If you’re a hands-on problem-solver, this could be the apprenticeship for you!
Electricians install, maintain and repair electrical systems in industrial, commercial, and domestic environments. They make sure electrical equipment works correctly and safely
As a Street Lighting Electrician Apprentice, you will develop skills, knowledge and experience working in Technical Services
You will work across the Highways Services Team of Durham County Council within Neighbourhoods and Climate Change
The structured training programme will enable you to gain experience, further education and broad base skills within Technical Services
The apprenticeship role involves working alongside fully qualified Electricians, replacing Street Lighting equipment, fault repairs and maintenance, within an external Highway environment The apprenticeship will be based at Meadowfield Depot but you may be required to work at any council workplace within County Durham.
Training:Electrical, Electronic Product Service and Installation Engineer Level 3.
You will learn from skilled professionals whilst being supported to study towards a recognised qualification. College release day at New College Durham.Training Outcome:Upon completion, you will be a qualified electrician.Employer Description:The council is made up of an elected assembly of 126 councillors accountable to nearly 530,100 people in County Durham. We are responsible for providing a wide range of public services to the people of the county.
We also represent and promote the interests of County Durham when dealing with regional, national and international affairs. Through effective local government, we allow local people to look after their own affairs and to decide how and where money is best spent in their area.
Our powers and responsibilities are determined by Parliament with county council elections held every four years. The most recent election was held in May 2017.Working Hours :Monday - Friday, working hours TBCSkills: Attention to detail,Problem solving skills,Logical,Patience....Read more...
FM Technical Supervisor - Gateshead - Global Facilities Management Organisation: ManufacturingCBW Staffing Solutions are seeking an experienced Technical Supervisor with a strong Mechanical or Electrical bias to join our client’s team at a prestigious manufacturing site, based in Gateshead.This is an exciting opportunity to take on an exciting role in ensuring the seamless operation, maintenance, and compliance of all FM requirements.Package:Competitive salary between £48,000 - £50,000 per annum (depending on experience) Core hours are Monday - Friday (40 hours per week)25 days annual leave plus bank holidaysGenerous workplace pension scheme Training, development & progression opportunitiesResponsibilities:Oversee and coordinate planned and reactive maintenance of all M&E systems, ensuring compliance with statutory and regulatory requirementsProducing and reviewing RAMS/SOP’s for routine maintenance tasksLead a team of engineers and contractors, providing technical support and guidanceLiaise with the client, site management, and external contractors to ensure efficient service deliveryEnsure health and safety protocols are followed, maintaining a safe working environmentManage asset performance, energy efficiency initiatives and continuous improvement projectsMaintain accurate records, documentation, and compliance reports Requirements:Proven experience in a similar Technical Supervisor or Lead Engineer role within the Facilities Management industryStrong M&E knowledge with relevant qualifications (e.g., City & Guilds, NVQ, or equivalent in Electrical/Mechanical Engineering)Experience working in a manufacturing or industrial environment is highly desirableInterested? Apply with a full & up to date CV or contact Aaron Rutter at CBW Staffing Solutions.....Read more...
BMS Installation & Service Engineer – Dundee : Salary: £35,000 - £40,000 DOE + Company Van + Excellent Benefits Package An exciting opportunity has arisen for an experienced BMS Service Engineer to join a well-established energy efficiency control specialist. This role is ideal for a professional with a strong background in BMS installation and previous experience in facilities management and building maintenance. Our client has built a strong reputation within the controls industry, working with high-profile blue-chip companies, hospitals, council buildings, and office blocks. Led by highly respected industry professionals, this company offers a stable and rewarding career path. If you have a solid background in BMS installation within the FM/Maintenance sector, this could be the perfect opportunity for you! Hours of Work:Monday – Friday: 36.5 hours per week (Early finish on Fridays!)Key Responsibilities:Installation, maintenance, and servicing of BMS/HVAC control panelsFault finding, diagnostics, and repairs on BMS systemsProviding technical support and advice to clientsEnsuring compliance with health and safety standardsWorking independently to complete assigned tasks efficientlyRequirements:Qualified in a relevant discipline (Electrical/Engineering)Previous experience in a Field Service role, ideally within HVAC/BMSStrong problem-solving skills with the ability to work independentlyWillingness to learn and adapt to new technologiesFull UK driving licenseKnowledge of the following BMS systems is desirable but not essential:CylonTridiumSchneiderTrendBenefits & Package:Competitive Salary: £35,000 - £40,000 DOE25 Days Annual Leave + 8 Public HolidaysCompany Vehicle (with fuel card)Pension SchemePrivate HealthcareShopping, Leisure & Dining DiscountsOn-Call Rota (Additional weekly payment)This is a fantastic opportunity to join a well-respected company in the energy efficiency sector. If you’re looking for a long-term career with excellent benefits and progression opportunities, apply today!....Read more...
Embedded Hardware Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: FPGA/VHDL, Java or C/C++Nice to have's: Python, Siemens PLC, Maven/Ant, SQL Server, Linux, Docker, GIT, Jenkins, Sonatype Nexus
Our Client:Is a pioneering, family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek a highly skilled Embedded Hardware Developer with a background in Electronic Engineering and experience in FPGA/VHDL to join our client's team. As an Embedded Hardware Developer, you will design, develop, and maintain simulated signal-processing systems, combining C++, Java or Python with FPGA/VHDL.
Your Tasks:
Development and simulation of complex signal processing systems
Design and verification of simulated signal processing system with hardware (mainly FPGA/ VHDL)
Design and development of PCB for control systems
Maintenance and further development of the internal firmware environment and hardware
Commissioning and tests of control systems
Required Skills:
Master’s or Bachelor’s degree in electrical science or similar education
Experience in signal processing, FPGA designs and VHDL programming
Experience in PCB development for control systems
Knowledge of component-oriented design with JAVA OSGI/RCP, with SPS programming (Siemens) and with Python as a plus
Alternatively, strong C++ skills are welcome
Good language skills in English and German (both spoken and written)
Positive work attitude. Collaborative team player with excellent communication skills to support team members
Ability to work in interdisciplinary teams
Benefits:
CHF 100 -130k + Bonus Benefits
Opportunity to work on exciting projects
Collaborative and dynamic international team environment
Remote work options with flexible working hours
Professional development opportunities and mentorship
Comprehensive benefits package, including health insurance, retirement plan, and more
Access to cutting-edge technologies and tools
Recognition and rewards for outstanding performance
30 Days Annual Leave
Location: Aargau, Baden, Switzerland (Remote)Salary: CHF 100 -130k + Bonus Benefits
Mandatory Skillset: FPGA/VHDL, Java or C/C++Nice to have's: Python, Siemens PLC, Maven/Ant, SQL Server, Linux, Docker, GIT, Jenkins, Sonatype Nexus
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/ARG100130....Read more...
Static Multi-Commercial Gas Engineer - West Lothian - Salary 38-40K plus van Would you like to work between 2 sites in the West Lothian area? CBW have a new opportunity for a Commercial Gas Engineer to manage and maintain two sites in West Lothian. This position therefore will come with a company van however very little travel will be required. The successful candidate will have a strong understanding of commercial gas and have a proven track record in commercial building maintenance. Key Duties & Responsibilities: You will be responsible for delivering, services, repairs and maintenance of two buildings Reactive maintenance throughout clients portfolio of propertiesSelf delivery of smaller installationsCover a portfolio of contracted buildings repairing and maintaining various systemsHave the ability to diagnose and identify faults and failures within the equipmentOrder and fit parts or components to the equipment when requiredReactive and planned commercial maintenanceProviding high level of customer service and building strong relationshipRequirements:Hold commercial gas tickets (COCN1 or CODNCO1)A proven track record in commercial building maintenanceElectrical or Air Conditioning understandingClient facingFull driving licensePackage:Salary - Up to £40,000 depending on experience & qualifications Door-to-door travel paidOT at 1.5 and 2.0 Full expensed van and fuel cardMobile phone and company uniformPrivate healthcare22 Days Holiday + Bank HolidaysPension....Read more...
Mechanical Maintenance Engineer - FM Service Provider – Tottenham Court Road– up to £48,000 A Fantastic opportunity to work for a leading FM Service Provider situated in Tottenham Court Road. CBW is currently looking for a Mechanical Maintenance Engineer to be based in a cooperate, blue chip commercial office building based by Tottenham Court Road The successful candidate will be Mechanical biased (NVQ, C&G) with a proven track record working within a blue chip commercial building maintenance environment.Working with the maintenance team on-site, He or she will be required to carry out mechanical, electrical, and fabric maintenance to the following. In return, the company is offering a competitive salary of up to £48,000 for further training and career progression.Duties:Pumps, Motors, Seals, BearingsEmergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toilets, replace taps etcBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsHours of workMonday to Friday08:00 - 17:00 Call out - 1 in 2 PackageUp to £48,00025 days holiday plus bank holidaysPrivate HealthcareOvertime availableCompany pensionRequirementsMechanically / Plumbing qualified (C&G, NVQ etc)A proven track record in Building MaintenanceGood Communication Skills.Good Leadership & Management skillsPrevious experience in healthcare is highly desirable ....Read more...
Military Vehicle Mechanic
Worcester, UK
£32,000 - £35,000 per year
Full-time
Monday to Friday
Are you a skilled mechanic with a passion for supporting the defence industry? This role offers a unique opportunity to work with military and specialist vehicles, contributing to vital defence operations where reliability, safety, and precision are paramount. This position is ideal for a motivated individual who takes pride in maintaining and optimizing critical vehicles used in some of the most demanding environments.
As a Military Vehicle Mechanic, you’ll focus on the diagnostic testing, maintenance, and repair of military and commercial vehicles. Your expertise will ensure these vehicles remain operationally ready and meet the rigorous standards required in defence environments.
Key Responsibilities:
Conduct inspections and diagnostics to assess vehicle conditions for operational readiness.
Perform maintenance and repairs on military and commercial vehicles, including hydraulics and electrical systems.
Test and validate components to ensure compliance with safety and performance standards.
Collaborate with workshop supervisors to address faults and execute necessary repairs.
Maintain compliance with health, safety, and defence industry protocols.
Required Skills and Qualifications:
Proven experience in maintaining and repairing military vehicles, HGVs, or specialist equipment.
Strong knowledge of hydraulic, pneumatic, and electrical control systems.
Excellent diagnostic and problem-solving skills.
Organizational and communication skills to align with defence industry standards.
Valid UK driving licence and eligibility to work in the UK with no restrictions.
Desirable Skills:
Familiarity with military vehicle inspection processes, such as FMT 932 criteria.
Experience with Mercedes-Benz military vehicles or similar.
Here’s what’s on offer:
Competitive Salary
Enhance your skills with ongoing professional development.
Occasional opportunities to travel internationally or to other UK sites.
Comprehensive Benefits
Company pension scheme.
Bereavement leave.
Free on-site parking.
Sick pay.
Keywords: Engineer, Engineering, Automotive, Defence, Kidderminster, Worcester, Droitwich, Malvern, Evesham, Mechanic, Technician ....Read more...
Job Title: Multiskilled Maintenance Engineer Location: Lincolnshire Salary: £52,500 per annum Shift Pattern: 4 on / 4 off (Days & Nights)
Are you a skilled and experienced Multiskilled Maintenance Engineer with a preferable electrical bias, We are currently looking for a highly motivated and proactive engineer to join a leading manufacturing facility in Lincolnshire. This is an exciting opportunity to work on a 4 on / 4 off shift pattern02F;(Days & Nights)
Key Responsibilities:
Carrying out planned preventative maintenance (PPM) and reactive maintenance on production machinery.
Diagnosing and repairing electrical and mechanical faults in a fast-paced environment.
Ensuring that all machinery and equipment are operating efficiently to minimize downtime.
Carrying out installations, modifications, and upgrades as required.
Adhering to health and safety regulations and ensuring a safe working environment.
Supporting continuous improvement initiatives to enhance the reliability and performance of machinery.
Skills & Experience:
Electrical bias with a strong background in maintenance (mechanical skills are a bonus).
Proven experience in a maintenance engineering role, ideally in a manufacturing or production environment.
A strong understanding of electrical control systems, PLCs, and fault finding.
Ability to work autonomously and as part of a team.
Excellent problem-solving skills and the ability to work under pressure.
Relevant engineering qualifications (e.g., City & Guilds, NVQ, or equivalent).
Previous experience with a 4 on / 4 off shift pattern is desirable but not essential.
What’s on Offer:
Competitive salary of £52,500 per annum.
A 4 on / 4 off shift pattern (Days & Nights), providing a great work-life balance.
Opportunities for career progression and professional development.
A dynamic and supportive working environment.
If you would be interested in roles within the above areas, please get in touch.
With Alex on 01923 22754 or feel free to email me on
If this role isn’t suitable for you, we also cover engineering positions within the FMCG and Manufacturing industries across the Lincolnshire, Cambridgeshire, Norfolk and Suffolk areas. ....Read more...
Applications Engineer
Systems Testing and Technical Support
Automotive Industry
Bristol BS16 - Covering UK-wide
Up to £47k per annum
Bonus, 33 Days Holiday, Enhanced Pension
Excellent Benefits Package
Are you looking for an exciting opportunity to use your technical engineering knowledge and move into an Applications and System Test Engineering role within the Automotive industry. If so, read on! This is a great opportunity for an intelligent and analytical engineer, based out of the Bristol office and travelling to customers UK-wide. Commutable from Gloucester, Swindon, Bath and Cheltenham.
Role and Duties:
- Work as part of a team travelling to support UK-based OE vehicle manufacturers with the integration and application of systems for commercial vehicles
- Support to customers covers all phases of a project from the initial conception with the customer, through application, testing and finally with support with field issues
- The application tests involve testing a wide range of systems on a vehicle, either at customer premises or at a suitable test track facility
- The product range to be supported is mainly pneumatic based, but with a high level of electronic control - this includes air compressor, air treatment, brake controllers, foundation brake, levelling control and advanced driver assistance systems
- The role will require answering technical enquiries from the customer, planning and conducting test activities, technical report writing and follow-up of any issues with the customer
- This is an interesting and varied job role which will suit someone who is happy with a mix of hands-on/off work
Skills and Experience Required:
- An electrical or mechanical engineering degree is highly desirable
- Industry experience is desirable but not essential
- Understanding of vehicle CAN (Controller Area Network) is desirable (J1939 an advantage)
- CANalyzer knowledge is also preferable
- Good analytical skills they must be able to review data quickly during test work and adapt test plans accordingly
- Good problem-solving skills
- People skills interacting clearly with customers on a technical level and ability to communicate with multiple teams in different global locations
- Self-motivated, self-prioritising, flexible working approach
- Strong IT Skills
- Use of diagnostic software to control and update electronic control units
Benefits Package
- Salary: Up to £47k per annum
- Annual Bonus of up to £850
- 25 days holiday + bank holidays
- Company car, phone, laptop and expenses
- Private health insurance for employees, married spouse and dependants
- Group Income Protection scheme covering critical illness at 50% of pay, subject to 2 years qualification period
- Group Self-Invested Pension Plan with contributions of up to 12% (employer 7% / employee 5% gross)
- Group Life Assurance at 3.5x annual salary
- Sick pay for certified sickness, subject to length of service in line with company policy
Interested? To apply for this Applications Engineer position, here are your two options:
1. "This is the job for me! When can I start?" - Call now and lets talk through your experience. Ask for Dan Henderson 0116 254 5411 between 8.30am - 5.30pm
2. "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know
Precision People is committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system.
PPDEL....Read more...
Role Climate17 are working exclusively with a High Voltage and Engineering services consultancy who maintain a growing portfolio of large-scale solar farms across the UK and Ireland. They are actively searching for an experienced Field Service Engineer to undertake a mixture of planned, preventative and reactive maintenance across their expanding portfolio of solar farms in Scotland and Ireland. Responsibilities Travel to sites across Central/East Scotland and the Republic of Ireland – vehicle and flights and/or ferries provided.Routine maintenance activities on modules, inverters, cables and connectors, DC and AC distribution boxes.Visual inspection activities, cleaning and report to management team.Routine maintenance activities on module mounting systems, fence and gates, inverter and transformer stations (excluding equipment).Routine maintenance activities on monitoring and communication equipment (data logger, routers, sensors, etc.)Routine maintenance activities on security system devices (cameras, barriers, etc.)Fault finding on electrical components by means of visual inspections or professional site measurement activities (thermal imaging, insulation tester, etc.)Execute corrective measures to keep the system available.Engage and manage subcontractors.Called to perform reactive and corrective maintenance activities as well as, from time to time to manage subcontractors and control quality of activities performed.Partake in the company weekend/public holiday working & callout rota. Requirements Experience in the installation and maintenance of electrical systems for industrial sites.Experience in maintaining large scale solar PV assets.Good knowledge of MS office tools.NVQ Level 3 electrical certification, or equivalent.BS7671 18th edition.C&G 2391 Testing & inspection – Desirable.OP40/AP15 High voltage – DesirableValid and clean car driving license. Location: Remote – sites across Scotland and Ireland. About Us Climate17 is a purpose-led, international Renewable Energy & Sustainability recruitment firm. We provide specialist talent acquisition services to organisations seeking to reduce their environmental footprint, as well as those working towards the decarbonisation of the energy sector. Inclusive Application Process Climate17 is committed to creating a diverse, inclusive and equitable workplace. We believe there is no solution to climate change without people. We aim to increase diversity across all areas and as such, we are committed to partnering with clients and candidates to create an inclusive and sustainable regenerative world. We welcome applications from all qualified candidates, regardless of their ethnicity, race, gender, religious beliefs, sexual orientation, age, or whether or not they have a disability. If you require additional support, equipment or resources in order to participate in the job application or interview process, please let us know.....Read more...
Senior Fire & Security Service Engineer - London & South East – up to £52,000 per anum You will be responsible for carrying out Planned Preventative Maintenance (PPM), Reactive Maintenance, commissioning and extra works/emergencies in accordance with the contract requirements on Fire & Security Systems located in London & M25. Package & Working Hours :Up to £52,000 Salary DOEMonday to Friday 08:00 am – 17:00 pm25 days holiday plus bank (33 days in total)Birthdays off - (If falls on a week day)Vitality healthcareCompany Van & fuel cardKey Responsibilities: Installation & Maintenance: maintain, and service fire alarm systems, intruder alarms, CCTV, and access control systems.Fault Diagnosis & Repairs: Identify and rectify faults efficiently to ensure system functionality and compliance.Compliance & Regulations: Ensure all systems comply with current fire and security legislation and industry best practices.Testing & Inspection: Conduct regular system testing and inspections to ensure optimal performance and safety.Documentation: Maintain accurate records of work completed, including reports on system performance and any required corrective actions.Emergency Response: Provide emergency call-out support when required.Collaboration: Work closely with other engineers, managers, and clients to ensure seamless service delivery.Qualifications & Person Specification:Fire & Security Apprenticeship (or recognised equivalent)City & Guilds Part 3 (Electrical Installation 2360) or recognised equivalentHealth and Safety TrainingIndustry experience with similar maintenance duties including fault diagnosis, rectification and preventative tasksFully experienced in fire alarms and have the certification to evidence thisExperience in IT & NetworkingSupervisory experience for future developmentPlease send your CV to Alex Denton at CBW Staffing Solutions for more information.....Read more...
Air Conditioning Engineer - Prestigious Contract in London - Up to £50,000Exciting role to join a Leading National Maintenance Service provider that is looking to expand its operation and bring in a specialised Commercial Air Conditioning & Refrigeration engineer to supply this service to a high-end mixed-use commercial contract in and around the Mayfair and Belgravia area.You will be joining their current mobile maintenance team working across various high-end buildings carrying out Service and Breakdowns on Air conditioning, HVAC and refrigeration plant. You will be responsible for all commercial Air conditioning maintenance as well as general building services. Hours of Work Monday - Friday 08:00 am -17:00 pm. BenefitsBasic Salary of up to £50,000Van & Fuel cardMonday to Friday 08.00 – 17.0025 days holiday + Bank HolidaysFull company uniformPDA and Mobile phonePensionLife AssuranceEmployee Shares SchemesReward programme & Employee programmeEmployee discounts.RequirementsNVQ Level 2 in Refrigeration & Air conditioning (Minimum)NVQ Level 3 in Refrigeration & Air conditioning (Desirable)Fgas 2079 Cat 1 (Essential)Experience within a Maintenance / Facilities Management environment.Knowledge of Health & Safety, Permit to Work procedures and safe systems of working.Capability to perform manual tasks, including manual handling, working at heights and in confined spacesOn-Call Rota.Good verbal and written communication is important, including the ability to use a mobile device.Self motivated and solutions focussed with the ability to work without supervision but also enjoy working as part of a team.Full Drivers LicenseResponsibilitiesPPM & Reactive maintenanceAir conditioning and refrigeration - Service/maintenanceYour main duties will be service and maintenance on split systems, VRV's, VAV's and VRF's, AHU's, FCU's, Chillers and all HVAC and refrigeration plant.Electrical Knowledge would be beneficial.Extensive building services knowledgePlease send your CV today to Archie Reed at CBW Staffing Solutions to avoid missing the opportunity....Read more...
Catfoss Recruitment Ltd are currently in partnership with a globally respected R&D company that is looking to recruit am Instrumentation Engineer to their expanding team on a permanent basis.We are seeking to recruit an Instrumentation Engineer whose primary function will be to manufacture and install instrumentation for use within our R&D testing facilities. This will include but is not limited to; equipment calibration, the set-up of specialised measurement/monitoring equipment, model assembly and integration for test, troubleshooting and assisting in the operation of facilities.The successful candidate will be expected to demonstrate the drive and commitment necessary for ensuring that work is completed in line with challenging schedule requirements whilst maintaining a clean, safe working environment. To succeed in this position, you must be flexible in your approach to working hours, which will require shift working, and able to respond quickly to a changing workload.Instrumentation Engineer - Working hours: Mon – Fri, Full time, 40 hours per week, shift work required when testing facilities in operation (typical hours are 07.00 – 15:00 and 14.00 – 22:00 on a rotating weekly basis) office hours otherwiseInstrumentation Engineer - Main duties and responsibilities will include: -• Manufacture of bespoke wiring looms and assemblies with reference to circuit drawings / wiring lists.• Hand soldering of fine components at the work-bench and on test models.• Miniature strain-gauge installation and wiring.• Calibration, maintenance, testing and fault-finding of sensors, signal conditioning and data acquisition systems down to component level.• Specify required instrumentation from customer specification.• Support the design and integration of instrumentation into customer models and rigs.• Work as part of a team, involved in the preparation and assembly of models and rigs for testing to defined quality standards, giving consideration to schedule and costs;• Provide instrumentation support for projects in all of company test facilities.• Assist in the operation of company test facilities.• Maintenance of the instrumentation hardware and records.• Preparation and installation of specialist optical measurement systems in test facilities;• Making recommendations for design, process or hardware modifications to support continuous improvement within the department.• General departmental duties such as record maintenance, model storage, organization of equipment, rig maintenance,• Perform tasks with conformance to company Health & Safety Policy and Quality Standards.• Ability to work in confined spaces and at heights.• Flexible approach to shift working patterns & overtime as required.• Undertaking training, where necessary, in support of the above duties, to ensure that safe working practices are observedTraining will be given in all of the specialist activities associated with this position.Instrumentation Engineer - Qualifications & ExperienceThe successful candidate will be an experienced time served technician, preferably educated to HNC/HND Electrical and Electronic Engineering level (or equivalent) with experience of working in an R&D and/or commercial environment.This is an exciting permanent opportunity for the right person to be part of a successful and highly skilled engineering company. In return, we offer a range of benefits including: a competitive salary and pension scheme; free parking; employee assistance programme; optional sharesave scheme, private health insurance and 26 days’ annual leave plus Bank Holidays (increasing with length of service after 5 years’ service)Instrumentation Engineer previous suitable job titles: Instrumentation Technician, C&I Technician, EC&I Technician, Controls Technician etc…
Commutable from Bedford, St Neots, Milton Keynes, Northampton, Wellingborough, Biggleswade etc...The successful candidate must satisfy security clearance requirements – including the last 5 years continual UK residency.Please apply ASAP....Read more...
As an Apprentice Maintenance Engineer your duties will include:
Attend and participate in all training provided
Complete coursework and assessments for apprenticeship qualification
Maintain a detailed training logbook and portfolio of work
Follow instructions from mentors and management team members
Assist engineers with planned preventative maintenance tasks
Learn to diagnose and repair mechanical and electrical faults
Training:Mechatronics Technician Level 3 ST1305
All the Skills, Knowledge & Behaviours associated with this apprenticeship. Successful candidates will be required to attend COWA Wisbech for training one day a week until completion.
You will embark on an apprenticeship to become a skilled Maintenance Engineer, learning through hands-on experience and formal training. Your primary responsibilities involve actively participating in training, completing coursework, and assisting experienced engineers with preventative maintenance and repairs. You'll learn to diagnose faults, use various tools, and contribute to maintenance documentation, all while working collaboratively as part of a team and reporting your progress. You will diligently maintain a training logbook and proactively seek opportunities to enhance your skills.Training Outcome:
For the apprentice to progress into a Maintenance Engineer position at Bespak
Employer Description:Bespak in King’s Lynn are a large manufacturing site with 900 staff. We are the market leader in the industry and have 60 years of experience in the development and commercial supply of pressurised Metered Dose Asthma Inhalers (pMDIs), Metering Valves and Actuators. We make over 1 million devices a day on the King’s Lynn site and every second of the day 1000 people across the world are using one of our devices. We have multiple manufacturing areas on the King’s Lynn site and have over 175 injection moulding machines that create the components that are assembled using our automated systems.Working Hours :Monday to Friday, 8.00am to 4.00pm.
1 day a week (Thursdays) will be at COWA Wisbech PE13 2JE.Skills: Communication skills,Attention to detail,Team working,Good manual dexterity,Good handling skills,Keen interest in engineering,Follow instructions precisely,Strong work ethic,Reliable,Strong work commitment....Read more...
Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.
We have an amazing opportunity for someone to join Forterra as an apprentice and learn how to become a multiskilled (electro-mechanical) maintenance engineer.
Get Paid while you learn
Hands-On Experience with real-world tools and machinery
Training From The Pros – We’ll teach you everything you need to know to become a boss in manufacturing
Growth Potential – This apprenticeship is just the start. We’re all about helping you learn & achieve your goals
The Apprentice Engineer will be responsible for developing skills in the maintenance, and optimisation of systems that combine mechanical and electrical engineering. Through hands-on training and mentorship, the apprentice will learn to support the:
Development
Installation
Maintenance
of automated systems, robotics, and/or machinery while ensuring operational efficiency and safety.
The Apprentice Engineer will be expected to work towards and complete the apprenticeship program with a focus on self-development, progression, and ownership. At the end of the program, they should aim to be a competent maintenance engineer and be able to work well as a key part of a shift team or alone on a multitude of equipment with minimal extra support.Training:This apprenticeship includes spending 30 weeks in Birmingham in Year 1, on a residential basis, where the travel to Birmingham, accommodation on a half board basis (including breakfast and evening meal) and travel to and from the training facility is paid for by Forterra.
In years 2 and 3, you will attend Make UK on block release, 1 week in every 5, again staying in the hotel and paid for by Forterra.Training Outcome:
Should the candidate successfully complete the apprenticeship, possibility of a full time Electro-mechanical Engineering role within the business.
Potential opportunities for further development for a HNC/HND.
Employer Description:Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.Working Hours :At Forterra, you will be scheduled to work 40 hours per week between 7.00am and 6.00pm, Monday to Friday.
At Make UK, your training hours will be Monday, 10:00am to 6:30pm, Tuesday - Thursday, 8.00am - 4:30pm and Friday, 8.00am - 12:30pm.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience....Read more...
Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.
We have an amazing opportunity for someone to join Forterra as an apprentice and learn how to become a multiskilled (electro-mechanical) maintenance engineer.
Get Paid while you learn
Hands-On Experience with real-world tools and machinery
Training From The Pros – We’ll teach you everything you need to know to become a boss in manufacturing
Growth Potential – This apprenticeship is just the start. We’re all about helping you learn & achieve your goals
The Apprentice Engineer will be responsible for developing skills in the maintenance, and optimisation of systems that combine mechanical and electrical engineering.
Through hands-on training and mentorship, the apprentice will learn to support the:
Development
Installation
Maintenance
of automated systems, robotics, and/or machinery while ensuring operational efficiency and safety.
The Apprentice Engineer will be expected to work towards and complete the apprenticeship program with a focus on self-development, progression, and ownership.
At the end of the program, they should aim to be a competent maintenance engineer and be able to work well as a key part of a shift team or alone on a multitude of equipment with minimal extra support.Training:
This apprenticeship includes spending 30 weeks in Birmingham in Year 1, on a residential basis, where the travel to Birmingham, accommodation on a half board basis (including breakfast and evening meal) and travel to and from the training facility is paid for by Forterra
In years 2 and 3, you will attend Make UK on block release, 1 week in every 5, again staying in the hotel and paid for by Forterra
Training Outcome:
Should the candidate successfully complete the apprenticeship, possibility of a full time Electro-mechanical Engineering role within the business
Potential opportunities for further development for a HNC/HND
Employer Description:Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.Working Hours :At Forterra, you will be scheduled to work 40 hours per week between 7am and 6pm Monday to Friday
At Make UK, your training hours will be Monday, 10.00am to 6.30pm, Tuesday - Thursday 8.00am - 4.30pm and Friday 8.00am - 12.30pmSkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience....Read more...
Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.
We have an amazing opportunity for someone to join Forterra as an apprentice and learn how to become a multiskilled (electro-mechanical) maintenance engineer.
Get Paid while you learn
Hands-On Experience with real-world tools and machinery
Training From The Pros – We’ll teach you everything you need to know to become a boss in manufacturing
Growth Potential – This apprenticeship is just the start. We’re all about helping you learn & achieve your goals
The Apprentice Engineer will be responsible for developing skills in the maintenance, and optimisation of systems that combine mechanical and electrical engineering. Through hands-on training and mentorship, the apprentice will learn to support the:
Development
Installation
Maintenance
of automated systems, robotics, and/or machinery while ensuring operational efficiency and safety.
The Apprentice Engineer will be expected to work towards and complete the apprenticeship program with a focus on self-development, progression, and ownership. At the end of the program, they should aim to be a competent maintenance engineer and be able to work well as a key part of a shift team or alone on a multitude of equipment with minimal extra support.Training:This apprenticeship includes spending 30 weeks in Birmingham in Year 1, on a residential basis, where the travel to Birmingham, accommodation on a half board basis (including breakfast and evening meal) and travel to and from the training facility is paid for by Forterra.
In years 2 and 3, you will attend Make UK on block release, 1 week in every 5, again staying in the hotel and paid for by Forterra.Training Outcome:
Should the candidate successfully complete the apprenticeship, possibility of a full time Electro-mechanical Engineering role within the business.
Potential opportunities for further development for a HNC/HND.
Employer Description:Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.Working Hours :At Forterra, you will be scheduled to work 40 hours per week between 7.00am and 6.00pm, Monday to Friday.
At Make UK, your training hours will be Monday 10:00am to 6:30pm, Tuesday - Thursday, 8.00am - 4:30pm and Friday, 8.00am - 12:30pm.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience....Read more...
Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.
We have an amazing opportunity for someone to join Forterra as an apprentice and learn how to become a multiskilled (electro-mechanical) maintenance engineer.
Get Paid while you learn
Hands-On Experience with real-world tools and machinery
Training From The Pros - We’ll teach you everything you need to know to become a boss in manufacturing
Growth Potential - This apprenticeship is just the start. We’re all about helping you learn & achieve your goals
The Apprentice Engineer will be responsible for developing skills in the maintenance, and optimisation of systems that combine mechanical and electrical engineering. Through hands-on training and mentorship, the apprentice will learn to support the:
Development
Installation
Maintenance
of automated systems, robotics, and/or machinery while ensuring operational efficiency and safety.
The Apprentice Engineer will be expected to work towards and complete the apprenticeship program with a focus on self-development, progression, and ownership. At the end of the program, they should aim to be a competent maintenance engineer and be able to work well as a key part of a shift team or alone on a multitude of equipment with minimal extra support.Training:This apprenticeship includes spending 30 weeks in Birmingham in Year 1, on a residential basis, where the travel to Birmingham, accommodation on a half board basis (including breakfast and evening meal) and travel to and from the training facility is paid for by Forterra.
In years 2 and 3, you will attend Make UK on block release, 1 week in every 5, again staying in the hotel and paid for by Forterra.Training Outcome:Should the candidate successfully complete the apprenticeship, possibility of a full-time Electro-mechanical Engineering role within the business.
Potential opportunities for further development for a HNC/HND.Employer Description:Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.Working Hours :At Forterra, you will be scheduled to work 40 hours per week between 7am and 6pm Monday to Friday
At Make UK, your training hours will be Monday 10:00am to 6:30pm, Tuesday - Thursday 8am - 4:30pm and Friday 8am - 12:30pmSkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience....Read more...
Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.
We have an amazing opportunity for someone to join Forterra as an apprentice and learn how to become a multiskilled (electro-mechanical) maintenance engineer.
Get Paid while you learn
Hands-On Experience with real-world tools and machinery
Training From The Pros – We’ll teach you everything you need to know to become a boss in manufacturing
Growth Potential – This apprenticeship is just the start. We’re all about helping you learn & achieve your goals
The Apprentice Engineer will be responsible for developing skills in the maintenance, and optimisation of systems that combine mechanical and electrical engineering. Through hands-on training and mentorship, the apprentice will learn to support the:
Development
Installation
Maintenance
of automated systems, robotics, and/or machinery while ensuring operational efficiency and safety.
The Apprentice Engineer will be expected to work towards and complete the apprenticeship program with a focus on self-development, progression, and ownership. At the end of the program, they should aim to be a competent maintenance engineer and be able to work well as a key part of a shift team or alone on a multitude of equipment with minimal extra support.Training:
This apprenticeship includes spending 30 weeks in Birmingham in Year 1, on a residential basis, where the travel to Birmingham, accommodation on a half board basis (including breakfast and evening meal) and travel to and from the training facility is paid for by Forterra
In years 2 and 3, you will attend Make UK on block release, 1 week in every 5, again staying in the hotel and paid for by Forterra
Training Outcome:
Should the candidate successfully complete the apprenticeship, possibility of a full time Electro-mechanical Engineering role within the business
Potential opportunities for further development for a HNC/HND
Employer Description:Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.Working Hours :At Forterra, you will be scheduled to work between 7am and 6pm Monday to Friday
At Make UK, your training hours will be Monday, 10.00am to 6.30pm, Tuesday - Thursday 8.00am - 4.30pm and Friday 8.00am - 12.30pmSkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience....Read more...
Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.
We have an amazing opportunity for someone to join Forterra as an apprentice and learn how to become a multiskilled (electro-mechanical) maintenance engineer.
Get Paid while you learn
Hands-On Experience with real-world tools and machinery
Training From The Pros – We’ll teach you everything you need to know to become a boss in manufacturing
Growth Potential – This apprenticeship is just the start. We’re all about helping you learn & achieve your goals
The Apprentice Engineer will be responsible for developing skills in the maintenance, and optimisation of systems that combine mechanical and electrical engineering. Through hands-on training and mentorship, the apprentice will learn to support the:
Development
Installation
Maintenance
of automated systems, robotics, and/or machinery while ensuring operational efficiency and safety.
The Apprentice Engineer will be expected to work towards and complete the apprenticeship program with a focus on self-development, progression, and ownership. At the end of the program, they should aim to be a competent maintenance engineer and be able to work well as a key part of a shift team or alone on a multitude of equipment with minimal extra support.Training:This apprenticeship includes spending 30 weeks in Birmingham in Year 1, on a residential basis, where the travel to Birmingham, accommodation on a half board basis (including breakfast and evening meal) and travel to and from the training facility is paid for by Forterra.
In years 2 and 3, you will attend Make UK on block release, 1 week in every 5, again staying in the hotel and paid for by Forterra.Training Outcome:
Should the candidate successfully complete the apprenticeship, possibility of a full time Electro-mechanical Engineering role within the business.
Potential opportunities for further development for a HNC/HND.
Employer Description:Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.Working Hours :At Forterra, you will be scheduled to work 40 hours per week between 7am and 6pm Monday to Friday
At Make UK, your training hours will be Monday 10:00am to 6:30pm, Tuesday - Thursday, 8.00am - 4:30pm and Friday, 8.00am - 12:30pmSkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience....Read more...
Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.
We have an amazing opportunity for someone to join Forterra as an apprentice and learn how to become a multiskilled (electro-mechanical) maintenance engineer.
Get Paid while you learn
Hands-On Experience with real-world tools and machinery
Training From The Pros – We’ll teach you everything you need to know to become a boss in manufacturing
Growth Potential – This apprenticeship is just the start. We’re all about helping you learn & achieve your goals
The Apprentice Engineer will be responsible for developing skills in the maintenance, and optimisation of systems that combine mechanical and electrical engineering. Through hands-on training and mentorship, the apprentice will learn to support the:
Development
Installation
Maintenance
of automated systems, robotics, and/or machinery while ensuring operational efficiency and safety.
The Apprentice Engineer will be expected to work towards and complete the apprenticeship program with a focus on self-development, progression, and ownership. At the end of the program, they should aim to be a competent maintenance engineer and be able to work well as a key part of a shift team or alone on a multitude of equipment with minimal extra support.Training:This apprenticeship includes spending 30 weeks in Birmingham in Year 1, on a residential basis, where the travel to Birmingham, accommodation on a half board basis (including breakfast and evening meal) and travel to and from the training facility is paid for by Forterra.In years 2 and 3, you will attend Make UK on block release, 1 week in every 5, again staying in the hotel and paid for by Forterra.Training Outcome:
Should the candidate successfully complete the apprenticeship, possibility of a full time Electro-mechanical Engineering role within the business.
Potential opportunities for further development for a HNC/HND.
Employer Description:Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.Working Hours :At Forterra, you will be scheduled to work 40 hours per week between 7am and 6pm Monday to Friday
At Make UK, your training hours will be Monday 10:00am to 6:30pm, Tuesday - Thursday, 8.00am - 4:30pm and Friday, 8.00am - 12:30pm.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience....Read more...
Our client is a rapidly growing company who work in partnership with landowners and operators, financing, building, and operating integrated renewable power systems tailored specifically for the marine sector. They finance all development and construction activities, removing the upfront cost burden for their clients. They operate dedicated renewable power assets to help reduce energy bills. By securing power purchase and service level agreements with clients and their operators, they enable fixed, lower energy costs and enhanced energy resilience. They also assume all associated risks, providing greater certainty for long-term planning. They are currently seeking an experienced Grid Connections Engineer to lead key aspects of the grid connection process for their rapidly growing portfolio of renewable energy projects. RequirementsExperience with DNOs and DNO processes.Experience submitting G99 applications, completing grid studies, and grid feasibility studies.Ability to analyse grid offers and work with DNO to achieve a cost-effective connection.Provide engineering input to support the development of a portfolio of projects.Create and present technical reports on projects to the wider team.Support on technical design, layout, site optimisation, and other site considerations.Work closely with colleagues to ensure the successful development and management of projects.Represent the company at industry-relevant events.About youBEng in a relevant degree (Electrical Engineering, Renewable Energy and Electrical Engineering)Organised, with an ability to autonomously manage multiple highly technical projects at once and meet individual targets.Understanding of Grid reform and CP30 legislation.Self-starter willing to work within a small and agile team.Demonstrable knowledge & understanding of DNO connection applications and offers.Knowledge of the distribution and transmission networks.Excellent written and oral communication skills.High attention to detail.Desire to help develop and grow a core function within the company.Demonstrated analytical and problem-solving skills.Renewable energy experience preferred.If you are interested in finding out more information about this Grid Connections Engineer role in London, get in touch. About Us Climate17 is a purpose-led, international Renewable Energy & Sustainability recruitment firm. We provide specialist talent acquisition services to organisations seeking to reduce their environmental footprint, as well as those working towards the decarbonisation of the energy sector. Inclusive Application Process Climate17 is committed to creating a diverse, inclusive, and equitable workplace. We believe there is no solution to climate change without people. We aim to increase diversity across all areas and as such, we are committed to partnering with clients and candidates to create an inclusive and sustainable regenerative world.....Read more...
The HR Dept are currently recruiting for a Service Engineer for our well-established client situated in the Newport area.We are seeking a dedicated and skilled Service Engineer to join. The ideal candidate will be responsible for providing exceptional technical support and maintenance services to our clients. Working as part of a team on an on call rota, the role involves 24/7 service and support to contracted customers. This role requires a proactive approach to problem-solving, good communication skills, and a commitment to delivering high-quality service.We are looking for candidates with programming and PLC experience as well as experience within a maintenance role. The role comes with a base salary, plus call out allowance, and overtime rates.Working within a well-established team, this role provides challenge as well as support to the incoming engineer. Internal training is plentiful, with support from senior engineers and others in the team.We're looking for someone who can think on their feet, problem solve and support colleagues by sharing expertise. The company has a flexible working schedule with hybrid working, a good support structure of like minded engineers and a team ethos.If you feel you have the the relevant experience in a service, design or maintenance role, with PLC and drive experience and software design skills this role could be for you.Responsibilities
Respond to service and breakdown callsConduct preventative maintenance and back ups of electrical equipment to ensure reliability and efficiency.Diagnose and troubleshoot technical issues reported by clients, providing timely solutions.Install new equipment and systems as required, ensuring compliance with safety standards.Maintain accurate records of service activities, including diagnostic reports, schedule of work completed, and client interactions.Collaborate with other departments to support small projects and build the service business.Stay updated on industry trends, technologies, and best practices to enhance service delivery.
Experience
Proven experience as a Service Engineer, Maintenance Engineer, Design Engineer or in a similar technical role is highly desirable.Strong understanding of PLC's & DrivesExcellent problem-solving skills with the ability to work under pressure.Effective communication skills for interacting with clients and team members.A valid driver's license is required for travel to client sites.Familiarity with health and safety regulations in a technical environment is an advantage.If you are passionate about engineering and committed to solving problems, we encourage you to apply for this exciting opportunity as a Service Engineer.
Job Types: Full-time, PermanentPay: £38,500.00-£45,000.00 per yearBenefits:
CanteenCompany pensionCycle to work schemeDiscounted or free foodFree parkingOn-site gymOn-site parkingSick payWork from home
Education:Certificate of Higher Education (preferred)Licence/Certification:Driving Licence (required)To apply please attach an up to date CV to the link provided, ....Read more...
Job description
Job Summary:We are seeking a skilled and experienced Mechanical Engineer (Maintenance) to join our clients dynamic team in the plastics industry. This role involves maintaining, troubleshooting, and repairing mechanical equipment to ensure optimal production efficiency. The position operates on a 4 on 4 off rotating shift schedule, requiring flexibility and the ability to work in a fast-paced environment.Key Responsibilities:
Perform scheduled preventive maintenance on mechanical equipment and systems to minimize downtime.Troubleshoot and repair mechanical failures and breakdowns on production equipment, including injection moulding machines, extruders, and conveyors.Conduct routine inspections and predictive maintenance to identify potential issues before they cause equipment failure.Collaborate with production and quality control teams to ensure machinery operates efficiently and meets production specifications.Maintain detailed maintenance records, including work performed, parts used, and time spent on tasks.Assist in the installation and commissioning of new equipment and machinery.Ensure all maintenance activities comply with safety regulations and company policies.Provide technical support and training to junior maintenance staff and operators.
Qualifications:
Education: relevant Mechanical Engineering qualificationsExperience: Minimum of 3-5 years of maintenance experience in a manufacturing environment, preferably within the plastics industry but not a requirement.Technical Skills:Strong knowledge of mechanical systems, hydraulics, pneumatics, and electrical components.Proficiency in using diagnostic tools and equipment.Familiarity with PLCs and automated control systems is a plus.Certifications: Relevant certifications in mechanical maintenance and safety are desirable.Physical Requirements: Ability to lift heavy objects, stand for extended periods, and work in various environmental conditions.
Personal Attributes:
Excellent problem-solving and analytical skills.Strong communication and teamwork abilities.High attention to detail and a commitment to quality workmanship.Ability to work independently and manage multiple tasks effectively.Flexibility to work rotating shifts, including weekends and holidays as needed.
Benefits:
Competitive salary and shift allowances.Comprehensive health and dental insurance.Retirement savings plan with company match.Paid time off and holidays.Opportunities for professional development and career advancement.
Note: This job description is intended to convey information essential to understanding the scope of the Mechanical Engineer (Maintenance) position. It is not intended to be an exhaustive list of qualifications, skills, duties, or responsibilities associated with the role.Aqumen Business Solutions is acting as an Employment Agency in relation to this vacancy.
....Read more...
Join our client and leverage your expertise and leadership in electronics design to make a significant impact!
Holt Executive is partnered with a leading electro-optics design and manufacturing business, seeking a Senior Electronics Engineer to join their expanding Engineering team. If you are passionate about innovation and leadership in electronics design, this role is for you.
As a Senior Electronics Engineer, you will play a key role in developing cutting-edge electronics and leading a talented team. Your expertise will drive innovation, ensuring high standards of engineering practice and project success.
Key Responsibilities for the Senior Electronics Engineer:
- Expertise in circuit design, components, and PCB technology.
- Work in EMC, Power Management, Servo Control, processor interfacing, and communications.
- Define and review overall architecture, including power management and system wiring.
- Lead by example, setting standards for good engineering practices.
- Drive innovation within the department, regularly communicating with senior management, customers, and stakeholders.
- Lead the development or enhancement of technology, providing subject matter expertise for R&D projects.
- Technical leadership of multi-disciplined projects, fostering a systematic approach and delivering solutions to customers.
- Provide insights into resource planning and support other engineers through training and development.
Key Skills and Experience for the Senior Electronics Engineer:
- Strong degree in a related discipline accredited by the IET, with typically 6 years of relevant experience.
- Proven experience in leading or supervising projects or teams.
- Solid theoretical and practical understanding of electrical and electronic designs.
- Ability to perform analysis-based activities such as circuit emulation and power budgets.
- Capability to assess and highlight key project risks and design activities.
- Awareness of the full project lifecycle from bid development to customer support.
- Proven track record of innovation-based approaches in engineering and leading, managing, or mentoring engineers.
- Ability to investigate and fault-find technical problems at PCB or system level.
- Experience with Embedded Software Design, including ARM/KEIL.
- Knowledge of EMC to military standards and managing issues at architecture and embedded levels.
- Understanding of motors and drive technology, with skills in control systems analysis.
- Proficiency in analysis and simulation tools such as Python, MATLAB, Simulink, LT-Spice, Simetrix.
- Familiarity with management tools like JIRA, Confluence, MS Project.
- Expertise in PCB design tools such as Altium, Cadence OrCAD.
- Familiarity with design resilience techniques like Failure Mode Effects Analysis.
- Awareness of Lightning Direct and Indirect Effects.
Company Benefits:
- 37.5-hour work week with lunchtime finishes on Fridays.
- 28 days annual leave and Christmas closure.
- Employee Help@Hand Service providing access to remote GP services, second opinions, mental health support, and physiotherapy consultations.
- Life Assurance Policy, including Bereavement Counselling and Probate Helpline.
- Company Share Incentive Plan and Save as You Earn Scheme.
- Wellbeing initiatives, including access to the Aviva Wellbeing App and regular wellbeing activities.
- Employee discount scheme, including access to a wellbeing hub.
- Excellent Learning & Development opportunities.
Security Clearance Requirements:
Due to the nature of our business, our staff need to be able to obtain UK Security Clearance as a mandated requirement. Therefore, if successful, you will need to provide proof of identity, employment history and right to work in the UK, along with proof of UK residency for at least five years.
If your skills and experience match this exciting Senior Electronics Engineer opportunity, we encourage you to apply now!....Read more...
