A Senior Hardware Design Engineer is sought to join an innovative engineering team in Essex, responsible or leading projects designing, developing, and testing hardware solutions that contribute to our range of high-performance products.
The Senior Hardware Design Engineer, Essex, will lead technical excellence in the field, guiding design and validation practices and mentoring junior engineers, collaborating with senior engineers across hardware, software, mechanical and test domains. You’ll draw on deep engineering expertise, production methodologies, and supplier processes to ensure robust, high-performance product development. Responsibilities include:
Work with Product Management to define product and design specifications.
Lead in the design and development of digital, analogue, and RF hardware products, providing support to junior engineers.
Create detailed schematics and PCB layouts using Altium Designer.
Perform component selection, simulation, and analysis to ensure optimal performance.
Develop and execute test plans for prototypes and final products.
Conduct debugging and validation using test equipment such as oscilloscopes, logic analysers, and spectrum analysers.
Collaborate with mechanical, software, test, and manufacturing teams to ensure efficient hardware/software integration and delivery.
The Senior Hardware Design Engineer, Essex, will have the following key skills:
Bachelor’s or Master’s degree in Electronic Engineering, or equivalent industry experience.
Proven experience in hardware design and development with proficiency in Altium Designer.
Expertise in high-speed signal design, RF, power management, and EMI/EMC considerations.
Strong debugging skills with hands-on experience using lab equipment.
Knowledge of FPGA design (VHDL/Verilog) or microcontroller-based systems, with an understanding of embedded software development.
APPLY NOW – Senior Hardware Design Engineer job in Essex could be of interest, send your CV to adighton@redlinegroup.Com or call Adam on 01582878821/ 07961158768.....Read more...
A Graduate Hardware Design Engineer is sought to join an innovative engineering team in Clacton, Essex, contributing to the design, development, and validation of high-performance electronic hardware solutions across the full product lifecycle.
The Graduate Hardware Design Engineer, Clacton, Essex, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices. This may include product specification definition, schematic capture and PCB layout, prototype validation, hardware debugging, cross-functional collaboration, and lifecycle support activities within a hardware design environment.
Responsibilities include:
Work with Product Management to define product and design specifications.
Lead the design and validation of product update projects under guidance from senior engineers.
Create detailed schematics and PCB layouts using Altium Designer.
Develop and execute test plans for prototypes and final production hardware.
Debug hardware using laboratory test equipment such as oscilloscopes and digital multimeters.
Collaborate with mechanical and software teams to ensure effective hardware/software integration.
Work cross-functionally with software, mechanical, test, NPI and manufacturing teams to ensure efficient project delivery.
Create and maintain comprehensive technical documentation and support wider product documentation activities.
Support products throughout the full lifecycle, from concept through to end of life.
Provide technical support to Production, Sales teams, and customers where required.
Participate in training courses, seminars, trade shows, and quality system audits to support continued professional development.
Key skills & experience:
Degree in Electronic Engineering or equivalent industry experience.
Experience with schematic capture and PCB layout tools.
Hands-on experience using laboratory test equipment such as oscilloscopes and multimeters.
Experience working within multi-disciplinary teams.
Strong communication, problem-solving, and technical skills.
How to apply:
Apply now for the Graduate Hardware Design Engineer role in Clacton, Essex. Send your CV to adighton@redlinegroup.Com or Call Adam on 01582878821.....Read more...
Senior Hardware Design Engineer required to join a team creating cutting edge hardware products.
Experience
VHDL or Verilog for FPGA experience is essential implementation of algorithms, high speed digital design and experience in developing products for manufacture.
Degree level in Electronic Engineering or equivalent.
Image sensors, optics, Ethernet, and RF Design would be advantageous.
Responsibilities
Design a range of electronic hardware products including high speed motion capture and video cameras, calibration devices, and networking synchronization.
Ensure design test coverage for development and manufacture against appropriate regulatory compliance.....Read more...
An exciting opportunity has arisen for an experienced Hardware Development Engineer to join a fast-paced, multi-disciplinary team designing and delivering secure digital hardware solutions. This is a hands-on role covering the full development lifecycle, from concept and design through to testing, production support, and customer integration.
What Youll Do
- Take ownership of hardware design and delivery across the entire product lifecycle.
- Specify and design high-speed digital boards for products and test equipment.
- Create, build, and test development and production test equipment.
- Capture schematics and support PCB layout activities.
- Collaborate closely with Mechanical, Software, and Systems engineers to ensure seamless integration.
- Perform hardware design verification and support system/software testing.
- Produce development and production test processes and documentation.
- Provide production support, including resolving test and manufacturing issues and training production staff.
- Address design changes, component obsolescence, and integration of secure data products into customer platforms.
What Were Looking For
- Degree in Electronic Engineering or a related discipline.
- Full hardware development lifecycle experience with a strong grasp of electronic design fundamentals.
- Proven track record in high-speed digital circuit development and signal integrity.
- Skilled in hardware testing and troubleshooting using oscilloscopes, logic analysers, and similar tools.
- Proficiency with industry-standard CAD tools (e.g., Cadence or Mentor schematic/layout).
- Must be a UK national and able to obtain UK Security Clearance (SC).
Desirable Skills
- Experience supporting production and applying Design for Test (DFT) and Design for Manufacture (DFM) techniques.
- Embedded firmware design (C/C++/Assembler/Python).
- Software design for test and test-equipment development.
- Ability to write test specifications and conduct hardware/system testing.
This is a fantastic opportunity to work on innovative, secure hardware technologies, contributing to projects with real-world impact while developing your expertise in a collaborative and forward-thinking engineering environment.
TT....Read more...
We are partnered with a growing business building specialist electronics systems used in demanding industrial and scientific applications. They are looking for a FPGA Design Engineer to build products that are high performance, reliable, and built to solve real-world challenges for global customers.
In this FPGA Design Engineer role, you will:
Develop FPGA solutions for high-speed imaging and data capture
Own FPGA tasks across new product designs, from initial concept to verification and support
Work closely with hardware, software, and systems engineers to deliver production-ready designs
Input into system architecture, specs, and ongoing improvements across the product range
The ideal FPGA Design Engineer will have:
Experience designing FPGAs
Hands-on background in high-speed digital or data-heavy systems
Strong electronics or engineering foundation with a practical mindset
Interest in imaging, embedded systems, or technically demanding hardware
The role comes with a competitive salary, benefits, bonus potential, opportunity for flexible working, and plenty of scope to make a real impact.
To apply for this FPGA Design Engineer role, click apply, send your CV to efrost@redlinegroup.Com or call Ed on 01582 878819.....Read more...
A fantastic opportunity has opened for an experienced FPGA Engineer to join a fast-paced, multi-disciplinary engineering team working on innovative cyber and information assurance technologies. Youll contribute to the design, development, and testing of secure digital solutions used across critical communication and defence environments.
This role offers the chance to work on complex FPGA designs, combining industry-standard and custom interfaces, and to be involved across the full engineering lifecycle, from requirements and architecture through to implementation, verification, and production.
Applicants must have, or be eligible to obtain, UK SC clearance.
What Youll Be Doing As An FPGA Engineer
- Own the FPGA solution from requirements through to development and production
- Lead requirements elicitation and translate them into FPGA implementations
- Define FPGA architecture in collaboration with the wider development team
- Work with the Project Manager to plan, track and deliver against agreed schedules
- Potentially coordinate other FPGA engineers on specific design activities
- Interface with FPGA vendors and third-party IP suppliers
- Develop test benches and perform system-level testing
- Support proposal preparation, estimation activities, and contribute to technical white papers
What Experience Will You Need As An FPGA Engineer
- Proven experience delivering FPGA designs through the full development lifecycle
- Strong VHDL design and verification skills
- Experience optimising designs for performance and power consumption
- Hands-on experience integrating and debugging FPGA solutions in hardware
- Familiarity with configuration management systems
- Experience with Microchip devices and Libero (advantageous)
- Verification experience using ModelSim/QuestaSim (UVM beneficial)
Desirable Experience For The FPGA Engineer
- Requirements management using DOORs
- SmartFusion, IGLOO or PolarFire devices
- PCIe NVMe and FPGA-based implementations
- Xilinx or Altera device/toolchain experience
- Working with third-party IP cores
- Design for security principles
- Embedded firmware (C/C++/assembler)
- Understanding of cryptographic standards and algorithms
- Integration of FPGAs into wider hardware platforms
Why Join
Youll be working with a highly skilled team solving challenging, meaningful engineering problems with real-world impact. Expect a collaborative culture, complex technical work, and the opportunity to grow your expertise across FPGA, embedded systems and secure digital design.
TT....Read more...
Are you looking for the best FPGA Design Engineer jobs???? Want to work for an industry leader????
A challenging opportunity for a FPGA Design Engineer - VHDL based in Berkshire has become available with a leader in state-of-the-art electronics. My client is a worldwide provider of innovative electronics for a range of industries predominantly in the image/video markets.
As a FPGA Design Engineer - VHDL you will be involved in the innovative design and development of new FPGA and digital electronic components.
You will be involved in full life-cycle design including specification, design, implementation, simulation and hardware testing.
A FPGA Design Engineer - VHDL will have:
- Degree educated in electronic engineering or a similar discipline.
- You will have a good understanding of designing with FPGAs – ideally Xilinx
- VHDL Experience
This is a fantastic opportunity to have a huge impact on a vastly growing company within the Berkshire area.
If this job opportunity as a FPGA Design Engineer based in Berkshire, could be of interest, send your CV to KGraveney@redlinegroup.Com....Read more...
A Graduate Component Engineer is sought to join an innovative engineering team in Clacton, Essex, contributing to the selection, qualification, and lifecycle management of electronic components used across hardware designs.
The Graduate Component Engineer, Clacton, Essex, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices. This may include component selection processes, BOM management, lifecycle monitoring, compliance standards, and exposure to hardware design and testing activities used in production and supplier environments.
Responsibilities include:
Work with hardware design, manufacturing, quality and procurement teams to define component specifications and selection criteria.
Create and maintain component libraries, supporting schematic capture and PCB layout activities.
Develop and execute component evaluations, including parametric comparisons, second-source identification, and suitability assessments.
Debug and validate electronic component performance through testing and evaluation activities to ensure compliance with design requirements.
Collaborate with procurement and suppliers to gather technical data, availability information and lifecycle status updates.
Maintain comprehensive technical documentation, including BOM generation, BOM risk assessments and lifecycle tracking (NRND, LTB, EOL).
Support production and engineering teams with component-related technical queries and assist with quality system audits.
Key skills & experience:
Degree in Electronic Engineering or a closely related discipline, or equivalent industry experience.
Proficiency with schematic capture and PCB layout tools.
Practical experience working with BOMs, component datasheets and spreadsheets.
Strong problem-solving and analytical skills.
Effective communication and teamwork abilities, with excellent attention to detail.
How to apply:
Apply now for the Graduate Component Engineer role in Clacton, Essex. Send your CV to adighton@redlinegroup.Com or call Adam on 01582878821.....Read more...
Senior Electronics Hardware Engineer – Medical Devices – Raleigh, North Carolina
A rapidly growing medical device innovator is seeking an experienced Senior Electronics Hardware Engineer to help drive the development of a genuinely industry‑disrupting technology. Based on‑site in Raleigh, North Carolina, you will play a central role in advancing next‑generation medical devices that improve patient lives.
In this position, you will work closely with physicists, mechanical engineers, scientists, and other specialists to design, refine, and optimise complex medical technologies. You will be contributing to both the development of new devices and the enhancement of existing systems.
You should have a proven background in the design and development of medical devices and a strong understanding of ISO 13485, IEC 62304, and EN 60601 standards. Experience working on electronics‑centric medical technologies is essential. Exposure to wearable medical devices or systems that interface with smart devices would be advantageous.
A degree in electronics, physics, or a related discipline that has enabled you to specialise in electronics hardware design for medical devices is expected.
This is a rare opportunity to focus on a single, high‑impact medical device with genuine disruptive potential. Interest is likely to be high, so early applications are encouraged. Please note that this role is fully on‑site, five days per week, and hybrid or remote working is not available.
To explore this opportunity further, contact Andrew Welsh, Director of Medical Devices, Biotech and DeepTech Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your CV and a member of our team will be in touch to discuss next steps.....Read more...
Embedded Hardware Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: FPGA/VHDL, Java or C/C++Nice to have's: Python, Siemens PLC, Maven/Ant, SQL Server, Linux, Docker, GIT, Jenkins, Sonatype Nexus
Our Client:Is a pioneering, family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek a highly skilled Embedded Hardware Developer with a background in Electronic Engineering and experience in FPGA/VHDL to join our client's team. As an Embedded Hardware Developer, you will design, develop, and maintain simulated signal-processing systems, combining C++, Java or Python with FPGA/VHDL.
Your Tasks:
Development and simulation of complex signal processing systems
Design and verification of simulated signal processing system with hardware (mainly FPGA/ VHDL)
Design and development of PCB for control systems
Maintenance and further development of the internal firmware environment and hardware
Commissioning and tests of control systems
Required Skills:
Master’s or Bachelor’s degree in electrical science or similar education
Experience in signal processing, FPGA designs and VHDL programming
Experience in PCB development for control systems
Knowledge of component-oriented design with JAVA OSGI/RCP, with SPS programming (Siemens) and with Python as a plus
Alternatively, strong C++ skills are welcome
Good language skills in English and German (both spoken and written)
Positive work attitude. Collaborative team player with excellent communication skills to support team members
Ability to work in interdisciplinary teams
Benefits:
CHF 100 -130k + Bonus Benefits
Opportunity to work on exciting projects
Collaborative and dynamic international team environment
Remote work options with flexible working hours
Professional development opportunities and mentorship
Comprehensive benefits package, including health insurance, retirement plan, and more
Access to cutting-edge technologies and tools
Recognition and rewards for outstanding performance
30 Days Annual Leave
Location: Aargau, Baden, Switzerland (Remote)Salary: CHF 100 -130k + Bonus Benefits
Mandatory Skillset: FPGA/VHDL, Java or C/C++Nice to have's: Python, Siemens PLC, Maven/Ant, SQL Server, Linux, Docker, GIT, Jenkins, Sonatype Nexus
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/ARG100130....Read more...
Are you looking to work with a market leader?
Due to expansion this well-established Electronics Design Consultancy are now looking to hire an Electronics Design Engineer. They are a global industry leader who provide solutions to many different customers all over the world. This role will give you a huge amount of exposure to electronics design from prototype stage to full-life cycle development. You will be joining a team of ten and will be offered to work on a hybrid basis with an option to work from home two days a week.
Key skills and experience for the Electronics Design Engineer, based in Nottinghamshire:
Proven experience within an electronics design role – Analogue and digital design experience.
Develop and manage complex electronic hardware designs, including schematic capture and multi-layer PCB layout (typically 2–8 layers, mixed-signal).
Degree qualified in a related Electronics discipline
Circuit and PCB design
C Software programming
Excellent verbal and written communication skills
This is a great chance for an Electronics Design Engineer to join a successful and stable business with the opportunity to progress their career long term. This organisation are not able to support Visa sponsorship.
To apply for the Electronics Design Engineer job or if you have any questions, please contact Ricky Wilcocks on 01582 878810 or email a copy of your CV to rwilcocks@redlinegroup.Com otherwise we welcome the opportunity to discuss other engineering jobs.....Read more...
Power Electronics Engineer — Medium Power (100 W–10 kW)
Clevedon, Somerset
Our client is seeking an experienced Power Electronics Engineer to join their engineering team, contributing to the design and development of advanced medium-power electronic systems.
This role offers hands-on involvement across the full product lifecycle, working on power conversion, control electronics, and embedded systems typically in the 100 W–10 kW range.
You will work closely with multidisciplinary teams to deliver robust, production-ready designs for modern electrical and industrial applications.
Key Responsibilities:
Design and develop medium-power electronics (100 W–10 kW) including:
Power conversion stages
Analog and digital control circuitry
Signal conditioning and feedback systems
Produce high-quality schematic designs, component selection, and multi-layer PCB layouts.
Perform simulation, prototyping, debugging, and verification testing.
Support new product introduction from concept through production.
Collaborate with test, manufacturing, and service teams to ensure reliable and manufacturable designs.
Contribute to continuous improvement of design processes and product performance.
Ensure compliance with ISO9001, ISO14001, EMC requirements, and relevant safety standards.
Qualifications & Experience
Degree in Power Electronics, Electronics Engineering, Embedded Systems, or equivalent.
Strong background in hardware and power electronics design, including: Analog and digital circuit design, Power supply and converter design, High-quality PCB layout (OrCad preferred)
You can be experienced from 1 year all the way through to Senior level.
This position offers a rare balance between hands-on power electronics design, analog engineering, and real-world medium-power systems, making it ideal for engineers who enjoy working across both control electronics and power hardware.
Please send your CV to ndrain@redlinegroup.Com Or call 01582878828 to speak with Nick Drain for more information.....Read more...
Motor Drives Engineer required to work on algorithms and systems for direct drive permanent magnet electric motors.
Control algorithm experience distributing torque and optimising energy efficiency would be ideal.
Requirements
Electric Vehicle development experience CAN Bus communications, electrical powertrains and control experience.
MATLAB and Simulink
Harness design process knowledge
Degree in software development, electronics, motor control or automotive engineering.
Responsibilities
Design, verification and validation of electric vehicle controls systems.
Development of torque vectoring traction control and ABS.
Brake by wire research and modelling.
Electrical power system architecture
Software development in Simulink, hardware in the loop, HIL, dyno and firmware across the vehicle.....Read more...
Senior RF Engineer required to join a Security Cleared team Designing linear high power wide band RF amplifiers up to 200 Watts using GaN or LDMOS electronic circuits and sub assemblies for military and airborne use.
You work as part of a small dynamic RF and Hardware team and contribute across the full product lifecycle from requirements, design, test, release and support of RF designs.
Requirements
Transmitter and Receiver circuit design for military or airborne systems, MIL-STDs or DO160.
GaN or LDMOS high power wide band RF amplifiers up to 200 Watts.
RF filter design.
Antenna design with LNA, Down converter and Upconverters
PCB Design Software and RF simulation tools.
Altium, Cadence AWR Microwave Office, Ansys HFSS.
Bachelors, Masters or PhD degree in related subject
British Citizen or ability to obtain required security clearance (SC).
Responsibilities
RF Design, System Architecture, RF Simulation, Schematic capture, PCB Layout and Footprint.
Design Reviews as logical.
Design verification against specifications.....Read more...
An exciting opportunity has arisen for an Electronics Engineer based in Worcestershire, to join a bespoke electronic design and manufacturing services company. This is a key position offering variety, technical challenge, and long-term career progression in a growing company.
The ideal Engineer should have a good knowledge of circuit design, both analogue and digital, at a schematic and board level, as well as a good working knowledge of C. Ideally, you would also be at home using 3D packages to design injection moulded plastic or folded metal enclosures.
Ideal skills/experience of the Electronics Engineer based in Worcestershire
Good knowledge of C programming language
Knowledge of embedded systems and their benefits and limitations
Knowledge of both digital and analogue electronics
Experience laying out circuit boards
Experience with Microchip devices and their IDE (MPLAB X)
Experience with Eagle
Experience with Fusion 360
Experience with CAN and other similar communications protocols
Exposure to prototyping hardware such as 3d printers and laser cutters
The successful candidate must be an adaptable, enthusiastic individual with extensive experience working for a similar kind of electronics company; however, those with some experience that show the right aptitude and interest will also be considered.
To apply for this Electronics Engineer based in Worcestershire role, please send your CV to:
Adighton@redlinegroup.Com or call 01582878821 or 07961158768....Read more...
My client, a globally recognised audio manufacturer based in Glasgow, is seeking a highly skilled Electronics Design Engineer with strong analogue expertise. This is an exceptional opportunity to work on cutting-edge, low-noise electronics for some of the best music systems in the world.
This position is ideal for an engineer who thrives in both analogue and digital domains. You will design, test, and refine complex mixed-signal circuitry used in premium audio systems where noise performance, signal integrity, and precision are critical.
You’ll work on-site within a technically exceptional R&D team dedicated to pushing the boundaries of high-end audio design.
Based in Glasgow, this company is internationally renowned for producing some of the highest-performing audio systems in existence. Their engineering is rooted in deep analogue expertise, innovative mixed-signal design, and meticulous craftsmanship. This is a rare chance to contribute to world-class products with a company that values long-term employee development.
Essential Requirements (must haves) for the Electronics Design Engineer:
Excellent understanding of analogue circuit principles (op-amps, filters, noise optimisation, precision signal paths). This will be technically tested.
Practical experience in FPGA design using VHDL or Verilog.
Ties to Glasgow or Scotland – they seek engineers committed to a long-term future with the company.
Already eligible to work in the UK – no visa sponsorship or overseas relocation.
On-site role – all-remote working is not available.
Genuine enthusiasm for audio electronics and precision design (not just being a musician).
Key Responsibilities for the Electronics Design Engineer:
Design, simulate, and test mixed-signal circuits for high-end audio devices
Develop analogue front-ends with extremely low noise and distortion
Work on data conversion stages, DSP pathways, and FPGA-based control
Generate schematics, work closely on PCB layout optimisation, and validate prototypes
Collaborate with hardware, software, and acoustic engineering teams
Ensure designs meet the company’s world-class audio performance standards
Interested? Apply Today!
If you’re a Electronics Design Engineer with strong analogue knowledge, send your updated CV to Nicola at Nking@redlinegroup.Com Or contact Nicola directly on 01582 878839/ 07961 158788.
Take the next step in your career and help shape the future of world-class audio engineering.....Read more...
A great opportunity for a Mechanical Design Engineer to join a growing engineering team working on advanced flight simulator hardware. Youll be contributing to the design and development of high-fidelity training systems used by pilot training organisations worldwide.
In this role, youll be involved in developing mechanical and electromechanical systems, producing detailed models and drawings, supporting testing and validation, and working closely with cross-functional teams to deliver high-quality, safety-critical hardware. This is a fast-paced environment where ownership, agility, and collaboration are key.
What youll be doing
- Designing mechanical and electromechanical hardware for next-generation flight simulators
- Producing detailed 3D models, drawings, and specifications using industry-standard CAD tools
- Working with systems, software, and project teams to deliver integrated solutions
- Ensuring compliance with aerospace standards and supporting testing/validation
- Contributing to continuous improvement and evaluating new tools and technologies
- Supporting supplier management and component integration
- Providing technical leadership or mentoring depending on seniority
What were looking for
- Degree in Mechanical Engineering (or related field)
- Experience in mechanical/electromechanical hardware development
- Strong CAD skills (experience with Creo/Pro-E or CATIA V5 is a big plus)
- Experience with structural analysis/FEA tools (NASTRAN, Ansys, Abaqus welcomed)
- Familiarity with PLM systems (Windchill, Teamcenter)
- Understanding of aerospace mechanical/electrical standards
- Strong problem-solving skills and experience with testing/validation
- Comfortable working in multi-disciplinary teams
- Experience in flight simulation, aerospace, automotive, wind energy, or similar industries is an advantage
Benefits
- Pension matched up to 7%
- 25 days annual leave + bank holidays (increasing with service)
- Private Medical Insurance
- Life Assurance (4x salary)
- Group Income Protection
- Employee Assistance Programme (24/7 support)
- Digital GP access
- Holiday buy/sell scheme (up to 5 days)
- Retail, travel & leisure discounts
- Onsite parking with EV charging
If youre looking to work on meaningful, technically challenging projects within a collaborative engineering environment, this could be a great next step.
TT....Read more...
A highly skilled Principal Electronics Engineer Job has come up to join my client who is a global leader in developing embedded computing, based in Northamptonshire.
With a high investment in research and development, several on-going projects and substantial growth, my client are looking to recruit a Principal Electronics Engineer to join their R&D department.
This Principal Electronics Engineer Job will be responsible for technical and project leadership and the leading of a cross-functional team of engineers working on the development of high-performance Graphic Cards, Sensor Processing products and Network Switches. The successful applicant with be happy to embrace a culture of outstanding team work as well as the ability to work under own direction.
This Principal Electronics Engineer Job will have extensive skills in Hardware development and be a good influencer and communicator. Self-motivation and good organisation are essential.
Ideal candidates for the Principal Electronics Engineer job based in Northamptonshire will have design and development experience in the following areas:
Designing high speed digital circuits that utilise the latest FPGA, Microprocessor and high-speed interconnect technologies.
Schematic Capture using Altium.
Integrating in-house designs with COTS modules (power supplies, single board computers, RF interfaces).
The successful candidate for this Principal Electronics Engineer job will have:
A degree educated in Electronic Engineering or similar subjects with provable practical design experience, ideally in an aerospace or defence company
Working knowledge of serial interfaces i.E. RS485, RS422, MLVDS.
Mixed signal knowledge using ADC/DAC, FPGA, SoC based design for high performance signal processing, communications and control.
This is a fantastic opportunity to join a well-established, highly profitable company investing heavily in R&D.
If you would like further information on the Principal Electronics Engineer Job opportunity, based in Northamptonshire, please send an up to date CV to rwilcocks@RedlineGroup.Com or call Ricky Wilcocks on 01582 878810.....Read more...
RF Design Engineer required, ideally Senior level to work on defence, military and avionics communications for long range real time video new product design and development. You will join a successful RF and Hardware Design team and work across the full product lifecycle from requirements through design, test, release and support of RF systems.
Requirements
British citizen eligible for security clearance
Radio Frequency System Architecture
RF Simulation
Altium Electronics Schematic capture, PCB Layout and Footprint or symbol Creation
Real time long range data link knowledge
High resolution video transfer understanding.
RF inhibitor exposure.
Bachelors or Masters degree in Engineering or related subject.
Role
RF Design for New Product Introduction or NPI and the evolution of existing world class RF systems for defence and aviation.
RF System Architecture exploiting the latest RF components and technologies.
RF Simulation using tools such as LabVIEW.
Schematic capture and PCB Design Layout in Altium.
Linear high power wide band RF amplifiers up to 200 Watts using for example GaN or LDMOS.
RF filter design.
Radio Transmitter and Receiver Design.
LNA, Down converter and Upconverter design.
Antenna design.
Use of oscilloscopes, analysers and signal generators.
Cadence AWR Microwave Office.
Ansys HFSS.
Switch mode PSUs, embedded circuitry, glue logic, analogue electronics and EMC circuitry.....Read more...
RF Design Engineer required, ideally Senior level to work on defence, military and avionics communications for long range real time video new product design and development. You will join a successful RF and Hardware Design team and work across the full product lifecycle from requirements through design, test, release and support of RF systems.
Requirements
British citizen eligible for security clearance
Radio Frequency System Architecture
RF Simulation
Altium Electronics Schematic capture, PCB Layout and Footprint or symbol Creation
Real time long range data link knowledge
High resolution video transfer understanding.
RF inhibitor exposure.
Bachelors or Masters degree in Engineering or related subject.
Role
RF Design for New Product Introduction or NPI and the evolution of existing world class RF systems for defence and aviation.
RF System Architecture exploiting the latest RF components and technologies.
RF Simulation using tools such as LabVIEW.
Schematic capture and PCB Design Layout in Altium.
Linear high power wide band RF amplifiers up to 200 Watts using for example GaN or LDMOS.
RF filter design.
Radio Transmitter and Receiver Design.
LNA, Down converter and Upconverter design.
Antenna design.
Use of oscilloscopes, analysers and signal generators.
Cadence AWR Microwave Office.
Ansys HFSS.
Switch mode PSUs, embedded circuitry, glue logic, analogue electronics and EMC circuitry.....Read more...
Are you an Embedded Software Engineer with 5+ years’ experience ready to step into a senior role?
Or an established Senior Embedded Software Engineer seeking a fresh technical challenge in an open, collaborative environment?
If so, this could be an excellent opportunity.
My client, based in Cambridgeshire, is a leading European designer and manufacturer of electronic test instruments and laboratory power supplies, supplying customers in over 50 countries worldwide. They are also one of the UK’s largest distributors of test and measurement equipment, representing major American, European, and Japanese brands.
Skills and Experience required for this Senior Embedded Software Engineer role based in Cambridgeshire:
Extensive experience in embedded firmware development and system architecture
Strong proficiency in C/C++, RTOS, and low-level interfaces (SPI, I2C, UART)
Solid understanding of microcontrollers, SoCs, and hardware/software co-design
Experience with system-level design, performance optimisation, and fault tolerance
Desirable Experience for this Senior Embedded Software Engineer role based in Cambridgeshire:
Background in safety-critical systems and compliance standards
Familiarity with modern development tools (Git, CI/CD, static analysis)
Strong analytical and problem-solving skills
Experience with real-time operating systems (e.G. FreeRTOS)
This is a fantastic opportunity to join a well-established, forward-thinking organisation offering an excellent technical environment and a competitive package. The role provides long-term career progression within a continually growing business.
To apply for this Senior Embedded Software Engineer role based in Cambridgeshire, please send your CV to Kyle Graveney at KGraveney@redlinegroup.Com....Read more...
An exciting opportunity has arisen for a System Engineer to join a cutting-edge team developing advanced Cyber and Information Assurance (IA) products. This role offers the chance to work across multiple development projects, applying innovative engineering solutions to complex, real-world problems.
What Youll Do
- Take technical ownership of system engineering activities across one or more IA product developments.
- Collaborate closely with hardware, software, FPGA and mechanical teams to define and deliver coherent technical solutions.
- Engage in requirements engineering, capturing, analysing and refining requirements across all design disciplines.
- Contribute throughout the full product lifecycle, from initial concept and architecture through to development, verification, and customer delivery.
- Support bid proposals and provide technical input to customer discussions to ensure solutions meet end-user needs.
What Were Looking For
- Degree in a relevant engineering discipline and 5+ years industry experience in systems engineering or a related field.
- Strong understanding of the systems engineering lifecycle, including requirements management, architecture, and product validation/verification.
- Broad technical awareness across multiple engineering disciplines, with expertise in at least one area.
- Ability to produce clear, concise technical documentation and communicate effectively with cross-functional teams.
- Experience using DOORS or similar tools for requirements management is an advantage.
- Must hold sole British nationality and be eligible for UK Security Clearance (SC).
Desirable Skills
- Knowledge of system design languages (UML, SysML) and techniques such as use-case analysis or trade studies.
- Experience preparing technical estimates for bids.
- Familiarity with mechanical and environmental qualification processes.
This is a fantastic opportunity for an experienced System Engineer, or an electronics/software engineer looking to broaden their scope, to play a key role in the design of unique, high-assurance products used in critical national security applications. Youll work with an innovative team tackling challenging technical problems and shaping solutions from concept to delivery.
TT....Read more...
A new and exciting opportunity has become available for an Embedded Software Engineer job, based in Northamptonshire required to join one of the global market leaders in defence and aerospace electronics.
They currently require an Embedded Software Engineer to join their rapidly expanding R&D department. In this role you will be part of a small team, developing software test applications to test electronic products.
Key Responsibilities for the Software Automation Engineer job will include:
- Develop and maintain low level test software, firmware and scripts to validate our products during Manufacturing.
- Develop fully automated TestStand and Labview test solutions to support production of ruggedised hardware.
This is a fantastic opportunity to join a small, dynamic team of design engineers working on the next generation of their complex, high speed digital electronic products.
Essential Skills needed for the Northamptonshire based Embedded Software Engineer job include:
- Strong Experience in developing Software using Embedded C.
- Strong Communication Skills.
- Experience in Developing Software for Bare metal.
- Degree in Software Development, Electronics or other relevant fields.
This is a unique job opportunity for an Embedded Software Engineer, to take the next step in their career with a business that has an outstanding record for the development and support of their staff. This is a fantastic opportunity to join a small, dynamic team of design engineers working on the next generation of their complex, high speed digital electronic products.
If you would like more information on the Embedded Software Engineer Job based in Northamptonshire, or if you would like to apply for the Embedded Software Engineer job, please contact Ricky Wilcocks on 01582 878810 or email him on rwilcocks@redlinegroup.Com, otherwise we always welcome the opportunity to discuss other engineering jobs.....Read more...
We are looking for a motivated Systems Engineer to join our dynamic engineering team. You will help drive projects that deliver innovative, high performance automotive technologies.
Responsibilities
Capture, analyse, and manage system requirements
Support system architecture and design using MBSE principles (SysML, MATLAB, Simulink)
Collaborate across hardware, software, and mechanical teams
Contribute to system verification through test specification and results review
Maintain requirements traceability and documentation using tools like Siemens Polarion, Jira, and Confluence
Skills
Degree in a relevant engineering discipline
Experience in Systems Engineering or Requirements Management
Strong problem-solving and communication skills
Automotive industry experience
Familiarity with UML, SysML, MATLAB/Simulink
Understanding of electric or hybrid powertrains....Read more...
An established engineering organisation operating within the maritime and defence sector is seeking a Senior Test Engineer to join its test and verification team. This is a fully onsite, hands-on engineering role, ideal for someone who enjoys working directly with hardware, test rigs, and live product testing rather than desk-based analysis alone.
You will play a key role in delivering robust testing and validation of complex mechanical products, supporting projects from early design through to final qualification.
The roleAs a Senior Test Engineer, you will provide technical leadership and hands-on expertise across test planning, rig design, execution, and reporting. You will work closely with project leads, engineers, suppliers, and third-party test facilities, ensuring products meet performance, quality, and reliability requirements.
This role sits within a fast-paced development environment and requires regular physical presence in the test facility. You will also support and mentor other test engineers and contribute to the continuous improvement of testing processes and capabilities.
Key responsibilities:
Capture test requirements from product specifications and engineering drawings
Support project reviews and provide technical input to test strategies
Develop detailed test plans, including rig allocation, scheduling, and hardware requirements
Design and produce bespoke test hardware (e.g. adaptor plates, test shafts) using CAD
Raise quotations and purchase orders for test and rig interface hardware
Create and review risk assessments to ensure testing is carried out safely and within operating limits
Assemble and operate test rigs, monitor live testing via data acquisition systems, and perform inspections at agreed intervals
Manage testing activities at external suppliers, OEMs, and third-party test facilities
Produce comprehensive test reports detailing methodology, data, conclusions, and recommendations
Present test results to internal stakeholders where required
Ensure compliance with QEHS requirements and promote 5S best practices
Actively support training and mentoring of junior engineers
Contribute to compliance with quality and environmental standards (e.g. ISO 9001, ISO 14001)
Support the ongoing development of the test facility as a centre of technical excellence
About you
You will ideally bring:
Proven experience in a Test Engineering environment
Strong hands-on experience with mechanical systems and test rigs
A degree (or preferably a Master’s) in a relevant engineering discipline
The ability to work independently with minimal supervision
Strong capability interpreting engineering drawings and designing test hardware using CAD
Confidence carrying out mechanical engineering calculations
Experience within the marine or defence engineering sectors (desirable)
Familiarity with test and monitoring tools such as LabVIEW or similar platforms
Hands-on experience with instrumentation and data capture equipment (e.g. thermocouples, LVDTs, tachometers)
Clear communication skills and the ability to work collaboratively across engineering teams
Strong report-writing skills with a high attention to detail
Commercial awareness and a practical, delivery-focused mindset
Willingness to undertake occasional travel
What’s on offer
A technically challenging, fully onsite and hands-on engineering role
Exposure to complex, high-integrity engineering products
The opportunity to influence test strategy and mentor others
A collaborative engineering environment focused on quality and continuous improvement
Long-term, permanent opportunity within a stable and growing organisation
If you are interested, please apply!
....Read more...
