A Berthon Shipwright apprentice will learn how to carry out boatbuilding repairs and fit-out onboard private luxury sail/ motor yachts and small commercial vessels, including Royal Navy vessels.
You will learn how to carry out complex internal and external repairs on modern composite yachts.
You will learn traditional wooden boatbuilding skills (frames, beams and planking), how to remove and fit teak decks or decking systems, how to modify engine beds, fit bulkheads and floors, install bow and stern thruster tunnels, make through hull penetrations and install skin fittings and make and fit head linings and interior joinery.
What you will do in your working day:
Composite moulds
Complex composite hull repairs
Stern tubes/ engine beds/ line-ups
Keels and rudders
Teak decks
Deck fittings
Traditional wooden boatbuilding
Interior joinery
Fitting interior and exterior assemblies and components
Varnishing and finishing
Sea Trials
Training:Boatbuilder Level 3 Apprenticeship Standard:
https://www.instituteforapprenticeships.org/apprenticeship-standards/st0059-v1-2Training Outcome:
Berthon retains the overwhelming majority of its apprentice graduates
On successful completion of the apprenticeship the offer of a permanent skilled contract at skilled Level 1 with a current salary of £42099
Progression through 6 skilled levels and further training opportunities
Employer Description:Berthon has a long history of training apprentices and also supporting the development of apprenticeships across the industry. You will get the opportunity to benefit from a national and international award-winning apprenticeship programme that will aid your progression. As an apprentice, you will ‘Earn as you Learn’ with competitive rates of pay as well as a national dividend and a Berthon pension (both subject to qualification).Working Hours :Monday to Friday, days and times to be discussed at interview.Skills: Attention to detail,Commitment,Initiative,Team working....Read more...
DENTIST REQUIRED FOR DUDLEYWe’re looking for a Dentist to join this established mainly NHS practice in Dudley• To work Full time or Part time• Starting ASAP UDA rate of £13.50 per UDA starting rate, dependent on experience • Negotiable UDA contract • 50% Private remuneration and lab bills splitPractice information4 surgeries (not all 4 surgeries being usedHygienists and Therapist support available All digital, Rotary endo, Shire softwareParking on siteThey do a lot of Orthodontic treatment so any experience in this would be an advantage, they also offer cosmetic treatments, composite bonding & aesthetic dentistry....Read more...
LOCUM DENTIST REQUIRED FOR DUDLEYWe’re looking for a Locum Dentist to join this established mainly NHS practice in Dudley• To work Full time or Part time• Starting ASAP, ongoing locum• £450 day rate for 30 UDA's, offering £12 per UDA for overachieving the target and £12 per UDA deduction for underachieving the UDA target • 50% Private remuneration and lab bills splitPractice information4 surgeries (not all 4 surgeries being usedHygienists and Therapist support availableAll digital, Rotary endo, Shire softwareParking on siteThey do a lot of Orthodontic treatment so any experience in this would be an advantage, they also offer cosmetic treatments, composite bonding & aesthetic dentistry....Read more...
DENTAL HYGIENIST REQUIRED FOR DUDLEYWe’re looking for a Dental Hygienist to join this established mainly NHS practice in Dudley• To work Tuesdays• Starting ASAP• Options for the working hours are 9am- 6pm or 9:30am- 5:30pm• Starting rate at £28ph+, this can be discussed and increased depending on experience Nursing support provided, 20-30 minute appointments depending on the treatmentThe role is to see Private patients only, No direct accessThey will consider candidates with no previous experience but all candidates must be qualified from the UK Practice information4 surgeries (not all 4 surgeries being usedAll digital, Rotary endo, Shire softwareParking on siteThey do a lot of Orthodontic treatment at the practice, they also offer cosmetic treatments, composite bonding & aesthetic dentistry....Read more...
Duties & Responsibilities:
Support the manufacture, assembly, and finishing of composite components and tooling
Assist with lay-up, vacuum bagging, curing, trimming, and inspection processes
Operate workshop machinery and equipment safely and effectively
Work with advanced composite materials and associated consumables
Support automation and advanced manufacturing activities within the workshop
Interpret engineering drawings, specifications, and work instructions
Carry out quality checks and maintain accurate production records
Complete a Level 3 qualification with Weston College and apply learning on site
Training:
3-year 3-month scheme which combines on the job training and classroom learning
1st year is spent mainly at college except for when you’ll come to NCC to put what you’ve learnt at college into practice and learn even more
2nd and 3rd years are spent mainly at NCC with one day a week at college
Qualification - NVQ 2&3 and BTEC Engineering AwardYou will rotate around different departments and sectors within NCC workshop including automation
Training Outcome:
This is a fixed-term apprenticeship contract lasting 3 years and 3 months, including the EPA period
Upon successful completion, technician vacancies may be available, and apprentices can apply and go through the standard interview process
Career progression is dependent on individual performance and business needs
Opportunities may include Technician or Advanced Technician roles, with some apprentices progressing into Mechanical Engineering positions. This is on a case-by-case basis
Employer Description:Who are NCC?NCC is a world-leading innovation organisation that turns cutting-edge research and technology into industrial impact.
What we doWe help manufacturers take on bigger challenges - whether that’s building cleaner aircraft, scaling up offshore wind, or strengthening the UK’s supply chains. We’re here to deliver practical outcomes, not prototypes that sit on shelves.
Who we work withWe work across 16 sectors, from defence and energy to infrastructure and space. Some projects are with global tier 1s, others with small UK firms solving one specific problem - the works always varied, and always real.
What it’s like hereWe’re not a startup. We’re not a corporate. We’re a national centre with the kit, time and people to do the job properly. The teams are focused, the thinking is sharp, and you’ll be trusted to get on with it.
Why this job mattersThis role isn’t just internal support - it’s part of how we deliver nationally important work. If we do our job right, the UK’s manufacturers can do theirs better.Working Hours :Monday to Friday, with occasional weekend work, only on agreement.
Flexible working hours: 7.4 hours per day, including a 45-minute unpaid lunch break. Shifts to be confirmed.Skills: Communication skills,Team working,Willingness to learn,Enthusiasm,Commitment to apprenticeship....Read more...
DENTAL ASSOCIATE - PONTEFRACTA new opportunity has become available for a Dental Associate to join an independent practice located in Pontefract, West YorkshireThe role is to take over an established list of NHS and private, they have a small UDA contract and have recently started an independent plan, which is consistently growing•Start date: ASAP•Days available: Mondays, Tuesdays and Fridays •Working hours: 9am - 5pm (Lunch between 1-2)•UDA rate: £16 per UDA•UDA target: TBC •PVT / Lab split: 50/50Practice information:This is a independent mixed practice, currently with 2 dental surgeries. It is computerised using Dentally Software with Digital x-rays. Air conditioning, windows. Shadowing Composite bonding and Endo specialists (Manchester based) Discount courses. The practice are introducing an independent plan in the very near future. Location information:Big car park with free parking, Leeds and Sheffield train lines nearby The successful candidate must have right to work in the UK as sponsorship is not available for this position.All candidates must fully qualified, GDC registered with an active performer number and UK experience.....Read more...
This is a hands-on, physically demanding, team-focused position, ideal for individuals seeking practical, labour-intensive work within a supportive manufacturing environment. Throughout your training, you will develop strong foundational composite skills and excellent team working abilities across multiple trades. Working alongside experienced professionals, you’ll help build vessels that meet a world class standard for quality and performance.Training:Lean Manufacturing Operative (Composites) Apprenticeship Standard https://www.instituteforapprenticeships.org/apprenticeship-standards/st0420-v1-2Training Outcome:The opportunity for a permanent contract on completion of your apprenticeship. Promotion opportunities and further education options also exist on the completion of training.Employer Description:Sunseeker International is a global icon in the manufacture of luxury motor yachts, building market leading products since 1967.
Based and manufactured in Poole on the south coast of England, Sunseeker is one of Dorset’s largest private employers and is represented on every continent by a global network of distributors. Never settling for second best, it’s this spirit of excellence that has driven Sunseeker to its leading position in the marine industry today.Working Hours :Working hours: 7.00am -3.30pm. College hours: 8.30am to 5.00pm (block release - full week of study).Skills: Positive attitude,Practical skills,Team working....Read more...
Administering the time and attendance system
Recording absences and managing holiday bookings
Employment administration, candidate referencing, preparing induction packs, and managing training for staff
Maintaining employee benefits records
Supporting the HR team with projects
Issuing of staff uniform and managing uniform stock levels
Any other ad-hoc administration duties.
Training Outcome:There is the possibility to progress onto a HR CIPD qualification.Employer Description:Progressive Technology Ltd is a rapidly expanding Engineering Business based in Newbury Berkshire. Progressive Technology Group of companies has grown to be a leading supplier of CNC machined, 3D printed and composite components, an award winning, first choice supplier to motorsport and other industries, we have a reputation for innovation, development, and rapid product turnaround.Working Hours :Monday to Friday 8am – 4.30pm, 40 hours per week.
If over the age of 18, 8am to 5pm, 42.5 hours per week
Please note this role is fully officed-basedSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Team working,Creative,Initiative,Non judgemental,Patience,Professional and confidential,Reliable....Read more...
This is a hands-on, physically demanding, team-focused position, ideal for individuals seeking practical, labour-intensive work within a supportive manufacturing environment
Throughout your training, you will develop strong foundational composite skills and excellent team working abilities across multiple trades
Working alongside experienced professionals, you’ll help build vessels that meet a world class standard for quality and performance
Training:Lean Manufacturing Operative (Composites) Apprenticeship Standard:
https://www.instituteforapprenticeships.org/apprenticeship-standards/st0420-v1-2Training Outcome:
The opportunity for a permanent contract on completion of your apprenticeship
Promotion opportunities and further education options also exist on the completion of training
Employer Description:Sunseeker International is a global icon in the manufacture of luxury motor yachts, building market leading products since 1967.
Based and manufactured in Poole on the south coast of England, Sunseeker is one of Dorset’s largest private employers and is represented on every continent by a global network of distributors. Never settling for second best, it’s this spirit of excellence that has driven Sunseeker to its leading position in the marine industry today.Working Hours :Working hours: 7am-3.30pm / College hours: 8.30am to 5pm (block release - full week of study)Skills: Positive Attitude,Practical skills,Team working....Read more...
Serving as the first point of contact for IT Support within the organisation
Installing, configuring, and maintaining software and hardware components of the computer and network systems
Diagnosing and troubleshooting software and hardware issues
Repairing and replacing damaged computer and network components
Supporting employees whenever they encounter challenges with computers and network devices.
Maintaining and updating technical documentation regularly
Testing new hardware and software before full-scale installation
Maintaining asset inventory
Training Outcome:
Potential to progress
Employer Description:Progressive Technology Ltd is a rapidly expanding Engineering Business based in Newbury Berkshire. Progressive Technology Group of companies has grown to be a leading supplier of CNC machined, 3D printed and composite components, an award winning, first choice supplier to motorsport and other industries, we have a reputation for innovation, development, and rapid product turnaround.Working Hours :Monday to Friday 8am - 4.30pm, 40 hours per week.
If over the age of 18, 8am - 5pm, 42.5 hours per week.
Please note this role is fully officed-basedSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Reliable,Professional and Confidential....Read more...
DENTAL ASSOCIATE - CHESTERFIELD A new opportunity has become available for a well-motivated associate to join a busy independently owned Dental Practice in Chesterfield, Derbyshire. •Full Time Position - Monday to Friday 9am-5pm.•2.5 days delivering access sessions at a pay rate of £400 per day.•2.5 days delivering 2500-2750 UDAs plus potential for private work.•Competitive UDA rate from £13 upwards depending on experience.•Good Private and Independent Income at 55%•An established well-maintained patient list•Existing DFT training practice over the last 6 yearsSponsorship provided (pro-rata) by the practice for the successful candidate to attend Invisalign course to provide this service on a private only basis to patients and further learning opportunities. (Terms apply)Location: Staveley/Chesterfield with free staff parking available at the rear of the practice.Our systems are fully computerised, and we currently offer the following services:•Digital X-rays•Computerised (SOE)•Rotary Endo-Wave one•All the latest dental materials•Refurbished surgeries with air-conditioning•Treatment provided include general and cosmetic dentistry, tooth whitening, Invisalign, composite bonding.•Full Team Support.•Position suitable after completion of DFT training with full support from existing ESs of the practice, happy to continue mentoring newly qualified dentists transitioning into associate role.All candidates must fully qualified, GDC registered with an active performer number and UK experience.....Read more...
Preparation and detailed masking of products prior to finishing
Batching of jobs/orders
Finishing/packing of products using protective films
Organising jobs, reading off job sheets to identify specification
To be aware of business continuity processes via Line Manager.
Organising products
Detailed masking of products
Preparation using specialist cleaners
Mixing of specialist stains & paints
Application of protective films
Stripping and re-fabrication of uPVC window frames
Packaging of finished products
Disassembly and cleaning of spraying equipment
Training:Supply Chain Warehouse Operative Level 2.
The delivery of this apprenticeship will be a blend of both Online and Workplace assessment with the assessor approximately every 4 - 6 weeks.Training Outcome:On completion of the apprenticeship there will be potential to offer a permanent role in which further benefits will become available.Employer Description:Yorkshire Specialist Coatings Ltd are a specialist paint applicator based in Carlton, Barnsley who offer spray painting services to uPVC window manufacturers, uPVC stockists, Glass manufacturers, joinery
manufacturers and GRP composite door manufacturers.
We specialise in the application of specialist paints for building products such as uPVC, plastics, glass
and metals, working predominantly with other businesses throughout the north of EnglandWorking Hours :9.00am - 5.00 pm with 45-minutes unpaid lunch break - morning break 10.00am - 10.15am/afternoon break 3.00pm - 3.15pmSkills: Organisation skills,Team working,Eye for detail,Must have ambition and drive,Continually improve skills,Good communication skills....Read more...
ASSOCIATE DENTIST - DUMFRIESWe’re looking for an Associate Dentist to join this established mixed located practice located in Dumfries•Both full and part time can be considered •Welcome bonus of £10,000•Relocation incentive of £25,000 (T&C apply)•List size 3,000 | NHS/ Private mixPractice information:Fully digitalised clinic including iTero scanner, well established and experienced dental team. The practice offers: dental implants, Invisalign, composite bonding, advanced private restorative dentistry, facial aesthetics as well as general dentistry. You will join an excellent, experienced, and local dental team who offer first-rate dental care in a fully digitalised and modern clinic the heart of Dumfries.Location information:Located towards the Scottish borders Dumfries is an area that boasts breath-taking landscapes, a rich history, and a warm community spirit. The region has something for everyone and is perfect for those who love the great outdoors due to the miles of stunning coastline, rolling hills and lush forests. Despite it’s rural setting, Dumfries is a vibrant cultural hub which hosts a range of festivals and events throughout the year.Benefiting from excellent transport links the region is easily accessible by road and rail, and the local airport offers flights to major UK cities meaning you can live in a peaceful, rural setting without sacrificing modern conveniences.Job Benefits: •Up to £15,000 contribution towards a Masters Degree (or equivalent) - (Subject to terms and conditions)•Mentorship from within our experienced teams and industry leaders in Dental Implants, Invisalign, Cosmetic Dentistry and Facial Aesthetics•10% reduction in MDDUS indemnity fee•Dentinal Tubules CPD membership•Continuous group CPD opportunities and annual CPD weekendAll suitable candidates must be fully qualified and GDC registered....Read more...
Train in multiple NDT methods (e.g. Ultrasonic, Radiographic & Phased Array
Assist with inspection of composite and metallic components
Support dimensional measurement using CMMs, laser trackers and 3D scanning systems
Contribute to research, validation and manufacturing development projects
Work alongside experienced Level 2 and Level 3 Engineers in a high-tech R&D setting
Training:Non-Destructive Technologies Technician Level 3.
The apprenticeship programme is designed to gain skills and technical expertise to become a certified NDT Operative in three NDT Methods. This includes health and safety training, 1-to-1 mentoring, seminars, practical work experience sessions, and on-the-job training.
The candidates will keep records of their learning and experience throughout the programme and create an improvement plan.
On successful completion of the apprenticeship scheme, further qualifications may be gained.
This is a unique opportunity to build dual expertise in NDT and metrology in one of the UK's leading innovation centres.Training Outcome:Following successful completion of Apprenticeship, appointment as Technician in NDT & Metrology Team. With further supported study, progression to Research Engineer and beyond is possible, along with qualification in additional NDT methods and subsequent Level 3 certification.Employer Description:NCC is an open access centre which helps businesses of all sizes bridge the gap between cutting edge innovation and industrial application, turning ideas into impact across the entireproduct life cycle. As a not-for-profit centre, we act as an extension of our customers' capabilities, providing access to world-class expertise, advanced facilities and collaborativeopportunities.Working Hours :Flexible start/finish times Monday - Friday, exact working hours TBC.Skills: Communication skills,Attention to detail,Problem solving skills,Analytical skills,Understanding of CAD....Read more...
To ensure that the raw materials delivered to the site fully meet the company's quality standards by following an incoming testing and pass-off procedure, ensuring products are approved and passed into stock in a timely manner through the company's computer system
Follow and maintain the Standard Operating Procedures for all processes employed within the Incoming Quality Testing System
To support the Manufacturing Quality function, carrying out process audits, product compliance testing and final dispatch quality sign off
Ensure the quality process / functional areas and laboratory testing equipment being used are fully maintained in line with ISO accredited standards
Reports quality performance utilising reports, visual standards uploading data onto the company systems
Training:
Training will take place at Middlesbrough College
One day a week day release
Training Outcome:Potential for progression onto a full-time role, depending on performance on the apprenticeship. Potential to work in other countries where the business has sites once qualified.Employer Description:Sicut Enterprises is a company that manufactures and supplies sustainable infrastructure products, primarily focusing on composite railway sleepers and bearers made from recycled plastic. They are known for their Network Rail-approved products and are actively involved in developing custom solutions for various track applications, including plain line, tunnels, bridges, and more. Sicut's products are designed to be sustainable, recyclable, and offer a longer lifespan than traditional materials like wood.Working Hours :Normal daily hours of work are 08:00 to 17:00, with a 60-minute unpaid lunch break each day.Skills: Communication skills,Attention to detail,Organisation skills,Analytical skills,Logical,Self-starter,Manual dexterity,Excellent computer skills,Ability to work safely,Reliable....Read more...
PRIVATE DENTIST - BISHOP AUCKLANDA new opportunity has become available for a Dentist to join a high-end, award winning fully private independent dental clinic, located in Bishop Auckland, County Durham*The practice recently passed their CQC inspection*•Start date: Flexible •To work ideally 3 days per week, any other weekday, 9am - 7.30pm (1 hour lunch between 1-2pm and 30 min evening break)Location information:Car parking available on side street. Around a 10 minute walk to Bishop Auckland train stationBenefits: •Take over a plan patient list •Fee per item model •Gross up to £12-£15k a month •Medit Scanner •Wireless X-Ray System •Wave 1 endo •Free use of hygienist with a slick reception team •Experienced dental nurses •Mentorship available by the principal dentist to build on your experience •Bur kits and air abrasion provided•Styleitaliano kits provided •Free use of practice SLR camera •Free internal hands on study days led by principal dentist, this includes rubber dam isolation, SLR camera set up, composite quad and anterior layering. Requirements:•At least 2 years post FD experience •Great communication and willingness to adapt •Motivated to learn and follow techniques for general dentistry taught by - styleitaliano workflow•Pathway for learning and courses attended which has also been implemented with evidence. •Ideally a clinical portfolio or cases to discussWe are an evidence based dental clinic with a positive patient base and team. We strive for excellence and we want a clinician that will go above and beyond to represent our brand and ethos. If you feel that you are as passionate as we are, we want to hear from you. All suitable candidates must be fully qualified, GDC registered with UK experience.....Read more...
Associate Dentist Jobs in Inverness, Scotland. Huge earning potential with a well-established patient list to inherit, Up to £25,000 relocation bonus available, Excellent support and professional development opportunities available. ZEST Dental Recruitment working in partnership with an established dental practice is seeking to recruit an Associate Dentist.
Full or Part-time Associate Dentist
Inverness, Scotland
Huge earning potential with a well-established patient list to inherit
Up to £25,000 welcome bonus available
Mixed practice with Excellent private opportunity
Opportunity for a principal dentist leadership role and part-ownership with full support and mentoring available
Full clinical freedom
Excellent equipment including digital x-ray, OPG, CEREC
Development programme for newly qualified dentists
Bespoke professional, career development, and clinical mentoring
Superb professional development including access to Orthodontic / Clear Aligner training + CPD Allowance
Access to a state-of-the-art training academy
Fully trained support team
Permanent position
Reference: DL4517
This is a well-presented and modern six-surgery dental practice offering an array of treatments and provides excellent opportunities for implants, CEREC restorations, whitening, AirFlow, and private restorations – composite, bridges, crowns and veneers.
The practice is mindful that the most important thing is its people and patients. As such, you will benefit from a high-spec working environment, with full clinical freedom and the support where and when you need it most. You will be working with a happy team, keen to provide the best service, experience, and treatments for their patients. They provide flexibility to give you the perfect work/life balance and training so you can develop your clinical skills with full support.
Successful candidates will be GDC-registered dentists.
For further information regarding this dentist position, confidential enquiries can be made by submitting your CV to ZEST Dental. All applications and enquiries will be treated in the strictest of confidence.....Read more...
DENTAL ASSOCIATE - BLAIRGOWRIEAn opportunity has become available for a Qualified Dental Associate to join a mixed practice located in Blairgowrie, Perth and KinrossWe are recruiting a full-time Associate Dentist, Ideally you will work 4 or 5 days per week but we are open to discussion. A well-maintained list of NHS patients is available for you and there is an excellent opportunity to offer private treatments here also.Who are we looking for?•Someone with the ambition to drive the expansion of the practice and provide a high level of clinical care•Experience in General & Private dentistry/ Facial Aesthetics/ Composite bonding•The ability to work well in a team set up•A passion for continuous professional development is essential•Experience with Software of Excellence (SOE) practice software is preferable•GDC registration and VT number are essentialPractice information:This modern, fully equipped surgery practice offers NHS, private and cosmetic treatments including teeth whitening, hygiene treatment and dental implants and is a well-led practice with a very experienced team.The services that this dental practice includes are:•General & Private dentistry•Teeth whitening •2nd Stage Implants•Clear Step•Inman•Facial Rejuvenation•Digital Scanner•Highland Dental PlanLocation information:Located in the centre of town and with free parking available. Its proximity to amenities such as eateries, pharmacy, post offices and shops makes this clinic a very convenient location.What can this group offer you?•Dedicated Clinical Support team to help develop your career and grow your income•Scotland’s only dedicated in-house training facility with phantom heads and lecture rooms for hands-on and theoretical training•Complementary or subsidised training for Associates•Digital Dentistry•Excellent green credentials and commitment to reducing our environmental impact•Great clinical freedom and support from a fully trained team•Work-life balance•Software of ExcellenceOverseas Applicants:This group welcomes applications from overseas dentists. Visa sponsorship and relocation support is available and will be discussed in detail with successful applicants to support each candidates’ specific requirements.....Read more...
LOCUM DENTIST REQUIRED IN GRAT YARMOUTHFull time or part time working 8:30am to 17:30pm (we can be flexible with days and working hours)Day rate of £450 with a target of 25 UDAs. We will pay a rate for overachievementAny private work completed will be paid at a 50% private rate.We have an inclusive, friendly and supportive team to enable you to deliver excellent patient care.7 surgery, mixed practiceBased close to the high street and beach in Great Yarmouth. Air-conditioned surgeries and free roadside parking is available. Our surgeries have a wide range of high quality equipment and materials ensuring that you have the clinical freedom to offer high quality standards of patient care.You will be joining a team with the superb support of:Our established patient baseAccess to our clinical support groupAvailable Regional Manager and Clinical DirectorSupport with any training to increase the services you offer (possible financial help too)Lead clinician on hand to help discuss cases and patient issues and actively encourage this.Access to supporting specialists for more complex casesWe have a successful and robust internal marketing system which actively promotes individual dentist's special interests to direct patients for specific treatments.The practice can offer:Fully computerised with modern well-equipped surgeries in a large and fully refurbished practiceAn excellent team morale with long standing members both clinical and non-clinicalAn ethos of collaboration - we actively ask the dentists/hygienists to discuss cases with or without patients present for second opinions, advice, treatment planning or even assistanceA dedicated management structure so issues are sorted swiftly and with minimal disruption to the working dayDigital X-raysDentally with patient portal and online booking and payment systemRotary Endodontic Equipment with apex locators for both NHS and Private careDigital intra-oral cameras linked to large screen TVsImplant MotorSandblastersiTeroCBCT ScannerAn excellent standard of equipment which is regularly serviced and maintainedAn excellent selection of materials readily available and stockedAir-conditioned and ventilated surgeriesA set of excellent hygienists operating three days of the week, who works out of a dedicated hygienist surgeryAccess to treatments including composite bonding, implants and Invisalign....Read more...
Job Summary:
Assist with the day-to-day manufacturing process of UPVC windows ensuring that compliance to company procedures is maintained.
Responsibilities:
Cutting - locate and select profile, load material into cutting machine, measure cut profile and check angles and routering are within specification, label and store product.
Welding - operate welding machine to build frames and sashes in accordance with labelled profile, checking welding temperature and Teflon plates for defects, scan product for tracking.
Corner cleaning - machine clean welded products. Inspect cleaned product ensuring cleaned frame is within specification. Scan into location.
Window gearing - scan window sashes to check hardware requirements, assemble hardware as required, check quality and scan into location.
Window hanging - scan window sashes to check hardware requirements, assemble hardware as required, check quality and take to next process.
Door gearing - scan window sashes to check hardware requirements, assemble hardware as required, check quality and scan into location.
Door hanging - scan window sashes to check hardware requirements, assemble hardware as required, check quality and take to next process.
Beading - measure apertures for the purpose of cutting beads in accordance with labelled profile, cut beads to required size using automated cutting centre, scan product for tracking and take to quality control.
Composite doors - check works details for specification required, prep frame and slab, hang slab in frame, check quality and take to quality control.
Quality control - scan product to check hardware requirements are correct, check quality, affix consumables and scan into location.
Training Outcome:On completion of the level 2 Fenestration qualification, providing you show the correct skills and abilities, you will have the opportunity to progress onto a full-time position and possibly a level 3 apprenticeship.Employer Description:Flair has been supplying homeowners with bespoke products for many years and is now one of the country’s leading local installers/manufacturers of uPVC windows, doors, roofs, and sealed units.
We are a family owned business headed by Managing Director Peter Lugg, who works alongside his wife Sharon and son Ryan.
Through rapid growth and development, we strive to maintain the “family feel.” Family values are at the core of our business, and we believe every customer should expect to have their needs met—and that’s precisely what Flair does.Working Hours :Monday to Thursday, 6.30am to 3.15pm.
Friday, 6.30am to 2.45pm.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Team working,Initiative,Physical fitness....Read more...
A new opportunity has become available for a Locum Dental Associate to join a mixed practice located in Southend, Essex.Details:
Full time positions – We are looking for someone to work the Monday to FridayDenplan Available – Expand your private patient portfolio.Supportive Practice Team – Including qualified nurses and a dedicated support office.
The practice offer flexible working patterns, allowing you to tailor your hours to suit your needs and the practice. With a strong focus on both NHS and private care, you’ll have the opportunity to deliver excellent patient care while also developing your private work.Their inclusive and collaborative culture, coupled with competitive remuneration, ensures a fulfilling career. They’re there to support you in achieving your professional development goals. What you can expect from the practice:
A strong, established patient base.Access to our clinical support group and specialists for complex cases.Guidance and mentorship from experienced colleagues, including a Lead Clinician on hand for case discussions.Support with training to expand your skill set, with potential financial assistance.Robust internal marketing to promote your special interests and attract patients for specific treatments.
About the practice:Located in the heart of Southend, the practice is just a 5-minute walk from Victoria train station. They are a fully equipped, mixed NHS and private practice, offering a modern and welcoming environment to both our team and patients.Practice Highlights:
Fully computerised with Dentally patient portal, online booking, and payment systems.Modern, air-conditioned surgeries equipped with:
Rotary Endodontic Equipment and apex locators for NHS and private care.A wide selection of high-quality materials.
Access to advanced treatments such as composite bonding, Invisalign, and implants.A dedicated staff room with kitchen facilities and lockers.Collaborative ethos: our team actively engages in case discussions and peer-to-peer learning.
Payment: £450 day rate.In order to apply, candidates must be fully qualified and GDC registered with an active performer number, UK experience and compliance documentation.....Read more...
DENTIST REQUIRED IN GREAT YARMOUTHTo work Tuesdays- Fridays, they will consider fewer days Working hours: 8:30am- 5pm, on Wednesdays it will be until 7:30pmAll candidates must be GDC registered with an NHS performer numberOffering £15 per UDA and 50% Private remuneration 6000 UDA’s, they can reduce the UDA targetThe role is to replace an existing dentist, existing patient list to take overOption for additional £2 per UDA for every UDA a dentist therapist completes as long as they are willing to support them by taking their band 3s (these will be around 5 per month and they will still receive the UDAs for this, but shared with the therapist)Option to work with an Overseas qualified dentist for £1,000 per month to help them get their NHS performer number £60k private earning potential Golden hello if they provide 6,000 UDAs.8 surgery practice with 7 associates and 2 hygienists.Discounted training opportunities with Tipton diplomas and Invisalign. Invisalign is £1,040 with first 3 cases £1 lab bills Option of using Pearl AI software to help spot areas for concern with x-rays. Option to use chairside for AI note taking Equipment
Fully computerised with modern well-equipped surgeries in a large practice
A dedicated staff room with kitchen facilities and lockers An excellent team morale with long standing members both clinical and non-clinical An ethos of collaboration - we actively ask the dentists/hygienists to discuss cases with or without patients present for second opinions, advice, treatment planning or even assistanceA dedicated management structure so issues are sorted swiftly and with minimal disruption to the working day Digital X-rays Dentally with patient portal and online booking and payment systemRotary Endodontic Equipment with apex locators for both NHS and Private care iTero Implant Motor Airflow CBCT Scanner DSLR CamerasAn excellent standard of equipment which is regularly serviced and maintained An excellent selection of materials readily available and stocked Air-conditioned and air purifiers in surgeries A set of excellent hygienists operating each day of the week who work out of a dedicated hygienist surgery and who works closely with the dentists Access to treatments including composite bonding, implants and Invisalign A dedicated Treatment Coordinator Dentally softwareGreat Yarmouth practice is a 5 minute walk from the beach and has great transport links to Norwich city within 40 minutes.We use henry schein and dental directory for equipment and consumables but can consider other equipment if dentist wants to use different equipment.We have a marketing team who will help promote your skills and bring in more private revenue. Discounted training opportunities with Tipton Academy, Invisalign. Also close working relationship with Denplan essentials & Smile White which builds private. Also new equipment being added to practices such as Pearl AI x-ray software We have a very supportive clinical director in Rishi who is approachable and is happy to support the dentists in training and advice. There is also a clinician WhatsApp which is good for building connections and asking for advice.....Read more...
At Alford Manor House, we’re passionate about great food and friendly, professional service. As our new apprentice you will assist our Head Chef with a variety of varied and interesting duties:
Help with preparing ingredients for a range of different meals
Cook and present dishes to recipe and quality guidelines, ensuring every plate looks and tastes great
Maintain food hygiene standards, including correct storage, cleaning allergen awareness, date and temperature checks
Batch cookery and preparations
Support stock rotation
As well as food preparation you will also assist with front of house service within the tearoom, bar and table service during functions and events
Follow all safety practices– from safe knife handling to correct use of kitchen equipment
Take part in structured training to build your skills, kitchen know-how, and career potential
Handle fast-paced service and last-minute changes with a calm, flexible attitude
Assisting with cleaning and washing-up
All other associated duties as required
Training:All delivery for this apprenticeship will take place within your place of work at Alford Manor House. A dedicated Vocational Trainer will visit on average once every 4 weeks, to establish a personal learning and development plan, outlining a schedule of training activities and objectives.
You will complete a mixture of on and off the job training, including workshops, face to face training and working towards creating a portfolio of relevant practical evidence. You’ll also be supported by your colleagues at all times, and will be mentored and trained constantly.
You will have a review every 8-12 weeks with your Head Chef and Trainer to discuss your progress.Training Outcome:This apprenticeship programme provides a fantastic opportunity for apprentices to build a strong foundation of practical cookery skills. The apprenticeship will lead to a permanent job role for the right candidate.Employer Description:Alford Manor House is a remarkable and inspiring place to work, offering a unique blend of history, community spirit and fresh, locally sourced food. As one of the country’s rare composite buildings, its Georgian, Victorian and original 1611 features create a truly special setting, complemented by beautiful seasonal gardens and a vibrant programme of exhibitions and events. The on-site tea rooms and kitchen, proudly rated Grade 5 for hygiene, make use of produce grown in the Manor House gardens and supplied by trusted local businesses, ensuring high-quality ingredients every day. Working here means being part of a friendly, dedicated team that supports each other while delivering excellent food and service to visitors. It’s an opportunity to develop your skills in a distinctive heritage environment where there is always something new to experience.Working Hours :Hours and days of work can vary, due to the different seasonal opening times of Alford Manor House. Work will include days, evenings, weekends and bank holidays (see below for a full breakdown on opening days and times).Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Creative,Initiative,Physical fitness,Keen to learn,Awareness of food safety,Awareness of food hygiene,Friendly and professional,Passionate,Genuine interest....Read more...
The selected individual will be responsible for but not limited to the following obligations:
Monitor and resolve help desk queries including escalation of tickets where necessary other IT team members as appropriate.
Set-up and install new PC hardware / software, in accordance with recognised procedures and standards.
Carry out daily plus monthly scheduled housekeeping activities, such as responsibility for the Network Server back up.
Carry out network administration duties such as adding and removing network user ids and email accounts in line with departmental procedures and standards.
Record hardware faults and liaise with third-party maintenance companies to assess whether repairs meet economic justification. Undertake routine hardware maintenance.
Liaise with Response Centre Analysts, including other Response Centre locations, to ensure effective coverage of regional/local issues and effective handoff of function user issues to other locations or staff members.
Deliver IT technology training through individual discussions, Live Meeting sessions and scheduled.
Provide administrative duties as required by the department.
Entry requirements:
Exceptional customer service skills.
Solid IT troubleshooting skills.
Ability to work well in a team environment across multiple countries/regions.
Good oral and written communications skills and the ability to work under minimal supervision. Ability to develop, maintain, and promote strong internal and external relationships.
Awareness of the PC industry’s current and emerging technology trends and direction, as well as a keen interest in computer based information systems and technology.
Experience in Microsoft applications (Excel, Word, PowerPoint)
Conducting research via internet.
Ability to prioritize tasks and efficiently manage time.
Ability to exercise good judgment and effectiveness in working with a high performing team.
Ability to define problems, collect data, establish facts, and draw valid conclusions.
Ability to respond effectively to inquiries or complaints.
Candidates must be eligible to work in the country where the position is based.
Training:Information Communications Technician Level 3 Apprenticeship Standard:
The successful candidate will undertake a 22 month, nationally recognised qualification through TDM. This is a work-based learning programme which will require commitment to block weeks in an online training room once every quarter working towards the qualification along with weekly off the job training and monthly coaching sessions.
You will be required to demonstrate through the standard that you meet all competencies and behaviours, which will lead to the achievement of the qualification. These block weeks will take place online in TDM’s virtual learning platform.
You will have a designated mentor in the workplace to support your learning and at the end of programme will be assessed via an external assessment body.
This is a Level 3 qualification.Training Outcome:The opportunity to progress within the company.Employer Description:With our strong investment in research and development and our culture of continuous improvement, Hexcel is the industry leader in the manufacturing of advance composite materials, including carbon fibre, woven reinforcements, resins, prepregs, honeycombs and additive manufactured parts.Working Hours :Monday to Friday, 9am to 5pmSkills: Communication skills,IT skills,Customer care skills,Problem solving skills,Presentation skills,Logical,Initiative,Non judgemental,Patience....Read more...
CNC Router Supervisor – Signage IndustryLocation: Ashford, KentSalary: Up to £35,000 + OvertimeFull-Time | Permanent | Overtime AvailableWestin Par Recruitment Experts are recruiting for an experienced CNC Router Supervisor on behalf of a well-established and expanding signage manufacturing company based in Ashford, Kent. Due to continued growth and significant investment in advanced CNC machinery, our client is seeking a skilled professional to lead their CNC department.Please note: Applicants should ideally have a minimum of 5 years’ experience within the signage industry. Signage manufacturing experience is essential.This opportunity is ideal for a Senior CNC Operator, CNC Team Leader or CNC Supervisor with strong signage production experience looking to step into a leadership role within a busy sign fabrication environment.The Role – CNC Supervisor (Signage Manufacturing)The successful candidate will oversee the day-to-day running of the CNC department within a specialist signage workshop, ensuring production efficiency, quality control and adherence to Health & Safety standards.Key responsibilities include:
Supervising and mentoring CNC Operators within a signage manufacturing environmentProgramming, setting and operating 3-axis flatbed CNC routersWorking with ArtCam software (preferred)Overseeing CNC Waterjet and CNC Laser operationsReading and interpreting signage production drawingsSelecting and preparing materials including aluminium, acrylic, foam PVC, polycarbonate and aluminium composite panelsSupervising waterjet cutting of aluminium, mild steel and stainless steelMaintaining exceptional quality standards for fabricated signage componentsDriving continuous improvement across CNC signage production processesEnsuring machinery maintenance and workshop cleanlinessPromoting and enforcing high Health & Safety standardsCollaborating with fabrication, assembly and installation teams
Essential Requirements
Minimum 5 years’ experience within the signage industry (essential)Strong CNC routing experience within a sign manufacturing or sign fabrication environmentProven ability to programme, set and operate 3-axis CNC machinesExperience working from detailed signage production drawingsPrevious supervisory, team leader or senior operator experienceStrong organisational, communication and problem-solving skillsGood numerical skills and attention to detailPractical, hands-on and proactive leadership style
Experience with CNC waterjet and CNC laser machinery is advantageous; however, further training can be provided.What’s on Offer
Competitive salaryOvertime opportunitiesOn-site parking360 Wellbeing supportCareer progression within a growing signage manufacturing businessOpportunity to shape and develop a CNC department within the sign industry
This vacancy is particularly suited to candidates searching for:CNC Supervisor jobs Kent, Signage CNC Supervisor vacancies, Sign Manufacturing Supervisor roles, CNC Team Leader signage jobs, CNC Router Supervisor Ashford, Signage Production Manager jobs Kent, Sign Fabrication Supervisor positions.Westin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment AgencyDue to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion.....Read more...
