Highways Design Principal Engineer
3 months on-going contract, Inside IR35
Kingston
About the role
The Principal Engineer is responsible for the management of the relevant service within Highway and Transport and to provide specialist professional advice relevant to your team's area of responsibility. Depending on the role, you will need to deliver excellence in sustainable transport and strategy - leading on developing our projects and programmes and engaging with our communities and stakeholders, and/or excellent management of detailed design and delivery, and contractor management - either in highways, traffic, or street lighting field of expertise
Job Purpose
To progress and secure the effective project management of assigned projects through relevant stages from conception through to implementation and monitoring.
To undertake the role of Project Manager for large, complex and multi-disciplined projects including consultation, programming, planning and coordination.
To co-ordinate, prioritise work, establish work programmes and schedules for the assigned functional areas of work and ensuring their achievement and provide or secure technical guidance and training as necessary in this connection.
To develop, design, consult, progress and implement measures to improve the boroughs Highway and Transport network.
To assist in the analysis of service requirements and the development, review and monitoring of performance indicators by which the quality, efficiency and cost effectiveness of the work of the Team or Service is demonstrated.
To be responsible for ensuring that your team conforms to the councils quality standards, standing orders, and relevant legislation.
To participate in the production, development and review of contracts, technical codes of practice and the tendering process from pre-feasibility to post implementation reviews for the assigned functional areas of responsibility.
To manage and administer contracts with consultants and contractors.
To provide or secure the provision of technical advice on all matters covered by the assigned functional areas within the Service.
To assist in preparing advice to senior management and Council on the effects of relevant new or draft legislation, Codes of Practice or other initiatives, publications or developments, ensuring that appropriate Members and other interested parties are properly briefed and advised.
If interested in the role, please contact me at moeez.muhammed@servicecare.org.uk....Read more...
Audio Visual (AV) Commissioning Engineer - I currently need a tried and tested av commissioning engineer to work for an engineering biased audio visual systems organisation. The role will see you working within a busy team delivering solutions to the corporate /commercial market place. The position would suit someone with at least 4years hands on commissioning experience with skills dealing with presentation solutions (Screens, Projector), audiovisual racks, Cisco VC / Poly videoconference systems, Videowalls, signal distribution, Crestron control configuration. Due to the nature of this role you will be expected to work on your own and be able to communicate effectively and professionally with clients. You will be working in London and sometimes further afield. A good solid understanding of sound, video, clearone, QSYS, QSC, Dante, sound web, (DSP) Bi-Amp, IP and some basic AV systems programming would be nice to see within the CV. If you are interested in this role please send me a full technical CV detailing your hands on skills and previous experience. The client are also open to taking people on with good av installation or av service backgrounds.NO SPONSORSHIP IS ON OFFER YOU MUST BE IN THE UK AND WORKING HERE LEGALLY CRESTRON POLYCOM VC CISCO VIDEOCONFERENCE INTEGRATION INSTALLATION RACK COMMISSIONING EXTRON CORPORATE RACK VIDEO A/V AUDIO/VISUAL AUDIO-VISUAL A-V AUDIO VISUAL VISION SOUND SWITCHING AV CORPORATE CLEARONE BI-AMP QSC QSYS LONDON HERTS HERTFORDSHIRE ESSEX....Read more...
Audio Visual (AV) Commissioning Engineer - I currently need a tried and tested av commissioning engineer to work for an engineering biased audio visual systems organisation. The role will see you working within a busy team delivering solutions to the corporate /commercial market place. The position would suit someone with at least 4years hands on commissioning experience with skills dealing with presentation solutions (Screens, Projector), audiovisual racks, Cisco VC / Poly videoconference systems, Videowalls, signal distribution, Crestron control configuration. Due to the nature of this role you will be expected to work on your own and be able to communicate effectively and professionally with clients. You will be working in London and sometimes further afield. A good solid understanding of sound, video, clearone, QSYS, QSC, Dante, sound web, (DSP) Bi-Amp, IP and some basic AV systems programming would be nice to see within the CV. If you are interested in this role please send me a full technical CV detailing your hands on skills and previous experience. The client are also open to taking people on with good av installation or av service backgrounds.NO SPONSORSHIP IS ON OFFER YOU MUST BE IN THE UK AND WORKING HERE LEGALLY CRESTRON POLYCOM VC CISCO VIDEOCONFERENCE INTEGRATION INSTALLATION RACK COMMISSIONING EXTRON CORPORATE RACK VIDEO A/V AUDIO/VISUAL AUDIO-VISUAL A-V AUDIO VISUAL VISION SOUND SWITCHING AV CORPORATE AUDINATE DANTE QSC QSYS LONDON BERKS BERKSHIRE SURREY BUCKS BUCKINGHAMSHIRE....Read more...
Audio Visual (AV) Commissioning Engineer - I currently need a tried and tested av commissioning engineer to work for an engineering biased audio visual systems organisation. The role will see you working within a busy team delivering solutions to the corporate /commercial market place. The position would suit someone with at least 4years hands on commissioning experience with skills dealing with presentation solutions (Screens, Projector), audiovisual racks, Cisco VC / Poly videoconference systems, Videowalls, signal distribution, Crestron control configuration. Due to the nature of this role you will be expected to work on your own and be able to communicate effectively and professionally with clients. You will be working in London and sometimes further afield. A good solid understanding of sound, video, clearone, QSYS, QSC, Dante, sound web, (DSP) Bi-Amp, IP and some basic AV systems programming would be nice to see within the CV. If you are interested in this role please send me a full technical CV detailing your hands on skills and previous experience. The client are also open to taking people on with good av installation or av service backgrounds.NO SPONSORSHIP IS ON OFFER YOU MUST BE IN THE UK AND WORKING HERE LEGALLY CRESTRON POLYCOM VC CISCO VIDEOCONFERENCE INTEGRATION INSTALLATION RACK COMMISSIONING EXTRON CORPORATE RACK VIDEO A/V AUDIO/VISUAL AUDIO-VISUAL A-V AUDIO VISUAL VISION SOUND SWITCHING AV CORPORATE CLEARONE BI-AMP QSC QSYS LONDON....Read more...
Regional Maintenance Manager (Heavy Plant)
Location: Cornwall & South West Devon
Salary: Up to £70k + Excellent Benefits
The Client:
Our client is a privately owned mineral and aggregates contractor with extensive experience in the plant industry.
The Role:
As a Regional Maintenance Manager, you ill be responsible for minimising asset downtime and driving repair, servicing, and compliance standards.
Duties:
* Safeguard company assets, monitor major component health, and support overall asset lifecycle management.
* Supervise asset compliance and lead the regional Field Service Engineer (FSE) team.
* Exercise informed decision-making to optimise operational performance and asset condition.
* Direct maintenance activities across the region, encompassing breakdowns, servicing, preventive maintenance, and defect management.
* Ensure comprehensive compliance for all controlled assets, including brake testing, LOLERs, 6-weekly inspections, and MOTs.
* Report directly to the Head of Assets & Commercial to contribute to maintenance operations success.
* Collaborate with the Head of Field Service and Warranty/Technical Managers at Head Office.
* Facilitate communication with manufacturers, suppliers, and customers.
* Drive cost-control and performance-enhancement initiatives, actively monitoring wear component performance (e.g., Tyres, GET, UC) to minimise expenses.
* Act as the primary manager and contact point for regional Service Engineers.
Requirements:
* Previous experience working as a Regional Maintenance Managerin a similar role.
* Strong skills as a Regional Maintenance Manager with expertise in Heavy Plant equipment.
* Excellent man-management, communication, and decision-making abilities.
* Proactive approach to safety and a commitment to maintaining high standards.
* IT proficiency, including the use of Excel and asset databases.
Benefits:
* Competitive Salary
* Company vehicle
* Income protection
* Pension scheme
* Private medical coverage
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources are an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: Maintenance Manager, Plant Manager, Plant Engineer, Workshop Manager, Heavy Plant, manager, plant
....Read more...
**************************** Graduate Sales Engineer*************************************** We have an exciting opportunity for a graduate sales engineer to work for a long-standing market leading company, based in the picturesque Thames Valley, that provides customer focused energy efficient solutions with the UK HVAC (Heating, Ventilation, and Air Conditioning) market. Their portfolio of clients includes some of the leading shopping centres, schools, universities, museums, and galleries to name but a few.Due to their growth and success, they have an entry level role for a Sales Engineer that would suit a graduate or anyone with an understanding of HVAC and a technical discipline. In this key role you will promote their wide range of standard and bespoke products through their existing client base and establish your own client network with the support of the Sales Engineer.You will ideally have had some exposure to a sales role including retail.• Respond to, qualify, and follow up sales enquiries using appropriate methods in a timely manner• Provide pre-sales technical expertise and product education to new and existing customers• Offer customers the product or service that best satisfies their requirements in terms of technical specification, quality, price and delivery.• Working at pace and with accuracy, you will build a solid understanding of the market for their products and services.• Due to the technical nature of the solutions offered it is essential that you have a technical background and the ability to read/interpret drawings, specifications.Salary £28, 000- £35,000 + after 6 months successfully passing probation, there will be a commission structure and other benefits.Location High Wycombe, office based.This is an exciting opportunity to grow and develop within a well-established company working with a dedicated supportive team and enjoying a great working culture.If you are a Graduate with a Bsc or Beng equivalent in a technical discipline, such as Mechanical or Electrical Engineering have excellent communication skills and a good understanding of HVAC then please get in touch.....Read more...
Job Title: Mechanical Engineer/Fitter
Location: Somerton, Somerset, UK Salary: £27,000.00-£35,000.00 per year Job Type: Full-time, Permanent
About Us: We are a leading supplier of materials testing equipment and accessories, operating from our UKAS-accredited site in Somerton, Somerset. We are dedicated to quality and customer satisfaction and are seeking an experienced Mechanical Engineer/Fitter to join our friendly team.
Job Description: As a Mechanical Engineer/Fitter, you will play a key role in manufacturing new equipment, servicing, repairing, and calibrating existing systems, and troubleshooting. This varied role will also involve site work in the UK and abroad, installing, commissioning, and servicing equipment at customer premises. The role also gives you the opportunity to travel the world!
Key Responsibilities:
Manufacture, install, commission, service, and repair hardness testing equipment and accessories, from heavy machinery to intricate sub-assemblies.
Calibrate and UKAS-certify our equipment (training provided to achieve UKAS-accredited Operator/Signatory status).
Complete necessary testing and paperwork and prepare products for despatch.
Assist in training other employees.
Support ISO compliance with the Management Team.
Work independently after training and be a flexible, team-oriented player.
Qualifications & Experience:
HNC or equivalent/higher in a relevant field.
Good practical experience in a mechanical engineering environment.
Full driving licence.
Experience in machine wiring and panel building is advantageous.
Strong administrative skills and the ability to follow procedures.
Good manner with customers and suppliers.
Benefits:
Company events
Company pension
Free on-site parking
Overtime paid at time and a half
Training: Relevant training will be provided, including additional qualifications where appropriate and to ensure compliance with industry standards.
....Read more...
Product Design Mechanical Engineer – Medical Device – Warwick
A growing Medical Devices company, located in Warwick, is currently seeking an experienced Product Design Mechanical Engineer to contribute to the development of various Medical Devices.
As part of a team of engineering experts, including physicists, electronics engineers, scientists, and other specialists in Medical Devices, you will play a pivotal role in working on a range of projects aimed at creating life-saving and life-improving Medical Devices.
We are specifically looking for candidates with experience in Medical Devices, preferably in the areas of product design and product development. However, individuals from the life sciences sector with experience working under strict regulations will also be considered.
The ideal candidate would have a few years of industry experience and might be seeking their second role to advance their career. While a relevant degree in Mechanical Engineering or a related field is preferred, it is not essential if you have substantial experience as a Mechanical Design Engineer in the Medical Devices sector.
In return for your contributions, you will receive a competitive salary, regular salary reviews, bonuses, a pension plan, life assurance, and other outstanding benefits typically associated with larger organizations.
This is a fantastic opportunity to join a growing company that places a strong emphasis on staff development and career advancement. Due to the anticipated high level of interest, we encourage interested candidates to apply promptly to avoid missing out.
For further information, please feel free to contact Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will reach out to you.
Newton Colmore Consulting specializes in recruiting within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Lead Electrical Maintenance Engineer (Apartment Servicing) - London Bridge - Up to £50,000 I have a fantastic opportunities to work for a leading maintenance company in London Bridge, working at a Brand new building behalf of a large property management company looking after a high end residential building. You will carry out PPM's and reactive maintenance, statutory compliance and general building maintenance tasks with large mixed use property. My client is looking for a Electrical & Mechanical Maintenance Engineer with experience in critical building services to work on a High profile Building at London Bridge carrying out maintenance on Luxury High End Residential Apartments. HoursMonday to Friday - 08:00am - 17:00pmRequirementsApprentice TrainedElectrical or Mechanical - City & Guilds Level 2 and 3 or Equivalent17th EditionClient FacingHigh End Residential ExperienceHV / LV Authorised (Desirble)Commercial Building Maintenance ExperienceAbility to work under pressure whilst remaining calm, clear thinking and able to deliver the required services to the client within given time constraints.PackageBasic Salary of up to £50,00024 Days Annual leave + Bank HolidaysPensionHealthcarePlenty of OTInternal and External Training courses Career progression - would want the engineer to develop into supervisors and above.Duties Electrical and Mechanical PPM's and Reactive maintenanceGeneral building services tasksEmergency lighting, Fire alarms, FCU's, AHU's, HVAC plant, Water treatmentKnowledge of UPS, BMS, Chillers, Cooling plant, HV and LV systemsWorking as part of a small maintenance team to deliver a great service to the clientEscorting Sub-contractors, Issuing permits / RAMSMy client is able to interview straight away if the right candidates are available so to avoid missing out please send your CV today to Dan Barber at CBW Staffing Solutions....Read more...
IT Security Engineer | Telecoms | Gibraltar / Spain / UK | Hybrid
IT Security Engineer required for an exciting Telecoms company based in Gibraltar.
What's on offer to you?
Implement new security protocol
Working with a Managed Service Provider
Reporting to the Director
What You Will Be Doing
Review security logs and respond to security incidents and alerts in a timely manner.
Conduct security audits and compliance assessments to ensure adherence to industry regulations and standards such as ISO 27001 and GDPR.
Collaborate with third-party vendors to ensure the security of their systems and applications that provide service(s) to the business.
Educating employees on security best practices and provide security awareness training.
Stay up-to-date with the latest security threats, trends, and technologies.
Design and implement security solutions that align with the company's security policies, procedures, and standards.
Manage security infrastructure such as firewalls, intrusion detection/prevention, data loss prevention and EDR systems.
Participate in an on-call roster.
Fully remote role with occasional travel to company locations if/when required.
Ability to work outside of regular business hours when required to support critical systems & infrastructure.
What You Will Need to Succeed In This Role
Experience with compliance requirements such as PCI DSS, ISO 270001 and GDPR.
Experience with SIEM platforms such as ELK, Graylog or Splunk.
Experience with vulnerability scanners & management tools such as Qualys, Rapid7, Tenable or Taegis VDR.
Experience with EDR platforms such as CarbonBlack, Crowdstrike, SentinelOne or Defender for Endpoint (ATP).
Experience with NGFW solutions such as Fortigate or Palo Alto.
2+ years’ experience in a similar role.
Excellent written and verbal communication skills, with the ability to liaise with both technical and non-technical staff.
Ability to complete complex tasks methodically, with an eye for detail.
Enthusiastic and passionate about IT.
Excellent organisation, task prioritisation and time management skills, with the ability to operate independently.
Experience with Atlassian JIRA, Bamboo and Confluence (desirable)
Experience with Juniper EX switches (desirable)
Knowledge of NDR & XDR solutions (desirable)
To Apply
If you are an experienced IT Security Engineer, and this is the challenge that you are looking for in your career, get in touch with me today. Please click on the ‘apply’ button and upload your CV and a Cover Letter or alternatively contact Robert Ally, Recruitment Consultant by email Robert.ally@srgeurope.com or call Gibraltar +350 200 69999.
Keywords: IT Security Engineer | Gibraltar | PCI DSS| ISO 27001....Read more...
IT Security Engineer | Telecoms | Gibraltar / Spain / UK | Hybrid
IT Security Engineer required for an exciting Telecoms company based in Gibraltar.
What's on offer to you?
Implement new security protocol
Working with a Managed Service Provider
Reporting to the Director
What You Will Be Doing
Review security logs and respond to security incidents and alerts in a timely manner.
Conduct security audits and compliance assessments to ensure adherence to industry regulations and standards such as ISO 27001 and GDPR.
Collaborate with third-party vendors to ensure the security of their systems and applications that provide service(s) to the business.
Educating employees on security best practices and provide security awareness training.
Stay up-to-date with the latest security threats, trends, and technologies.
Design and implement security solutions that align with the company's security policies, procedures, and standards.
Manage security infrastructure such as firewalls, intrusion detection/prevention, data loss prevention and EDR systems.
Participate in an on-call roster.
Fully remote role with occasional travel to company locations if/when required.
Ability to work outside of regular business hours when required to support critical systems & infrastructure.
What You Will Need to Succeed In This Role
Experience with compliance requirements such as PCI DSS, ISO 270001 and GDPR.
Experience with SIEM platforms such as ELK, Graylog or Splunk.
Experience with vulnerability scanners & management tools such as Qualys, Rapid7, Tenable or Taegis VDR.
Experience with EDR platforms such as CarbonBlack, Crowdstrike, SentinelOne or Defender for Endpoint (ATP).
Experience with NGFW solutions such as Fortigate or Palo Alto.
2+ years’ experience in a similar role.
Excellent written and verbal communication skills, with the ability to liaise with both technical and non-technical staff.
Ability to complete complex tasks methodically, with an eye for detail.
Enthusiastic and passionate about IT.
Excellent organisation, task prioritisation and time management skills, with the ability to operate independently.
Experience with Atlassian JIRA, Bamboo and Confluence (desirable)
Experience with Juniper EX switches (desirable)
Knowledge of NDR & XDR solutions (desirable)
To Apply
If you are an experienced IT Security Engineer, and this is the challenge that you are looking for in your career, get in touch with me today. Please click on the ‘apply’ button and upload your CV and a Cover Letter or alternatively contact Robert Ally, Recruitment Consultant by email Robert.ally@srgeurope.com or call Gibraltar +350 200 69999.
Keywords: IT Security Engineer | Gibraltar | PCI DSS| ISO 27001....Read more...
Job title: Design Engineer
Reference: E113381
Location: Macclesfield
Duration: Perm
Start date: ASAP
Salary: Negotiable depending on experience
Industry sector: Manufacturing
Experienced Design Engineer required for a successful, specialist manufacturing business based in Macclesfield.
This is a unique opportunity to join a group with a strong focus and commitment to design, quality and sustainability. You will be joining a young and innovative business and must possess the drive and ambition to join us on our exciting journey where you will be able to demonstrate the following:
Sound knowledge of Solidworks 3D CAD (specifically weldments, sheet metal and drawings)
Solidworks official certifications as proof of software proficiency.
Experience in a low-batch, high-variation manufacturing environment, although all applicants and backgrounds will be considered.
Ability to communicate confidently with customers, suppliers and group staff.
Self-motivation in personal and departmental development.
Good technical aptitude in steel and timber fabrication.
A methodical, well-researched and pragmatic approach to engineering.
The ability to read, interpret and understand technical specifications and drawings.
Commercial awareness and a solid understanding of the cost implications of design
Extensive experience designing for OEMs.
Understanding of BOMS, Production Routing & MRP systems would be advantageous
As the Design Engineer, you will be comfortable designing simple steel and timber structures, with an aspiration to develop and integrate into the R&D team. These specifications will evolve through creation of GA drawings and full manufacturing packs, with accurate BOM. You must be capable of developing an idea from a customer specification, to finished delivered product.
Working with the Group Senior Design Engineer the key deliverables of this position will be, but are not limited to:
Creation of manufacturing/engineering drawings for production including GA and production drawings, installation details and technical specifications.
Creating accurate BOMs to ensure efficient processing throughout procurement, manufacturing and assembly phases.
Understanding of manufacturing processes, limitations and assembly methods in metals, timber, plastics and stone.
A methodical, well-researched and pragmatic approach to engineering.
A multidisciplinary approach, as products are typically required to be structural and mechanically resolved as well as ergonomic and visually on-trend.
Able to continually challenge what we call “standard” with intelligent data-led counter-proposals.
Having some or all of the above will be advantageous.
In return you will benefit from:
Support from experienced design, manufacturing and procurement teams
Flexible working arrangements
Internal training and professional development support
Access to manufacturing and assembly plants to get hands-on with the results of their work
On offer is a negotiable salary depending on experience, a package including, health cover, company pension, death in service benefit, ongoing training & support and 23 days holidays plus the bank holidays.
To apply for the role of Design Engineer, please click apply now....Read more...
Seeking a Calibration Specialist with extensive experience in UKAS-accredited laboratories to lead calibration procedures and maintain the highest levels of accuracy and reliability. As a Calibration Engineer will ensure the accuracy and reliability of electrical and electronic instruments through meticulous calibration procedures.
You will work closely with service team to provide comprehensive repair and calibration services, both in our environmentally-controlled laboratory and on-site at client locations.
Responsibilities:
Perform calibration and testing of AC and DC power equipment, metering test equipment, and general purpose test and measurement instruments.
Conduct on-site visits for equipment repairs and calibration as part of our field service capability. Maintain accurate records of calibration activities and ensure traceability to national standards.
Requirements:
Bachelor's degree in Electrical Engineering, Electronics, or related field.
Proven experience in calibration, preferably in a UKAS-accredited laboratory environment.
Strong knowledge of AC power and energy measurements, with proficiency in calibration techniques.
Familiarity with electrical test equipment and standards, including power sources and electronic instruments.....Read more...
Application and Development Engineer required for our industry leading manufacture of special purpose equipment. Role Overview: This Northamptonshire based business manufactures bespoke low volume precision components from high grade materials.
The Application and Development Engineer supports the Sales team in providing technical solutions to customer enquiries. You will be involved in the development of new products and associated production methods including test rigs, focusing on satisfying customers needs, products performance and efficiency.
In order to be successful in this role you must meet a minimum of requirements:-
A 2.1 degree in Mechanical engineering
A background in a precision engineering such as; Aerospace/Automotive/Energy/Oil & Gas.
Experience of CAD & PDM (preferably SolidWorks) and FEA tools such as; Ansys Workbench and/or SolidWorks Simulation.
Creation of GD&T engineering drawings with hand calculations (preliminary design, sizing, and stress).
Knowledge of static/rotating components, material selection, conventional manufacturing processes, materials strength/fatigue etc.
Costing, commercial proposals and project work
A natural Innovator, pro-active and driven.
Benefits:
Salary £40 -£45k p.a
Contributory pension, death in service, and income protection benefits.
37-hour workweek (Monday to Thursday 08:30-17.15, Friday 08:30-12:30).
Five weeks paid annual leave plus statutory Bank Holidays
....Read more...
Electrical Maintenance Engineer – FM Service Provider - Commercial Building – Marble Arch, West London - Temp to Perm - £42,000An exciting opportunity to join an established building services company based in London has arisen! CBW Staffing Solutions are currently recruiting for an Electrical Maintenance Engineer to be based in a commercial office located near Marble Arch working on Landlord services. He or she will be required to carry out planned and reactive building maintenance alongside the maintenance team on site (2 Person Team).Hours of workMonday to Friday - 08:00am to 17:00pm Perm Salary £42,000 per annum Per hour £23 per hour Key duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsRequirementsElectrically qualified - City & Guilds Level 2&3City & Guilds - 18th EditionMust be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient FacingPlease reply with a recent copy of your CV to Katie at Cbw staffing solutions for more Information.....Read more...
Electrical Maintenance Engineer (HVAP) – FM Service Provider - Commercial Building – Hatfield, Hertfordshire - £45,000 – No Call out An exciting opportunity to join an established FM service provider based in Hatfield, Hertfordshire has arisen! CBW Staffing Solutions are currently recruiting an Electrical Maintenance Engineer with a HVAP background to be based in a commercial building near Hatfield, Hertfordshire. He or she will be required to carry out planned and reactive building maintenance alongside the maintenance team on site.The successful candidate will have a strong understanding of Facilities Maintenance and experience working with HVAP systems. In return, the company is offering a competitive salary of £45,000, overtime, further training and a potential route into further career progression. In return, my client is offering a very competitive package including:A basic salary of £45,000No call out25 days holidayCompany Pension SchemeExcellent career progression opportunitiesHours of workMonday to Friday –08:00 am to 17:00 pmKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksHV - switching, , Schedules, switchgear, isolatingUndertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractorsRequirementsElectrically qualified - City & Guilds Level 2&3City & Guilds - 18th EditionCurrent or previous HVAP ticketMust be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient Facing Please send your CV to Alex Denton of CBW Staffing Solutions to avoid missing out on the role !....Read more...
Fabric Engineer - FM Service Provider - Paddington - Up to £35,000Exciting opportunity to work for a leading FM Service Provider situated in Paddington. CBW is currently recruiting for a Fabric Maintenance Engineer to be based on a commercial office complex located at Paddington. The successful candidate will have an all-around understanding of most fabric duties and a proven track record in commercial Fabric building maintenance. Working with the maintenance team on-site, he or she will be required to carry out fabric PPM and reactive maintenance across large blue chip commercial office static site. This will be a permanent role with a salary of up to £35,000. Hours of workMonday to Friday 08.00am to 17.00pm Key duties & ResponsibilitiesAbility to deliver excellent customer serviceTo undertake basic “Fabric duties” which would include touching up paint work, tightening hinges, install/repair blinds, changing locks , making minor repairs to cabinets, desks, and putting together small equipment like chairs etc.To undertake some plumbing activities including but not limited to clearing blockages, attending to burst pipes, replacing components, servicing systems etc.Painting and DecoratingAssist with office moves (minor office churn) including furniture moversLiaising with the contract management teamInvestigating complaints and taking appropriate actionEnsuring feedback is provided to the helpdesk on the progress of M&E jobsCarry out specialist technical and non-technical work as deemed appropriate to the continuing maintenance function on the client portfolioOffer technical support and backup as requiredEnsure all personnel and contractors that may be working in hazardous areas take all safety measures to prevent danger, avoid injury and prevent damage to equipmentUse all relevant tools and equipment within the safety guidelines as necessary for the completion of worksTo ensure the client receives the highest level of service to their assets by carrying out reactive and planned maintenance, minor improvementsEnsure jobs are completed to a high standardAssist Multi-Skilled Engineers where requiredPackage £35,000 basic salary 25 days annual leave Overtime availableInternal & external training Company PensionRequirementsA proven track record in commercial building maintenanceAn understanding of most building fabric duties (Plumbing, Painting, Carpentry, Basic Electrical, etc)Good communication skillsHealth & Safety experienceBasic PC literacy, (Microsoft Word, Excel, Internet, smartphone use)Ability to deliver excellent customer serviceSelf-motivation with the ability to manage tight time constraints and prioritise workload....Read more...
Water Treatment Engineer - FM Service Provider - Commercial Office - Parling on-site – Canary Wharf – Up to £45,000Do you have Water Treatment / Cooling Tower experience?Do you have building maintenance experience?If the answer is yes, then read on...Exciting opportunity to work for an established FM Service provider situated in Canary Wharf, London. CBW are currently recruiting for a Water Treatment Engineer to be based in a blue-chip commercial office space in Canary Wharf. The successful candidate will have a proven track record in water treatment with cooling tower experience. In return the company is offering a competitive salary of up to £45,000, parking on site, overtime and further training.Key ResponsibilitiesDaily, weekly and monthly analytical testing of cooling towers and closed systems.Log Book OwnershipChilled Water systemsCooling tower maintenanceClosed system experienceWater flushingDisinfecting mains water pipes and hot & cold water systems when the need arisesWorking with chemicals such as chemical dosingSurveys on hot and cold water systemsRepairing pipework and leaksSmall plumbing jobs such as dead leg removalCarry out general building maintenanceKnowledge of the following; Calorifiers, Cooling Towers - Disinfection, Circulation pumps, Temp tests, Tank Cleans, Chlorination's, Water softeners, Cold water storage tanks, Dip SlidesHours of workMonday to Friday - 08:00 am to 17:00 pmRequirementsCity and Guilds in Plumbing Cooling Tower ExperienceCity and Guilds in Water Treatment City and Guilds Legionella control within hot and cold water systems Demonstrate previous experience in water system remediation/maintenance worksDemonstrate working knowledge of the respective legislation and guidance materialFully trained and knowledgeIf you are interested in this role please contact Archie Reed from CBW Staffing Solutions!....Read more...
Electrical Maintenance Engineer – FM Service Provider - Government Contract – Lydd, Kent – up to £38,000 + PackageAn exciting opportunity to join an established FM service provider based in Lydd has arisen! CBW Staffing Solutions are currently recruiting an Electrical Maintenance Engineer based on a Government Contract in Lydd, Kent He or she will be required to carry out planned and reactive maintenance across this static site. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in building maintenance. In return, the company is offering a competitive salary of up to £38,000, overtime, further training and a potential route into further career progression. In return, my client is offering a very competitive package including:A basic salary of up to £38,000Plenty of overtime 25 days holiday + Bank HolidaysCompany Pension SchemeExcellent career progression opportunitiesHours of workMonday- Friday 08:00-17:00Key duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsCompliance and logbooksChillers and pressurisation unitsUndertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.RequirementsElectrically qualified - City & Guilds Level 2&3City & Guilds - 18th EditionMust be able to provide copies of your trade certificatesMust go through site clearance checks A proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient Facing Please send your CV to Tom Gotts of CBW Staffing Solutions to avoid missing out on the role !....Read more...
Are you a Civil Infrastructure Engineer looking for an exciting new challenge in London?
This client is looking for a Civil Engineer with Infrastructure experience, and the role comes with an attractive salary and benefits package plus a hybrid working pattern.
This company is an award winning design consultancy who work on some of the most exciting projects all over the world.
What’s on offer
Hybrid working arrangements.Life Assurance.Income Protection.Flexible Benefits – including Cycle scheme, Dental insurance, Optical Cover, Travel insurance and Corporate discounts.Early leaving at the end of the month
The role
Undertaking design from feasibility and option studies through to detailed civil engineering design, striving to see that service and project work are carried out within agreed deadlines and within budgetPreparation of reports to support planning applications and design stage deliverablesPlan and manage CAD documentation of design workPrepare technical specificationsEnsure senior staff are kept informed of important and relevant service/design decisions and the objectives of the company and the client are achieved.
What you need to succeed
A technical background in drainage, roads, earthworks and utilities co-ordinationExperience in working within a multidisciplinary team, or large international projectsBachelors/Masters degreeA desire to work towards Professional registration with a relevant institution.....Read more...
Mechanical Maintenance Engineer – FM Service Provider - Commercial Office – Cannon Street, London – £40,000An exciting opportunity to join an established FM service provider based in Cannon Street, London has arisen! CBW Staffing Solutions are currently recruiting for a Mechanical Maintenance Engineer based in a commercial office building near Cannon Street, London. He or she will be required to carry out planned and reactive building maintenance alongside the maintenance team on site (Team of 6 engineers)The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in Electrical building maintenance. In return, the company is offering a competitive salary of £40,000, overtime, further training and a potential route into further career progression. In return, my client is offering a very competitive package including:A basic salary of £40,000Plenty of overtime 25 days holidayCompany Pension SchemeExcellent career progression opportunitiesHours of work The shift pattern is Monday to Friday 07:00 to 19:00 Earlies are 07:00 to 16:00 Lates are 10:00 to 19:00 Rotating weekly Key Duties & ResponsibilitiesMonitor mechanical plantPumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Units (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toilets, replacing taps, washers etcMonitor the BMS systems.Basic electrical duties (Lamp changes etc)General building fabricEscort specialist subcontractorsRequirementsMechanically qualified level 2 (C&G, NVQ etc)Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skills Please send your CV to Alex Denton of CBW Staffing Solutions to avoid missing out on the role !....Read more...
Design EngineerBurnleyMon-Thurs 08:00-17:15 Fri 08:00-13:00Up to £45,000Design EngineerThe RoleMy client is a leading manufacturer in their field, with a well-established brand in the Precision Engineering sector. You will be based onsite at their global headquarters in Burnley, being responsible for providing technical support, developing new products, and providing continual improvement to current designs. Design EngineerMain Responsibilities
Process new enquires for the design department, ensuring all necessary follow-up action has been adhered to such as enquiry processing, delivery of quotation/design proposal for new contract research and consultancy.Develop close working relationships with clients and ensuring client liaison is continually adhered to.Undertake design and engineering analysis and support including FEA on design projects within the department and as a dedicated service.Development and detail product design and engineering from conceptual design through to detailed design and manufacturing implementation support as required.Undertake project management for projects directed by the Design Director. All project management activity to comply with industry guidelines.Maintain and adhere to ISO 9001.To effectively and efficiently work with Pro-engineer CAD package.To perform stress and strain calculations to recognise formulae and clearly layout workings within MathCAD to allow colleagues to interpret and validate design.To effectively utilise the company MRP system.To perform accurate high quality design output with minimal errors.To perform modifications to existing designs and drawing where necessary.
Design EngineerThe Candidate
Knowledge of fundamental engineering theory in mechanical engineering and product design.Knowledge of 3D CAD modelling systems.Knowledge and experience of Pro-Engineer and MathCAD.Knowledge of manufacturing processes and assembly.Experience in a similar background.Experience designing and manufacturing pressure equipment to the recognised standards.Previous experience dealing directly with customers, preparing technical specifications and presenting proposals.Ability to use Microsoft Office.Ability to use Lotus.Ability to use Mainframe.Ability to use CREO.Ability to use MAGMA.
Please contact Adam Lang at Winsearch UK for further information. Adam Lang - adam.lang@winsearch.uk Winsearch acts as an employment agency for permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services. View our latest jobs today on our website http://www.winsearch.uk and follow us on LinkedIn.Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!
The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https://www.gov.uk/browse/visas-immigration/eu-eea-swiss
Many Thanks....Read more...
Electronics Engineer Consultant – Security Clearance – Cambridge
A new design consultancy, based in Cambridge, are currently looking for a Electronics Engineer Consultant to add to the team of experienced experts, specifically with a focus on security cleared projects.
Although this is a new design consultancy, they have the backing of larger companies meaning you still have the job security of working for a large company. You will also have benefits including pension, share purchase schemes, healthcare, life assurance and other excellent benefits not normally available to smaller organisations.
We are looking for an Electronics Engineer who has ideally worked on MOD, Security Clearance or other sensitive technologies. Due to the nature of consultancy services, your electronics experience could be across a number of fields such as RF Engineering, Microwave Electronics, Analogue Electronics, Sensors Technologies, PCB Electronics or other complex electronics design.
It will also be ideal if you have specific Firmware, Embedded or other software experience.
Due to the nature of work, you must already hold or be able to obtain security clearance.
Apart from the benefits, you will be rewarded with an excellent salary, career opportunities and a continued skills training to keep you at the forefront of technologies.
This is a rare opportunity to be involved with a design consultancy at the ground level, meaning future career development will be more likely than with other consultancies or companies. Due to this, I’m expecting a lot of interest in this role. If you are interested in the role, apply now or risk missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Scientific recruitment specialists Newton Colmore Consulting, on +44 121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications. Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors.
....Read more...
Machine Learning Engineer – Defence Sector – Cambridge
A growing organisation within the Defence Sector, based in Cambridge, is currently seeking a skilled Machine Learning Engineer or Artificial Intelligence Engineer to contribute to the ongoing development of defence, security, and intelligence technologies.
This is an expanding organisation offering intriguing career development opportunities based on success. You will work on a variety of projects, ranging from small individual initiatives to large ongoing projects, where you will collaborate with mechanical engineers, electronics engineers, inventors, scientists, and other industry experts.
Given that you will be working on cutting-edge technologies with potential applications in corporate and national security measures, the ability to obtain security clearance is necessary.
Ideally, you will have experience in Machine Learning or Artificial Intelligence projects spanning several years. While experience in the defence sector would be highly advantageous, it is not a strict requirement.
What makes this organisation truly fascinating is its structure, which enables you to tackle some of the world's most intriguing problems without the bureaucratic hurdles often encountered in larger organisations.
It is expected that you hold a degree that has prepared you for a role in Machine Learning or Artificial Intelligence.
In addition to working on highly challenging and captivating projects, you will receive a competitive salary, bonuses, pension benefits, complimentary meals, health insurance, ongoing skills training, and other outstanding perks.
If you seek daily challenges and the opportunity to work on projects at the forefront of the ML/AI field, we encourage you to apply now, as we anticipate significant interest in this role.
For more information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on 0121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Commercial Catering Engineer
Basic £50k
Door to door pay
Van for personal use
Overtime rates
We are currently looking to recruit an experienced Commercial Catering Engineer to work within our specialist commercial catering department. We support thousands of commercial catering outlets across the country with a varied client base. Many of our satisfied customers have been with us for years, making us the chosen company for many major manufacturers of kitchen equipment UK wide.
Our clients include restaurants, supermarkets, hotels and many other businesses.
As a Commercial Catering Engineer, your key responsibilities will include service, maintenance, repair and fault finding of gas and electric kitchen equipment. This role is field based and will require you to be customer facing as well as meeting clients.
Previous Experience Required
COMCAT 1,3,5 (Essential)
Full Drivers License (Essential)
Relevant experience working on commercial catering equipment
Electrical experience (not required but an advantage)
Package Overview
Competitive basic salary £50,000pa
40 hour working week
Paid door to door
20 Days holiday + 8 bank holidays
Van + Fuel Card (Brand new Peugeot Expert)
Personal use of van
Smart Phone
Uniform and PPE
Bonus Scheme in place for tidy van, part numbers and logging jobs off correctly
Pension
Tablet and phone
On Call 1 in 4 with a standby payment with £100 standby
Weekly overtime paid at your flat rate + weekend overtime rates at time ½
Top up training provided and funded if required.
If you are interested in this position, please send us your CV and we can give you a call for a confidential chat. Alternatively, please feel free to give us a call on 0121 389 0023 or email
Know someone looking for work? Get £100 Amazon vouchers upon completion of probationary period.
....Read more...