Electrical Maintenance Oil and Gas Electrical Engineer with 3phase knowledge required to perform Engineering Maintenance on offshore equipment but this is an onshore role. You will work on various electrical equipment ranging from oil platform cabins including fire and gas panels, power distribution panels, emergency lights, transformers, Uninterruptible Power Supplies, Diesel Powerpacks, drilling control panels, generators and diesel Engines and various drilling downhole equipment. The equipment is typically both Electrical and Mechanical you will also be involved in repairing, maintaining and preparing equipment for international offshore Jack Up Rigs, Semi Submersible Rigs and Well Intervention Vessels. ....Read more...
Electrical Maintenance Oil and Gas Electrical Engineer with 3phase knowledge required to perform Engineering Maintenance on offshore equipment but this is an onshore role. You will work on various electrical equipment ranging from oil platform cabins including fire and gas panels, power distribution panels, emergency lights, transformers, Uninterruptible Power Supplies, Diesel Powerpacks, drilling control panels, generators and diesel Engines and various drilling downhole equipment. The equipment is typically both Electrical and Mechanical you will also be involved in repairing, maintaining and preparing equipment for international offshore Jack Up Rigs, Semi Submersible Rigs and Well Intervention Vessels. ....Read more...
Oil and Gas drilling equipment Reliability Engineer required: this role would be a good fit for a Field Maintenance Technician looking to be onshore.
In this role you will be part of a hands on team preparing Oil and Gas equipment for offshore and land operations.
You will
Verify the status of equipment certifications and calibrations.
Perform or assist in final function testing such as calibration, inspection, certification or verification, which may include Wireline Operational Combination Check, pressure test, measurement calibration, metrological inspection.
Prepare equipment and associated critical spares for shipment and staging to a pre-determined location or loading zone.
Load equipment onto trucks in the absence of base or operational planning support, or the Equipment Readiness Operator or Technician.
....Read more...
Oil and Gas drilling equipment Reliability Engineer required: this role would be a good fit for a Field Maintenance Technician looking to be onshore.
In this role you will be part of a hands on team preparing Oil and Gas equipment for offshore and land operations.
You will
Verify the status of equipment certifications and calibrations.
Perform or assist in final function testing such as calibration, inspection, certification or verification, which may include Wireline Operational Combination Check, pressure test, measurement calibration, metrological inspection.
Prepare equipment and associated critical spares for shipment and staging to a pre-determined location or loading zone.
Load equipment onto trucks in the absence of base or operational planning support, or the Equipment Readiness Operator or Technician.
....Read more...
My client is looking for an experienced Mechanical Design Engineer to join their MCAD Design team.
The successful can candidate will work in ProE and AutoCAD on novel solutions for subsea and other high pressure Oil & Gas systems.
My client is looking for an experienced Mechanical Design Engineer to join their MCAD Design team.
The successful can candidate will work in ProE and AutoCAD on novel solutions for subsea and other high pressure Oil & Gas systems.
As a Junior Wireline Engineer, you will play a vital role in the oil and gas industry, specifically in wireline operations. Working as part of a dynamic team, you will assist in the planning, preparation, and execution of wireline interventions and data acquisition services.
Key Responsibilities:
Assist in the planning and preparation of wireline operations, including tool selection, equipment mobilization, and logistics coordination.
Assist in rigging up and rigging down wireline units, ensuring proper installation and securing of equipment.
Operate wireline tools and instruments under the supervision of senior engineers, adhering to standard operating procedures.
Participate in safety meetings and drills, reporting any potential hazards or incidents promptly.
Participate in training programs to enhance technical knowledge, operational skills, and
understanding of wireline tools and technologies.
Qualifications and Skills:
Bachelor's degree in Petroleum Engineering, Mechanical Engineering, or a related field is preferred.
Knowledge of wireline operations, tools, and techniques is advantageous but not mandatory for a junior role.
Familiarity with oil and gas industry practices, safety standards, and regulatory requirements.....Read more...
As a Junior Wireline Engineer, you will play a vital role in the oil and gas industry, specifically in wireline operations. Working as part of a dynamic team, you will assist in the planning, preparation, and execution of wireline interventions and data acquisition services.
Key Responsibilities:
Assist in the planning and preparation of wireline operations, including tool selection, equipment mobilization, and logistics coordination.
Assist in rigging up and rigging down wireline units, ensuring proper installation and securing of equipment.
Operate wireline tools and instruments under the supervision of senior engineers, adhering to standard operating procedures.
Participate in safety meetings and drills, reporting any potential hazards or incidents promptly.
Participate in training programs to enhance technical knowledge, operational skills, and
understanding of wireline tools and technologies.
Qualifications and Skills:
Bachelor's degree in Petroleum Engineering, Mechanical Engineering, or a related field is preferred.
Knowledge of wireline operations, tools, and techniques is advantageous but not mandatory for a junior role.
Familiarity with oil and gas industry practices, safety standards, and regulatory requirements.....Read more...
Mobile Commercial Gas Engineer – London & M25 - Up to £45,000Are you a Mobile Commercial Gas looking for a new challenge?Would you like to work for a family run Facilities Maintenance provider?An exciting opportunity to join an established Family run Building Services company based across parts London & M25CBW Staffing Solutions are currently recruiting for a Mobile Commercial Gas Engineer to carry out planned and reactive commercial maintenance across Commercial and High End Residential contracts based in London & M25 to join and expanding business. The successful candidate will have a strong understanding of Facilities Maintenance and have proven track record in commercial building maintenance. The engineer will be required to be in London most of the time with a large amount of their contracts based in Kensington, Battersea and Knightsbridge. This position would be ideal for a Mobile Commercial gas engineer currently in a similar position who is keen on progression. In return the company are offering a competitive salary up to £45,000 with a potential route into further career progression.The successful candidate will be GasSafe commercial gas qualified with COCN1 or CODNCO1 as minimum. Extensive experience in commercial building maintenance is essential including Gas and Air conditioning in particular. Experience or qualifications in other disciplines is essential such as electrical, mechanical or Air conditioning. Experience in Oil, LPG and Biomas tickets would be advantageous. The ideal candidate will have experience in boilers, burners and boosters.RequirementsCommercial GasSafe qualifications, COCN1/CODNCO1 minimumGood commercial gas maintenance knowledgeElectrical knowledgeExtensive experience working within a commercial environmentsBuilding services knowledge with ideally electrical qualifications but not essentialPackageBasic Salary of up to £45,000Call OutMonday – Friday 08:00am – 17:00pm24 days holiday + Bank HolidaysCompany Van & Fuel CardTablet & Work Phone ProvidedFull company uniformPlease send your CV to Dan Barber on at CBW Staffing Solutions for more information....Read more...
My client is looking for an experienced Mechanical Design Engineer to join their high Engineering Mechanical Design team in Gloucester.
Key skills and responsibilities
Mechanical CAD design, quality control (use of tolerance, inspection), engineering product file structure, setting up of a project (BDR), creating test and inspection reports.
Read, understand and generate technical instructions, material lists, mechanical drawings, and hydraulic diagrams.
Ability to read and interpret basic instructions for the assembly of materials, technical specifications, testing equipment, part numbers, and write capping and crushing targets.
Recording and filing test reports, creating BOM???s, ECN???s, Requests for Engineering Action (REA), maintaining existing product line and mechanical drafting standards.
Design calculations (burst, collapse & tensile etc.), types and uses of threads and pressure seals, material selection and properties, hydraulic principles, and manufacturing processes.
This is a fantastic opportunity that would suit a Design Engineer from the Oil & Gas, Aerospace, Automotive or similar industries.....Read more...
My client is looking for an experienced Mechanical Design Engineer to join their high Engineering Mechanical Design team in Gloucester.
Key skills and responsibilities
Mechanical CAD design, quality control (use of tolerance, inspection), engineering product file structure, setting up of a project (BDR), creating test and inspection reports.
Read, understand and generate technical instructions, material lists, mechanical drawings, and hydraulic diagrams.
Ability to read and interpret basic instructions for the assembly of materials, technical specifications, testing equipment, part numbers, and write capping and crushing targets.
Recording and filing test reports, creating BOM???s, ECN???s, Requests for Engineering Action (REA), maintaining existing product line and mechanical drafting standards.
Design calculations (burst, collapse & tensile etc.), types and uses of threads and pressure seals, material selection and properties, hydraulic principles, and manufacturing processes.
This is a fantastic opportunity that would suit a Design Engineer from the Oil & Gas, Aerospace, Automotive or similar industries.....Read more...
Proposals Engineer required to take responsibility for the end to end proposal process including, quotations, bid and tender response.
Key skills
HNC, HND or Degree in Electronic or Electrical Engineering or Process, Mechanical Engineering or equivalent practical experience.
Familiarity with Commercial and Technical review processes ideally in an Oil and Gas technical sales role.
IT skills, Microsoft Office, Word and Excel.
Control systems DCS or SCADA or PLC.
Drawing packages such as AutoCAD and MS Visio.
Customer focus on internal and external customers.
Responsibilities
Preparation of Engineering proposals for products and services.
Interpretation of external technical specifications into a compliant technical proposal.
Price propositions within companies??? strategies on sales and marketing, charge out rates and engineering resources.
Single point of contact for client. ....Read more...
Proposals Engineer required to take responsibility for the end to end proposal process including, quotations, bid and tender response.
Key skills
HNC, HND or Degree in Electronic or Electrical Engineering or Process, Mechanical Engineering or equivalent practical experience.
Familiarity with Commercial and Technical review processes ideally in an Oil and Gas technical sales role.
IT skills, Microsoft Office, Word and Excel.
Control systems DCS or SCADA or PLC.
Drawing packages such as AutoCAD and MS Visio.
Customer focus on internal and external customers.
Responsibilities
Preparation of Engineering proposals for products and services.
Interpretation of external technical specifications into a compliant technical proposal.
Price propositions within companies??? strategies on sales and marketing, charge out rates and engineering resources.
Single point of contact for client. ....Read more...
The Senior Well Engineer required to take responsibility for sea oil rig well engineering. You will have operations knowledge of: well design, rig operations, performance management and optimisaiton. You will supervise and mentor more junior Well Engineers and provide technical leadership.
Skills and experience
Well Engineering and Integrated Performance Management.
Well Construction Services (IPM - WCS).
Well Engineering Team Leadership managing land or sea rigs.
The ideal candidate will have experience
Planning, Executing and Evaluating Vertical, Directional (J-Shape, S-Shape) and Horizontal Deep Gas Wells (up to 5000' lateral section) with 2,000 HP Rigs (ADC). Monobore (cemented liner), MSF (Multi Stage Fracturing) and Sand Screen lower completion type. With knowledge of Khuff and Pre-Khuff reservoir formations.
Chemical Engineering, Wireline, Senior Field Engineer then General Field Engineer would be a very relevant career background.
Responsibilities
Well Proposal and Basis of Design.
Programs and End-of-Well reports.
Reviews and approves well operations procedures e.g. Casing running and cementing.
Participate in well performance reviews to ensure focus on increased ft/day and reduced flat time.
Take active role in Drilling TIC projects as assigned.
Reviews performance trends including NPT across all rigs.
....Read more...
The Senior Well Engineer required to take responsibility for sea oil rig well engineering. You will have operations knowledge of: well design, rig operations, performance management and optimisaiton. You will supervise and mentor more junior Well Engineers and provide technical leadership.
Skills and experience
Well Engineering and Integrated Performance Management.
Well Construction Services (IPM - WCS).
Well Engineering Team Leadership managing land or sea rigs.
The ideal candidate will have experience
Planning, Executing and Evaluating Vertical, Directional (J-Shape, S-Shape) and Horizontal Deep Gas Wells (up to 5000' lateral section) with 2,000 HP Rigs (ADC). Monobore (cemented liner), MSF (Multi Stage Fracturing) and Sand Screen lower completion type. With knowledge of Khuff and Pre-Khuff reservoir formations.
Chemical Engineering, Wireline, Senior Field Engineer then General Field Engineer would be a very relevant career background.
Responsibilities
Well Proposal and Basis of Design.
Programs and End-of-Well reports.
Reviews and approves well operations procedures e.g. Casing running and cementing.
Participate in well performance reviews to ensure focus on increased ft/day and reduced flat time.
Take active role in Drilling TIC projects as assigned.
Reviews performance trends including NPT across all rigs.
....Read more...
Quality Engineer required to work on the direction, resources and support relating to Electromechanical manufacturing quality and service delivery of downhole oil and gas devices.
Key skills
Electromechanical, mechanical and/or electronic production experience ideally for high value ??? low volume complex devices.
SAP experience an advantage
Auditing experience and ISO 9001:2015 background
Role Responsibilities
Develop quality program status indicators and performance measurements.
Quality issues and performance metric analysis,
Audit processes internally and at suppliers, remedying work plans.
Develop and implement internal Quality Control Plans (QCP).
Ensure QC requirements and QA tasks are completed before tool or product is shipped.
Develop, implement and maintain procedures for inspections and testing in compliance with the Quality Management System (QMS).
Contribute to Quality Improvement Plans internally and with suppliers.
Utilize statistical quality tools and techniques to lower total quality costs.
Create and classify Product Quality (PQ) incident reports. Lead and coordinate PQ investigations.
Ensure compliance to internal and external management systems.....Read more...
Quality Engineer required to work on the direction, resources and support relating to Electromechanical manufacturing quality and service delivery of downhole oil and gas devices.
Key skills
Electromechanical, mechanical and/or electronic production experience ideally for high value ??? low volume complex devices.
SAP experience an advantage
Auditing experience and ISO 9001:2015 background
Role Responsibilities
Develop quality program status indicators and performance measurements.
Quality issues and performance metric analysis,
Audit processes internally and at suppliers, remedying work plans.
Develop and implement internal Quality Control Plans (QCP).
Ensure QC requirements and QA tasks are completed before tool or product is shipped.
Develop, implement and maintain procedures for inspections and testing in compliance with the Quality Management System (QMS).
Contribute to Quality Improvement Plans internally and with suppliers.
Utilize statistical quality tools and techniques to lower total quality costs.
Create and classify Product Quality (PQ) incident reports. Lead and coordinate PQ investigations.
Ensure compliance to internal and external management systems.....Read more...
Are you a talented Principal Firmware Engineer based in Gloucestershire looking for that company where you can be hands on and develop yourself even further?
Due to continued growth, one of the biggest market leaders involved within an exciting technology sector, developing complex machinery for the oil and gas industry, currently have a new job opportunity for a career minded Principal Firmware Engineer to come and join their team.
As the Gloucestershire based Principal Firmware Engineer, you will be involved with the Design Circuits of their complex and innovate technical applications.
You will have a significant role in the design and development of electronics for new projects, while maintaining existing hardware designs and being responsible for key technical elements of projects, including design, documentation, and implementation.
Essential Skills for the talented Principal Firmware Engineer job:
Embedded C/C++
Low level firmware
Ideally ST processor experience
This is a great opportunity to join a large R&D team in the Gloucestershire area, to work on state of the art equipment in a challenging and rewarding environment. This company has a fantastic reputation in the industry and are working on new large and exiting projects.
This Principal Firmware Engineer job is unlikely to be available for long so please APPLY NOW! You can do this by sending your CV to Ricky Wilcocks at Rwilcocks@redlinegroup.Com or call 01582 878810 / 07931788834.....Read more...
Manufacturing Engineer
Location: Fareham
Salary: £50k
Manufacturing Engineer Overview:
We are currently working with an international manufacturer providing world-class solutions to the aerospace, defence, nuclear and oil and gas sectors. Your role as a Manufacturing Engineer will assist in developing best common practices and executing manufacturing engineering strategies in a vertically integrated engineering company. Your task is to contribute to engineering solutions across multiple industries.
Manufacturing Engineer Responsibilities:
- Plan and implement safe, repeatable, and efficient production systems, processes, equipment, and facilities.
- Troubleshoot and problem-solve with internal and external stakeholders.
- Determine methods, tooling, and processes required for manufacturing.
- Compile manufacturing routings and BOMs within the company's MRP system.
- Use 3D design software to design tooling and assembly aids.
- Produce, update, and improve internal manufacturing specifications.
- Travel to supplier or customer sites to assist with technical challenges.
- Estimate manufacturing costs, including recurring and non-recurring costs.
- Contribute to new product introduction, development, and prototyping.
- Support APQP by facilitating FMEA plans, process flow diagrams, and control plans.
- Support business growth through research and implementation of new manufacturing systems.
- Provide technical support for production (assembly and machining) during change implementation.
Manufacturing Engineer Requirements:
- Minimum qualification HNC.
- Experience in a high-precision manufacturing environment.
- Understanding of manufacturing and design tolerances.
- Some experience with metal treatments or unconventional machining.
- ERP experience.
- Experienced MS Office user.
- AutoCAD 2D or 3D design experience.
- Experience using process mapping techniques.
- Welding knowledge would also be preferable.
- Experience in compiling technical documentation used in manufacturing.
How to apply for the Manufacturing Engineer role:
Please apply directly, or contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk
''....Read more...
Subsea Controls Electronics / Electrical Engineer required to work on the design, development and supply of products and services for subsea control and distribution to offshore oil and gas clients.
Skills and experience
Office-based electronics or electrical engineering experience of subsea controls.
Experience with the design and operation of Production Control Systems.
Concept design, detailed design and engineering delivery of electronics control systems.
PCB design and layout.
Experience with the introduction of new products from concept through to design and delivery ideally:
Subsea Electronic Modules.
Subsea Communications Profibus, Canbus, Modbus or Ethernet protocols.
DC or AC power distribution, low (240 V), medium (600 V) or high (1000 V) voltage units.
Subsea Power and Communication Units.
Electrical Test Unit and Master Control Station experience.
Responsibilities
Own and engineer the package from function design specification to design, engineering, manufacturing and testing.
Working closely with the New Product Initiative Team to support the delivery of NPI programs and assisting in defining the technology gaps to drive future NPI alignment.
Generating specifications, test procedures, operating manuals and other technical documentation required for project deliverables.
Ensuring and verifying technical compliance of products with specification, codes, standards, and client technical requirements.
Ensuring that the product design conforms to field proven or qualified technologies.
Oversee manufacturing, delivery and repair work, product testing and commissioning including electrical fault diagnostics, IR, TDR and oscilloscope for tests, installation and commissioning.
....Read more...
Subsea Controls Electronics / Electrical Engineer required to work on the design, development and supply of products and services for subsea control and distribution to offshore oil and gas clients.
Skills and experience
Office-based electronics or electrical engineering experience of subsea controls.
Experience with the design and operation of Production Control Systems.
Concept design, detailed design and engineering delivery of electronics control systems.
PCB design and layout.
Experience with the introduction of new products from concept through to design and delivery ideally:
Subsea Electronic Modules.
Subsea Communications Profibus, Canbus, Modbus or Ethernet protocols.
DC or AC power distribution, low (240 V), medium (600 V) or high (1000 V) voltage units.
Subsea Power and Communication Units.
Electrical Test Unit and Master Control Station experience.
Responsibilities
Own and engineer the package from function design specification to design, engineering, manufacturing and testing.
Working closely with the New Product Initiative Team to support the delivery of NPI programs and assisting in defining the technology gaps to drive future NPI alignment.
Generating specifications, test procedures, operating manuals and other technical documentation required for project deliverables.
Ensuring and verifying technical compliance of products with specification, codes, standards, and client technical requirements.
Ensuring that the product design conforms to field proven or qualified technologies.
Oversee manufacturing, delivery and repair work, product testing and commissioning including electrical fault diagnostics, IR, TDR and oscilloscope for tests, installation and commissioning.
....Read more...
Wind Turbine Instructor
London
£50,000 - £55,000 Basic + Training + Holidays + Package + Progression + Family Feel
Are you passionate about renewable energy and looking for a career that makes a difference? The company is at the forefront of the clean energy revolution, and are seeking a skilled and dedicated Wind Turbine instructor to join their growing team. In this exciting role, you will play a crucial part in maintaining and optimizing wind turbines. Benefit from on going training and having a variety of tasks to keep you on your toes.
This company is one of the leading providers of training in the oil and gas and renewable energy industries, making a massive impact nationally ensuring their efficiency and reliability are up to high standards.If you want to be involved in a constantly growing company. This is your opportunity to be part of a dynamic industry that’s shaping the future of energy. Apply now and solidify a career where you will be valued everyday and highly rewarded! Your Role As Wind Turbine Instructor Will Include:
* Some Hands On Maintenance And Repairs Of Turbines * Attending And Taking Training Courses * Travelling Around The UK * Rope Access Training As Successful Wind Turbine Instructor Will Have:
* Technical Background From Wind Turbines * Industry Knowledge * Fibre Glass Experience (Not Compulsory) * Commutable Around London For immediate consideration please call Matthew on 07458163042 or click to apply
Keywords: Field service, Wind Turbine Engineer, Renewable Energy, Fibre Glass Engineer, Blade Repair Engineer, Bolt Repair Technician,Field service engineer, Electrical engineer, Technical engineer, Technical, Electrical, Electro mechanical, commercial engineer, industrial engineer, ,maintenance engineer, engineer, mobile engineer, field engineer, fse,Commercial, Installation engineer, installation, service engineer, lift engineer, calibration Trainee,Trainee Engineer,Customer service, Commercial, London, Enfield, Croydon, Watford, Slough, Chelmsford, Luton, Harrow. Mitcham. Bromley, Reading, Kent, Brighton, Oxford, Swindon, Crawley, Bedford,Sutton ....Read more...
Our client is looking for a Software Engineer to develop simulations that mathematically model dynamic time dependent chemical processes in oil & gas processesing. Working from computational fluid dynamic theory and three-dimensional numerical simulation of commercial engine intake you will help optimise the refinery process for veichle efficiency.
Process simulation and optimisation experience would be highly beneficial, ideally in: Advanced Simulation Library, Aspen Plus / Aspen HYSYS, Batch Reactor, K-Spice, CHEMCAD, DWSIM, EMSO, EQ-COMP, Dymola, Flowtran, LIBPF, OptiRamp etc???.
The successful candidate must have strong Software Development and Process, Industrial or Chemical Engineering Experience as they will utilise knowledge of both aeard in this position. You will also have broad and deep expertise in algorithms, modelling, simulation, and numerical methods and be comfortable working with diverse cross functional teams such as: product and service teams, subject matter experts in cloud architecture, simulation & modelling, computations and dataflow networks.
Key skills:
Knowledge of chemical engineering and industry standard process simulators.
Physics-based process modelling, digital fluid models and flowsheet simulation interface implementation.
Algorithms development
Writing clean and efficient code with automated test coverage
Cloud Technology
Desktop application development, the more complex the better: Healthcare, Scintific, Financial etc.
High-Performance Computing
User Experience Design / UX
Web App and Micro services ....Read more...
Our client is looking for a Software Engineer to develop simulations that mathematically model dynamic time dependent chemical processes in oil & gas processesing. Working from computational fluid dynamic theory and three-dimensional numerical simulation of commercial engine intake you will help optimise the refinery process for veichle efficiency.
Process simulation and optimisation experience would be highly beneficial, ideally in: Advanced Simulation Library, Aspen Plus / Aspen HYSYS, Batch Reactor, K-Spice, CHEMCAD, DWSIM, EMSO, EQ-COMP, Dymola, Flowtran, LIBPF, OptiRamp etc???.
The successful candidate must have strong Software Development and Process, Industrial or Chemical Engineering Experience as they will utilise knowledge of both aeard in this position. You will also have broad and deep expertise in algorithms, modelling, simulation, and numerical methods and be comfortable working with diverse cross functional teams such as: product and service teams, subject matter experts in cloud architecture, simulation & modelling, computations and dataflow networks.
Key skills:
Knowledge of chemical engineering and industry standard process simulators.
Physics-based process modelling, digital fluid models and flowsheet simulation interface implementation.
Algorithms development
Writing clean and efficient code with automated test coverage
Cloud Technology
Desktop application development, the more complex the better: Healthcare, Scintific, Financial etc.
High-Performance Computing
User Experience Design / UX
Web App and Micro services ....Read more...
Production Engineer
Location: Ferndown, Dorset
Are you ready to join a global leader in engineering and design manufacturing? With over six decades of experience in highly regulated industries such as nuclear, aerospace, and oil and gas, our client is a trusted name in delivering mission-critical solutions. They specialise in sensors, instrumentation, and control systems for harsh environments where safety and reliability are paramount.
The Role:
As a Production Engineer, you will play a vital role in delivering engineering solutions and technical support to manufacturing teams. You will ensure production objectives are met regarding cost, quality, and schedules while driving innovation and continuous improvement.
Key Responsibilities:
- Provide accurate cost and timescale estimates for bids and projects.
- Collaborate on product design to create robust and accurate documentation.
- Ensure smooth production processes by creating manufacturing routings, BOMs, and process instructions.
- Investigate and resolve production issues promptly.
- Support lean manufacturing and propose new technologies or capital equipment as needed.
What Were Looking For:
- HNC/HND in an engineering-related discipline or extensive production engineering experience.
- Familiarity with manufacturing processes and techniques in electrical or mechanical production.
- Proficiency in reading electronic schematics, wiring schedules, and mechanical drawings.
- Experience working with ERP/MRP systems and designing jigs or fixtures (3D CAD desirable).
- Strong computer skills (Microsoft Office, including Visio).
- Eligibility for UKSV SC security clearance.
Whats on Offer:
- A collaborative and empowering work environment.
- Flexible working options to suit your lifestyle.
- The chance to work with a global leader in engineering excellence.
If you are passionate about manufacturing and enjoy working in a dynamic, innovative environment, wed love to hear from you. Apply today to take the next step in your career! If you do have any questions please reach out to liam.nother@holtengineering.co.uk....Read more...
