Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies.
Key Responsibilities
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems....Read more...
Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies.
Key Responsibilities
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems
....Read more...
Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies.
Key Responsibilities
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems....Read more...
Electrical Control and Instrumentation Designer required to join a nuclear PLC control panel implementations including cabling, MCCs, Drives, Controls, Switchgear and related EC and I nuclear equipment. This role requires travel including short periods away on customer site visits.
Requirements
Nuclear control panel design experience of PLC, I/O, Comms cards, UPS, etc.
Cabling systems P, Inst, Contr, and comms, surveying, cable sizing calculations and earth protection.
Specialist knowledge of Rockwell Control Logix, Siemens PC7S, TIA Portal or Schneider M580, M340.
Motor Control Centres specification, procurement and installation.
DSEAR Regulations and hazardous area best practices.
Functional Safety understanding of IEC 61508 or 61511.
Control system installation and commissioning experience.
BS7671 IEE 18th Edition Wiring Regulations knowledge.
Degree or HND in a relevant subject, with over years relevant experience.
Full UK driving license.
Willing to undergo security clearance checks.
Responsibilities
Produce system designs based on customer requirements and specifications.
Create Design Packs, including system drawings, schematics, wiring diagrams, and site cable drawings.
Lead and drive the project team, ensuring compliance with procedures and standards.
Support site acceptance testing and commissioning activities.
Contribute to tender documents and cost estimates. ....Read more...
Installation of electrical containment.
Installation of electrical cabling.
Termination of cabling.
Assisting electrician in inspecting and testing.
Following development plan set by line manager.
Training:Level 3 (A level)Typical duration: 48 months
Dedicated Performance Coach.
Day release.
Functional Skills Maths and English if applicable.
Training Outcome:Several areas of the business to develop into, including site management, PLC programming, Instrumentation and Control delivery.Employer Description:M&E business operating in the water industry for over 25 years. Provide MEICA installations alongside telemetry and SCADA for water utility providers (Formerly JRP).Working Hours :Number of Hours: 40
Lunch break length: 1 hour
Start Time: 08:00 (can vary depending on travel time)
Finish Time: 16:00 (can vary depending on travel time)Skills: Communication skills,Presentation skills,Logical,Team working,Initiative,Patience,Physical fitness,Interested in electrical engin....Read more...
Electrical Control and Instrumentation Designer required to join a nuclear PLC control panel implementations including cabling, MCCs, Drives, Controls, Switchgear and related EC and I nuclear equipment. This role requires travel including short periods away on customer site visits.
Requirements
Nuclear control panel design experience of PLC, I/O, Comms cards, UPS, etc.
Cabling systems P, Inst, Contr, and comms, surveying, cable sizing calculations and earth protection.
Specialist knowledge of Rockwell Control Logix, Siemens PC7S, TIA Portal or Schneider M580, M340.
Motor Control Centres specification, procurement and installation.
DSEAR Regulations and hazardous area best practices.
Functional Safety understanding of IEC 61508 or 61511.
Control system installation and commissioning experience.
BS7671 IEE 18th Edition Wiring Regulations knowledge.
Degree or HND in a relevant subject, with over years relevant experience.
Full UK driving license.
Willing to undergo security clearance checks.
Responsibilities
Produce system designs based on customer requirements and specifications.
Create Design Packs, including system drawings, schematics, wiring diagrams, and site cable drawings.
Lead and drive the project team, ensuring compliance with procedures and standards.
Support site acceptance testing and commissioning activities.
Contribute to tender documents and cost estimates. ....Read more...
A job as a Failure Analysis Engineer has urgently arisen for a global leading Semiconductor Manufacturing company, based in Oldham, Manchester.
A great opportunity has arisen for a Failure Analysis Engineer to join my client, based in Oldham, Manchester who will play a pivotal role in performing electrical and physical analysis on IC and discrete products across their life cycle. You will be working to diagnose semiconductor products failures through root cause analysis techniques as well as failure analysis tools such as SEM, EDX and X-Rays.
The Failure Analysis Engineer based in Oldham, Manchester, will ideally have experience across;
Experience in a range of test instrumentation such as optical microscopes, probes, and curve tracers
Identifying root cause through 8D’s for semiconductor product failures
Use of failure analysis techniques such as SEM, TEM, OBIRCH and EMMI
APPLY NOW, if this Failure Analysis Engineer job in Oldham, Manchester sounds like the opportunity for you. Alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1324. If this job is not suitable but you are looking for a job within Manufacturing and Operations, please call 01582 878 848 for a confidential discussion.....Read more...
Electrical maintenance
Mechanical maintenance
Preventative maintenance
Continuous improvement maintenance
Instrumentation maintenance
Training:
Initial off the job practical training
Level 3 Diploma Advanced Manufacturing Engineering (Development Technical Knowledge). Day release at college for two academic years
In house training within the employer, learning relevant skills to become an engineering fitter
Certificate of Apprenticeship from the Institute for Apprenticeships and Technical Education (IfATE)
Training Outcome:Once the apprentices have completed the 42 months training and successfully passed the End Point Assessment of the apprenticeship, they will be able to maintain/repair/install to a high level, complex equipment/installations.Employer Description:Thousands of North East employees have taken the first steps in their successful careers with a Tyne North Training apprenticeship. We provide apprenticeships in the Engineering and Business Administration across various sectors in different employers based in the north east of England, including Newcastle Upon Tyne.
We work alongside leading manufacturing and engineering employers throughout the local area across Northumberland and Tyne and Wear who are looking for aspiring Engineering apprentices to join them in September 2025.Working Hours :Days and shifts to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Logical,Team working,Initiative....Read more...
**During the first year of the apprenticeship, you will be studying at college and will be paid for this. After the first year, you will transition to working full-time and attend college one day a week.**
Construction and assembly of laboratory rigs and instrumentation within the Wolfson Centre for consultancy, research and teaching activities
To support users of the test rigs and instrumentation with repair, troubleshooting and advice on modification
To maintain, carry out fault diagnosis and repair a wide range of equipment within the laboratory areas, ensuring compliance to safety guidance are maintained to ensure legal compliance
To ensure the security and house-keeping of the laboratory areas are maintained to standards to ensure compliance with statutory and local safety expectations
To manufacture artefacts and test specimens for teaching, research and consultancy using machine tools, hand tools, welding and cutting equipment
To inform the Centre’s Support Manager of requirements for consumable materials and components for the construction of test rigs and apparatus and to advise the manager of suitable suppliers where necessary
To develop a basic knowledge of software used within the school
To use email and to identify consumable and replacement parts as appropriate
To operate access equipment and materials handling plant including forklift trucks, overhead crane, scissor lift and light commercial vehicles for the collection and distribution of materials as required within the school
To facilitate statutory inspections for pressure equipment and lifting gear and also engage with risk assessments and inspections relating to HSAWA, PUWER, COSHH, DSEAR, Fixed
Electrical Installations, PAT etc to ensure compliance
To carry out other duties as requested by the centres management
Liaise with external organisations as appropriate, especially suppliers of equipment and materials and sub-contract manufacturers
Contribute to cross-functional team working with other FES Department staff
Liaise with FES Department staff as required
Continuously improve own knowledge and maintain own continuous professional development (CPD) to fill gaps in the skills base required
Maintain good timekeeping and manage own time to ensure work project schedules are met
Maintain a proactive approach to ensuring technical support needs of the centre, both current and future, are met
Training:Level 3 Education Technician Apprenticeship standard qualification. Training Outcome:Possible full-time employment for the right candidate.Employer Description:Inspire ATA is an official Flexi-Job Apprenticeship Agency, licenced by the Department for Education. Currently ranked 1st in the Rate My Apprenticeship Top 100 Apprenticeship Employers in the UK Award 2024-2025. Inspire ATA specialises in creating apprenticeship opportunities, where we recruit and employ the apprentice on behalf of our host clients, enabling us to offer additional support and a better experience for both the apprentice and the client as the experts in the industry. We arrange the most suitable and appropriate apprenticeship training from one of our partnered training providers.
If you are successful in securing an apprenticeship with Inspire ATA, it is important to understand that Inspire ATA will be your employer and the apprenticeship placement will be a separate organisation that simply hosts you as an apprentice.
As a Flexi-Job Apprenticeship Agency, Inspire ATA performs an important role in developing the UK labour market and it is our responsibility to ensure that talent is recognised, developed, and matched with business needs, whatever the background of the individual, irrespective of gender, race, disability, age, religion or belief, relationship orientation, marital or civil partnership status, pregnancy or maternity and gender reassignment. We are proud of the diverse nature of our business and work with clients to ensure that all candidates are treated with courtesy and respect.Working Hours :Monday to Friday shifts to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Administrative skills,Analytical skills,Logical,Team working,Key interest in Engineering,Reliable,Willing to learn....Read more...
PROJECT MANAGER – PERMANENT – HAMPSHIRE A leading food and drinks manufacturer in Hampshire are looking for a Project Manager to join their Engineering team on a permanent full time basis, where you'll play a crucial role in supporting cutting-edge projects. Your expertise in engineering and project management will drive innovation and excellence, this is your chance to lead and deliver high-quality solutions in a role that challenges and rewards your technical and leadership abilities.Key Responsibilities:
Design, manage, and execute engineering projects from concept to commissioning.
Deliver projects on time, within budget, and to the highest safety and quality standards.
Provide technical support to maintenance teams and contribute to continuous improvement initiatives.
Ensure compliance with health, safety, and regulatory requirements.
Use tools like AutoCAD and Microsoft Project to develop detailed designs and project plans.
What We’re Looking For:
Formal project management qualification (Prince2/PMP) or equivalent experience.
Electrical bias with controls and instrumentation experience.
Engineering HND/Degree, preferably in Electrical Engineering.
Process or chemical engineering background.
Proficiency in AutoCAD and the Microsoft Office Suite.
Knowledge of ATEX, process control, and modern sustainability concepts is a plus.
Exceptional organizational, communication, and problem-solving skills.
Why Apply?
Be part of a culture that champions innovation, collaboration, and excellence.
Contribute to cutting-edge projects in manufacturing, laboratory, and facility improvements.
Benefit from a supportive environment that values continuous improvement and professional growth.
STR Limited is acting as an Employment Agency in relation to this vacancy.....Read more...
An exciting job opportunity has arisen for a RF Electronics Repair Technician based in Norwich, Norfolk to join the market leader involved within an exciting technology sector.
Due to continued growth, they are seeking a RF Electronics Repair Technician to be involved with development and progression of multiple projects.
The RF Electronics Repair Technician’s job responsibilities will include:
- Developing measurement processes for automated systems, utilising test, and measurement instruments. Predominantly working on RF solutions.
- Working with colleagues to identify the resources needed to execute the calibration plan
- Interface with Hardware and Software Engineers and the wider team to review system requirements and construct effective test strategies
- Contributing to the entire hardware/software development life cycle from initial business requirements to deployment, production, and service support
Key skills and experience for the RF Electronics Repair Technician job based in Norwich, Norfolk:
- BSc in Electrical and Electronic Engineering or equivalent experience
- Experience in the test and measurement field utilizing T&M instrumentation including calibration techniques
- Sound understanding of measurement uncertainty analysis and testing RF products
This is a fantastic job opportunity to join a well-established, successful Norwich, Norfolk based company who are investing very heavily in R&D.
To find out more about the RF Electronics Repair Technician job or other potential jobs we currently have at the moment, please contact Ricky Wilcocks on 01582 878834 or 079317 88834 or kindly email your most up to date CV and covering letter to Rwilcocks@redlinegroup.Com....Read more...
A unique opportunity has arisen for a Senior Electronics Design Engineer to join the world leading Product Design Consultancy based in Warwickshire.
Working with customers across a variety of industries their globally operating development teams have helped to create some of the market-leading products within the medical, scientific, consumer and transport markets.
Due to continued growth, they are seeking a Senior Electronics Design Engineer to be based from their Warwickshire campus where you will be instrumental in the design and development of analogue and digital electronic specifications, designs and investigations. Working closely with customers you will be significant in the development of new designs, evaluation of new technologies and guidance of projects across multiple disciplines.
Key skills and experience for Senior Electronics Design Engineer:
Proven background in broad electronics design across analogue and digital
Degree educated with a 1st or 2:1 from a highly reputable electronics university
Excellent verbal and written communication skills
Innovative and creative initiative with a desire to work with complex electronic products
Experience within medical instrumentation / devices would be an advantage
This is a great opportunity to work with a global recognised company who work with some of the world’s leading technology based organisations. A business that offers their employees the freedom to be creative, work across a variety of industries and be able to create career development and personal growth.
To apply for Senior Electronics Design Engineer based in Warwickshire, please send your cv to ntyler@redlinegroup.Com, or for more information contact Natalie Tyler on 01582 878808 or 07751240250.....Read more...
Arconic is manufacturing company based in Kitts Green, Birmingham. We produce aluminium plate primarily for the aerospace industry but also operate in other markets such as defence. The plant was built in 1938 and produced high strength aluminium alloys for aircraft and ships during the Second World War.
Arconic is a well-established business working alongside large aircraft manufacturers
4-year apprenticeship with potential to move on to HNC in mechanical areas
At Arconic, we are looking for people who share our values of integrity, inclusion, and diversity, and who demonstrate agility, results commitment, and the capability to grow themselves and others. In return, we offer the opportunity to Grow Together with ongoing opportunities for professional growth provided by a constantly changing environment, working alongside employees who value the people they work with just as much as the work they do.
This is an exciting opportunity with long-term career prospects and an excellent starting salary. Successful candidates will be working alongside the existing team to carry out predictive, preventative and breakdown maintenance on a diverse range of machinery. This is a diverse role that will provide opportunities and experiences in a multi-functional manufacturing setting where no two days will be the same.
Arconic has excellent opportunities for career progression. Past examples of successful apprentices include our Maintenance Manager, Engineers and Instrumentation personnel.
Arconic invests in personal development and will support further education where linked to business need.
Key responsibilities:
Assist in preventative, predictive and routine maintenance work
Identify and ensure critical spares are stocked and reordered
Co-ordinate with suppliers to supply spare parts for machines
Carry out TPM (Preventative Maintenance) schedules
Carry out the maintenance of plant machinery, electrically or mechanically (depending on your role)
Identifying and liaise with suppliers of maintenance services when required
Investigating maintenance problems affecting production and identify improvements
Maintain and record work and machine breakdown history
Your Working Hours:
Total paid hours each week
Year 1 Working hours: Monday - Thursday 08:00 - 16:30.
Friday, 08:00 - 12:30 when at Make UK.
Year 2 and 3 Working hours:
Days• 8hrs for four days and one day at Make UK
Year 4 Working hours: (shift hours)• 4ON/4OFF DAYSTraining:Together with invaluable commercial and practical experience, you’ll work towards several academic and vocational qualification levels throughout your time with us, which are fully paid for, including:
Advanced Manufacturing Engineering Foundation Competence – in year 1, in 6 week blocks to include 4 weeks at Make UK and 2 weeks in company
Advanced Manufacturing Engineering Development Competence - in years 2 to 4 in company
Level 3 BTEC Diploma in Advanced Manufacturing Engineering Development Knowledge - in Years 2 & 3 on block release to Make UK
In house training in line with your requirements.
Further qualifications deemed necessary by your employer
On completion of your studies, you will achieve your full apprenticeship certification that will prove competence as a Level 3 Engineering Technician.Training Outcome:
Successful apprentices can look forward to a long career within Arconic, with previous apprentices now being in roles such as Engineers, Instrumentation personnel and Maintenance Manager.
Employer Description:Arconic is manufacturing company based in Kitts Green, Birmingham. We produce aluminium plate primarily for the aerospace industry but also operate in other markets such as defence. The plant was built in 1938 and produced high strength aluminium alloys for aircraft and ships during the second world war.Working Hours :Total paid hours each week
Year 1 Working hours: Monday - Thursday, 08:00 - 16:30. Friday, 08:00 - 12:30, when at Make UK.
Year 2 Working hours: Days
• 8hrs for four days and one day at Make UK.
Year 3 & 4 Working hours: (shift hours)
• 4ON/4OFF DAYS.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience....Read more...
Senior Multi Skilled Engineer £57k 4 on / 4 0ff | Days and NightsHertfordshire
Synergi are recruiting for a Senior Multi Skilled Engineer. This role will be working for an established company that provides job security, progression and training. The Senior Multi Skilled Engineer will be responsible for preventative and continual development of production equipment (mechanical, electrical, instrumentation and controls.Responsibilities for the Senior Multi Skilled Engineer
Take a leading role in communicating work instructions
Overseeing maintenance, calibration, repairs, set-up of production equipment ensuring all relevant guidelines and practices detailed below.
Cover key managerial responsibilities as directed by the Engineering Shift Manager.
Undertake maintenance, calibration, repair, and continual development of equipment within the scope of the Engineering Department.
Engage with the planning activities each month and for shutdowns.
Ensure the maintenance and use GMP documentation
Drive continuous improvement to all engineering processes and procedures
Ensure all activities are carried out within the Right First Time principle and in a safe manner.
Lead and encourage the team to improve Health and Safety and working practices.
Requirements for the Senior Multi Skilled Engineer
Experience within the following industries: Manufacturing/Food/Brewery/Dairy/petrochemical
HNC or equivalent formal qualification in main discipline
Full indentured apprenticeship with experience and additional study
Formal qualification in at least one other engineering discipline
Formal qualifications for statutory requirements such as B&P, L*, 17th ED
Relevant engineering degree
Recognised management qualification (eg. IOSH, ILM)
Contact Information: Please apply below or Contact Emmanuel on 01923 227 543 alternatively you can send your CV ....Read more...
Role Overview
We are currently looking for a Controls Engineering Technician to join a leading manufacturing company based in the Plymouth area.
As the Day Shift Controls Engineering Technician, you will be working with the asset care team and providing control system support within the assembly production areas.
Key Duties and Responsibilities
Your duties as the Controls Engineering Technician will be varied however the key duties and responsibilities are as follows:
1. Implement improvements to TPM processes to increase OEE, liaise with department representatives to ensure that PM is successfully initiated and completed within the time frame.
2. Provide support to set-up and maintain pneumatic, hydraulic, and mechanical systems on production equipment.
3. Read electrical drawings, analyse, troubleshoot, and perform maintenance and repairs of any plant electrical systems (including, but not limited to, programmable controllers, servo motors, AC motors, contactors, etc.).
4. Connect to PLC machinery to help diagnose complex faults and make minor software changes, when required under the guidance of the process engineering team.
Role Requirements
To be successful in your application to this exciting role as the Day Shift Controls Engineering Technician we are looking to identify the following on your profile and past history:
1. Level 3 qualification in Electrical Engineering or Computer Science is essential.
2. Proven industry experience in working as a manufacturing engineer/technician with experience in fault finding and root cause analysis within a high-volume manufacturing environment.
3. Demonstrated knowledge and proficiency of PLC operations, robotics, Maintenance, Programming, and the ability to read schematics or machining, tooling design, tooling assembly, part drawings and pneumatic schematics.
Key Words: /Engineering Technician/ /Day Shift/ /Manufacturing/ /Plymouth/ /Production Processes/ /Mechanical Systems/ /Electro-mechanical/ /Process Improvement/ /Technical Skills/ /Leadership/Controls/Instrumentation/PLC/SCADA
Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer. We welcome applications from anyone who meets the role requirements. HRS exclusively supports the STEM sectors, combining recruitment expertise with scientific knowledge to help you advance your career.....Read more...
Technical Laboratory Manager
Birmingham
£57,000 - £65,000 Basic + Bonus + Progression to Technical Director + Company Car + Fuel Card + Company Credit card + Stay away allowance + Flexible working pattern + ‘IMMEDIATE START’
Step foot into a global medical and technical manufacturing company that provides on-site calibration and repair services in the audiometric, acoustic medical sector. Your role as Technical Laboratory Manager positions you at the forefront of the day to day operations where you will help maintain UKAS accreditation for the company while leading on development projects to improve and expand the measurement capabilities of the UK and Ireland laboratories while assisting with the management of lab and on-site calibration systems and associated software (ADACS, NI etc).
Your role as Technical Laboratory Manager is designed for you to hit the ground running while working towards becoming Technical Director. Be greatly rewarded and set up for success working towards a role in the maintenance and development of electro-acoustic standards through membership of the UK, EU and other committees. Your role as Technical Laboratory Manager awaits.
Your Role As A Technical Laboratory Manager Will Include: * Managing Laboratory research and development plans of electro-acoustic standards through membership of the UK, EU and other committees * Based in between Birmingham and Hamilton Scotland with regular travel between * Use calibration system (ADACS) which controls the calibration process and generates calibration certificates, job reportsThe Successful Technical Laboratory Manage will have: * Experience as Service, Engineering or Technical Manager * HNC/HND in electronics, science or engineering discipline. * UK Driving LicensePlease apply or contact James for immediate consideration
Keywords: Research Engineer, Laboratory Manager, Technical Manager, Technical Laboratory Manager, audio, metrology, Instrumentation, service manager, chemist, laboratory assistant, electro scientist, Hamilton Scotland, Birmingham.....Read more...
Materials Engineer – Recent PhD Graduate
A pioneer of novel instrumentation in Cambridge is looking for a research PhD graduate to work on next generation materials, and Newton Colmore is assisting with their search.
The company is ideally looking for a recent physics or electronics PhD graduate who is now ready to apply their academic knowledge in industry. You will be working on highly complex projects that aim to develop robust and versatile materials that solve a series of different problems across multiple applications. A key area of focus is using materials to decarbonise emission-heavy devices and systems.
You will be working alongside engineers and scientists in this multidisciplinary team, scoping new ideas and concepts, and running with these through the entire development process. The company have a strong track record of delivering new innovations to market and this role will give you the opportunity to contribute to that history. Because of the nature of work, this could be a great first destination for you in industry and you will always have new and invigorating projects on the horizon
To be considered for this role we are ideally looking for people with the following attributes;
Strong academic experience with materials, from either a physics, materials science or electronics perspective.
Naturally curious personality and someone who enjoys developing new ideas.
An understanding of experimental testing and data acquisition
Experience with constructing new theories for both new and existing materials.
In exchange for your skills and expertise, the company offer a highly competitive package as well as providing excellent career progression within an innovative environment.
For more information, make a confidential application now and a member of our consulting team will be in touch with more details.
Newton Colmore Consulting is a specialist recruitment and search firm. We help our clients find expert engineers and scientists, globally, across medical devices, biotech, and climate technology. We were founded in 2015 and we exist to introduce inventors and innovators to impactful companies.
....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: Responsible for conducting routine material testing, supporting product and polymer development, analyzing raw materials, investigating product failures, maintaining laboratory documentation, and ensuring compliance with safety and quality standards.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Responsible for routine testing of materials with various analytical instrumentation, including but not limited to: FTIR, TGA, DSC, GPC, GCMS, microscopy, titrations, etc. Supports product and polymer development efforts through material characterization, with supervision. Assists in value engineering projects through analysis and characterization of commercial raw materials, with supervision. Performs root cause analysis of product and installation failures of construction materials, with supervision. Engages in training activities for proper operation, maintenance, and troubleshooting of analytical laboratory equipment. Maintains project documentation and reports for all conducted laboratory testing. Performs calibration verification activities as needed in accordance with ISO 9001 Quality Management System. Conducts all work in accordance with laboratory safety and housekeeping guidelines.
EDUCATION REQUIREMENT:
Applicant must be a Junior or Senior enrolled in a university, pursuing a 4-year chemistry degree.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
Sales Manager
Liverpool
£40,000 - £50,000 Basic + Performance Related Bonuses + Car + Great Opportunity + Market Leader + Great Training + Package + IMMEDIATE START
Great opportunity for a Sales Manager with experience selling into the pharmaceutical or life science industry, to work for a specialist company who will invest in you so you can become an expert! Have the chance to make a big impact on the growth of the company.
This global organisation offers a variety of instrumentation and callibration services and have ambitious and exciting goals and are looking for you to be one of the main driving forces in taking this company to the next level. As a Sales Manager you will be focusing on existing accounts, new business and growing the company.
The role as a Sales Manager will include:
* Sales Manager - covering North West and Ireland * Maximising sales opportunities with existing accounts * Finding new business opportunities * Analysing data and provide updates
The successful Sales Manager will have:
* Background as a Sales Manager / Account Manager or similar * Experiecnce selling into life science / pharmaceutical industries * Happy to travel around North West and Ireland
If interested in this role please apply or contact Georgia Daly on 07458163040 for immediate consideration.
Keywords: sales manager, account manager, technical sales, business development manager, BDM, sales manager, sales engineer, sales executive, swindon, bristol, south west, london, England, UK
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.....Read more...
R&D Test Engineer – Biotechnology
A growing biotechnology inventor in Cambridge are searching for an experienced research and development test engineer to join their in-house testing team.
As a R&D Test Engineer within this organisation, you will be utilising your experience to determine the performance and reliability of brand-new physical products within the biotechnology space.
You will be charged with building prototypes and designing and running experiments to gather performance data on new products at the intersection of science and engineering, meaning you will be working alongside physicists, scientists, and engineers.
It will be your role in ensure that exciting new breakthrough products can make the successful transition from initial concept to manufacturing. This will be done by creating bespoke prototypes and testing programmes which will provide detailed data and insights that can be translated into real-world improvements.
To be considered for this role, we are ideally looking for a candidate who has the following;
Hands-on experience with making and testing prototypes in industry.
Strong data analysis skills and sensor performance testing experience.
Ideally STEM-degree educated.
As well as providing a great opportunity for you to work on a brand-new products within a fast-paced environment the company is offering competitive packages and opportunities for career growth.
For more information, please call Matthew Lowdon of Newton Colmore Consulting on 0044 121 268 2240 or make an application and one of our team will be in touch.
Newton Colmore Consulting is a highly specialist recruitment consultancy operating within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors throughout Europe and the US.
Key words: Test Engineer, Mechanical Engineering, CAD, SolidWorks, Cambridge, Instrumentation, Fluidics, Sensors, Biotechnology....Read more...
In this role you will gain a solid understanding of:
Health, Safety and Risk Assessment including working at heights and manual handling.
Analytical and scientific methods for engineers
Instrumentation and Control Principles and Applications
Mathematics for Engineering Technicians
Principles of attraction/ride maintenance strategy and daily, weekly, monthly, and annual preventative maintenance
Mechanical, Electrical, Electronic and Digital Principles, Processes and Applications
Quality Management/Assurance Principles and Safety Management systems
Applications for Pneumatics and Hydraulics
Destructive and non-destructive inspection techniques
Ride and attraction maintenance processes, principles and applications
Principles of first aid and supporting the evacuation of customers
Training:We work in partnership with JCB Academy to deliver this Institution of Engineering and Technology (IET) accredited apprenticeship scheme. When attending JCB Academy, associated courses or visits, you will act as an exemplary Merlin employee at all times.Training Outcome:As you develop within your role, you will always have Health & Safety as your number 1 priority, learning more about Merlin Entertainments and the amazing career you could have working for the UK’s number 1 Theme Park Resort.Employer Description:There’s so much to do at Alton Towers Resort! With over 40 rides and attractions, the Alton Towers Resort is the UK’s Number One theme park – home to an awesome choice of world-class rollercoasters! As well as the thrills of the UK’s leading Theme Park, the Resort includes five fantastically themed accommodations. The story continues with unforgettable live entertainment, a wacky Waterpark and Extraordinary Golf – all located in 500 acres of beautiful Staffordshire countryside.Working Hours :Your working week will vary as you move through the apprenticeship programme, initially being at The JCB Academy more than at Alton Towers Resort.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience,Physical fitness....Read more...
You will work as an apprentice in our production department at MSA Foams. Here, you will gain hands-on experience in all areas of the manufacturing process.
You will spend three months in each of our production departments to enhance your production skills and gain valuable experience in various engineering-related activities.
Your daily duties will vary depending on the rotation at the time. The departments you will be directly involved with are:
Material Preparation: Conversion of raw foam sheets into pre-machined forms.
CNC Machining: Automated, high-precision shaping using Computer Numerical Control.
Print Application: Specialised printing and graphic implementation for visual enhancements.
Final Assembly and Finishing: Integration of machined components and application of final finishes to achieve product completion.
In addition to this, you will also learn other aspects of manufacturing, including health and safety and quality assurance.
This is a front-loaded course, and you will spend the first 12 weeks at Bournemouth and Poole College to ensure you fully understand the tools used in manufacturing. Once complete, you will work for the rest of your Apprenticeship at MSA.Training:
All apprentices will receive their training manual on their first day with us.
Training Outcome:
Promotion opportunities and further education options also exist on the completion of training.
Employer Description:MSA Foams Ltd, an accredited foam converter under Zotefoams, was acquired by Peli Products UK, a renowned provider of rugged protective cases, in 2012.
With a wide customer base, MSA Foams serves various industries, including defence packaging for military applications, as well as the automotive, aerospace, and industrial sectors.
We specialise in creating bespoke foams for instrumentation, electronics, and other specific customer requirementsWorking Hours :Monday to Thursday, 07:30 to 16:00.
Friday, 07:30 to 15:00.Skills: Attention to detail,Logical,Timekeeping....Read more...
Company Overview
Principal Design Engineer
The company is an award-winning manufacturer of innovative scientific test equipment.
It serves industries spanning conventional and renewable energy sources, alongside diverse industrial sectors.
A highly respected organisation accredited with ISO 9001, ISO 14001, ISO 17034, and ISO 17025 certifications.
Committed to research and development, pushing boundaries in technology and instrumentation.
Benefits of the Role
Principal Design Engineer
Competitive salary
25 days annual leave
Pension
Role Overview
Principal Design Engineer
The company is seeking a talented Principal Design Engineer (Mechanical) to head its mechanical design team, focusing on the development of cutting-edge scientific test instruments. The role involves:
Leading the mechanical design team in the creation of new products and the enhancement of existing designs.
Overseeing daily operations to ensure projects meet deadlines and stay aligned with priorities.
Managing recruitment efforts, conducting performance evaluations, and mentoring team members.
Leading design reviews and driving continuous engineering improvements.
Investigating emerging technologies and incorporating them into product development.
Ensuring all designs adhere to engineering standards, safety regulations, and ISO certifications.
Collaborating with production engineering and supply chain teams to ensure smooth transitions from prototype to full-scale production.
Contributing to the company’s Quality Management System (QMS) and supporting ongoing improvement efforts.
Ideal Candidate
Principal Design Engineer
Holds an engineering degree and possesses a minimum of five years' experience in mechanical design, with a strong background in product development.
Demonstrated ability to lead and develop a team of mechanical design engineers, fostering innovation and collaboration.
A proactive and hands-on approach to problem-solving, with a passion for developing innovative engineering solutions.
Strong proficiency in SolidWorks and other engineering software, with the ability to create detailed designs and simulations.
Consultant: Joshua Cumming
Email: joshuac@otrsales.co.uk
Tel: 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target Recruitment
On Target Recruitment is a specialist agency that focuses on placing high-calibre candidates in Sales, Technical, and Commercial roles across multiple industries, including Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions. With a deep understanding of market trends and industry demands, our consultants are experts in matching the right talent to the right roles, ensuring successful placements at all levels up to Director positions across the UK.....Read more...
Medical Devices Mechanical Engineer – SolidWorks – Cambridge
A growing Medical Devices group is currently seeking a Mechanical Design Engineer to assist in the development of life-saving Medical Devices. Based in South Cambridgeshire, you will utilize SolidWorks for the CAD design of new Medical Devices.
You will collaborate with inventors, physicists, engineers, and scientists to create these life-saving medical devices, and your CAD design skills will be crucial in the development of these innovative Medical Devices.
Ideally, your past or current experience would involve developing medical devices to ISO 13485 standards. However, if your experience lies in CAD design for the life sciences, pharmaceuticals, scientific instrumentation, or wearable tech sectors, we would still like to hear from you.
This role will not be solely computer-based. We require you to have a hands-on engineering element to your mechanical engineering skills, particularly for tasks such as jig assembly, testing, instrument usage, and other essential skills for prototyping and testing the new technologies you will develop.
Knowledge of manufacturing techniques will be valuable, as you will use this knowledge when designing to ensure that the products not only function but can also be manufactured.
While a relevant degree is expected, industry experience of at least a few years will be more crucial. Thus, we welcome applications from individuals who have learned on the job, even without holding a degree.
This company offers an excellent starting salary, a pension plan, bonuses, share schemes, and other benefits typically associated with a blue-chip company.
Due to the expected high level of interest in this role, if you possess the required background, we recommend applying now to avoid missing out.
For more information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Data Science, Machine Learning, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Production Engineer Acton£32,000 - £38,000 Basic + Great Working Environment + Stability + Optional Overtime + Early finishes + Holidays + Pension
Are you a production engineer, with a strong interest in physics, looking to work on scientific and high tech equipment and join a company focused on being a great place to work in a clean environment? If so, you will benefit from working in a bespoke manufacturing environment while increasing your knowledge working on niche, specialist products.
The company specialises in the design, manufacturing and supply of bespoke scientific instrumentation and electromagnetic components and products. Due to continued increase in demand worldwide, they are looking for a production engineer to join their growing company and liaise with the design team. Feel valued and rewarded with training in a bespoke industry.
Your Role As A Production Engineer: * Production Engineer role - Days position (Monday to Friday) * Manage and improve the production process * Liaise with the design engineering team - including carrying out some design work and modifications. The Successful Production Engineer Will Have: * A strong interest in physics / manufacturing (Graduates Welcome) * Knowledge and/or experience within a production or manufacturing environment * Experience with CAD / design work and modifications * Live commutable to Acton, London
Please apply or contact Sam Eastgate for immediate consideration
Keywords: production engineer, production technician, project engineer, production, design engineer, design, physics, degree, masters, MEng, PHD, Acton, London, West London. This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted. ....Read more...
