Satellite communications terminal Hardware Design Engineer required to work on existing Microwave and RF PCB and PCBA boards, troubleshooting and reworking performance issues.
You will have experience testing, debugging and diagnosing complex military grade satellite transceiver PCBs and helping future proof related issues in new PCBA systems.
Skills
RF circuit design ideally to military rugged standards.
Satellite antenna transceiver electronic design experience.
RF mm wavelengths.
Hardware simulation
Defence and military standards.
Oscilloscopes, spectrum analysers, signal generators, multi-meters, power supply and other lab test equipment experience.
Python, MATLAB or other programming and simulation knowledge.
PCBA component level rework using irons, hot air, and IR equipment.
Role
Testing production PCB and PCBA assemblies, using automated functional test equipment.
Diagnosing faults to component level.
Recording test results, faults and rework action.....Read more...
Satellite communications terminal Hardware Design Engineer required to work on existing Microwave and RF PCB and PCBA boards, troubleshooting and reworking performance issues.
You will have experience testing, debugging and diagnosing complex military grade satellite transceiver PCBs and helping future proof related issues in new PCBA systems.
Skills
RF circuit design ideally to military rugged standards.
Satellite antenna transceiver electronic design experience.
RF mm wavelengths.
Hardware simulation
Defence and military standards.
Oscilloscopes, spectrum analysers, signal generators, multi-meters, power supply and other lab test equipment experience.
Python, MATLAB or other programming and simulation knowledge.
PCBA component level rework using irons, hot air, and IR equipment.
Role
Testing production PCB and PCBA assemblies, using automated functional test equipment.
Diagnosing faults to component level.
Recording test results, faults and rework action.....Read more...
Senior RF Engineer required to join a Security Cleared team Designing linear high power wide band RF amplifiers up to 200 Watts using GaN or LDMOS electronic circuits and sub assemblies for military and airborne use.
You work as part of a small dynamic RF and Hardware team and contribute across the full product lifecycle from requirements, design, test, release and support of RF designs.
Requirements
Transmitter and Receiver circuit design for military or airborne systems, MIL-STDs or DO160.
GaN or LDMOS high power wide band RF amplifiers up to 200 Watts.
RF filter design.
Antenna design with LNA, Down converter and Upconverters
PCB Design Software and RF simulation tools.
Altium, Cadence AWR Microwave Office, Ansys HFSS.
Bachelors, Masters or PhD degree in related subject
British Citizen or ability to obtain required security clearance (SC).
Responsibilities
RF Design, System Architecture, RF Simulation, Schematic capture, PCB Layout and Footprint.
Design Reviews as logical.
Design verification against specifications.....Read more...
RF Engineer required to join a Security Cleared team Designing linear high power wide band RF amplifiers up to 200 Watts using GaN or LDMOS electronic circuits and sub assemblies for military and airborne use.
You work as part of a small dynamic RF and Hardware team and contribute across the full product lifecycle from requirements, design, test, release and support of RF designs.
Requirements
Transmitter and Receiver circuit design for military or airborne systems, MIL-STDs or DO160.
GaN or LDMOS high power wide band RF amplifiers up to 200 Watts.
RF filter design.
Antenna design with LNA, Down converter and Upconverters
PCB Design Software and RF simulation tools.
Altium, Cadence AWR Microwave Office, Ansys HFSS.
Bachelors, Masters or PhD degree in related subject
British Citizen or ability to obtain required security clearance (SC).
Responsibilities
RF Design, System Architecture, RF Simulation, Schematic capture, PCB Layout and Footprint.
Design Reviews as logical.
Design verification against specifications.....Read more...
Senior RF Engineer required to join a Security Cleared team Designing linear high power wide band RF amplifiers up to 200 Watts using GaN or LDMOS electronic circuits and sub assemblies for military and airborne use.
You work as part of a small dynamic RF and Hardware team and contribute across the full product lifecycle from requirements, design, test, release and support of RF designs.
Requirements
Transmitter and Receiver circuit design for military or airborne systems, MIL-STDs or DO160.
GaN or LDMOS high power wide band RF amplifiers up to 200 Watts.
RF filter design.
Antenna design with LNA, Down converter and Upconverters
PCB Design Software and RF simulation tools.
Altium, Cadence AWR Microwave Office, Ansys HFSS.
Bachelors, Masters or PhD degree in related subject
British Citizen or ability to obtain required security clearance (SC).
Responsibilities
RF Design, System Architecture, RF Simulation, Schematic capture, PCB Layout and Footprint.
Design Reviews as logical.
Design verification against specifications.....Read more...
RF Engineer required to join a Security Cleared team Designing linear high power wide band RF amplifiers up to 200 Watts using GaN or LDMOS electronic circuits and sub assemblies for military and airborne use.
You work as part of a small dynamic RF and Hardware team and contribute across the full product lifecycle from requirements, design, test, release and support of RF designs.
Requirements
Transmitter and Receiver circuit design for military or airborne systems, MIL-STDs or DO160.
GaN or LDMOS high power wide band RF amplifiers up to 200 Watts.
RF filter design.
Antenna design with LNA, Down converter and Upconverters
PCB Design Software and RF simulation tools.
Altium, Cadence AWR Microwave Office, Ansys HFSS.
Bachelors, Masters or PhD degree in related subject
British Citizen or ability to obtain required security clearance (SC).
Responsibilities
RF Design, System Architecture, RF Simulation, Schematic capture, PCB Layout and Footprint.
Design Reviews as logical.
Design verification against specifications.....Read more...
Ensures proper flow of office procedures and supports the team by carrying out office duties
Maintains a positive and friendly company image by acting as the first line of contact to visitors and customers in person, online, and via telephone
Manages correspondence by answering emails and sorting mailLooks after visitors
Answers phone calls and transfer them as necessary to the relevant personnel
Drafts, formats, and prints relevant documents
Using the Microsoft Office suite.
Training Outcome:Full-time Employment and Career Progression. Employer Description:Admiral Property Services is a full service property maintenance company based in Bristol and servicing South West. We were founded by a recent British military leaver and seek to bring those core values of the military to the Bristol property market.
We have a range of experience across:• Reactive and planned property maintenance
• Domestic and Commercial Property Management• Building and Carpentry• Electrical and Mechanical• Plumbing and Heating• Decorating and PaintingWorking Hours :Monday - Friday inclusive and the usual daily shift is from 8.00am to 2:30pm. Extra hours may occasionally be requested, but this is usually with notice.Skills: Communication skills,IT skills,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
SSDT Logistician required to a Defence Equipment and Support DE&S team who develop and manage through life support solutions for military hardware, ensuring equipment is maintained and operated effectively throughout it???s lifecycle.
Requirements
Experience in defence logistics and ILS.
SSDT or Support Solutions Development Tool skills.
Responsibilities
Use Support Solutions Development Tool, SSDT profile logistics support requirements.
Develop and implement integrated logistics support, ILS strategies.
Collaborate with technical teams, suppliers, and armed forces to deliver cohesive support solutions.
Manage support requirements and resources to ensure operational readiness.
Optimise logistics processes for cost-effectiveness and efficiency.....Read more...
SSDT Logistician required to a Defence Equipment and Support DE&S team who develop and manage through life support solutions for military hardware, ensuring equipment is maintained and operated effectively throughout it???s lifecycle.
Requirements
Experience in defence logistics and ILS.
SSDT or Support Solutions Development Tool skills.
Responsibilities
Use Support Solutions Development Tool, SSDT profile logistics support requirements.
Develop and implement integrated logistics support, ILS strategies.
Collaborate with technical teams, suppliers, and armed forces to deliver cohesive support solutions.
Manage support requirements and resources to ensure operational readiness.
Optimise logistics processes for cost-effectiveness and efficiency.....Read more...
Embedded Digital Electronics Design Engineer required to design military aerospace technology products. You will have embedded control system design experience in automotive, telecoms, aerospace or medical sectors and degree qualified in electronics.
Key Skills
Embedded controller design in FPGA, Processor and Micro Controllers.
Embedded controller hardware design and development.
Circuit simulation and design in DOORS, SPICE, Saber, SiMetrix, EWB, TINA, Mathcad, MATLAB, Simulink and Xilinx.
Communication protocol design CAN, ARINC and AFDX.
Precision analogue and digital electronics circuit design, LVDTs, Resolvers, Temperature and Pressure Sensors, Solenoids and PWM circuits.
PCB layout and design for signal integrity and EMC.
DFM, DFT designing to cost requirements.
Design verification, test specification and quality reporting.
PCB design, schematic capture and circuit simulation.
Mentor Graphics, Cadence design tools
VHDL, Python and C advantageous.
PCB design in Mentor Graphics or Cadence. ....Read more...
Embedded Digital Electronics Design Engineer required to design military aerospace technology products. You will have embedded control system design experience in automotive, telecoms, aerospace or medical sectors and degree qualified in electronics.
Key Skills
Embedded controller design in FPGA, Processor and Micro Controllers.
Embedded controller hardware design and development.
Circuit simulation and design in DOORS, SPICE, Saber, SiMetrix, EWB, TINA, Mathcad, MATLAB, Simulink and Xilinx.
Communication protocol design CAN, ARINC and AFDX.
Precision analogue and digital electronics circuit design, LVDTs, Resolvers, Temperature and Pressure Sensors, Solenoids and PWM circuits.
PCB layout and design for signal integrity and EMC.
DFM, DFT designing to cost requirements.
Design verification, test specification and quality reporting.
PCB design, schematic capture and circuit simulation.
Mentor Graphics, Cadence design tools
VHDL, Python and C advantageous.
PCB design in Mentor Graphics or Cadence. ....Read more...
Key Duties and Responsibilities:
Throughout the apprenticeship, you will be trained and supported to competently carry out the following:
Program, set, and operate CNC machine tools using company-supplied production, engineering, and process documentation
Interpret and work from detailed technical drawings, specifications, and job instructions
Produce precision components to required tolerances using CNC milling and/or turning machines
Carry out first-off inspections and ongoing self-inspection to ensure components meet quality and technical standards
Accurately complete all relevant internal production, quality, and inspection documentation
Assist with production planning activities to support efficient machine utilisation and workflow
Monitor machining processes and make basic adjustments where required under supervision
Perform routine machine maintenance, basic fault reporting, and housekeeping to maintain a safe and efficient working environment
Work in accordance with Health & Safety regulations, company procedures, and safe systems of work always
Develop an understanding of continuous improvement, lean manufacturing principles, and workplace efficiency
Training:Training and Development:
As part of the apprenticeship standard, you will receive structured training covering:
CNC programming fundamentals
Machining techniques, tooling, and materials
Engineering mathematics and metrology
Quality control and inspection techniques.
Health, safety, and environmental practices
Professional behaviours such as teamwork, communication, and problem solving
You will be supported by experienced engineers and mentors, you will work towards successful completion of your apprenticeship
Training Outcome:Full time position on successful completion of Apprenticeship.Employer Description:TGM was formed in 1998 and specialises in the 3,4 and 5 axis machining of hard and soft metals up to 4.2 metres long. Today, ASG TGM customers come from both military and civil markets. ASG TGM have LTAs in place on civil and military platforms.
In 2020 the 18-machine strong TGM invested in a state of the art 4.2 metre, 5 axis machining centre and a new assembly clean room. ASG TGM have held an SC21 Bronze Award since July 2018.Working Hours :Monday to Friday. Shifts TBC.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Initiative,Physical fitness....Read more...
Hot Fire Space Thruster Test Engineer required join a very busy space thruster test facility focusing on Hot Fire Testing programmes. The ideal candidate will understand space thruster theory particularly the ground test of thrusters for the design and manufacture of liquid propellant and high pressure gas feed systems.
You will have an input to Research and Development and other space propulsion related activities so need to be proficient in analysing and assessing test data including collation and analysis then presentation graphs, tables, etc.
Requirements
Space thruster Knowledge
Understand propellant MIL spec analysis, Military Standard Propellants
Chemical laboratory techniques and processes
Mechanical fitter/practical engineering skills preferably gained from an apprenticeship or from within an engineering related organization.
Responsibilities
Site preparation and maintenance
Fuel and oxidiser handling
Pressure systems
Instrumentation
Control systems
Space thruster theory
Steam boiler operation
Data analysis
Site and system safety....Read more...
Providing general administrative support including filing, data entry, and document management
Answering phone calls and emails, and directing enquiries to the appropriate person or department
Maintaining accurate records and updating internal systems and databases
Assisting with the preparation of reports, correspondence, and presentations
Scheduling meetings, managing calendars, and organising appointments
Supporting internal teams with day-to-day operational tasks
Handling incoming and outgoing post
Assisting with office organisation and ensuring administrative processes run smoothly
Adhering to company policies, procedures, and confidentiality requirements
Training:
All training in delivered in the workplace with 6 hours set aside for college work
Monthly visits to the work place where Assessor will set college work to be completed
Training Outcome:
Progression route within the company
Employer Description:Our Goal:
To be The Supplier of Choice to the Global Aerospace, Space, and Defence sector.
Our Mission:
Solving Engineering & Operational Problems Through Innovation & Engineering Excellence To Maintain a Strategic & Technological Advantage For Our Defence, Aerospace & Space Partners & Allied Governments Around The Globe.
The CMCA Group of Companies are UK based specialists in the design, manufacture and support of high specification, ruggedized military equipment to support the most advanced applications in the world.
Established in 1998 as a single company, CMCA Limited quickly cemented its name with the UK MOD, NATO and Allied forces providing innovative HVAC (Heating, Ventilation, Air-Conditioning) solutions to support both equipment and personnel operating in the harshest environments on earth.
The innovative and comitment to resolve programme constraints provided further growth in developing high performance, high efficiency, silent diesel power generation systems to provide high quality, reliable power for shelter integrated systems, advanced sensor systems, satellite communication platforms and camp infrastructure providing the customer with combined cooling and power capabilities.
From the lessons learnt designing and supporting a range of specialist integrated shelter systems, CMCA expanded its core capability in becoming an in-house shelter and systems integrator, supplying its first turn key shelter solutions to the UK MOD in 2010 and beginning a new era providing fully turn key shelter solutions designed to customer specification and manufactured to the highest military standards. Working Hours :Monday – Thursday, 8.00am - 4.30pm, Friday, 8.00am - 2.00pm.
30 mins for lunch.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Team working,Initiative....Read more...
PCB Design Engineer JOB BASED IN NORTHAMPTONSHIRE.
This position will involve working within an experienced ECAD design team, you will be involved in developing leading high speed digital PCB electronic layouts for the defence/military industries.
As a PCB Design Engineer, you will be trained in PCB design/layout and be given extensive training in ECAD packages.
Key skills/experience for the PCB Design Engineer job:
- HNC, HND or higher in Electrical/ Electronic Engineering.
- A minimum of 2 years experience in PCB layout design
- Experience in CAD packages, ideally mentor graphics Xpedition
- highly proficient with High speed digital designs
This is a great chance to join a growing company who can offer the opportunity for career progression and personal development. This job is a great opportunity for a PCB Design engineer, who thrives in a team environment and wishes to work in an interesting, successful, global organisation based in Northamptonshire.
To apply for this PCB Design Engineer job position based in Northamptonshire please send your CV to Ricky Wilcocks, rwilcocks@RedlineGroup.Com, or phone 01582 878810 for further information, otherwise we always welcome the opportunity to discuss other engineering jobs.....Read more...
An exciting opportunity has arisen for a Mechanical Design Engineer (Components) to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a Mechanical Design Engineer, you will be responsible for transforming ideas into precision-engineered products, from prototype to production, ensuring quality, cost, and delivery targets are met.
This full-time role offers benefits and a salary of £37,000 working 37.5 hours a week.
Key Responsibilities
? Developing CAD concepts using CATIA V5 (surface, solid, and 2D) based on customer data and packaging constraints.
? Providing design and manufacturing input to assess feasibility, cost, and capability, coordinating with internal teams and suppliers.
? Leading design feasibility reviews and ensuring designs meet customer and internal standards.
? Creating detailed CAD models for prototype manufacture and approval.
? Create and update the Manufacturing Feasibility Report (MFR) during all stages of the project.
? Develop and validate process flows, PFMEA, Control Plans, and Standard Operating Procedures for pre-production
? Managing prototype builds, liaising with suppliers, tooling teams, and manufacturing departments.
? Overseeing the finalisation of designs for production release, ensuring the correct application of GD&T and tolerance stack-ups.
? Supporting production ramp-up and driving continuous improvement initiatives.
What We Are Looking For
? Previously worked as a Mechanical Design Engineer, Mechanical Engineer, Mechanical Designer, Product Design Engineer, or in a similar role within an engineering design and manufacturing setting.
? Prior experience in automotive, Chemical Process, Mining, Rail, Aerospace, Marine, military vehicle or in similar sector
? Have background in new product introduction (NPI) and process development
? Proficiency in CATIA V5 for 3D mod....Read more...
Principles of Project Management
Leadership and Change Management
Operations Management
Strategic Management
Training:The degree apprenticeship programme lasts for a period of 4 years and is a partnership between Safran and Aston University.Training Outcome:Association of Project Management.Employer Description:In the United Kingdom, Safran Aerospace designs, develops, manufactures and supports a comprehensive range of solutions for ministries of defence, integrators, aircraft manufacturers, airlines, business-jet operators and many other customers worldwide. We help make military missions more effective, pilots more aware and flights safer and more enjoyable. We are strongly committed to investing in the UK, where Safran Aerospace provides a workforce that adds value to the UK economy and supports the extended supply chain. We create our own intellectual property and contribute to the exportation of aerospace and defense products and systems outside Europe. Through our collaboration with the European aerospace and defense industrial base, including small and medium-sized enterprises and mid-caps, Safran Aerospace in the UK brings affordable and disruptive technologies and capabilities to the collective development, competitiveness and security interests of Europe. World-class facilities combine with a dedicated and talented workforce from across the UK to create a single-minded commitment: redefining aerospace in ways that expand what our customers can achieve.Working Hours :Monday to Thursday 8am to 4.45pm.
Friday 8am to 12pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
A leading aerospace and aviation organisation is seeking an experienced Compliance Investigator to support its Maintenance, Repair and Overhaul (MRO) operations. This is a contract opportunity, based primarily in Oxfordshire, with regular travel required to operational sites across the UK.
The successful contractor will play a key role in ensuring regulatory and operational compliance, conducting in-depth investigations, identifying root causes, and driving corrective and preventive actions. This role sits within a compliance and quality-focused environment and supports the promotion of safety, standardisation, and continuous improvement across multiple locations.
Key ResponsibilitiesCompliance Investigations & Root Cause Analysis
Conduct thorough investigations into compliance-related incidents, discrepancies, and safety concerns
Perform MEDA investigations where required
Apply Root Cause Analysis methodologies such as 5 Whys, Fishbone Diagrams, and Fault Tree Analysis
Identify Human Factors and Human Performance contributors
Analyse trends and systemic issues, ensuring sustainable corrective actions are implemented
Regulatory & Quality Assurance
Ensure adherence to applicable aviation regulatory frameworks, including Part 145 and associated UK/EASA requirements
Support compliance with CAMO, Part 21 G, and military aviation regulations where applicable
Work closely with Quality and Assurance teams to support audits and inspections
Support regulatory audits and coordinate responses to findings, ensuring timely closure of non-conformances
Process Improvement & Risk Mitigation
Collaborate with cross-functional teams to improve maintenance procedures and operational effectiveness
Recommend and support implementation of risk mitigation strategies
Promote best practice in safety, human factors, and compliance monitoring
Stakeholder Engagement & Reporting
Produce clear, structured investigation reports with recommendations for senior stakeholders and regulators
Engage with engineering, maintenance, production, and safety teams to improve compliance awareness
Maintain accurate investigation records and track corrective and preventive actions (CAPA)
Essential Experience & Skills
Proven experience conducting compliance investigations within an aviation maintenance or aerospace environment
Strong expertise in Root Cause Analysis and structured problem-solving techniques
In-depth knowledge of UK CAA and EASA regulatory frameworks, particularly Part 145
Solid understanding of Human Factors, Human Performance, and limitations
Experience reviewing technical documentation, maintenance records, and regulatory requirements
Background in audits and inspections within a maintenance or regulated environment
Strong analytical, report-writing, and stakeholder communication skills
Proficiency with Quality Management Systems (QMS) and compliance monitoring tools
Desirable Experience
Experience with MEDA investigations
Knowledge of CAMO, Part 21 G, and/or military aviation regulations (MRP 145, MIL CAMO)
Familiarity with ISO 9001, AS9100, or equivalent aviation quality standards
Experience using Lean, Six Sigma, or continuous improvement methodologies
Ability to engage confidently with stakeholders at all levels
Qualifications & Experience Essential
Formal training in Root Cause Analysis and investigative techniques
Security Clearance (SC) or the ability to obtain clearance
Desirable
Aviation Safety Management Systems (SMS) certification
Aviation Auditor or Lead Auditor certification
Lean Six Sigma Green or Black Belt
Extensive background in compliance, investigation, or audit roles within an aviation MRO setting
This contract role would suit a compliance-focused aviation professional who thrives in regulated environments and is comfortable working across multiple sites.
Applications are welcomed from all suitably qualified contractors regardless of gender, background, or personal characteristics.
....Read more...
Reporting handling and collation using Microsoft Suite (Excel / PowerPoint / Word Documents)
Assisting with time and attendance queries, system issues and training
Collaborating with the wider HR team and operations to resolve discrepancies in data
Working to maintain/upgrade documents in line with business changes
Participation in HR projects relating to data capture such as ad hoc events and activities
Supplying accurate data to the Communications Team in regard to headcount to facilitate targeted comms
Training Outcome:Senior Data Analyst.Employer Description:In the United Kingdom, Safran Aerospace designs, develops, manufactures and supports a comprehensive range of solutions for ministries of defence, integrators, aircraft manufacturers, airlines, business-jet operators and many other customers worldwide. We help make military missions more effective, pilots more aware and flights safer and more enjoyable. We are strongly committed to investing in the UK, where Safran Aerospace provides a workforce that adds value to the UK economy and supports the extended supply chain. We create our own intellectual property and contribute to the exportation of aerospace and defense products and systems outside Europe. Through our collaboration with the European aerospace and defense industrial base, including small and medium-sized enterprises and mid-caps, Safran Aerospace in the UK brings affordable and disruptive technologies and capabilities to the collective development, competitiveness and security interests of Europe. World-class facilities combine with a dedicated and talented workforce from across the UK to create a single-minded commitment: redefining aerospace in ways that expand what our customers can achieve.Working Hours :Monday to Thursday 8am to 4.45pm
Friday 8am to 12pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative....Read more...
We are currently recruiting for a PCB Design Engineer to join an established and experienced ECAD design team based in Northamptonshire. This role will involve the design and layout of high-speed digital PCBs for defence and military applications.
The successful candidate will be part of a small, highly capable Northamptonshire based team, and will take responsibility for their own PCB designs while working to demanding project time scales. Comprehensive training will be provided in PCB layout and ECAD tools, making this an excellent opportunity for an engineer looking to further develop their technical skills within a structured engineering environment.
Key Responsibilities
Design and layout of high-speed digital printed circuit boards
Work within an ECAD design team to deliver defence-related projects
Maintain high standards of accuracy, quality, and documentation
Manage own workload and meet project deadlines
Skills and Experience Required of the PCB Design Engineer
HNC, HND, or higher qualification in Electrical or Electronic Engineering
Provable experience in PCB layout design
Experience using ECAD/CAD tools (Mentor Graphics Xpedition preferred)
Strong understanding of high-speed digital PCB design
Ability to work effectively both independently and as part of a team
What’s on Offer
Opportunity to work on technically challenging defence projects
Ongoing training and professional development in ECAD and PCB design
Clear career progression within a growing organisation
Stable role within a successful, global engineering business
To apply for this PCB Design Engineer position based in Northamptonshire, please submit your CV to Kyle Graveney. Alternatively, you may call 01582 878817 for further information or to discuss other engineering opportunities.....Read more...
£33,000 starting, permanent role, travel benefits, wellness programmes, ongoing training and development, enhanced company pension plan, Mon-Fri no weekend work, sick pay scheme, free onsite parkingWe are seeking a Service Coordinator to join a world-renowned, multinational automotive company supporting the service, repairs, permissions, and maintenance of works within the fire division.This service coordinator role is working with an International Vehicle Manufacturer providing effective customer service and building relationships with both internal and external customers for vehicles in transport depots, airports, MOD Sites etc.Key responsibilities for the Service Coordinator –
To supervise the maintenance and repair activities and book engineers for Civilian and Military contracts
Coordinate Engineers, manage schedules and bookings, handle breakdown requests and organise the workload of engineers
To provide effective customer service and build relationships with both internal and external customers
To action customer repair’s, maintenance and breakdowns
To manage goods in and out of Gloucester stores
Ensure all jobs are entered onto the appropriate in-house computer system
Account management for customers
What we are looking for in our Service Coordinator -
Ability to troubleshoot and work under pressure, whilst having the ability to prioritise the workload
High standards of customer service
Experience working with online and internal databases to manage works
Previous experience within a role in which you have to plan and manage works
Previous account management in some sort of capacity
Previous experience within the automotive industry is prereferral
If you are interested in this service coordinator role, please apply now or for further information please don’t hesitate to contact Grace at E3 Recruitment.If you are interested in the service coordinator role but don’t feel you match the direct requirements, please feel free to contact me directly.....Read more...
Provide Quality interface between Quality, Operations, support functions and Clinics
Support Quality Clinic Investigations
Support QN resolution
Support with line side quality investigations
Support with Quality improvement projects
Interface with Operations and Supply Chain teams for all Clinic related Quality issues
Ensure full containment of all quality related issues is executed as required
Measure and analyse Quality Clinic performance data
Support Customer Quality Engineers in RRCA
Support the Quality Management System to ensure compliance to all applicable requirements
Ensure critical QNs are actioned through 8D's and other problem-solving tools.
Support the reduction of non-conformances both Internal & External to eliminate repeat QNs
Support SRR reduction projects
Perform any additional tasks when required to support the Quality team
Training:Day release to attend college - once per week.Training Outcome:Quality Practioner working towards a Quality Engineer PositionEmployer Description:In the United Kingdom, Safran Aerospace designs, develops, manufactures and supports a comprehensive range of solutions for ministries of defence, integrators, aircraft manufacturers, airlines, business-jet operators and many other customers worldwide. We help make military missions more effective, pilots more aware and flights safer and more enjoyable. We are strongly committed to investing in the UK, where Safran Aerospace provides a workforce that adds value to the UK economy and supports the extended supply chain. We create our own intellectual property and contribute to the exportation of aerospace and defense products and systems outside Europe. Through our collaboration with the European aerospace and defense industrial base, including small and medium-sized enterprises and mid-caps, Safran Aerospace in the UK brings affordable and disruptive technologies and capabilities to the collective development, competitiveness and security interests of Europe. World-class facilities combine with a dedicated and talented workforce from across the UK to create a single-minded commitment: redefining aerospace in ways that expand what our customers can achieve.Working Hours :Monday to Thursday 8am to 4.45pm
Friday 8am to 12pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Analytical skills,Logical,Accountability,Positive attitude....Read more...
Completion and/or provision of information to the negotiation of terms and pricing.
Assistance to and provision of information to negotiations and decision-making requiring escalation for resolution.
Responsible for existing contractual relationships with customers.
Generation of business cases and gaining approval, ensuring contractual sign off in accordance with approvals matrix, and preparation and issue of contractual proposals.
Contract review and management ensuring adherence to contractual requirements.
Presentation, analysis and interpretation of Contracts & Commercial data with recommendations for the way ahead to facilitate decision-making.
Prepare contract summaries of new and existing contracts and brief multidisciplined teams as to the obligations and contractual risks.
Providing contractual support and advice to multi-functional teams.
Drafting and negotiation of agreements and contract clauses in line with corporate guidelines.
Contract risk and opportunity management.Conformance to contract and business processes.
Compliance to International Trade requirements and internal compliance management.
Being a business partner to all other functions.
Training:Day release/ block release - dependant on training provider's delivery schedule.Training Outcome:Contracts Manager.Employer Description:In the United Kingdom, Safran Aerospace designs, develops, manufactures and supports a comprehensive range of solutions for ministries of defence, integrators, aircraft manufacturers, airlines, business-jet operators and many other customers worldwide. We help make military missions more effective, pilots more aware and flights safer and more enjoyable. We are strongly committed to investing in the UK, where Safran Aerospace provides a workforce that adds value to the UK economy and supports the extended supply chain. We create our own intellectual property and contribute to the exportation of aerospace and defense products and systems outside Europe. Through our collaboration with the European aerospace and defense industrial base, including small and medium-sized enterprises and mid-caps, Safran Aerospace in the UK brings affordable and disruptive technologies and capabilities to the collective development, competitiveness and security interests of Europe. World-class facilities combine with a dedicated and talented workforce from across the UK to create a single-minded commitment: redefining aerospace in ways that expand what our customers can achieve.Working Hours :Monday to Thursday 8am to 4.45pm.
Friday 8am to 12pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Administrative skills,Analytical skills,Logical,Team working,Personal integrity....Read more...
Test Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: PCB, Testing, Electronics
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We are seeking a skilled Test Engineer to join our client's team, who is responsible for developing test requirements, creating test instructions, and testing PCBs, assemblies, and systems. The ideal candidate will have a strong background in electronics and measurement technology, with practical experience in handling measuring equipment and a good understanding of radio frequency and power engineering.
Main Responsabilities:
Development of test requirements and new test methods in collaboration with the development department
Creation of test instructions and test reports
Testing, repairing (requires e.g. soldering skills) and commissioning of PCB’s, assemblies and systems as well as participation in tests in the test field
Checking production orders and goods receipt material according to quality characteristics
Perform factory inspections with customers
Management of measuring equipment storage
Construction of test facilities for the rationalization of test procedures
Required Competencies:
Completed technical training in the direction of electronics/measurement technology, technician school, an advantage
Practical experience in handling measuring equipment
Knowledge of radio frequency and power engineering is an advantage
Excellent knowledge of German and English
Positive attitude to work
Reliable team player with a pronounced quality awareness
Enjoy working independently
Benefits:
Competitive salary and benefits package – Up to CHF 110k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 80-110k + Bonus Benefits
Tech Stack: PCB, Testing & Electronics
Applicants for the Test Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/TESARG80110....Read more...
Electrical Engineer/Designer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: Zuken E3 or E-PLAN P8
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek an experienced Electrical Design Engineer or Elektroplaner with Zuken E3 or E-Plan expertise to join our team. The successful candidate will be responsible for developing schematic drawings and Bills of Materials (BOMs) for complete systems. This role's primary focus will be creating high-quality schematic drawings and BOMs with a good understanding of the Low Voltage Directive.
Requirements:
Higher Technical School Qualification or Apprenticeship in Electrical Engineering
4+ years of experience in electrical design engineering
Strong understanding of electrical design principles, including circuit analysis and design
Proficiency in Zuken E3 or E-PLAN, with expertise in creating schematic drawings and BOMs
Knowledge of the Low Voltage Directive and relevant electrical safety standards
Excellent communication and collaboration skills
Ability to work independently and as part of a team
Strong problem-solving and analytical skills
Familiarity with design automation tools and methodologies
Nice to Have:
Bachelor's or Master's degree in Electrical Engineering or a related field
Experience with PCB design and layout
Knowledge of electrical testing and validation procedures
Familiarity with industry-standard design tools and software
Certification in electrical engineering or a related field
Benefits:
Competitive salary and benefits package – Up to CHF 120k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 100 -130k + Bonus Benefits
Tech Stack: Zuken E3, E-PLAN, PCB
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/EDARG100120....Read more...
