Quality Administrator / Technical Administrator / Quality Systems AdministratorCheddar, Somerset Office Based Part Time – 3 days a week C18,000My client, a successful and expanding food company is seeking a Part Time Quality Administrator / Technical Administrator to work at their modern site in Somerset. This is a newly created role that will report into the Head of Technical and would suit a candidate that has experience working within Technical or Quality roles within Food / Drink Manufacturing and is seeking a role that offers a work life balance of 3 days per week.The successful Quality Administrator / Technical Administrator will be confident team player who can work on their own initiative. The role will focus on managing key food safety systems, developing, and maintaining internal processes and conducting Internal Audits with suppliers. This is a non factory based roleSite Auditor Skills / Experience Required
Auditor experience ideally with experience in Food Manufacturing environmentsFull Right to Work in the UKFull Clean Driving Licence
If the role is of interest, then please send your CV today Key words: BRC, Auditor, Lead Auditor, Compliance, QA, Technical Manager, Quality Manager, Quality Supervisor, Quality Systems....Read more...
Time served / Apprentice trained Maintenance Electrician / Electrical Craftsperson is required for permanent position for a Manufacturing company in the Bury / Whitefield M45 area. Rate of pay is approx.. £48k pa incl. shift allowance (likely earnings to be circa £50k - £60k pa including regular O/T) plus benefits (see below). The successful candidate will be working a 4 week rotating, continental shift pattern, average of 42 hours/week (12 hour days & 12 hour nights, with 7 consecutive days off in a 4 week rotation).
The ideal candidate will have prior experience of working in an industrial manufacturing environment and be familiar with three phase / 440v, single phase and DC control systems (incl. motor and heating), industrial electrical installations and industrial manufacturing machinery.
Package:
£48k pa incl. shift allowance (weekly paid).
Regular overtime readily available, likely earnings to be £55-65k pa
33 days holiday allowance (6 hrs / half days can be taken)
Pension
Life assurance
Working Hours:
Continental shift pattern across 4 weeks - 12 hours shifts (Days 6am – 6pm & Nights 6pm - 6am)
4 week shift rotation example:
Week1: 1D, 3N, 3 OFF
Week2: 1 OFF, 3D, 3 OFF
Week3: 4 off, 3N
Week4: 4 off, 3D
Week5: 1D, 3N, 3 OFF
And so on.
The successful Maintenance Electrician / Electrical Maintenance Technician / Industrial Electrical Craftsperson day to day duties will include:
Diagnose and repair electrical problems on industrial and occasional domestic electrical systems – Including 3 phase motor control, DC motor control and Siemens control systems
Assess the parts needed for a job
Conduct routine preventative maintenance and testing
Rewire faulty electrical systems
Ensure good quality workmanship which upholds company standards and complies with industrial codes and follows safety requirements
Ability to work alone and also work within a team
Install electrical systems to 17th / 18th edition regs.
The ideal Maintenance Electrician / Industrial Electrical Craftsperson will have the following experience, skills and characteristics:
Completed relevant maintenance engineering apprenticeship i.e. NVQ L3 / C&G L3
Recent experience as an Electrical Maintenance Engineer in a manufacturing environment.
Relevant electrical engineering qualification and knowledge of current electrical wiring regulations 17/18th
Good working knowledge Three phase, single phase and DC control systems – including motor and heating
Able to follow relay ladder logic wiring diagrams
Industrial Electrical installation experience.
Basic understanding of mechanical, pneumatics, hydraulics repairs
Able to work under pressure, work safely, excellent problem solving skills, attentive and a logical thought process.
Ability to read electrical drawings
Good communicational skills (Oral, Reading & Writing), able to communicate at all levels.
HNC or higher Electrical Engineering qualification (desirable)
Testing and Inspection with PAT – (desirable)
Basic knowledge of a PLC’s / Siemens control system – recognition of Inputs and Outputs (desirable)
Basic knowledge of variable speed drives AC/DC (desirable)
This position could be right for you if you want to work as any of the following: Industrial Electrician, Electrical Craftsperson, Electrical Maintenance Engineer, Maintenance Electrician, Multi-Skilled Maintenance Engineer / Technician, Shift Engineer, Electrical Field Service Engineer, Maintenance Technician, Multi-Skilled Engineering Technician.
Key Words: Maintenance Electrician, Electrical Craftsperson, Electrical Maintenance Engineer, Industrial Electrician, Multi-Skilled Maintenance Engineer, Timeserved, Apprenticeship, 3 phase, single phase, PLC’s, Siemens, Control Systems, Motors, Drives, 17th / 18th Edition, Fault Finding, Industrial Engineering, Heavy Engineering, Lean, Manufacturing, Production, Pneumatics, Hydraulics, Mechanical, Permanent, Conti Shifts, Nights, Bury, Bolton, Rochdale, Oldham, Stockport, Manchester, Lancashire,
The successful Electrical Maintenance Engineer / Maintenance Electrician will need to be flexible as there will be a requirement work additional hours as and when the business requires and other duties not mentioned in this job description. You will also have the relevant qualifications and experience, be self-motivated / pro-active, able to work under pressure, well organised, analytical, logical, able to communicate at all levels, work alone and also as part of a team.
If you are interested in Maintenance Electrician / Industrial Electrical Craftsperson role and meet majority of the above criteria please click on the apply now button....Read more...
CAD Draughtsperson
We have a live opportunity for a CAD Draughtsperson to join an internationally renowned manufacturing business who provide high-performance, innovative solutions to a range of industries.
The successful CAD Draughtsperson will report directly into the Engineering Manager and work collaboratively with Project Engineers to produce innovative solutions to customer proposals and specifications. As a CAD Draughtsperson you will be able to utilising various design software packages to produce effective solutions for clients in a range of industries.
Responsibilities for the CAD Draughtsperson:
- Create right first time manufacturing and installation designs.
- Produce accurate specification data sheets.
- Compile factory acceptance procedure documentation.
- Assist in the production of installation and operation manuals.
- Produce proposal drawings in line with details from the sales and applications engineers.
- Perform basic design analysis and mechanical calculations.
Experience for the CAD Draughtsperson:
- Strong understanding of CNC machining processes highly desirable.
- Knowledge of Inventor, Autodesk and / or Vault.
- Confident with MS Office packages.
- High levels of attention to detail.
- Strong communicator with all levels of business.
Benefits for the CAD Draughtsperson:
- 38 hour working week
- Combined pension contribution 11%
- 5 weeks holiday a year plus the option to purchase an additional weeks holiday.
- Online discounts platform (major high street supermarkets and cinema etc).
- Cash Back Scheme Employee Cash Back 100 policy offers cover
- Cycle to work
- Free parking on site
This is a full time permanent position for the successful CAD Draughtsperson. For more information simply apply now or call Nathan on 07921479890.....Read more...
Market Leading manufacturing company is looking to recruit a Production Operative, working on a Production factory in Gatwick area (RH10 4NQ). Production operative will be working on the assembly or production line of a manufacturing company. Duties include feeding batches of raw materials into machinery, assembling goods on an assembly line and attaching ready products using resin solvents. The role does involve Manual Handling also involving the use of Brick Cutting Machines. Working hours - 8 hours a day from Monday to Friday (7am -15:30) for total of 40 Hours per week, on an ongoing basis. Overtime is available as and when required. Core Responsibilities & Duties: -Ability to operate and control equipment. -Maintain a clean work area. -Follow all company safety guidelines and procedures. -Working as Part of a Team -Quality Checks -Filling out Paperwork -Machine Operating -Provide support to the Factory team when needed. -Other duties as assigned. Skills & Qualifications: -Must be able to operate for long periods of time in brick-cutting environment. (Full training provided) -Must be able to work on your feet for long periods of time, including coming in, out, and around the warehouse environment. -Must be able to work on your feet 6-8 hours per day in a factory assembly environment. Full training is given. Full PPE and Workwear is provided. Immediate Start is available. Full Training will be given. Previous experience as a Production Operative is essential. ....Read more...
CNC Turner (Mill/Turn)
An opportunity has opened up for a CNC Turner (Mill/Turn) to join a leading manufacturer of precision machined components for the Oil and Gas, Telecommunications, Aerospace and Defence, Land and Sea Systems, Nuclear and Marine industries and emerging markets. The successful CNC Turner will have a proven background of ensuring the best manufacturing techniques are carried out within the Integrex Machine Shop by practical application of the most appropriate methods of programming, setting and operation of the machine tools and to stimulate an atmosphere of continuous improvement.
Essential skills needed for CNC Turner
- Must have right to live and work in the UK *Essential*
- 3+ years of previous Mill/Turn experience within a high precision manufacturing environment
- Knowledge and use of manual measuring equipment
- Understanding of drawing tolerances and specifications
Desirable Skills
- Security Clearance
- CNC Programming both online and offline
- Experience of working on large components
- Experience on Integrex E-Tower E650, Integrex i400, 200Y, 300IV
- Ability to program using Mazatrol controls
Benefits for CNC Turner
- Excellent pension and life assurance scheme
- Free on-site car parking
- Career and development opportunities
- 34 days holiday (incl. bank holidays)
- Health cash plan scheme
- Health & wellbeing services
- Employee discount scheme
- Employee Assistance Programme
- Cycle to Work Scheme
- Profit sharing scheme
- Reward and recognition
Hours for CNC Turner
- Monday to Thursday 6.45am to 3.30pm
- Friday 7am to 1pm
If you are interested in this CNC Turner opportunity, please contact James on 07485 390941 or email James.Ferrier@holtengineering.co.uk....Read more...
Our client, an established and privately owned manufacturing business based on the Fylde coast are currently looking to recruit an experienced Accounts / Finance Assistant. With a reputation for delivering high quality products and high levels of customer service and satisfaction this is an exciting opportunity to join an organisation with exciting growth plans.
Covering all aspects of day-to-day finance, this varied role would be well suited to a competent finance/accounts individuals who are keen to grow and develop alongside a business.
Key responsibilities and Duties will include:
All aspects of sales and purchase ledger
Payment runs
Supplier statement reconciliations
Weekly bank reconciliations
Manage overdue debtors and outstanding queries
Production and distribution of Sales Invoices
Processing employee expense claims
General accounts administration
Generation and running of monthly payroll
Assist with the preparation of monthly financial reports
Experience and Skills Required:
Previous experience in a similar capacity as a Finance / Accounts Assistance or Purchase Ledger environment
Previous experience within a fast-paced engineering or manufacturing environment
High attention to detail with the ability to take ownership of the role
Strong knowledge of financial regulations and accounting processes
Excellent numerical skills and attention to detail
Strong IT and MS Excel skills
....Read more...
This Maintenance Engineer Supervisor role offers a base salary of circa £45,000, plus company pension matched to 10% and generous holiday allowance, plus 5% KPI bonus.Based in the area of Midsomer Norton, the shift pattern for this Maintenance Engineer Supervisor role is only 4 days a week between Monday and Friday days. Saturday and Sunday are not worked as well as one day in the week (there is flexibility around which day you take off during the week). The company is a leading manufacturing business with a huge network of manufacturing plants across the country and a fantastic reputation as leaders in their sector.Applicants must have previous Electrical experience as an engineer.What’s in it for you as Maintenance Engineer Supervisor:
Supervisory role with a leading UK manufacturer with 42 sites across the country
Certified top-tier training opportunities and career development
The opportunity to obtain a supervisory engineering position working DAYS between Monday & Friday
Hours of work are 6am to 4:30pm
Basic salary circa £45k per annum
Company pension matched up to 10% by the company
Industry leading benefits program, share option schemes, employee benefits program etc
The ability to drive plant and site improvements as part of the leadership team
Duties of Maintenance Engineer Supervisor:
The development of maintenance plans and systems, driving PPMs
Undertaking improvement projects as part of the maintenance team
Responsible for any subcontractor management and safety
Responsible for identifying and eliminating recurring plant issues through engineering improvements
Hands on maintenance and engineering team development
Experience and Qualifications Required for Maintenance Engineer Supervisor:
Engineering qualifications City & Guilds level 3, ONC, BTEC Level 3, NVQ Level 3 or equivalent qualification in either Electrical Engineering
Strong Health and Safety awareness
Previous experience as a Maintenance Team Leader, Maintenance Supervisor, Engineering Manager, Maintenance Manager, Maintenance Planner, Lead Engineer etc
Previous experience of undertaking maintenance within a manufacturing environment
Previous experience of the development and application of PPM activities and knowledge of reactive maintenance techniques
Welding and fabrication experience
If this is something of interest to you and you are wishing to develop you career with an industry leading manufacturer then Please apply now!keywords: maintenance electrician, maintenance engineer, multi-skilled engineer, engineering maintenance supervisor, maintenance engineer team leader, Maintenance Supervisor....Read more...
Holt Executive is supporting a global leader that designs and manufactures high-performance imaging sensors, and electronics and develops groundbreaking technology for space exploration.
Our client is seeking a Quality & Compliance Engineer to join their RF Power Division and provide guidance and support to the engineering and manufacturing teams in achieving statutory regulatory compliance and product quality for market-ready products.
The successful Quality & Compliance Engineer will possess a deep understanding of relevant regulations and standards, as well as how to achieve compliance from an electrical and mechanical design perspective.
Key Responsibilities for the Quality & Compliance Engineer:
Compliance Focus -
- Provide guidance and support to ensure all regulatory compliance requirements are understood and implemented for products.
Product Quality Focus -
- Ensure RF Power products, processes, and systems function flawlessly and consistently at the desired quality level.
- Tasks include tracking, monitoring, and reporting of non-conforming products and processes.
- Drive all Corrective Actions, Deviations, and Quality Notifications to completion for the assigned product range.
Overall Responsibilities -
- Ensure customer expectations are met or exceeded through effective monitoring and control.
- Lead root cause investigations in the event of product escapes.
- Plan, test, and implement corrective and preventive actions.
- Utilise strong communication skills to influence peers and raise the bar for quality methods and regulatory compliance.
- Employ a pragmatic and data-driven approach to prioritise improvements across the product portfolio.
Key Skills & Experience Required by the Quality & Compliance Engineer:
- Proven experience applying regulations to products for global markets.
- Establishes compliance test standards, conducts and witnesses tests, analyses findings, and ensures compliance throughout the product lifecycle.
- Effectively explains compliance protocols and measures to stakeholders and regulatory bodies.
- Experience with electrical/electronic systems is preferred, with a desire to transition into product compliance.
- Demonstrated knowledge of CE/UKCA requirements (safety, EMC, machinery directive) and hazardous substances (REACH & RoHS).
- Experience compiling, collating, and publishing technical documentation for certification submissions. Experience working with regulatory agencies and third-party bodies.
- Maintains product compliance declarations and ensures compliance considerations are integrated into new product designs (electrical, mechanical, EMC).
- Provides support and guidance for safety assessments (e.g., BSEN61010) and mentors project engineers on compiling documentation for compliance verification.
- Demonstrates experience in an engineering function supporting product development and manufacturing.
- Working knowledge of electrical/mechanical assembly, manufacturing, testing, and qualification.
- Familiar with good quality management principles (ISO 9001 minimum). Experience conducting internal audits and driving process improvement.
- Understands and meets customer contractual requirements and expectations.
- Analyses and improves existing quality assurance processes and deliver training to stakeholders.
Essential Qualification for the Quality & Compliance Engineer:
Bachelors degree/HNC in Quality & Compliance Engineering, Electrical Engineering, or an equivalent level of experience. While not a requirement, possession of a professional registration (IEng or CEng) would be a benefit.....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
Tremco's Commercial Sealants and Waterproofing division is currently searching for Operator I's at our Ashland, Ohio facility. This position starts up, troubleshoots, and operates manufacturing equipment safely and routinely while achieving or exceeding standard levels of scrap, timing and output rate a majority of the time in one of the manufacturing areas listed below. Tremco offers: weekly competitive wages, benefits (medical, dental, vision, disability), matched 401k, retirement plan, paid vacation and on-the-job training.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures. Produce product according to tolerances on blueprints. Perform routine measurements per quality standards. Read and interpret extrusion instructions. Maintain accurate paperwork. Correctly package and label products. Perform daily housekeeping duties: sweep, mop, chip salt, skim, and maintain 5S areas. Routinely meet or exceed production output rates per standards. Setup and operate various off-line and secondary equipment to include cutters, tape machines, punch press, hot box, and reeling machine.
EXPERIENCE:
No prior experience or training needed; rubber molding experience preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to function effectively in a team setting. Ability to multi-task while maintaining attention to detail Ability to work overtime. BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $15.85 and $17.00. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
PA and Reporting Administrator is required for a specialist commercial company who services specialise across the food manufacturing, pharmaceutical and logistics field. We are looking for an experienced Administrator to join the team at the Halifax site.
The PA and Reporting Administrator role is working full-time on-site working Monday – Friday 8am – 4pm. In reward you will be paid a salary of £30,000 p.a. plus benefits. Plus there will be a element of some UK travel for the first initial few months which will include overnight stays occasionally.
This is an exciting role, as it’s not a ‘standard, sit at your desk office job’, this is a role where every day is different. One moment you will be assisting with booking flights and accommodation for the Manager and next completing reports on Excel.
PA and Reporting Administrator Skills and Experience:
If you have previous experience working within a manufacturing / FMCG environment previously this will be a great advantage.
It is essential that you have previous experience within SAP.
Must also be advance in Excel – able to create dashboards and pivot tables.
This is a busy varied role so looking for someone who likes to work at pace and with volume and be super organised with excellent attention to detail and communication skills.
You would need to be willing to travel to other UK sites from time to time.
PA and Reporting Administrator you will be supporting the Group Manufacturing Standards Manager and Compliance Team Managers in an analytical and administration capacity.
PA and Reporting Administrator duties will include:
Key support to the Manager with PA duties – diary management, travel and expenses.
Work alongside Compliance Team Managers to review work instructions and associated documentation.
Take complete ownership of the banked hours KPI and report weekly. In conjunction with the third-party cleaning company.
Create a central dashboard and lead weekly reviews with Compliance Team Managers.
Place orders for all UK sites on the SAP system as required.
Support/ implement the development of a budget control document that ensures all site spends are within their individual budgets on a monthly basis.
Liaise with suppliers to chase orders, arrange servicing and repairs for equipment when required.
If you have the above skills and experience and are keen to learn more then please apply via the job board for consideration.
....Read more...
£6,000 Car allowance, 35 holidays per annum, excellent working atmosphere, job stability and the chance to work with a long-established team are just a few of the perks that the Mechanical Project Manager will enjoy whilst working with this impressive Engineering organisation.Employing around 200 people across the UK, this impressive organisation operates in a number of sectors and offers full turnkey solutions to their vast customer base, which includes blue chip organisations such as Rolls Royce and Coca Cola.This Mechanical Project Manager role will sit with their HVAC division, which offers end-to-end services from manufacturing to installation of bespoke HVAC and piping systems.The successful Mechanical Project Manager will be based out of the LEEDS office, but will frequently be required to travel across the UK for site visits and client meetings.Key Responsibilities of the Mechanical Project Manager will include:
Providing expertise to clients & colleagues throughout the entire life-cycle, including tendering, procurement, design, manufacturing, installation and commissioning
Organisation & allocation of labour (including sub-contractors) and materials with a view of ensuring that the completion date is achieve
Timely preparation and development of various reports & documentation (method statements, risk assessments etc.)
For the Mechanical Project Manager, we are keen to receive applications from individuals who possess:
IDEAL NOT ESSENTIAL: Formal qualifications within a relevant subject/discipline (Degree, Apprenticeship, HNC, HND, City & Guilds/NVQ/BTEC Level 3 etc.)
Previous experience working in a similar role, ideally within a HVAC or Process Pipe manufacturing environment
Strong organizational, planning and coordinating skills with the ability to effectively communicate with a vast range of individuals & personalities
Working Hours of the Mechanical Project Manager: 41.5 Hours per week, spread across a regular day shift pattern:
Monday to Friday – 08:30 to 17:00
In return, the Mechanical Project Manager will receive:
Annual Salary: £45,000.00 - £50,000.00
Company Car Allowance: £6,000.00
Holiday Allowance: 35 Days including public holidays
Statutory Company Pension Scheme
To apply for this role, please click “APPLY NOW” and attach a copy of CV. Alternatively, please contact Callum Good at E3 Recruitment for more information....Read more...
We are looking for a Mechanical Supervisor to join one of a leading Manufacturer in the Rugby area who will be supported by an excellent benefits package, detail of which can be found below.To be successful in this position as a Mechanical Supervisor ideally you will hold an Engineering qualification (desired) with a minimum of 5 years job related experience in a manufacturing environment or similar. Working knowledge and experience of Health and Safety and legal requirements for the safe operation of a top-tier manufacturing site.Whats in it for you as a Mechanical Supervisor?
A salary of £59,000
Bonus Scheme
Monday – Friday days working
Pension scheme is 6% employer 4% Employee
25 Days annual holiday plus public holidays.
Healthcare & Life assurance.
Responsibilities of a Mechanical Supervisor;
Define and execute appropriate strategies and programs necessary to optimise plant uptime, integrity and reliability, enabling Operations to safely meet customer demand on time and in full, within agreed budgets.
Ensure that all the Reactive, Predictive and Preventative activities are carried out in a safe and effective manner.
Coordinate with the Engineering, Operations and SHE Departments for the day-by-day activities and the coordination of the works for the capital projects
Accountable to develop and maintain the Site Reliability Registers, leveraging all the required Site resources as well as the Contractors
Ensure full compliance with all industry and regulatory requirements
As a member of the Senior Management Team, the Mechanical Supervisor will support colleagues and contribute to the wider planning and decision making in the organisation and strive for shared success
Overseeing teams of Mechanical Fitters, Mechanical Engineers and Mechanical Technicians
Qualifications needed as a Mechanical Supervisor;
Engineering qualified City & Guilds, ONC, HNC, HND, NVQ 3 or equivalent qualification in Mechanical Engineering, Maintenance Engineering or General Maintenance Engineering
Strong Health and Safety awareness
Previous experience as a Maintenance Team Leader, Maintenance Manager, Maintenance Supervisor, Engineering Manager, Maintenance Planner, Lead Engineer etc
Previous experience of undertaking maintenance within a manufacturing environment
Previous experience of the development and application of PPM and TPM activities
This role would suit a Mechanical Maintenance Manager, Mechanical Supervisor, Maintenance Manager, Engineering Team Leader, Mechanical Fitter Lead, Mechanical Lead....Read more...
The Maintenance Engineer vacancy is working with a market leading manufacturing firm based in the Snaith/Pollington area of Wakefield. The position offers excellent opportunities for both training and career development. The client have large CAPEX and investment budgets. Location: Pollington, East Yorkshire (Commutable from West Yorkshire & South Yorkshire)What’s in it for you as a Maintenance Engineer?
Hours of Work – Panama - 2 on 2 off 3 on 3 off (Days and Nights 12 hours)
Salary - £47,000 with Annual pay increases
33 days Holiday
Annual KPI Production Bonus
Company pension
Training, Career and Development opportunities Main Duties & Responsibilities of Maintenance Engineer include;
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained – maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Engineer;
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g. NVQ, City and Guilds, ONC, BTEC or above - Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
Maintenance Engineer experience or qualifications of a Maintenance Engineer
The position may suit a Maintenance Engineer, Mechanical Maintenance Engineer, Electrical maintenance engineer, maintenance fitter, maintenance electrician, multi-skilled engineer etc....Read more...
C#/C++ Developer – Dresden, Germany
(Tech stack: .NET , C#, WPF, C++, SQL Server 2022, MVVM, Prism, TDD, Agile, Scrum, Kanban, Programmer, Engineer, Architect, Softwareentwickler, Entwickler, .NET Developer)
Founded in 1930, our client is a leading manufacturing company with offices in Europe, Asia and North America. Working in tandem with the automotive industry they are developing revolutionary .NET / C# / C++ software applications that have added a lot of value to manufacturing processes.
We are seeking two Developers to work on these exciting Greenfield enterprise level .NET / C# / C++ projects.Developer applicants should have strong knowledge of .NET, C#, WPF, C++ and SQL Server.
Our client can provide you with industry recognised training in .NET 8, SQL Server 2022, MVVM, C++, Prism, continuous integration, dependency injection, TDD and Agile (Scrum / Kanban). Additionally, you will follow the firm’s official career progression programme with the view to being promoted within 12 – 18 months.
Location: Dresden, Germany / Hybrid Working
Salary: €55,000 - €70,000 + Bonus Benefits
Applicants must be based in Germany and have the right to work in Germany even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRGERMANYREC
NOIREUROPEREC
NOIREURNET
NC/SM/DRES5570....Read more...
The Maintenance Engineer vacancy is working with a market leading manufacturing firm based in the Bedworth area of Coventry. The position offers excellent opportunities for both training and career development. The client have large CAPEX and investment budgets. Location: Bedworth/Coventry What’s in it for you as a Maintenance Engineer?
Hours of Work – 4 on 4 off (Days and Nights)
Salary of upto £48,500 Annual pay increases
33 days Holiday (Pro Rata)
Annual KPI Production Bonus of 10%
Company pension of 8% match
Training, Career and Development opportunities Main Duties & Responsibilities of Maintenance Engineer include;
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained – maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Engineer;
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g. NVQ, City and Guilds, ONC, BTEC or above - Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
Maintenance Engineer experience or qualifications of a Maintenance Engineer
The position may suit a Mechanical Maintenance Engineer, Electrical maintenance engineer, maintenance fitter, maintenance electrician, multi-skilled engineer etc, Maintenance Engineer.
....Read more...
Are you a Mechanical Engineering Manager based in Bristol looking for a new and exciting job opportunity in the Aerospace industry?
My client based in Bristol, is looking for a Mechanical Engineering Manager to join the team. You will be responsible for developing, implementing, and maintaining engineering systems, and driving product and systems conformance.
You will be directly managing and leading the engineering team which will consist of CAD/CAM development engineers, manufacturing engineers, and NPI engineers.
Key skills and experience required for the Mechanical Engineering Manager job:
- Technical expertise in design & manufacturing engineering, with a relevant professional qualification (BSc, BEng, MSc) in engineering (eg. Aerospace, Mechanical)
- Experience of managing new product / process introduction (NPI) industrialisation & existing production process improvements
- Significant experience in engineering and demonstrated ability in a leadership position with evidence of delivering significant improvements in terms of cost/quality of engineering systems
- Knowledge of Solidworks/SolidCAM (CAD/CAM), Vericut
- Working knowledge of quality system models such is ISO9001, AS9100 into a Quality Management System (QMS), Aerospace Regulations
This is a fantastic opportunity for a Mechanical Engineering Manager to join a growing team in the aerospace industry based in Bristol, commutable from Bath, Dodington, Weston-Super-Mare, Nailsea, Thornbury, Trowbridge, and Chippenham.
To apply for this Mechanical Engineering Manager job based in Bristol, or if you would like to discuss any other Engineering Manager jobs, please email LRogers@redlinegroup.Com or call 01582 87883 or 07961 158783. ....Read more...
A job as a Process Development Engineer is urgently required in Great Yarmouth, Norfolk for a company that offers a 9 day working fortnight!
An exciting new job has arisen for an Process Development Engineer, based in Great Yarmouth, Norfolk to play a pivotal role in delivering solutions to material and integration challenges aligned with optoelectronic assemblies / hybrid microelectronics packaging.
The Process Development Engineer located in Great Yarmouth, Norfolk will be the subject matter expert for optoelectronic materials and development within manufacturing processes. You will liaise with design and manufacturing departments as well as externally with customers on multi-channel optical communications.
The ideal Process Development Engineer, based in Great Yarmouth, Norfolk will have;
A background in optoelectronic assemblies / devices
A good understanding of product development from NPI through to manufacture
The ability to obtain Security Clearance
This is for a company that specialise in the design and manufacture of secure communication devices for predominately the defence and aerospace sectors. They offer a range of excellent benefits from a 9 day working fortnight, hybrid working, flexitime as well as assisting with relocation costs of up to £8,000.
APPLY NOW! For the Process Development Engineer job located in Great Yarmouth, Norfolk by sending a cover letter and CV to TDrew@redlinegroup.Com or by calling Tom Drew on 01582 878848 or 07961158762 quoting ref. THD1251. Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 01582 878 848 for a confidential discussion.....Read more...
JOB DESCRIPTION
Position: Process Technician
Supervisor: Production Supervisor
Specific Requirements:
Works directly with Production Supervisors, other Process Technician, Utility, and others in the safe handling of the equipment and chemical intermediates in both storage and use in production. Have good command and general working knowledge of manufacturing equipment. Comprehension of manufacturing techniques and demonstrates safety compliances Executes tasks and project responsibilities as outlined and assigned from the compliance calendar, production worklist, expected delivery report, and verbal / written instructions from Supervisors and Management. Inventory Control through cycle counts, batch log & MUS record keeping, and filling or transferring documentation. Assists in management and development of processes and safety programs Manages inventory reduction per departmental inventory reduction strategy Participates in all environmental and safety training as required by Federal, State, County, and Local regulations as well as company policies and demonstrates compliance through work practice.
The above description identifies only the primary duties pertaining to this position. Additional tasks are performed, as required, and do not significantly alter this description.
Background Requirements:
HS Diploma Minimum of 2 years related experience. Ability to lift/move up to 50 lbs daily and occasionally life/move up to 75 lbs.
Benefits: 401k w/ company match after 6 months, Pension Plan, Medical/Dental/Vision Insurance, flexible schedule, life insurance, tuition reimbursement.Apply for this ad Online!....Read more...
VACANCY: PRODUCTION SHIFT MANAGERLOCATION: ROTHERHAM (S66)SALARY: £37000 - £42000HOURS: MON - FRI: 06:00 - 14:00, 14:00 - 22:00, 22:00 - 06:00 Are you an experienced Production Shift Manager/Operations Manager with real people influencing skills and a focus on positively impacting OEE?On behalf of a Global Manufacturing business AQUMEN Recruitment is proud to be recruiting a Production Shift Manager based at our client's site in the Rotherham Area.This is a fantastic opportunity to join a forward thinking business which is always keen to embrace change in process and use LEAN Manufacturing principles to improve efficiency and further improvements in Production Output.Purpose of the role:
Reporting to the Operations Manager you will be accountable for contributing to the company business plan of achieving a budgeted financial return on investment by maximizing the efficiency and performance of the people and equipment within the manufacturing department.You are responsible for organizing, managing and controlling production activities within the plant on a shift basis. Ensuring the highest quality products are produced at the lowest cost on time and in full, and safely, and by demonstrating a competent performance orientated workforce.With focus on coordination of team activities to maximise the overall performance, by methods of organizing and controlling activities focusing on the continuous improvement of the equipment and overall performance of the product.In addition you will be responsible for the delivery of service to others in the "supply chain", improving departmental communications and barrier removals, having accountability for reducing costs per unit of manufacture, and for developing a strategy of cost reductions, quality and efficiency increases, Improving Team Performance by continuous training and development of our employees.
Daily Responsibilities:
To be thoroughly professional at all times, leading by example, inspiring and influencing others to do the same.To deliver against performance standards in respect of, quality, outputs, cycle times, scrap and waste, customer complaints, MRB actions, personal development, 5S systems, cost reductions and health and safety.To be an effective manager, who achieves successful results through working closely with others.To drive output and line efficiencies to and beyond budgeted levels by maximising the potential of the people, plant and time available.To strive to continuously improve the performance of the team members by setting clear and challenging objectives, with set timescales, that are regularly reviewed. To maintain a high level of service to internal and external customers, developing a positive attitude towards others in the team and across the business.To ensure first time quality is a priority of all team members, targeting zero defects from all production lines.To organise and plan the continued training and development of the team members for whom you are responsible.To investigate thoroughly all customer complaints, ensuring corrective actions are fed back through the company response system.To ensure that all company and departmental regulations and guidelines are rigorously adhered to at all times by the team members.To ensure that all the required administrative duties are completed with in the set timescale.To be pro-active and continuously seek to improve equipment, methods, procedures, communications, encouraging team members to do the same, in accordance with the continuous improvements philosophy. Kaizen.To have an understanding of the strategic and financial need and goals of the business, and be able to transfer these into team, and individual objectives.To be an effective communicator at all levels of the business, and inside and outside of the business.To ensure job compliance, in all aspects of the manufacturing department, and seek out and eliminate anything that is not adding value to our business.To maintain tight control of costs in relation to labour utilisation, deployment of labour.To be a self motivated leader who has the desire and passion, ambition to succeed in achieving personal, departmental, and business success, and leading others to do the same.To work to promote teamwork ethics across all departments, working closely with the supply chain, quality, process and technical departments.Carry out Return To Work meetings & disciplinary meetingsPrioritise Maintenance in the event of a Urgent issue – allocate resource etc.
The successful Production Shift Manager will be a strong influencer and will be able to engage with the team. You should have a proven track record of positively impacting OEE and how you have influenced and achieved this.This is an great opportunity within fast paced manufacturing and we would welcome applications from: Production Manager, Shift Leader, Supervisor, Team Manager, Team Leader who have a proven track record of success in the following sectors: FMCG, Food Industry, Automotive, Plastics. Aqumen Business Solutions is acting as an Employment Business in relation to this vacancy.....Read more...
JOB DESCRIPTION
Job Title:
NEW PRODUCT DESIGN ENGINEER & LEADER
Location: Pleasant Prairie, WI
Department: Research & Development
Reports To: Chief Technology Officer of R&D
Direct Reports/Manages others: No
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry. We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
JOB PURPOSE:
New Product & Design Engineer/Leader will have the responsibility for design, development and testing of application of new product concepts for our new technology development and existing products. You will work closely with Marketing, Product Management, Manufacturing, and R&D to ensure that the designs meet market needs, cost targets, and production requirements.
RESPONSIBILITIES:
Work independently to initiate innovative and functional product designs and manage the design projects related to new product development across all Rust-Oleum product categories. Participate in research of internal and external voice of customer meetings, analyze customer needs and insights, and translate them into value-added design solutions. Design, prototype, and test product design to ensure quality, functionality, durability, manufacturability and correlate chemical and physical material to consumer application and use, cost, safety and environmental impact. Work closely with Marketing, Product Management, Manufacturing, and R&D teams to ensure that the designs meet/exceed market/product needs, cost targets, and production requirements. Identify and select materials and components to meet design objectives. Identify, assess and select potential 3rd party design and /or manufacturing partners, and act as our project manager liaison with selected firm(s), travel to production facilities to evaluate processes and ensure compliance and quality to the standards. Develop and perform competitive assessments and analyses Act as the \"thought and team leader' for the business regarding product delivery system and packaging design. Create and/or guide engineering drawings, specifications, tolerances for designs.
REQUIREMENTS:
Minimum of bachelor's degree in Material and Mechanical Engineering or other related fields. 5 or more years of hands-on experience in new product development and tooling design, prototyping, and testing of mechanical systems with proven track record of successful new product design and development, preferably in durable consumer markets Extensive knowledge of product design, materials selection and manufacturing processes and direct experience working with a broad array of materials, preferably for various wipes of tools and delivery systems for coatings, cleaners and other consumer and industrial products. Excellent working knowledge of Computer Aided Design modelling concepts and software proficient with 3D CAD software (SolidWorks) for 3D part modeling, drawing, and assembly creation of the mechanical components Experience working with tooling manufacturers both domestically and internationally. A passion for design, engineering, problem solving, with critical thinking and creativity. Ability to work effectively with a cross-functional team from project concept through commercialization. Strong project management, analytical and problem-solving skills including good special acuity for design. Excellent interpersonal, written, and verbal communication and presentation skills. Ability to travel as required.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package. We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum offers 9 paid holidays and one floating holiday per year. You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online!....Read more...
Design EngineerBurnleyMon-Thurs 08:00-17:15 Fri 08:00-13:00Up to £45,000Design EngineerThe RoleMy client is a leading manufacturer in their field, with a well-established brand in the Precision Engineering sector. You will be based onsite at their global headquarters in Burnley, being responsible for providing technical support, developing new products, and providing continual improvement to current designs. Design EngineerMain Responsibilities
Process new enquires for the design department, ensuring all necessary follow-up action has been adhered to such as enquiry processing, delivery of quotation/design proposal for new contract research and consultancy.Develop close working relationships with clients and ensuring client liaison is continually adhered to.Undertake design and engineering analysis and support including FEA on design projects within the department and as a dedicated service.Development and detail product design and engineering from conceptual design through to detailed design and manufacturing implementation support as required.Undertake project management for projects directed by the Design Director. All project management activity to comply with industry guidelines.Maintain and adhere to ISO 9001.To effectively and efficiently work with Pro-engineer CAD package.To perform stress and strain calculations to recognise formulae and clearly layout workings within MathCAD to allow colleagues to interpret and validate design.To effectively utilise the company MRP system.To perform accurate high quality design output with minimal errors.To perform modifications to existing designs and drawing where necessary.
Design EngineerThe Candidate
Knowledge of fundamental engineering theory in mechanical engineering and product design.Knowledge of 3D CAD modelling systems.Knowledge and experience of Pro-Engineer and MathCAD.Knowledge of manufacturing processes and assembly.Experience in a similar background.Experience designing and manufacturing pressure equipment to the recognised standards.Previous experience dealing directly with customers, preparing technical specifications and presenting proposals.Ability to use Microsoft Office.Ability to use Lotus.Ability to use Mainframe.Ability to use CREO.Ability to use MAGMA.
Please contact Adam Lang at Winsearch UK for further information. Adam Lang - adam.lang@winsearch.uk Winsearch acts as an employment agency for permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services. View our latest jobs today on our website http://www.winsearch.uk and follow us on LinkedIn.Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!
The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https://www.gov.uk/browse/visas-immigration/eu-eea-swiss
Many Thanks....Read more...
JOB DESCRIPTION
Job Title: NEW PRODUCT DESIGN ENGINEER
Location: Pleasant Prairie, WI
Department: Research & Development
Reports To: Chief Technology Officer of R&D
Direct Reports/Manages others: No
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry. We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
JOB PURPOSE:
New Product & Design Engineer will have the responsibility for design, development and testing of application of new product concepts for our new technology development and existing products. You will work closely with Marketing, Product Management, Manufacturing, and R&D to ensure that the designs meet market needs, cost targets, and production requirements.
RESPONSIBILITIES:
Work independently to initiate innovative and functional product designs and manage the design projects related to new product development across all Rust-Oleum product categories. Participate in research of internal and external voice of customer meetings, analyze customer needs and insights, and translate them into value-added design solutions. Design, prototype, and test product design to ensure quality, functionality, durability, manufacturability and correlate chemical and physical material to consumer application and use, cost, safety and environmental impact. Work closely with Marketing, Product Management, Manufacturing, and R&D teams to ensure that the designs meet/exceed market/product needs, cost targets, and production requirements. Identify and select materials and components to meet design objectives. Identify, assess and select potential 3rd party design and /or manufacturing partners, and act as our project manager liaison with selected firm(s), travel to production facilities to evaluate processes and ensure compliance and quality to the standards. Develop and perform competitive assessments and analyses Act as the \"thought and team leader' for the business regarding product delivery system and packaging design. Create and/or guide engineering drawings, specifications, tolerances for designs.
REQUIREMENTS:
Minimum of bachelor's degree in Material and Mechanical Engineering or other related fields. 2 or more years of hands-on experience in new product development and tooling design, prototyping, and testing of mechanical systems with proven track record of successful new product design and development, preferably in durable consumer markets Extensive knowledge of product design, materials selection and manufacturing processes and direct experience working with a broad array of materials, preferably for various wipes of tools and delivery systems for coatings, cleaners and other consumer and industrial products. Excellent working knowledge of Computer Aided Design modelling concepts and software proficient with 3D CAD software (SolidWorks) for 3D part modeling, drawing, and assembly creation of the mechanical components Experience working with tooling manufacturers both domestically and internationally. A passion for design, engineering, problem solving, with critical thinking and creativity. Ability to work effectively with a cross-functional team from project concept through commercialization. Strong project management, analytical and problem-solving skills including good special acuity for design. Excellent interpersonal, written, and verbal communication and presentation skills. Ability to travel as required.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package. We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum offers 9 paid holidays and one floating holiday per year. You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online!....Read more...
Lead Operation Engineer / Food Manufacturing
We are looking for a multi-skilled maintenance engineer with a background in plant machinery repairs and maintenance and also Line Operations to join our successful manufacturing business based near Burton on Trent and to work as a LEAD LINE OPERATIONS ENGINEER. We are a renowned food manufacturer.
Salary and Benefits:
Basic Salary: £49,500
Bonus: Yes
Shift Patterns:
Monday to Friday 5 days per week - covering 3 x 8 hour shift patterns (Mornings 6am to 2pm, Afternoons 2pm to 10pm and Nights 10pm to 6am)
Pension: 4% employee and 5% employer with the option the enhance this up 8% employee and 12% employer
Holidays: 33 days
Perks: Discounted gym membership
Cycle to work scheme.
Discounts with retailers etc
Health cash plans
Dental cover
Progression: Lots of progression opportunities
Duties:
You will be responsible for the line operations, (co-ordinate, operate, decision making, and ensuring the products are manufactured to plan and we are meeting our safety targets).
You will be reporting directly to the Performance Manager, and you will organise, support and train the line operators and technical line operators on how to do their daily tasks. You will manage day-to-day issues on the line.
You will also be responsible for the line results during the shift and for all breakdowns requiring engineering support. You will help drive the execution of continuous excellence within the shift and provide technical expertise to reduce production losses through coaching, training, problem solving, and building technical competence of their team.
Skills Required:
NVQ Level 3 in Mechanical & electrical
18th Edition electrical wiring regulations
3 years’ experience in a FMCG manufacturing industry
Knowledge of line operation.
Experience working in a lean environment
Experience in coordinating, motivating and leading people.
Experience in implementing total productive maintenance techniques and problem solving tools
Knowledge of work order management
Committed to ensure an attitude of absolute intolerance for unsafe situations, in relation to product quality, people and environment safety
If you are interested in this role, please send your CV to us through the link and we will contact you ASAP to discuss your application and your availability to attend an interview.
....Read more...
GPW Ref: E113174
Surface Grinder / Ctyindrical Grinder / Precision Machinist with experience of working to tight very tolerances required for a permanent position in the Tamworth area for an established, world leading company manufacturing gauges and gears. Salary is £29,000 – £40,000 pa (DoE) + O/T &+ excellent benefits (see full JD). The Multi-Skilled Grinder / Precision Machinist will be working circa 37.5 hrs (Mon – Fri flexi start time between 6:30am - 8am)
Salary and Benefits:
£29,000 – £40,000 pa (DoE)
5 hours week (Mon – Fri days, flexible work pattern, can start between 6:30am – 8am)
5x Midweek overtime & Sat Hrs, 2x Sun Hrs
25 days holiday plus bank hols.
Pension scheme and death in service benefit
Private medical insurance
The successful Surface Grinder / Cylindrical Grinder / Precision Machinist day to day duties will include:
Surface grinding of high precision gauging and tooling associated with splines and gears for the automotive and aerospace industries working to very tight tolerances
Set / operate manual surface grinding machines.
Ensure production issues are resolved quickly, efficiently and production KPI’s are met.
Comply with company H&S guidelines.
To be suitable for this Surface / Cylindrical Grinder / Precision Machinist role you must have the following experience / characteristics:
Ideally completed a relevant machining, toolmaker or engineering apprenticeship.
Must have recent experience of manual surface grinding to very tight tolerances
Able to use standard manual measuring devices such as verniers, DTI’s, calipers, micrometers, plain plug, screw and ring gauges, gauge blocks and bespoke gauges/fixtures.
Be able to work with the minimum of supervision
Must be able to interpret Engineering drawings with a good understanding of Geometric Tolerances.
Good communicational skills, both verbal and written.
Key words: Grinder, Surface Grinding, Machine Setter, C N C, Machine Operator, Computer Numerical Controls, Manual Machinist, External / Internal Cylindrical Grinding, Machine Programmer, Toolmaker, Fanuc, Studer, Manufacturing, Automotive, Aerospace, Tamworth, Sutton Coldfield, Birmingham, Burton-on-Trent, Coventry, Staffordshire, West Midlands
The successful Precision Surface Grinder / Cylindrical Grinder will need to be flexible as there may be overtime and other duties not mentioned in this job description. With experience of working in a manufacturing environment, you will have a standard-level education, have the relevant qualifications or experience, be punctual, conscientious, keen and have a practical approach to work.
If you are interested in this role and have the required experience please click on the apply now button.....Read more...
We are actively seeking a dynamic and skilled Procurement or Project Specialist to join a defense organization based in the West Midlands.
The chosen candidate will play a pivotal role in identifying and establishing a new subcontract supply chain for a significant engineering project.
Responsibilities include evaluating engineering requirements, nurturing supplier capabilities, and overseeing the selected solution from conception to the completion of prototypes, ensuring smooth integration into our supply chain network. Given the nature of the role, frequent travel to supplier sites is essential, requiring a full driver's license.
Key Responsibilities:
Spearhead comprehensive management of subcontract manufacturing, collaborating with cross-functional teams to align project goals and objectives.Quickly gain a profound understanding of the technical intricacies of the product and its manufacturing process, enabling effective anticipation of challenges and opportunities with the support of senior engineers.Foster robust relationships with subcontractors, ensuring clear expectations, open communication, and adherence to project timelines and quality standards.Apply a strategic yet assertive approach for effective problem-solving.Maintain a consistent presence at subcontractor facilities to actively oversee and ensure adherence to project timelines.Identify, evaluate, and onboard potential motor subcontractors aligned with technical and quality standards.Lead contract negotiations and establish strong relationships, ensuring supplier capabilities and financial stability meet project needs.Collaborate with cross-functional teams to proactively identify and mitigate supply chain risks.Ensure strict adherence to compliance standards through meticulous documentation and checks, collaborating cross-functionally to maintain cost efficiencies while upholding regulatory requirements.Manage tracking tools, submitting regular progress reports to the supply chain manager and the wider project team and stakeholders.Ensure a well-documented supplier identification, selection, and onboarding process, involving relevant stakeholders and meeting essential requirements.Monitor market trends, supplier capabilities, and economic factors to safeguard project timelines and objectives.
Qualifications:
CIPS - DesirablePossess a Bachelor’s degree in engineering, business management, or a related field.Demonstrate proven experience in procurement, project management, or supplier relationship roles in a technically demanding environment.Showcase knowledge of electromechanical manufacturing techniques (electrical motors preferred).Exhibit excellent leadership and interpersonal skills, with the confidence to challenge and negotiate with suppliers when needed.Display strong communication skills supporting an ability to convey key technical information between internal and external stakeholders.Be detail-oriented and analytical, maintaining excellent technical and quality control standards.Have experience working within a team-based, multidisciplinary environment.Demonstrate familiarity with Defense industry regulations and compliance standards.Possess proficiency in project management tools and methodologies, as well as MS Office.Be proficient in ERP systems, Excel, and project management tools.Be willing to regularly travel to subcontractor facilities and supplier sites.....Read more...
