Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies.
Key Responsibilities:
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience:
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems
....Read more...
As a designated Engineer in multiple project teams, you will play a vital role in:
Designing fluid system components, including electro-mechanical valves and mechanisms.
Developing procedures for the assembly and testing of development and qualification hardware.
Generating design and compliance documents using CAD, finite element analysis, or data acquisition packages (e.g., Pro Engineer, Ansys, LabView).
Qualifications
We are seeking candidates with the following qualifications and skills:
A degree in Mechanical or Aeronautical Engineering with a minimum of a 2:1 standard.
Minimum of 2 years of work experience in a relevant field.
Proven experience with CAD for generating 3D models.
Ability to perform structural analysis using finite element software for static and dynamic analysis to ensure designs meet launch vibration and fluid pressure requirements (advantageous).
Experience in test rig design, instrumentation, and data acquisition systems for fluid systems, with the ability to write detailed operating procedures. LabView experience is advantageous.
Familiarity with valve, mechanism, or propulsion designs.
Knowledge of documentation management and control.
....Read more...
As a designated Engineer in multiple project teams, you will play a vital role in:
Designing fluid system components, including electro-mechanical valves and mechanisms.
Developing procedures for the assembly and testing of development and qualification hardware.
Generating design and compliance documents using CAD, finite element analysis, or data acquisition packages (e.g., Pro Engineer, Ansys, LabView).
Qualifications
We are seeking candidates with the following qualifications and skills:
A degree in Mechanical or Aeronautical Engineering with a minimum of a 2:1 standard.
Minimum of 2 years of work experience in a relevant field.
Proven experience with CAD for generating 3D models.
Ability to perform structural analysis using finite element software for static and dynamic analysis to ensure designs meet launch vibration and fluid pressure requirements (advantageous).
Experience in test rig design, instrumentation, and data acquisition systems for fluid systems, with the ability to write detailed operating procedures. LabView experience is advantageous.
Familiarity with valve, mechanism, or propulsion designs.
Knowledge of documentation management and control.
....Read more...
Highly technical electronic hardware product manager required to own an intelligent electornic device product development roadmap for a world leader in high performance high value products. Instrumentation focus is high value cameras which work in tandem with very clever cloud services.
As Hardware Product Manager you will help define the direction and development of the companies electronics research, development and New Product Innovation which includes embedded software.
The ideal candidate will have a strong background in electro mechanical engineering with some product management experience. Experience with production manufacturing techniques, optics, broadcast standards and embedded software would be distinct assets.
Bachelor???s degree in a related field such as Engineering, Design or a closely aligned field.
Product management experience
Electromechanical design.
Optics and PCs.
Embedded software, broadcast standards and RF is desirable
Responsibilities
The Product Team have internal and external client facing duties. Outward facing responsibilities include marketing and trend analysis, conference attendance and pre sales assistance including product demonstrations and product rollouts.....Read more...
The business is looking for an apprentice to train alongside our existing experienced team of engineers on all aspects of operational, maintenance engineering (Instrumentation & Electrical) duties. As an apprentice you will study a range of programmes working towards a level 3 maintenance and operations engineering technician apprenticeship standard, covering a variety of skills and qualifications while earning a wage and completing invaluable practical skills in industry: -
Apprentice technicians will undertake installation, testing, servicing, removal, replacement, maintenance, and repair of a range of equipment, sometimes complex, as part of planned preventative and reactive maintenance programmes. They may also undertake decommissioning activities when plant is being removed from service.
Candidates should be confident, keen, enthusiastic, and committed with a positive attitude to work. This is an ideal opportunity to gain experience in all aspects of maintenance and operations engineering (electrical) and achieve an advanced apprenticeship qualification, with the second largest titanium dioxide producer in the world.
Initially based at The Catch facility (Stallingborough) then on site following a day pattern – with a shift placement – where apprentices are required to work both the day and night shift with experienced engineers to gain hands on learning.
*New applicants who meet the entry requirements of the role will be contacted by the Apprentice Employment Agency team to discuss your application and the apprenticeship in further detail. Please ensure you provide up to date contact details and check your junk in case of redirected emails. Failure to respond to communications will result in your application being withdrawn.Training:During this programme, you will undertake off the job training at The Catch for the first year. Further training will be provided by experienced engineering team members specific on the job training by a mentor on your designated shift. You will also be supported by a dedicated assessor who will guide and mentor you throughout your apprenticeship. You will undertake MAINTENANCE AND OPERATIONS ENGINEERING TECHNICIAN Apprenticeship, and you will be required to undertake an end-point assessment.
Core knowledge:
A technician will understand:
First principles relating to the operation and maintenance of appropriate plant and equipment
Relevant industry health and safety standards, regulations, and environmental and regulatory requirements
Maintenance and operational practices, processes and procedures covering a range of plant and equipment
The relevant engineering theories and principles relative to their occupation
Core skills:
A technician will apply their knowledge of plant and systems to safely perform maintenance and operational activities with minimum supervision. This will require them to:
Comply with industry health, safety and environmental working practices and regulations
Locate, and rectify faults on plant and equipment
Communicate with and provide information to stakeholders in line with personal role and responsibilities
Read, understand and interpret information and work in compliance with technical specifications and supporting documentation
Prepare work areas to undertake work related activities and reinstate those areas after the completion of the work related activities
Inspect and maintain appropriate plant and equipment to meet operational requirements
Assess and test the performance and condition of plant and equipment
Communicate, handover and confirm that the appropriate
Engineering process has been completed to specification
In addition an electrical technician will:
Position, assemble, install and dismantle electrical plant and equipment, which will include motors, switchgear, cables & conductors, to agreed specifications
Carry out planned, unplanned and preventative maintenance procedures on Instrumentation & Electrical plant and equipment.
Replace, repair and/or remove components in Instrumentation & Electrical plant and equipment and ensure its return to operational condition.
Diagnose and determine the cause of faults in Instrumentation & Electrical plant and equipment
Successful achievement of the end-point assessment will lead to Final certification of the apprenticeship.
Complete HNC Electrical/ Electronic Engineering
*New applicants who meet the entry requirements of the role will be contacted by the Apprentice Employment Agency team to discuss your application and the apprenticeship in further detail. Please ensure you provide up to date contact details and check your junk in case of redirected emails. Failure to respond to communications will result in your application being withdrawn.Training Outcome:
On completion of the apprenticeship, successful candidates could secure a role in a successful, dynamic company
Employer Description:Tronox is the largest vertically integrated titanium dioxide producer in the world, the largest producer of merchant titanium chemicals, and the leading manufacturer of specialty titanium products. Tronox provides numerous products and services for a variety of industries around the world. From coatings to paper and polymers to pigments, our products and services are used to improve everyday life. Thousands of products in our world, from plastic bags to aerospace parts, get their start with help from Tronox. Tronox employ nearly 7,000 across six continents, and have a rich diversity, unmatched vertical integration model, and unparalleled operational and technical expertise across the value chain, position Tronox as the preeminent titanium dioxide producer in the world. We’re committed to our people, our customers, and our communities. With a broad global reach and deep local roots, Tronox embrace and celebrate the unique character and culture of every place they call home. From the west coast of Australia to the east coast of the U.S., from Europe to South Africa, and from mines to research and development labs, they bring the same passion to work in every location, everywhere, every day.Working Hours :Monday- Friday 8am- 4pm (30mins unpaid lunch) Initially based at Catch then onsite on a day pattern with a shift placement. You are required to work both the day/night shift with experienced operators to gain hands on learning. Shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Applications Engineer required to support Automotive Engineering clients exploit precise navigation, GSM / GNSS technologies leveraged with other instrumentation to gain insights on cutting edge transportation systems such as: ADAS, driverless cars, accident avoidance, energy usage optimisation, EV, drone and others. Your everyday will be providing market leading and innovative solutions to solve novel and real-world problems for customers.
You will have strong a Engineering foundation, knowledge of electronics ideally with practical mechanical experience and the ability to understand and adapt existing products to meet Automotive Engineering customer requirements.
Skills
Navigation, drive assist, RF signals and or GNSS exposure.
Degree in a Maths, Physics or Engineering related subject or equivalent experience.
Electronics and computing experience.
Written and oral communication proficiency.
Aviation, automotive or space industry knowledge.
Responsibilities
Translating high level requirements into a specification for hardware, firmware and software engineers to work from.
User Acceptance testing new products and new features before handing over to the Test team for sign off and release.
Pre-sales and post-sales support for larger customers or complex requirements.....Read more...
Mechanical Valve Design and Development Engineer required to join growing monopropellants team working on Fluidic Controls on the design, development and industrialisation fluidic control solutions for space propulsion.
My client supplies chemical propulsion systems (rocket engines and thrusters) to spacecraft manufacturers.
Requirements
Space industry experience highly desirable but not essential.
2:1 or higher Degree in Mechanical or Aeronautical Engineering.
CAD experience generating 3D models ideally detail drafting for manufacture with PTC Creo.
Structural analysis using FE software, static and dynamic analysis justifying designs for launch vibration and fluid pressure tolerance.
Exposure to the design, manufacture and test of aerospace or space products.
Test rig design, instrumentation and data acquisition for fluid systems ideally with LabView experience.
Valve, mechanism or propulsion designs.
Clean room practices and equipment.
Responsibilities
Design of fluid system components such as electro mechanical valves and mechanisms.
Participate in customer programmes as the development engineer.
Generate technical documentation in line with company and customer Quality standards.
Create design and compliance documents using CAD, finite element, data acquisition packages, Pro Engineer, Ansys, LabView.....Read more...
Our client is a rapidly growing organization at the forefront of innovation in the space industry. They specialize in the design, development, and industrialization of a diverse range of space-based propulsion applications. They are seeking a dynamic and experienced Mechanical Design Engineer.
Responsibilities: As a Design Development Engineer, you will be responsible for the following key duties:
Designing fluid system components, including electro-mechanical valves or mechanisms.
Developing procedures for the assembly and testing of development and qualification hardware.
Generating design and compliance documents using CAD, finite element analysis.
Collaborating to support the company's commitment to safe working practices, both on-site and in design principles.
Key Requirements:
Degree in Mechanical or Aeronautical Engineering.
Minimum of 2 years' post-qualification work experience in the space industry (other sectors considered by exception).
Proven experience with CAD for generating 3D models.
Experience with test rig design, instrumentation, and data acquisition systems for fluid systems, with the ability to write detailed operating procedures.
Knowledge of the design, manufacture, and testing of aerospace or space products.
Familiarity with valve, mechanism, or propulsion designs.
....Read more...
Mechanical Valve Design and Development Engineer required to join growing monopropellants team working on Fluidic Controls on the design, development and industrialisation fluidic control solutions for space propulsion.
My client supplies chemical propulsion systems (rocket engines and thrusters) to spacecraft manufacturers.
Requirements
Space industry experience highly desirable but not essential.
2:1 or higher Degree in Mechanical or Aeronautical Engineering.
CAD experience generating 3D models ideally detail drafting for manufacture with PTC Creo.
Structural analysis using FE software, static and dynamic analysis justifying designs for launch vibration and fluid pressure tolerance.
Exposure to the design, manufacture and test of aerospace or space products.
Test rig design, instrumentation and data acquisition for fluid systems ideally with LabView experience.
Valve, mechanism or propulsion designs.
Clean room practices and equipment.
Responsibilities
Design of fluid system components such as electro mechanical valves and mechanisms.
Participate in customer programmes as the development engineer.
Generate technical documentation in line with company and customer Quality standards.
Create design and compliance documents using CAD, finite element, data acquisition packages, Pro Engineer, Ansys, LabView.....Read more...
My client is looking for a Physicist with Engineering experience to provide practical application of scientific principles to optical design, non-destructive testing, radiometry and other instrumentation products. You will also evaluate new scientific principals and technologies, folding them into electronic prototype designs and builds to evaluate potentially using lab experiments.
Key requirements:
Experience of engineering / electronics development and project management.
Strong relevant degree or PhD with an interest or exposure to precision instruments, electronic product design, lasers, optics, firmware, PCB???s, sensors, thermal imaging and/or radiometry.
Previous success applying physics and engineering skills to real world projects.
Able to communicate effectively with the development engineers, manufacturing, internals sales teams, customers and partners.
What you might be doing:
Device design, development, test, calibration, build and commission work as appropriate.
Research, development and maintenance of relevant physics and technology knowledge.
This is a fantastic opportunity for a well-qualified scientist who wants to apply their theoretical knowledge and interest in scientific discovery and emerging technologies to novel instrument design.....Read more...
Our client is a rapidly growing organization at the forefront of innovation in the space industry. They specialize in the design, development, and industrialization of a diverse range of space-based propulsion applications. They are seeking a dynamic and experienced Mechanical Design Engineer.
Responsibilities: As a Design Development Engineer, you will be responsible for the following key duties:
Designing fluid system components, including electro-mechanical valves or mechanisms.
Developing procedures for the assembly and testing of development and qualification hardware.
Generating design and compliance documents using CAD, finite element analysis.
Collaborating to support the company's commitment to safe working practices, both on-site and in design principles.
Key Requirements:
Degree in Mechanical or Aeronautical Engineering.
Minimum of 2 years' post-qualification work experience in the space industry (other sectors considered by exception).
Proven experience with CAD for generating 3D models.
Experience with test rig design, instrumentation, and data acquisition systems for fluid systems, with the ability to write detailed operating procedures.
Knowledge of the design, manufacture, and testing of aerospace or space products.
Familiarity with valve, mechanism, or propulsion designs.
....Read more...
Applications Engineer required to support Automotive Engineering clients exploit precise navigation, GSM / GNSS technologies leveraged with other instrumentation to gain insights on cutting edge transportation systems such as: ADAS, driverless cars, accident avoidance, energy usage optimisation, EV, drone and others. Your everyday will be providing market leading and innovative solutions to solve novel and real-world problems for customers.
You will have strong a Engineering foundation, knowledge of electronics ideally with practical mechanical experience and the ability to understand and adapt existing products to meet Automotive Engineering customer requirements.
Skills
Navigation, drive assist, RF signals and or GNSS exposure.
Degree in a Maths, Physics or Engineering related subject or equivalent experience.
Electronics and computing experience.
Written and oral communication proficiency.
Aviation, automotive or space industry knowledge.
Responsibilities
Translating high level requirements into a specification for hardware, firmware and software engineers to work from.
User Acceptance testing new products and new features before handing over to the Test team for sign off and release.
Pre-sales and post-sales support for larger customers or complex requirements.....Read more...
My client is looking for a Physicist with Engineering experience to provide practical application of scientific principles to optical design, non-destructive testing, radiometry and other instrumentation products. You will also evaluate new scientific principals and technologies, folding them into electronic prototype designs and builds to evaluate potentially using lab experiments.
Key requirements:
Experience of engineering / electronics development and project management.
Strong relevant degree or PhD with an interest or exposure to precision instruments, electronic product design, lasers, optics, firmware, PCB???s, sensors, thermal imaging and/or radiometry.
Previous success applying physics and engineering skills to real world projects.
Able to communicate effectively with the development engineers, manufacturing, internals sales teams, customers and partners.
What you might be doing:
Device design, development, test, calibration, build and commission work as appropriate.
Research, development and maintenance of relevant physics and technology knowledge.
This is a fantastic opportunity for a well-qualified scientist who wants to apply their theoretical knowledge and interest in scientific discovery and emerging technologies to novel instrument design.....Read more...
An Engineering Project Manager is required to join a leading design and manufacture of high tolerance electronic instrumentation products. The Engineering Project Manager role is based in Redditch and is commutable from Kidderminster, Birmingham, and Halesowen.
This Redditch based Engineering Project Manager will be responsible for, but not limited to:
Overseeing the design and development, testing, implementation, and production of bespoke products to meet client requirements.
Liaising with all colleagues and project teams to ensure control over product development processes.
Leading full product life cycle development of ruggedised electronic systems.
The Engineering Project Manager will come from a development background working on bespoke enclosures for hazardous environments, where they will be subject to high levels of temperature and vibration. In addition, candidates must be a UK citizen, with Security Clearance (or be able to gain Security Clearance) and have a valid UK driving licence.
APPLY NOW for this Redditch based Engineering Project Manager by sending your CV to SKhuttan@RedlineGroup.Com or call Sophie on 01582 878817 / 07961158586.....Read more...
Vehicle testing Applications Engineer required to join a motorsport, Autonomous Vehicle, EV, ADAS and road car testing services team who also design and manufacture GNSS based positioning and data logging sensors and instrumentation.
You will provide cutting edge innovative solutions to test full vehicles or automotive systems such as ADAS for external car and motorsports clients.
Applications Engineers are involved in the complete process from conception, specification, user acceptance testing, pre and post sales support. Strong engineering fundamentals, project management and automotive testing experience are required.
Skills
Experience in the Automotive sector, preferably within Vehicle testing.
GNSS and INS technologies knowledge.
Exposure to Sales and customer management.
Reading and understanding technical documentation such as Regulations, specifications and product data sheets and manuals.
Understand and solve sometimes complex engineering problems
A full, clean Driver???s licence
Responsibilities
Support new and existing clients in vehicle testing.
Create product specifications and briefs based on customer needs.
Develop new ADAS test solutions exploiting driving robot solutions.
Research current and future customer applications, design and development of new hardware, Firmware and Software solutions.
Conduct technical product training,
Negotiate and agree multiple, concurrent engineering projects.
Complete user acceptance testing feeding back to development teams.
Provide expert help and guidance to the first line customer support team.
Assist marketing team with Expos, content creation, application notes, magazine articles etc
Motorsports, Automobile, Racing, Automotive Engineering, GNSS, Testing, Chassis, Vehicles, Vehicle Dynamics, Data Acquisition, ADAS, Vehicle Testing, GPS, Driving Robots, Steering Robots....Read more...
An exciting opportunity has arisen for an Electronics Design Engineer based in Stockholm to join this global leader in Analytical Instrumentation.
Based from their R&D facility in Hägersten, Stockholm, the ideal candidate will own tasks related to both sustaining the existing product portfolio and designing new, NIR, rheological and RF analytical instruments for food analysis.
Hybrid working available; 3x days in Hägersten.
Key skills and experience for Electronics Design Engineer:
Legal right to work in Sweden (permanent residence permit, EU citizenship or equivalent)
Degree qualified in Electronics Engineering or equivalent
Relevant experience within electronics design of analogue and digital components
Experience of PCBA design from concept to manufacture
Be able to provide test and verification documents for production use
Experience with one or more of the following protocols: SPI, I2C, USB, UART, DisplayPort, HDMI, Ethernet, SATA, MODBUS
This is an excellent opportunity for a proactive and driven professional to contribute to the ongoing success and innovation of our advanced analytical instrument portfolio.
To apply for this Electronics Design Engineer role based in Stockholm please send your CV and covering letter to Skhuttan@redlinegroup.Com, or for more information contact Sophie Khuttan on 01582 878817 or 07961158586.....Read more...
My client, a world leader in the development of scientific instrumentation, are looking for an New Product Development Team Leader based in Southampton, Hampshire to join their expanding team.
The New Product Development Team Leader based in Southampton, Hampshire will report into the General Manager and will be responsible for responsible for leading and motivating the Product Development Team.
Responsibilities for the New Product Development Team Leader based in Southampton, Hampshire, will include:
- Line management of the Product Development team
- Project management of the Product Development activities
- Delivery of the Product Development Roadmap
- Have input into the company development Roadmap
Knowledge, skills & experience for the New Product Development Team Leader, based in Southampton, Hampshire will include:
- Experience of New Product Development
- Experience of working within an optical manufacturing environment
- Basic understanding of optics, electronic design, mechanical design and coding (firmware and
Software)
APPLY NOW! For the New Product Development Team Leader job, located in Southampton, Hampshire by sending a cover letter and CV to TDrew@redlinegroup.Com or by calling Tom Drew on 01582 878 848 quoting ref. THD1171. Otherwise, we always welcome the opportunity to discuss other roles similar to New Product Introduction jobs on 01582 878 848 or 07961 158762.....Read more...
Vehicle testing Applications Engineer required to join a motorsport, Autonomous Vehicle, EV, ADAS and road car testing services team who also design and manufacture GNSS based positioning and data logging sensors and instrumentation.
You will provide cutting edge innovative solutions to test full vehicles or automotive systems such as ADAS for external car and motorsports clients.
Applications Engineers are involved in the complete process from conception, specification, user acceptance testing, pre and post sales support. Strong engineering fundamentals, project management and automotive testing experience are required.
Skills
Experience in the Automotive sector, preferably within Vehicle testing.
GNSS and INS technologies knowledge.
Exposure to Sales and customer management.
Reading and understanding technical documentation such as Regulations, specifications and product data sheets and manuals.
Understand and solve sometimes complex engineering problems
A full, clean Driver???s licence
Responsibilities
Support new and existing clients in vehicle testing.
Create product specifications and briefs based on customer needs.
Develop new ADAS test solutions exploiting driving robot solutions.
Research current and future customer applications, design and development of new hardware, Firmware and Software solutions.
Conduct technical product training,
Negotiate and agree multiple, concurrent engineering projects.
Complete user acceptance testing feeding back to development teams.
Provide expert help and guidance to the first line customer support team.
Assist marketing team with Expos, content creation, application notes, magazine articles etc
Motorsports, Automobile, Racing, Automotive Engineering, GNSS, Testing, Chassis, Vehicles, Vehicle Dynamics, Data Acquisition, ADAS, Vehicle Testing, GPS, Driving Robots, Steering Robots....Read more...
PROJECT ENGINEER – PERMANENT – HAMPSHIRE A leading food and drinks manufacturer in Hampshire are looking for a Project Engineer to join their Engineering team on a permanent full time basis, where you'll play a crucial role in supporting cutting-edge projects. Your expertise in engineering and project management will drive innovation and excellence, this is your chance to lead and deliver high-quality solutions in a role that challenges and rewards your technical and leadership abilities.Key Responsibilities:
Design, manage, and execute engineering projects from concept to commissioning.
Deliver projects on time, within budget, and to the highest safety and quality standards.
Provide technical support to maintenance teams and contribute to continuous improvement initiatives.
Ensure compliance with health, safety, and regulatory requirements.
Use tools like AutoCAD and Microsoft Project to develop detailed designs and project plans.
What We’re Looking For:
Formal project management qualification (Prince2/PMP) or equivalent experience.
Electrical bias with controls and instrumentation experience.
Engineering HND/Degree, preferably in Electrical Engineering.
Process or chemical engineering background.
Proficiency in AutoCAD and the Microsoft Office Suite.
Knowledge of ATEX, process control, and modern sustainability concepts is a plus.
Exceptional organizational, communication, and problem-solving skills.
Why Apply?
Be part of a culture that champions innovation, collaboration, and excellence.
Contribute to cutting-edge projects in manufacturing, laboratory, and facility improvements.
Benefit from a supportive environment that values continuous improvement and professional growth.
STR Limited is acting as an Employment Agency in relation to this vacancy.....Read more...
A unique opportunity has arisen for a Senior Electronics Design Engineer to join the world leading Product Design Consultancy based in Warwickshire.
Working with customers across a variety of industries their globally operating development teams have helped to create some of the market-leading products within the medical, scientific, consumer and transport markets.
Due to continued growth, they are seeking a Senior Electronics Design Engineer to be based from their Warwickshire campus where you will be instrumental in the design and development of analogue and digital electronic specifications, designs and investigations. Working closely with customers you will be significant in the development of new designs, evaluation of new technologies and guidance of projects across multiple disciplines.
Key skills and experience for Senior Electronics Design Engineer:
Proven background in broad electronics design across analogue and digital
Degree educated with a 1st or 2:1 from a highly reputable electronics university
Excellent verbal and written communication skills
Innovative and creative initiative with a desire to work with complex electronic products
Experience within medical instrumentation / devices would be an advantage
This is a great opportunity to work with a global recognised company who work with some of the world’s leading technology based organisations. A business that offers their employees the freedom to be creative, work across a variety of industries and be able to create career development and personal growth.
To apply for Senior Electronics Design Engineer based in Warwickshire, please send your cv to ntyler@redlinegroup.Com, or for more information contact Natalie Tyler on 01582 878808 or 07751240250.....Read more...
Senior Physicist – Fluid Mechanics
A leading innovator of complex scientific instrumentation ais looking for a Fluid Mechanics Physicist to join their team of class-leading engineers and scientists.
We are considering physicist with two years of commercial experience through to principal level and team leaders.
As a Physicist you will be involved in all aspects of the design and development of the company’s scientific products. This will include inventing brand-new products, simulation and analysis, prototype design and lab testing.
You will get the chance to apply your experimental and analytical physics knowledge to solve real-world problems and you will be applying your experience to products that aim to change the game.
To be considered for this exciting role you will need to have a solid understanding of physics fundamentals with good knowledge of fluid mechanics. This will ideally be coupled with a strong academic record and experience within a commercial setting
In exchange for your skills and expertise, the company offer a highly competitive package as well as providing excellent career progression and training as well as providing a platform for you to work on start of the art technologies and testing equipment.
For more information, make a confidential application now and a member of our team will be in touch with more information.
Newton Colmore is a highly specialist recruitment consultancy operating within the medical devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors throughout Europe and the US.
Key words: Physics, Physicist, Medical Devices, Mechanics, Fluidics, Acoustics, Experimental Physics, Fluid Mechanics,....Read more...
An exciting job opportunity has arisen for a Senior Test Development Engineer based in Norwich, Norfolk to join the market leader involved within an exciting technology sector.
Due to continued growth, they are seeking a Senior Test Development Engineer to be involved with development and progression of multiple projects.
The Senior Test Development Engineer’s job responsibilities will include:
- Developing measurement processes for automated systems, utilising test, and measurement instruments. Predominantly working on RF solutions.
- Working with colleagues to identify the resources needed to execute the calibration plan
- Interface with Hardware and Software Engineers and the wider team to review system requirements and construct effective test strategies
- Contributing to the entire hardware/software development life cycle from initial business requirements to deployment, production, and service support
Key skills and experience for the Senior Test Engineer job based in Norwich, Norfolk:
- BSc in Electrical and Electronic Engineering or equivalent experience
- Experience in the test and measurement field utilizing T&M instrumentation including calibration techniques
- Sound understanding of measurement uncertainty analysis and testing RF products
This is a fantastic job opportunity to join a well-established, successful Norwich, Norfolk based company who are investing very heavily in R&D.
To find out more about the Senior Test Development Engineer job or other potential jobs we currently have at the moment, please contact Ricky Wilcocks on 01582 878834 or 079317 88834 or kindly email your most up to date CV and covering letter to Rwilcocks@redlinegroup.Com....Read more...
Production Engineer
Location: Ferndown, Dorset
Are you ready to join a global leader in engineering and design manufacturing? With over six decades of experience in highly regulated industries such as nuclear, aerospace, and oil and gas, our client is a trusted name in delivering mission-critical solutions. They specialise in sensors, instrumentation, and control systems for harsh environments where safety and reliability are paramount.
The Role:
As a Production Engineer, you will play a vital role in delivering engineering solutions and technical support to manufacturing teams. You will ensure production objectives are met regarding cost, quality, and schedules while driving innovation and continuous improvement.
Key Responsibilities:
- Provide accurate cost and timescale estimates for bids and projects.
- Collaborate on product design to create robust and accurate documentation.
- Ensure smooth production processes by creating manufacturing routings, BOMs, and process instructions.
- Investigate and resolve production issues promptly.
- Support lean manufacturing and propose new technologies or capital equipment as needed.
What Were Looking For:
- HNC/HND in an engineering-related discipline or extensive production engineering experience.
- Familiarity with manufacturing processes and techniques in electrical or mechanical production.
- Proficiency in reading electronic schematics, wiring schedules, and mechanical drawings.
- Experience working with ERP/MRP systems and designing jigs or fixtures (3D CAD desirable).
- Strong computer skills (Microsoft Office, including Visio).
- Eligibility for UKSV SC security clearance.
Whats on Offer:
- A collaborative and empowering work environment.
- Flexible working options to suit your lifestyle.
- The chance to work with a global leader in engineering excellence.
If you are passionate about manufacturing and enjoy working in a dynamic, innovative environment, wed love to hear from you. Apply today to take the next step in your career! If you do have any questions please reach out to liam.nother@holtengineering.co.uk....Read more...
Lead Electronics Engineer - Eastbourne
Are you looking for a new job in a growing company who offer sponsorship?
Do you strive to be part of an organisation that develops cutting edge technologies for companies such as Samsung and Intel?
If so I’d like to speak with you!
A highly exciting Lead Electronics Engineer job has arisen with a market leading, global organisation. The Lead Electronics Engineer will join a Multi-billion organisation, offering fantastic internal career development opportunities and is based in Eastbourne. My client is a world leader in the design and manufacturer of vacuum products and abatement solutions. As a market leader, their products are integral to manufacturing processes for the semiconductors industry and industries alike.
The successful Lead Electronics Engineer will have the following experience:
- A BSc or MSc in Engineering (or relevant discipline)
- Mixed Signal Design Experience (Digital/Analogue)
- Familiarity with Schematic Capture using OrCAD, Altium or similar tool (Advantageous)
- Previous experience in Micro-Controller/Microprocessor based products
- Previous Experience in Communication Protocols (CAN, Ethernet, Wi-Fi, Profibus etc…)
- Experience with Instrumentation
This is a Golden opportunity for a Lead Electronics Engineer Job, to lead a small team and join a rewarding a fast paced R&D Environment, with opportunities to develop and progress. This opportunity offers very good benefits and are able to sponsor.
APPLY NOW or for more information on the Lead Electronics Engineer job please email Ben Wiles with your CV at bwiles@redlinegroup.Com or alternatively call 01582 878816 or 07471181784.....Read more...
My client, a world leader in the development of scientific instrumentation, are looking for a Business Development Manager in Southampton, to join their team.
The team has many years’ experience in, and is selling into both R&D, and OEM customers. They have a range of stock crystals & waveguides and can design custom chips for the demanding customer base.
The role will involve working primarily in a technology rich sales environment, focusing on selling their existing product lines, managing opportunities from enquiry through to close and some financial reporting.
This role would be ideal for a technically qualified individual looking to progress their career in Technical Sales.
Responsibilities for the Business Development Manager based in Southampton:
Proactively create opportunities for product sales
Respond to enquiries and work with customers to maximise our order intake
Support the HoS with campaigns focussed on new customer acquisition
Develop quotes, proposals and sales contracts consulting with the delivery team on operational matters
Skills & experience for the Business Development Manager based in Southampton :
Provable experience in a fast-moving sales environment
Relevant degree or equivalent e.G. Physics, Optics, Materials Science
Ability to work as an individual but can work as part of a team based in the UK
Ability to develop new long-term relationships with customers
APPLY NOW for the Business Development Manager based in Southampton, by sending your CV to ltemple@redlinegroup.Com or call on 01582 878820 / 07801 206 967. We always welcome the opportunity to discuss other Sales jobs.....Read more...
