The Test Engineer is responsible for developing, executing and reporting Validation and Verification V and V assessment tests for technology manufacturing resources, fabrication and assembly. The Test Engineer contributes to the development and execution of V and V standards, evaluations and reporting for individual and comprehensive product testing programs.
Experience
Needs to be hands on
Very organized, good time management to ensure stuff happens within the project schedule and V&V group schedules
Technically strong to ensure tool is tested in a thorough way
Responsibilities and Duties
Contribute to the ongoing improvement or creation of procedures, processes and technologies associated with experiments, tests and the overall V&V methodology.
Assume responsibility for the creation, content, adoption and reporting of test plans and programs.
Assume responsibility for the assessment and optimization of test plans and programs with respect to coverage, efficiency and project risk reduction.
Optimize the effectiveness and efficiency of individual tests and broader product testing programs by applying and tailoring standard tests or creating specialized tests.
Employ techniques such as data acquisition, signal and noise analysis, significance studies, sample set optimization, confidence intervals, confidence levels and statistical analysis. Anticipate test failure modes and events. Engineer tests so as to record and provide effective investigative test data.
Contribute to analytical and investigative activities such as FMEA, Hazard Analysis and Risk Control, and RCA. Integrate these and associated methodologies into the development, execution and analysis of experiments and tests.
Execute experiments and tests or oversee their execution by technicians, as required. ....Read more...
The Test Engineer is responsible for developing, executing and reporting Validation and Verification V and V assessment tests for technology manufacturing resources, fabrication and assembly. The Test Engineer contributes to the development and execution of V and V standards, evaluations and reporting for individual and comprehensive product testing programs.
Experience
Needs to be hands on
Very organized, good time management to ensure stuff happens within the project schedule and V&V group schedules
Technically strong to ensure tool is tested in a thorough way
Responsibilities and Duties
Contribute to the ongoing improvement or creation of procedures, processes and technologies associated with experiments, tests and the overall V&V methodology.
Assume responsibility for the creation, content, adoption and reporting of test plans and programs.
Assume responsibility for the assessment and optimization of test plans and programs with respect to coverage, efficiency and project risk reduction.
Optimize the effectiveness and efficiency of individual tests and broader product testing programs by applying and tailoring standard tests or creating specialized tests.
Employ techniques such as data acquisition, signal and noise analysis, significance studies, sample set optimization, confidence intervals, confidence levels and statistical analysis. Anticipate test failure modes and events. Engineer tests so as to record and provide effective investigative test data.
Contribute to analytical and investigative activities such as FMEA, Hazard Analysis and Risk Control, and RCA. Integrate these and associated methodologies into the development, execution and analysis of experiments and tests.
Execute experiments and tests or oversee their execution by technicians, as required. ....Read more...
FPGA Design Engineer with DSP ideally radar system design experience maximising multiple FPGA???s. The ideal candidate will be at technical leadership level willing to unpack requirements, coach juniors, conduct design reviews and be hands on where needed to deliver working FPGA architecture that is easily implemented to a client environment.
Requirements
Hands on VHDL based FPGA Design experience to Senior or ideally Principal level.
Multiple FPGA architecture.
Digital Signal Processing, high speed, satellite communications, ideally radar experience.
Able to absorb, specify and champion high level requirements taking the time to appreciate and understand the application needs.
Responsibilities
Electronic design of advanced FPGAs, from requirements, preliminary specification, test, system certification to verified design implemented and running on target hardware.
Firmware
VHDL simulation, test bench design, implementation verification and debug using test equipment oscilloscopes, spectrum analysers, signal generators, etc.
FPGA and VHDL Design Reviews.
Masters, Bachelors or PhD in relevant area from a good university.....Read more...
FPGA Design Engineer with DSP ideally radar system design experience maximising multiple FPGA???s. The ideal candidate will be at technical leadership level willing to unpack requirements, coach juniors, conduct design reviews and be hands on where needed to deliver working FPGA architecture that is easily implemented to a client environment.
Requirements
Hands on VHDL based FPGA Design experience to Senior or ideally Principal level.
Multiple FPGA architecture.
Digital Signal Processing, high speed, satellite communications, ideally radar experience.
Able to absorb, specify and champion high level requirements taking the time to appreciate and understand the application needs.
Responsibilities
Electronic design of advanced FPGAs, from requirements, preliminary specification, test, system certification to verified design implemented and running on target hardware.
Firmware
VHDL simulation, test bench design, implementation verification and debug using test equipment oscilloscopes, spectrum analysers, signal generators, etc.
FPGA and VHDL Design Reviews.
Masters, Bachelors or PhD in relevant area from a good university.....Read more...
An exciting opportunity has arisen for an experienced Systems Engineering Team Lead to join a growing space organisation developing complex spacecraft and advanced space systems.
This is a senior technical leadership position combining systems engineering, technical delivery and people management. You will lead a team of systems engineers while remaining closely involved in the development and maturation of complex space systems, from early architecture and mission definition through to integration, verification and delivery.
Working closely with project managers, customers, suppliers and multidisciplinary engineering teams, you will help shape technical solutions, lead system-level trade-offs and ensure projects remain aligned with performance, cost and schedule requirements.
Key Responsibilities
- Lead and manage a team of approximately 68 systems engineers, supporting their development, workload and performance.
- Define mission concepts, system requirements, technical objectives and development profiles based on customer and stakeholder needs.
- Lead system-level architecture development and technical trade-off studies.
- Identify key technical drivers relating to system performance, risk, cost and schedule.
- Lead technical discussions and present trade-off analyses to engineering and project stakeholders.
- Manage requirements, design baselines and configuration/change management throughout the system lifecycle.
- Work closely with project managers, engineering leadership, customers and suppliers to achieve consensus on complex technical issues.
- Coordinate technical deliverables, risk mitigation activities and engineering priorities across multidisciplinary teams.
- Identify technical and resource requirements across current and future projects.
- Support recruitment, interviewing and onboarding of new systems engineering team members.
- Identify skills gaps and develop plans to support the professional development of engineers.
- Review and provide technical oversight of engineering outputs.
- Support the team with hands-on systems engineering activities where required.
About You
We are looking for an experienced systems engineer with a strong background in space or similarly complex engineering environments, who is ready to take the next step into a technical team leadership position.
You should have:
- 5+ years' experience in space systems engineering or a similarly complex engineering environment.
- A good understanding of the key subsystems and functions involved in a typical satellite mission.
- Strong experience with systems requirements definition, derivation and management.
- Experience with system validation, verification and delivery.
- The ability to conduct complex technical and programme-level trade-offs.
- Experience managing technical risk, scope, budget and schedule constraints.
- Confidence working with engineering simulations and outputs from aerospace engineering tools.
- Strong communication and stakeholder management skills, with the ability to explain complex technical subjects to both technical and non-technical audiences.
- The ability to work effectively across multidisciplinary engineering teams.
Desirable Experience
- 2+ years' experience managing or leading systems engineers.
- 8+ years' experience in space systems engineering or similarly complex systems.
- Broader knowledge of spacecraft engineering disciplines such as mechanical, thermal, mechanisms or GNC.
- Experience with satellite Assembly, Integration and Test (AIT).
- Experience supporting spacecraft or mission operations.
- Experience working on ESA or other institutional space programmes.
- Experience working across the full spacecraft development lifecycle.
Whats on Offer
- Hybrid working with flexible arrangements around core hours.
- Optional 9/75 working pattern.
- 25 days' annual leave, increasing with service, plus public holidays.
- Private healthcare.
- Life insurance and long-term sick pay.
- Relocation assistance may be available.
- Opportunities for professional development and career progression.
- Access to modern engineering and cleanroom facilities.
- Collaborative, international and technically driven working environment.
This is an excellent opportunity for an experienced Systems Engineer or Senior/Lead Systems Engineer looking to combine hands-on technical engineering with team leadership and strategic responsibility. You will have the opportunity to influence system architecture, develop engineering capability and lead a talented team working on technically challenging space missions from concept through to delivery.
TT....Read more...
Our client, a leading designer and manufacturer of life safety technology, are looking for an Electronics Engineer to join their team in Cambridge on a permanent basis.
This is an exciting opportunity to work on the design and development of high-reliability electronic products, taking ownership of projects throughout the full product lifecycle, from concept and prototyping through to certification and production.
Key responsibilities of the Electronics Engineer job based in Cambridge:
Design and develop analogue, mixed-signal and embedded electronic circuits for innovative products.
Perform circuit simulation, schematic capture and PCB layout using Altium Designer.
Develop prototypes, proof-of-concept designs and support board bring-up activities.
Define and execute design verification and validation (V&V) plans, including testing and performance validation.
Support New Product Introduction (NPI) activities and work closely with manufacturing partners.
Contribute to product architecture, design reviews and cost optimisation initiatives.
Investigate product failures, perform root cause analysis and implement corrective actions.
Support compliance and certification activities, preparing technical documentation where required.
Collaborate with multidisciplinary engineering teams including software, mechanical, manufacturing and compliance engineers.
Experience required for the Electronics Engineer job based in Cambridge:
Degree in Electronics Engineering, Electrical Engineering or a related discipline.
Experience in an electronics design and development environment.
Strong practical experience in analogue and mixed-signal electronic circuit design.
Proficiency with PCB design tools, ideally Altium Designer.
Experience in electronic prototyping, testing and debugging.
Good understanding of the complete electronic product development lifecycle.
Strong communication skills with the ability to work effectively within multidisciplinary teams.
If this Electronics Engineer job based in Cambridge could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816.....Read more...
An exciting opportunity has arisen for an experienced and motivated Systems Engineer to join a fast-growing organisation at the forefront of space technology and mission operations.
In this role, youll be involved in the full lifecycle of ground segment development, from conceptual design through to maintenance and operational support. Youll play a key role in developing the infrastructure and software on the ground that enable safe and reliable space missions.
Working closely with Mission, Systems, and Operations teams, this position offers the chance to contribute to cutting-edge space missions and participate directly in control centre activities. Its a fantastic opportunity to apply your technical expertise in a dynamic and collaborative environment where innovation and sustainability in space are core values.
Key Responsibilities
- Lead or support the development of ground systems including Mission Control, Mission Planning, and Ground Station Interface Systems.
- Derive and manage system requirements across the ground segment and its components.
- Act as Product Owner or Technical Officer with external suppliers and support internal development teams during system design and integration.
- Collaborate closely with Mission, Systems, and Operations teams to ensure technical alignment across disciplines.
- Follow Agile (SCRUM) methodologies to implement requirements and maintain project schedules.
- Produce and maintain high-quality technical documentation, including requirements, verification plans, test procedures, and reports.
- Conduct verification and validation activities, including system tests and simulation campaigns.
- Support the Operations team during mission activities and assist with maintenance and troubleshooting of ground systems.
Essential Skills
- Degree in Computer Science, Telecommunications, or a relevant engineering discipline.
- Minimum 3 years experience in ground systems engineering.
- Solid understanding of ground segment components and their interactions.
- Knowledge of space mission design and development processes.
- Experience in requirements engineering.
Desirable Skills
- Experience with Mission Control Systems (e.g., SCOS-2000).
- Knowledge of Automation Systems, Mission Planning, or Ground Station Communications.
- Experience working in Agile/Scrum environments.
- Familiarity with C++ and/or Java, Linux systems, and shell scripting.
Whats on Offer
- Flexible and hybrid working options
- 9/75 work pattern (optional)
- 25 days holiday (increasing with service) + bank holidays
- Private healthcare and life insurance
- Relocation and visa sponsorship (where applicable)
- State-of-the-art office and cleanroom facilities
- Supportive, international team culture and regular social events
TT....Read more...
The Test Engineer will join a Systems Engineering team critical in space thruster engine development. You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components. This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop. Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc. Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integrat....Read more...
Field Service Engineer – UPS & Critical Power Systems
Location: Phoenix, Arizona, USA
Our client is seeking an experienced Field Service Engineer – UPS & Critical Power Systems to join their growing team based in Phoenix, Arizona. This is an exciting opportunity for a skilled engineer with a strong background in Uninterruptible Power Supply (UPS) systems, critical power infrastructure, and power electronics to support customers across the United States.
The successful candidate will play a key role in the installation, commissioning, maintenance, troubleshooting, and repair of UPS systems and associated critical power equipment, ensuring maximum reliability and uptime for mission-critical applications.
Key Responsibilities:
Perform preventative maintenance, servicing, and emergency repairs on a wide range of UPS systems and critical power equipment.
Diagnose, troubleshoot, and rectify faults on UPS systems, battery systems, inverters, rectifiers, static switches, and power distribution equipment.
Carry out commissioning, start-up, testing, and system verification of new UPS installations
Conduct site surveys, system inspections, and performance assessments
Support customers during planned maintenance visits and emergency call-outs.
Candidate Requirements:
Minimum 4+ years' experience in a Field Service Engineer, UPS Engineer, Critical Power Engineer, or similar role.
Proven hands-on experience servicing, maintaining, commissioning, and fault-finding UPS systems from leading manufacturers.
Strong understanding of critical power infrastructure, power electronics, inverters, rectifiers, batteries, and IGBT-based power systems.
Experience carrying out electrical testing, diagnostics, and root cause analysis.
Valid driver's license and willingness to travel extensively.
This is a field-based position requiring regular travel throughout the United States. Candidates must be comfortable spending significant time on customer sites and travelling nationwide as required to support service, maintenance, commissioning, and emergency response activities.
If you have a strong background in UPS systems, renewable energy & critical power solutions, commissioning, servicing, and fault finding, and are looking for your next challenge, we'd love to hear from you.
Please send your CV to NDrain@redlinegroup.Com or call 07487 756328 to speak with Nick for more information.
....Read more...
An exciting opportunity has arisen for a Systems Project Engineer to join a high-performing engineering team delivering advanced aerospace systems within a regulated, safety-critical environment.
This role offers the chance to take ownership of small to medium projects or key elements of larger programmes, working across the full engineering lifecycle and collaborating with multidisciplinary teams and customers.
Key Responsibilities for the Systems Project Engineer
- Lead small to medium projects or support larger programmes, including new product development, proposals, and in-service upgrades
- Develop and manage engineering plans, ensuring milestones and deliverables are achieved
- Coordinate with cross-functional teams including engineering, safety, and airworthiness
- Act as a technical interface with customers, translating requirements into effective engineering solutions
- Contribute across the full systems engineering lifecycle (requirements, design, development, integration, verification, and qualification)
- Identify and manage technical risks and opportunities
- Ensure system integrity, configuration control, and design traceability throughout the lifecycle
- Support engineering change management
- Mentor junior engineers and apprentices where appropriate
- Work with leadership to ensure projects are effectively resourced and delivered
Skills & Experience required by the Systems Project Engineer
Essential:
- Degree in a relevant engineering discipline (or equivalent experience such as HNC/apprenticeship)
- Typically 5+ years experience in an engineering role
- Experience in one or more of the following areas:
- Mechanical or electro-mechanical systems
- Fluid systems
- Mechanisms or structures
- Systems/product development
- Strong understanding of the engineering lifecycle and design review processes
- Excellent communication skills with the ability to engage customers and internal stakeholders
- Proactive, solution-oriented mindset with strong problem-solving ability
Desirable:
- Experience with project planning and scheduling
- Previous exposure to engineering sign-off processes
- Background in aerospace, defence, or other safety-critical industries
Whats on Offer for the Systems Project Engineer
- Competitive salary and benefits package
- Opportunity to work on innovative, high-impact engineering projects
- Collaborative and supportive team environment
- Ongoing training and development opportunities
- Clear progression pathways within engineering and project leadership
- Strong focus on employee wellbeing and work-life balance
Please note:
This role involves working with ITAR-controlled technology, and successful applicants may be required to undergo additional screening as part of the recruitment process.
TT....Read more...
Our client, a global engineering business specialising in advanced aerospace systems and components, are looking for a Lead Electro-Mechanical Engineer in Gloucester to join their team on a permanent basis.
This is a senior technical role leading the definition, development and integration of complex electro-mechanical actuation and control systems across the full engineering lifecycle.
Key responsibilities of the Lead Electro-Mechanical Engineer job based in Gloucester:
Lead system-level requirements, architecture definition, integration and validation
Provide technical oversight of electro-mechanical actuation systems incorporating motors, braking systems, sensors, solenoids and control electronics
Lead multidisciplinary engineering teams and drive system-level technical decisions
Manage technical relationships with suppliers, reviewing designs, qualification evidence and technical changes
Define and lead system integration strategies and resolve complex system-level issues
Oversee verification, validation and certification activities against relevant aerospace and military standards
Lead technical reviews, risk assessments and system-level trade studies
Support production, flight test and in-service investigations, including root-cause analysis
Drive continuous improvement across systems engineering processes, tools and practices
Experience required for the Lead Electro-Mechanical Engineer job based in Gloucester:
Degree in Aerospace, Mechanical, Electrical, Mechatronics or Systems Engineering
Extensive experience with aerospace actuation systems or other high-integrity systems
Strong systems engineering experience covering architecture, integration, requirements and V&V
Experience using requirements management tools such as DOORS, Polarion or equivalent
Proven experience leading supplier technical activities and design reviews
Experience working to DO-178 and DO-254 requirements
Strong understanding of engineering drawings and interface specifications
Experience with modelling, simulation, MBSE/SysML or safety/reliability engineering desirable
Strong technical leadership, communication and problem-solving skills
UK national with the ability to attain BPSS and SC security clearance
If this Lead Electro-Mechanical Engineer job based in Gloucester could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816....Read more...
We are looking for a Senior Embedded Software Engineer to develop advanced, real-time software solutions for complex systems. You will be responsible for delivering software from initial concept through to fully verified solutions, working across the full development lifecycle.
Key Responsibilities
Design, develop, and maintain high-quality software using best engineering practices
Take ownership of software development from requirements through to verification and validation
Support and enhance existing software in line with evolving project and customer needs
Contribute to system architecture, design reviews, and technical decision-making
Collaborate with multidisciplinary teams including systems, hardware, and test engineers
Provide technical guidance and mentorship to junior engineers
Ensure software is developed in line with relevant standards and quality processes
Key Skills
Strong experience in C++ development (ideally modern C++)
Proven experience working across the full software development lifecycle
Experience with GUI UX or Human-Computer Interaction (HCI)
Knowledge of Python, PowerShell, or other scripting languages
Experience in real-time, embedded and safety-critical systems
Familiarity with version control, CI and CD, and software testing frameworks
Degree in Computer Science, Software Engineering, or a related discipline....Read more...
We are looking for a Senior Embedded Software Engineer to develop advanced, real-time software solutions for complex systems. You will be responsible for delivering software from initial concept through to fully verified solutions, working across the full development lifecycle.
Key Responsibilities
Design, develop, and maintain high-quality software using best engineering practices
Take ownership of software development from requirements through to verification and validation
Support and enhance existing software in line with evolving project and customer needs
Contribute to system architecture, design reviews, and technical decision-making
Collaborate with multidisciplinary teams including systems, hardware, and test engineers
Provide technical guidance and mentorship to junior engineers
Ensure software is developed in line with relevant standards and quality processes
Key Skills
Strong experience in C++ development (ideally modern C++)
Proven experience working across the full software development lifecycle
Experience with GUI UX or Human-Computer Interaction (HCI)
Knowledge of Python, PowerShell, or other scripting languages
Experience in real-time, embedded and safety-critical systems
Familiarity with version control, CI and CD, and software testing frameworks
Degree in Computer Science, Software Engineering, or a related discipline....Read more...
Excellent opportunity for a Senior Software Engineer to join an innovative technology company based in Surrey, developing advanced imaging and detector solutions for demanding scientific and industrial applications. This is a hands-on position offering the chance to work across the full product lifecycle, from software development and system integration through to testing, production support and continuous product improvement within a multidisciplinary engineering environment.
Key responsibilities for the Senior Software Engineer role based in Surrey, onsite:
Develop and maintain software applications using C#, .NET, C++, Qt and Python.
Design and implement APIs, communication protocols and data acquisition systems.
Develop automated testing solutions, verification systems and engineering tools.
Support software quality through code reviews, CI/CD processes and release management.
Investigate and resolve complex issues spanning software, firmware, FPGA and hardware interfaces.
Develop SQL queries, reporting solutions and system integrations to support engineering and business processes.
Provide technical leadership and guidance to junior engineers.
Manage multiple development projects while ensuring high-quality delivery.
Key skills required for the Senior Software Engineer role based in Surrey, onsite:
Degree qualified in Software Engineering, Computer Science or a related discipline.
Demonstratable commercial experience in a Senior Software Engineer or similar position.
Strong commercial experience with C# and .NET development.
Experience developing software using C++ and Python.
Knowledge of API development and software integration.
Experience with test automation, source control and CI/CD environments.
Ability to work effectively within multidisciplinary engineering teams.
Any experience with scientific instrumentation, imaging systems, electronics, FPGA or hardware-integrated software would be advantageous.
This is an exciting opportunity to join a highly technical engineering team where you will play a key role in the development of innovative products, working on complex software and hardware integration challenges whilst influencing future technology development.
APPLY NOW! To apply for the Senior Software Engineer role based in Surrey, please send your CV to mbelmar@redlinegroup.Com or contact Mike Belmar on 01582 878807 for further information.....Read more...
Are you an Electronic Service & Repair Engineer with hands-on electronics repair, calibration and diagnostic experience?
My client, based in Kent, is looking for an Electronic Service & Repair Engineer to join their growing service team. They are a specialist in advanced imaging and sensing solutions, designing and manufacturing thermal imaging, infrared camera and sensor systems used across defence, security, industrial inspection and public safety applications.
The role is site-based, with occasional travel, in Kent and will involve working as part of a collaborative service organisation responsible for the evaluation, failure diagnosis, repair, calibration and adjustment of thermal imaging products and systems.
Responsibilities for the Electronic Service & Repair Engineer based in Kent:
Evaluate, diagnose, repair, calibrate and adjust thermal imaging products, infrared cameras and associated sensor systems.
Use knowledge of electronic theory, thermography and optics to complete daily service, fault-finding and technical support activities.
Work closely with Customer Service, the Service Manager and wider technical teams, providing timely updates and clear progress reports.
Engage with customers where needed to explain complex technical issues, service findings and proposed repair solutions.
Operate hand tools and electronic test equipment to support product evaluation, repair, calibration and verification.
Perform software and firmware updates on camera products, using computer systems and embedded programming knowledge where appropriate.
Skills and requirements for the Electronic Service & Repair Engineer based in Kent:
Qualification in electronics, engineering or equivalent practical experience.
Hands-on experience in electronics repair, assembly, service or calibration.
Ability to operate electronic test equipment and confidently navigate computer operating systems.
Understanding of metrology principles, calibration processes and laboratory operations.
Experience with thermography, optics, SAP PR1, Oracle ticketing systems, embedded programming or camera products would be beneficial.
Able to work at a bench and from a standing position, with the ability to lift objects weighing up to 40 lbs from time to time.
Eligibility to apply for and obtain the appropriate export control licence where required.
This is a fantastic opportunity for the Electronic Service & Repair Engineer based in Kent to join an innovative technology business offering technical challenge, professional development and the chance to work on advanced imaging and sensing products.
To apply for the Service Engineer role, please send your CV to KGraveney@redlinegroup.Com or call on 01582878817
....Read more...
Senior Design Engineer
Norwich
£45,000 – £95,000 Basic + Bonus + Technical Progression + Training + Long-Term Stability + Monday–Friday + Pension + Holiday
Grasp the opportunity to join a growing and technically advanced engineering business where you will be given full technical training and genuine opportunities to develop your skills and progress your career. This is an excellent opportunity for an Senior Design Engineer looking for a stable, long-term position where you can work on technically challenging projects, broaden your engineering knowledge and become a highly skilled specialist within your field.
As a senior design engineer, you will be joining an experienced and supportive engineering team, working on bespoke electrical, control and automation systems while receiving ongoing training and development throughout your career. With a varied workload, strong project pipeline and opportunities to take on greater technical responsibility, this role offers excellent job satisfaction, long-term stability and the chance to build a rewarding career within a company that genuinely invests in its engineers.
The Role of the Electrical Design Engineer Will Include:
Producing detailed electrical designs and engineering drawings for control and automation systems
Creating electrical schematics, wiring diagrams and control panel designs
Working closely with controls, software, instrumentation and project engineers
Selecting electrical components and ensuring designs meet relevant engineering standards
Commutable to the Norwich site
The Successful Electrical Design Engineer Will Have:
Previous experience within Electrical Design within Automation or Control Systems
HNC, HND or Degree in Electrical Engineering or a related discipline
Experience using electrical CAD software such as AutoCAD Electrical, EPLAN or similar
Experience as a senior design engineer or keen to emerge into this role
Background working with industrial machinery, production equipment or similar
Ability to lead projects and support or mentor junior engineers
Commutable to the office in Norwich
Call 07458 163046 and ask for Rebecka Van Ristell for more information ?
Keywords: Electrical Design Engineer, Electrical Design, Electrical Engineer, Electrical Design Engineer, Design Engineer, Control Panel Design Engineer, Electrical Controls Engineer, Controls Engineer, Control Systems Engineer, Automation Engineer, Automation Design Engineer, E&I Engineer, Electrical and Instrumentation Engineer, Control Systems, Automation, Industrial Automation, Electrical Schematics, Electrical Drawings, Wiring Diagrams, Control Panels, MCC Panels, Switchgear, LV Panels, Distribution Boards, Panel Design, Panel Building, Electrical Components, Cable Schedules, Cable Calculations, Termination Drawings, Bills of Materials, BOM, AutoCAD, AutoCAD Electrical, EPLAN, SolidWorks Electrical, Electrical CAD, PLC, HMI, SCADA, Instrumentation, Control Systems, Safety Systems, Functional Safety, SIL, Siemens, Allen Bradley, Rockwell Automation, Schneider Electric, ABB, Mitsubishi, Omron, Industrial Controls, Process Control, Commissioning, Installation, Testing, Design Verification, Engineering Documentation, Electrical Engineering, Control Engineering, Automation Engineering, Manufacturing, Industrial, Energy, Utilities, Renewables, Oil & Gas, Nuclear, Chemical, Pharmaceutical, Food Manufacturing, Norwich, Norfolk, East Anglia, Norfolk, Suffolk, Cambridgeshire, Cambridge, Ipswich, Bury St Edmunds, Thetford, Dereham, Wymondham, Great Yarmouth, Lowestoft, King's Lynn, Peterborough, Colchester
This vacancy is being advertised by Future Engineering Recruitment Ltd, an Employment Agency. All applicants must have the legal right to work in the United Kingdom. Unfortunately, applications from individuals without valid UK work permission cannot be processed.....Read more...
Join our leading International Aerospace and Defence company. We are seeking a highly skilled Senior Systems Engineer to play a critical role in supporting our current engine development program. This is an exciting opportunity to contribute to the development of a complex, multifaceted rocket engine system composed of numerous components.
Key Responsibilities
Manage the Design, Verification, and Compliance Matrix at a top level.
Oversee the overall engine system architecture, including
System level analysis FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, etc.
Documentation Design, Design Justification Document, Software Requirements Specification, Engine Test Plan, etc.
Collaborate with the Project Manager to plan and organise project tasks and resources.
Support the engine system build, assembly, and test development process by reviewing route cards, build sequences, and integration processes.
Key Requirements
Master???s degree in engineering Aerospace, Mechanical, or Electrical engineering preferred.
Minimum of 5 years of experience in complex product development within the industry.
Proven track record as a technical leader with clear communication skills, leading large multidisciplinary and multicultural engineering teams.
Understanding of Electrical or Harnessing Design, routing, and schematic.
Proficiency in System Thermal Equipment design and selection.
Knowledge of System Analysis, including but not limited to: Fluidic Analysis, Performance Analysis, Thermal Analysis, Radiation Assessment, Failure Modes Effects and Criticality Analysis or FMECA.....Read more...
Join our leading International Aerospace and Defence company. We are seeking a highly skilled Senior Systems Engineer to play a critical role in supporting our current engine development program. This is an exciting opportunity to contribute to the development of a complex, multifaceted rocket engine system composed of numerous components.
Key Responsibilities
Manage the Design, Verification, and Compliance Matrix at a top level.
Oversee the overall engine system architecture, including
System level analysis FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, etc.
Documentation Design, Design Justification Document, Software Requirements Specification, Engine Test Plan, etc.
Collaborate with the Project Manager to plan and organise project tasks and resources.
Support the engine system build, assembly, and test development process by reviewing route cards, build sequences, and integration processes.
Key Requirements
Master???s degree in engineering Aerospace, Mechanical, or Electrical engineering preferred.
Minimum of 5 years of experience in complex product development within the industry.
Proven track record as a technical leader with clear communication skills, leading large multidisciplinary and multicultural engineering teams.
Understanding of Electrical or Harnessing Design, routing, and schematic.
Proficiency in System Thermal Equipment design and selection.
Knowledge of System Analysis, including but not limited to: Fluidic Analysis, Performance Analysis, Thermal Analysis, Radiation Assessment, Failure Modes Effects and Criticality Analysis or FMECA.....Read more...
Excellent opportunity for a Senior FPGA Engineer – Compute Architecture & Hardware Acceleration to join an innovative technology business on a hybrid basis, with time spent at their Oxford site, helping develop next-generation probabilistic computing platforms and advanced hardware acceleration solutions. This role will require expertise in FPGA design, algorithm implementation, and high-speed digital systems development.
Key responsibilities for the Senior FPGA Engineer – Compute Architecture & Hardware Acceleration role (hybrid and Oxford based):
Translate complex probabilistic algorithms from Python, C++, MATLAB and pseudocode into highly pipelined, resource-efficient FPGA RTL designs
Design and implement custom digital logic in VHDL from scratch where vendor IP is unsuitable, introduces latency or creates bottlenecks
Architect and integrate high-speed data acquisition pipelines utilising ultra-fast ADCs, PCIe, high-speed Ethernet and transceiver technologies
Work closely with hardware engineers, software developers, researchers and ASIC architects to define system architecture and technical solutions
Develop robust verification environments, perform hardware bring-up activities and optimise timing, power and resource utilisation across multiple clock domains
Key skills required for the Senior FPGA Engineer – Compute Architecture & Hardware Acceleration role:
Degree in Electrical Engineering, Computer Engineering or a related discipline
Demonstrable experience of FPGA digital design experience developing complex, high-speed digital systems
Strong HDL expertise with a proven ability to develop custom RTL from scratch
Experience with FPGA SoC platforms, including practical knowledge of processor-side development and PS/PL architectures such as Zynq
Proven ability to translate mathematical or algorithmic models into hardware accelerators using fixed-point arithmetic and bit-accurate modelling techniques
Strong understanding of timing closure, clock domain crossing (CDC) and advanced digital design principles
Experience with Xilinx Vivado, Vitis and TCL scripting toolchains
Familiarity with hardware debugging tools including oscilloscopes, logic analysers, JTAG debuggers and signal generators
This is an opportunity to work at the forefront of probabilistic computing, helping define the hardware architecture for a revolutionary computing platform while collaborating with leading experts and researchers in the field.
APPLY NOW! To apply for the Senior FPGA Engineer – Compute Architecture & Hardware Acceleration role (hybrid and Oxford based), please send your CV to mbelmar@redlinegroup.Com, or for more information contact Mike Belmar on 01582 878807.....Read more...
We are seeking a talented and motivated Flight Dynamics Engineer to join a growing engineering team developing advanced flight dynamics capabilities for defence and space applications. This role offers the opportunity to contribute to the design and evolution of sophisticated software products supporting space domain awareness, mission analysis, and space operations.
Working within a multidisciplinary engineering environment, you will help develop innovative flight dynamics solutions, influence product direction, and collaborate with technical specialists to deliver high-quality software and services that meet evolving customer requirements.
This is an excellent opportunity for someone who enjoys solving complex technical challenges, working closely with customers, and contributing to advanced space programmes within an Agile software development environment.
Key Responsibilities
- Design, develop, validate and maintain flight dynamics software for defence and space applications.
- Support business development activities by providing technical expertise during bids and customer engagements.
- Develop and specify flight dynamics algorithms to support operational software capabilities.
- Review flight dynamics designs, procedures and technical documentation.
- Capture, analyse and refine customer and system requirements, translating them into user stories and technical specifications.
- Help prioritise and define features for future software releases.
- Support system verification, validation, integration and simulation activities.
- Provide technical support to operations teams, troubleshooting issues and recommending best practice.
- Act as the technical interface with external suppliers and development partners where required.
- Work within an Agile (Scrum) environment to deliver software to agreed schedules.
- Produce and maintain high-quality engineering documentation, including requirements, verification plans, test procedures and technical reports.
Essential Experience
- Master's degree in Astronautics, Aerospace Engineering, Physics or a related discipline (or equivalent experience).
- At least five years' commercial experience in flight dynamics within the space or defence sectors.
- Eligible to obtain UK Security Clearance (SC) or higher.
- Strong understanding of orbital mechanics and spacecraft flight dynamics.
- Experience with mission analysis and trajectory design.
- Experience using MATLAB or equivalent simulation tools.
- Strong Python programming skills.
- Experience defining and managing technical requirements.
- Understanding of the full software development lifecycle, including design, development, integration, testing and maintenance.
- Experience working alongside spacecraft operations or mission operations teams.
- Excellent written and verbal communication skills in English.
Desirable Experience
- Knowledge of ECSS standards.
- Commercial software engineering experience.
- Experience with commercial flight dynamics software tools.
- Familiarity with Linux operating systems.
- Working knowledge of Microsoft Windows and Office applications.
What\'s on Offer
- Hybrid and flexible working arrangements including 9/75 work pattern.
- Opportunity to work on challenging space and defence programmes using advanced technologies.
- Collaborative, supportive engineering environment.
- Career development and training opportunities.
- Private healthcare.
- Life assurance and long-term sickness cover.
- Generous annual leave entitlement plus public holidays.
- Relocation assistance may be available.
- Modern office facilities and regular team social events.
If you're passionate about orbital mechanics, spacecraft operations and developing software that supports the future of space and defence, we'd like to hear from you.
TT....Read more...
Regulatory Affairs Engineer – Medical Devices - Cambridge
A leading technology and product development organisation in Cambridge is seeking a Regulatory Affairs Engineer to support a diverse portfolio of complex engineering projects. Working at the intersection of design, innovation and compliance, you will partner closely with design engineers, scientists and project teams to ensure that every development pathway is grounded in robust regulatory thinking. The work is fast‑paced, technically varied and highly collaborative, giving you the opportunity to influence breakthrough technologies across both medical and non‑medical sectors.
You will join a quality and regulatory function that is deeply embedded within engineering activity. Rather than operating as a separate review layer, this team works directly alongside designers and technical specialists, providing practical regulatory guidance that shapes product architecture, design decisions and verification strategies from the earliest concept stages. Their involvement ensures that development processes remain aligned with international standards and that clients receive the confidence expected from a world‑class engineering partner.
In this role, you will deliver hands‑on regulatory support across multiple projects, contributing to the operation and continuous improvement of the quality management system while enabling engineering teams to progress efficiently. You will apply your knowledge of standards such as ISO 9001, ISO 13485 and FDA 21 CFR 820 to help teams interpret requirements, manage design controls and navigate compliance considerations without compromising innovation. The breadth of project exposure will allow you to deepen your regulatory engineering expertise across a wide range of technologies and market areas.
A key part of your work will involve tracking changes in international regulations and standards, assessing their impact on ongoing development activities, and communicating clear, actionable guidance to engineering colleagues. You will support internal improvement initiatives, contribute to external audit preparation, and help maintain quality and regulatory processes that are both rigorous and practical for real‑world product development. This position requires someone who can combine structured regulatory thinking with the creativity needed to support engineering problem‑solving, offering pragmatic solutions that work in commercial environments.
To succeed, you will need strong communication skills and the ability to build effective relationships with design engineers and multidisciplinary teams. You should be able to demonstrate experience in developing or contributing to regulatory strategies, interpreting technical requirements, and understanding how regulatory considerations influence design, verification and downstream processes. Experience within the medical device sector will be particularly valuable.
You will be expected to hold a relevant engineering or scientific degree and have contributed to the development of a medical device from early design stages through to release, giving you a clear understanding of the full lifecycle and the regulatory engineering considerations at each phase.
This is an excellent opportunity to join a forward‑thinking organisation where you can expand your regulatory engineering expertise, contribute to meaningful innovation and play a key role in shaping how new technologies reach the market.
If you have regulatory engineering experience and are looking for a challenging and rewarding role within a growing organisation, then apply now. I expect strong interest in this position, and the company is looking to move quickly, so I would recommend submitting your application immediately or risk missing out. For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and DeepTech recruitment at Newton Colmore, on +44 121 268 2240, or make an application and one of our team will be in touch.
....Read more...
An opportunity has arisen for a Configuration Management Engineer to support the development of mission-critical electro-mechanical and pneumatic systems used on advanced airborne platforms. This role sits within a highly regulated, safety-critical environment supporting complex aerospace programmes across the full engineering lifecycle.
You will work closely with multidisciplinary delivery teams, ensuring robust configuration and data management processes are embedded from requirements definition through to verification and audit.
As a Configuration Engineer, you will be responsible for discharging the five key Configuration Management activities across delivery teams and programme lifecycle phases. You will provide clear direction on CM and Data Management processes and tools, covering system requirements, hardware, software and modelling environments.
Key Responsibilities
- Drive a proactive Configuration and Data Management approach across engineering teams
- Deliver agreed work packages to cost and schedule constraints
- Develop, review and execute Configuration Management Plans
- Configuration Identification across system, software and hardware artefacts
- Change Control analyse proposed design changes for system-level impact
- Co-chair and operate Change Control Boards
- Provide Configuration Status Accounting and manage configuration baselines
- Conduct Functional and Physical Configuration Audits
- Ensure project datasets remain controlled and aligned with programme governance
- Manage release, submission and tracking of contract and supplier data
What Were Looking For
- Strong understanding of Configuration Management aligned to DEF STAN 05-57 and EIA-649A-1
- Practical experience across the five CM pillars
- Experience within safety-critical product development environments
- Data Management experience supporting contractual and supplier deliverables
- Excellent organisational skills with strong attention to detail
- Logical, structured mindset with the ability to influence delivery teams
- Degree with 4+ years relevant experience (or 10+ years equivalent industry experience)
- Ability to interface confidently across engineering functions and occasionally with customers
Working Environment
You will join a dynamic aerospace engineering environment focused on the design, manufacture and test of high-performance airborne systems. The organisation supports advanced platforms worldwide and operates within a structured, quality-driven framework typical of regulated defence and aerospace programmes.
Benefits
- Half-day finish on Fridays
- Hybrid & flexible work options
- 25 days annual leave (plus bank holidays), increasing with service
- Option to buy/sell up to 5 days annual leave
- Private medical insurance (optional family cover)
- Pension scheme with up to 8% employer contribution
- Life assurance and group income protection
- Flexible benefits package (health cash plan, dental insurance, gym membership, EV scheme, cycle to work, critical illness cover)
- Employee assistance programme (mental health & wellbeing support)
- Professional membership reimbursement (discretionary)....Read more...
An exciting opportunity has arisen for a Senior Mission Operations Preparation Engineer to join an innovative space technology organisation working on the development and operation of next-generation satellite missions.
This role is ideal for an experienced spacecraft operations or systems engineer who enjoys working at the intersection of engineering, mission design, and operational delivery. You will play a key role in ensuring spacecraft and ground systems are ready for successful mission execution, working closely with teams across software, systems, AIT, and flight operations.
You will be involved throughout the mission lifecycle, helping to define operational strategies, develop procedures and tools, support testing activities, and prepare teams for spacecraft operations.
This is a highly collaborative role suited to someone who is technically curious, enjoys solving complex engineering challenges, and wants to make a tangible contribution to ambitious space missions.
Visa sponsorship and relocation support available for suitable candidates.
Key Responsibilities
- Lead operational engineering activities for spacecraft missions during development and preparation phases.
- Translate mission and spacecraft requirements into practical operational concepts and solutions.
- Work closely with engineering teams to ensure spacecraft designs are operable and support successful mission delivery.
- Develop and maintain operational documentation, procedures, and supporting materials.
- Support spacecraft simulator activities, mission databases, and operational tooling.
- Contribute to system-level testing, validation campaigns, and mission readiness activities.
- Help define and improve processes, tools, and approaches used to support spacecraft operations.
- Collaborate with flight operations teams during mission preparation and execution phases.
- Provide technical support during spacecraft operations, including anomaly investigations where required.
What Were Looking For
- A degree in Engineering, Physics, or another relevant technical discipline.
- Strong experience within the satellite or space industry, ideally across spacecraft operations, mission preparation, or systems engineering.
- Understanding of spacecraft operational concepts and the complete mission lifecycle.
- Experience working with space standards and engineering processes.
- Familiarity with mission control environments and spacecraft operations tools.
- Experience creating, reviewing, and validating spacecraft procedures.
- Exposure to spacecraft testing, integration, and verification activities.
- Scripting experience using languages such as Python, TCL, or similar.
- A proactive approach with the ability to work independently while collaborating across engineering teams.
Desirable Experience
- Experience with spacecraft operations preparation tools.
- Background supporting live spacecraft operations or mission control activities.
- Knowledge of configuration management processes.
- Experience working within complex, multi-disciplinary engineering environments.
Whats on Offer
- Flexible hybrid working environment.
- Opportunity to work on advanced spacecraft technology and future-focused missions.
- Supportive and collaborative engineering culture.
- 25 days annual leave plus bank holidays, increasing with service.
- Optional 9-day fortnight working pattern.
- Private healthcare and life insurance benefits.
- Relocation support available.
- Visa sponsorship considered for suitable candidates.
- Access to modern engineering facilities and specialist workspace.
- Regular team and company social activities.
If you are an experienced spacecraft operations or systems engineer looking for your next challenge within the space sector, this role offers the opportunity to contribute to exciting missions while working alongside talented engineers developing cutting-edge technology.
TT....Read more...
Embedded Hardware Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: FPGA/VHDL, Java or C/C++Nice to have's: Python, Siemens PLC, Maven/Ant, SQL Server, Linux, Docker, GIT, Jenkins, Sonatype Nexus
Our Client:Is a pioneering, family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek a highly skilled Embedded Hardware Developer with a background in Electronic Engineering and experience in FPGA/VHDL to join our client's team. As an Embedded Hardware Developer, you will design, develop, and maintain simulated signal-processing systems, combining C++, Java or Python with FPGA/VHDL.
Your Tasks:
Development and simulation of complex signal processing systems
Design and verification of simulated signal processing system with hardware (mainly FPGA/ VHDL)
Design and development of PCB for control systems
Maintenance and further development of the internal firmware environment and hardware
Commissioning and tests of control systems
Required Skills:
Master’s or Bachelor’s degree in electrical science or similar education
Experience in signal processing, FPGA designs and VHDL programming
Experience in PCB development for control systems
Knowledge of component-oriented design with JAVA OSGI/RCP, with SPS programming (Siemens) and with Python as a plus
Alternatively, strong C++ skills are welcome
Good language skills in English and German (both spoken and written)
Positive work attitude. Collaborative team player with excellent communication skills to support team members
Ability to work in interdisciplinary teams
Benefits:
CHF 100 -130k + Bonus Benefits
Opportunity to work on exciting projects
Collaborative and dynamic international team environment
Remote work options with flexible working hours
Professional development opportunities and mentorship
Comprehensive benefits package, including health insurance, retirement plan, and more
Access to cutting-edge technologies and tools
Recognition and rewards for outstanding performance
30 Days Annual Leave
Location: Aargau, Baden, Switzerland (Remote)Salary: CHF 100 -130k + Bonus Benefits
Mandatory Skillset: FPGA/VHDL, Java or C/C++Nice to have's: Python, Siemens PLC, Maven/Ant, SQL Server, Linux, Docker, GIT, Jenkins, Sonatype Nexus
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/ARG100130....Read more...
An exciting opportunity has arisen for a Systems Engineer, focussed on Integration & Test, to join a team developing advanced flight simulation systems used by pilot training operations around the world.
You will play a key role in system integration, verification, and validation, ensuring these complex simulators meet rigorous operational standards and customer requirements. This is a hands-on position at the heart of a major transformation programme, ideal for someone who is highly motivated, customer-focused, and eager to implement change.
Key Responsibilities
- Contribute to the integration of hardware and software subsystems into cohesive flight simulation systems.
- Collaborate with multidisciplinary teams to design and execute integration procedures.
- Diagnose and resolve integration issues, optimizing system configurations for performance and reliability.
- Define and execute test plans to verify functionality, safety, and regulatory compliance.
- Develop and conduct test procedures to validate the accuracy and reliability of flight simulation systems.
- Respond to issues identified during testing or customer feedback.
- Troubleshooting, root-cause analysis, and technical support to resolve complex system problems quickly.
Qualifications & Experience
- Bachelors degree in Aerospace, Electrical, or Systems Engineering, or a related field (Masters a plus).
- Proficiency in system integration, hardware/software interfaces, and performance testing.
- Experience with simulation tools and platforms (e.g., MATLAB, Simulink, RTOS).
- Excellent written and verbal communication skills and strong analytical/problem-solving abilities.
Benefits
- Discretionary Annual Bonus
- 25 days holiday (plus bank holidays), increasing with service, with the option to buy/sell up to 5 days.
- Private medical insurance (optional family cover).
- Pension scheme with up to 7% employer contribution.
- Life assurance (4x salary, flexible up to 10x).
- Group income protection.
- Flexible benefits including healthcare cash plan, dental cover, gym membership, critical illness cover, and cycle-to-work scheme.
- Employee assistance programme for mental health and wellbeing support.
- Subsidised staff restaurant and on-site parking with electric vehicle charging stations.
Additional Information
- Primarily office-based (four days a week) with regular lab and simulator facility interaction.
- Applicants must have the right to work in the UK.
This is a unique opportunity to contribute to next-generation flight simulation technology, working with cutting-edge systems that enhance pilot training and aviation safety worldwide.
TT....Read more...
