Electrical Engineer - Farnborough, Hampshire - Temp - FM Service Provider Are you an Electrical Maintenance Engineer looking for a new challenge?If the answer is yes, then read on...A Fantastic opportunity to work for a leading FM Service Provider situated in Farnborough. CBW is currently looking for an Electrical Maintenance Engineer to be based in a commercial building located in Farnborough. The successful candidate will be electrically biased (NVQ, C&G, 17th / 18th Edition etc) with a proven track record in commercial building maintenance. Working with the maintenance team on-site, He or she will be required to carry out electrical, mechanical, and fabric maintenance to the following.Duties & Responsibilities:Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - ResetWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsHours of workONE DAY EACH WEEK - WEDNESDAYs ONLY 08:00am - 17:00pm Starting ASAP Temp on going £23 - £25 per hour (Negotiable) RequirementsElectrical qualified (C&G, NVQ etc)A proven track record in Building MaintenanceGood Communication Skills.Multi-Skilled - Mechanical / Electrical.Good Leadership & Management skillsIf you are interested please email your CV to Katie at CBW Staffing Solutions for more information.....Read more...
Electrical Engineer - Bristol, St Werburgh's - Temp - FM Service Provider - Up to £23 per hour Are you an Electrical Maintenance Engineer looking for a new challenge?If the answer is yes, then read on...A Fantastic opportunity to work for a leading FM Service Provider situated in Bristol, St Werburgh's. CBW is currently looking for an Electrical Maintenance Engineer to be based in a commercial building located in Bristol. The successful candidate will be electrically biased (NVQ, C&G, 17th / 18th Edition etc) with a proven track record in commercial building maintenance. Working with the maintenance team on-site, He or she will be required to carry out electrical, mechanical, and fabric maintenance to the following.Duties & Responsibilities:Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - ResetWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsHours of work08:00am - 17:00pm Monday - Friday Starting ASAP Temp on going £22 - £23 per hour RequirementsElectrical qualified (C&G, NVQ etc)A proven track record in Building MaintenanceGood Communication Skills.Multi-Skilled - Mechanical / Electrical.Good Leadership & Management skillsIf you are interested please email your CV to Katie at CBW Staffing Solutions for more information.....Read more...
Electrical Engineer - Cardiff - Temp - FM Service Provider - Up to £23 per hour Are you an Electrical Maintenance Engineer looking for a new challenge?If the answer is yes, then read on...A Fantastic opportunity to work for a leading FM Service Provider situated in Cardiff, Ferry Road. CBW is currently looking for an Electrical Maintenance Engineer to be based in a commercial building located in Cardiff. The successful candidate will be electrically biased (NVQ, C&G, 17th / 18th Edition etc) with a proven track record in commercial building maintenance. Working with the maintenance team on-site, He or she will be required to carry out electrical, mechanical, and fabric maintenance to the following.Duties & Responsibilities:Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - ResetWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsHours of work08:00am - 17:00pm Monday - Friday Starting ASAP Temp on going £22 - £23 per hour RequirementsElectrical qualified (C&G, NVQ etc)A proven track record in Building MaintenanceGood Communication Skills.Multi-Skilled - Mechanical / Electrical.Good Leadership & Management skillsIf you are interested please email your CV to Katie at CBW Staffing Solutions for more information.....Read more...
Electrical Engineer - Holloway, North London - Temp - FM Service Provider - £24 per hour Are you an Electrical Maintenance Engineer looking for a new challenge?If the answer is yes, then read on...A Fantastic opportunity to work for a leading FM Service Provider situated in Holloway, North London. CBW is currently looking for an Electrical Maintenance Engineer to be based in a commercial building located in Holloway. The successful candidate will be electrically biased (NVQ, C&G, 17th / 18th Edition etc) with a proven track record in commercial building maintenance. Working with the maintenance team on-site, He or she will be required to carry out electrical, mechanical, and fabric maintenance to the following.Duties & Responsibilities:Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - ResetWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsHours of workShift 12:00m - 00:00am 4 on 4 off Starting ASAP Temp on going £24 per hour RequirementsElectrical qualified (C&G, NVQ etc)A proven track record in Building MaintenanceGood Communication Skills.Multi-Skilled - Mechanical / Electrical.Good Leadership & Management skillsIf you are interested please email your CV to Katie at CBW Staffing Solutions for more information.....Read more...
Mobile Air Conditioning Engineer - Central Belt - Up to £43,000 plus van and excellent benefits! CBW Staffing Solutions are seeking a skilled Air Conditioning Engineer to join our client’s team of facilities management professionals. The ideal candidate will have a strong background in HVAC maintenance and repair, responsible for maintaining and servicing air conditioning systems to ensure optimal performance and end-client satisfaction. Package:Competitive salary between £40,000 - £43,000 per annum (depending on experience)Van & fuel card suppliedCore hours are Monday - Friday (40 hours per week)Participation in an ‘out of hours’ on call rota (to be confirmed)25 days annual leave plus bank holidaysGenerous workplace pension schemeTraining, development & progression opportunities Responsibilities:Maintain, service and troubleshoot a variety of air conditioning systems, including split systems, VRV/VRF systems, and chillersPerform routine maintenance tasks, such as cleaning coils, replacing filters, moving parts, to prolong the lifespan of HVAC equipmentDiagnose and repair mechanical and electrical faults in air conditioning units, ensuring minimal downtime and maximum efficiencyConduct inspections and assessments of HVAC systems to identify potential issues and recommend appropriate solutionsCollaborate with other maintenance personnel and contractors to coordinate complex repairs and system upgradesAdhere to safety protocols and industry regulations to promote a safe working environmentQualifications:Proven experience as an Air Conditioning Engineer or similar role within the facilities management industryHold your F-Gas Cat 1 Regulations certificationFull UK driving licenceStrong knowledge of HVAC systems, including installation, maintenance, and repair techniquesFamiliarity with refrigeration principles and equipmentProficiency in diagnosing and troubleshooting mechanical and electrical faultsExcellent problem-solving skills and attention to detailAbility to work independently and as part of a teamEffective communication and customer service skills....Read more...
Our client is a UK leading manufacturer within their sector and is now looking to extend their engineering division with an Electrical Maintenance Engineer. This is for one of their manufacturing sites within the Northwest area of Leicester.The basic salary is £51K with a KPI bonus plus overtime is paid at a premium of x1.5, with current OT available to circa 8,500 per annum. This totals an OTE minimum earning of £60K+The shift pattern is 5 Days On, 5 Off, 5 Nights On, 5 Off, 4 Days On, 4 Off. (06:00-18:00 / 18:00-06:00).The company is a UK leading, specialist manufacturer within its field and has a strong, well-respected reputation that’s continued for over 100 years. They are a very organised, fast paced and efficient company who have strong management structures in place along with state-of-the-art modern technology and machinery. Anyone who has the opportunity to work for this company is provided with consistent training, development opportunities and up skilling.What’s in it for you as a Electrical Maintenance Engineer?
Basic salary of £51K plus a KPI bonus
TRAINING & DEVELOPMENT - Our client aims to operate to world-class standards and the successful candidate will be required to commit to a focused programme of training and development programme such as PLC training
Company pension matched to 10%
Generous holiday allowance
Overtime opportunities paid at a premium of x1.5 for those who want it.
Roles and Responsibilities of an Electrical Maintenance Engineer:
Responsible for plant wide proactive and reactive Electrical Maintenance activities to ensure the optimum performance of the factory.
Carry out PPM schedules and Reactive Maintenance Activities as required.
Carry out work upon all electrical elements such as motors, invertors, safety circuits, performing basic fault finding on PLC’s etc. Extensive training will also be provided on Siemens PLC S7 TIA portal systems along with further upskilling opportunities.
To Be Successful as an Electrical Maintenance Engineer:
You will need to hold the following Electrical Vocational and Technical qualifications to be considered: City and Guilds Level 3 AND BTEC Level 3 or higher with NVQ Level 3, OR be Apprentice trained to level 3 or equivalent.
Strong planned and reactive electrical maintenance experience within a manufacturing environment as an Electrical Maintenance Engineer
In return, you will be offered a truly varied role within a dynamic and a fast-paced business, providing opportunities to develop your skill sets and progress your career.Please apply now or contact
Electrical Maintenance Engineer....Read more...
VACANCY: MAINTENANCE ENGINEER – REPAIRING POWER TOOLSLOCATION: SHEFFIELD S9, SOUTH YORKSHIREWORKING HOURS: MON - FRI 08:00 - 17:00SALARY: £24000 - £28000Our ClientOur client is a highly successful business based in Sheffield.As part of this continued growth, they seek an Electrically biased Maintenance Engineer to join their existing team on a permanent basis.The role:This is an exciting opportunity for a Maintenance Engineer with experience repairing a wide range of power tools.Duties include:
Visually inspect and test tools and equipment.Troubleshoot and identify any malfunctioning or damaged parts.Disassemble defective tools and equipment and install new or repaired parts.Conduct PAT and vibration testing when required in line with customer requirements.Order spare parts as required from suppliers.Maintain record systems.Maintain stock levels.
About youApplicants MUST have an understanding of electrical tools and equipment. An electrical background essential as you will be working with high voltage tools.Applicants must be MS Office proficient.The successful candidate would be comfortable working in a small team and have customer service skills.We welcome applications from candidates with experience as Maintenance Engineer, Electrical Engineer, Multi Skilled EngineerFor more information APPLY TODAYAqumen Business Solutions is acting as an Employment Business in relation to this vacancy.....Read more...
An exciting new opportunity for a Customer Support Engineer has arisen with our client in Cambridgeshire.
As the Customer Support Engineer in Cambridgeshire, you will support the company's products in the field and to commission systems worldwide. This role will require someone with strong technical ability, comfortable with customer facing and who can gain a detailed technical understanding of the company's products.
Requirements for the Customer Support Engineer in Cambridgeshire
HNC or above in Electrical/Electronic or Mechanical Engineering
Previous experience in international servicing & commissioning activities
A willingness to travel internationally is essential
Proven ability to remotely troubleshoot customer issues
Ability to deliver operation & maintenance training on company products
Carry out logical fault diagnosis of electro-mechanical systems
This is a great opportunity to join one of the world's leading developer & manufacturers of thermal imaging systems.
APPLY NOW! For the role of Customer Support Engineer, Cambridgeshire by sending your CV to cgilbert@redlinegroup.Com or call Charlie on 01582 878807 or 07961 158 782 for more information.....Read more...
Fire Alarm Engineer
Location: Chichester, West Sussex
Salary: £28k - £38k + Excellent Benefits
Job Type: Full-Time, Monday - Friday
The Client:
Our client is a well-established engineering firm, providing extensive services in installing and maintaining fire alarm systems for both commercial and residential properties.
The Role:
As a Fire Alarm Engineer, you will play a pivotal role in designing, constructing, and managing the maintenance of fire protection systems.
Responsibilities:
* Confidently install, service, and maintain a variety of fire alarm systems, including conventional, wireless, and addressable units.
* Perform installations and services for emergency lighting, access control systems, and smoke alarms.
* Regularly maintain and repair fire protection equipment.
* Deliver training to clients on the correct usage of fire protection systems.
Requirements:
* Previously worked as a Fire Engineer or in a similar role.
* Understanding of British fire safety standards.
* Expertise in electrical systems relevant to fire safety integration.
* Familiarity with building codes, regulatory standards, and industry benchmarks concerning fire safety.
* Skilled in utilising power tools for installation and service tasks.
* GCSE or equivalent qualifications would be preferred.
Benefits:
* Company car
* On-site parking
* Overtime availability
* Company pension scheme
* Health & wellbeing programme
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: Fire Alarm Engineer, Fire Engineer, Security Engineer, fire alarm, Fire, Engineer, technician
....Read more...
CBW Staffing Solutions are seeking a skilled Air Conditioning Engineer to join our client’s team of facilities management professionals. The ideal candidate will have a strong background in HVAC maintenance and repair, responsible for maintaining and servicing air conditioning systems to ensure optimal performance and end-client satisfaction.This role will be covering the North East of England, predominantly Tyne & Wear and County Durham.Package:Competitive salary between £40,000 - £43,000 per annum (depending on experience)Van & fuel card suppliedCore hours are Monday - Friday (40 hours per week)Participation in an ‘out of hours’ on call rota (to be confirmed)25 days annual leave plus bank holidaysGenerous workplace pension schemeTraining, development & progression opportunitiesResponsibilities:Maintain, service and troubleshoot a variety of air conditioning systems, including split systems, VRV/VRF systems, and chillersPerform routine maintenance tasks, such as cleaning coils, replacing filters, moving parts, to prolong the lifespan of HVAC equipmentDiagnose and repair mechanical and electrical faults in air conditioning units, ensuring minimal downtime and maximum efficiencyConduct inspections and assessments of HVAC systems to identify potential issues and recommend appropriate solutionsCollaborate with other maintenance personnel and contractors to coordinate complex repairs and system upgradesAdhere to safety protocols and industry regulations to promote a safe working environmentQualifications:Proven experience as an Air Conditioning Engineer or similar role within the facilities management industryHold your F-Gas Cat 1 Regulations certificationFull UK driving licenceStrong knowledge of HVAC systems, including installation, maintenance, and repair techniquesFamiliarity with refrigeration principles and equipmentProficiency in diagnosing and troubleshooting mechanical and electrical faultsExcellent problem-solving skills and attention to detailAbility to work independently and as part of a teamEffective communication and customer service skillsIf you are a dedicated Air Conditioning Engineer, looking for a rewarding career opportunity, please apply with your full CV or contact Aaron Rutter at CBW Staffing Solutions.....Read more...
Fire and Security Installation Engineer required to work on the installation, servicing and fault finding of Fire Detection, Intruder Alarm, CCTV, Access Control and Emergency Lighting Systems.
Experience
Installing, servicing, fault finding and repairing Fire and Security devices.
Domestic Electrical and Networking appliances to British servicing, maintenance and commissioning Standards.
Role
Commissioning and servicing Intruder Alarms, Access Control, CCTV, Fire Alarm and Security Systems.
Site survey to design drawings for quotes, installation documents and ongoing servicing.....Read more...
BMS Commissioning Service Engineer - Manchester - Salary 40-50k DOE CBW are looking for a Mobile BMS Engineer to join our team in the Manchester to South Midlands area on a permanent basis. The role of Service Engineer will include carrying out a number of tasks on contracted customer sites, including PFI Schools, PFI Hospitals, Government Estates and MOD sites. The successful applicant will build an on-going relationship with all customers looking after the needs of the site and making improvements where applicable. Key Responsibilites:Install, configure, and commission BMS components and equipment, including sensors, controllers, actuators, and software systems.Carry out maintenance checks on Trend, Tridium and Distech BMS’s on our various sites.Reactive call out rota will be worked (additional financial benefit included for being on call and attending)Provide technical assistance and support to clients regarding their BMS systems.Identify opportunities for improvement/remedial works to improve the performance of the BMS’s for our clients.Prepare proposals and quoting of works as required.Benefits & Salary:On offer is a competitive salary up to 50K, car or car allowance and benefits package, which includes;24 days annual leave (+ public holidays)Life Cover equivalent to 1 times annual salaryEmployee discount shopping schemes on major brands and retailersGym membership discounts Cycle to work scheme Holiday purchase scheme2 corporate social responsibility days per yearBroad range of learning opportunities, such as professional qualifications, collective/individual training, and personalized support programmesPerson specification:2 -3 Years relevant experience.City & Guild / BTec / NVQ Electrical.Extensive knowledge & experience of BMS / HVAC.Knowledge & experience with either Trend, Tridium Controls/Niagara/Distech/Siemens (not all are required as training will be provided)Excellent working knowledge of the electrical industry.Ability to read and interpret Electrical & Mechanical schematic diagrams.Understanding of IT networks.Good working knowledge of AutoCAD.Full UK driving licence.Controls training / experience.Experience with fault finding in electrical panels.Report writing skills.....Read more...
Are you an experienced Commercial Gas Engineer, looking for a mobile role? If so this may be the position for you!CBW Staffing Solutions have a fantastic opportunity for a Commercial Gas Engineer to join a leading facilities management organisation, on a permanent basis.This role will predominantly be covering Tyne & Wear, County Durham and Teesside areas.Package:Competitive salary between £43,000 - £45,000 per annum (depending on experience)Van & fuel card suppliedCore hours are Monday - Friday (40 hours per week)Participation in an ‘out of hours’ on call rota (to be confirmed)25 days annual leave plus bank holidaysGenerous workplace pension schemeTraining, development & progression opportunitiesResponsibilities:Servicing and maintenance of a variety of commercial gas appliances and systems, including boilers, heaters, and pipeworkPerform routine inspections and safety checks to ensure gas systems are operating efficiently and in compliance with industry standardsDiagnose and repair mechanical and electrical faults in gas appliances, ensuring minimal downtime and maximum safetyConduct gas leak tests and carbon monoxide checks to identify and mitigate potential hazardsCollaborate with other maintenance personnel and contractors to coordinate complex repairs and system upgradesAdhere to safety protocols and regulatory requirements to promote a safe working environmentQualifications:Proven experience as a Commercial Gas Engineer or similar role within the facilities management industryGas Safe Register certification and relevant qualifications (e.g., ACS, COCN1, CODNCO1)Full UK driving licenceStrong knowledge of commercial gas appliances, systems, and regulationsProficiency in diagnosing and troubleshooting mechanical and electrical faultsExcellent problem-solving skills and attention to detailAbility to work independently and as part of a teamEffective communication and customer service skillsIf you are a dedicated Commercial Gas Engineer, looking for a rewarding career opportunity, please apply with your full CV or contact Aaron Rutter at CBW Staffing Solutions.....Read more...
Electronic System and Hardware Design Engineer required to work with research teams designing novel military, marine and aeronautical battery systems. My client designs and manufactures specialist batteries, chargers and intelligent power management systems for rugged, high-performance applications.
Skills
Mixed signal analogue and digital system design experience, of measurement or data acquisition circuits.
Degree qualified with commercial electronics design and test experience.
Prototyping, debugging and functional testing of complex electronic boards.
Power electronics knowledge, ideally of DC-DC converter-based systems.
Microprocessor hardware design.
Also practical electrical skills e.g. soldering, troubleshooting, wiring and general test equipment.....Read more...
Field Installation Engineer Birmingham £30,00 - £35,000 Basic + Overtime (£45,000) + Training + Overnight stay (Costs covered) + Van + Fuel + Mobile + Tools + Holidays + Pension Work on exciting projects for the biggest companies in the world and get specific training and overtime to earn £45,000 a year! On offer is a fantastic all-round package allowing you to earn well for the long term as a field installation engineer, whilst becoming a technical specialist. The company installs and services control systems, working across the whole of the UK with the biggest companies in the world.If you are a field installation engineer looking to work for a company where you can be trained to become a technical expert whilst earning an all round great package then apply now! Your role: * Field Installation Engineer role covering the UK * Installations on various projects * Driving Licence required You'll need: * Experienced Installation Engineer * Electrical skills: control panels, relays, transformers * Happy to provide Nationwide Coverage Key words: field service engineer, field engineer, service engineer, field technician, service technician, mobile engineer, mobile technician, maintenance engineer, electrical engineer, electrician, control panels, engineer, technician, shift engineer, shift technician, maintenance technician,Birmingham,Midlands,West Bromwich, Dudley, Coventry If interested please contact Eran at Future Engineering Recruitment on 07458163044 for more information. This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. ....Read more...
Holt Executive are partnered with a leading electro-optics design and manufacturing business, which is seeking a Systems Engineer to join their growing Systems Engineering team.
The successful Systems Engineer will be responsible for systems engineering tasks. This includes ensuring the system meets customer needs by guaranteeing a cohesive design that integrates mechanical, electrical, and software aspects.
Key Responsibilities for the Systems Engineer:
- Requirements Capture and management.
- Functional and Physical Systems Architecture Design and Definition.
- System Modelling.
- Development of Engineering Management Plans (Safety Management, Test Integration & Acceptance, Technical Risk
- Management).
- Gathering of verification evidence for System Requirements.
- Creation of Procurement Specifications for sub-systems and components.
- Writing test specifications.
- Conducting Design reviews.
- Environmental Qualification Plans (EMC, Temperature, Shock & Vibration).
Key Skills and Experience for the Systems Engineer:
Essential
- A relevant degree in Engineering or physical sciences.
- 1 -3 years systems engineering experience in a defence engineering (or similar) company.
- Proficient in the use of requirements management tools (DOORS, Visure or R4J).
- Work package management in JIRA.
- Proficient in Report Writing.
Desirable
- A good degree in Engineering or physical sciences.
- 1 to 3 years of systems engineering experience in a defence engineering (or similar) company.
- Proficient in the use of requirements management tools (DOORS, Visure or R4J).
- Work package management in JIRA.
- Proficient in Report Writing.
Company Benefits:
- 37.5 hour working week and lunchtime finishes on a Friday.
- 28 days annual leave and Christmas closure.
- Employee Help@Hand Service gives you and your family access to four key services including remote GP service, second opinion, mental health pathway service, and physiotherapy consultations.
- Life Assurance Policy, including Bereavement Counselling and Probate Helpline.
- Company Share Incentive Plan and Save as You Earn Scheme.
- Wellbeing initiatives, including access to the Aviva Wellbeing App and the addition of mental health support for all employees plus regular activities across all sites to support and promote well-being.
- Employee discounts scheme (including access to an additional wellbeing hub).
- Excellent Learning & Development opportunities.
If your skills and experience match this Systems Engineer opportunity, we encourage you to apply by sending your CV to info@holtexecutive.com ....Read more...
Electrical Maintenance Engineer - Hampshire - Temp - FM Service Provider - Starting Immediately - £23 per hour Are you an Electrical Maintenance Engineer looking for a new challenge? Are you looking for work in and around Hampshire? Are you looking for temporary work? If the answer is yes, then read on...A Fantastic opportunity to work for a leading FM Service Provider situated in Hampshire. CBW is currently looking for an Electrical Maintenance Engineer to be based in a commercial building located in Hampshire The successful candidate will be electrically biased (NVQ, C&G, 17th / 18th Edition etc) with a proven track record in commercial building maintenance. Working with the maintenance team on-site, He or she will be required to carry out electrical, mechanical, and fabric maintenance to the following. Duties & Responsibilities:Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - ResetWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsHours of work / RateMonday - Friday2 weeks of work 8am - 5pmStarting Immediately £23p/hRequirementsElectrical qualified (C&G, NVQ etc)A proven track record in Building MaintenanceGood Communication Skills.Punctual and reliable Available to start immediately or at short notice If you are interested please email your CV or contact to Cammie at CBW Staffing Solutions for more information.....Read more...
We are looking for a Maintenance Engineer to join a cutting-edge aerospace manufacturing facility. Your role will encompass the maintenance, repairs, and enhancements of the production plant, covering both building and equipment.
Your responsibilities will involve addressing issues with office-based equipment and maintaining precision engineering research and design facilities, which include hazardous chemicals and high-pressure gas systems. The ideal candidate should possess a pragmatic mindset and have practical experience in welding and a variety of maintenance areas, including carpentry, electrical work, HVAC systems, plumbing, compressor and boiler maintenance, vehicle upkeep, and machine shop fabrication.
You should have experience in:
Plumbing, carpentry, and fabrication
Familiarity with hand and electrical tools
Knowledge of machine shop equipment like lathes, band/chop saws, pillar drills, and grinders
Welding and fabrication skills, preferably holding at least a City and Guilds Level 2 certification, with Level 3 or similar structural welding qualifications being advantageous. ASME certification is a plus.
Previous experience in facilities maintenance or engineering fabrication settings
....Read more...
ELECTRICAL BIAS - MULTI SKILLED MAINTENANCE ENGINEER
Location: Swadlincote, South Derbyshire
Type: Permanent, Full-time
Salary: £30,000 - £44,000per annum (dependent on experience) + Shift Allowance
Shift Pattern: Continental Shifts (2 days on/5 off/2 nights on, 2 days on/4 off/3 nights on, 3 days on/5 off/2 nights on)
Responsibilities:
As a Multi Skilled Maintenance Engineer, you will:
Perform day-to-day maintenance activities (electrical and mechanical)
Execute reactive and proactive work, including PPM and improvement tasks
Actively and analytically fault find
Contribute to implementing new working methods and participate in continuous improvement
Be involved in site projects and maintain maintenance monitoring
Mentor Apprentices within the Engineering department
Attend and participate in daily engineering steering, weekly root cause analysis, and monthly energy meetings
EXPERIENCE & SKILLS REQUIRED
Essential:
Previous experience as a Multi Skilled Maintenance Engineer in the manufacturing sector
Electrical qualification or time served experience.
Good working knowledge of health & safety procedures
Desirable:
Knowledge of automated assembly systems
PLC fault-finding, hydraulics, and pneumatic
Benefits:
Pension & Life Assurance
25 days plus bank holidays
Further training and progression
Company perks
Employee Assistance Programme
APPLY TODAY!
Click to apply or call us to discuss this exciting Multi Skilled Maintenance Engineer role in more detail.....Read more...
Fire Alarm Engineer for Manchester
Company:
My client are a family run central based fire & Security company whom Design, Install, Commission and Maintain Fire Systems, CCTV, Access Control and Intruder Systems.
The client cover Lancashire, Cheshire and Merseyside
Role
We are looking for an experienced Fire Alarm service engineer based in or around the Manchester area
Duties will include:
Service
Maintenance
Repairs
Breakdowns
Installation
Interaction with customers and suppliers
Requirements
You must be physically fit,
Experience within the Security industry (Fire industry ideally)
A strong electrical background
Knowledge of Health and Safety
You will be asked to work on call one weekend in three.
Good IT skills
FIA Certificates
Commercial awareness
17th Edition – Ideally
City & Guilds Electrical Engineering – Bonus
NVQ Qualifications – Bonus
Package
The package my client are looking to offer is 35k basic salary which does get reviewed are 3 months, large amount of paid overtime, pension, health care, company vehicle and mobile phone
For further vacancies please visit our website. www.hammondrecruitment.com
If you believe you have the right experience and qualifications please forward your CV
If this position is NOT right for you, still forward you’re CV. We specialise in many industries and have a number of other positions that maybe more suitable for your background.
All communication will be treated confidentiality
Hammond Recruitment Group is acting as an Employment Agency in relation to this vacancy.....Read more...
Fire Alarm Engineer for Kent
Company:
My client are a family run central based fire & Security company whom Design, Install, Commission and Maintain Fire Systems, CCTV, Access Control and Intruder Systems.
The client cover Kent and around South London
Role
We are looking for an experienced Fire Alarm service engineer based in or around the Kent area
Duties will include:
Service
Maintenance
Repairs
Breakdowns
Installation
Interaction with customers and suppliers
Requirements
You must be physically fit,
Experience within the Security industry (Fire industry ideally)
A strong electrical background
Knowledge of Health and Safety
You will be asked to work on call one weekend in three.
Good IT skills
FIA Certificates
Commercial awareness
17th Edition – Ideally
City & Guilds Electrical Engineering – Bonus
NVQ Qualifications – Bonus
Package
The package my client are looking to offer is 35k basic salary which does get reviewed are 3 months, large amount of paid overtime, pension, health care, company vehicle and mobile phone
For further vacancies please visit our website. www.hammondrecruitment.com
If you believe you have the right experience and qualifications please forward your CV
If this position is NOT right for you, still forward you’re CV. We specialise in many industries and have a number of other positions that maybe more suitable for your background.
All communication will be treated confidentiality
Hammond Recruitment Group is acting as an Employment Agency in relation to this vacancy.....Read more...
Fire Alarm Engineer for Kent
Company:
My client are a family run central based fire & Security company whom Design, Install, Commission and Maintain Fire Systems, CCTV, Access Control and Intruder Systems.
The client cover Kent and around South London
Role
We are looking for an experienced Fire Alarm service engineer based in or around the Kent area
Duties will include:
Service
Maintenance
Repairs
Breakdowns
Installation
Interaction with customers and suppliers
Requirements
You must be physically fit,
Experience within the Security industry (Fire industry ideally)
A strong electrical background
Knowledge of Health and Safety
You will be asked to work on call one weekend in three.
Good IT skills
FIA Certificates
Commercial awareness
17th Edition – Ideally
City & Guilds Electrical Engineering – Bonus
NVQ Qualifications – Bonus
Package
The package my client are looking to offer is 35k basic salary which does get reviewed are 3 months, large amount of paid overtime, pension, health care, company vehicle and mobile phone
For further vacancies please visit our website. www.hammondrecruitment.com
If you believe you have the right experience and qualifications please forward your CV
If this position is NOT right for you, still forward you’re CV. We specialise in many industries and have a number of other positions that maybe more suitable for your background.
All communication will be treated confidentiality
Hammond Recruitment Group is acting as an Employment Agency in relation to this vacancy.....Read more...
Fire Alarm Engineer for London Coverage
Company:
My client are a well run London based fire & Security company whom Design, Install, Commission and Maintain Fire Systems, CCTV, Access Control and Intruder Systems.
The client cover Central London and around the M25
Role
We are looking for an experienced Fire Alarm service engineer based in or around theLondon area
Duties will include:
Service
Maintenance
Repairs
Breakdowns
Installation
Interaction with customers and suppliers
Requirements
You must be physically fit,
Experience within the Security industry (Fire industry ideally)
A strong electrical background
Knowledge of Health and Safety
You will be asked to work on call one weekend in three.
Good IT skills
FIA Certificates
Commercial awareness
17th Edition – Ideally
City & Guilds Electrical Engineering – Bonus
NVQ Qualifications – Bonus
Package
The package my client are looking to offer is 35k basic salary which does get reviewed are 3 months, large amount of paid overtime, pension, health care, company vehicle and mobile phone
For further vacancies please visit our website. www.hammondrecruitment.com
If you believe you have the right experience and qualifications please forward your CV
If this position is NOT right for you, still forward you’re CV. We specialise in many industries and have a number of other positions that maybe more suitable for your background.
All communication will be treated confidentiality
Hammond Recruitment Group is acting as an Employment Agency in relation to this vacancy.....Read more...
Fire Alarm Engineer for Manchester
Company:
My client are a family run central based fire & Security company whom Design, Install, Commission and Maintain Fire Systems, CCTV, Access Control and Intruder Systems.
The client cover Lancashire, Cheshire and Merseyside
Role
We are looking for an experienced Fire Alarm service engineer based in or around the Manchester area
Duties will include:
Service
Maintenance
Repairs
Breakdowns
Installation
Interaction with customers and suppliers
Requirements
You must be physically fit,
Experience within the Security industry (Fire industry ideally)
A strong electrical background
Knowledge of Health and Safety
You will be asked to work on call one weekend in three.
Good IT skills
FIA Certificates
Commercial awareness
17th Edition – Ideally
City & Guilds Electrical Engineering – Bonus
NVQ Qualifications – Bonus
Package
The package my client are looking to offer is 35k basic salary which does get reviewed are 3 months, large amount of paid overtime, pension, health care, company vehicle and mobile phone
For further vacancies please visit our website. www.hammondrecruitment.com
If you believe you have the right experience and qualifications please forward your CV
If this position is NOT right for you, still forward you’re CV. We specialise in many industries and have a number of other positions that maybe more suitable for your background.
All communication will be treated confidentiality
Hammond Recruitment Group is acting as an Employment Agency in relation to this vacancy.....Read more...
Fire Alarm Engineer for London Coverage
Company:
My client are a well run London based fire & Security company whom Design, Install, Commission and Maintain Fire Systems, CCTV, Access Control and Intruder Systems.
The client cover Central London and around the M25
Role
We are looking for an experienced Fire Alarm service engineer based in or around theLondon area
Duties will include:
Service
Maintenance
Repairs
Breakdowns
Installation
Interaction with customers and suppliers
Requirements
You must be physically fit,
Experience within the Security industry (Fire industry ideally)
A strong electrical background
Knowledge of Health and Safety
You will be asked to work on call one weekend in three.
Good IT skills
FIA Certificates
Commercial awareness
17th Edition – Ideally
City & Guilds Electrical Engineering – Bonus
NVQ Qualifications – Bonus
Package
The package my client are looking to offer is 35k basic salary which does get reviewed are 3 months, large amount of paid overtime, pension, health care, company vehicle and mobile phone
For further vacancies please visit our website. www.hammondrecruitment.com
If you believe you have the right experience and qualifications please forward your CV
If this position is NOT right for you, still forward you’re CV. We specialise in many industries and have a number of other positions that maybe more suitable for your background.
All communication will be treated confidentiality
Hammond Recruitment Group is acting as an Employment Agency in relation to this vacancy.....Read more...
