A fantastic job opportunity has arisen for a Senior Manufacturing Engineer in East Sussex. My client is a global centre of excellence, specialising in the design and manufacture of electronic controllers, instrumentation, and drives.
The role as the Senior Manufacturing Engineer in East Sussex will be leading the NPI Development team and will be responsible for liaising with the relevant design staff to ensure the overall quality and delivery of new parts, to the highest standards. You will also work to ensure the proposed design concepts can be manufactured cost-effectively. You will oversee the prototype build of products in question, prepare relevant documentation and actively participate in PFMEAs (Process Failure Mode Effects Analysis) and DFMEs (Design Failure Mode and Effect Analysis). This role will also require you to work with Operations personnel to allow for the optimisation and layout of the assembly areas, as well as the assembly tooling used in the NPI build.
The Senior Manufacturing Engineer must have experience with PCBA and leading a manufacturing or production team.
As the Senior Manufacturing Engineer in East Sussex, you will have experience in a New Product Introduction (NPI) and New Product Development (NPD) role within electronics assembly, and/or PCB/cable assembly or electronics box build as well as experienced in the use of ERP/MRP systems (SAP Preferable). You will also have an Engineering Degree or equivalent and provable experience in a similar position. Awareness of all types of electronic printed circuit assembly techniques is beneficial.
My client are a Market Leader who combine over 30 years of experience within the Electronic engineering with the attitude and opportunity of a start-up company.
APPLY NOW for the Senior Manufacturing Engineer East Sussex job, or to apply for similar jobs, by sending your CV to rwilcocks@redlinegroup.Com, otherwise, we always welcome the opportunity to discuss other production jobs on 01582 878 810 or 079317 88834.....Read more...
Senior Test Development Engineer
Location: Livingston, Scotland
This is a senior engineering role with excellent career progression opportunities within a leading electronics manufacturing environment.
Key Responsibilities of this Senior Test Development Engineer, Livingston job are:
Test Solution Design & Development – Design, develop, and verify test solutions for electronic products, ensuring robust and efficient testing processes.
High-Level Assembly Testing – Create and implement test systems to evaluate the performance and signal output of electronic boards using advanced instrumentation.
Signal Analysis – Identify and analyse signal types and characteristics to ensure accurate test coverage and reliable performance validation.
Hardware & Mechanical Development – Support the development of basic electronic boards and assist with the design and assembly of mechanical enclosures.
Software & Automation Tools – Utilise LabVIEW and TestStand to develop, debug, and verify automated test sequences and scripts.
Instrumentation & Measurement – Integrate instrumentation for measurement, calibration, and validation of electronic devices under test.
Documentation – Produce clear and comprehensive test specifications and related engineering documentation.
Key Requirements of this Senior Test Development Engineer job, Livingston are:
Proven experience in electronics test development, including the design and implementation of automated test systems.
Strong hands-on knowledge of electronic circuits, components, and board-level schematics.
Practical experience using LabVIEW and TestStand for test sequence development, debugging, and verification.
Solid background in electronics design or product development, with the ability to understand and influence design for testability.
Excellent analytical and problem-solving skills, with a methodical and detail-oriented engineering approach.
Must be a British national (due to project security requirements).
To apply for this Senior Test Development Engineer – Electronics Manufacturing role in Livingston, Scotland, please send your CV to NDrain@redlinegroup.Com Or call 07961 158786.....Read more...
A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Engineer to join its on-site operations team in Cumbria.
In this role, you will be responsible for performing a range of technical and mechanical tasks to support production, assembly, and testing processes. You will contribute to maintaining high-quality standards and continuous improvement across manufacturing operations.
Key Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles.
Key Skills
Hands on experience in mechanical assembly, testing, or manufacturing environments.
Ability to read blueprints and perform precision tasks such as wire preparation, crimping, and harness termination.
Familiarity with hydraulic, electronic, and mechanical systems.
Strong problem-solving and diagnostic skills.....Read more...
A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Engineer to join its on-site operations team in Cumbria.
In this role, you will be responsible for performing a range of technical and mechanical tasks to support production, assembly, and testing processes. You will contribute to maintaining high-quality standards and continuous improvement across manufacturing operations.
Key Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles.
Key Skills
Hands on experience in mechanical assembly, testing, or manufacturing environments.
Ability to read blueprints and perform precision tasks such as wire preparation, crimping, and harness termination.
Familiarity with hydraulic, electronic, and mechanical systems.
Strong problem-solving and diagnostic skills.....Read more...
Electronics PCB Design Engineer required to join an existing product design team working on electronic and printed circuit assemblies PCBs for future products. This is a fantastic opportunity for an experienced engineer to work on cutting edge technology.
Requirements
Degree or in Electronics, Electrical Engineering, or related subject.
Over 5 years of experience in electronics and multilayer PCB design in a commercial environment.
Over 2 years recent experience using enterprise level PCB design tools Cadence OrCAD, Allegro or Altium Designer.
High speed digital design and PCB signal integrity, stack-up, impedance control, ESD mitigation, and EMC compliance.
Video or camera image processing.
RF and FPGA design knowledge.
Analogue and digital layout, design for test, and design for manufacture.
Interest in high accuracy GNSS and automotive applications contributing to product development from concept through to production.
Responsibilities
Design and layout analogue and digital electronics for PCBs, including component footprint creation and library management.
Determine PCB configurations, outlines, interfaces and interconnects.
PCB fabrication and assembly drawings, bills of materials, and manufacturing data.
Support PCB assembly and resolve manufacturing issues.
Develop and implement PCB production test strategies, including the creation of test platforms and fixtures.
Hardware design verification, troubleshooting, and debugging using oscilloscopes, spectrum analysers, and other test equipment.
Collaborate with firmware developers to ensure seamless integration of hardware and software.
Support product assembly, customer support, and product documentation creation.
Design reviews and document the results.
If you're an experienced Electronic PCB Design Engineer with a passion for high quality design and a collaborative approach to problem solving, keen to drive innovation in the GNSS and automotive sector, then this is role is perfect.....Read more...
Electronics PCB Design Engineer required to join an existing product design team working on electronic and printed circuit assemblies PCBs for future products. This is a fantastic opportunity for an experienced engineer to work on cutting edge technology.
Requirements
Degree or in Electronics, Electrical Engineering, or related subject.
Over 5 years of experience in electronics and multilayer PCB design in a commercial environment.
Over 2 years recent experience using enterprise level PCB design tools Cadence OrCAD, Allegro or Altium Designer.
High speed digital design and PCB signal integrity, stack-up, impedance control, ESD mitigation, and EMC compliance.
Video or camera image processing.
RF and FPGA design knowledge.
Analogue and digital layout, design for test, and design for manufacture.
Interest in high accuracy GNSS and automotive applications contributing to product development from concept through to production.
Responsibilities
Design and layout analogue and digital electronics for PCBs, including component footprint creation and library management.
Determine PCB configurations, outlines, interfaces and interconnects.
PCB fabrication and assembly drawings, bills of materials, and manufacturing data.
Support PCB assembly and resolve manufacturing issues.
Develop and implement PCB production test strategies, including the creation of test platforms and fixtures.
Hardware design verification, troubleshooting, and debugging using oscilloscopes, spectrum analysers, and other test equipment.
Collaborate with firmware developers to ensure seamless integration of hardware and software.
Support product assembly, customer support, and product documentation creation.
Design reviews and document the results.
If you're an experienced Electronic PCB Design Engineer with a passion for high quality design and a collaborative approach to problem solving, keen to drive innovation in the GNSS and automotive sector, then this is role is perfect.....Read more...
Manufacturing Engineer supporting precision instrument manufacture.
Key Skills
Optical Electronics or precision instrument manufacturing.
A degree in Physics, Optics, Electronics or equivalent industrial experience
CAD, reading electronic circuit diagrams, Opto-mechanical assemblies or writing scripts for automated measurements.
ERP Systems
You will contribute to the smooth running of the manufacturing line: kitting of parts, optical sub-assembly, mechanical pre-assembly, optical alignment, system test, performance reports, packing and shipping.
You will be doing
Continuous improvement, lean and 5S suggestions.
Cycle time reduction, cost reduction, quality and reliability initiatives.
Designing and sourcing jigs, tooling and fixtures.
Train Production staff as new processes, tools and product variants are introduced. ....Read more...
Manufacturing Engineer supporting precision instrument manufacture.
Key Skills
Optical Electronics or precision instrument manufacturing.
A degree in Physics, Optics, Electronics or equivalent industrial experience
CAD, reading electronic circuit diagrams, Opto-mechanical assemblies or writing scripts for automated measurements.
ERP Systems
You will contribute to the smooth running of the manufacturing line: kitting of parts, optical sub-assembly, mechanical pre-assembly, optical alignment, system test, performance reports, packing and shipping.
You will be doing
Continuous improvement, lean and 5S suggestions.
Cycle time reduction, cost reduction, quality and reliability initiatives.
Designing and sourcing jigs, tooling and fixtures.
Train Production staff as new processes, tools and product variants are introduced. ....Read more...
Converter and Inverter Embedded Power Electronics Engineer to join an existing Electronic Engineering team working from requirements capture, design and development of low cost, high reliability electronic and electric systems. You will have strong general electronic design and embedded firmware development ideally from the perspective of Power Electronics working through prototypes with test equipment and rework.
Skills
3 phase inverter, DC to DC converter, microcontroller and analogue electronic design.
PCB layout design of batteries, electric machines and wiring for manufacture.
Full electronics product life cycle design, requirement, prototype, test, rework and support.
Verification and validation test and simulation.
Schematic and assembly drawing using CAD tools.
EMC for power electronics
Beng in electronics, electrical engineering, mechatronics or related.
Hands on commercial experience in a similar Electronics development role.
Role
Design and build electronic components and circuits.
Design, analyse, and verify electronics systems throughout the engineering lifecycle.
Collaborate with Systems and Software engineers and on other cross functional teams on any issues.
Support manufacturing quality test and production where needed.....Read more...
Converter and Inverter Embedded Power Electronics Engineer to join an existing Electronic Engineering team working from requirements capture, design and development of low cost, high reliability electronic and electric systems. You will have strong general electronic design and embedded firmware development ideally from the perspective of Power Electronics working through prototypes with test equipment and rework.
Skills
3 phase inverter, DC to DC converter, microcontroller and analogue electronic design.
PCB layout design of batteries, electric machines and wiring for manufacture.
Full electronics product life cycle design, requirement, prototype, test, rework and support.
Verification and validation test and simulation.
Schematic and assembly drawing using CAD tools.
EMC for power electronics
Beng in electronics, electrical engineering, mechatronics or related.
Hands on commercial experience in a similar Electronics development role.
Role
Design and build electronic components and circuits.
Design, analyse, and verify electronics systems throughout the engineering lifecycle.
Collaborate with Systems and Software engineers and on other cross functional teams on any issues.
Support manufacturing quality test and production where needed.....Read more...
We are seeking a highly skilled Senior Electrical and Electronic Design Engineer to lead design projects from concept to delivery. This role involves supporting product realisation, mentoring junior engineers, and working closely with internal teams and customers to ensure technical excellence.
Responsibilities
Lead electrical and electronic design on projects, producing specifications and documentation.
Prepare cost estimates and provide technical input for quotations.
Design schematics, wiring schedules, and PCBs where required.
Review and sign off manufacturing drawing packs: support assembly and testing stages.
Liaise with customers to clarify requirements and support acceptance testing.
Provide technical guidance and mentorship to colleagues.
Requirements
Formal qualification in electronic and electrical design.
Five years industry experience in electrical engineering at design/implementation level.
Strong experience designing test equipment and analogue/digital interface circuits.
Eligible for UK Security Clearance (SC).
18th Edition certification.
Experience in power engineering.
Knowledge of National Instruments hardware and software.....Read more...
We are seeking a highly skilled Senior Electrical and Electronic Design Engineer to lead design projects from concept to delivery. This role involves supporting product realisation, mentoring junior engineers, and working closely with internal teams and customers to ensure technical excellence.
Responsibilities
Lead electrical and electronic design on projects, producing specifications and documentation.
Prepare cost estimates and provide technical input for quotations.
Design schematics, wiring schedules, and PCBs where required.
Review and sign off manufacturing drawing packs: support assembly and testing stages.
Liaise with customers to clarify requirements and support acceptance testing.
Provide technical guidance and mentorship to colleagues.
Requirements
Formal qualification in electronic and electrical design.
Five years industry experience in electrical engineering at design/implementation level.
Strong experience designing test equipment and analogue/digital interface circuits.
Eligible for UK Security Clearance (SC).
18th Edition certification.
Experience in power engineering.
Knowledge of National Instruments hardware and software.....Read more...
The Mechanical Manufacturing Engineer is responsible for complex electronic assemblies. Performing the lead role in implementing manufacturing processes and techniques using LEAN and Six Sigma tools.
Experience
Min BSc/ BEng in Mechanical, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Responsibilities
Lean Six Sigma
Responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality
Responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues.....Read more...
The Mechanical Manufacturing Engineer is responsible for complex electronic assemblies. Performing the lead role in implementing manufacturing processes and techniques using LEAN and Six Sigma tools.
Experience
Min BSc/ BEng in Mechanical, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Responsibilities
Lean Six Sigma
Responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality
Responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues.....Read more...
The Manufacturing Engineer is responsible for complex electronic assemblies. Perform the lead role in the implementation of LEAN manufacturing processes and use of Six Sigma tools.
You will become an expert in the manufacturing processes, train shop floor personnel and monitor key metrics. Also solve complex manufacturing problems and take an active role in troubleshooting quality and production yield related issues within manufacturing.
Key skills
Min BSc or BEng in Electrical, Electronic, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Role responsibilities
Lean Six Sigma, responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality, responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues. ....Read more...
The Manufacturing Engineer is responsible for complex electronic assemblies. Perform the lead role in the implementation of LEAN manufacturing processes and use of Six Sigma tools.
You will become an expert in the manufacturing processes, train shop floor personnel and monitor key metrics. Also solve complex manufacturing problems and take an active role in troubleshooting quality and production yield related issues within manufacturing.
Key skills
Min BSc or BEng in Electrical, Electronic, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Role responsibilities
Lean Six Sigma, responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality, responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues. ....Read more...
An exciting opportunity has arisen for a CAD Design Engineer based in Cambridgeshire to join one of the leading design and manufacturers of electronic test instruments and laboratory power supplies in Europe.
Supplying to over fifty countries, my client is one of the largest distributors of test and measurement equipment in the UK representing many leading American, European and Japanese producers within the UK market.
Due to expansion, they require a CAD Design Engineer who will be involved in the design of 2D and 3D CAD layouts for electronic products, including schematics, PCB layouts, BOMs and assembly drawings as part of the design output documentation.
A successful candidate for this CAD Design Engineer role based in Cambridgeshire will need:
- Degree qualified in Electronic Engineering, CAD or equivalent
- Experience of PCB design/layout.
- 3D CAD package, ideally E-CAD or CADSTAR
- Experience around Electro-Mechanical products
This role is perfect for someone looking to join an exciting and forward-thinking company who have a large presence within their industry.
My client can offer a hybrid working scheme with an early finish on Fridays
Unfortunately, my client is unable to offer a sponsorship. So, UK working rights will be needed.
If you have the right experience or are interested in this opportunity apply now! Please send your CV to kgraveney@redlinegroup.Com or for more information contact Kyle Graveney on 01582878817 or 07961158774.....Read more...
Mechanical Engineer required to design enclosures with electronic contents using FEA Analysis, CFD Simulation and 3D Modelling.
This is a hands-on mechanical design role working on concept to production of electronic housing and potting boxes from metal.
Key skills
3D mechanical CAD design experience including the preparation of tolerance engineering drawings
Ideally with Autodesk Fusion and Fema for vibration analysis.
Good degree in mechanical engineering or equivalent experience
Strong numerical and analysis skills
Practical mechanical engineering skills for building prototypes
Experience working on road vehicles professionally or as a hobby
Machine shop tools e.g. lathe, mill exposure.
Knowledge of Python for data analysis and visualisation
What you will be doing
Mechanical component design of two novel sensors, including a magnetic clamping system and mould for a potted device.
Resonance analysis in Femap and design vibration damping
Deploy and repair devices in the field
Write assembly and deployment procedures for your designs....Read more...
Electrical Harness Design Engineer required to design enclosures with electronic contents using FEA Analysis, CFD Simulation and 3D Modelling.
This is a hands-on mechanical design role working on concept to production of electronic housing and potting boxes from metal.
Key skills
3D mechanical CAD design experience including the preparation of tolerance engineering drawings
Ideally with Autodesk Fusion and FMEA for vibration analysis.
Good degree in mechanical engineering or equivalent experience
Strong numerical and analysis skills
Practical mechanical engineering skills for building prototypes
Experience working on road vehicles professionally or as a hobby
Machine shop tools e.g. lathe, mill exposure.
Knowledge of Python for data analysis and visualisation
What you will be doing
Mechanical component design of two novel sensors, including a magnetic clamping system and mould for a potted device.
Resonance analysis in Femap and design vibration damping
Deploy and repair devices in the field
Write assembly and deployment procedures for your designs....Read more...
Mechanical Engineer required to design enclosures with electronic contents using FEA Analysis, CFD Simulation and 3D Modelling.
This is a hands-on mechanical design role working on concept to production of electronic housing and potting boxes from metal.
Key skills
3D mechanical CAD design experience including the preparation of tolerance engineering drawings
Ideally with Autodesk Fusion and Fema for vibration analysis.
Good degree in mechanical engineering or equivalent experience
Strong numerical and analysis skills
Practical mechanical engineering skills for building prototypes
Experience working on road vehicles professionally or as a hobby
Machine shop tools e.g. lathe, mill exposure.
Knowledge of Python for data analysis and visualisation
What you will be doing
Mechanical component design of two novel sensors, including a magnetic clamping system and mould for a potted device.
Resonance analysis in Femap and design vibration damping
Deploy and repair devices in the field
Write assembly and deployment procedures for your designs....Read more...
Electrical Harness Design Engineer required to design enclosures with electronic contents using FEA Analysis, CFD Simulation and 3D Modelling.
This is a hands-on mechanical design role working on concept to production of electronic housing and potting boxes from metal.
Key skills
3D mechanical CAD design experience including the preparation of tolerance engineering drawings
Ideally with Autodesk Fusion and FMEA for vibration analysis.
Good degree in mechanical engineering or equivalent experience
Strong numerical and analysis skills
Practical mechanical engineering skills for building prototypes
Experience working on road vehicles professionally or as a hobby
Machine shop tools e.g. lathe, mill exposure.
Knowledge of Python for data analysis and visualisation
What you will be doing
Mechanical component design of two novel sensors, including a magnetic clamping system and mould for a potted device.
Resonance analysis in Femap and design vibration damping
Deploy and repair devices in the field
Write assembly and deployment procedures for your designs....Read more...
Senior Mechanical Design Engineer
Location: Lincoln, Lincolnshire, UK
An excellent opportunity for an experienced Senior Mechanical Design Engineer to join a global RF technology group as part of a specialist R&D team in the UK. This role focuses on designing and developing advanced mechanical solutions for RF, antenna, and electronic systems used across aerospace, defence, naval, space, and medical applications.
This position is ideal for a highly motivated and innovative engineer with extensive experience in mechanical design for demanding environments, who thrives on solving complex technical challenges and working collaboratively with multidisciplinary teams across international sites.
Main Responsibilities of the Senior Mechanical Design Engineer based in Lincoln, UK:
Lead and contribute to the mechanical design of RF, antenna, and system products from concept through CAD, prototyping, fabrication, and final assembly.
Collaborate closely with RF and electronics engineers to optimise designs for challenging applications and integrate systems effectively.
Produce detailed CAD models, drawings, and analysis for strength, vibration, thermal behaviour, environmental performance, and compliance with military standards (e.G., MIL-STD-810).
Support proposal generation with concept CAD, analysis, and presales input.
Develop and optimise prototypes, models, fixtures, and specialised test equipment.
Oversee environmental and mechanical testing, verification, and product qualification.
Work directly with suppliers and manufacturing partners to ensure high-quality fabrication and testing.
Industrialise designs and manage handover to production, including documentation, training, and assembly instructions.
Produce technical reports, customer-facing documentation, and participate in design reviews with customers.
Requirements of the Senior Mechanical Design Engineer based in Lincoln, UK:
Bachelor’s degree in Mechanical Engineering (Master’s preferred).
Extensive experience in mechanical product design, ideally within defence, aerospace, naval, or space applications.
Proven ability to deliver designs from concept to CAD, fabrication, and final assembly.
Experience in design for environmental requirements including vibration, shock, humidity, and ingress protection.
Strong expertise in environmental qualification, product testing, and verification.
Mastery of CAD tools (e.G., Solidworks, Autodesk Inventor).
Knowledge of composites, structures, aerospace, robotics, or electromechanical systems.
Practical experience in prototyping, machining, and assembly.
Experience working with suppliers, machinists, and toolmakers.
Proven track record of working directly with customers in a consultative and collaborative manner.
Excellent problem-solving skills, resilience, and attention to detail.
Desirable Experience:
Shipborne, maritime, or space-related equipment.
Thermal, ingress, corrosion, and EMC considerations in enclosure design.
Mechanical design of healthcare-related products.
Experience with FEA tools and MATLAB.
To apply for this Senior Mechanical Design Engineer role based in Lincoln, UK, please send your CV to: kchandarana@redlinegroup.Com or call 01582 878 830 / 07961 158 784....Read more...
Mechanical Engineer required to design and manufacture metal parts ideally for automotive application using FEA Analysis, CFD Simulation and 3D Modelling.
This is a hands-on mechanical design role working on concept to production of electronic housing and potting boxes from metal.
Key skills
3D mechanical CAD design experience including the preparation of tolerance engineering drawings
Ideally with Autodesk Fusion and Fema for vibration analysis.
Good degree in mechanical engineering or equivalent experience
Strong numerical and analysis skills
Practical mechanical engineering skills for building prototypes
Experience working on road vehicles professionally or as a hobby
Machine shop tools e.g. lathe, mill exposure.
Knowledge of Python for data analysis and visualisation
What you will be doing
Mechanical component design of two novel sensors, including a magnetic clamping system and mould for a potted device.
Resonance analysis in Femap and design vibration damping
Deploy and repair devices in the field
Write assembly and deployment procedures for your designs ....Read more...
Mechanical Engineer required to design and manufacture metal parts ideally for automotive application using FEA Analysis, CFD Simulation and 3D Modelling.
This is a hands-on mechanical design role working on concept to production of electronic housing and potting boxes from metal.
Key skills
3D mechanical CAD design experience including the preparation of tolerance engineering drawings
Ideally with Autodesk Fusion and Fema for vibration analysis.
Good degree in mechanical engineering or equivalent experience
Strong numerical and analysis skills
Practical mechanical engineering skills for building prototypes
Experience working on road vehicles professionally or as a hobby
Machine shop tools e.g. lathe, mill exposure.
Knowledge of Python for data analysis and visualisation
What you will be doing
Mechanical component design of two novel sensors, including a magnetic clamping system and mould for a potted device.
Resonance analysis in Femap and design vibration damping
Deploy and repair devices in the field
Write assembly and deployment procedures for your designs ....Read more...
Redline are working with a leading UK manufacturer and supplier of high-performance connector solutions, used across sectors such as aerospace, defence, industrial, and transportation. Due to continued growth, they are looking to appoint a PCB Design Engineer – Rigid-Flex to join their growing team.
Responsibility of the PCB Design Engineer – Rigid-Flex job based in Mansfield:
Design and develop Rigid, Flex, and Rigid-Flex PCB layouts
Produce multi-layer PCB designs incorporating Analog, Impedance Control, Power, Digital, High-Speed, and RF interfaces.
Carry out all PCB layout activities including schematic review, library creation, component placement, routing, and Gerber generation.
Use Altium Designer as the primary PCB layout tool(essential requirement).
Prepare documentation for PCB assembly, schematics, and fabrication using CAD tools such as SolidWorks.
Work in markets including Aerospace, Defence, and Space
Skills required for the PCB Design Engineer – Rigid-Flex job based in Mansfield
Proven experience as a PCB Layout Designer, PCB Drafter, or PCB Layout Engineer.
Strong understanding of complex PCB design principles, including noise reduction, EMI/EMC, thermal integrity, controlled impedance, signal integrity, and multilayer stack-ups.
Proficiency in Altium Designer
Solid knowledge of electronic components, circuits, and high-density PCB design.
Experience with Rigid/Flex/Rigid-Flex PCB structures and design rules.
Understanding of IPC standards for PCB design and fabrication.
If this PCB Design Engineer – Rigid-Flex job based in Mansfield could be of interest, send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878828 / 07471 181784.....Read more...
