career progression
Refer a friend bonus
Job specifics
Able to actively respond to both verbal instructions and audible warning devices
The ability to communicate well, both written and verbally.
Basic knowledge of Microsoft Excel and Word
Must be aged 18 years and over
About RAS
Retail & Asset Solutions are an innovative and market-leading organisation providing audit services to some of the UK and Europe’s largest Food, DIY and Apparel retailers. We engage, listen and work with our customers in a way they can trust, often operating as an extension of their own teams to deliver value-added business.
At RAS Supply Chain we have developed specialised expertise in supply chain assurance services. This helps retailers track and verify goods received from suppliers by checking pick and compliance accuracy, as well as easily integrating with customer IT systems to provide real-time management information.
As leaders in innovation, we embrace new technologies and concepts. We were the first company to use barcode scanning with bespoke reporting, and we were also the first to implement wireless RF data transmission. In the Supply Chain field we are the only organisation providing the end-to-end GFR service to retailers and suppliers. In our ongoing quest for innovation, we continue to research and develop solutions by working collaboratively with our customers and by identifying opportunities to drive sales and combat loss.
With approximately 3,500 employees, we have the largest pool of multi-skilled retail trained colleagues located throughout the UK and Ireland. We also have a fleet of over 70 minibuses ready to deliver count teams to any site in the UK, enabling us to deliver greater consistency in personnel and performance.
This role is being handled by Retail & Asset Solutions (RAS). To discuss this vacancy or any other great positions we have please call us on 01689 879444 for a confidential chat about working for our business.
By applying to this role, you are consenting to Retail & Asset Solutions to hold and process your data in compliance with the General Data Protection Regulations. If you have any questions or wish to exercise your right to access, erase or restrict the holding or processing of your data then please contact us at applications@retailassetsolutions.com and we will respond to your query as soon as possible.
....Read more...
Builder or skilled labourer required to join a successful building team to complete general building works on site. Self employed basis. Immediate start available.
Builder or skilled labourer required to join a successful building team to complete general building works on site. Self employed basis. Immediate start available.
Use your personality to inspire and respect your customers and colleagues whilst sharing a great amount of fun
Technology is evolving every day, so is TUI. By providing you with the best tools, you’ll gain knowledge, skills and behaviours to confidently understand our customers and adapt your style to help answer questions, bring holidays to life and improve customer loyalty
If things don’t go to plan, your support network will help you to investigate and resolve any questions or complaints
You’ll embrace change and rise to the challenges of a customer-focused role
Your drive to achieve will lead you to exceed your sales and service objectives; in retail, we call it ‘Smashing your Targets’
Training:Travel Consultant Level 3 Apprenticeship Standard:
You’ll be assigned a Learning Coach who will guide you for the duration of the scheme with the aim of you achieving a Level 3 Travel Consultant qualification
20 per cent of your working week will be set aside for you to work through the standards on your online learning platform, complete practical or written assessments and update your portfolio of work evidence
As part of this, you may also complete Functional Skills in English and maths if required (e.g., if you don't have GCSE Grade 4/C or above or equivalents)
Training Outcome:
Our apprenticeships offer a great route into a varied and exciting career with TUI
Employer Description:Be Yourself… Be Unique! TUI’s more than a brand, it’s who we are. Trusted – Unique – Inspiring. We’re the leading tourism business with diverse customers and over 67,000 employees. Together, we embrace different continents and cultures. We believe travel broadens the mind. Just like our customers, we’re on a journey - of development towards a more digital, connected and integrated future - but we haven’t arrived there yet. We believe that differences drive innovation and we’re encouraging an environment where diverse talent thrives. Inclusion is fundamental to everything that we achieve and it’s our unique colleagues that will shape the future of travel. The TUI Group includes over 400 owned hotels, 16 cruise ships, a digital platform for more than 160,000 tours, activities and experiences, strong tour operators, 1,200 travel agencies and leading online portals, five airlines with around 130 aircraft, and destination services in all major holiday countries around the globe. It covers the entire tourism value chain under one roof. This integrated offering enables us to provide our 21 million customers with an unmatched holiday experience in 180 regions. A key feature of our corporate culture is our global responsibility for economic, environmental and social sustainability. This is reflected in more than 20 years of commitment to sustainable tourism. The TUI Group’s share is listed in the FTSE 250 index, in the Quotation Board of the Open Market on the Frankfurt Stock Exchange, and regulated Market of the Hanover Stock Exchange. As part of our Diversity Equity and Inclusion policy we encourage applications from all sectors of the community. As a Disability Confident Employer we guarantee interviews to disabled applicants who meet the minimum criteria for the role and will make reasonable adjustments to assist in the interview process. Applications are open to all sectors of the communityWorking Hours :Flexibility to work variable shift patterns each week, which include evenings & weekends in line with customer demand. Shift patterns are normally shared 4-weeks in advance. Days and hours to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Team working....Read more...
Assist with the coordination of estate-related tasks across all schools
Support tracking of maintenance requests, planned works, and contractor visits
Maintain accurate records and documentation relating to estates, facilities, and health & safety requirements
Raise and process purchase orders in line with organisational procedures
Liaise with suppliers, schools, and the central finance team to ensure timely delivery and accurate recordkeeping
Monitor order statuses and follow up on outstanding items as required
Assist with gathering, updating, and maintaining compliance documentation for schools
Help ensure estate, operational, and regulatory compliance tasks are completed on schedule
Support audits and reporting by providing accurate and up-to-date information
Support the administration of school meals processes, including data entry, updates, and supplier communication
Help with reconciling meal-related information and maintaining accurate documentation
Provide assistance to schools on meal admin queries when required
Provide consistent and responsive administrative support to the central operations team and school staff
Manage shared inboxes, respond to queries, and ensure effective information flow
Assist with the preparation of reports, records, and documents
Contribute to continuous improvement of admin systems and processes
Assist with PR relating to comms, including letters and social media
Training:
In addition to gaining practical experience in the role, you will also attain an NVQ Level 3 Business Admin qualification which will help start your career and give you an insight into the business' processes and procedures
Our training is all completed remotely via teams with a development coach who will be available for support 24/7 and will arrange weekly/fortnightly meetings with you
You receive 20% off-the-job training during this apprenticeship, which is included in your weekly working hours
Training Outcome:
Potential full-time employment for the right candidate upon successful completion of the apprenticeship
Employer Description:Inspire ATA is an official Flexi-Job Apprenticeship Agency, licenced by the Department for Education. Currently ranked 1st in the Rate My Apprenticeship Top 100 Apprenticeship Employers in the UK Award2024-2025. Inspire ATA specialises in creating apprenticeship opportunities, where we recruit and employ the apprentice on behalf of our host clients, enabling us to offer additional support and a better experience for both the apprentice and the client as the experts in the industry. We arrange the most suitable and appropriate apprenticeship training from one of our partnered training providers. If you are successful in securing an apprenticeship with Inspire ATA, it is important to understand that Inspire ATA will be your employer and theapprenticeship placement will be a separate organisation that simply hosts you as an apprentice. As a Flexi-Job Apprenticeship Agency,Inspire ATA performs an important role in developing the UK labour market and it is our responsibility to ensure that talent is recognised,developed, and matched with business needs, whatever the background of the individual, irrespective of gender, race, disability, age, religion or belief, relationship orientation, marital or civil partnership status, pregnancy or maternity and gender reassignment. We are proud of the diverse nature of our business and work with clients to ensure that all candidates are treated with courtesyand respect.Working Hours :Monday to Friday, 8:00am to 4:00pm, 30 minute lunch.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working....Read more...
As a level 3 apprentice you will be a key member of the nursery team, your daily activities may include:
Planning and implementing fun and educational activities with the children
Play alongside and with children to support their play
Supporting children’s creative and imaginative experiences
Maintaining development records on key children
Supervising children at rest times and at mealtimes
Contributing to and promoting health and safety
Ensuring the play area is clean and tidy at all times
Working closely with parents and providing feedback on their child
Useful qualities to have:
Friendly and approachable
Patient, and caring
The ability to interact positively with children and adults
Flexible and willing to carry out a number of different activities within the job role
Reliable
Trustworthy
Motivated
The ability to work using your own initiative
This position would suit a candidate with a bubbly, outgoing personality who is able to work on their own initiative and is prepared to commit to the work required for an apprenticeship.Training:Level 3 Early Years Educator apprenticeship standard, which includes:
Level 3 Early Years Educator Diploma
End-Point Assessment (EPA)
On the job training
Paediatric first aid qualification
Training Outcome:Progression to a higher qualification or full time employment may be available after completing the apprenticeship.Employer Description:Raised in Bristol at Easton Community Centre is a 67 place day nursery that opened its doors at the beginning of 2018. They provide childcare and early years education for children aged 6 months – 5 years old, but that’s not all they do.
The nursery offer a hand for childen to hold as they begin their education, and they help prepare them fully for what’s to come. The setting offers play-led learning in a space that prioritises a nurturing environment, with a focus on nature and nutrition as children take their first steps towards school.Working Hours :Monday - Friday, hours to be determined.Skills: Organisation skills,Creative,Team working....Read more...
