Mechanical Design Engineer
Salary up to £50k (DOE)
As a member of the engineering team, The successful Mechanical Design Engineer will be joining a small but highly skilled R&D team where they will be working to progress the company's hardware products. This will entail both developing new products and reforming and improving the existing product range. Your main responsibilities will be
Key Responsibilities
- Creating new products and solutions to meet commercial requirements.
- Reimagining existing products, increasing functionality and potential applications.
- Redesigning products to deliver better performance and to improve manufacturability.
- Cost-engineering of existing products.
- Implementing and maintaining a repository of designs.
- Ensuring correct change-control procedures are adhered to.
- Supporting the production engineers in the development of rigs and processes, where required.
- Ensure all investigations and technical decisions are planned and documented effectively.
- Ensure the delivery of projects to the required timelines.
- Provide regular reports on progress and technical matters to stakeholders.
- Provide technical expertise to other areas of the business as required.
The Right Person
The successful Mechanical Design Engineer will be developing complex measurement instruments deployed in difficult environments so a background in sensors or ingress protection would be beneficial as well as experience in the following areas:
- Masters degree or equivalent in Mechanical or Electronic Engineering, or similar.
- 4+ years industry experience.
- Mechanical design.
- Strong 3D CAD skills (e.g. SolidEdge)
- Cost-engineering.
- Design-for-manufacture.
- Design for ingress protection (e.g. IP68).
- Development from prototype through to manufacture.
- Data analysis and strong numerical skills.
- Technical writing, processes and documentation.
- Problem solving.
- Change control and repository management.
The following skills would be beneficial to a good candidate, but are not essential to the role:
- Assembly and fabrication (e.g. for prototypes).
- Experience in working with electronics.
- Fault-finding electronics and sensors.
- Low power applications.
- BoM creation and obsolescence.
- Sensor calibration and test automation.
- Rapid prototyping.
- Project management.
Interested? Here are your three options
1. This is the job for me, I meet all the requirements Call now and lets talk through your experience. Ask for Jon Webster on between 8.30am 5.30pm
2. I think Im right for this position, but Im not sure about some of the detail Click apply now so I can read your CV and come back to you.
3. Im interested but need to know more about what this job can offer me email jon@precisionrecruitment.co.uk with your CV and questions and I will reply with more detail.
Precision are committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system.
PPTP....Read more...
Are you passionate about delving into the intricacies of Marine Vessels, particularly within the Naval and Commercial markets, focusing on military applications? Are you seeking an opportunity within a globally-reaching organization?Insignis Talent are seeking a Mechanical Design Engineer to join their client, on a permanent basis. This company offers competitive remuneration, a hybrid work model (3 days on-site, 2 days remote), and a genuine commitment to nurturing and advancing the professional growth of their engineers within the company.We are seeking an individual brimming with enthusiasm and resourcefulness, someone who takes great pride in their craft. In this role, you will become an integral part of a dynamic Design Engineering team, involved in crafting products and systems for both domestic and international markets.Key Responsibilities:
Collaborate on the design, technical specification, configuration, and support activities for externally manufactured products and systems.
Ensure timely delivery and accuracy of product documentation.
Furnish support data for products and systems.
Liaise with suppliers.
Engage in the calculation and analysis of shaft line equipment.
Support the design validation and initial testing of relevant products and systems.
Offer technical expertise in purchasing processes.
Maintain compliance with relevant data control standards.
Cultivate an in-depth knowledge base of product specifications, integration, and support.
Develop proficiency in internal tools, processes, and systems.
Desirable Qualifications and Skills:
Degree in Mechanical Engineering or equivalent.
Proven technical background in Mechanical Engineering, preferably in marine propulsion bearing design.
Proficiency in CAD (Solid Edge or similar software).
Familiarity with Office tools.
Proficient in engineering design, adept at creating GA and detailed drawings, and compiling parts lists.
Familiarity or experience with journal bearing design.
Competency in mechanical calculations, especially in bearing design and performance.
Familiarity or experience in shock calculations.
Bonus: Experience or knowledge of MathCAD, Matlab, etc.
Bonus: Understanding of composite bearing materials.
Candidates must be capable of attaining the requisite security clearance level for this position.If you are eager to contribute to cutting-edge projects, make a substantial impact in the realm of engineering and technology, and become an integral part of a forward-thinking organization, we encourage you to apply for this exciting opportunity!....Read more...
Test Development Engineer
How would you like the opportunity to work for one of the local area's most well-known Engineering Companies?
A market leader within their industry, with a strong order book and new markets continually being pursued with new product offerings in development. This role sits within the Test function of the business, supporting the hardware development, test and verification in order to deliver electronic or electrical components and subassemblies into projects and products
Our client seeks a Test Development Engineer who is very much a doer as a primary and a strong Test Technician as a secondary. You will be mentored and supported by the Engineering Manager
The Test Development Engineer will be an experienced hands-on individual who has sound test knowledge and capability with a background in defence, aviation, aerospace, or military would be ideal.
Responsibilities for the Test Development Engineer:
- Conduct Valve Development testing under the supervision and mentoring of R&D technicians, design engineers and the Engineering Manager, applying sound engineering practices in a timeframe consistent with business objectives.
- Design qualification test parameters for the validation of new products in accordance with project objectives and milestones.
- Apply relevant engineering standards, legislation, certification, and customer compliance ensuring comprehensive validation and reporting is delivered.
- Compile test reports as required for documenting design validation compliance and maintaining comprehensive traceability.
- Conduct concurrent engineering tasks optimising designs for manufacturing methodology, assembly, and testing processes.
- Develop test equipment capabilities and continuous improvement in data acquisition software/hardware and pressure/flow mechanical equipment.
- Conduct VAVE tasks to derivative and existing products, ensuring manufacturing costs are minimised and cost targets are achieved working coherently with production Engineers.
Experience required for the Test Development Engineer:
- Mechanical Engineering Degree, Diploma, or equivalent qualification or experience.
- Demonstrable key skills in and knowledge around materials, stress analysis, and practical mechanical assembly.
- Practical skills and good working knowledge of precision manufacturing, CNC lathes, milling, and general Fabrication.
- Experience or knowledge of engineering software, 2D and 3D CAD, FEA, CFD, Mathcad, and MS Office, preferably using Autodesk platforms (AutoCAD, Inventor, ANSYS).
- Professional and effective communication skills, both verbal and written.
- Strong organisational skills as the role will involve working on various projects simultaneously, including coordinating with other project team members, liaising with manufacturing and sales departments, reviewing progress as well as evaluating results.
- Commitment to work to deadlines and determination to see a job through to a satisfactory conclusion.
- Knowledge of high-pressure valves for Nuclear, Oil, Gas and Space.
- Knowledge of electrical engineering and solenoid design.
Benefits for the Electronics Engineer Manager include:
- Flexible working Hybrid options
- Pension
- Competitive salary
This is a full-time permanent position for the successful. Test Development Engineer
For more information simply apply now or call Ian on 07734406996 or e-mail ian.broadhurst@holtengineering.co.uk....Read more...
Drainage Engineer
(Graduate or consultant level)
Sheffield - S35
Monday - Friday
Circa £35,000 per annum + Benefits
Are you a recent graduate or possess 2 years + in a Drainage Engineer position within an environmental consultancy background? If yes, read on .
My client is a renowned environmental consultancy firm, committed to providing innovative solutions to environmental challenges. Their team of growing and experienced professionals works collaboratively to deliver impactful projects across various sectors, with a focus on flood risk and drainage strategies.
The Role - Drainage Engineer
- Provide input into surface water/foul drainage strategies and highway design
- Provide input into technical reports and support the preparation of fee proposals
- Consult the water regulators, statutory authorities, and other stakeholders
- Prepare risk assessments, undertake site walkovers, and oversee CCTV or other
survey works
- Liaise and provide advice to clients and stakeholders
- Manage time and budgets under guidance from the line manager
Minimum Skills / Experience Required - Drainage Engineer
- Relevant degree (i.e. Engineering) and be motivated to gain Chartership (i.e. ICE,
CIWEM, etc).
- Familiar with drainage policy and guidance
- Familiar with drainage design software (Microdrainage, Causeway, CAD)
- Strong organisational and time management skills
- Ability to work with multidisciplinary teams, liaising with clients, and statutory
authorities
- Strong written and verbal communication skills
- A driving license is preferred
The Package - Drainage Engineer
- Starting salary up to £35,000 per annum but can depend on experience
- 24 days annual leave plus bank holidays - annual leave increases by one day for
every three years of service
- Healthcare scheme
- Life Insurance (three times annual salary)
- Access to Wider Wallet Benefits scheme
- Paid professional subscriptions
- Employee referral scheme
- Pension scheme (4% employer contribution)
About Precision People
Precision People is a leading recruitment agency that specialises in sourcing top talent for Engineering, Technical, Sales and Senior Management roles across various industries. With a focus on precision and quality, their team of expert recruiters works tirelessly to match the best candidates with the right employers, ensuring that both parties benefit from a successful partnership.
Precision People has the expertise and resources to help you find the perfect role. With a deep understanding of the industry and a commitment to excellence, they have built a reputation for delivering exceptional results and exceeding their candidate's expectations.
Interested?
To apply for the Drainage Engineer position, here are your two options:
1. "This is the job for me! When can I start?" - Call now and lets talk through your experience. Ask for Mollie Todd on 0116 254 5411 between 8.30 am - 5.30 pm.
2. "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know.
PPDEL....Read more...
Civil Engineer
(Drainage engineer)
Consultant level to Senior
Sheffield - S35
Monday - Friday
Circa £45,000 per annum + Benefits
Are you a recent graduate or possess 3-5 years in a Drainage Engineer position within an environmental consultancy background? If yes, read on .
My client is a renowned environmental consultancy firm, committed to providing innovative solutions to environmental challenges. Their team of growing and experienced professionals works collaboratively to deliver impactful projects across various sectors, with a focus on flood risk and drainage strategies.
The Role - Drainage Engineer
- Provide input into surface water/foul drainage strategies and highway design
- Provide input into technical reports and support the preparation of fee proposals
- Consult the water regulators, statutory authorities, and other stakeholders
- Prepare risk assessments, undertake site walkovers, and oversee CCTV or other
survey works
- Liaise and provide advice to clients and stakeholders
- Manage time and budgets under guidance from the line manager
Minimum Skills / Experience Required - Civil Engineer
- Relevant degree is essential (i.e. Civil Engineering, Engineering) and be motivated to gain Chartership (i.e. ICE,
CIWEM, etc).
- Familiar with drainage policy and guidance
- Familiar with drainage design software (Microdrainage, Causeway, CAD)
- Strong organisational and time management skills
- Ability to work with multidisciplinary teams, liaising with clients, and statutory
authorities
- Strong written and verbal communication skills
- A driving license is preferred
The Package - Drainage Engineer
- Starting salary up to £35,000 per annum but can depend on experience
- 24 days annual leave plus bank holidays - annual leave increases by one day for
every three years of service
- Healthcare scheme
- Life Insurance (three times annual salary)
- Access to Wider Wallet Benefits scheme
- Paid professional subscriptions
- Employee referral scheme
- Pension scheme (4% employer contribution)
About Precision People
Precision People is a leading recruitment agency that specialises in sourcing top talent for Engineering, Technical, Sales and Senior Management roles across various industries. With a focus on precision and quality, their team of expert recruiters works tirelessly to match the best candidates with the right employers, ensuring that both parties benefit from a successful partnership.
Precision People has the expertise and resources to help you find the perfect role. With a deep understanding of the industry and a commitment to excellence, they have built a reputation for delivering exceptional results and exceeding their candidate's expectations.
Interested?
To apply for the Civil Engineer position, here are your two options:
1. "This is the job for me! When can I start?" - Call now and lets talk through your experience. Ask for Mollie Todd on 0116 254 5411 between 8.30 am - 5.30 pm.
2. "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know.
PPDEL....Read more...
Engineering Manager
Salary up to £75k (DOE)
As the engineering manager, you will be overseeing the engineering capacity of the organisation, supported by our highly skilled R&D team. You will be working to progress the companies hardware products, putting in place effective management processes to ensure the engineering department succeeds. This will entail both developing new products and improving the existing product range, as well as establishing good design and test practices. Your main responsibilities will be:
Key Responsibilities
- Management of all engineering projects and overall planning and strategy of the engineering department.
- Communication with stakeholders on the aims, objectives, timescales, and outcomes of engineering projects.
- Implementing best-practice processes for product design and testing, including FMEA.
- Redesigning existing products to deliver better performance, improve manufacturability and reduce cost.
- Creating new products and solutions to meet commercial requirements.
- PCB and Electronics design, prototyping, up-issuing and obsolescence handling.
- Ensuring correct change-control procedures are adhered to.
- Ensure all investigations and technical decisions are planned and documented effectively.
- Provide technical expertise to other areas of the business as required.
The Right Person
The ideal candidate for this job would be somebody who is proactive and driven, capable of leading reform and establishing good practice. The devices that are developed are complex measurement instruments deployed in difficult environments so a background in sensors or ingress protection would be beneficial. as well as having experience in the following areas:
- Masters degree or equivalent in Electronic Engineering, Mechatronic engineering or similar.
- 6+ years industry experience.
- 2+ years management experience, including projects and people.
- Good communication skills
- Design of low power mixed signal PCBs.
- Fault finding electronics, sensors, and embedded software.
- Design-for-manufacture.
- Design-for-test, FMEA, Six Sigma, or equivalent.
- Development from prototype through to manufacture.
- Technical writing and documentation.
- Change control and repository management.
- BoM creation and obsolescence.
- EMC compliance
The following skills would be beneficial to a good candidate, but are not essential to the role:
- Assembly and fabrication, including SMD soldering and re-work (e.g. for prototypes).
- Mechanical design.
- 3D CAD skills (e.g. SolidEdge)
- Sensor calibration and test automation.
- Rapid prototyping.
- Data analysis and strong numerical skills.
- Adherence to standards or certifications (e.g. BSI, ISO, CE)
Interested? Here are your three options
1. This is the job for me, I meet all the requirements Call now and lets talk through your experience. Ask for Jon Webster on between 8.30am 5.30pm
2. I think Im right for this position, but Im not sure about some of the detail Click apply now so I can read your CV and come back to you.
3. Im interested but need to know more about what this job can offer me email jon@precisionrecruitment.co.uk with your CV and questions and I will reply with more detail.
Precision are committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system.
PPTP....Read more...
Flood Risk Consultant
(Consultant to senior consultant)
Sheffield - S35
More experienced candidates could be based in Manchester
Monday - Friday
Circa £35,000 per annum + Benefits
Are you a Flood Risk Consultant with 2- 5 years experience in a position within an environmental consultancy background? If yes, read on .
My client is a renowned environmental consultancy firm, committed to providing innovative solutions to environmental challenges. Their team of growing and experienced professionals works collaboratively to deliver impactful projects across various sectors, with a focus on flood risk and drainage strategies.
The Role - Flood Risk Consultant
- Prepare risk assessments and undertake site walkovers, CCTV and other survey
works
- Prepare technical reports (i.e. Flood Risk Assessments, Drainage Strategies, ES
Chapters) and support the preparation of fee proposals
- Consult the water regulators, statutory authorities, and other stakeholders
- Liaise and provide advice to clients and stakeholders
- Manage time and budgets under guidance from the line manager
- Provide guidance and training for junior staff members
Minimum Skills / Experience Required - Flood Risk Consultant
- Familiar with Flood Risk and Drainage policy/guidance (England, Wales, and
Scotland)
- Experience preparing flood risk assessments/drainage strategies/water
environment ES chapters
- Familiar with drainage design software (Microdrainage, Causeway, GIS/CAD).
- Strong organisational and time management skills
- Ability to work with multidisciplinary teams, liaising with clients, and statutory
authorities
- Strong written and verbal communication skills
- A driving license is preferred
- Experience in water quality and nutrient neutrality is desired
- Being familiar with hydrological assessments and hydraulic modelling (i.e.- Flood
Modeller Pro, TUFLOW, ESTRY, HEC-RAS, FEH/REFH methodologies) would be
preferred
The Package - Flood Risk Consultant
- Starting salary up to £35,000 per annum but can depend on experience
- 24 days annual leave plus bank holidays - annual leave increases by one day for
every three years of service
- Healthcare scheme
- Life Insurance (three times annual salary)
- Access to Wider Wallet Benefits scheme
- Paid professional subscriptions
- Employee referral scheme
- Pension scheme (4% employer contribution)
About Precision People
Precision People is a leading recruitment agency that specialises in sourcing top talent for Engineering, Technical, Sales and Senior Management roles across various industries. With a focus on precision and quality, their team of expert recruiters works tirelessly to match the best candidates with the right employers, ensuring that both parties benefit from a successful partnership.
Precision People has the expertise and resources to help you find the perfect role. With a deep understanding of the industry and a commitment to excellence, they have built a reputation for delivering exceptional results and exceeding their candidate's expectations.
Interested?
To apply for the Flood Risk Consultant position, here are your two options:
- "This is the job for me! When can I start?" - Call now and lets talk through your experience. Ask for Mollie Todd on 0116 254 5411 between 8.30 am - 5.30 pm.
- "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know.
PPDEL....Read more...
AV TECHNICAL LEAD DESIGN GURU – This position will see you working for a specialist residential AV systems integrator who work on high end bespoke home automation and cutting-edge home cinema. The company are looking for a seasoned project manager who has an understanding of AV design and is looking to move away from project management and use their years of integration experience in a more design orientated position. The role will see you using your years of AV installation experience to help the AV design process. You will be tasked with bringing your understanding of the pit falls of rack design / layout along with cabling issues that arrive and use your AV technical acumen to help create with the design team bespoke flawless systems. You will work from the office / site and home projects are mainly based in London and the South East.
5+years of Crestron along with Lutron
Bespoke Custom Install into the high end residential market
An understand of AV Systems design (CAD)
Strong technical AV understanding
Able to think outside the box and bring new ideas to the table
Good understanding of cable and connectors
IT networking knowledge (Cisco, Draytek)
Access control BPT
Home Cinema audio and projection
If you now seek a new position where you can have a true impact in the design process then please send me your full technical AV asap.
YOU MUST BE LIVING IN THE UK AND ALLOWED TO WORK HERE LEGALLY AND SHOW A CLEARLY DEFINED SKILL SET WITHIN THE CV
AV A-V A/V AUDIO VISUAL AUDIO-VISUAL AUDIO/VISUAL AUDIOVISUAL CAD AUTOCAD CRESTRON HOME DALI LUTRON DESIGN NETWORK CISCO RUCKUS DRAYTEK CONFFIGURATION CEDIA KENT WI-FI WIFI ....Read more...
CNC Miller/Tool Maker BlackburnMonday-Friday£15-£18 p/h (Dependent on Experience)7am-4pmI am seeking an experienced CNC Miller/Toolmaker for a well-established Client in Blackburn.This is an exciting opportunity to join a business with a people focused culture, with little turnover. This role will involve a lot of one off and project work and therefore candidates need to have experience with taking engineering drawings to be machined.CNC Miller/ Tool Maker Requirements:
Time served with BTEC / ONC or equivalent in Engineering NVQ 3 in Mechanical Engineering
Ability to edit programmes and read engineering drawings 3 Years minimum CNC Milling experienceHAAS / Hartford / Doosan knowledgeCAD/CAM Programming (desirable)Experience with Fanuc controls
CNC Miller Duties Producing precision parts to within the specified tolerances First Principal Inspection using measuring technique (Micrometers, Vernier Calipers, Height Gauges etc.) Competency in interpreting engineering drawings and geometric tolerances Experience with working on small / medium / large parts Work to meet schedule adherence Experience of understanding of working to ISO9001 standards and to Quality Management Systems (QMS).Machining on 3/4 axis Milling Machines Reading drawings Setting Milling Machines Programming in Fanuc
Please contact clare.butler@winsearch.uk for more information.Winsearch acts as an employment agency for permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services. View our latest jobs today on our website http://www.winsearch.uk and follow us on LinkedIn.ManHOur clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!
The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https://www.gov.uk/browse/visas-immigration/eu-eea-swiss
Many Thanks....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Building Science Test Assemblies Intern will collaborate closely with the Director of Building Science and Building Science Lab to compile a historical list, develop a strategy for evaluating systems, and identify prior system testing. Additionally, engage with the marketing team to create a template showcasing highlighted systems and prepare a PowerPoint presentation to emphasize capabilities and past testing results
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Collaborate with the Director of Building Science and Building Science Lab. Establish a historical list of systems. Develop a strategy for evaluating systems that need assessment. Identify and highlight previous system testing. Work with the marketing team to create a template for showcasing systems. Prepare a PowerPoint presentation emphasizing capabilities and past testing
EDUCATION REQUIREMENT:
Students pursuing a bachelor's degree in Engineering, or a related field at an accredited college or university. Must be a rising sophomore, junior, or senior in good academic standing.
EXPERIENCE REQUIREMENT:
No prior experience is necessary, requires a propensity for learning, openness to training, and a continuous improvement mindset.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Demonstrated proficiency in utilizing Microsoft Office tools including Word, Excel, PowerPoint, Outlook, Teams, etc. CAD experience is preferred. Adept at conducting comprehensive research and analysis, with the capacity to explore extensive topics and distill substantial data into concise and pertinent summaries. Exceptional communication skills, both oral and written, to effectively convey ideas, analysis, and guidance to diverse areas within the business.
PHYSICAL DEMANDS:
The incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 10 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $18.00 and $21.50, depending upon the academic year and prior experience/internships with the company (i.e. returning interns). This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. All applicants must be available to work during the dates of the formal internship program which begins on June 3, 2024, and ends on August 8, 2024. Interns may work before and/or after the official program dates if desired and approved by the hiring manager.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
Senior Mechanical Design Engineer
Croydon
£45-£60 Per Hour + (Temp-Perm *optional*) + Onsite + Travel to Clients + ‘Immediate Start’
Jump into a highly motivated commercial team tackling small and large scale Design projects across London. Be a key player and help a company maintain a reputation as a leading provider of building design services. The role of a Senior Mechanical Design Engineer will enable you to take lead in an exciting and thriving industry.
You’ll be helping a specialist company in industry. Bring value to the table and be rewarded for your hard work and efforts. Hit the ground running as a Senior Mechanical Design Engineer and pave the way for an elite company dominating a rapid growth and dynamic market.
Your Role As Senior Mechanical Design Engineer Will Include:
*Taking Lead on Projects across Education, New Residential & Commercial Property*Undertake Designs through stages 1-6 *Provide project management & Admin support to Senior & Junior Staff *Monitor design team costs / Contract Admin / Surveys and Reports*Be accountable for programmes and budgets provided for all Projects.The ideal Senior Mechanical Design Engineer Will Have:
* Degree Mechanical Engineering / Building services * Knowledge of current Building Regulations / Renewable technologies / IES Thermal Modelling / SAPs/ SBEM Calculations/ EPC’s / BREEAM / GLA London Plan* Proficient experience using Revit MEP/AutoCAD* Demonstrable experience of a Senior Design Engineering * Be Commutable To Croydon and prepared to travel to meet clients (Must hold Full UK Driving licence)
For immediate consideration please call James on: 02038137942
Key words: Senior Mechanical Design Engineer, Mechanical Design Engineer, Design Engineer, CAD Engineer, AutoCAD Engineer, HVAC Engineer, Building Services Designer, Design Director, BIM, MEP Design Engineer, Building physics, Croydon, Sutton, Mitcham, Bromley, Epsom, Caterham, Kingston Upon Thams, Purley, Greater London, South London, London....Read more...
JOB DESCRIPTION
Job Title:
NEW PRODUCT DESIGN ENGINEER & LEADER
Location: Pleasant Prairie, WI
Department: Research & Development
Reports To: Chief Technology Officer of R&D
Direct Reports/Manages others: No
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry. We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
JOB PURPOSE:
New Product & Design Engineer/Leader will have the responsibility for design, development and testing of application of new product concepts for our new technology development and existing products. You will work closely with Marketing, Product Management, Manufacturing, and R&D to ensure that the designs meet market needs, cost targets, and production requirements.
RESPONSIBILITIES:
Work independently to initiate innovative and functional product designs and manage the design projects related to new product development across all Rust-Oleum product categories. Participate in research of internal and external voice of customer meetings, analyze customer needs and insights, and translate them into value-added design solutions. Design, prototype, and test product design to ensure quality, functionality, durability, manufacturability and correlate chemical and physical material to consumer application and use, cost, safety and environmental impact. Work closely with Marketing, Product Management, Manufacturing, and R&D teams to ensure that the designs meet/exceed market/product needs, cost targets, and production requirements. Identify and select materials and components to meet design objectives. Identify, assess and select potential 3rd party design and /or manufacturing partners, and act as our project manager liaison with selected firm(s), travel to production facilities to evaluate processes and ensure compliance and quality to the standards. Develop and perform competitive assessments and analyses Act as the \"thought and team leader' for the business regarding product delivery system and packaging design. Create and/or guide engineering drawings, specifications, tolerances for designs.
REQUIREMENTS:
Minimum of bachelor's degree in Material and Mechanical Engineering or other related fields. 5 or more years of hands-on experience in new product development and tooling design, prototyping, and testing of mechanical systems with proven track record of successful new product design and development, preferably in durable consumer markets Extensive knowledge of product design, materials selection and manufacturing processes and direct experience working with a broad array of materials, preferably for various wipes of tools and delivery systems for coatings, cleaners and other consumer and industrial products. Excellent working knowledge of Computer Aided Design modelling concepts and software proficient with 3D CAD software (SolidWorks) for 3D part modeling, drawing, and assembly creation of the mechanical components Experience working with tooling manufacturers both domestically and internationally. A passion for design, engineering, problem solving, with critical thinking and creativity. Ability to work effectively with a cross-functional team from project concept through commercialization. Strong project management, analytical and problem-solving skills including good special acuity for design. Excellent interpersonal, written, and verbal communication and presentation skills. Ability to travel as required.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package. We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum offers 9 paid holidays and one floating holiday per year. You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online!....Read more...
My clients in North Bucks have an immediate requirement for an NPI Engineer - Electronics.This role is commutable from Milton Keynes, Newport Pagnell, St. Neots, Biggleswade, Sandy, Bedford.My clients are a world leader in in the design, manufacture and continuous improvement of wireless condition monitoring solutions. Their technology is used in 35 countries in rail, construction and mining. More than 30,000 sensors were installed last year, helping users manage ground and structural movement, landslide risk, geotechnical behaviour, rail track movement and much more.Main Duties & Responsibilities:As NPI Engineer you will provide an administration link between the engineering, product management and operational disciplines, with specific focus on all activities associated with New Product Introductions.This role reports to the Quality Assurance Manager and there may be an occasional requirement for national travel, primarily to meet suppliers and customers and support product deployment.Responsibilities include, although are not limited to the following:• Work alongside the Head of Quality to manage allocated projects through a structured gated process from concept/quotation to production-handover.• Analyse and recommend improvements to all production processes and methods to facilitate cost reduction and quality improvement.• Ensure compliance to all ECO procedures and work instructions.• Maintain process to communicate all engineering changes to internal and external stakeholders.• Support of production line tooling and equipment to support manufacturing processes.• Own creation of new part numbers, BOM creations/structure and BOM costings.• Preparation of Control documents/work instructions and provide technical support to production departments when necessary.• With help of Quality Engineers, perform FEMA, PFMEA study to understand the Production process and improve production time.• Generate and issue Component Inspection report, FAIR reports and manage PPAP process (if applicable).Relevant Skills & Competencies:Successful candidates should be able to demonstrate the following relevant skills and competencies:• A self-starter with good facilitation skills.• Strong interpersonal skills with the ability to communicate effectively at all levels of the organisation and with customers and suppliers.• Strong analytical and problem-solving skills.• Ability to understand and communicate technical data and specifications.• Able to work well under pressure and meet tight deadlines.Relevant Knowledge & Experience:Candidates should assess their suitability against the following essential and/or desirable relevant knowledge and experience:Essential:• Degree qualified (or with equivalent experience) in an engineering discipline.• Strong, demonstrable background in Electronic Manufacturing.• Ability to manage project and coordinate project review meetings.• Interpretation of drawings (ASME and ISO) and GD&T, technical specifications, Gerber Files and product control documentation.• Excellent written and verbal communication skills, with fluency in written and spoken English.• Experience using 3D CAD software – SolidEdge preferred but others are acceptable too.• Good computer skills with competency in using MS Office suite and other software as necessary.Desirable:• Previous experience within Sensor manufacturing industry is an added advantage.• Experience working with projects in APQP/PPAP environment is preferred.• Use of PFMEA/DFMEA/Control plan tools and risk management techniques.• Awareness of measurement and calibration standards.• Competent user of Microsoft Office suite and Project.• Awareness / exposure to direct communication with OEM customers.Package:Salary to c£40k, negotiable for a candidate with extremely well matched skills & experience.Workplace Pension Scheme with matched employer contributions.Life Assurance scheme.Cycle to Work Scheme.Tech Purchase Scheme.Learning & Development scheme including a variety of training courses.To apply for this NPI Engineer - Electronics role in North Bucks please contact us ASAP!....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Senior Technical Specialist maintains core product line building code compliance, ensures new products and systems are code compliant, participates in internal product and system development teams, answers project-specific questions, reviews project drawings to make recommendations, works with third party testing facilities and is heavily involved in industry organizations that help shape industry standards.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Recommend and approve Product Line application policies within technical literature. Answers project-specific questions. Review project drawings and make recommendations. Coordinate 3rd party testing certification/approvals. Recommend project or product-specific testing, interpret results, and make recommendations based on findings. High level of understanding of testing methods/techniques for Laboratory/Field Testing. Present a comprehensive understanding of testing methods to confirm varying compatibility among materials. Develop and review of product literature, application instruction, and the maintenance and updating of field training manuals. Comprehensive understanding of applicable Building Code requirements related to EIFS and other types of façade systems. Write, review, and make recommendations for letters of installation and job parameters along with detailed drawings to help make the sale. Formally respond to inquiries in written form based on sound engineering judgement. Provide technical training to internal and external customers focused on façade systems, code requirements, test methods, and application of relevant Tremco systems. Effectively collaborate with internal and designated external customers. Assure product performance through reviewing and making recommendations for proper use and field application. Master assigned core product line technology to include writing policy. Actively able to train/mentor new employees. Demonstrate a high-level of critical thinking and problem-solving skills.
EDUCATION: Bachelor's degree in civil, structural, or architectural engineering required; High School Diploma or GED and 15+ years related experience required in lieu of college degree.
EXPERIENCE:
7+ years of civil, structural, mechanical engineering, architectural engineering, building envelope, building science, construction consulting, construction industry or similar experience. PE license Experience with the design of facade systems Experience with building codes and third-party testing Experience with component and cladding wind load calculations
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Experience with Auto CAD, Word, Excel, and Bluebeam preferred. Experience with hygrothermal modeling software preferred, but not required (WUFI, THERM, etc.) Ability to manage multiple priorities. Effective team player. Self-motivated. Excellent written and verbal communication skills. Ability to travel up to 10% in the North American region. Mentoring/Training.
PHYSICAL DEMANDS: The incumbent must be able to stand, walk, sit, use hands, reach, climb, kneel, talk, hear, taste/smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $99,222 and $124,027 plus a 20% bonus opportunity. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
My clients in North Bucks have an immediate requirement for an NPI Engineer - Electronics.This role is commutable from Milton Keynes, Newport Pagnell, St. Neots, Biggleswade, Sandy, Bedford.My clients are a world leader in in the design, manufacture and continuous improvement of wireless condition monitoring solutions. Their technology is used in 35 countries in rail, construction and mining. More than 30,000 sensors were installed last year, helping users manage ground and structural movement, landslide risk, geotechnical behaviour, rail track movement and much more.Main Duties & Responsibilities:As NPI Engineer you will provide an administration link between the engineering, product management and operational disciplines, with specific focus on all activities associated with New Product Introductions.This role reports to the Quality Assurance Manager and there may be an occasional requirement for national travel, primarily to meet suppliers and customers and support product deployment.Responsibilities include, although are not limited to the following:• Work alongside the Head of Quality to manage allocated projects through a structured gated process from concept/quotation to production-handover.• Analyse and recommend improvements to all production processes and methods to facilitate cost reduction and quality improvement.• Ensure compliance to all ECO procedures and work instructions.• Maintain process to communicate all engineering changes to internal and external stakeholders.• Support of production line tooling and equipment to support manufacturing processes.• Own creation of new part numbers, BOM creations/structure and BOM costings.• Preparation of Control documents/work instructions and provide technical support to production departments when necessary.• With help of Quality Engineers, perform FEMA, PFMEA study to understand the Production process and improve production time.• Generate and issue Component Inspection report, FAIR reports and manage PPAP process (if applicable).Relevant Skills & Competencies:Successful candidates should be able to demonstrate the following relevant skills and competencies:• A self-starter with good facilitation skills.• Strong interpersonal skills with the ability to communicate effectively at all levels of the organisation and with customers and suppliers.• Strong analytical and problem-solving skills.• Ability to understand and communicate technical data and specifications.• Able to work well under pressure and meet tight deadlines.Relevant Knowledge & Experience:Candidates should assess their suitability against the following essential and/or desirable relevant knowledge and experience:Essential:• Degree qualified (or with equivalent experience) in an engineering discipline.• Strong, demonstrable background in Electronic Manufacturing.• Ability to manage project and coordinate project review meetings.• Interpretation of drawings (ASME and ISO) and GD&T, technical specifications, Gerber Files and product control documentation.• Excellent written and verbal communication skills, with fluency in written and spoken English.• Experience using 3D CAD software – SolidEdge preferred but others are acceptable too.• Good computer skills with competency in using MS Office suite and other software as necessary.Desirable:• Previous experience within Sensor manufacturing industry is an added advantage.• Experience working with projects in APQP/PPAP environment is preferred.• Use of PFMEA/DFMEA/Control plan tools and risk management techniques.• Awareness of measurement and calibration standards.• Competent user of Microsoft Office suite and Project.• Awareness / exposure to direct communication with OEM customers.Package:Salary to c£40k, negotiable for a candidate with extremely well matched skills & experience.Workplace Pension Scheme with matched employer contributions.Life Assurance scheme.Cycle to Work Scheme.Tech Purchase Scheme.Learning & Development scheme including a variety of training courses.To apply for this NPI Engineer - Electronics role in North Bucks please contact us ASAP!....Read more...
Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. But we’re always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative but work well within a team.
The role
Fugro are seeking a Maintenance Engineer to be based at our waterfront office at Portchester, Hampshire. The department specialises in offshore geophysical seabed and sub-seabed surveying for the renewables, unexploded ordnance (UXO), nearshore and utilities sectors across north-west Europe. As a Maintenance Engineer you will be responsible for the maintenance and repair of mechanical and electrical equipment and systems within the Geophysical Department. The role will include mobilising and commissioning the systems onto survey vessels and supporting ongoing operations of the equipment. Tasks will include managing LOLER and calibration schedules of equipment, keeping repair logs, troubleshooting, repair and maintaining geophysical equipment on site and in the workshop as well as travelling to vessels to install, maintain and repair equipment. Supporting offshore staff remotely to assist with repairs. Communicating with suppliers and test centres to organise spares, repairs and testing. Managing associated administrative tasks.
Who we’re looking for:
Essential
5+ GCSEs and 2+ A-levels or equivalent level qualification.
Mechanical and/or Electrical skills and knowledge.
Excellent troubleshooting and problem-solving skills along with the ability to fault find, test, repair and interrogate geophysical systems.
Able to work flexible hours and to travel when required.
Previous experience in a similar role.
Good knowledge of English language, verbal and written.
Proficient in use of MS Office applications.
Desirable
Knowledge of electrical and hydraulic winch motors and motor control systems.
Working knowledge of, and ability to work to marine mechanical standards.
Able to design and modify mechanical and hydraulic systems, documents and schematics using CAD.
Be willing to go to sea for short durations.
What we offer:
Fugro provides a positive work environment as well as projects that will satisfy the most curious minds. We also offer great opportunities to stretch and develop yourself. By giving you the freedom to grow faster, we think you’ll be able to do what you do best, better. Which should help us to find fresh ways to get to know the earth better. We encourage you to be yourself at Fugro. So bring your energy and enthusiasm, your keen eye and can-do attitude. But bring your questions and opinions too. Because to be the world’s leading Geo-data specialist, we need the strength in depth that comes from a diverse, driven team.
Extensive career & training opportunities both nationally and internationally.
Competitive salary accompanied by an attractive package including car allowance, contributory pension scheme, life assurance and private medical insurance.
Flexible and hybrid working
25 days annual leave.
Benefits portal
Option to buy or sell up to 5 days annual leave.
Subsidised canteen/restaurant in Wallingford.
Opportunity to lease a discounted electric car.
Free parking.
Our view on diversity, equity, and inclusion
At Fugro, our people are our superpower. Their variety of viewpoints, experiences, knowledge and talents give us collective strength. Distinctive beliefs and diverse backgrounds are therefore welcome, but discrimination, harassment, inappropriate behaviour and unfair treatment are not. Everybody is to be well-supported and treated fairly. And everyone must be valued and have their voice heard. Crucially, we believe that getting this right brings a sense of belonging, of safety and acceptance, that makes us feel more connected to Fugro’s purpose ‘together create a safe and liveable world’ – and to each other
#LI-JM1
Apply for this ad Online!....Read more...
Catfoss Recruitment Ltd are currently in partnership with a cutting-edge technology company that is looking to recruit a Mechanical Engineer to their expanding team on a permanent basis.Building on more than two decades of science led research and development, our client designs and manufactures pioneering power generation technology.Mechanical Engineer – What we are looking forA mid-level to senior mechanical engineer within the process industry with a minimum of five years proven industry skills and work experience. You will join the Equipment Engineering department working on various process equipment packages for the production of renewable gases. Process equipment packages consist of various components coupled together to achieve a specified function within a process system (such as water purification, sea-water injection, desalination, crude oil distillation etc…)In order to maintain the functionality, performance and reliability of a process system, every component included in the Package (e.g. pump, compressor, valve, pressure vessel, electric motor, Instrument, control system, etc…) will need to be specified accordingly.Mechanical Engineer – ResponsibilitiesThe Package engineers’ main objective will be a complete ownership of these various multidisciplinary units/equipment procured to build the system and sub-system packages. Ensuring the units/equipment selected are verified, certified, qualified, meets all statutory obligations and are fit for purpose for the life expectancy of the packaged system based on the contractual agreement. The package unit engineer shall also prepare the right technical documentation (datasheets and specification) of equipment to support proposals, FEED, detailed engineering and prototype test rigs.Key interactions of the Package unit engineer are internally with project teams, procurement dept., compliance dept. quality dept. and other engineering disciplines. Externally with clients, vendors, suppliers and participate in bid clarification meetings.About YouMechanical Engineer – Knowledge and Experience• Bachelor’s or Master’s degree level or equivalent, in Mechanical Engineering• 5+ years’ working experience in handling Packages like Chemical process packages, Cooling Tower, Water treatment packages, Material handling system equipment, compressor packages• Competent with industry standards including ability to carry out calculations to BS, EN, ISO, ASME, API, etc…• Good understanding of ATEX directives, Pressure Equipment Directive (PED) and Machinery Directive• Ability to understand and review supplier documentation such as ITP’s FAT’s SAT’s, test reports and interpret mill certificate, product certification etc…• Solid experience of the design, selection and specification of all process system equipment i.e. pumps, vessels, heat exchangers, pipework, valves and fittings etc…• Ability to understand, interpret and produce engineering documentation i.e. P&ID’s, PFD’s, engineering drawings, performance graphs, datasheets, specifications• Excellent interpersonal, communication, report writing and presentation skills to convey technical information to a variety of audiences• Understanding of material selection for industrial applications• Ability to evaluate parts and processes for cost, efficiency and reliability improvements• Knowledge of Risk Analysis tools such as (FMEA DFMEA)• Understand safety, compliance, statutory and regulatory requirements.• Availability to travel internationally to site and vendors workshop• Capable of critical thinking with solid decision-making skills• Strong time management skills, including prioritisation management• Proficient with Microsoft suite of products, particularly ExcelHighly advantageous:• Preferably working experience is in oil and gas industry, chemical industry, industrial gases process plants industry• Achieved or working toward Chartered (CEng) status with relevant industry body• Capable user of 3D CAD software, ideally Solidworks• Ability to carry out FEA analysis using ANSYS Mechanical• Working knowledge of ISO 9001 Quality Management System• Awareness of EC&I requirements for packaged equipment and pump systems• Familiarity with a manufacturing environment including BOMs and MRP• Knowledge of engineering systems and processes i.e. change notes, NCR’s etc…Mechanical Engineer suitable previous job titles: Mechanical Process Engineer, Mechanical Package Engineer, Senior Mechanical EngineerDue to current high volumes of applications to our advertised jobs, we are unable to respond to every application. All successful candidates will be contacted as soon as possible.Please apply ASAP....Read more...
Catfoss Recruitment Ltd are currently in partnership with a cutting-edge technology company that is looking to recruit an Electrical Engineer to their expanding team on a permanent basis.Building on more than two decades of science led research and development, our client designs and manufactures pioneering power generation technology.What we are looking forYou will work in the Electrical, Instrumentation and Control team. The electrical engineer is in charge of the specifying right technical specification of power supply unit on Proposals, FEED and EPC Projects. Key interactions of the electrical engineer are internally with Project teams, Procurement, Compliance, Quality and others engineering disciplines, externally with Clients, Vendors, Suppliers.Responsibilities• Prepare the power electronics technical specification and hardware planning with respect to regional grid connection conditions and project requirements• Design and preparation of power supply unit specifications based on international design codes and standards (IEC, NE, ATEX, CE)• Develops electrical system architecture, electrical system requirements, electrical schematics, harness drawings, single line drawings and field wiring diagrams• Participate in new product development teams• The design and development of complex busbar and cable interconnections• Assist in the development of plant layout, to reflect electrical design considerations• Creating equipment specifications (transformers, rectifiers, switch boards)• Approval, checking and preparation of design/engineering documentation (e.g. cable schedules, single line diagrams, load schedules.)• Act as a technical authority on electrical issues• Creating Bills of Material/equipment lists and single line diagrams• Carrying out cable calculations• You play an essential role in risk assessments, which make a key contribution to the safety and quality of our products• Review engineering deliverables prepared by external engineering contractors• Conduct power supply unit technical analysis and final supplier selection based on quality, technical and commercial considerations (Bid review based on good engineering practice)• Managing of FEED, basic and detailed engineering phase and technical follow up ensuring proper communication with vendors• You manage budget, schedule and quality constraints, lead the determination of total cost of installation in cooperation with other disciplines and performing meetings with suppliers• Vendor document management within proposals phase and project executionAbout YouKnowledge and Experience• Bachelor’s or master’s degree level or equivalent, in Electrical Engineering• 5+ years of experience in electrical and hardware planning for process engineering (large-scale)• Extensive knowledge of the current European and North American standards and regulations in electrical engineering• Experience in the field of electrical protection concepts• Good command of technical documentation• Familiar with hardware planning using electrical CAD systems• Superior communication skills• Ability to manage projects and multi-task effectively• Excellent follow-through• Must be driven and self-motivated• Understand safety, compliance, statutory and regulatory requirements• European travel is essential in this role so you must have availability to travel internationally to site and vendors workshop• Capable of critical thinking with solid decision-making skills• Strong time management skills, including prioritisation management• Proficient with Microsoft suite of products, particularly ExcelHighly advantageous• Experience with hazardous area design and equipment selection – in accordance with ATEX standards (60079)• Additional technical know-how in SOEC, SMR, fuel cells, clean fuel, energy storage systems and/or chemical synthesis (e.g. ammonia, methanol) is a plus• Experience in chemical process engineering in EPC in carrying out Pre-FEED / FEED / Detailed engineering work• A deep and thorough understanding of codes, regulatory requirements of hydrogen industry practices• Knowledge of ATEX Directive and other legislation related to explosive atmospheres• Proven history within a design engineering background working with high power equipment• Knowledge of electrical installation design• Knowledge of wiring and schematics• Some knowledge of grid connection, HV requirements and design is also preferred• Knowledge of protection and coordination desirable• Knowledge of rectifier units desirable• Knowledge of EMC requirements and standards desirableElectrical Engineer previous suitable job titles: Senior Electrical Engineer, Principal Electrical Engineer, Lead Electrical Engineer, Electrical Design Engineer, Electrical Power Engineer, Chartered Electrical Engineer, Chartered EngineerPlease apply ASAPDue to current high volumes of applications to our advertised jobs, we are unable to respond to every application. All successful candidates will be contacted as soon as possible.....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The BIM Specialist is responsible for transforming conceptual layouts to fully installable models that fully integrate into wall system/panel projects and designs by creating structures, objects, and families. By leveraging a variety of three-dimensional computer assisted design modeling software, the BIM Specialist will support senior modelers and project teams and promote the best tools and system framework for each project with required configurations and deployments. May lead discipline specific BIM modeling content for design projects.
ESSENTIAL DUTIES & RESPONSIBILITIES: List the job's essential functions or key responsibilities from most important or time-consuming to least (daily, weekly, monthly, annually or another regular/irregular interval) Maintain and develop BIM-related content for the Texas Panel Plant. Create models using Autodesk Revit. Create project specific 2D and 3D drawings and models for project submittals, special projects, bid packages, and product manufacturing (i.e. panel tickets). Coordinate and assist with any addendum, request for information, change proposal requests and change orders; make necessary revisions to existing drawings. Prepare final drawings based on prior work examples and input from designers and/or engineers. Establish, implement, and maintain quality control procedures. Document BIM standards, processes, procedures, and workflows to ensure consistency and quality across projects. Identify and resolve clashes, conflicts, and discrepancies within BIM models to ensure smooth coordination between various disciplines. Collaborate across functions to ensure accurate and timely designs in accordance with established budgets and estimates. Prioritize all work in accordance with project deadlines. Maintain and improve knowledge of drafting techniques, standards, practices, and engineering procedures as well as new and emerging technologies and best practices impacting digital design to enhance productivity and efficiency as well as profits. Manage the implementation of supporting software applications for BIM and project delivery.
EDUCATION & EXPERIENCE:
Bachelor's Degree or similar in Design, CAD, Engineering, architecture, or related field. Minimum 2 years experience as a modelling practitioner working with project engineers or managers. Demonstrated knowledge, proficiency, and use of Autodesk tools and systems such as Civil3D, Revit, 3D Studio Max/Stingray, AutoCAD 2017 (or newer), AutoDesk 3DS Max (or newer) and InfraWorks.
OTHER SKILLS, ABILITIES & QUALIFICATIONS:
Demonstrated ability to develop BIM drawings from verbal instructions, preliminary layouts, sketches, and project standards. Dedication to personal professional growth and education. Knowledge and appreciation for best performance in model-based design (BIM) protocols, standards, and software (Revit, AutoCAD 2010, Autodesk 3DS MAX) Ability to read and work from architectural and other construction-related plans to produce structural construction documents. Proficient use of Microsoft Office programs (Excel, Word and PowerPoint) Ability to prioritize, meet deadlines, and manage multiple projects simultaneously. Self-motivated and quick learner with the ability to accept feedback. Effective communication and interpersonal skills for collaborating with multidisciplinary teams and clients. Ability to identify and resolve potential problems by timely gathering and analyzing information Demonstrate positive team attitude and interpersonal effectiveness. Ability to follow detailed procedures to ensure accuracy of work. Inclination to be a team player who shares key information with others involved in a project and with colleagues. Ability to set high standards and demonstrate excellence, ensuring quality in every aspect of work performed. Takes personal responsibility and ownership of one's work and self-initiates corrective action when needed.
PHYSICAL DEMANDS: Incumbent must be able to stand, sit, walk, use hands, reach, climb, talk, and hear.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $52,000 and $66,000 This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
CNC TurnerAshton-under-LyneDay shift or nights availableMon-Thurs 08:00-16:30 Fri 08:00-13:00Mon-Thurs 18:00-06:00 Overtime available CNC TurnerBenefitsCompany pension with a total weekly contribution of 8% (5% employee, 3% employer), and we also have a bonus system based around Health and Safety that pays £250 every 6 months for those who have qualified.CNC TurnerThe RoleYou will be expected to achieve high standards of quality, in line with targeted levels of output whilst working safely and maintaining full product traceability. You will be working as part of a team and you are expected to contribute to improving any working processes. You will be on CNC Turner or CNC Vertical Borers.CNC TurnerMain Responsibilities
Programme, set up tools and load materials onto CNC machine.Programme Fanuc control systemsUse CAD/CAM and CimcoCarry out machining.To measure components produced on machines and use inspection equipment to ensure that components are manufactured to drawing dimensions and measurementsRead, interpret and work from engineering drawings.Contribute in a team working environment.Contribute to continuous improvementMaintain safe and clean working environment by complying with procedures, rules and regulations.Complete quality documentation.Use computer equipment for data purposes.Work to lean theory.Observe and practice the 5S principles.
CNC TurnerThe Candidate
Experience in CNC Turning or CNC Vetical BorerBe proficient at programming, set up, operation and adjustment of tool and fixture offsets on CNC machine toolsDesirable to be a time served engineer (or have an equivalent qualification) but experience is fine.
Please contact Amy Laplace-McHugh at Winsearch UK for further details – amy.mchugh@winsearch.ukWinsearch acts as an employment agency for permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services.View our latest jobs today on our website http://www.winsearch.uk and follow us on LinkedIn.ManHKeywords : CNC Miller / CNC Turner / Vertical Boring / Horizontal Boring / Vertical borer / horizontal borer Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!
The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https://www.gov.uk/browse/visas-immigration/eu-eea-swiss
Many Thanks....Read more...
My client, a fast growing, innovative multi-disciplinary construction and building consultancy with a number of offices across the South of England is hiring!
Due to their continued and ongoing success they are looking to appoint a number of motivated Chartered Building Surveyors and a number of intermediate Building Surveyors, candidates who are looking to become Chartered or are already in the process of becoming Chartered.
Successful candidates will be required to act on behalf of both public and private sector clients across a complete range of projects.
Job Summary The role encompasses a mixture of traditional building surveying and project management across a variety of different sectors, including but not limited to education, social housing, local authority, property development, ministry of defence and conservation.
No one day will be the same and the successful candidate will be expected to work both as part of an experienced team of Building Surveyors as well as being entrusted to take sole responsibility for managing their own projects from inception through to completion.
Successful candidates will be relied upon to help promote the practice and continue to develop and maintain client relationships. Limited travel will be expected to be undertaken across the region to fulfil the requirements of the role and the diverse range of work.
The successful candidate will be expected to be proficient in the use of AutoCAD as well as having at least a basic understanding of professional services.
Job Summary
You will be required to undertake the following duties;
Preparing tender documentation comprising of schedule of works, NBS, Preliminaries and Material Workmanship Sections.
Producing CAD drawings/plans.
Overseeing tender procedures and evaluation of tenders.
Perform the duties of Contract Administrator using the JCT suite of contracts, including, preparation of instruction, certificates of payment and final accounts.
Managing contracts and controlling expenditure within budget and time.
Carry out the duties of Lead Designer for Building Surveying led projects.
Undertake Building and Condition Surveys.
Carry out inspections of construction works.
Write technical reports.
Write specifications of work.
Compile schedules of work.
Chair and minute meetings.
Current projects include extensions & refurbishment of Schools, Colleges, Universities and other Public Sector Buildings.
In order to be successful in this role the following will be essential:
Knowledge of Asbestos Management duties, H&S Legislation and CDM Regulations.
Experience in Management of small to medium sized projects, identifying building defects and preparing specifications.
Working knowledge of IT systems and software such as MS Project, Office & AutoCAD.
Work well within a team.
Knowledge of the JCT forms of contract.
You will also need a minimum of a degree in Building Surveying and/or an HNC/HND. You will be a Full Member of RICS, or you will be actively seeking to become RICS accredited.
Successful candidates need to be highly motivated, positive and assertive, driven to get results, you will need to be used to working to tight schedules, you will be highly organised and you will be an excellent communicator
You will also need a fully valid UK Driver’s License and be prepared to undertake DBS/Security Clearance as a prerequisite.
Benefits
• 25 days leave (rising to 27), plus bank holidays (you can also buy and sell up to 3 days holiday)• 5% Employer Pension Contribution• Healthcare Package• Life Insurance • Critical Illness Cover• Professional Training (CPD)• Professional Membership Fees• Employee Assistance Programme• Sick Pay Insurance• Maternity, Paternity and Adoption
This is an outstanding opportunity to join a forward thinking, innovative multi-disciplinary construction consultancy who provide a seamless and collaborative service to their clients and stakeholders. If you are a self-motivated and ambitious individual, we would love to hear from you!
KEYWORDS
Building Surveyor, Chartered Building Surveyor, APC, MRICS, Refurbishment, Client Management, Contract Administration, Tendering & Bids, AutoCAD
Please forward me your CV in word format and I will call you to discuss the opportunity and client in detail.
Please note that due to a high level of applications, we can only respond to applicants whose skills and qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.
Bowerford Associates Ltd is acting as an Employment Agency in relation to this vacancy.....Read more...
CNC MillerAshton-under-LyneDay shift or nights availableMon-Thurs 08:00-16:30 Fri 08:00-13:00Mon-Thurs 18:00-06:00 Overtime available CNC MillerBenefitsCompany pension with a total weekly contribution of 8% (5% employee, 3% employer), and we also have a bonus system based around Health and Safety that pays £250 every 6 months for those who have qualified.CNC MillerThe RoleYou will be expected to achieve high standards of quality, in line with targeted levels of output whilst working safely and maintaining full product traceability. You will be working as part of a team and you are expected to contribute to improving any working processes. You will be on CNC Milling or CNC Horizontal Borers.CNC MillerMain Responsibilities
Programme, set up tools and load materials onto CNC machine.Programme Fanuc, Heidenhain control systemsUse CAD/CAM and CimcoCarry out machining.To measure components produced on machines and use inspection equipment to ensure that components are manufactured to drawing dimensions and measurementsRead, interpret and work from engineering drawings.Contribute in a team working environment.Contribute to continuous improvementMaintain safe and clean working environment by complying with procedures, rules and regulations.Complete quality documentation.Use computer equipment for data purposes.Work to lean theory.Observe and practice the 5S principles.
CNC MillerThe Candidate
Experience in CNC Milling or CNC Horizontal BorerBe proficient at programming, set up, operation and adjustment of tool and fixture offsets on CNC machine toolsDesirable to be a time served engineer (or have an equivalent qualification) but experience is fine.
Please contact Amy Laplace-McHugh at Winsearch UK for further details – amy.mchugh@winsearch.ukWinsearch acts as an employment agency for permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services.View our latest jobs today on our website http://www.winsearch.uk and follow us on LinkedIn.ManHKeywords : CNC Miller / CNC Turner / Vertical Boring / Horizontal Boring / Vertical borer / horizontal borer Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!
The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https://www.gov.uk/browse/visas-immigration/eu-eea-swiss
Many Thanks....Read more...
Job Title: Project Manager - Windows and Doors
Location: Dublin:
Salary: Neg DOE
As a Project Manager you will be required to oversee a wide variety of projects, from private houses to commercial apartment blocks, from site survey and initial order through to final handover to the client/main contractor, ensuring that work is completed on time, within its budget and to the benefit of the company.
KEY RESPONSIBILITIES:
Monitor and report on issues concerning programmes as the projects proceeds.
Provide reports for monthly valuations & invoices in accordance with contract requirement.
Liaise with all suppliers ensuring that orders are placed on time to complete agreed programmes.
Liaise with Architects & Main Contractors to get approval and sign off of orders and schedules and filling out of all contracts documentation such as Sub Contracts, Health & Safety, Risk Assessment Method Statements.
Have experience at managing multiple sites, planning critical dates and organising installation.
Ensure that all non-budgeted costs are properly identified, classified, well documented and that the responsible parties are notified in a timely manner.
Provide support and direction to site staff, early recognition of possible critical deadlines, agreeing extra work to be done on a contract, should the need arise and helping to resolve any disputes which may occur.
KNOWLEDGE & EXPERIENCE REQUIREMENTS:
A third-level qualification in Project Management or other relevant discipline
Experience 2 years minimum
Microsoft Office and Excel experience essential
Knowledge of Auto CAD desirable.
Knowledg of the Window and Door industry
Ability to read and understand Architectural Drawings essential.
Be a team player but you also be able to use your own initiative and make your own decisions.
Understand all aspects of the contracting process and technical building
Have experience of Project Management with all aspects of the sector including; tenders, delivery, instillation, safety, site meetings and sign off.
Due to the urgency of this vacancy, it is not possible for our client at this time to consider anyone without the appropriate work permits, visas or sponsorship's already in place. Therefore, we are unable to consider candidates who do not have full authorisation to work in Ireland. Applications submitted without the necessary visa in place will not be considered.
If the position above is of interest to you and you would like to know more, please call 086 0405288 in complete confidence.
CS
....Read more...
JOB DESCRIPTION
I&C engineer and supported by I&C technician team. Responsible for the design and review of all I&C equipment and instruments for the Plant. Explore solutions to production problems or improve efficiency with maintenance and operators. Run experiments and tests to aid in the development of improved manufacturing procedures and processes, and become familiar with a variety of concepts, practices, and procedures. Work and coordinate activities with the other engineering disciplines, Process, Project and Environmental. Prepare, review and/or approve of instrument specification data sheets and submit purchase requisitions for approval. Prepare equipment lists, instrument index, I/O lists. Review process flow diagrams and piping and instrument diagrams (P&IDs). Meet with plant technical staff to discuss technical information and features. Ensure drawings, specifications, reports, and analyses meet scope, schedule, cost, and quality requirements. Participate in failure mode and effect analysis (FMEA) and Process Hazard analysis (PHA) to consider equipment, personnel, and environmental safety. Knowledge of capital approval process and project justification required. Be involved in the design and development of equipment and work procedures. Be responsible for preparing, maintaining, and updating process hazard analysis. Ensures necessary records are maintained and prepared according to established guidelines. Takes responsibility for I&C Engineering Change Management system. Coordinate and approve all sample submissions of new products and engineering changes through the Product Development Program. Assists in identifying the root causes of a problem and instituting corrective action such as changes to batch sheets, generation of Engineering Change Requests, changes in workstations, changes to inspection analyses and changes to process procedures. Provide recommendations to improve procedures that apply to quality and operations functions. Be responsible for the design and implementation of policies and procedures to ensure that quality standards are met during production. Review quality trends based on quality data system information and interaction with production personnel and participate in the generation and implementation of defect-reduction programs. Investigate quality improvement opportunities and complaints with Director, Plant Manager and Research and Development. Prepare for and represent the company during all ISO and related audits. Review all design drawings and changes, process procedures, test procedures, procurement documents, and inspection analyses to ensure that the divisions and customers quality requirements are met on assigned products, programs, areas, and functions. Provide support to maintenance and operation group including visual aids and inspection analyses.
EDUCATION AND/OR EXPERIENCE:
B.S. degree in Electrical or Computer Engineering. Preferred, 2+ years working in a Manufacturing environment, and/or training; or equivalent combination of education and experience. Electrical Schematic and panel layout design using CAD (preferably AutoCAD Electrical) experience. Experience in the design of programmable logic controllers (PLC) or distributed control system (DCS) based controls systems. Expertise in National Electrical Code requirements in industrial facilities and hazardous locations. Proven understanding of integrating instrumentation with data acquisition hardware. Proficiency with electrical diagnostic equipment. Familiar with industrial sensors and actuators; pressure, temperature, accelerometers, motor controllers, flow meters, relays, strain gauges, valves, and pumps. Strong technical and non-technical writing and verbal skills Able to work in the United States without sponsorship. Ability to read, analyze, and interpret complex documents and/or scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.
PHYSICAL DEMANDS
This job requires daily use of hands to finger, handle or feel, and daily talking and/or hearing. This job requires frequent walking, standing, sitting, reaching with hands and arms, and stooping, kneeling, crouching, or crawling. This job requires occasional climbing or balancing and tasking or smelling. This job requires frequent lifting of up to 10 lbs. This job has the following special vision requirements: Close vision (clear vision at 20 inches or less) Distance vision (clear vision at 20 feet or more) Color vision (ability to identify and distinguish colors) Peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point) Depth perception (three-dimensional vision, ability to judge distances and spatial relationships)
WORK ENVIRONMENT
This job requires exposure to the following environmental conditions: Daily exposure to fumes or airborne particles and toxic or caustic chemicals. Frequent exposure to working near moving mechanical parts. Occasional exposure to wet or humid conditions, working in high, precarious places, outdoor weather conditions, and risk of electrical shock. The noise level for this job is loud. This job is located at a Chemical Plant. Evaluate hazardous processes and chemicals such as caustic, ammonia, and solvent. Evaluating storage tank instrumentation (high places), Assisting maintenance in troubleshooting, replacing, cleaning, and redesigning equipment
Wages: From $88K to $120K per year.
This position is 15% bonus eligible.
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to: medical, dental, vision, life insurance, disability, vacation, 14 Paid Holidays, parental leave, 100% Education reimbursement, 401(k), employee stock purchase plan, and pension. Apply for this ad Online!....Read more...
