We are looking for a Roofing and Cladding Designer to work on a permanent basis in Warrington.
Salary is c£25-40,000 per annum (negotiable, depending on experience) plus holidays, pension etc
Roofing and Cladding Designer Role & Responsibilities
You will have previous experience working for a roofing/cladding/building envelope company
Dealing with various Roofing & Cladding systems dependent on project specific requirements the successful applicants main Roles & Responsibilities would be as follows.
Produce project specific working drawings.
Produce project specific Fabrication drawings.
Review project contact drawings & specification, i.e. Architects, Structural Engineers, Steelwork, etc, and raise any necessary design queries.
Attend Design meetings both on site and via Teams where necessary.
Liaise directly with Customers, Architects, etc, as part of the design process.
Liaise with system manufacturers and suppliers.
Liaise with site staff, supervisors, installation operatives, etc, in respect of any design related issues.
Material scheduling and procurement.
Site measuring and surveys as and when necessary.
If the Roofing and Cladding Designer culd be of interest, please call me on 01744 452 037 or press APPLY NOW!....Read more...
My client specialises in the defence industry, produces and maintains various types of weapons, materials, Aircraft emergency evacuation systems. They are also involved in creating composite materials such as carbon fibre tubes and aero-structures. The manufacturing engineer will be the technical owner of the process including work instructions, equipment, tooling, and other facility requirements.
Primary Responsibilities:
Responsible for tooling design and documentation. Must have the experience with 3D CAD and 2D drafting.
Provides hands-on support for manufacturing assembly of company products.
Technical writing.
Strong understanding and experience in Design for Manufacturing (DFM), Design of Experiments (DOE), Failure Mode Effects Analysis (FMEA), and process hazard analysis (PHA).
Apply working knowledge of product design and assembly to the manufacturing process
Maintain equipment and tooling through coordination with maintenance team.
Coordinate and perform all necessary validation and or process engineering evaluations as needed for manufacturing equipment.
Preferred Qualifications:
BS or MS in Engineering discipline or Physics.
8+ years industry-relevant experience preferred, though others will be considered.
Experience with Lean Manufacturing.
3D solid modelling experience. Minimum 5 years.
Experience designing, installing, and qualifying production equipment including hand tools, fixture, and semi-automated equipment.
Familiar with typical metal working tolerances produced by milling, grinding, turning, and laser or water jet cutting.
Candidates will be put forward for Security Clearance (SC) once the job has been accepted....Read more...
Fire Alarm Design Engineer
Rochester
£30,000 - £40,000 Basic + Training and Development + Accredited qualifications + free parking + long term stable career + close knit team + Private health care + medicash + additional annual for years in service + 20 days holiday
Enjoy a fire alarm design engineer role for a leading fire and security contractor who continue to grow and expand due to fantastic staff retention and big clients. Work in a close knit team where you’ll be supported and trained to become an expert in your role. Long term you’ll benefit from a company that will support you and provide a progressive long term career.
Established over 15 years ago, this leading fire and security contractor is seeking a fire alarm design engineer to join their team due to continued growth within the business. You’ll work closely with senior people and the sales team to carry out drawings and specifications, whilst receiving both internal and external training to become a respected member of the team.
The role of the fire alarm design engineer will involve: *Working in a close knit team to support the sales department completing designs for a list of commercial clients. *Attend meetings with clients and other departments on site when required *Be office based, produce drawings and specifications for fire alarm systems
The successful fire alarm design engineer will have: *Experience working with Auto cad and designing fire alarm systems and have BS 5839 *Be commutable to Rochester and happy to travel into London or sites when required *Office based role
For immediate consideration please call Emily on 0203 813 7951 and click to apply.
Keywords: Fire Alarms, design engineer, Fire alarm systems, BS 5839, design, Engineer, Building services, electrical, Rochester, Gillingham, Chatham, Hempstead, Rainham, Darland, South East london, Kent
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website at futureengineer.co.uk to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Engineering Manager
Salary up to £75k (DOE)
As the engineering manager, you will be overseeing the engineering capacity of the organisation, supported by our highly skilled R&D team. You will be working to progress the companies hardware products, putting in place effective management processes to ensure the engineering department succeeds. This will entail both developing new products and improving the existing product range, as well as establishing good design and test practices. Your main responsibilities will be:
Key Responsibilities
- Management of all engineering projects and overall planning and strategy of the engineering department.
- Communication with stakeholders on the aims, objectives, timescales, and outcomes of engineering projects.
- Implementing best-practice processes for product design and testing, including FMEA.
- Redesigning existing products to deliver better performance, improve manufacturability and reduce cost.
- Creating new products and solutions to meet commercial requirements.
- PCB and Electronics design, prototyping, up-issuing and obsolescence handling.
- Ensuring correct change-control procedures are adhered to.
- Ensure all investigations and technical decisions are planned and documented effectively.
- Provide technical expertise to other areas of the business as required.
The Right Person
The ideal candidate for this job would be somebody who is proactive and driven, capable of leading reform and establishing good practice. The devices that are developed are complex measurement instruments deployed in difficult environments so a background in sensors or ingress protection would be beneficial. as well as having experience in the following areas:
- Masters degree or equivalent in Electronic Engineering, Mechatronic engineering or similar.
- 6+ years industry experience.
- 2+ years management experience, including projects and people.
- Good communication skills
- Design of low power mixed signal PCBs.
- Fault finding electronics, sensors, and embedded software.
- Design-for-manufacture.
- Design-for-test, FMEA, Six Sigma, or equivalent.
- Development from prototype through to manufacture.
- Technical writing and documentation.
- Change control and repository management.
- BoM creation and obsolescence.
- EMC compliance
The following skills would be beneficial to a good candidate, but are not essential to the role:
- Assembly and fabrication, including SMD soldering and re-work (e.g. for prototypes).
- Mechanical design.
- 3D CAD skills (e.g. SolidEdge)
- Sensor calibration and test automation.
- Rapid prototyping.
- Data analysis and strong numerical skills.
- Adherence to standards or certifications (e.g. BSI, ISO, CE)
Interested? Here are your three options
1. This is the job for me, I meet all the requirements Call now and lets talk through your experience. Ask for Jon Webster on between 8.30am 5.30pm
2. I think Im right for this position, but Im not sure about some of the detail Click apply now so I can read your CV and come back to you.
3. Im interested but need to know more about what this job can offer me email jon@precisionrecruitment.co.uk with your CV and questions and I will reply with more detail.
Precision are committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system.
PPTP....Read more...
Catfoss Recruitment Ltd are currently in partnership with a cutting-edge technology company that is looking to recruit an Electrical Engineer to their expanding team on a permanent basis.Building on more than two decades of science led research and development, our client designs and manufactures pioneering power generation technology.What we are looking forYou will work in the Electrical, Instrumentation and Control team. The electrical engineer is in charge of the specifying right technical specification of power supply unit on Proposals, FEED and EPC Projects. Key interactions of the electrical engineer are internally with Project teams, Procurement, Compliance, Quality and others engineering disciplines, externally with Clients, Vendors, Suppliers.Responsibilities• Prepare the power electronics technical specification and hardware planning with respect to regional grid connection conditions and project requirements• Design and preparation of power supply unit specifications based on international design codes and standards (IEC, NE, ATEX, CE)• Develops electrical system architecture, electrical system requirements, electrical schematics, harness drawings, single line drawings and field wiring diagrams• Participate in new product development teams• The design and development of complex busbar and cable interconnections• Assist in the development of plant layout, to reflect electrical design considerations• Creating equipment specifications (transformers, rectifiers, switch boards)• Approval, checking and preparation of design/engineering documentation (e.g. cable schedules, single line diagrams, load schedules.)• Act as a technical authority on electrical issues• Creating Bills of Material/equipment lists and single line diagrams• Carrying out cable calculations• You play an essential role in risk assessments, which make a key contribution to the safety and quality of our products• Review engineering deliverables prepared by external engineering contractors• Conduct power supply unit technical analysis and final supplier selection based on quality, technical and commercial considerations (Bid review based on good engineering practice)• Managing of FEED, basic and detailed engineering phase and technical follow up ensuring proper communication with vendors• You manage budget, schedule and quality constraints, lead the determination of total cost of installation in cooperation with other disciplines and performing meetings with suppliers• Vendor document management within proposals phase and project executionAbout YouKnowledge and Experience• Bachelor’s or master’s degree level or equivalent, in Electrical Engineering• 5+ years of experience in electrical and hardware planning for process engineering (large-scale)• Extensive knowledge of the current European and North American standards and regulations in electrical engineering• Experience in the field of electrical protection concepts• Good command of technical documentation• Familiar with hardware planning using electrical CAD systems• Superior communication skills• Ability to manage projects and multi-task effectively• Excellent follow-through• Must be driven and self-motivated• Understand safety, compliance, statutory and regulatory requirements• European travel is essential in this role so you must have availability to travel internationally to site and vendors workshop• Capable of critical thinking with solid decision-making skills• Strong time management skills, including prioritisation management• Proficient with Microsoft suite of products, particularly ExcelHighly advantageous• Experience with hazardous area design and equipment selection – in accordance with ATEX standards (60079)• Additional technical know-how in SOEC, SMR, fuel cells, clean fuel, energy storage systems and/or chemical synthesis (e.g. ammonia, methanol) is a plus• Experience in chemical process engineering in EPC in carrying out Pre-FEED / FEED / Detailed engineering work• A deep and thorough understanding of codes, regulatory requirements of hydrogen industry practices• Knowledge of ATEX Directive and other legislation related to explosive atmospheres• Proven history within a design engineering background working with high power equipment• Knowledge of electrical installation design• Knowledge of wiring and schematics• Some knowledge of grid connection, HV requirements and design is also preferred• Knowledge of protection and coordination desirable• Knowledge of rectifier units desirable• Knowledge of EMC requirements and standards desirableElectrical Engineer previous suitable job titles: Senior Electrical Engineer, Principal Electrical Engineer, Lead Electrical Engineer, Electrical Design Engineer, Electrical Power Engineer, Chartered Electrical Engineer, Chartered EngineerPlease apply ASAPDue to current high volumes of applications to our advertised jobs, we are unable to respond to every application. All successful candidates will be contacted as soon as possible.....Read more...
Human Factors Design Engineer – Medical Devices – Cambridge
A Medical Devices company, based in Cambridgeshire, is currently looking for a Human Factors Design Engineer to assist with the ongoing development of new Medical Devices.
Working alongside an established R&D team, your role will be of paramount importance in ensuring that product design adheres to Medical Devices standards, taking into account Product Development, Industrial Development, and Human Factors Development factors, specifically ISO 13485, ISO 14971, and IEC 62366 standards.
You will need to have prior experience in the Medical Devices sector, which could have been gained in industry or through PhD/Post Doc roles. We are open to candidates with varying levels of experience, and the salary range will be determined based on your experience.
Due to the nature of this company's work, you will be at the forefront of the medical devices sector, constantly learning new concepts and generating innovative ideas on a daily basis.
It is expected that you hold a degree in Human Factors, Industrial Design, Product Design, or another related subject that has led you to specialize in the Human Factors role, particularly in the Medical Devices sector.
You will be rewarded with an excellent starting salary, a bonus, career development opportunities, ongoing skills enhancement, and a wide range of benefits.
I anticipate a high level of interest in this role, so if you are interested, I recommend submitting your application now to avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Scientific recruitment specialists Newton Colmore, on 0121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you. Please note we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
Do you thrive in a dynamic environment, shaping the future of secure communications?
Holt Executive is collaborating with a leading provider of global defence and security solutions.
Our client is seeking a Senior Systems Engineer to play a critical role in delivering key engineering services for the MOD and government partners.
The successful Senior Systems Engineer will be vital across various projects in communications, signals intelligence, situation awareness, and CEMA Maritime. You will spearhead the development of next-generation, beyond-line-of-sight radio frequency communication solutions, ensuring success for both national and international clients.
Key Responsibilities for the Senior Systems Engineer:
- Spearhead cutting-edge design solutions by maturing system architecture, product design, and delivering high-quality contract engineering deliverables.
- Navigate complex integrations, owning and directing interfaces and trade-offs between systems, subsystems, and functionalities.
- Bridge the gap from concept to reality, leading technical solutions for customer requirements from ideation to in-life support.
- Bring innovation to life by developing, building, testing, and trial solutions that push boundaries.
- Ensure clarity and precision by creating comprehensive and high-quality design documentation.
Key Skills and Experience for the Senior Systems Engineer:
- Hold the ability and drive to think with a systems perspective as defined by INCOSE.
- Ability to create and manage interfaces, specifications and certificates, producing boundary views and identifying ownership across the System of Interest (SoI), Wider Systems of Interest (WSoI) and its environment.
- Engineering expertise across the engineering lifecycle V-Model from initial concepts, requirements, design, implementation, integration, verification, validation, maintenance and supportability
- You will demonstrate System concepts and lifecycle selection, System capability issues, Enterprise and technology environment, Architectural design, Concept generation and Functional analysis.
- HNC/HND or Degree in Telecommunications or Electronic Engineering however, our client values difference and does not have a fixed idea when it comes to background or education, provided you can show the required level of experience and/or willingness to learn.
If your skills and experience match this Senior Systems Engineer opportunity, we encourage you to apply by sending your CV to info@holtexecutive.com
....Read more...
Job Title: Contract Design Engineer
Duration: Minimum 3 months (with potential for extension)
Location: Leeds or Home based (3 nights away in Surrey onsite)
Hourly Rate: £35-£40 per hour (Outside IR35)
Immediate Start
About Us:
A leading OEM firm specialising in providing innovative automated machines are currently requiring a highly skilled Contract Design Engineer to join our team for a minimum of 3 months to assist with a DEFRA, FGT quotation project. This role offers an immediate start and the opportunity to work on challenging projects in a dynamic environment.
Job Description:
As a Contract Design Engineer, you will be responsible for:
Designing and detailing using Inventor Software.
Producing step files, production drawings, and Bills of Materials (BOMs).
Generating fabrication drawings, including support steelwork, for quotation purposes.
Creating General Arrangements/Layouts.
Conducting stress, loads, and FEA calculations.
Utilising structural or architectural experience for negotiating building drawings.
Conducting site visits with the possibility of overnight stays.
Requirements:
Solid background and experience with Inventor Software.
Proven experience in producing production drawings, fabrication drawings, and BOMs.
Proficiency in stress, loads, and FEA calculations.
Structural or architectural experience is necessary.
Willingness to conduct site visits and potentially stay overnight.
Ability to work both in an office environment and remotely as needed
Benefits:
Competitive hourly rate (£35-£40 per hour).
Immediate start opportunity.
Potential for extension beyond initial 3 months.
Flexibility to work remotely on occasion after initial office-based period.
If you are a talented Contract Design Engineer with a solid background in design and engineering, and you're ready to take on a challenging project....Read more...
Are you a creative individual with a passion for design? Looking to further your career in graphic design? If so, join a dynamic team in an award winning, expanding organisation that offers flexibility of both full-time and part-time hours.Responsibilities:
Supporting the main designer in product design and website image management for Branded productsCreating designs for packaging and new product rangesEditing images for website listings and picture tutorials. Ensuring images on websites are updated and visually appealingPreparing and reformatting artworks for the website and social media channels Creating and maintaining point of sale and advertising materialsProduct development and liaising with manufacturers
To be successful in the Graphic Designer role, you must have:
Proven experience in graphic designProficiency with Adobe Photoshop and IllustratorStrong artistic eye for design and attention to detailAbility to work independently and as part of a teamExcellent communication and time management skills
What’s On Offer:
Competitive salary depending on experience – IRO £14 per hour plus benefits Permanent job opportunity offering job security & stability Both full and part time hours available for the right candidate. Typically Monday to Friday, 9am - 5pm Positive and collaborative working environment from offices in Ruthin Supportive team culture that values your contributions
If you are passionate about design and ready to take on new challenges, we would love to hear from you!....Read more...
Mechanical Design Engineer
Salary up to £50k (DOE)
As a member of the engineering team, The successful Mechanical Design Engineer will be joining a small but highly skilled R&D team where they will be working to progress the company's hardware products. This will entail both developing new products and reforming and improving the existing product range. Your main responsibilities will be
Key Responsibilities
- Creating new products and solutions to meet commercial requirements.
- Reimagining existing products, increasing functionality and potential applications.
- Redesigning products to deliver better performance and to improve manufacturability.
- Cost-engineering of existing products.
- Implementing and maintaining a repository of designs.
- Ensuring correct change-control procedures are adhered to.
- Supporting the production engineers in the development of rigs and processes, where required.
- Ensure all investigations and technical decisions are planned and documented effectively.
- Ensure the delivery of projects to the required timelines.
- Provide regular reports on progress and technical matters to stakeholders.
- Provide technical expertise to other areas of the business as required.
The Right Person
The successful Mechanical Design Engineer will be developing complex measurement instruments deployed in difficult environments so a background in sensors or ingress protection would be beneficial as well as experience in the following areas:
- Masters degree or equivalent in Mechanical or Electronic Engineering, or similar.
- 4+ years industry experience.
- Mechanical design.
- Strong 3D CAD skills (e.g. SolidEdge)
- Cost-engineering.
- Design-for-manufacture.
- Design for ingress protection (e.g. IP68).
- Development from prototype through to manufacture.
- Data analysis and strong numerical skills.
- Technical writing, processes and documentation.
- Problem solving.
- Change control and repository management.
The following skills would be beneficial to a good candidate, but are not essential to the role:
- Assembly and fabrication (e.g. for prototypes).
- Experience in working with electronics.
- Fault-finding electronics and sensors.
- Low power applications.
- BoM creation and obsolescence.
- Sensor calibration and test automation.
- Rapid prototyping.
- Project management.
Interested? Here are your three options
1. This is the job for me, I meet all the requirements Call now and lets talk through your experience. Ask for Jon Webster on between 8.30am 5.30pm
2. I think Im right for this position, but Im not sure about some of the detail Click apply now so I can read your CV and come back to you.
3. Im interested but need to know more about what this job can offer me email jon@precisionrecruitment.co.uk with your CV and questions and I will reply with more detail.
Precision are committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system.
PPTP....Read more...
Are you a Manufacturing Engineer - Electronic looking for a new position in Middlesex?
My client is a medium size company who design and manufacture a variety of fire safety systems and equipment to help prevent the spread of fire. My client has been the winner of numerous international awards for their work and are now looking for an experienced Manufacturing Engineer - Electronics to join the team.
The ideal candidate will have a strong background in Electronics, ideally someone who has experience with fault find down to component level and electronic assembly. This role will also involve getting hands on with the mechanical assembly. Any experience with PCB Layout design and using Altium is desirable but not essential.
This Manufacturing Engineer - Electronics based in Middlesex will have a blend of the following Skills and Experience:
- Drawing up detailed drawings, schematics and models using computer design software such as Altium
- Designing and building electronic components and circuits for use in products
- Design of R&D and production test setups/jigs
- Excellent soldering, mechanical assembly and practical skills
- Experience in manufacturing/engineering work
- Continuous Improvement
To apply for this Manufacturing Engineer- Electronic role based in Middlesex please call Ben Clarke on 01582 878841 or 07961 158760 TODAY or send your CV to blongden@RedlineGroup.Com....Read more...
Are you a professional in Electronics Design seeking your next opportunity? Would you like to work for a global leader offering a diverse international product portfolio driven by cutting-edge innovations?Insignis Talent is working with a leading Defense company who is actively seeking Electronic Design Engineers to strengthen their team due to increased workload.Positions are available for engineers at various career levels, catering to diverse interests such as detailed circuit design, sub-system integration, and leadership in technical project delivery. As a member of the Electronics Engineering team, your responsibilities will span board-level electronic design, prototyping, functional testing, and sub-system integration.Opportunities also exist to contribute to research and continuous improvement initiatives aimed at advancing Electronic Engineering capabilities.We seek engineers at different career stages specializing in one or more of the following areas:
Analog
Digital
Power
FPGA
Firmware
RF
EMC
Technical Leadership / Project Delivery
If you're ready to join a dynamic team on an exciting journey where your expertise and innovative thinking are highly valued, apply now to help shape the future of Defense engineering.Note: Due to the confidential nature of the work, successful candidates must pass a security clearance check.....Read more...
Are you a professional in Electronics Design seeking your next opportunity? Would you like to work for a global leader offering a diverse international product portfolio driven by cutting-edge innovations?Insignis Talent is working with a leading Defense company who is actively seeking Electronic Design Engineers to strengthen their team due to increased workload.Positions are available for engineers at various career levels, catering to diverse interests such as detailed circuit design, sub-system integration, and leadership in technical project delivery. As a member of the Electronics Engineering team, your responsibilities will span board-level electronic design, prototyping, functional testing, and sub-system integration.Opportunities also exist to contribute to research and continuous improvement initiatives aimed at advancing Electronic Engineering capabilities.We seek engineers at different career stages specializing in one or more of the following areas:
Analog
Digital
Power
FPGA
Firmware
RF
EMC
Technical Leadership / Project Delivery
If you're ready to join a dynamic team on an exciting journey where your expertise and innovative thinking are highly valued, apply now to help shape the future of Defense engineering.Note: Due to the confidential nature of the work, successful candidates must pass a security clearance check....Read more...
Are you a professional in Electronics Design seeking your next opportunity? Would you like to work for a global leader offering a diverse international product portfolio driven by cutting-edge innovations?Insignis Talent is working with a leading Defense company who is actively seeking Electronic Design Engineers to strengthen their team due to increased workload.Positions are available for engineers at various career levels, catering to diverse interests such as detailed circuit design, sub-system integration, and leadership in technical project delivery. As a member of the Electronics Engineering team, your responsibilities will span board-level electronic design, prototyping, functional testing, and sub-system integration.Opportunities also exist to contribute to research and continuous improvement initiatives aimed at advancing Electronic Engineering capabilities.We seek engineers at different career stages specializing in one or more of the following areas:
Analog
Digital
Power
FPGA
Firmware
RF
EMC
Technical Leadership / Project Delivery
If you're ready to join a dynamic team on an exciting journey where your expertise and innovative thinking are highly valued, apply now to help shape the future of Defense engineering.Note: Due to the confidential nature of the work, successful candidates must pass a security clearance check....Read more...
We are seeking creative individuals who are passionate about lighting design to join the team. As a Lighting Designer will work closely with Clients, Architects, and Designers to ensure the seamless integration of lighting design into the overall scheme.
Key Responsibilities:
Develop unique and captivating lighting concepts that enhance the aesthetics, mood, and functionality of spaces.
Consider factors such as energy efficiency, sustainability, and safety in lighting designs.
Utilise a deep understanding of lighting technologies, equipment, and software tools to effectively communicate and collaborate with project stakeholders.
Provide design input throughout the project lifecycle, from concept to completion.
Proficiency in Adobe Creative Suite, AutoCAD, and Microsoft Office.
Good visualisation skills, including hand sketching and rendering.
Qualifications:
Proficiency in Adobe Creative Suite, AutoCAD, and Microsoft Office.
Good visualisation skills, including hand sketching and rendering.
Understanding of Revit, Sketch-up, 3DS Max, and V-Ray (beneficial but not essential)....Read more...
We are seeking creative individuals who are passionate about lighting design to join the team. As a Lighting Designer will work closely with Clients, Architects, and Designers to ensure the seamless integration of lighting design into the overall scheme.
Key Responsibilities:
Develop unique and captivating lighting concepts that enhance the aesthetics, mood, and functionality of spaces.
Consider factors such as energy efficiency, sustainability, and safety in lighting designs.
Utilise a deep understanding of lighting technologies, equipment, and software tools to effectively communicate and collaborate with project stakeholders.
Provide design input throughout the project lifecycle, from concept to completion.
Proficiency in Adobe Creative Suite, AutoCAD, and Microsoft Office.
Good visualisation skills, including hand sketching and rendering.
Qualifications:
Proficiency in Adobe Creative Suite, AutoCAD, and Microsoft Office.
Good visualisation skills, including hand sketching and rendering.
Understanding of Revit, Sketch-up, 3DS Max, and V-Ray (beneficial but not essential)....Read more...
Junior Graphic Designer
Location: Warrington
Base Salary up to: £27k to £34k DOE
Full time: Permanent
Hybrid: 3 days a week onsite 2 days working from home
As a member of the Channels team, the Junior Graphic Designer will report to the Senior Graphic Designer. In this role, you'll be tasked with producing a range of assets and projects for both internal and external audiences. Creativity is key as you'll be expected to generate fresh ideas and develop innovative solutions to meet the evolving needs of the business. Ensuring brand consistency across all materials will be a primary focus in your day-to-day activities. The successful candidate will have Adobe Creative and PowerPoint.
The Role:
Collaborate in crafting visually captivating designs for various media platforms such as print and digital, encompassing marketing materials, social media graphics, website elements, and digital ads.
Adhere to established brand guidelines and tone of voice, ensuring the professional representation of each business unit through asset development.
Engage with internal stakeholders to ensure the brand-conscious delivery of their core messages to both internal and external audiences.
Oversee the creation and delivery of PowerPoint assets supporting Internal Communications and Academy (L&D) functions.
Participate in regular reviews of all communication channels alongside the Senior Graphic Designer to maintain alignment with brand guidelines.
Provide support to the Senior Graphic Designer across diverse design tasks as needed.
Proactively monitor design quality, accuracy, and consistency to bolster brand recognition.
Aid in designing master files, templates, specifications, mark-ups, and proofing processes.
Collaborate with the Senior Graphic Designer in prioritising ongoing projects, adhering to deadlines, and maintaining effective stakeholder communication.
Stay abreast of the latest design tools, techniques, and best practices to enhance skill sets and productivity.
Facilitate colleagues' independent and consistent work by utilising in-house templates.
Manage the naming, design, and archiving of all assets in accordance with agreed naming structures and internal organisation standards.
Who are we looking for?
Proficient in design, particularly in Microsoft PowerPoint, Word, and Excel, complemented by expertise in Adobe Creative Suite (Photoshop, Illustrator, InDesign).
Strong communication skills, fostering relationships with internal stakeholders and external agencies, demonstrating empathy towards diverse audiences.
Eagerness to gain marketing design experience, crafting content for both B2C and B2B audiences within specified parameters.
Committed to continuous professional development, fostering a collaborative team spirit and celebrating collective achievements.
Detail-oriented and analytical, with a flexible and efficient work approach.
Essential skills:
Possession of a relevant degree or qualifications in design, accompanied by a notable portfolio showcasing design flair, strategic thinking, and technical prowess across various print and digital endeavors.
Proven graphic design experience, including proficiency in Adobe CC Software such as Illustrator, Photoshop, and InDesign.
Extensive familiarity with PowerPoint and adeptness in utilising templates to maintain design coherence across presentations and other documents.
Relevant experience as a Graphic Designer and meticulous attention to detail, with a proven ability to adhere to deadlines and effectively manage delivery expectations with support from the Senior Designer.
Desirable Skills:
Basic proficiency in editing photography and video content.
Familiarity with operating a camera, coupled with an interest or awareness in motion graphics (training provided).
Previous experience in client interaction and agency relationship management.
Fundamental understanding of MailChimp, Salesforce, and Pardot (training available).
Familiarity with Craft or similar CMS programs (training provided).
Knowledge of Jira Software (training available).
Don’t meet every single requirement? Studies have shown that women and people of colour are less likely to apply to jobs unless they meet every single qualification. At We Are Adam, we are dedicated to building a diverse, inclusive and authentic workplace, so if you’re excited about this role but your past experience doesn’t align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles!
We are more than happy to discuss any reasonable adjustments that you may require.
Interested? Please apply now.
We look forward to hearing from you!....Read more...
Senior Software Engineer; Medical Devices; Product Design;
Software Engineers will be involved in collaborating with internal departments such as Sensors to design and implement software components for both new and existing advanced in-house systems, aimed at enhancing manufacturing efficiency and quality control. This involves troubleshooting and resolving existing technical issues, as well as innovating new features.
Writing, technical software documentation (e.g. user guides, design documents).
Keeping up to date with the latest developments in relevant technologies and methodologies.
Software Engineers will have some of the following experience3+ years of experience designing medium-large scale applications involving hardware integration in LabVIEW.Certified LabVIEW Architect (CLA). 1+ years of experience working within a scrum framework as part of an agile implementation.1+ years of experience working with source code control, specifically Git.Experience working with motion control systems.Experience working with National Instruments (NI) hardware.Working within a lead....Read more...
Draughtsman with a background in Advance Steel is required for an architectural metalwork company in KentThe Role: • Producing GA drawings in 2D & 3D. • Detailing & fabrication drawings. • Liaising with structural engineers and architects. • Occasional site visits for measurements and customer interface. The Candidate: • Strong knowledge of Advanced Steel • Minimum 4 years' experience in Structural steelwork architectural metalwork, to include balconies canopies balustrade systems. • Demonstrate an understanding of the work they are producing. • Issuing drawings, material, cutting, component lists etc. • Logging revisions on design trackers. • Informing the design manager / commercial team of variations to the design. • Good general IT skills. • Good customer service skills.Please apply with your most up to date CV and you will be contacted....Read more...
R&D Mechanical Design Engineer Reporting into the Engineering Manager where you will spearhead the development of mechanical technologies and new products. From initial research to concept design, testing, and production roll-out, you'll provide technical support and practical guidance. Your role extends to implementing new methods and products across departments while ensuring adherence to quality and safety standards.
Duties and Responsibilities:-
Lead the creation of new product developments and technological advancements.
Manage R&D, Design, Manufacturing, and Testing of complex, high-precision components.
Ensure compliance with industry, safety, and business standards.
Enhance existing standard products through continuous development.
Maintain engineering records and documentation.
Enforce adherence to procedures without exception.
Collaborate with managers and team members to drive continuous improvement initiatives.
Support cross-functional departments in achieving objectives.
Foster teamwork and cooperation across all levels.
Communicate clearly and concisely to ensure mutual understanding.
Adapt flexibly to meet evolving business needs.
Skills & Qualifications:-
Proficiency in SolidWorks is essential; AutoCAD experience preferred.
Solid grasp of Solid Works for 3D modeling and AutoCAD for 2D drafting.
Ability to work independently or collaboratively with minimal supervision.
Please apply to this exciting opportunity to contribute to their innovative team and make a meaningful impact in the field of bespoke equipment design and technology advancement.....Read more...
An exciting opportunity has arisen for a Production Engineer to join my client, based in Kent.
The Production Engineer, based in Kent will report into the Operations Manager and will be responsible for coordinating production engineering processes from the final design phase to full production release. Other responsibilities will include:
-Responsibility for managing the standards, methods and procedures for the design, modification, and maintenance of manufacturing equipment (Jigs / Fixtures / Tooling) and processes.
-Developing and delivering production plans, build documentation and route cards for a variety of engineering projects from final design and into series production.
-Contributing to the development of the Operations Department strategy.
-Coordinating cross-functional departmental activities to resolve manufacturing issues during day to day operation’s activity.
-Developing best practices to improve production capacity, quality and reliability.
-Supporting and contributing to continuous improvement initiatives. Support New Product Introduction, NPI and Design for Manufacture, DFM activities.
The successful Production Engineer, based in Kent will be ideally degree educated in an engineering related discipline or with a recognised engineering apprenticeship within an electro-optical manufacturing environment.
***This client operates a 9 day fortnight (every other Friday is a non-working day)***
APPLY NOW! For the Production Engineer job, based in Kent, by sending your CV to cgilbert@redlinegroup.Com or for any other Production roles please call on 01582 878807.....Read more...
Are you a looking for a new position in the North of England?
My client has been established for over 40 years and has an enviable reputation as a successful electronics OEM business and design consultancy. They design a variety of PCBs, Box builds and more for clients all over the world.
The ideal Sales Engineer will understand and communicate the value of the company's manufacturing & engineering services to clients. The ideal candidate will have proven experience in technical sales, preferably in electronics or manufacturing sector.
The Sales Engineer based in the North of England will have a blend of the following skills and experience:
Proven experience in technical sales, preferably in the electronics engineering or manufacturing sector.
Strong understanding of electronics components, systems, and design principles.
Excellent communication and presentation skills.
Self-motivated, proactive, and able to work independently.
Demonstrated ability to meet and exceed sales targets.
Customer Relationship Management: Cultivate and maintain strong relationships with existing and potential clients, understanding their needs and providing tailored solutions.
Remote Collaboration: Work effectively in a remote environment, collaborating with cross-functional teams to ensure seamless communication and project execution.
To apply for this Product Design Engineer based in the North of England, please call Charlie Gilbert on 01582 878 807 or 07961 158 782 TODAY or send your CV to CGilbert@RedlineGroup.Com....Read more...
A leading global Chemical Manufacturer are looking for an experienced Senior Project Engineer to join their team on one of their sites in the Blackpool Area. They are paying a salary of up to £68,900 per annum.
This senior position is supported by a fantastic benefits package that includes;
Salary Up to £68,900
Annual bonus
14% employer pension contribution
Private Healthcare
Life Insurance
28 days holidays
As the Senior Project Engineer, you will be part of one of the world’s largest chemical manufacturers, who strive to bring transformational and sustainable solutions which address global material obstacles, every day, within a range of industries from Chemical, Engineering, Automotive and Aviation, to Medical and Electronics – creating smarter and more sustainable manufacturing solutions.
Responsibilities of the Senior Project Engineer:
Own and manage whole assignments with a worth of up to £1 million.
Manage the detail design to meet the required plan, efficiently use contracted design resource, effectively review design documents and design deliverables suitable for manufacture and construction.
You will be required to complete technical review of vendor quotations, and clear recommendations on quotation analysis sheets.
It will be your responsibility to drive the EPC programme, whilst identifying potential cost slippages and implement effective corrective actions, on time.
Assist with the conceptual specification, design and cost estimation to sanction quality standard and monitor cost items under the job holders control, ensuring orders are within budget.
You will be responsible for up to £2 million per year of capital expenditure.
To be successful in this role as a Senior Project Engineer you will need;
An Engineering Degree (preferably Chemical)
Experience of working and delivering projects in chemical, utility plant and manufacturing environments
A proven record of delivering senior projects from beginning to end including working with; budgets, design, materials, timescale and other responsibilities
To have an understanding of hazardous areas classification
Chartership is desired
To apply for the role of Senior Project Engineer, please apply direct below.
....Read more...
Power Systems EngineerInsignis Talent are currently working with a multi-national Maritime Defence company, who’s broad portfolio of capabilities is operational on UK naval fleets and allied navies worldwide. They specialise in the design, development and production of the key elements of mission critical, intelligent and highly regulated solutions across surface, sub-surface and unmanned platforms.Currently, they're in search of a Power Engineer to permanently join their team. Based in Staffordshire, your role will involve supporting the design, manufacturing, and distribution of innovative, high-power static converters and motors. As part of this team, you'll be responsible for delivering durable and cost-efficient power electronic solutions for various specialized applications, including submarine power systems, high-integrity power supplies, naval propulsion, and specialized industrial drive systems. You'll engage in all stages of the engineering process, from conceptualization to verifying and validating production systems.Key Responsibilities:
Undertake diverse engineering tasks spanning from project inception to completion
Plan and execute engineering assignments, requiring judgment in selecting and adapting designs to meet specified requirements
Ensure the technical performance of the product meets expectations
Collaborate closely with senior team members to plan and coordinate projects
Coordinate technical activities within the team
Serve as the primary technical liaison with clients
Contribute to project meetings and deliver comprehensive technical and progress reports
Stay updated on advancements in the field by attending seminars and reviewing technical literature
Support other business initiatives such as process improvement endeavours
Qualifications and Experience:
Hold a degree in electrical engineering or a related field, or equivalent qualification
Proficiency in design/simulation tools like MATLAB and Simulink
Demonstrated expertise in power electronics
Track record of successful product design and testing within a relevant context
Broad understanding of other engineering domains (e.g., systems, mechanical, motors, etc.)
Familiarity with best practices in design lifecycle processes, including gated design phases and design reviews
Ability to effectively engage with customers and deliver presentations
Experience in live testing of low-voltage electronic or electrical equipment (i.e., <1000V)
Important information: Roles require security clearance without restrictions. The successful candidate must be able to obtain this....Read more...
Systems Engineer – Medical Devices Diagnostics – London
A start-up Medical Devices company, based in Central London, is currently hiring for a Systems Engineer to join them and help accelerate the design, development, building, and testing of a novel Diagnostics technology, working to ISO 13485 Medical Devices standards.
Due to the early stage of this organisation, there is still the potential of acquiring equity. Meaning your success will have a direct impact on your future.
Your focus will be accelerating the design, development, building and testing of the hardware of this new Diagnostics Medical Device, working alongside some excellent Medical Devices Physicists, Scientists, Electronics Engineers, and Design Engineers.
This Medical Devices organisation is looking for a Systems Engineer who has worked on hardware development of a Medical Devices, Biotech System or Life Sciences Technology that have included mechatronics elements.
Apart from hardware development experience for systems design, Python programming, and design for manufacturing, providing systems documentation and BoM will also be important.
Due to the size of this company, you will be exposure to other areas of the business, including third-party meetings and attending Medical Devices and Science conferences and trade shows. Due to this, it would be ideal if you have worked for a start-up or scale-up Medical Devices company previously or worked for a Medical Devices/Scientific Design Consultancy and know what it’s like to wear multiple hats when needed.
It would be highly advantageous if you have also worked on microfluidic systems in the past, products that have had an element of chemistry, biochemistry, and medical products.
It is expected that you would hold a degree and masters in a related Medical Devices, Biomedical Engineering, Mechanical Engineering, Design Engineering, Electronics Engineering, or another relevant scientific subject.
Apart from equity, you will also be rewarded with an excellent starting salary, pension, and future career development as the company grows while also working in an interesting field on a product that could help a lot of people.
As this is an exciting role, joining a start-up company right at the beginning of their story, I’m expecting a lot of interest in the role. So, if you are interested, please apply straight away or risk missing out to someone else.
Due to the anticipated level of interest in this role, we are considering candidates with varying levels of experience, provided they process the right attitude. Therefore, if you are interested, we recommend submitting an application promptly to avoid missing out. Once the company identifies the right candidate, they will extend an offer, so we do not expect this role to remain open for long.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Science recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you.....Read more...
