You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Bricklayer and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Understand the principles of high quality customer service and communication to enable you to gain and keep a valued reputation in industry with clients, colleagues and industry representatives such as suppliers and manufacturers
Understand the different eras, types of construction methods, insulation considerations, sustainability, facilities management, fire, moisture and air protection, fireplaces and chimneys, damp proof courses and the use of brick ties
Set out and build brickwork, including complex arches and surrounding brickwork, curved on plan, concave and convex brickwork and battered brickwork
Select appropriate tools, equipment and materials (eg trowel, levels, brick ties, DPC, insulation, mixers, lintels etc) for use when setting out and erecting masonry walling . Maintain a clean working environment.
Select materials and resources to be able to set out and lay concrete, drainage and other substructure materials
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship.
Attendance at York College on a block release basis. The qualification achieved will be Bricklayer apprenticeship level 2.
Functional Skills in maths and English to be provided, if required.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday, between 8.00am and 5.00pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Site Carpenter and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Principles of building construction terminology and components, Building Information Modelling (BIM) and environmental and sustainability considerations
Interpreting and producing relevant information from drawings, specifications and work instructions including the basic principles of Computer Aided Design (CAD)
Understand the characteristics, quality, uses, sustainability, limitations and defects associated with timber and timber-based products and components
How to use hand and power tools including portable circular saws, drills, saws, planers, routers, sanders, multi-functional tools and nail guns
How to carry out first fixing work including timber frames and linings, timber coverings, flat roof decking, timber stud partitions, straight flights of stairs and installing handrails and spindles to straight flights of stairs
How to carry out second fixing work including installation of service encasements, cladding, wall and floor units, mouldings, side hung doors and ironmongery
How to create structural carcassing work, how to erect trussed rafter roofs, how to construct gables, verge and eaves, how to install floor joists and coverings
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on block release basis
The qualification achieved will be Carpentry and Joinery Apprenticeship level 2
Training Outcome:
On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level
Apprentices will progress to a wide range of employment opportunities in the workplace
Self-employment or starting a business may also be an option
If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship
Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Monday - Friday between 8.00am and 5.00pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
What to Expect:
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training – where you’ll be earning all the time. At the end of your Intermediate Apprenticeship, you’ll have more experience and valuable job skills, plus a nationally recognised apprenticeship qualification - but that’s just the beginning!
Preparing and fixing building components, from the initial erection of a new building
Installation of all necessary fixtures and fittings
Repair and maintenance activities
Health & Safety on site and work with an experienced mentor who will support your learning
Calculate quality, length, area and wastage of resources
Maintain and repair building components
Work safely at height
Use, maintain and store hand and power tools
Reporting to the Site Manager, you will work with experienced trade specialists towards gaining a nationally recognised apprenticeship qualification through on and off the job, trade specific training
Training:Carpentry and Joinery Level 2 (GCSE), including Functional Skills in English and maths if required.
Block release at SMB Group, Stephenson Campus, Coalville, Leicestershire, LE67 3TN.Training Outcome:If you're as ambitious as we think you are, you could progress to the Advanced Apprenticeship or work for one of our sub-contractors, set yourself up as self-employed or in some areas of the country work for us permanently as a qualified tradesperson.
Some apprentices carry on training once they have completed their advanced apprenticeship and progress through our Assistant Site Manager Programme or go on to do one of our Degree Apprenticeship Programmes. Employer Description:We’ve been nationally recognised as a 5 star housebuilder since 2010 for supplying high-quality homes for all generations. That’s more than any other major housebuilder. It’s because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building. We have tailored opportunities for apprentices, graduates, experienced professionals and ex-Armed Forces personnel to come and help us stay one step ahead, and build the homes that Britain needs.
Barratt adopts a hybrid way of working which assumes that where roles allow, our office-based colleagues divide their time between working in the office, on our construction sites and sales offices, and working from home, as the role dictates. We recognise the many benefits that an effective hybrid working culture brings to both the Company and our colleagues.
We are building an organisation where anyone with drive and talent can pursue the career they want. We are building a culture where anyone, regardless of gender, race, age, sexuality, disability, background or any other characteristic, can progress and be proud to work for us.Working Hours :Monday to Friday 8am - 5pm. Days and shift pattern to be discussed at interview.Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Site Carpenter and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Principles of building construction terminology and components, Building Information Modelling (BIM) and environmental and sustainability considerations
Interpreting and producing relevant information from drawings, specifications and work instructions including the basic principles of Computer Aided Design (CAD)
Understand the characteristics, quality, uses, sustainability, limitations and defects associated with timber and timber-based products and components
How to use hand and power tools including portable circular saws, drills, saws, planers, routers, sanders, multi-functional tools and nail guns
How to carry out first fixing work including timber frames and linings, timber coverings, flat roof decking, timber stud partitions, straight flights of stairs and installing handrails and spindles to straight flights of stairs
How to carry out second fixing work including installation of service encasements, cladding, wall and floor units, mouldings, side hung doors and ironmongery
How to create structural carcassing work, how to erect trussed rafter roofs, how to construct gables, verge and eaves, how to install floor joists and coverings
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on block release basis. The qualification achieved will be Carpentry and Joinery Apprenticeship level 2, including Functional Skills in English and maths if required.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday between 8.00am and 5.00pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Site Carpenter and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Principles of building construction terminology and components, Building Information Modelling (BIM) and environmental and sustainability considerations
Interpreting and producing relevant information from drawings, specifications and work instructions including the basic principles of Computer Aided Design (CAD)
Understand the characteristics, quality, uses, sustainability, limitations and defects associated with timber and timber-based products and components
How to use hand and power tools including portable circular saws, drills, saws, planers, routers, sanders, multi-functional tools and nail guns
How to carry out first fixing work including timber frames and linings, timber coverings, flat roof decking, timber stud partitions, straight flights of stairs and installing handrails and spindles to straight flights of stairs
How to carry out second fixing work including installation of service encasements, cladding, wall and floor units, mouldings, side hung doors and ironmongery
How to create structural carcassing work, how to erect trussed rafter roofs, how to construct gables, verge and eaves, how to install floor joists and coverings
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on block release basis. The qualification achieved will be Carpentry and Joinery Apprenticeship level 2.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked
Monday- Friday
Between 8.00am and 5.00pm (Details to be confirmed)Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Site Carpenter and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Principles of building construction terminology and components, Building Information Modelling (BIM) and environmental and sustainability considerations
Interpreting and producing relevant information from drawings, specifications and work instructions including the basic principles of Computer Aided Design (CAD)
Understand the characteristics, quality, uses, sustainability, limitations and defects associated with timber and timber-based products and components
How to use hand and power tools including portable circular saws, drills, saws, planers, routers, sanders, multi-functional tools and nail guns
How to carry out first fixing work including timber frames and linings, timber coverings, flat roof decking, timber stud partitions, straight flights of stairs and installing handrails and spindles to straight flights of stairs
How to carry out second fixing work including installation of service encasements, cladding, wall and floor units, mouldings, side hung doors and ironmongery
How to create structural carcassing work, how to erect trussed rafter roofs, how to construct gables, verge and eaves, how to install floor joists and coverings
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on block release basis. The qualification achieved will be Carpentry and Joinery Apprenticeship level 2.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Monday - Friday between 8.00am and 5.00pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Site Carpenter and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Principles of building construction terminology and components, Building Information Modelling (BIM) and environmental and sustainability considerations
Interpreting and producing relevant information from drawings, specifications and work instructions including the basic principles of Computer Aided Design (CAD)
Understand the characteristics, quality, uses, sustainability, limitations and defects associated with timber and timber-based products and components
How to use hand and power tools including portable circular saws, drills, saws, planers, routers, sanders, multi-functional tools and nail guns
How to carry out first fixing work including timber frames and linings, timber coverings, flat roof decking, timber stud partitions, straight flights of stairs and installing handrails and spindles to straight flights of stairs
How to carry out second fixing work including installation of service encasements, cladding, wall and floor units, mouldings, side hung doors and ironmongery
How to create structural carcassing work, how to erect trussed rafter roofs, how to construct gables, verge and eaves, how to install floor joists and coverings
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on block release basis. The qualification achieved will be Carpentry and Joinery Apprenticeship level 2.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday between 8.00am and 5.00pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
What to Expect:
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training – where you’ll be earning all the time. At the end of your Intermediate Apprenticeship, you’ll have more experience and valuable job skills, plus a nationally recognised apprenticeship qualification - but that’s just the beginning!
Preparing and fixing building components, from the initial erection of a new building
Installation of all necessary fixtures and fittings
Repair and maintenance activities
Health & Safety on site and work with an experienced mentor who will support your learning
Calculate quality, length, area and wastage of resources
Maintain and repair building components
Work safely at height
Use, maintain and store hand and power tools
Reporting to the Site Manager, you will work with experienced trade specialists towards gaining a nationally recognised apprenticeship qualification through on and off the job, trade specific training
Training:Carpentry and Joinery Level 2 (GCSE), including Functional Skills in English and maths if required.
Block release at SMB Group, Stephenson Campus, Coalville, Leicestershire, LE67 3TN.Training Outcome:If you're as ambitious as we think you are, you could progress to the Advanced Apprenticeship or work for one of our sub-contractors, set yourself up as self-employed or in some areas of the country work for us permanently as a qualified tradesperson.
Some apprentices carry on training once they have completed their advanced apprenticeship and progress through our Assistant Site Manager Programme or go on to do one of our Degree Apprenticeship Programmes. Employer Description:We’ve been nationally recognised as a 5 star housebuilder since 2010 for supplying high-quality homes for all generations. That’s more than any other major housebuilder. It’s because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building. We have tailored opportunities for apprentices, graduates, experienced professionals and ex-Armed Forces personnel to come and help us stay one step ahead, and build the homes that Britain needs.
Barratt adopts a hybrid way of working which assumes that where roles allow, our office-based colleagues divide their time between working in the office, on our construction sites and sales offices, and working from home, as the role dictates. We recognise the many benefits that an effective hybrid working culture brings to both the Company and our colleagues.
We are building an organisation where anyone with drive and talent can pursue the career they want. We are building a culture where anyone, regardless of gender, race, age, sexuality, disability, background or any other characteristic, can progress and be proud to work for us.Working Hours :Monday to Friday 8am - 5pm. Days and shift pattern to be discussed at interview.Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Site Carpenter and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Principles of building construction terminology and components, Building Information Modelling (BIM) and environmental and sustainability considerations
Interpreting and producing relevant information from drawings, specifications and work instructions including the basic principles of Computer Aided Design (CAD)
Understand the characteristics, quality, uses, sustainability, limitations and defects associated with timber and timber-based products and components
How to use hand and power tools including portable circular saws, drills, saws, planers, routers, sanders, multi-functional tools and nail guns
How to carry out first fixing work including timber frames and linings, timber coverings, flat roof decking, timber stud partitions, straight flights of stairs and installing handrails and spindles to straight flights of stairs
How to carry out second fixing work including installation of service encasements, cladding, wall and floor units, mouldings, side hung doors and ironmongery
How to create structural carcassing work, how to erect trussed rafter roofs, how to construct gables, verge and eaves, how to install floor joists and coverings
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on block release basis. The qualification achieved will be Carpentry and Joinery Apprenticeship level 2.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. If you’re as ambitious as we think you are, you may want to continue for a further year with our advanced apprenticeship.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday, between 8.00am and 5.00pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Site Carpenter and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Principles of building construction terminology and components, Building Information Modelling (BIM) and environmental and sustainability considerations
Interpreting and producing relevant information from drawings, specifications and work instructions including the basic principles of Computer Aided Design (CAD)
Understand the characteristics, quality, uses, sustainability, limitations and defects associated with timber and timber-based products and components
How to use hand and power tools including portable circular saws, drills, saws, planers, routers, sanders, multi-functional tools and nail guns
How to carry out first fixing work including timber frames and linings, timber coverings, flat roof decking, timber stud partitions, straight flights of stairs and installing handrails and spindles to straight flights of stairs
How to carry out second fixing work including installation of service encasements, cladding, wall and floor units, mouldings, side hung doors and ironmongery
How to create structural carcassing work, how to erect trussed rafter roofs, how to construct gables, verge and eaves, how to install floor joists and coverings
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on block release basis. The qualification achieved will be Carpentry and Joinery Apprenticeship level 2.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked
Monday- Friday between 8.00am and 5.00pm
(Details to be confirmed)Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Bricklayer and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Understand the principles of high quality customer service and communication to enable you to gain and keep a valued reputation in industry with clients, colleagues and industry representatives such as suppliers and manufacturers
Understand the different eras, types of construction methods, insulation considerations, sustainability, facilities management, fire, moisture and air protection, fireplaces and chimneys, damp proof courses and the use of brick ties
Set out and build brickwork, including complex arches and surrounding brickwork, curved on plan, concave and convex brickwork and battered brickwork
Select appropriate tools, equipment and materials (eg trowel, levels, brick ties, DPC, insulation, mixers, lintels etc) for use when setting out and erecting masonry walling . Maintain a clean working environment
Select materials and resources to be able to set out and lay concrete, drainage and other substructure materials
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on a block release basis.
The qualification achieved will be Bricklayer apprenticeship level 2.
Functional Skills in maths and English to be provided, if required.Training Outcome:
On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level
Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option
Once you’ve completed your Intermediate Apprenticeship, there are plenty more options available to you, including studying at a higher level
Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday between 8.00am and 5.00pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Bricklayer and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Understand the principles of high quality customer service and communication to enable you to gain and keep a valued reputation in industry with clients, colleagues and industry representatives such as suppliers and manufacturers
Understand the different eras, types of construction methods, insulation considerations, sustainability, facilities management, fire, moisture and air protection, fireplaces and chimneys, damp proof courses and the use of brick ties
Set out and build brickwork, including complex arches and surrounding brickwork, curved on plan, concave and convex brickwork and battered brickwork
Select appropriate tools, equipment and materials (eg trowel, levels, brick ties, DPC, insulation, mixers, lintels etc) for use when setting out and erecting masonry walling . Maintain a clean working environment
Select materials and resources to be able to set out and lay concrete, drainage and other substructure materials
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on a block release basis. The qualification achieved will be Bricklayer apprenticeship level 2.
Functional Skills in maths and English to be provided, if required.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. Once you’ve completed your intermediate apprenticeship, there are plenty more options available to you, including studying at a higher level.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday, between 8.00am and 5.00pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Bricklayer and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Understand the principles of high quality customer service and communication to enable you to gain and keep a valued reputation in industry with clients, colleagues and industry representatives such as suppliers and manufacturers
Understand the different eras, types of construction methods, insulation considerations, sustainability, facilities management, fire, moisture and air protection, fireplaces and chimneys, damp proof courses and the use of brick ties
Set out and build brickwork, including complex arches and surrounding brickwork, curved on plan, concave and convex brickwork and battered brickwork
Select appropriate tools, equipment and materials (eg trowel, levels, brick ties, DPC, insulation, mixers, lintels etc) for use when setting out and erecting masonry walling. Maintain a clean working environment
Select materials and resources to be able to set out and lay concrete, drainage and other substructure materials
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on a block release basis. The qualification achieved will be Bricklayer apprenticeship level 2.
Functional Skills in maths and English to be provided, if required.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. Once you’ve completed your Intermediate Apprenticeship, there are plenty more options available to you, including studying at a higher level.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday between 8am and 5pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Bricklayer and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Understand the principles of high quality customer service and communication to enable you to gain and keep a valued reputation in industry with clients, colleagues and industry representatives such as suppliers and manufacturers
Understand the different eras, types of construction methods, insulation considerations, sustainability, facilities management, fire, moisture and air protection, fireplaces and chimneys, damp proof courses and the use of brick ties
Set out and build brickwork, including complex arches and surrounding brickwork, curved on plan, concave and convex brickwork and battered brickwork
Select appropriate tools, equipment and materials (eg trowel, levels, brick ties, DPC, insulation, mixers, lintels etc) for use when setting out and erecting masonry walling . Maintain a clean working environment
Select materials and resources to be able to set out and lay concrete, drainage and other substructure materials
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on a block release basis. The qualification achieved will be Bricklayer apprenticeship level 2.
Functional Skills in maths and English to be provided, if required.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. Once you’ve completed your Intermediate Apprenticeship, there are plenty more options available to you, including studying at a higher level.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday between 8am and 5pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Bricklayer and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Understand the principles of high quality customer service and communication to enable you to gain and keep a valued reputation in industry with clients, colleagues and industry representatives such as suppliers and manufacturers
Understand the different eras, types of construction methods, insulation considerations, sustainability, facilities management, fire, moisture and air protection, fireplaces and chimneys, damp proof courses and the use of brick ties
Set out and build brickwork, including complex arches and surrounding brickwork, curved on plan, concave and convex brickwork and battered brickwork
Select appropriate tools, equipment and materials (eg trowel, levels, brick ties, DPC, insulation, mixers, lintels etc) for use when setting out and erecting masonry walling . Maintain a clean working environment
Select materials and resources to be able to set out and lay concrete, drainage and other substructure materials
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on a block release basis. The qualification achieved will be Bricklayer apprenticeship level 2.
Functional Skills in maths and English to be provided, if required.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. Once you’ve completed your Intermediate Apprenticeship, there are plenty more options available to you, including studying at a higher level.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday, between 8.00am and 5.00pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
What to Expect:
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training – where you’ll be earning all the time. At the end of your Intermediate Apprenticeship, you’ll have more experience and valuable job skills, plus a nationally recognised apprenticeship qualification - but that’s just the beginning!
Preparing and fixing building components, from the initial erection of a new building
Installation of all necessary fixtures and fittings
Repair and maintenance activities
Health & Safety on site and work with an experienced mentor who will support your learning
Calculate quality, length, area and wastage of resources
Maintain and repair building components
Work safely at height
Use, maintain and store hand and power tools
Reporting to the Site Manager, you will work with experienced trade specialists towards gaining a nationally recognised apprenticeship qualification through on and off the job, trade specific training
Training:Carpentry and Joinery Level 2 (GCSE) apprenticeship, including Functional Skills in English and maths if required.
Block release at SMB Group, Stephenson Campus, Coalville, Leicestershire, LE67 3TN.Training Outcome:If you're as ambitious as we think you are, you could progress to the Advanced Apprenticeship or work for one of our sub-contractors, set yourself up as self-employed or in some areas of the country work for us permanently as a qualified tradesperson.
Some apprentices carry on training once they have completed their advanced apprenticeship and progress through our Assistant Site Manager Programme or go on to do one of our Degree Apprenticeship Programmes. Employer Description:We’ve been nationally recognised as a 5 star housebuilder since 2010 for supplying high-quality homes for all generations. That’s more than any other major housebuilder. It’s because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building. We have tailored opportunities for apprentices, graduates, experienced professionals and ex-Armed Forces personnel to come and help us stay one step ahead, and build the homes that Britain needs.
Barratt adopts a hybrid way of working which assumes that where roles allow, our office-based colleagues divide their time between working in the office, on our construction sites and sales offices, and working from home, as the role dictates. We recognise the many benefits that an effective hybrid working culture brings to both the Company and our colleagues.
We are building an organisation where anyone with drive and talent can pursue the career they want. We are building a culture where anyone, regardless of gender, race, age, sexuality, disability, background or any other characteristic, can progress and be proud to work for us.Working Hours :Monday to Friday 8am - 5pm. Days and shift pattern to be discussed at interview.Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Bricklayer and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Understand the principles of high quality customer service and communication to enable you to gain and keep a valued reputation in industry with clients, colleagues and industry representatives such as suppliers and manufacturers
Understand the different eras, types of construction methods, insulation considerations, sustainability, facilities management, fire, moisture and air protection, fireplaces and chimneys, damp proof courses and the use of brick ties
Set out and build brickwork, including complex arches and surrounding brickwork, curved on plan, concave and convex brickwork and battered brickwork
Select appropriate tools, equipment and materials (eg trowel, levels, brick ties, DPC, insulation, mixers, lintels etc) for use when setting out and erecting masonry walling. Maintain a clean working environment
Select materials and resources to be able to set out and lay concrete, drainage and other substructure materials
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on a block release basis. The qualification achieved will be Bricklayer apprenticeship level 2.
Functional Skills in maths and English to be provided, if required.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. Once you’ve completed your Intermediate Apprenticeship, there are plenty more options available to you, including studying at a higher level.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday between 8am and 5pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
Please note: This role involves poolside duties, and you must be a strong swimmer to be considered for an interview. A swim test will be required at the interview stage - details are at the end of this job description.
Everyone Active is a leading UK Leisure Provider and are recruiting Apprenticeships in Leisure Team Member roles, to start a career in the Leisure Industry.
Progression within the company is a core value, and on completion of your apprenticeship you will have plenty of opportunities to progress and develop within the company.
We're looking for enthusiastic people with a willingness to learn who can help achieve our mission of getting our customers to be active 30 minutes a day 5 times a week.
The Leisure Team Member Apprenticeship is a great opportunity to begin your career in the Leisure Industry. As part of your apprenticeship you will gain your National Pool lifeguard Qualification along with other nationally recognised qualifications in leisure.
As part of the 18-month programme you will gain the following qualifications:
National Pool Lifeguard
Level 2 Gym Instructing
Level 1 Assistant Swim Teaching
Level 2 Swim Teaching
Your day-to-day duties with consist of working to ensure the full operations of a Leisure Centre and maintaining all of the required set standards across the organisation. You will be trained to safely operate the pool as part of a team and ensure the safety of the public. As part of your role, you will learn and develop all the skills required to operate the different leisure facilities and activities such as swim and fitness provision. Please be aware, this will also include working on the Reception Desk when required.
This is an exciting opportunity for any candidate who has a drive and commitment to develop a career in the leisure industry. A candidate who is keen to learn and become a valued member of the team with flexible skills and attributes to develop into the future.
This is a full-time position, and you will be required to work on a shift basis at your designated centre. You will be employed on a fixed term contract.
If you are invited to interview for this role you will be required to complete a swim test as part of the interview process, in order to be considered for the role you must be able to demonstrate you are able to do the following:
Jump/dive into deep water
Swim 50 metres in no more than 60 seconds
Swim 100 metres continuously on front and back in deep water and then tread water for 30 seconds
Surface dive to floor of pool (deepest part)
Climb out unaided without ladders/steps
With Everyone Active you will be studying towards your Leisure Team Member Apprenticeship Level 2 Standard over the course of 15-months.Training:Leisure Team Member Apprenticeship Level 2 including Functional Skills in maths and English.Training Outcome:Potential progression to Team Leader and then onto Duty Management training.Employer Description:Sports and Leisure Management Limited (SLM Ltd) is the company behind the Everyone Active brand. The Company is the longest established leisure contractor in the UK having been formed in 1987 by our CEO Stephen Hulme. The Company has seen significant growth over the years and currently manages 93 sports, leisure and cultural facilities in partnership with 34 Local Authority clients.Working Hours :30-hours per week - exact shifts to be confirmed - including early mornings, evenings and weekendsSkills: Team Working,Organisation Skills....Read more...
Please note: This role involves poolside duties, and you must be a strong swimmer to be considered for an interview. A swim test will be required at the interview stage - details are at the end of this job description.
Everyone Active is a leading UK Leisure Provider and are recruiting Apprenticeships in Leisure Team Member roles, to start a career in the Leisure Industry.
Progression within the company is a core value, and on completion of your apprenticeship you will have plenty of opportunities to progress and develop within the company.
We're looking for enthusiastic people with a willingness to learn who can help achieve our mission of getting our customers to be active 30 minutes a day 5 times a week.
The Leisure Team Member Apprenticeship is a great opportunity to begin your career in the Leisure Industry. As part of your apprenticeship you will gain your National Pool lifeguard Qualification along with other nationally recognized qualifications in Leisure.
As part of the 18-month programme you will gain the following qualifications;
National Pool Lifeguard
Level 2 Gym Instructing
Level 1 Assistant Swim Teaching
Level 2 Swim Teaching
Your day to day duties with consist of working to ensure the full operations of a Leisure Centre and maintaining all of the required set standards across the organisation. You will be trained to safely operate the pool as part of a team and ensure the safety of the public. As part of your role you will learn and develop all the skills required to operate the different leisure facilities and activities such as swim and fitness provision. Please be aware, this will also include working on the reception desk when required.
This is an exciting opportunity for any candidate who has a drive and commitment to develop a career in the leisure industry. A candidate who is keen to learn and become a valued member of the team with flexible skills and attributes to develop into the future.
This is a full-time position and you will be required to work on a shift basis at your designated centre. You will be employed on a fixed term contract.
If you are invited to interview for this role you will be required to complete a swim test as part of the interview process, in order to be considered for the role you must be able to demonstrate you are able to do the following:
Jump/dive into deep water
Swim 50 metres in no more than 60 seconds
Swim 100 metres continuously on front and back in deep water and then tread water for 30 seconds
Surface dive to floor of pool (deepest part)
Climb out unaided without ladders/steps
With Everyone Active you will be studying towards your Leisure Team Member Apprenticeship Level 2 Standard over the course of 15 months.Training:Leisure Team Member Apprenticeship L2 including Functional Skills in maths and English.Training Outcome:Potential Progression to Team Leader and then onto Duty Management training.Employer Description:Sports and Leisure Management Limited (SLM Ltd) is the company behind the Everyone Active brand. The Company is the longest established leisure contractor in the UK having been formed in 1987 by our CEO Stephen Hulme. The Company has seen significant growth over the years and currently manages 93 sports, leisure and cultural facilities in partnership with 34 Local Authority clients.Working Hours :30 Hours Per Week - Exact shifts to be confirmed - Including evenings and weekends.Skills: Team Working,Organisation Skills....Read more...
Please note: This role involves poolside duties, and you must be a strong swimmer to be considered for an interview. A swim test will be required at the interview stage - details are at the end of this job description.
Everyone Active is a leading UK Leisure Provider and are recruiting Apprenticeships in Leisure Team Member roles, to start a career in the Leisure Industry.
Progression within the company is a core value, and on completion of your apprenticeship you will have plenty of opportunities to progress and develop within the company. We're looking for enthusiastic people with a willingness to learn who can help achieve our mission of getting our customers to be active 30 minutes a day 5 times a week. The Leisure Team Member Apprenticeship is a great opportunity to begin your career in the Leisure Industry. As part of your apprenticeship, you will gain your National Pool lifeguard Qualification along with other nationally recognised qualifications in Leisure. As part of the 18-month programme you will gain the following qualifications; - National Pool Lifeguard - Level 2 Gym Instructing - Level 1 Assistant Swim Teaching - Level 2 Swim Teaching Your day-to-day duties with consist of working to ensure the full operations of a Leisure Centre and maintaining all of the required set standards across the organisation. You will be trained to safely operate the pool as part of a team and ensure the safety of the public. As part of your role you will learn and develop all the skills required to operate the different leisure facilities and activities such as swim and fitness provision. Please be aware, this will also include working on the Reception Desk when required. This is an exciting opportunity for any candidate who has a drive and commitment to develop a career in the leisure industry. A candidate who is keen to learn and become a valued member of the team with flexible skills and attributes to develop into the future. This is a full-time position, and you will be required to work on a shift basis at your designated centre. You will be employed on a fixed term contract. If you are invited to interview for this role you will be required to complete a swim test as part of the interview process, in order to be considered for the role you must be able to demonstrate you are able to do the following: - Jump/dive into deep water - Swim 50 metres in no more than 60 seconds - Swim 100 metres continuously on front and back in deep water and then tread water for 30 seconds - Surface dive to floor of pool (deepest part) - Climb out unaided without ladders/steps With Everyone Active you will be studying towards your Leisure Team Member Apprenticeship Level 2 Standard over the course of 15 months. Training:Leisure Team Member Apprenticeship L2 including.
Functional Skills in maths and English.Training Outcome:Potential Progression to Team Leader and then onto Duty Management training.Employer Description:Sports and Leisure Management Limited (SLM Ltd) is the company behind the Everyone Active brand. The Company is the longest established leisure contractor in the UK having been formed in 1987 by our CEO Stephen Hulme. The Company has seen significant growth over the years and currently manages 93 sports, leisure and cultural facilities in partnership with 34 Local Authority clients.Working Hours :40 Hours Per Week - Exact Shifts To Be Confirmed - Including Early Mornings, Evenings And WeekendsSkills: Team Working,Organisation Skills....Read more...
As Bar and Waiting Staff at Premium Country Pubs you are the personality behind the beer pumps, the expert on the drink's menu and know our food menu inside out, frequently recommending your favourites. As the friendly face our guests remember, you'll inject your personality every moment you're with our guests so that they love to come back time and time again.
Responsibilities:
Greet, serve and look after our guests
Maintain the highest standards of cleanliness and safety
Work with the team to create a friendly atmosphere our guests will love
Know the menus inside out, making recommendations to our guests
Be a champion of brand standards
You don't even need any experience. So long as you can provide a warm, helpful manner to everyone you meet, we can teach you the ins and outs of working as part of our busy teams.
By taking on a full-time role as a bar and waiting apprentice under the supervision of our passionate teams, not only will you achieve a Level 2 Hospitality Team Member Apprenticeship, you will be able to support the running of our businesses, creating some amazing moments!
What your apprenticeship includes:
A mixture of face to face and skype/phone catch ups every 4 - 6 weeks
A mixture of on and off the job training, including workshops and webinars
Reviews every 12 weeks with the Apprentice, Line Manager and Lifetime Trainer
Feedback sessions to discuss progress
Obtain Functional Skills in English and maths (if you don't already have GCSE)
30 hours paid work every week
Benefits for M&B Staff:
Love eating out? You'll love it even more with a massive 33% discount across all our brands. Whether its date night at Miller & Carter or family roast at Toby Carvery, we've got you covered
Never a dull moment - fun, laughs and lifelong friends
Funded qualification up to degree level
Charity is important to us. From the company charities to the one which is close to your heart; you can choose how to give something back
Enjoy a 33% discount off a cosy stay at our Inn Keepers Lodges
On top of all this, we offer a pension; 28 days paid holiday; high-street shopping discounts; and we even give you free shares
Wage will be:
16-20 year olds: £8.60 per hour
21+ year olds: £11.44 per hour
At Mitchells and Butlers you will be working towards a Hospitality Team Member Level 2 Apprenticeship standard over the course of 15 months.Training:
Hospitality Team Member Apprenticeship - Food and Beverage Service Level 2 including Functional Skills in maths and English
Training Outcome:
Ongoing support and development
Employer Description:You already know Mitchells & Butlers, even if you don't realise it! That's because we run many of the UK's most famous restaurant and pub brands, including: All Bar One, Sizzling Pubs, Vintage Inns, Harvester, Ember Inns, Toby Carvery, Crown Carveries, Castle, Nicholson's, Premium Country Dining Group, O'Neill's, Alex, Village Pub & Kitchen, Miller & Carter, Browns, Innkeeper's Lodge, Orchid Pubs and The Oak Tree.Working Hours :Shift work including bank holidays, evenings and weekends. Exact shifts to be confirmed.Skills: Team Working,Organisation Skills....Read more...
Duties and Responsibilities to include:
Direct, supervise and provide particular support for pupils, including those with special needs, ensuring their safety and access to learning activities
Establish good professional relationships with pupils and interact with them according to individual needs
Promote British values and the inclusion and acceptance of all pupils
Encourage pupils to interact with others and engage in activities led by the teacher
Support pupils who exhibit challenging behaviour by helping them to recognise triggers and implement de-escalation techniques
Deliver intervention programmes to individuals or groups of children
Set challenging and demanding expectations and promote self-esteem and independence
Provide feedback to pupils in relation to progress and achievement under guidance of the teacher
As appropriate, look after sick or upset pupils administering basic first aid as required
Attend to the physical needs of pupils
Supervise pupils during break times and plan and organise activities if required
For the 1-1 support, to aid the pupil to learn as effectively as possible both in group situations and on his/her own by, for example:
To establish supportive relationships with the pupil concerned
To promote the acceptance and inclusion of the pupil with SEN, encouraging pupils to interact with each other in an appropriate and acceptable manner
Clarifying and explaining instructions
Ensuring the pupil is able to use equipment and materials provided
Motivating and encouraging the pupil(s) as required by providing levels of individual attention, reassurance and help with learning tasks as appropriate to pupils’ needs
Using praise, commentary and assistance to encourage the pupil to concentrate and stay on task
Liaising with class teacher, SENCO and other professionals about individual education plans (IEPs), contributing to the planning and delivery as appropriate
Consistently and effectively implementing agreed behaviour management strategies
Helping to make appropriate resources to support the pupil
To give positive encouragement, feedback and praise to reinforce and sustain the pupil’s efforts and develop self-reliance and self-esteem
To support the pupil in developing social skills both in and out of the classroom
To provide regular feedback on the pupil’s learning and behaviour to the teacher/SENCO
To accompany teacher and pupils on educational visits
Training:Teaching Assistant Level 3 Apprenticeship Standard:
Safeguarding training
Working in partnership ith the class teacher to provide excellent learning opportunities for pupils
Experience in other classes
Information sessions eg, SEN, assessment, primary curriculum, etc.
Opportunities to join staff training sessions
Training Outcome:
A permanent position may be offered upon successful completion of the apprenticeship
Ongoing training and support to allow for future career progression, including possible pathways into teaching
Employer Description:At Fairfield, with our friendly and caring atmosphere, we provide day school education for an average of 270 boys and girls aged between 4 and 7 years, including Nursery provision.
There has been a school on this site since 1879 and we are very proud of our beautiful Victorian buildings and £500,000 extension providing a new school entrance, offices and a magnificent hall. Outdoor facilities include a playing field, adventure playground, wildlife area together with spacious hard play areas.Working Hours :Monday - Friday, 8.40am - 11.45am, 12.45pm - 3.10pm with 30 mins lunch time supervision 3 x per week.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Initiative....Read more...
Duties and Responsibilities to include:
Direct, supervise and provide particular support for pupils, including those with special needs, ensuring their safety and access to learning activities
Establish good professional relationships with pupils and interact with them according to individual needs
Promote British values and the inclusion and acceptance of all pupils
Encourage pupils to interact with others and engage in activities led by the teacher
Support pupils who exhibit challenging behaviour by helping them to recognise triggers and implement de-escalation techniques
Deliver intervention programmes to individuals or groups of children
Set challenging and demanding expectations and promote self-esteem and independence
Provide feedback to pupils in relation to progress and achievement under guidance of the teacher
As appropriate, look after sick or upset pupils administering basic first aid as required
Attend to the physical needs of pupils
Supervise pupils during break times and plan and organise activities if required
For the 1-1 support, to aid the pupil to learn as effectively as possible both in group situations and on his/her own by, for example:
To establish supportive relationships with the pupil concerned
To promote the acceptance and inclusion of the pupil with SEN, encouraging pupils to interact with each other in an appropriate and acceptable manner
Clarifying and explaining instructions
Ensuring the pupil is able to use equipment and materials provided
Motivating and encouraging the pupil(s) as required by providing levels of individual attention, reassurance and help with learning tasks as appropriate to pupils’ needs
Using praise, commentary and assistance to encourage the pupil to concentrate and stay on task
Liaising with class teacher, SENCO and other professionals about individual education plans (IEPs), contributing to the planning and delivery as appropriate
Consistently and effectively implementing agreed behaviour management strategies
Helping to make appropriate resources to support the pupil
To give positive encouragement, feedback and praise to reinforce and sustain the pupil’s efforts and develop self-reliance and self-esteem
To support the pupil in developing social skills both in and out of the classroom
To provide regular feedback on the pupil’s learning and behaviour to the teacher/SENCO
To accompany teacher and pupils on educational visits
Training:Teaching Assistant Level 3 Apprenticeship Standard:
Safeguarding training.
Working in partnership with the class teacher to provide excellent learning opportunities for pupils.
Experience in other classes.
Information sessions eg, SEN, assessment, primary curriculum, etc.
Opportunities to join staff training sessions.
Training Outcome:
A permanent position may be offered upon successful completion of the apprenticeship
Ongoing training and support to allow for future career progression, including possible pathways into teaching
Employer Description:At Fairfield, with our friendly and caring atmosphere, we provide day school education for an average of 270 boys and girls aged between 4 and 7 years, including Nursery provision.
There has been a school on this site since 1879 and we are very proud of our beautiful Victorian buildings and £500,000 extension providing a new school entrance, offices and a magnificent hall. Outdoor facilities include a playing field, adventure playground, wildlife area together with spacious hard play areas.Working Hours :Monday - Friday, 8.40am - 11.45am, 12.45pm - 3.10pm with 30 mins lunch time supervision 3 x per week.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Initiative....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Bricklayer and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Understand the principles of high quality customer service and communication to enable you to gain and keep a valued reputation in industry with clients, colleagues and industry representatives such as suppliers and manufacturers
Understand the different eras, types of construction methods, insulation considerations, sustainability, facilities management, fire, moisture and air protection, fireplaces and chimneys, damp proof courses and the use of brick ties
Set out and build brickwork, including complex arches and surrounding brickwork, curved on plan, concave and convex brickwork and battered brickwork
Select appropriate tools, equipment and materials (eg trowel, levels, brick ties, DPC, insulation, mixers, lintels etc) for use when setting out and erecting masonry walling . Maintain a clean working environment.
Select materials and resources to be able to set out and lay concrete, drainage and other substructure materials
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship.
Attendance at York College on a block release basis. The qualification achieved will be Bricklayer apprenticeship level 2.
Functional Skills in maths and English to be provided, if required.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday between 8am and 5pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Site Carpenter and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Principles of building construction terminology and components, Building Information Modelling (BIM) and environmental and sustainability considerations
Interpreting and producing relevant information from drawings, specifications and work instructions including the basic principles of Computer Aided Design (CAD)
Understand the characteristics, quality, uses, sustainability, limitations and defects associated with timber and timber-based products and components
How to use hand and power tools including portable circular saws, drills, saws, planers, routers, sanders, multi-functional tools and nail guns
How to carry out first fixing work including timber frames and linings, timber coverings, flat roof decking, timber stud partitions, straight flights of stairs and installing handrails and spindles to straight flights of stairs
How to carry out second fixing work including installation of service encasements, cladding, wall and floor units, mouldings, side hung doors and ironmongery
How to create structural carcassing work, how to erect trussed rafter roofs, how to construct gables, verge and eaves, how to install floor joists and coverings
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on block release basis. The qualification achieved will be Carpentry and Joinery Apprenticeship level 2.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday between 8.00am and 5.00pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
