Experienced Embedded Software Engineer required to join an existing programming and control team using Model Based Design methodology for battery solutions using C and C++.
Skills
Embedded software development experience in industry.
MATLAB and Simulink modelling and simulation.
Experience developing software test plans and implementing software unit testing and integrated Testing using MIL, SIL and HIL.
Masters or PhD in Electrical, Electronic or Software Engineering, ideally relating to automotive and stationary energy storage application.
C, C++, Python and scripting.
MCU???s, such as Infineon, TI, NXP or ST.
Lower layer modules or drivers.
Debugging tools and troubleshooting both software and hardware.
Github, Gitlab, Bitbucket or other version control.
AUTOSAR architecture and RTE,
Vector or ETAS AUTOSAR configuration tools
Algorithms implementation in AUTOSAR and Auto-Code generation
Automotive communication protocols ETH, CAN, Flexray.
CANape, CAN analyzer, Control Desk, ECU Diagnostics
Role
Low level software development, integration, verification, and debugging, including.
MCAL, MCU, CAN, SPI, LIN, ETH, I2C, PWM, etc.
Design and develop complex platform software for powertrain electronic control units.
Configurating DEM, DCM, NM, NvM, UDS modules for Diagnostics.
Developing complex driver, OTA, and other functions as needed.....Read more...
Catfoss Recruitment Ltd are currently in partnership with a globally respected R&D company that is looking to recruit am Instrumentation Engineer to their expanding team on a permanent basis.We are seeking to recruit an Instrumentation Engineer whose primary function will be to manufacture and install instrumentation for use within our R&D testing facilities. This will include but is not limited to; equipment calibration, the set-up of specialised measurement/monitoring equipment, model assembly and integration for test, troubleshooting and assisting in the operation of facilities.The successful candidate will be expected to demonstrate the drive and commitment necessary for ensuring that work is completed in line with challenging schedule requirements whilst maintaining a clean, safe working environment. To succeed in this position, you must be flexible in your approach to working hours, which will require shift working, and able to respond quickly to a changing workload.Instrumentation Engineer - Working hours: Mon – Fri, Full time, 40 hours per week, shift work required when testing facilities in operation (typical hours are 07.00 – 15:00 and 14.00 – 22:00 on a rotating weekly basis) office hours otherwiseInstrumentation Engineer - Main duties and responsibilities will include: -• Manufacture of bespoke wiring looms and assemblies with reference to circuit drawings / wiring lists.• Hand soldering of fine components at the work-bench and on test models.• Miniature strain-gauge installation and wiring.• Calibration, maintenance, testing and fault-finding of sensors, signal conditioning and data acquisition systems down to component level.• Specify required instrumentation from customer specification.• Support the design and integration of instrumentation into customer models and rigs.• Work as part of a team, involved in the preparation and assembly of models and rigs for testing to defined quality standards, giving consideration to schedule and costs;• Provide instrumentation support for projects in all of company test facilities.• Assist in the operation of company test facilities.• Maintenance of the instrumentation hardware and records.• Preparation and installation of specialist optical measurement systems in test facilities;• Making recommendations for design, process or hardware modifications to support continuous improvement within the department.• General departmental duties such as record maintenance, model storage, organization of equipment, rig maintenance,• Perform tasks with conformance to company Health & Safety Policy and Quality Standards.• Ability to work in confined spaces and at heights.• Flexible approach to shift working patterns & overtime as required.• Undertaking training, where necessary, in support of the above duties, to ensure that safe working practices are observedTraining will be given in all of the specialist activities associated with this position.Instrumentation Engineer - Qualifications & ExperienceThe successful candidate will be an experienced time served technician, preferably educated to HNC/HND Electrical and Electronic Engineering level (or equivalent) with experience of working in an R&D and/or commercial environment.This is an exciting permanent opportunity for the right person to be part of a successful and highly skilled engineering company. In return, we offer a range of benefits including: a competitive salary and pension scheme; free parking; employee assistance programme; optional sharesave scheme, private health insurance and 26 days’ annual leave plus Bank Holidays (increasing with length of service after 5 years’ service)Instrumentation Engineer previous suitable job titles: Instrumentation Technician, C&I Technician, EC&I Technician, Controls Technician etc…
Commutable from Bedford, St Neots, Milton Keynes, Northampton, Wellingborough, Biggleswade etc...The successful candidate must satisfy security clearance requirements – including the last 5 years continual UK residency.Please apply ASAP....Read more...
Holt Executive is Hiring Senior GNC Engineer (Space Missions) Holt Executive is partnering with a cutting-edge space technology company to find a Senior GNC Engineer to join their expert team. This is an exciting opportunity to work on advanced Guidance, Navigation, and Control (GNC) systems, contributing to the development of rendezvous, proximity operations, and docking (RPO) missions that are shaping the future of space sustainability.
About the Role: As a Senior GNC Engineer, you will be responsible for developing and validating trajectory planning, guidance algorithms, and navigation filters for complex spacecraft rendezvous and docking operations. You will work closely with flight dynamics, software, and systems engineering teams to create robust, fault-tolerant GNC solutions that ensure mission success.
This role is ideal for an engineer with a strong background in GNC algorithm development, aerospace simulations, and system-level analysis, looking to contribute to next-generation space missions.
Key Responsibilities:
- Design, implement, and validate GNC algorithms for RPO and spacecraft manoeuvres.
- Develop simulator models to support guidance and control system validation.
- Ensure configuration control and logical management of GNC software solutions.
- Support software architecture development, leading towards an integrated GNC software solution.
- Conduct research into state-of-the-art GNC algorithms and implement innovative solutions.
- Collaborate with QA and production teams to transition GNC developments into scalable solutions.
Essential Skills:
- Bachelors or Masters degree in Aerospace Engineering or a relevant discipline.
- Proficiency in MATLAB/Simulink, Python, and C/C++ for aerospace simulations.
- Strong experience in GNC algorithm design (e.g., navigation filters, guidance strategies, control systems).
- Experience in fault-tolerant GNC system design and software development.
- Understanding of systems engineering principles and best practices.
- Ability to work independently and as part of a multidisciplinary engineering team.
- Strong problem-solving skills, balancing innovation and on-time delivery.
Desirable Skills:
- Knowledge of GNC rendezvous sensors and pose estimation techniques.
- Hands-on experience with GNC hardware Assembly, Integration, and Verification (AIV).
- Familiarity with Active Debris Removal (ADR) and RPO mission concepts, such as ESA CleanSpace projects, DARPA Express, or DEOS.
Whats on Offer?
- Competitive salary and benefits package.
- Work with a highly skilled, international team on cutting-edge space technology.
- Hybrid working and flexible schedule options.
- Private healthcare, life insurance, and relocation support.
- Access to state-of-the-art office and cleanroom facilities.
- Regular social events and professional development opportunities.
If youre passionate about advancing space mission GNC systems, apply today or contact Holt Executive for more details!....Read more...
Senior DSP Engineer – Medical
I am currently hiring on behalf of a well-funded medical tech start up creating novel and life saving technology. We are working alongside each other to hire for a Senior DSP Engineer to joint their current team of 10. The suitable person will have expertise in electric fields, signal processing, and electromagnetic wave sensors. This role will not only offer you superb career progression opportunities but also lucrative share options.
The successful candidate for this Senior DSP Engineer based in London will:
Develop and implement signal processing algorithms for medical applications involving electric fields and electromagnetic wave sensors.
Design and optimise real-time signal processing techniques for catheter guidance and vascular imaging.
Work with firmware and embedded systems, implementing algorithms in real-world medical environments.
Analyse and process data from electromagnetic sensors, improving accuracy and system performance.
To be successful in this Senior DSP Engineer job based in London you will have:
PhD (or equivalent experience) in Signal Processing, Electromagnetic Sensors, Electric Fields, or a related field.
Strong expertise in electromagnetic wave propagation, electric field sensing, and applied physics.
Experience developing real-time signal processing algorithms for electronic or medical applications.
Background in hardware integration, particularly with sensor-based systems.
To apply for this role please send your CV to NDrain@redlinegroup.Com or call Nick on 01582 8878828 / 07487 756328 for more information.....Read more...
Holt Executive is Hiring Digital Electronics Engineer (C&DH) Holt Executive is partnering with a leading space technology company to find a Digital Electronics Engineer (Command & Data Handling) to join their team in Harwell, UK. This is an exciting opportunity to play a key role in the development of mission-critical spacecraft electronics, supporting innovative space missions that push technological boundaries.
About the Role: As a Digital Electronics Engineer (C&DH), you will be responsible for designing, developing, and testing electronic systems for spacecraft, covering the full lifecycle from early design to assembly, integration, and verification (AIV). The role involves working on complex spacecraft data handling architectures, interface design, and system testing, ensuring the smooth operation of mission-critical electronics.
This position offers the opportunity to shape the direction of C&DH engineering within a growing and dynamic team, contributing to space missions that require high-speed data processing, precision control, and fault-tolerant electronics.
Key Responsibilities:
- Develop and design Command & Data Handling (C&DH) subsystems for spacecraft.
- Define subsystem requirements, test plans, and verification processes.
- Manage data processing and power budgets for onboard electronics.
- Design and review C&DH architectures, ensuring compatibility with mission needs.
- Conduct FMECA (Failure Mode, Effects, and Criticality Analysis) and FDIR (Fault Detection, Isolation, and Recovery) processes.
- Collaborate with system engineers, ground segment teams, and operations teams to integrate and validate spacecraft systems.
- Plan, prepare, and execute electrical subsystem and system-level verification tests, including writing test scripts and supporting environmental testing.
- Work with suppliers and procurement teams to define specifications and evaluate C&DH equipment.
Essential Skills:
- Bachelors or Masters degree in Electrical Engineering or a related discipline.
- 2+ years of commercial experience in electronic and/or system design for satellite Command & Data Handling (C&DH) systems.
- Experience working with industry-standard spacecraft communication protocols such as CCSDS, I2C, RS422, SpaceWire, and CAN.
- Understanding of C&DH system operations, avionics interfaces, and mission electronics.
- Hands-on experience in developing and executing test plans for spacecraft avionics.
- Strong knowledge of systems engineering and requirements management throughout the project lifecycle.
Desirable Skills:
- Experience with FPGA design using Verilog/VHDL.
- Proficiency in Python for test scripting.
- Hands-on experience handling and testing flight hardware in a cleanroom environment.
- Knowledge of GNSS systems and time synchronization for satellites.
- Understanding of radiation tolerance analysis and space-grade electronics for Low Earth Orbit (LEO).
- Familiarity with space sustainability initiatives, such as active debris removal and in-orbit servicing.
Whats on Offer?
- Competitive salary and benefits package.
- Work with a highly skilled, international team on cutting-edge space electronics.
- Hybrid working and flexible schedule options.
- Private healthcare, life insurance, and relocation support.
- Access to state-of-the-art office and cleanroom facilities.
- Regular social events and professional development opportunities.
If you're passionate about digital electronics and spacecraft C&DH systems, apply today or contact Holt Executive to learn more!....Read more...
Are you looking for a Senior Embedded Software Engineer C/C++ role working for a global leading engineering business specialising in complex satellite communications systems?
If so, my client is currently recruiting for a Senior Embedded Software Engineer C/C++ to join their R&D site based in Chelmsford, Essex.
My client is looking for a Software Engineer to join their Team. They are seeking a key individual to join the existing software team engaged in the development of advanced electronics systems for the satellite modems markets. The purpose of this role is to design, develop and support software within the engineering department.
Main responsibilities for the Senior Embedded Engineer C/C++ job will be:
- Strong Embedded C and C++ programming for PowerPC or high-performance ARM processors.
- Experience programming hardware devices at register level.
- Developing low-level embedded software for Linux operating system, Linux kernel development & Linux network programming.
Requirements for the Senior Embedded Software Engineer C/C++ job include:
- The successful candidate will be an accomplished Software engineer with experience within a similar job.
- The ideal candidate will be a self-starter capable of successfully undertaking complex development tasks to a given schedule with minimal guidance and supervision
This is a fantastic opportunity to join a Chelmsford, Essex based world leader in their industry offering excellent career prospects, there is also hybrid working available along with a great benefits package.
You need to be able to pass Baseline security clearance, therefore sponsorship will not be provided.
To apply for the Senior Embedded Software Engineer C/C++ based in Chelmsford, Essex, please send your CV to Rwilcocks@redlinegroup.Com If you have any specific questions about this job, please contact Ricky on 01582 878810 or 079317 88834.....Read more...
Working under direction of senior designer engineer, tasks to include;
System layout, with 3D CAD tools
Detailing GA drawings for various applications
Detailing Project specific hardware
Building Bill of Materials (B.O.M.s)
Maintaining Building Information Model (B.I.M.)
Site Visits & Surveys
Liaising with internal departments
Involved in internal project meetings or reviews
Use of multiple CAD / other systems
AutoCAD
Solidworks
Tekla
Navisworks
RECAP
Training:Trainining will take place at Rugby College (part of Warwickshire College Group). You will attend Rugby College one day a week throughout the apprenticeship.Training Outcome:Working towards fully independent competent Design Engineer, leading design of own projects.Employer Description:• Our Organisation Grouping in product divisions to ensure high competency in every field.
• Specialisation of each of the six German plants in one subject ensuring efficiency and a continuous improvement in process.
• Uniform distribution/marketing organisations to guarantee that every customer can rely on one person in charge dealing with the whole project and who will identify himself with the demands of this customer.
• Uniform application of service methods with technical support where the product competency lies.
• By inter-linking overall team work keeping the competency on an up-to-date level (information- and communication technology, control technology, data management, service support methods, complete project planning and market control, innovation management, production methods).Working Hours :Monday– Friday: 08:30- 17:00 PMSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Team working,Creative,Initiative,Adaptable,Communicate at all levels,Confidence....Read more...
Senior Mechanical Engineer – Biotech Mechatronics – Cambridge
A spin-out Biotech company, based in Cambridge, is currently hiring several Senior Mechanical Engineers to join them and help accelerate the proof of concept, design, development, building, and testing of a novel life-saving biotech manufacturing device.
Your focus will be accelerating the proof of concept, design, development, building, and testing of the hardware of this new biotech device, collaborating with some excellent Medical Devices Physicists, Scientists, Electronics Engineers, and Design Engineers.
This role involves working on the design and development of this biotech manufacturing device, using 3D CAD. Therefore, specific CAD experience will be essential, ideally SOLIDWORKS.
We need senior-level candidates, someone who has worked on mechatronics, automation, robotics, precision devices or another complex electro-mechanical technology.
Due to the size of this company, you will be exposure to other areas of the business, including third-party meetings and attending Biotech, Medical Devices and Science conferences and trade shows. Consequently, it would be ideal if you have previously worked for a start-up/scale-up company or worked for a Medical Devices/Biotech/Scientific Design Consultancy and know what it’s like to wear multiple hats when needed. Experience in Medical Devices, Scientific or Biotech companies is not essential; we can also look at candidates from other complex sectors.
The technology you will be working on will save lives. I can provide more details once you have made an application. Most candidates I have spoken with find the work rewarding due to the impact this work will have on lives.
It is expected that you would hold a degree and a masters in a related Medical Devices, Mechanical Engineering, Design Engineering, Electronics Engineering, or another relevant scientific subject that led you into a Mechanical Engineer role.
You will also be rewarded with an excellent starting salary, enhanced pension, bonus, healthcare, other benefits, and future career development as the company grows while also working in an interesting field on a product that could help a lot of people.
As this is an exciting role, joining a start-up company at the beginning of their journey, I’m expecting a lot of interest in the role. So, if you are interested, please apply straight away or risk missing out to someone else.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you.....Read more...
Individuals within the Tekgem Apprentice Network Security Engineer role are part of a team that manage the operation of secure and highly available Operational Technology platforms, servers, and networks.
They support the installation, maintenance, and ongoing performance of the network components. This includes monitoring internal Tekgem and external client operating environments, networks, and related utilities and hardware, responding to incidents and problems as they arise, and taking part in project work.
They will support other engineers with projects to provide clients with network solutions based on specified requirements and anticipated growth. They will install new network hardware and maintain existing hardware where required.
Apprentice Network Security Engineers are enthusiastic to learn, they treat everyone around them with respect, they are open to changes in technology, changes in the way we do things and are always striving to improve. They support other members of the team, helping others when they need it and asking for support when they need it. They have good communication skills and must be able to work collaboratively with clients, vendors, and other technical colleagues.
Individuals have a strong customer service orientation to ensure that all projects, support requests and incidents are resolved in a professional manner.
Training:Why choose our Cyber Security Technologist Engineer Level 4 Apprenticeship?
The Cyber Security Engineer apprentice can help to design, build and test secure networks, security products or systems to help protect your organisation against cyber threats. QA is a market leader in cyber security training, with a state-of-the-art immersive cyber gamified learning, giving apprentices a hands-on learning experience in simulating a real cyber threat.
QA's exclusive partnership with Circadence Corporation, the pioneer of the hands-on gamified learning platform Project Ares®, allows us to uniquely incorporate hands-on scenario training into our cyber security apprenticeships. The Project Ares platform offers a totally immersive experience, using automated features to support skills adoption with an in-game advisor, Athena, who advises our players through scenario-based challenges. The platform scenarios replicate the unpredictability and escalating levels of complexity that cyberattacks can present. It drives high levels of engagement through leaderboards and badges, elements used widely in the gaming world.
QA’s Cyber Security Engineer Level 4 apprenticeship programme enables the apprentice to:
Develop problem-solving and critical thinking skills in a safe, but realistic environment.
Apply all of the acquired skills throughout the programme, with added scoring of players and opponent actions with replay for object assessment.
Take part in hands-on training and active-learning models that increase retention rates by 75% so that cyber apprentices can prepare for real-world challenges.
Tools and technologies learned: Apprentices will learn to use Project Ares, Python, Microsoft Azure, Microsoft PowerShell, Linux and AWS.
Apprentices without level 2 English and maths will need to achieve this level prior to taking the End-Point Assessment. Training Outcome:
90% of QA Apprentices secure full-time employment after finishing their apprenticeship.
Employer Description:Tekgem bridges the gap between Information Technology (IT) and Operational Technology (OT). Providing expert industrial cyber security services, our tried and tested consultancy & engineering helps our customers to manage their critical infrastructure safely and securely.Working Hours :Days and shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Team working....Read more...
Senior Electronics Engineer – Dorset or Beaconsfield (Hybrid) – Competitive Salary + Bonus + Ex. Benefits – Permanent We are seeking an experienced Senior Electronics Engineer to join our growing team. This role offers the opportunity to work on cutting-edge technology, supporting the full development lifecycle from design to testing. The ideal candidate will have a strong background in both analogue and digital electronics and experience in designing complex systems. This position requires sole UK nationals due to security clearance requirements.Benefits:
Competitive Pay & Bonus – Salary subject to negotiation plus 5% annual bonus.
Flexible & Hybrid Working – Two days onsite, flexible hours, TOIL, and 9-day working fortnight (optional).
Career Growth & Leadership Development – Access to training programmes, leadership development and mentorship opportunities with good progression opportunities.
Comprehensive Benefits – 25 days holiday (buy/sell option), private healthcare, life cover (4x salary), and retail discounts.
Key Responsibilities:
Requirement Analysis & Decomposition – Interpret system requirements and break them down into hardware specifications.
Electronics & Firmware Development – Design, develop, and review electronic circuits and firmware across full system, sub-system, and board-level designs.
Technical Oversight – Ensure the technical solution aligns with customer, legislative, and business requirements throughout the project lifecycle.
Project Leadership – Act as Project Engineering Lead or Work Package Manager, overseeing engineering activities and ensuring successful project execution.
Testing & Integration – Oversee initial test and integration, including formal testing to validate design performance.
Documentation & Compliance – Produce and approve technical documentation such as management plans, design documents, and test specifications while ensuring adherence to industry standards.
Mentoring & Team Support – Provide guidance and mentorship to junior engineers, supporting their development within the team.
Stakeholder Engagement – Liaise with customers, suppliers, and cross-disciplinary teams (mechanical, software, systems, and project management) to resolve issues and ensure smooth project progress.
Requirements:
Extensive Experience in Electronics/Firmware Engineering – Proven track record across the full project lifecycle, from design and development to testing and in-service support.
Background in Analogue and Digital Electronics Design – Hands-on experience with circuit design, schematic development, and PCB layout – with ECAD experience.
Project Delivery Experience – Ability to deliver reliable solutions on time and within budget, preferably in a fixed-price contract environment.
Multidisciplinary Team Collaboration – Comfortable working with Project Management, Systems, Mechanical, and Software Engineering teams to resolve issues and drive project success.
Relevant Technical Expertise – Knowledge of EMC, electrical safety, signal integrity, power electronics, RF, sonar, or high-speed digital design, along with experience in prototyping, testing, and verification.
Security Clearance Eligibility – Must be capable of obtaining SC clearance and be a sole UK national due to security requirements
How to apply: To apply for this excellent opportunity, please send your CV or contact Rob Hutchings at 02392 314679.....Read more...
Holt Executive are partnered with a leading design and manufacturing business with a cutting-edge product range that aids specific customer requirements, servicing a variety of markets across the globe including the Defence and Surveillance industries.
They require a Field Service Engineer to provide field support to customers worldwide ensuring the stable operation of hardware & software products. This will involve installing, configuring, maintaining, supporting, and optimizing all products and systems, which includes fire control systems, Naval electro-optical surveillance systems and land/vehicle surveillance systems.
Key Responsibilities for the Field Service Engineer:
- Offsite repairs to products and systems, and installation of new products at customer sites.
- After sales support and servicing to customers.
- Generating post site visit reports to include any recommendations and/or future actions.
- Strip-down / survey, repair, and test allocated customer repair returns.
- Testing and evaluating potential new equipment, sensors/cameras etc.
- Preparation of risk assessments and SSOWs for installation/commissioning activities.
- Lead (as required) in-house Factory Acceptance Testing (FATs) and other customer activities.
Key Skills & Experience for the Field Service Engineer:
- Experience of complex systems maintenance with electrical and mechanical assembly tools.
- Electronics knowledge, including microcontrollers, with an understanding of basic control theory.
- Competent mechanical and electro-mechanical skills and understanding.
- A strong understanding and proficiency with electrical, mechanical, PC architecture, and software skills including problem diagnosis, software loading and updates.
- Comfortable working in exposed or adverse conditions at land and sea, including working at heights and with large heavy equipment.
- Must be willing to travel worldwide at sometimes short notice, working extended hours as necessary (company compensation policy applies).
- Clean driving licence with class C1 is desirable for driving company test vehicle.
Company Benefits:
- 37.5 hour working week. Company Compensation Policy applies to overtime hours.
- Lunchtime finishes on a Friday.
- 28 days annual leave plus bank holidays.
- Christmas closure.
- Group pension plan matched contributions up to 5%.
- Income protection scheme and Employee Assistance Programme.
- Employee Help@Hand service gives you and your family access to 4 key services including remote GP service, second opinion, mental health pathway service and physiotherapy consultations.
- Life assurance policy, including bereavement counselling and probate helpline.
- Company shares incentive plan and save-as-you-earn scheme.
- Group electric vehicle salary sacrifice scheme.
Security Clearance Requirements:
Due to the nature of the business, applicants need to be able to obtain UK Security Clearance as a mandated requirement. Therefore, if successful, you will need to provide proof of identity, employment history and right to work in the UK, along with proof of UK residency for at least five years.
If your skills and experience match this Field Service Engineer opportunity, we encourage you to apply now!....Read more...
JOB DESCRIPTION
DAP is looking for Engineering Design Intern for Summer 2025 based out of Fenton, MO.
Job Responsibilities
The summer intern would work under mentorship of Senior Design Engineer. Participate in assembly, testing, and evaluation of engineering prototypes. Conduct upfront engineering system research for new to market products. Utilize SolidWorks CAD program to generate and update engineering documentation.
Requirements
Major: Mechanical Engineering College classification: Sophomore or Junior. Able to use Excel, Word and MS Project to complete assigned tasks. A working familiarity with SolidWorks is preferrable. Candidate should have excellent communication skills since they will be interfacing with team members in Baltimore and in Fenton.
Pay
$17 / hour
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products. DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores. DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers. Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online!....Read more...
You will have the opportunity to work alongside highly experienced colleagues on IT projects as well as be given encouragement to explore the areas of IT which interest them the most within a supportive environment.
Your tasks will include:
Provide the first port of call for issues raised by users concerning IT hardware and connectivity – working with other team members as necessary to diagnose and resolve faults
Create end user accounts in line with company policies and procedures
Document all resolutions within helpdesk
Document any revised or new procedures working with other team members
Communicate all resolutions promptly and effectively and always providing a high level of customer service
Assist the Security & Infrastructure lead in projects and new system setups
Setting up new hardware e.g. Laptops and Desktop computers
Training:
This training programme is completed via an Apprenticeship Standard at level 3 and learners will achieve a Pearson Level 3 Information Communications Technician qualification
Apprentices without Level 2 English and mathematics will need to achieve this level prior to taking the End Point Assessment
Regular training contact will support the learner to develop the occupation standard’s knowledge, skills and behaviours. The learner will build a portfolio of evidence-based on real work projects
The Apprenticeship Standard has three pathways to choose from:
Support Technician
Network Technician
Digital Communications Technician
Training Outcome:This will provide a solid foundation into IT Support as a career and can lead to promotion to IT support technician from which the successful candidate can narrow their skills into various trajectories including Network Engineering, Security Specialist, Cloud Computing Engineer.Employer Description:Amphenol LTD is a manufacturing site within the family of companies that forms the Amphenol Corporation, a global interconnect specialist generating in excess of $8 billion yearly revenue with over 74,000 employees.
Employing around 260 people at the site in Whitstable, Kent, Amphenol LTD offers a full design and manufacturing service for a large range of connectors and interconnect solutions, including cable assembly, over-moulding and electronic packaging. In the age of globalisation, Amphenol LTD is proud to have retained full end-to-end manufacturing capability for its products in the UK, whilst having opened access to low cost manufacturing sites around the world to complement its offering to customers globally.Working Hours :Monday - Thursday, 8.00am - 4.30pm and Friday, 8.00am - 1.30pm.Skills: Communication skills,Attention to detail,Customer care skills,Team working,Initiative,Willing to learn,Reliable....Read more...
JOB DESCRIPTION
The Process Engineer provides process engineering support for raw materials, compounding, production and packaging functions to improve safety, quality, service and cost efficiencies in the operations area in the Pacific, MO manufacturing plant.
Responsibilities
Support daily production needs through process troubleshooting, experimentation and support for production requirements. Lead continuous improvement projects to reduce cost, increase material utilization, improve first time right, integrate new products/processes into production and reduce variation. Implement necessary changes and update all documentation (including drawings and SOP's) accordingly. Coordinates with plant engineer to oversee capital projects necessary for the continued improvement and modernization of the plant. Ensure completion of projects within budgets. Responsible for achieving and maintaining safety goals relative to the maintenance and engineering functions. Responsible for safety devices, safe design, etc. of all equipment. Administer process hazard analyses (PHA's) for identified materials, processes, and RHP Compliance. Create and maintain P&IDs for current and future processes. Support the implementation of statistical process control by implementation of data collection systems Support the site's environmental program by assisting with reporting, compliance monitoring, and QA results in support of process engineering improvements. Troubleshooting machinery, including PLC coding adjustments.
Qualifications
Bachelors' Degree in Mechanical, Electrical, or Industrial engineering. 3 years' experience in manufacturing environment. Six Sigma/lean manufacturing experience. Safety and ergonomic experience. Understanding of process control methods, flowmeters, level monitors, and other process controls within a batch manufacturing process. Mechanically inclined with a hands-on approach Previous Capital Project experience Ability to read and interpret process drawings Strong interpersonal skills: good communication skills both written and verbal. Strong Analytical & Troubleshooting skills. PC usage with MS Office Suite Strong AutoCAD skillset. (3D design utilizing Inventor Professional or Solidworks is plus) Experience with PLC's is desired, Allen Bradley experience, a plus.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products. DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores. DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers. Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online!....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. The Engineering, Facilities and Maintenance Manager is responsible for directing all engineering activities and maintaining and upgrading the Site's facilities and production equipment. In addition, this position is responsible for maintaining/advancing a viable and visual Preventative Maintenance Program at the facility, while identifying capital requirements for the annual capital plan. Responsibilities also include developing and assisting in value stream design and implementation of lean principles and tools within the manufacturing environment. This includes, but is not limited to, assisting with value stream mapping, employee training, continuous improvement event facilitation, waste identification and elimination, problem solving (through the scientific method), work area and station design and layout, visual control implementation, material flow, and progress tracking and communication. Lastly, this resource acts as a passionate advocate for a cultural change toward lean thinking throughout the organization.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Partner with LEAN leadership in eliminating unplanned production interruptions. Use DAKOTA as the compliance tool to report incidents, near misses and non-conformances, and to maintain compliance with EH&S. Work with the maintenance crew to implement the needed preventative measures. Recommend design modifications to eliminate machine or system malfunctions. Prepare capital projects for submission to management. Included are costs, schedule, Job Hazard Analysis (JHA), Process Hazard Analysis (PHA), and needed procedures. Serve as lead project engineer for approved capital projects with the goal of on time and on budget completion. Develop and administer a viable and visual Preventative Maintenance Program that reduces downtime and improves overall reliability of production and production supporting machinery. Responsible for identifying capital requirements for the facility's annual capital plan and budget. Direct, review, and approve product design and changes consistent with MOC procedures. Recruit departmental employees; assign, direct, and evaluate their work; and oversee the development and maintenance of staff competence. Analyze annual site utility expenditure and develop plan to optimize plant efficiency to reduce costs (ISO 14001). Perform administrative functions such as reviewing and writing reports, approving expenditures, enforcing rules, and making decisions about the purchase of materials or services. Integrate the plant PHA initiative with the appropriate capital projects. Investigate equipment failures and difficulties to diagnose faulty operations and work with the maintenance crew to implement the needed preventative measures. Interface with leadership, operators, and maintenance to develop needed TPM programs. Support SPC, DOE's, and other Quality initiatives. Lead Engineer for the production processes. Develop facility infrastructure upgrade plan.
EDUCATION REQUIREMENT:
B.S. in Mechanical, Chemical or Electrical Engineering.
EXPERIENCE REQUIREMENT:
At least 1-2 years in a supervisory role. 5-10 years of Facility and Process Engineering experience. Experience managing capital projects required. Experience is Engineering Management. PHA and "Process Safety Management" experience a positive.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming. Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions. Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense. Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, balance, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $99,222 and $124,027. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
