Test Technician – Electronics
Are you a Test Technician with hands-on experience testing electronic or power-based systems, looking to work with high-power, cutting-edge technology?
Our client, a global leader in green energy technology, is expanding their specialist R&D and test team in Glasgow, Scotland. This hybrid role offers strong technical exposure, long-term development, and the opportunity to support advanced battery charging and power conversion products used in robotics, defence, rail, and industrial automation.
Key Responsibilities for this Test Technician – Electronics job are:
Test industrial charging systems, comparing results to given specifications.
Construct, modify and maintain test fixtures and setups, following electrical diagrams.
Setup equipment such as power supplies, oscilloscopes and data loggers.
Assembly of cables and connectors for test setups.
Prepare reports to be shared with R&D engineers and management.
Requirements for this Test Technician – Electronics job are:
Experience working with high power electrical systems.
Knowledge of product test procedures and the ability to follow instructions.
Practical knowledge of laboratory equipment such as Thermal chambers, power supplies and oscilloscopes would be ideal. Otherwise, the potential to transfer skills from another background.
The ability to work safely with high voltages, as our current products may be powered by up to 660Vac, 3Ph, input.
Experience in industrial, defence, rail, power, or similar sectors is beneficial.
To apply for this Test Technician – Electronics role: Please send your CV to NDrain@redlinegroup.Com....Read more...
Electronic Production Technician to work on low volume, high value Electronic Systems manufacturing principally with hand tools including micro soldering, test, fault finding and repair of electrical and electronic systems and components.
You will integrate and test electrical and electromechanical tools and take responsibility for the test equipment used to test tools.
Experience and skills required
Electronic lab equipment including: Multi-meter, Oscilloscope, Low Voltage Power Supplies, High Voltage Power Supply, measurement, test and debugging of electromechanical assemblies.
Electrical or Electronic engineering qualification (e.g ONC, HNC, HND, NVQ Level 2)
Proven ability to work successfully within design constraints.
Electronic tools and general test equipment competence.
Producing deliverable items from full drawing packs to relevant IPC standards.
Role responsibilities
Good electronic technician skills: testing, low and high voltage experience, basic soldering, crimping, and assembly.
Fault finding and rectification at system and component level.....Read more...
Electronic Manufacturing Technician required to test, fault find and repair various electrical or electronic systems and components of rotary steerable systems, Measurement While Drilling tools, Specialised Measurement tools and Rechargeable Batteries for Downhole use and power source products.
You will work as part of engineering and quality driven manufacturing teams covering Mechanical manufacturing Technicians and supervisors integrating and testing electrical and electromechanical tools. You will also be responsible for maintaining and repairing the test equipment used to test tools.
Experience
Electronic technician experience of testing, low and high voltage experience, basic soldering, crimping, and assembly.
Basic fault finding and rectification at system and component level.
Further education in Electrical or Electronic engineering (ONC, HNC, HND, NVQ Level 2)
Working within design constraints.
Multi-meter, Oscilloscope, Low Voltage Power Supplies, High Voltage Power Supply (up to 400VDC) to make measurements on and for test and debugging of electromechanical assemblies
Responsibilities
Producing deliverable items from full drawing packs with minimal additional help to relevant IPC standards. ....Read more...
A fantastic opportunity has arisen for a Mechanical Manufacturing Technician at a leading company. You will be working with the production team comprised of Electrical assemblers, Electrical manufacturing Technicians, and supervisors
Key requirements
Good competencies with electrical tools and general test equipment.
Capable of producing deliverable items from full drawing packs with minimal additional help.
Good mechanical technician skills. Experience with various hand tools and assembly tools (presses)
Testing, low and high voltage assemblies, basic soldering, crimping, and mechanical lifting.
Basic fault finding when necessary.
Key skills
Experience in mechanical assembly and pressure equipment. Experience in documentation, working with drawings.
As part of the recruitment process a practical test will be performed. The test will involve building a standard sub-assembly.
Experience in fault finding, repairing electromechanically systems....Read more...
A fantastic opportunity has arisen for a Mechanical Manufacturing Technician at a leading company. You will be working with the production team comprised of Electrical assemblers, Electrical manufacturing Technicians, and supervisors
Key requirements
Good competencies with electrical tools and general test equipment.
Capable of producing deliverable items from full drawing packs with minimal additional help.
Good mechanical technician skills. Experience with various hand tools and assembly tools (presses)
Testing, low and high voltage assemblies, basic soldering, crimping, and mechanical lifting.
Basic fault finding when necessary.
Key skills
Experience in mechanical assembly and pressure equipment. Experience in documentation, working with drawings.
As part of the recruitment process a practical test will be performed. The test will involve building a standard sub-assembly.
Experience in fault finding, repairing electromechanically systems....Read more...
Space thruster Test Technician required to support Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
Space thruster Test Technician required to support Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
Mechanical Fitter required to work as a Space thruster Test Technician supporting Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
Mechanical Fitter required to work as a Space thruster Test Technician supporting Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
Test technician with good all round precision engineering mechanical test validation and verification experience required to join a comprehensive in house test facility. Component, product, mechanical testing, assembly and disassembly experience ideally with test equipment maintenance, calibration, environmental screening, modification, troubleshooting and repair skills will be put to great use in this role.
Previous experience in a mechanical apprenticeship, ONC or HNC in engineering, NVQ or C&G level 3 in mechanical engineering is required ideally with.
Proficient in the use of measurement equipment such as micrometres, megohmmeter, gauges etc . Advantageous to have industry experience with tools ideally in Well Intervention
You???ll be responsible for assembly, fault finding, and repair of various mechanical and electromechanical systems and components....Read more...
We are seeking a skilled technician to work closely with the Senior Test Engineer at aircraft test facilities. You will work extensively with high-pressure gas and fluid systems.
Key Responsibilities
Proactively respond to any issues related to the engine or test site to ensure safety.
Assist in managing operations that involve hazardous materials.
Ensure that correct pressures are maintained in the feedlines during tests.
Assist lead Test Engineers with: site preparation and maintenance: conducting pressure and control system checks: instrument calibration and steam boiler operations.
Assisting with instrumentation, installation, and removal of flight engines before and after hot fire tests.
Required Skills and Competencies
Hands-on mechanical fitter or engineering skills, ideally gained within an engineering-focused organization.
A proactive attitude toward safety and operational support.....Read more...
We are seeking a skilled technician to work closely with the Senior Test Engineer at aircraft test facilities. You will work extensively with high-pressure gas and fluid systems.
Key Responsibilities
Proactively respond to any issues related to the engine or test site to ensure safety.
Assist in managing operations that involve hazardous materials.
Ensure that correct pressures are maintained in the feedlines during tests.
Assist lead Test Engineers with: site preparation and maintenance: conducting pressure and control system checks: instrument calibration and steam boiler operations.
Assisting with instrumentation, installation, and removal of flight engines before and after hot fire tests.
Required Skills and Competencies
Hands-on mechanical fitter or engineering skills, ideally gained within an engineering-focused organization.
A proactive attitude toward safety and operational support.....Read more...
Mechanical Technician required to produce and assemble components including conduct tests, measurements, operations and process controls as part of a marine assembly systems manufacturing team.
The ideal candidate will have precision engineering maritime or aerospace production experience reading blueprints to identify components, perform production assembly, test and repair.
Requirements
Manufacturing experience in comparable high value low volume environment, ideally maritime, subsea or aerospace.
Mechanical production using hand tools, automated machines and assemblies.
Quality processes understanding, assembly, test, troubleshoot, repair, test.
Other relevant skills include:
Wire preparation, strip, crimp and termination.
Manufacturing Systems tools maintenance and harness repair.
Hydraulic machine operation and programming.
Continuous improvement.
Responsibilities
Mechanical assembly of precision engineers high value projects.
Prosecute test techniques as per cell procedure.
Work from bill of materials, job packets, routings, work orders, wire lists and quality procedures.
Evaluate, repair and maintain production tooling and equipment.....Read more...
Mechanical Technician required to produce and assemble components including conduct tests, measurements, operations and process controls as part of a marine assembly systems manufacturing team.
The ideal candidate will have precision engineering maritime or aerospace production experience reading blueprints to identify components, perform production assembly, test and repair.
Requirements
Manufacturing experience in comparable high value low volume environment, ideally maritime, subsea or aerospace.
Mechanical production using hand tools, automated machines and assemblies.
Quality processes understanding, assembly, test, troubleshoot, repair, test.
Other relevant skills include
Wire preparation, strip, crimp and termination.
Manufacturing Systems tools maintenance and harness repair.
Hydraulic machine operation and programming.
Continuous improvement.
Responsibilities
Mechanical assembly of precision engineers high value projects.
Prosecute test techniques as per cell procedure.
Work from bill of materials, job packets, routings, work orders, wire lists and quality procedures.
Evaluate, repair and maintain production tooling and equipment.....Read more...
Mechanical Technician required to produce and assemble components including conduct tests, measurements, operations and process controls as part of a marine assembly systems manufacturing team.
The ideal candidate will have precision engineering maritime or aerospace production experience reading blueprints to identify components, perform production assembly, test and repair.
Requirements
Manufacturing experience in comparable high value low volume environment, ideally maritime, subsea or aerospace.
Mechanical production using hand tools, automated machines and assemblies.
Quality processes understanding, assembly, test, troubleshoot, repair, test.
Other relevant skills include:
Wire preparation, strip, crimp and termination.
Manufacturing Systems tools maintenance and harness repair.
Hydraulic machine operation and programming.
Continuous improvement.
Responsibilities
Mechanical assembly of precision engineers high value projects.
Prosecute test techniques as per cell procedure.
Work from bill of materials, job packets, routings, work orders, wire lists and quality procedures.
Evaluate, repair and maintain production tooling and equipment.....Read more...
Mechanical Technician required to produce and assemble components including conduct tests, measurements, operations and process controls as part of a marine assembly systems manufacturing team.
The ideal candidate will have precision engineering maritime or aerospace production experience reading blueprints to identify components, perform production assembly, test and repair.
Requirements
Manufacturing experience in comparable high value low volume environment, ideally maritime, subsea or aerospace.
Mechanical production using hand tools, automated machines and assemblies.
Quality processes understanding, assembly, test, troubleshoot, repair, test.
Other relevant skills include
Wire preparation, strip, crimp and termination.
Manufacturing Systems tools maintenance and harness repair.
Hydraulic machine operation and programming.
Continuous improvement.
Responsibilities
Mechanical assembly of precision engineers high value projects.
Prosecute test techniques as per cell procedure.
Work from bill of materials, job packets, routings, work orders, wire lists and quality procedures.
Evaluate, repair and maintain production tooling and equipment.....Read more...
Are you an experienced Electronics Test & Assembly Technician? Would you like to work alongside our R&D team and contribute to developing our next generation of products?Responsibilities and duties will include inspection, test & repair of some PCB sub-assemblies, and complete in-house components assembly production. The Technician will be involved in a wide range of activities related to electronic/electrical components for the production and detection of x-rays and control of associated high-speed machinery.Cheyney Design (part of the Cheney Group of Companies) is a dynamic technology and manufacturing business based near Royston, Hertfordshire. Working closely with our sister company, Sapphire Inspection Systems, we design and manufacture advanced X-ray inspection systems, modules, and software used globally across the food, pharmaceutical, and process equipment industries.Key Responsibilities
Support the X-Ray and controls component manufacturing department in production, development, testing and quality control.Work according to test process for x-ray generators, detectors, control boards and industrial PC components prior to installation or shipment.Fault find electronics and define required revisions or repairs.Support testing, evaluating, modifying and re-testing solutions.Analyse data and create reports.Work alongside technical development teams on special development projects.Work with development, manufacturing and service departments to control/organise the versions of firmware to ensure that the latest versions are installed on devices.
Skills and ExperienceWhilst a qualified technician is preferred, we are interested in any candidate able to demonstrate an outside enthusiasm in electronics, an inquisitive, enquiring mind, and a "can do", self-starting character.The ideal candidate will be a great problem solver and have experience in:
Sub-Assembly testing, including provision of reports, using equipment such as multi-meters, oscilloscopes and other test rigsFollowing schematics and assembly diagrams to identify components and test points.Soldering and rework of printed circuit boards.Working to existing SOP'sProduction assembly of small batch runsPrototype assembly
Desirable:
Bill of materials creationCapture, author and editing SOP'sPCB assembly inspection
Package and BenefitsAs a key member of our growing team, this role offers opportunities for career growth and personal progression. You will report to the Components Production Supervisor.
Office-based role, Monday-Friday, 9:00am-5:00pmLocation: Head Office, Litlington, RoystonSalary: circa £32,000, depending on experiencePension: Nest Pension SchemeHoliday: 25 days per annum
How to Apply:If you are interested in this position and would like to learn more we would love to hear from you. Please attach your CV to the link provided and we will be in contact. ....Read more...
Welding Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Cleanroom Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Cleanroom Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Welding Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
An established engineering manufacturer is seeking an Electronic Manufacturing Technician to join its production team in Stonehouse.
The role
Test, fault-find, and repair electronic and electromechanical assemblies
Carry out functional testing of PWAs and PCBAs to defined procedures
Support tool assembly, calibration, and production activities
Maintain and repair test equipment
Work with MRP systems (SAP) and production documentation
About you
Background in electronic or electrical manufacturing or testing
Comfortable with multimeters, oscilloscopes, and LV and HV power supplies
Skilled in soldering, crimping, wiring, and basic fault finding
Able to read drawings and work to IPC standards
Qualification such as ONC ,HNC , HND ,NVQ Level 2 preferred
....Read more...
An established engineering manufacturer is seeking an Electronic Manufacturing Technician to join its production team in Stonehouse.
The role
Test, fault-find, and repair electronic and electromechanical assemblies
Carry out functional testing of PWAs and PCBAs to defined procedures
Support tool assembly, calibration, and production activities
Maintain and repair test equipment
Work with MRP systems (SAP) and production documentation
About you
Background in electronic or electrical manufacturing or testing
Comfortable with multimeters, oscilloscopes, and LV and HV power supplies
Skilled in soldering, crimping, wiring, and basic fault finding
Able to read drawings and work to IPC standards
Qualification such as ONC ,HNC , HND ,NVQ Level 2 preferred
....Read more...
We are seeking a proactive and detail-oriented individual to join our team as a Test Technician. In this role, you will provide essential support to lead Test Engineers in various tasks related to site preparation, maintenance, and testing activities. Your responsibilities will include but are not limited to:
Assisting in site preparation and maintenance tasks
Conducting pressure and control systems checks
Operating mechanical and steam vacuum systems
Performing instrumentation calibrations
Maintaining and operating steam boilers
Operating high-pressure gas and fluidic systems
Utilising electrical and electronic measurement and testing equipment
Skills and Behavioural Competencies:
Degree in Aerospace, Mechanical or Electrical Engineering, or equivalent
Experience working with high-pressure gas systems
Familiarity with electronics and High Voltage equipment
....Read more...
We are seeking a proactive and detail-oriented individual to join our team as a Test Technician. In this role, you will provide essential support to lead Test Engineers in various tasks related to site preparation, maintenance, and testing activities. Your responsibilities will include but are not limited to:
Assisting in site preparation and maintenance tasks
Conducting pressure and control systems checks
Operating mechanical and steam vacuum systems
Performing instrumentation calibrations
Maintaining and operating steam boilers
Operating high-pressure gas and fluidic systems
Utilising electrical and electronic measurement and testing equipment
Skills and Behavioural Competencies:
Degree in Aerospace, Mechanical or Electrical Engineering, or equivalent
Experience working with high-pressure gas systems
Familiarity with electronics and High Voltage equipment
....Read more...
