A rocket engine, space thruster and chemical propulsion design and development client is looking for someone to join their Systems Engineering team. This is a critical role supporting space satellite propellant and other systems for key spacecraft manufacturers. You will work closely with the National and European Space Agencies for defence and scientific projects.
Due to continued Engineering team growth, there is an opportunity to join their Systems Engineering team, with training, support and commitment to professional development.
Skills
Mechanical and fluidic system engineering experience.
Ability to communicate effectively to a range of stakeholders, playing a key role in project teams and working closely with customers where needed.
Degree level in Mechanical Engineering, Chemical Engineering or a related subject.
Decision Making, take action consistent with facts, constraints, and consequences.
Duties
Perform pressurised propulsion system trade off analysis based on initial, top level inputs.
This is a role which requires flexibility and an ability to meet ambitious and often fluctuating deadlines.
Review and interpret higher level spacecraft requirements generating System Level requirements.
Perform System design including key Electrical, Harnessing Design, routing and schematic components.
Thermal equipment design and selection using System Analysis of Fluidic, Performance, Structural, Thermal, Reliability, Radiation, Hazard, Safety, Failure Modes Effects and Critical FMECA Analysis.
Advise on Manufacturing and Assembly Plan, process and procedures.....Read more...
DESIGN ENGINEER – INVENTOR/ILOGIC
Location: Crewe
Hybrid Working + Progression
Are you an experienced Design Engineer/CAD Technician with expertise in ILogic? We are thrilled to present an exclusive opportunity to join our prestigious manufacturing client based in Crewe. As their trusted recruitment partner, we are seeking a talented individual to join their CAD team due to their continued success and increasing demand for their exceptional products.
About the Role:
As a Design Engineer/CAD Engineer/AutoCAD Technician, you will play a vital role within a collaborative team environment. Your primary responsibility will be to create technical drawings that precisely adhere to customer specifications, ensuring seamless production by the manufacturing team. Key aspects of the role include:
Utilising ILogic, Autodesk Inventor and Vault to produce accurate and detailed drawings.
Developing scheme drawings and layouts for evaluation against customer requirements.
Generating manufacturing drawings with an emphasis on cost-effectiveness and ease of production.
Collaborating closely with colleagues across departments to ensure efficient project execution.
Key Requirements:
Proven experience as a CAD Technician/Design Engineer in a manufacturing environment.
Proficiency in AutoCAD, ILogic, Autodesk Inventor and Vault
Demonstrated ability to create high-quality manufacturing drawings.
Excellent communication skills, fostering effective collaboration with colleagues and customers.
Motivated, positive, and enthusiastic attitude towards work.
Proficiency in Microsoft Office and Google Docs, including spreadsheet management and Excel formulas.
How to Apply:
If you are an experienced Design Engineer/CAD Technician seeking an exciting opportunity to contribute to a highly successful manufacturing company, we want to hear from you! Please submit your CV through this advertisement for immediate consideration.
Get Recruited is acting as an Employment Agency in relation to this vacancy.....Read more...
Position: Facade Designer
Location: Hampshire
Salary: Neg DOE
The Job:
The Facade Designer will work closely with the Technical team and produce drawings to the necessary requirements for each project, must be experienced in rainscreen. Once settled into the role there may be a Hybrid opportunity
Facade Designer Responsibilities:
Review Architect’s drawings and propose design solutions.
Assist estimating in providing design solutions at enquiry stage.
Prepare fabrication drawings and cutting lists.
Review programme with Contracts Manager and agree design / procurement programme.
Visit site as required, assisting with contract / site management.
Keep abreast of product and system developments.
Ensure good economical design, encouraging standardisation of details, to achieve best use of available resources.
Prepare approval drawings and achieve approved status.
Prepare material schedules.
Send out purchase requisitions.
Liaise with consultants.
Prepare Design Safety Risk Assessments.
Prepare installation drawings / instructions.
Resolve technical difficulties.
Co-operate with preparation of valuations.
Facade Designer Requirements:
Minimum of 2 - 4 years of experience
Must have Rainscreen experience
Portfolio to illustrate previous work
Strong Technical and interpersonal skills
Proficiency in Autodesk AutoCAD and Revit are essential
Technically competent
Planning/scheduling, meeting deadlines
Monitoring and supervision of junior staff
Due to the urgency of this vacancy, it is not possible for our client at this time to consider anyone without the appropriate work permits, visas or sponsorship's already in place. Therefore, we are unable to consider candidates who do not have full authorisation to work in the UK. Applications submitted without the necessary visa in place will not be considered.
....Read more...
The Apprentice CAD Designer will be responsible for:
the design of project jobs relating to the company’s flexible insulation systems, using a range of CAD software systems in line with the company production schedule, as well as ensuring preparation of job parts for manufacturing including efficiencies and material utilisation
This role requires a motivated, switched on and reliable individual who can adjust to various tasks within the business
Design jobs in accordance with production schedule
Producing manufacturing and client design drawings
Preparation of jobs for manufacturing
Planning jobs for best use of materials ensuring efficiency and material utilisation
Transferring of jobs to the manufacturing facility
Managing of manufacturing paperwork and production of job packs
In most cases, the design work is based getting information and sizes from technical drawings and surveys, then inputting them into our design system which use scripts to produce drawings relating to manufacturing solution.Training:
Engineering and Manufacturing Support TechnicianLevel 3 Apprenticeship Standard
Level 3 Diploma in Engineering and Manufacturing Support Technologie
Training Outcome:
Full time position upon completion of apprenticeship
Employer Description:Insulcon Technical offer innovative passive fire protection and technical insulation solutions providing extensive savings in both materials and manpower.
From our headquarters in the UK, Insulcon Technical operates on a global scale, delivering hundreds of projects every year, we have a proven track record with the worlds leading energy sector companies providing extensive savings in labour and against budgets.Working Hours :Monday - Thursday, 07:30 - 16:40, Friday, 07:30 - 15:30Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Team working,Creative,Initiative....Read more...
As a Design and Construction Management Degree Apprentice, you will learn design, technical and management skills, and how to apply scientific principles and practical knowledge in constructing buildings to meet building performance criteria. You will gain a sound understanding of advanced computer technology in 3D Computer Aided Design and visualisation, as well as knowledge in the production of design details, and of administering contracts and projects to fulfil client and current regulatory needs.
You will then undertake focused professional engineering placements involving industrial areas such as explosive processing buildings, infrastructure, utilities and nuclear installations. You will gain an appreciation of the additional challenges and safety requirements of providing engineering services in such an environment throughout the engineering lifecycle (Design, Construction, Commissioning, Operations).Training Outcome:Career in engineering or further relevant CPD opportunities.Employer Description:For nearly 73 years, AWE has been at the forefront of nuclear weapons research and development. We have a critical mission: to provide the warheads for the UK’s ultimate deterrent – Trident. We also use our unique skills to provide wider UK government with counter-terrorism and nuclear threat reduction solutions.
Our role in nuclear defence and what we do to support the UK’s nuclear deterrent, is vital in defending our country from the most extreme threats and to keeping the peace.Working Hours :9 day fortnight.
33 hrs on the short week, 8hrs 15 mins per day.
41 hrs on the long week, 8hrs 15 mins per day Monday to Thursday and Fridays 8hrs.
Please note hours may alter due to University training times.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience....Read more...
Automotive Electronics Principal / Team Lead with strong Powertrain experience to lead a team charged with the design and integration of high voltage battery pack and systems for hybrid or electric vehicles.
Skills and Experience
Design and development of high voltage battery pack and high voltage systems hardware for hybrid and/or electric vehicles.
Hybrid and electric powertrain systems at vehicle, system and component levels.
NX CAD software.
Teamcenter for data management.
BOM definition and maintenance.
DFMEAs.
Responsibilities
3D concept design generation of high voltage battery pack and high voltage systems hardware.
Generation of system specification, and be responsible for delivery of hardware that meets system targets
Creation of detailed 3D CAD models and 2D drawings of high voltage battery pack and high voltage systems hardware
Lead the package integration of high voltage battery pack and high voltage systems
Tolerance studies....Read more...
Automotive Electronics Principal / Team Lead with strong Powertrain experience to lead a team charged with the design and integration of high voltage battery pack and systems for hybrid or electric vehicles.
Skills and Experience
Design and development of high voltage battery pack and high voltage systems hardware for hybrid and/or electric vehicles.
Hybrid and electric powertrain systems at vehicle, system and component levels.
NX CAD software.
Teamcenter for data management.
BOM definition and maintenance.
DFMEAs.
Responsibilities
3D concept design generation of high voltage battery pack and high voltage systems hardware.
Generation of system specification, and be responsible for delivery of hardware that meets system targets
Creation of detailed 3D CAD models and 2D drawings of high voltage battery pack and high voltage systems hardware
Lead the package integration of high voltage battery pack and high voltage systems
Tolerance studies....Read more...
Role: Principal Electrical Engineer Location: Glasgow or London, Hybrid (Required to be in the office 2/3 times a week) Salary: £60-80,000 + Benefits (Based upon location and experience) Our client, a prominent engineering consultancy, is expanding their UK team to address growing demand for critical infrastructure projects across the EMEA region. They are seeking an experienced Principal Electrical Engineer to support various power and renewable energy projects, including Solar PV, Battery Energy Storage Systems (BESS), Waste-to-Energy, and Data Centre design. This role is ideal for an electrical engineering professional skilled in high voltage systems and grid connections who is looking to work within a collaborative and innovative environment. Role Overview As a Principal Electrical Engineer, you will lead global design teams, managing project deliverables including drawings, single-line diagrams, and engineering studies. This role will focus on balance of plant, grid connection, and transmission infrastructure, as well as mentoring Graduate Electrical Engineers. Your expertise will also contribute to bid proposals, tendering, and client interfacing, ensuring quality project delivery. Key ResponsibilitiesLead complex engineering deliverables for multiple projects, ensuring compliance with UK Grid Code and other regulations.Oversee the selection of equipment and materials, managing budgets, schedules, and quality standards.Prepare and review engineering calculations and documentation.Serve as a technical expert, providing guidance on Solar PV, BESS, high voltage substation design, and transmission infrastructure.Support bid preparation and provide technical input for EPC contracts.About YouBachelor's degree in Electrical Engineering or equivalent experience.Significant experience on UK electrical engineering projects with an understanding of UK Grid Code and relevant HV systems.Demonstrated experience leading engineering teams and managing multiple projects.Knowledge of high voltage (HV) systems and experience in substation design.Desirable SkillsPrior experience with Solar and BESS projects, and data centre design.Familiarity with AIS or GIS systems at 220 kV and above.Proficiency in Protection & Control design and SCADA/Telecom architecture.Knowledge of DNO processes, EHV cable systems, and transmission lines.Strong understanding of construction, procurement, and contract administration.If you are interested in this Principal Electrical Engineer position based in Glasgow or London, please get in touch.''....Read more...
Through the process of agreement and preference, you will be selected for a design engineer discipline of either electrical, mechanical or structures and outfit. During the Engineering Higher Apprenticeship you will develop knowledge, skills, design toolsets (such as AutoCAD and Autodesk inventor) and behaviours within your engineering discipline whilst gaining valuable experience in design engineering which will culminate in you completing an End Point Assessment with a view of becoming an Associate Design Engineer. This will set you on the engineering career development ladder to potentially develop through the engineering levels, leading to the opportunity to progress to a Principal Design Engineer and beyond.
The Engineering Higher Apprenticeship is a 3-year scheme with the first 6 months spending time in Portsmouth Naval Base’s Skills and Development Centre, where you will develop your practical engineering skills. Following that, you will spend time in a number of different placements within related engineering departments where you will undertake a range of engineering activities and be exposed to different aspects of the project lifecycle. Also, within the Design Team you will experience placements with the other engineering disciplines to provide a wider perspective and all round engineering understanding. You will attend college during the first 2 years on a day release programme to complete the Higher National Certificate (HNC).
At the end of the 3 years, you will be required to complete and pass an End Point Assessment which confirms you have gained the required knowledge, skills and behaviour for the apprenticeship.Training:An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.Training Outcome:Approximately 95% of apprentices choose to stay on with us. As a global business, there is a world of opportunities – whether you decide to stay in the UK, or explore an overseas role.Employer Description:At BAE Systems, we provide some of the world’s most advanced, technology-led defence, aerospace and security solutions. We employ a skilled workforce of more than 93,000 people in around 40 countries. Working with customers and local partners, we develop, engineer, manufacture, and support products and systems to deliver military capability, protect national security, and keep critical information and infrastructure secure.Working Hours :Days and shift to be confirmed.Skills: Communication skills,Organisation skills,Team working....Read more...
Are you a professional in Electronics Design seeking your next opportunity? Would you like to work for a global leader offering a diverse international product portfolio driven by cutting-edge innovations?Insignis Talent is working with a leading Defense company who is actively seeking Electronic Design Engineers to strengthen their team due to increased workload.Positions are available for engineers at various career levels, catering to diverse interests such as detailed circuit design, sub-system integration, and leadership in technical project delivery. As a member of the Electronics Engineering team, your responsibilities will span board-level electronic design, prototyping, functional testing, and sub-system integration.Opportunities also exist to contribute to research and continuous improvement initiatives aimed at advancing Electronic Engineering capabilities.We seek engineers at different career stages specializing in one or more of the following areas:
Analog
Digital
Power
FPGA
Firmware
RF
EMC
Technical Leadership / Project Delivery
If you're ready to join a dynamic team on an exciting journey where your expertise and innovative thinking are highly valued, apply now to help shape the future of Defense engineering.Note: Due to the confidential nature of the work, successful candidates must pass a security clearance check....Read more...
Are you a professional in Electronics Design seeking your next opportunity? Would you like to work for a global leader offering a diverse international product portfolio driven by cutting-edge innovations?Insignis Talent is working with a leading Defense company who is actively seeking Electronic Design Engineers to strengthen their team due to increased workload.Positions are available for engineers at various career levels, catering to diverse interests such as detailed circuit design, sub-system integration, and leadership in technical project delivery. As a member of the Electronics Engineering team, your responsibilities will span board-level electronic design, prototyping, functional testing, and sub-system integration.Opportunities also exist to contribute to research and continuous improvement initiatives aimed at advancing Electronic Engineering capabilities.We seek engineers at different career stages specializing in one or more of the following areas:
Analog
Digital
Power
FPGA
Firmware
RF
EMC
Technical Leadership / Project Delivery
If you're ready to join a dynamic team on an exciting journey where your expertise and innovative thinking are highly valued, apply now to help shape the future of Defense engineering.Note: Due to the confidential nature of the work, successful candidates must pass a security clearance check.....Read more...
Role: Architectural/Fire Engineer
Location: Cork
Salary: Negotiable DOE
Our client are recruiting for an Architect/Engineer with Fire Engineering expertise to provide fire strategy compliance input to country-wide projects for which company provide fire engineering services.
Fire Strategy compliance input is required at all stages of project realisation - including feasibility studies, long-range planning studies, permitting and full design services including programming, design development, construction documents, and services during construction for design/bid/build and design/build projects.
The successful candidate will be a conscientious, self-motivated professional with strong communication skills. They will exhibit a passion and desire to apply their technical experience and knowledge in a team environment on technically challenging and professionally rewarding projects. Our team is seeking a person who understands the importance of meeting their targeted commitments while being flexible to the ever-changing and fast paced environment of our clients’ sites and willing to develop within a dynamic
Key responsibilities:
Developing fire strategies for a wide range of projects, using the relevant code recommendations such as TGD Part B & M, BS9999, BS 5588 as well as pertinent FM and NFPA standards.
Preparation and lodgement of Fire Safety Certificates and Disabled Access Certificate applications via the Building Control Management System (BCMS).
Provide internal FSC and DAC consultancy service for design and contract administration teams on building regulation matters.
Lead fire strategy discussions with design team, client representatives, building control and fire service.
Understand and Implementation of Insurer requirements with regards to reduction in property damage and business interruption risk.
Support BCAR Compliance and preparation of fire inspection reports during construction.
Supervise and train graduates on fire engineering principles and practises.
Perform quality review checks for deliverables.
Participate in design reviews, risk assessments and vendor bid evaluations.
Assist in the generation of proposals, scopes, schedules and budgets for projects.
Develop designer effort-hour estimates for Architectural/Permitting discipline.
Display strong communication and interpersonal skills and have the ability to work in a fast-paced team environment with multiple deadlines.
Proactive Architect with experience in all stages of project delivery (schematic design, site master planning, design development, construction
An understanding of local permitting legislation, building regulations, and health and safety legislation
Here's what you'll need
Qualified Architect/Architectural Technologist, 5+ years’ experience, with fire safety & disabled access certification background.
A postgraduate/bachelor’s degree in fire engineering preferable.
Strong understanding in fire safety engineering and a desire to develop their career further in this field.
Familiar with relevant codes and standards: Part B & M, BS 9999, BS 5588, etc.
Proficient in Microsoft suite (Excel).
Excellent English level - written and spoken,
Knowledge of Architectural specific design standards and building regulations
Ability to interact with engineering disciplines, clients, and vendors at all levels.
Experience using REVIT and BIM desirable.
Familiar with BCAR and BCMS.
Benefits
21 days holidays,
Professional membership fees paid by the company yearly.
Monthly CPD carried out in house.
Free parking at head office.
Pension contributions after time served.
Out of office lunch allowance when visiting site’s.
4PM finish on Fridays.
MC
....Read more...
Microwave Antenna Design Engineer required to help develop next generation of satellite communication antenna systems. Reporting to the Director, you will lead EM simulations, measurements, and analysis for dielectric lenses, feed antennas, and phased arrays. This role focuses on designing and optimising antennas using EM simulations and prototypes. Experience in phased arrays, transmit, RF lenses, microstrip antennas, and metamaterials is highly valuable. Knowledge of RF circuits, scripting, and RF measurement tools is a plus.
Key Responsibilities:
Design and analyse antennas (feed antennas, dielectric lenses, arrays, radomes).
Develop antennas for manufacturing and prototypes.
Analyse results using Matlab and Python to optimise models.
Lead or assist in antenna testing and measurements.
Present findings through reports and slides.
Requirements:
5 years in antenna design and analysis (lenses, phased arrays, radomes, beamforming).
Proficient in EM simulation tools like HFSS, CST, or FEKO.
Strong skills in Matlab, Python, and RF testing equipment.
Experience with Linux and leadership abilities....Read more...
Microwave Antenna Design Engineer required to help develop next generation of satellite communication antenna systems. Reporting to the Director, you will lead EM simulations, measurements, and analysis for dielectric lenses, feed antennas, and phased arrays. This role focuses on designing and optimising antennas using EM simulations and prototypes. Experience in phased arrays, transmit, RF lenses, microstrip antennas, and metamaterials is highly valuable. Knowledge of RF circuits, scripting, and RF measurement tools is a plus.
Key Responsibilities:
Design and analyse antennas (feed antennas, dielectric lenses, arrays, radomes).
Develop antennas for manufacturing and prototypes.
Analyse results using Matlab and Python to optimise models.
Lead or assist in antenna testing and measurements.
Present findings through reports and slides.
Requirements:
5 years in antenna design and analysis (lenses, phased arrays, radomes, beamforming).
Proficient in EM simulation tools like HFSS, CST, or FEKO.
Strong skills in Matlab, Python, and RF testing equipment.
Experience with Linux and leadership abilities....Read more...
We are looking for a Senior RF Antenna Design Engineer to help develop next generation of satellite communication antenna systems. Reporting to the Director, you will lead EM simulations, measurements, and analysis for dielectric lenses, feed antennas, and phased arrays. This role focuses on designing and optimising antennas using EM simulations and prototypes. Experience in phased arrays, transmit, RF lenses, microstrip antennas, and metamaterials is highly valuable. Knowledge of RF circuits, scripting, and RF measurement tools is a plus.
Key Responsibilities:
Design and analyse antennas (feed antennas, dielectric lenses, arrays, radomes).
Develop antennas for manufacturing and prototypes.
Analyse results using Matlab and Python to optimise models.
Lead or assist in antenna testing and measurements.
Present findings through reports and slides.
Requirements:
5 years in antenna design and analysis (lenses, phased arrays, radomes, beamforming).
Proficient in EM simulation tools like HFSS, CST, or FEKO.
Strong skills in Matlab, Python, and RF testing equipment.
Experience with Linux and leadership abilities....Read more...
We are looking for a Senior RF Antenna Design Engineer to help develop next generation of satellite communication antenna systems. Reporting to the Director, you will lead EM simulations, measurements, and analysis for dielectric lenses, feed antennas, and phased arrays. This role focuses on designing and optimising antennas using EM simulations and prototypes. Experience in phased arrays, transmit, RF lenses, microstrip antennas, and metamaterials is highly valuable. Knowledge of RF circuits, scripting, and RF measurement tools is a plus.
Key Responsibilities:
Design and analyse antennas (feed antennas, dielectric lenses, arrays, radomes).
Develop antennas for manufacturing and prototypes.
Analyse results using Matlab and Python to optimise models.
Lead or assist in antenna testing and measurements.
Present findings through reports and slides.
Requirements:
5 years in antenna design and analysis (lenses, phased arrays, radomes, beamforming).
Proficient in EM simulation tools like HFSS, CST, or FEKO.
Strong skills in Matlab, Python, and RF testing equipment.
Experience with Linux and leadership abilities....Read more...
A fantastic opportunity has arisen for a Project Architect to join a well-established firm of architects. This role offers excellent benefits and a competitive salary.
The ideal candidate will have 3-5 years experience in project management, design development, construction documentation, administration, and site supervision for high-end projects.
As a Project Architect, you will be responsible for leading architectural projects through all stages, from concept to completion, ensuring quality and sustainability.
You will be responsible for:
* Develop and oversee project details, specifications, and materials, ensuring alignment with the design vision.
* Manage and ensure the quality of project drawings, documentation, and specifications.
* Coordinate with multiple disciplines including architecture, structure, MEP, and interior design.
* Maintain consistent communication with clients, consultants, and project teams.
* Monitor project milestones and progress, ensuring adherence to schedules and timelines.
* Implement and uphold QA/QC procedures, ensuring compliance with all statutory requirements.
What we are looking for:
* Previously worked as an Architect, Project Architect, Associate Architect, Senior Architect, Lead Architect, Principal Architect or in a similar role.
* 3-5 years experience in project management, design development, construction documentation, administration, and site supervision for high-end projects.
* Possess post-part 3 experience.
* Background working across all stages of high-quality residential, commercial, or private villa projects.
* Skilled in AutoCAD, BIM (ArchiCAD), Adobe Creative Suite, and SketchUp.
* A strong portfolio demonstrating exceptional design development and project delivery.
Apply now for this exceptional Project Architectopportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Title: CAD Technician
Location: Meath
Our Client is seeking an experienced CAD Technician.
You will report into the Design Team of this growing business and take responsibility for dealing with CAD drawings on behalf of the clients. The company deal with high end contemporary bespoke works and high-quality commercial fit-out works. Your tasks will include:-
Provide working drawings and additional information to facilitate the design, manufacture, and installation of bespoke joinery.
Assisting with attending a design meeting on site with clients and management - and once a job is won, the MD will hand the project to you for production of working drawings.
Putting together detailed drawings using AutoCAD2d and Cabinet Vision.
Liaising with both clients and architects, taking notes and reporting back.
Liaise with shop floor production to ensure manufacture conforms with agreed drawings.
Drawing up bespoke items such as reception desks, featured wall panels, ceilings, elements, kitchen work, and cabinets.
Review quotes and minimize costs in accordance with working drawings
Occasionally attend site to undertake design meetings
Provide details to other trade contractors
Site surveys for drawing purposes
RFI (request for Information) Schedules
Sending samples of work and drawings out to clients for approval
Read and understand architectural drawings and produce drawings from the architect's design
Compile production checklists and produce purchase orders once an item is drawn and order the material needed for that order, and placing order on accounts software
Explaining all drawings to whomever manufactures it, whether in-house or subcontracted
To apply you will have:-
CAD Technician experience
Must have joinery drawings experience
AutoCAD 2D, Cabinet Vision experience essential
Solidworks experience a benefit
Ideally experience of being able to translate drawings for manufacturing purposes
Able to prioritise a busy workload
GW
....Read more...
EXCITING OPPORTUNITY: DESIGN ENGINEER – AUTOCAD 2D
Location: CreweSalary: £28,000 - £38,000
Are you an experienced Design Engineer/CAD Technician with expertise in AutoCAD 2D? We are thrilled to present an exclusive opportunity to join our prestigious manufacturing client based in Crewe. As their trusted recruitment partner, we are seeking a talented individual to join their CAD team due to their continued success and increasing demand for their exceptional products.
About the Role:
As a Design Engineer/CAD Engineer/AutoCAD Technician, you will play a vital role within a collaborative team environment. Your primary responsibility will be to create technical drawings that precisely adhere to customer specifications, ensuring seamless production by the manufacturing team. Key aspects of the role include:
Utilising AutoCAD 2D to produce accurate and detailed drawings.
Developing scheme drawings and layouts for evaluation against customer requirements.
Generating manufacturing drawings with an emphasis on cost-effectiveness and ease of production.
Collaborating closely with colleagues across departments to ensure efficient project execution.
Key Requirements:
Proven experience as a CAD Technician/Design Engineer in a manufacturing environment.
Proficiency in AutoCAD 2D and Autodesk Inventor (or similar software such as Solidworks).
Demonstrated ability to create high-quality manufacturing drawings.
Excellent communication skills, fostering effective collaboration with colleagues and customers.
Motivated, positive, and enthusiastic attitude towards work.
Proficiency in Microsoft Office and Google Docs, including spreadsheet management and Excel formulas.
How to Apply:
If you are an experienced Design Engineer/CAD Technician seeking an exciting opportunity to contribute to a highly successful manufacturing company, we want to hear from you!Please submit your CV through this advertisement for immediate consideration.
Get Recruited is acting as an Employment Agency in relation to this vacancy.....Read more...
About The Company
My client an established design and manufacturer of bespoke, turnkey food processing systems are currently looking to recruit an experienced Electrical Software Engineer with a strong background and experience in Programmable Logic Controllers (PLCs) and Human Machine Interfaces (HMIs).
The successful candidate will be responsible for the design, development and implementation of PLC and HMI software for a variety of automations platforms. You will play a crucial role in the entire project lifecycle, from initial design and hardware specification to site installation and commissioning.
This is an office-based role; however, candidates must have the ability and be willing to travel across the UK and Europe for onsite work.
Electrical Software Engineer - Package Details
To £65,000 dependent on experience
40 Hour Working Week (Overtime paid in excess of 40 hours)
Travel Costs & Expenses Paid (including travel time for business)
Access to company pool vehicles for business travel
25 Days Holiday + Bank Holidays
Pension Scheme
Free On-Site Parking
Electrical Software Engineer – Experience Requirements
Educated to Degree level in Electrical Engineering, Computer Engineering or a related field
Minimum 3 years’ experience in PLC and HMI Programming for multiple platforms
Previous experience of at least two of the following automation platforms – Omron, Siemens, Allen-Bradley and/or Mitsubishi
Strong understanding of Electrical Control Systems, including power distribution, motor control and instrumentation
Proficient in PLC programming languages such as Ladder Logic, Structured Text and Function Block Diagrams
Experience with PLC and HMI configuration software
Knowledge of electrical hardware components and control panel design principles
Ability to travel for site visits and installations
18th Edition qualification / experience
Electrical Software Engineer – Key Responsibilities
Develop and implement PLC and HMI software for various automation projects using industry-standard programming languages like Ladder Logic, Structured Text, and Function Block Diagrams.
Design, specify, and issue electrical hardware parts lists and control panels, ensuring compatibility with chosen PLC platforms.
Collaborate with electrical and mechanical engineers to ensure system integration and functionality.
Participate in the design review process and provide technical expertise on PLC and HMI aspects.
Perform site visits for installation, commissioning, and troubleshooting of automation systems.
Prepare technical documentation, including PLC and HMI code, control panel schematics, and user manuals.
Stay up to date with the latest advancements in PLC, HMI technologies, and relevant safety regulations
....Read more...
Senior Mechanical Engineer – Biotech Mechatronics – Cambridge
A spin-out Biotech company, based in Cambridge, is currently hiring several Senior Mechanical Engineers to join them and help accelerate the proof of concept, design, development, building, and testing of a novel life-saving biotech manufacturing device.
Your focus will be accelerating the proof of concept, design, development, building, and testing of the hardware of this new biotech device, collaborating with some excellent Medical Devices Physicists, Scientists, Electronics Engineers, and Design Engineers.
This role involves working on the design and development of this biotech manufacturing device, using 3D CAD. Therefore, specific CAD experience will be essential, ideally SOLIDWORKS.
We need senior-level candidates, someone who has worked on mechatronics, automation, robotics, precision devices or another complex electro-mechanical technology.
Due to the size of this company, you will be exposure to other areas of the business, including third-party meetings and attending Biotech, Medical Devices and Science conferences and trade shows. Consequently, it would be ideal if you have previously worked for a start-up/scale-up company or worked for a Medical Devices/Biotech/Scientific Design Consultancy and know what it’s like to wear multiple hats when needed. Experience in Medical Devices, Scientific or Biotech companies is not essential; we can also look at candidates from other complex sectors.
The technology you will be working on will save lives. I can provide more details once you have made an application. Most candidates I have spoken with find the work rewarding due to the impact this work will have on lives.
It is expected that you would hold a degree and a masters in a related Medical Devices, Mechanical Engineering, Design Engineering, Electronics Engineering, or another relevant scientific subject that led you into a Mechanical Engineer role.
You will also be rewarded with an excellent starting salary, enhanced pension, bonus, healthcare, other benefits, and future career development as the company grows while also working in an interesting field on a product that could help a lot of people.
As this is an exciting role, joining a start-up company at the beginning of their journey, I’m expecting a lot of interest in the role. So, if you are interested, please apply straight away or risk missing out to someone else.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you.....Read more...
Insignis Talent is working with a prominent company at the forefront of delivering innovative technology and solutions for the protection and empowerment of naval forces worldwide. As the maritime and underwater battlespace continues to evolve, our client is dedicated to pushing the boundaries in developing advanced specialist systems that provide an unbeatable warfighting advantage. They collaborate closely with their customers to ensure mission success and offer a range of groundbreaking technologies, including state-of-the-art sonar, radar, expendables, signature management, and naval power systems.As an FPGA engineer, you will typically be responsible for a wide range of FPGA activities covering all stages of the development lifecycle; from requirements through to implementation, verification and validation of programmed devices. You will work within an FPGA focused team environment where co-operation, innovation and thoroughness are essential to develop FPGAs that successfully meet project objectives. Training and development opportunities for career progression are available with this role.Key responsibilities for this role include:
FPGA Implementation including requirements capture, RTL coding and physical stages
Definition of the conceptual structure and architecture of FPGA designs
Writing and execution of testbench code and other Integration, Validation and Verification activities
Adherence to safety related standards and processes and contributing to their development and maintenance
Model Based design techniques using Matlab/Simulink modelling and simulation
Requirements tracking, configuration control, incident reporting and project documentation
Lab support during hardware development stages
Inter-team and intra-team communications, including reviewing
Skills, Qualifications, and Experience Required:
Degree or higher in electrical/electronic engineering or equivalent
Proven track record of FPGA/ASIC design
Comprehensive knowledge of VHDL with practical experience in successful projects
Experience of model-based design using tools such as Matlab/Simulink is preferable
Capability of working to formal FPGA/ASIC design processes is essential
Broad knowledge of digital electronics and other areas of engineering. (e.g. systems, analogue/power electronics, mechanical, motors, etc)
Good knowledge of best practice design lifecycle process; gated design phases, design reviews
Good in front of customers; willing and able to make presentations
Benefits: Our client offers a comprehensive package of employee benefits and opportunities for career development, recognizing the importance of every employee's contribution to their success. The benefits include:
5% bonus
Flexible working arrangements where possible
9-day working fortnight, providing an extended weekend every other week
Hybrid working
25 days of holiday with the option to buy/sell 5 days plus bank holidays
4 times your annual salary in life assurance
Flexible benefits package (retail vouchers, health screening, and more)
Pension Scheme - Less than 5 years’ service up to 5.5% employer contributions, 5 years’ service + up to 7.5% employer contributions
Relocation Support - provided on a case-by-case basis per role and subject to HMRC guidelines
Security Requirements: Candidates must be eligible to obtain the relevant security clearance required for the role, due to the nature of the programmes delivered for customers.....Read more...
Insignis Talent are currently working with a multi-national Maritime Defence company, who’s broad portfolio of capabilities is operational on UK naval fleets and allied navies worldwide. They specialise in the design, development and production of the key elements of mission critical, intelligent and highly regulated solutions across surface, sub-surface and unmanned platforms.Currently, they're in search of a Power Engineer to permanently join their team. Based in Staffordshire, your role will involve supporting the design, manufacturing, and distribution of innovative, high-power static converters and motors. As part of this team, you'll be responsible for delivering durable and cost-efficient power electronic solutions for various specialized applications, including submarine power systems, high-integrity power supplies, naval propulsion, and specialized industrial drive systems. You'll engage in all stages of the engineering process, from conceptualization to verifying and validating production systems.Key Responsibilities:
Undertake diverse engineering tasks spanning from project inception to completion
Plan and execute engineering assignments, requiring judgment in selecting and adapting designs to meet specified requirements
Ensure the technical performance of the product meets expectations
Collaborate closely with senior team members to plan and coordinate projects
Coordinate technical activities within the team
Serve as the primary technical liaison with clients
Contribute to project meetings and deliver comprehensive technical and progress reports
Stay updated on advancements in the field by attending seminars and reviewing technical literature
Support other business initiatives such as process improvement endeavours
Qualifications and Experience:
Hold a degree in electrical engineering or a related field, or equivalent qualification
Proficiency in design/simulation tools like MATLAB and Simulink
Demonstrated expertise in power electronics
Track record of successful product design and testing within a relevant context
Broad understanding of other engineering domains (e.g., systems, mechanical, motors, etc.)
Familiarity with best practices in design lifecycle processes, including gated design phases and design reviews
Ability to effectively engage with customers and deliver presentations
Experience in live testing of low-voltage electronic or electrical equipment (i.e., <1000V)
Important information: Roles require security clearance without restrictions. The successful candidate must be able to obtain this....Read more...
An Aerospace Engineer Degree Apprenticeship will prepare you for a career within our engineering and design teams, over a four-year programme. Examples of target occupations/functions listed below:
Design Engineering - Design Engineers are involved from the early phases of concept development right through to design, supporting in-service product repairs and upgrades. You will work closely with our customers to provide innovative solutions to a variety of wing related components, sub-assemblies & complex integrated assemblies
Analysis - Analysis Engineers work closely with all engineering functions. Key activities include loadsets, sizing, optimisation, strength, & test reports
Manufacturing Engineering - Manufacturing Engineers operate across the whole business, from product concepts through to design, procurement, manufacturing and end-product support. As a Manufacturing Engineer you will work closely with Design, Engineering, Operations, Procurement, Customers & Suppliers to achieve world class cost, quality & delivery objectives
Training:Year 1: The majority of your first year will be working offsite at college. Towards the end of the first year, you will undertake a return to site induction followed by onsite GKN training.
Years 2 & 3: You will undertake Business Familiarisation, which involves working to a rotation plan in Design, Analysis, Materials & Processes, Component/ Assembly Production, Manufacturing Engineering and Quality. All work carried out within placement areas will be recorded in work packs. These will be reviewed monthly with your GKN Training Advisor. You will return to college/university on day-release to continue studying in the classroom for your degree.
Year 4: You will be assigned to your final placement and will spend the year specialising in this area. You will also finalise your Degree and Level Four Competence Qualification during this time, as well as completion of your End Point Assessment.
Mandatory courses according to the Apprenticeship Standard:
Level 2 Diploma in Aerospace and Aviation (Foundation Competence)
Level 4 Diploma in Engineering and Advanced Manufacturing (Development Competence)
Level 6 Bachelor Honours Degree (BEng) Stipulated by the employer and accredited by an Engineering Council licenced Professional Engineering Institution
Functional Skills Level 2 (GCSE equivalent) in English for those with less than a Grade 4/C
Training Outcome:Successful candidates may have the opportunity for progression to a full-time role after completion, but this is not guaranteed. Employer Description:Every day, around the world, we help aircraft fly further, faster & greener. We’re the world’s leading tier one aerospace supplier of systems and components. With over 15,000 employees across 41 manufacturing sites in 13 countries serving over 90% of the world’s aircraft & engine manufacturers with sales of £2.8bn. Together as “One GKN” we’re moving our business & industry forward developing technologies that rapidly decarbonise aircraft, and innovating to help build a new generation of planes that produce zero emissions. We’re putting sustainability at the heart of what we do; driving our objective to becoming a net zero greenhouse gas emissions business before 2050!Working Hours :Monday - Friday.
Shift times to be confirmed.Skills: Attention to detail,Problem solving skills,Team working....Read more...
Building services engineers are responsible for ensuring that the electrical, mechanical and other systems within buildings work effectively and efficiently. Well-designed and maintained building services systems are essential in supporting people with their busy lives and help them maximise the benefits from their built environment.
Our design approach to Building Services Engineering is to understand the client’s brief, interrogate the needs and operation of the building and use innovative methods in the design process.
As buildings are responsible for over 40% of the world’s energy consumption, Building Services Engineers have an important responsibility to minimise carbon emissions, reduce energy consumption, adapt to regulatory change and deliver on the sustainability agenda.
Duties will include:
Working as part of a design team delivering detailed design
Assisting with the creation of specifications and schedules
Using specialist computer-aided design (CAD) and BIM (Revit) software and other resources to design the systems required for the project
Site surveys and monitoring
Attending design workshops and client meetings
Liaising closely with other professionals, including structural engineers, architects, surveyors, and contractors of in-house and external project teams
Report writing
Producing asset registers
Training:You will be studying for BEng (Hons) in Building Services Engineering as well as achieving Incorporated Engineer status with the Chartered Institute of Building Services Engineers (CIBSE) at your End Point Assessment.
In addition:
We’ll give you the structure you need to allocate the right amount of time to your studies, and your line manager will be focused on providing the right learning opportunities
You’ll become part of our Future Talent Community, connecting everyone on our programmes into a safe, supportive and enjoyable space. You’ll have opportunities to formally network with each other, as well as building your own connections on a personal level.
A full variety of CPD opportunities including webinars, short courses and masterclasses
Allocated mentor to act as your trusted advisor throughout your programme
Tailored development plan to strengthen your soft skills and leadership
You’ll become a STEM ambassador
You’ll have a buddy to support you with the day-to-day aspects of working at Ridge, someone who has trodden the same path and you’ll feel comfortable talking to about the little things!
Training Outcome:We pride ourselves on a strong culture of internal development and progression. You will be supported towards becoming fully Chartered and will benefit from excellent opportunities to develop yourself and your career with a variety of courses, learning and workshops. Employer Description:Ridge is a Built Environment Consultancy, helping our clients to create better places for people to live, learn and work. We are enabled by great people who are inspired and proud of what they do and respected for who they are.. We continually expand our expertise and nurture our talent – with a focus on quality, innovation and growth. Our multidiscipline team of 1,100+ people is based across 11 offices.Working Hours :Monday to Friday 8.30am to 5.00pmSkills: Communication skills,IT skills,Attention to detail,Problem solving skills,Logical,Team working,Initiative....Read more...
