JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods. This position also requires application and monitoring of established quality procedures and methods for production batches. Compiles, tabulates and summarizes QC data for analysis. Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality. Maintains statistical records having to do with quality, nature and causes of defects. Expedites and follows up changes to allow for prescribed quality standards. Request raw materials for use in formulas. Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following. Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket. Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms. The employee frequently is required to walk, sit, stoop, kneel and crouch. The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description. The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online!....Read more...
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods. This position also requires application and monitoring of established quality procedures and methods for production batches. Compiles, tabulates and summarizes QC data for analysis. Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality. Maintains statistical records having to do with quality, nature and causes of defects. Expedites and follows up changes to allow for prescribed quality standards. Request raw materials for use in formulas. Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following. Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket. Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms. The employee frequently is required to walk, sit, stoop, kneel and crouch. The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description. The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online!....Read more...
JOB DESCRIPTION
Job Description:
Complete work functions within Chemical production operations Responsible for the quality blending of finished products and the bulk, drum, and pail packaging of products Full understanding of Chemical Hazards specific to area assigned to, including PPE General forklift duties The core responsibility for blending and packaging of products demands the use of mechanical and electrical equipment such as pumps, mixing equipment, and automation control systems Completion and compliance of all safety initiatives and certification requirements including all near miss and incident reporting Accountable for the data entry of production tickets, good receipts, and shipping documentation Daily inspection of work area and monthly document reporting. Ensure that a clean organized work environment is maintained at all times. Assist with physical inventory counts and processes Compliance with all applicable ISO requirements Other duties as assigned by supervisor
Position Requirements:
High school diploma or equivalent Preferred, 2-year Process Technology Degree Good Attendance record Preferred, Manufacturing, Chemical or Technical experience 2+ years Able to Work 12-hour shift: Dupont Schedule, Day and Graveyard rotation Ability to work in the US without sponsorship Preferred, Forklift experience certified
Physical Demands:
Ability to lift and carry 50 lbs, Ability to bend, squat down, and reach above your head throughout the day, Ability to climb stairs and ladders Must be able to wear fall protection, and work at heights. Must be able to wear respirator approx. 2 hours per day and work in confined spaces Forklift experience certified 24 hour Hazwoper Apply for this ad Online!....Read more...
Workshop Manager
Birtley (Durham)
£45,000 - £50,000 + 45 Hour Week + Holidays (Bank Holidays) + Pension + 'immediate Start'
Looking to transition from hands-on work to leadership? This Workshop Manager role offers the perfect opportunity. Join a dynamic company experiencing rapid growth and enjoy a supportive, close-knit environment. Surround yourself with seasoned engineers who have found long-term satisfaction at this company. As Workshop Manager, you'll steer daily operations, managing a team of talented engineers. Your strong communication and organisational skills will enable you to unleash the full potential of your team, ensuring top-notch performance and outstanding outcomes. This company has over 30 years of industry experience and can provide you with job security and stability in a recession proof industry. Enjoy managing and cutting down on the tools work, be a good Workshop Manager with a great company based in Birtley.
Your Role As A Workshop Manager Will Include* Organising workshop workload ensuring customer requirements are met. * Monitor the requirement and authorisation of replacement parts ensuring all parts replacement is authorised by the customer/manufacturer (Warranty/R&M) prior to repair. * Running workshop and organising Engineers
As A Workshop Manager You Will Have:* Experience in commercial vehicle repair and maintenance or a similar service industry. * Basic Electrical Skills * Previous Experience Managing / Supervising A Workshop * Clean Driving Licence
If interested in this role please call Dea Totaj on 07458163032 for more information.
Key words: Engineering Manager, Engineering Supervisor, Production Manager, Production Supervisor, Workshop Manager, Workshop Supervisor, Technical Manager, Depot Manager, Depot Supervisor, Northumberland, Newcastle upon Tyne, Tyne and Wear, Durham, North Yorkshire, Middlesbrough, Darlington, Sunderland, Hartlepool, North Tyneside, Gateshead, Mechanical, Electrical,North East, Birtley, Durham,Washington, Picktree, Concord, Pelton, Lanchester ....Read more...
Job Title: Contract Design Engineer
Duration: Minimum 3 months (with potential for extension)
Location: Leeds or Home based (3 nights away in Surrey onsite)
Hourly Rate: £35-£40 per hour (Outside IR35)
Immediate Start
About Us:
A leading OEM firm specialising in providing innovative automated machines are currently requiring a highly skilled Contract Design Engineer to join our team for a minimum of 3 months to assist with a DEFRA, FGT quotation project. This role offers an immediate start and the opportunity to work on challenging projects in a dynamic environment.
Job Description:
As a Contract Design Engineer, you will be responsible for:
Designing and detailing using Inventor Software.
Producing step files, production drawings, and Bills of Materials (BOMs).
Generating fabrication drawings, including support steelwork, for quotation purposes.
Creating General Arrangements/Layouts.
Conducting stress, loads, and FEA calculations.
Utilising structural or architectural experience for negotiating building drawings.
Conducting site visits with the possibility of overnight stays.
Requirements:
Solid background and experience with Inventor Software.
Proven experience in producing production drawings, fabrication drawings, and BOMs.
Proficiency in stress, loads, and FEA calculations.
Structural or architectural experience is necessary.
Willingness to conduct site visits and potentially stay overnight.
Ability to work both in an office environment and remotely as needed
Benefits:
Competitive hourly rate (£35-£40 per hour).
Immediate start opportunity.
Potential for extension beyond initial 3 months.
Flexibility to work remotely on occasion after initial office-based period.
If you are a talented Contract Design Engineer with a solid background in design and engineering, and you're ready to take on a challenging project....Read more...
FLT driver required to join a market-leading specialist. A fast growing, multi million pound operation looking for an FLT driver to assist with logistics. £11.44 per hour, overtime paid at a premium and with on-site parking. A permanent position that offers continued development and progression opportunities as the company grows.
We are looking for an experienced FLT driver to assist with the receipt, dispatch and storage of goods in our warehouse.
What is on offer to the FLT driver
A starting hourly rate of £12 per hour
8.30 – 5 pm working hours with the opportunity of overtime on weekends
28 days holiday
Pension Scheme
On-site Parking
Genuine career development opportunities
Key Accountabilities of the FLT driver
Responsibility for operating of various machinery including FLT
Helping and supporting the production facility to achieve the set KPI's.
Unloading and collating of finished products
Ensure effective timely delivery of company goods to customers.
To carry out all relevant duties to ensure the delivery vehicles are maintained, cleaned and checked.
To keep all records relevant to vehicles, use. E.g. Drivers log, petrol use and mileage.
Key Experience Required of the FLT driver
In date FLT license
Highly organised
Ideally previous experience working within a fast moving production environment
This role is based in Cononley, Keighley
For immediate consideration for the position, please “click apply” or contact Conor Wood at E3 Recruitment on 01484 645269.
....Read more...
This Maintenance Engineer vacancy offers a salary of £43,500, plus company pension matched, generous holiday allowance and overtime opportunities at x1.5 for those who want it, taking potential earnings to in excess of £50,000
The Maintenance Engineer Vacancy is working with a major international manufacturing business with a large network of UK manufacturing plants across the country and a fantastic reputation. They manufacturer products within a fast-paced automated environment and can offer you an array of training, development, and career progression opportunities, including upskilling and cross skilling .What's in it for you as a Maintenance Engineer?
£45,159 Salary
Monday - Friday working hours
6-2 / 2-10 Shift Pattern
1 in 9 Weekends on call
Company Pension
Roles and Responsibility of Maintenance Engineer:
Responsible for the development of plant wide proactive and reactive mechanical maintenance activities to ensure the optimum performance of the factory
Carry out Planned Preventative Maintenance, Inspections, Service and Repairs on Conveyors, Shafts, Bearings, Hydraulics, Pneumatics
Carry out PPM schedules and Reactive Maintenance Activities as required
To Be Successful as a Maintenance Engineer:
You will need to hold the following qualifications to be considered: City and Guilds Level 3, BTEC & NVQ Level 3, OR Apprentice trained etc in either mechanical and or electrical engineering with a multi-skilled understanding
Direct production line Maintenance Engineering experience
Pre-Planned and reactive industrial production Maintenance experience
In return, you will be offered a truly varied role within a dynamic and a fast-paced business where opportunities to develop your skill sets as a Maintenance Engineer and progress your career with accredited training and development.....Read more...
An exciting opportunity has arisen for a Test Development Engineer - LabVIEW based in Fareham, Hampshire to join a leading manufacturer of complex electronics equipment that is sold into the marine industry all over the world.
As an Test Development Engineer - LabVIEW based in Fareham, you will work in a small team of highly experienced engineers, developing and supporting production test equipment.
You will be responsible for the test equipment from initial specification, through the design, build and installation phases, working closely with all the project disciplines.
Responsibilities also include:
Working closely with the Industrialisation Test Manager and Design Leads to ensure that the test strategy sufficiently exercise products to capture potential manufacturing defects across the complete product working parameters.
Working closely with the industrialisation team, design and produce test equipment that correctly delivers the manufacturing test strategy and is reliable, robust and cost effective.
Developing, producing, and supplying all associated documentation, schedules and training for the test solutions.
Installing the completed test solution into our EMS partners.
The successful Test Development Engineer - LabVIEW based in Fareham will be highly skilled in current versions of National Instruments LabVIEW, preferably qualified to CLD or CLA levels and have significant experience in production test on Radar products.
My client offers superb training and career progression opportunities. If you are looking for a position within a company where you can progress your career while working on some ground-breaking technology, then this is the role for you!
APPLY NOW for the Test Development Engineer - LabVIEW, based in Fareham by emailing your CV to Twilliams@redlinegroup.Com or call Tarah on 01582 878821 if you have any specific questions about this role.....Read more...
Are you ready for a new adventure?
We have a fantastic opportunity for a Senior Financial Accountant for us to join the team here at the Focus Cloud Group.
Who are we?
The Focus Cloud Group are at the forefront of technology, specialising in some of the most influential technologies out there. We have dedicated brands for Microsoft, Workday, SAP, ServiceNow, Salesforce and Dayforce.
Are you up for the challenge?
To flourish in this role, youll need to bring your expertise:
- Fully qualified - ACCA, ACA, CIMA
- Excellent communication skills, with the ability to communicate effectively with all levels
- Dynamic, self-motivated, and a clear communicator with a expertise for tackling complex issues head-on
- Excellent attention to detail with a pragmatic approach
- Good Excel skills with good numeracy and analytical skills
- Good System knowledge - Bullhorn, Cube, ETZ, SAGE, Workday Financials, DayForce
- Comfortable navigating ambiguity, offering innovative solutions, and achieving results
- A collaborative spirit, building strong working relationships inside and outside your team
- A natural tendency to challenge the status quo and explore improved ways of working
What will your role look like?
- Production of GP reporting, commission Calculations and other analysis needed.
- Production of monthly Consolidated management accounts including balance sheet recs and cashflow statements
- Monthly Staff Payroll including P11D computations/PSA Computations/Intermediary reporting for HMRC
- Responsible for Cash, including payments and cashflow forecasts
- Submit all HMRC returns, VAT, PAYE etc
- Lead all statutory and bank audits
What can you expect from us?
- Increasing holiday allowance, starting at 23 days to 27 days after 5 years service
- Your birthday off
- Enhance company pension contribution of 5%
- Private medical cover after successful completion of your probation period
- Enhanced maternity, paternity and adoption leave
- Wellbeing Fridays
- Flexible working, hybrid working of 2 days in the office. Office is Brighton based but will re-locate to Crawley, will need to be able to commute to Crawley.
We cant wait to hear from you, so click Apply now!....Read more...
Are you an experienced Live Streaming engineer or Webcaster looking for an exciting new challenge?
Do you want to work for a vibrant and forward thinking event company?
Free lunch on a Friday sounds good to you?
Creative Personnel have partnered with the events industries next big thing who are looking for a Live Streaming Engineer.
What are we looking for?
We’re looking for an experienced and passionate live streaming professional who is keen to operate as well as coordinate teams to deliver technical solutions across live streaming, AV & video solutions for our clients.
You’ll work directly with the Head of AV, and the production team to provide best-in-class live production solutions for our clients.
You’ll channel your expertise to collaboratively manage and produce in-person, hybrid & virtual events to ensure we deliver a streamlined experience every time, achieving our client’s goals, while providing an outstanding customer experience.
As a Live Streaming Engineer, you'll be at the heart of a fast-growing events team and wider London Filmed team, with plenty of professional growth opportunities.
Whats in it for you?
£30,000 - £40,000 salary per year
Bonus scheme: up to 10% of salary depending on company and individual performance
EMI share options
Extended Christmas holiday and birthday off
Salary reviewed twice a year
Regular professional development opportunities
Regular team socials
Hybrid role - predominantly working in the office or on site. Occasional working-from-home days are offered.
Home office spending allowance
Friday lunch allowance
Monthly wellness allowance
Free daily coffee in the office
If you wish to hear more about this role any other please apply with an updated cv.....Read more...
JOB DESCRIPTION
Quality Control Tech:
The QC Tech works in a production setting ensuring product quality at various stages of processing. Testing product samples is performed using various types of lab equipment. The ability to multi-task and complete testing in a timely manner is essential in order to expedite production. Our QC Tech \"Pay for Skills Program\" is a defined career path that provides opportunity to advance in your position and increase compensation based on skill level. To find out more apply today! Preferred Skills: Quality Control experience is an ISO environment Good math skills. Self-motivated with attention to detail. Excellent communication skills. Accurately enter and retrieve computer data. Ability to solve problems in a team environment. Willing to work overtime as required. Job Type: Full-time Pay: $13.50 - $15.50 per hour. This position is bonus eligible.
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401(k) matching Employee Stock Purchase Plan Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Referral program Tuition reimbursement Vision insurance Pension Schedule: 8-hour shift 1st Shift Monday - Friday,6 am-2:30 pm 2nd Shift, Monday - Friday, 2 pm- 10:30 pm 3rd Shift, Sunday-Thursday, 10 pm- 6:30 am TCI is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online!....Read more...
VACANCY: ELECTRICAL MAINTENANCE ENGINEERLOCATION: MIRFIELD, WEST YORKSHIRESHIFT PATTERN: 2 DAYS, 2 NIGHTS, 4 OFFSALARY: £42000 - £48000Our ClientOur client is a highly successful and growing business based in the heart of West Yorkshire.As part of this continued growth, they seek an experienced, Electrically biased Maintenance Engineer to join their existing team.The roleIn the role of Electrical Maintenance Engineer, you will work both proactively and reactively to minimise downtime and maximise efficient working time within a factory environment, where you will be required to monitor, maintain and repair a variety of production machinery.Duties include:
Proactive and reactive maintenance of production machineryFollow a "CLEAN AS YOU GO" processParticipate in Continuous Improvement ProjectsCommunicate effectively with all departmentsPrioritise workload with breakdowns taking priority over daily tasksRegular checks to ensure all machinery running effectivelyCarry out electrical checks and diagnose faultsThis is not an exhaustive list
About you
Time served Electrical Engineer or have C&G or equivalent qualificationPLC fault finding abilityAble to read schematic diagramsKnowledge of hydraulic & pneumatic systemsManage daily activity via CMMSFollow Health and Safety guidelines at all times
In return the successful Electrical Maintenance Engineer will receive a competitive salary and benefits package coupled with the peace of mind that they are joining a highly successful company.For more information APPLY TODAYAqumen Business Solutions is acting as an Employment Business in relation to this vacancy.....Read more...
General Operative
Paying up to £14 per hour
Daytime shift
0730 - 1630 Mon - thurs
0730 - 1230 Fri
The Role
This is a great opportunity for a General Operative in Loughborough commutable from Leicester, Nottingham and Derby. Paying up to £14 per hour, close to good road and rail networks.
The Company
The successful General Operative will be working for an employer who .
- Is a market leader within the manufacturing industry
- Offers long term secure employment
- Keeps a well run, efficient shop floor
The Candidate
As the successful General Operative you are likely to have experience in the following in
- Applying Mastik to seal products
- Use a Mastik sealant gun
- Multi-tasking in a busy, production environment.
The Person
- Good communication skills
- Willingness to be flexible
- Positive can-do attitude.
Benefits Package
The following benefits are available to the successful General Operative
- Good work life balance (Early finish on a Friday)
- Paying up to £14 per hour
- Job security
- Consistent hours
About Precision People
This General Operative role is posted by Precision Recruitment, specialists in Engineering, Technical, Construction and Sales Recruitment. Operating since 2004, we have placed hundreds of engineers in fantastic new roles. Precision covers the whole spectrum of engineering roles from Welders, Fabricators, CNC Machinists, Panel Wireman up to production managers.
We have many engineering roles around the East Midlands including Leicester, Coventry, Derby, Nottingham, Coalville and Northampton so get in touch today.
Interested?
To apply for the General Operative position, here are your two options:
1. "This is the job for me! When can I start?" - Call now and lets talk through your experience. Ask for Sharon Pickering on 0116 254 5411 between 8am - 5pm.
2. "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know.
Precision People is committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system.....Read more...
Are you an experienced Electrical Design Draughtsman looking for an exciting new job opportunity?
We are currently looking for a Electrical Design Draughtsman to join a growing engineering company based in the Essex area.
As the Electrical Design Draughtsman you will be working alongside the automation technicians to produce the electrical wiring diagrams for the electrical control systems.
KEY DUTIES AND RESPONSIBILITIES:
Your duties as the Electrical Design Draughtsman will be varied however the key duties and responsibilities are as follows:
1. You will be responsible for generating electrical drawings and panel layouts, with supporting electrical
documentation (Bill of Materials, Component Lists, Cable Schedules, Terminal Rail Layouts etc.)
2. You will also be assisting with the ongoing drawing transition from AutoCAD to EPLAN, working with the rest of the Automation Department to agree on methods of working and drawing standards.
3. As the electrical design draughtsman, you will ensure all electrical drawings are updated promptly throughout the lifecycle of the project and shared with all relevant departments.
4. Additionally, you will be maintaining a database of preferred electrical devices to ensure consistency in functional hardware from project to project.
ROLE REQUIREMENTS:
To be successful in your application to this exciting opportunity as the Electrical Design Draughtsman we are looking to identify the following on your profile and past history:
1. In-depth knowledge of EPLAN P8 and Pro Panel 3D is essential for this position.
2. A formal Electrical Engineering Qualification is also required (e.g. apprenticeship)
3. Familiarity with automated production machinery or other similar capital equipment will be highly desirable.
Key Words: Electrical Design Draughtsman | Design Engineering Technician | Automation | Production | Engineer
Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer who are certified by Investors in People for talent development. We therefore welcome applications for any interested parties who fulfil the role requirements for this position. HRS is a company exclusively supporting the science and technology sectors, and is made up of a collaboration of recruitment professionals and scientists. We look forward to helping you with your next career moves.....Read more...
An exciting job opportunity has arisen for a Quality Engineer to join a globally recognised organisation involved within the exciting technology sector of Rugged and Industrial Computers and Integrated Systems, based at their site in Tewkesbury, Gloucestershire.
Due to continued growth my client in Tewkesbury, Gloucestershire is seeking a Quality Engineer to join the Quality team to ensure that products and processes are maintained in line with Business and Customer requirements
Duties of the Quality Engineer job include:
Implementation and management of inspection and certification control plans
In process production part approval using visual and dimensional inspection
Final inspection of completed components or assemblies including signoff.
Manufacturing support to the production areas with reference to quality issues
Ensuring procedures are implemented or updated where appropriate.
Actively support the business with QMS to ISO 9001:2015 certification
Key skills and experience for the Quality Engineer job are:
Previous work experience as a Quality Engineer or similar role, ideally in electronics based product manufacturing environment
In-depth understanding of technical documentation including Engineering drawings
Ability to compose clear and concise reports & documentation
Internal Quality auditing experience to ISO 9001:2015
Experience of quality processes with the Defence industry
Six Sigma experience
Hold UK SC Clearance or have the ability to pass SC Clearance
This is an exciting job opportunity for a Quality Engineer to progress their career with a financially strong progressive mid-sized electronics company that is part of a global group.
To apply for the Quality Engineer job based in Tewkesbury, Gloucestershire please send your CV and covering letter to LPhillips@redlinegroup.Com or for more information contact Lewis Phillips on 01582 878880 or 07961158784.....Read more...
Process and Maintenance EngineerBirchington, Kent – Own transport required due to location£££ Competitive Permanent – Full Time 15:00 – 00:00 Tuesday – SaturdayBenefits:• Competitive Salary – (Unfortunately we are unable to disclose this in our advertising but will discuss on initial call.)• 28 days holiday entitlement + bank holidays! • Company Pension • Free Parking • Private Medical Cover• Company Social Events• Employee Assistance ProgrammeOur client is passionate about delivering the freshest and highest-quality produce to their customers. With a dedication to sustainability, innovation, and excellence, they strive to set the standard for the fresh produce industry. Join the team and be part of a company that values integrity, teamwork, and continuous improvement.They are seeking a dynamic Process and Maintenance Engineer to join the team. This role is critical in ensuring the smooth operation of production equipment, maintaining a commitment to safety, quality, and efficiency.Key Responsibilities:• Maintain production equipment to ensure it meets high standards of safety and efficiency.• Conduct fault finding and repairs on electrical and mechanical components, with a focus on 3 phase motors, circuit fault finding, and safety relay fault finding.• Continuously review production processes and equipment to identify areas for improvement.• Execute planned and preventative maintenance programmes to minimise downtime and optimise performance.• Participate in continuous improvement initiatives to enhance productivity and quality.• Monitor equipment performance against set KPIs and take proactive measures to address any issues.• Uphold health & safety regulations at all times to create a safe working environment.• Collaborate as a member of the Engineering team to contribute to the overall success of the business.Qualifications and Experience:• Solid experience in electrical control and drive circuits. • Display a sound knowledge of PLC systems and an understanding of mechanical and pneumatic systems in line with current legislations - HASAWA, COSHH, PUWER, LOLER, WAHR and Electricity at Work Act. • Be self-motivated and able to prioritise in a fast-paced environment. • A high degree of craftsmanship and attention to detail. • Previous experience of working within a food processing environment would also be beneficial. • 1-2 years’ experience is preferable. • A minimum of HNC/NVQ Level 3 or equivalent in an electrical biased engineering discipline or completed an engineering apprenticeship. • Be fully qualified in 17th edition.Westin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment AgencyDue to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion.Do not hesitate to contact us about this or any other roles.....Read more...
JOB DESCRIPTION
Euclid Chemical is looking for Operator Assistants that are reliable, motivated and understand how their efforts impact critical areas of production.
Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies. For more than 110 years, Euclid Chemical has supplied construction and restoration markets with treatments, sealants, coatings, sealers, and decorative products. Euclid Chemical offers a world-class benefits package that includes but is not limited to: Competitive Wages Employee Bonus/Profit-Sharing Plan Defined Benefit Pension Plan Matching 401k Medical, dental and vision coverage Life Insurance Generous vacation and holiday time
Main Duties and Responsibilities:
The Extrusion Helper assists Extrusion Operators as needed with line operation; die head changes, monitoring line controls, and making any adjustments as needed. Operate Accumulator and Twister Machines for making bobbins of Fiber Threading accumulator and twisters of fiber from end of extrusion line to equipment Operate machine within operating procedure and adjust equipment settings as appropriate Doffing of 18# bobbins off twister approximately every 13 minutes Palletize bobbins Keep Machine clean and free of debris Extrusion Lines 4, 5 & 6 Pull tow (fiber ends) while operator is threading the line Coil fiber ends while operator is tying fiber ends to fiber ends in accumulator Separating fiber ends in combs once extrusion line is in production Extrusion Lines 2 & 3 Pull sheet while operator is threading the line and the Cutter . Tying fiber ends in after line is in production Pack down cut fiber in Gaylord boxes Extrusion Line 1 Assist operator in pulling fibers from spin beams to first roll stand Pull tow while operator threads tow into Cutter. Housekeeping Sweeping Trash disposal Prompt Response to Extruder Line HELP Audible Alarms Forklift Operation Adherence to established safety procedures
Education & Experience:
High School Diploma or General Education Degree; or up to one month related experience or training. Previous experience working within manufacturing environment Previous experience with fork-lift operation
Physical Demands:
Daily standing, walking, using hands to finger, handle, or feel, and reaching with hands and arms. Occasional climbing or balancing, stooping, kneeling, crouching, or crawling, and talking and/or hearing. Frequent lifting of up to 50 lbs.
Work Environment:
Frequent exposure to working near moving mechanical parts. The noise level for this job is moderate.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online!....Read more...
JOB DESCRIPTION
Specific Requirements:
Stages and prepares all raw materials associated with production batches. Maintains orderliness and cleanliness in batch making area and proper storage of batch area inventories. Communicates low levels of raw materials to the Plant Supervisor. Develops a thorough knowledge of raw material storage tanks, valving and piping, their contents, actuation and directions of flow. Maintains a good working relationship with Quality Control. Must be capable of logical structuring of the batch making process, particularly optimization of mixer usage and efficiency. Reports all spills and leaks, equipment malfunction, safety hazards, accidents, near-miss accidents and material shortages immediately to the Production Supervisor. Acknowledges and understands the hazards and safety precautions required for working with inorganic metal-based powdered pigments and modifies work and hygiene practices accordingly.
The above description identifies only the primary duties pertaining to this position. Additional tasks are performed, as required, and do not significantly alter this description.
Background Requirements:
High School Diploma with some college level chemistry preferred. Minimum 2 years prior related experience or 1 year experience as a production batch maker. Must pass standard eye exam (corrected or uncorrected) and must pass standard color-tone testing. Must be capable of wearing Company standard respirators as qualified by a fit test performed by an authorized agency.
Physical Requirements:
Lifting up to 50 pounds. Stooping, bending, squatting up to 50% of the time. Standing and walking up to 90% of the time. Sitting - None.
Benefits: 401k w/ company match after 6 months, Pension Plan, Medical/Dental/Vision Insurance, flexible schedule, life insurance, tuition reimbursement
ABOUT US
DO WE HAVE WHAT YOU'RE LOOKING FOR? Our Construction Management Group works closely with our direct US sales team of over 150.
We provide a competitive base salary, bonus package, solid health coverage, 401K and pension plan, plus an expense package including car allowance.
You will also receive on-going training, administrative support, technical service and R&D support along with encouragement, recognition and opportunities for growth. And we stand behind our 90 year old Stonhard name and our brands.
DO YOU SEE YOURSELF WORKING WITH US? LET'S GET STARTED.
The Stonhard Group is part of RPM, International (NYSE: RPM) is headquartered in Maple Shade, NJ and has more than 95 years of experience manufacturing and installing high performance, seamless floors throughout the world. We manufacture and install long-term floor, wall and lining solutions to markets including, but not limited to: food & beverage, general manufacturing, pharmaceutical, chemical processing, education, healthcare, government, technology and hospitality. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class.Apply for this ad Online!....Read more...
Process and Maintenance EngineerBirchington, Kent – Own transport required due to location£££ Competitive Permanent – Full Time 15:00 – 00:00 Tuesday – SaturdayBenefits:• Competitive Salary – (Unfortunately we are unable to disclose this in our advertising but will discuss on initial call.)• 28 days holiday entitlement + bank holidays! • Company Pension • Free Parking • Private Medical Cover• Company Social Events• Employee Assistance ProgrammeOur client is passionate about delivering the freshest and highest-quality produce to their customers. With a dedication to sustainability, innovation, and excellence, they strive to set the standard for the fresh produce industry. Join the team and be part of a company that values integrity, teamwork, and continuous improvement.They are seeking a dynamic Process and Maintenance Engineer to join the team. This role is critical in ensuring the smooth operation of production equipment, maintaining a commitment to safety, quality, and efficiency.Key Responsibilities:• Maintain production equipment to ensure it meets high standards of safety and efficiency.• Conduct fault finding and repairs on electrical and mechanical components, with a focus on 3 phase motors, circuit fault finding, and safety relay fault finding.• Continuously review production processes and equipment to identify areas for improvement.• Execute planned and preventative maintenance programmes to minimise downtime and optimise performance.• Participate in continuous improvement initiatives to enhance productivity and quality.• Monitor equipment performance against set KPIs and take proactive measures to address any issues.• Uphold health & safety regulations at all times to create a safe working environment.• Collaborate as a member of the Engineering team to contribute to the overall success of the business.Qualifications and Experience:• Solid experience in electrical control and drive circuits. • Display a sound knowledge of PLC systems and an understanding of mechanical and pneumatic systems in line with current legislations - HASAWA, COSHH, PUWER, LOLER, WAHR and Electricity at Work Act. • Be self-motivated and able to prioritise in a fast-paced environment. • A high degree of craftsmanship and attention to detail. • Previous experience of working within a food processing environment would also be beneficial. • 1-2 years’ experience is preferable. • A minimum of HNC/NVQ Level 3 or equivalent in an electrical biased engineering discipline or completed an engineering apprenticeship. • Be fully qualified in 17th edition.Westin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment AgencyDue to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion.Do not hesitate to contact us about this or any other roles.....Read more...
Process and Maintenance EngineerBirchington, Kent – Own transport required due to location£££ Competitive Permanent – Full Time 15:00 – 00:00 Tuesday – SaturdayBenefits:• Competitive Salary – (Unfortunately we are unable to disclose this in our advertising but will discuss on initial call.)• 28 days holiday entitlement + bank holidays! • Company Pension • Free Parking • Private Medical Cover• Company Social Events• Employee Assistance ProgrammeOur client is passionate about delivering the freshest and highest-quality produce to their customers. With a dedication to sustainability, innovation, and excellence, they strive to set the standard for the fresh produce industry. Join the team and be part of a company that values integrity, teamwork, and continuous improvement.They are seeking a dynamic Process and Maintenance Engineer to join the team. This role is critical in ensuring the smooth operation of production equipment, maintaining a commitment to safety, quality, and efficiency.Key Responsibilities:• Maintain production equipment to ensure it meets high standards of safety and efficiency.• Conduct fault finding and repairs on electrical and mechanical components, with a focus on 3 phase motors, circuit fault finding, and safety relay fault finding.• Continuously review production processes and equipment to identify areas for improvement.• Execute planned and preventative maintenance programmes to minimise downtime and optimise performance.• Participate in continuous improvement initiatives to enhance productivity and quality.• Monitor equipment performance against set KPIs and take proactive measures to address any issues.• Uphold health & safety regulations at all times to create a safe working environment.• Collaborate as a member of the Engineering team to contribute to the overall success of the business.Qualifications and Experience:• Solid experience in electrical control and drive circuits. • Display a sound knowledge of PLC systems and an understanding of mechanical and pneumatic systems in line with current legislations - HASAWA, COSHH, PUWER, LOLER, WAHR and Electricity at Work Act. • Be self-motivated and able to prioritise in a fast-paced environment. • A high degree of craftsmanship and attention to detail. • Previous experience of working within a food processing environment would also be beneficial. • 1-2 years’ experience is preferable. • A minimum of HNC/NVQ Level 3 or equivalent in an electrical biased engineering discipline or completed an engineering apprenticeship. • Be fully qualified in 17th edition.Westin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment AgencyDue to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion.Do not hesitate to contact us about this or any other roles.....Read more...
Process and Maintenance EngineerBirchington, Kent – Own transport required due to location£££ Competitive Permanent – Full Time 15:00 – 00:00 Tuesday – SaturdayBenefits:• Competitive Salary – (Unfortunately we are unable to disclose this in our advertising but will discuss on initial call.)• 28 days holiday entitlement + bank holidays! • Company Pension • Free Parking • Private Medical Cover• Company Social Events• Employee Assistance ProgrammeOur client is passionate about delivering the freshest and highest-quality produce to their customers. With a dedication to sustainability, innovation, and excellence, they strive to set the standard for the fresh produce industry. Join the team and be part of a company that values integrity, teamwork, and continuous improvement.They are seeking a dynamic Process and Maintenance Engineer to join the team. This role is critical in ensuring the smooth operation of production equipment, maintaining a commitment to safety, quality, and efficiency.Key Responsibilities:• Maintain production equipment to ensure it meets high standards of safety and efficiency.• Conduct fault finding and repairs on electrical and mechanical components, with a focus on 3 phase motors, circuit fault finding, and safety relay fault finding.• Continuously review production processes and equipment to identify areas for improvement.• Execute planned and preventative maintenance programmes to minimise downtime and optimise performance.• Participate in continuous improvement initiatives to enhance productivity and quality.• Monitor equipment performance against set KPIs and take proactive measures to address any issues.• Uphold health & safety regulations at all times to create a safe working environment.• Collaborate as a member of the Engineering team to contribute to the overall success of the business.Qualifications and Experience:• Solid experience in electrical control and drive circuits. • Display a sound knowledge of PLC systems and an understanding of mechanical and pneumatic systems in line with current legislations - HASAWA, COSHH, PUWER, LOLER, WAHR and Electricity at Work Act. • Be self-motivated and able to prioritise in a fast-paced environment. • A high degree of craftsmanship and attention to detail. • Previous experience of working within a food processing environment would also be beneficial. • 1-2 years’ experience is preferable. • A minimum of HNC/NVQ Level 3 or equivalent in an electrical biased engineering discipline or completed an engineering apprenticeship. • Be fully qualified in 17th edition.Westin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment AgencyDue to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion.Do not hesitate to contact us about this or any other roles.....Read more...
Technician required with soldering skills who is confident in reading build instructions of Electronic PCB based devices.
The ideal candidate will have fine or micro soldering experience getting difficult devices onto and off PCBs and knowledge of electronic fault-finding or troubleshooting.
This is a varied Electronic Technician role within an established team so in addition to PCB component soldering assembly and production you would also get involved with PCB and whole product testing including working with Research and Development teams on how prototypes behave: in the oven, EMC testing, dunk in a bucket of water etc.
Full driving license is essential for this role!....Read more...
We are seeking a qualified Production Quality Manager to join our team and ensure the delivery of high-quality products while maintaining compliance with industry standards. The ideal candidate will have a technical or engineering background and a minimum of 5 years of experience in a manufacturing or operations role, with a focus on leading quality and compliance processes. They should possess expertise in risk management, including FEMA, as well as familiarity with standards such as BS EN ISO 9001:2015 and BS EN ISO 13485:2016. Additionally, experience in conducting audits, knowledge of EMC requirements, and proficiency in tools like SharePoint, Confluence, and Jira are desirable. ....Read more...
Gundrilling Operative
Salary: £26k
Location: Andover
We are currently recruiting on behalf of a well-established precision engineering company in the Andover area, who are looking for a Gundrilling Operative to join their growing team and increased production capabilities.
Gundrilling Operative responsibilities:
- Operating machinery to deliver quality products to fine tolerances.
- Ensuring the quality of product matches to Engineering drawings.
Gundrilling Operative requirements:
- Experience of working within an Engineering or Manufacturing environment would be preferred.
- Working diligently to achieve batch targets both individually and as a team.
If you are interested in the Gundrilling Operative role, please contact Harry Parsons on 07739277675 or via email at harry.parsons@holtengineering.co.uk.....Read more...
As a Facilities Technician, your main duty is to maintain facilities and production operations efficiently. You'll perform planned maintenance, repairs, and assist in projects to keep facilities running smoothly. Your role includes:
Responsibilities:
Swiftly address and resolve equipment and building issues.
Assist in projects that need facilities support, like new installations, modifications, and commissioning.
Demonstrate practical expertise in areas like carpentry, electrical work, HVAC, plumbing, and more.
Maintain buildings by decorating, painting, and making minor repairs.
Perform fabrication and welding for repairs and new projects.
Keep tools and equipment in good condition and well-organized.
Minimum Requirements:
Basic knowledge of plumbing, carpentry, and fabrication....Read more...
