First 3 months:
Cabling & Installation:
First and second fix cabling across intruder, CCTV and access control installations
Device installation and fixing - PIRs, contacts, cameras, readers, keypads
Cable routing, containment and termination under supervision
Assisting on panel wiring and device connection
Maintenance Support:
Attending planned maintenance visits alongside a senior engineer
Device testing and reporting findings
Replacing consumable parts - batteries, fuses, basic components
Completing job sheets accurately on site
General Site Conduct:
Safe working practices and tool handling
Keeping vehicles and equipment tidy and stocked
Customer interaction - professional conduct on site at all times
Timekeeping and reporting to lead engineer
Learning Objectives:
Developing familiarity with the main system brands used across the customer base
Understanding the difference between Grade 1, 2 and 3 intruder systems
Building knowledge of NSI standards and what compliance looks like on site
What is NOT expected in first 3 months:
Unsupervised commissioning or programming:
Independent fault diagnosis
Customer-facing call-out attendance alone
3- 6 months:
Installation:
Taking greater ownership of cabling runs and first fix with minimal oversight
Device installation across all three disciplines with reducing supervision
Beginning to assist with panel wiring and basic termination checks
Contributing to site surveys and material estimates alongside senior engineer
Maintenance:
Attending planned maintenance visits with increasing independence on routine tasks
Completing full device test sequences with sign-off from senior engineer
Identifying and reporting faults accurately with suggested remedial action
Beginning to attend straightforward reactive callouts accompanied
System Knowledge:
Developing working familiarity with key panel brands across the install base
Understanding basic programming concepts - zones, outputs, user codes
Recognising common fault conditions and their likely causes
Growing confidence reading wiring diagrams and installation documentation
Customer & Site:
Managing own conduct on site without prompting
Communicating professionally with customers on routine matters
Completing job documentation independently and accurately
Learning Objectives:
Ready to assist on commissioning under direct supervision by end of month 6
Developing capability toward lone working on straightforward maintenance visits. Building toward first unsupervised reactive attendance on minor faults
Training:Fire Emergency and Security Systems Technician Level 3.
4 day working week with your employer Vanguard Alarms, one day at SBC Training Ltd as part of your Apprenticeship Training programme.Training Outcome:Full-time engineering role.Employer Description:Established in 1974, Vanguard Alarms Ltd is a leading provider of security systems across Shropshire & surrounding counties. As an NSI NACOSS Gold accredited company with a BS EN ISO 9001:2015 quality management system, we are committed to delivering reliable and effective protection.Working Hours :Monday - Friday, 08:30 - 17:00.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Physical fitness....Read more...
Senior ICT Design Engineer Hybrid (3 days in the office)£55,000 - 65,000Industry/Sector: Building Services – Data CentresAs a Senior ICT Design Engineer, you will have the opportunity to grow your career with a world leading MEP Consultancy specialising in hyperscale data centre projects. You will be a part of one of the fastest growing businesses at the forefront of data centre technology. The Senior ICT Design Engineer is a key part of the business offering an exceptional mix of hands on technical responsibility with client facing and commercial activities. Senior ICT Design Engineer Responsibilities:Carries out cost and profit diagnosis on projects including feasibility studies and preparation of fee bidsReviews status advised by project personnel and external parties and modifies schedules or plans as required.Prepares project reports for Management, Client or others.Represents Company at technical meetings with customers, professional teams and contractors’ teamsSupport the delivery of projects in accordance with the expectations of the RED Project Delivery Process from a Project Management, Financial Management, QA/QC and Technical Review perspectiveDay to day decision making on project progress and direct liaison with, and provides advice to clientResponsible for running of medium size projects.Undertakes a client facing role in the development and design and coordination of engineering project services for ICT/Security installations, systems, equipment, facilities etc.Responsible for technical content and accuracy of Trainee, Graduates and Engineers Senior ICT Design Engineer Skills and Experience:Critical Facilities/Data Centre DesignCampus NetworksLAN Ethernet SwitchingWi-Fi Network CommunicationsStructured Cabling SystemsFibre Optic NetworksData Cabling Containment SystemsTelecommunication Network Infrastructure and Services Benefits 23 days annual leave plus bank holidaysHybrid working (3 days in the office)Private healthcare schemeCompany bonus scheme (performance related)Professional Membership costs paidAbout Energi People Having spent 20 years earning trust across MEP building services, structural and mission-critical engineering with the very best construction engineering firms in the UK, UAE, USA and beyond, we know the disciplines, the best employers, and crucially, the roles that aren’t advertised. Find out more at https://energipeople.com/....Read more...
Install first‑fix cabling for fire alarm systems and life safety systems as directed by project drawings and supervisor instructions.Route cables through containment (trunking, conduit, tray, basket) ensuring neat, compliant, and obstruction‑free runs.Drill, fix, and secure cable routes using appropriate fixings, supports, and spacing in line with BS 7671 and BS 5839‑1 requirements.Identify and protect cable routes in live construction environments, maintaining segregation from other services (LV, HV, gas, water).Label and record cable runs for traceability and handover documentation.Report issues such as blocked routes, structural changes, missing containment, or clashes with other trades.Maintain site safety by following RAMS, wearing correct PPE, and adhering to site rules.Support second‑fix teams by ensuring cable tails, loops, and allowances are left correctly for device installation.Work collaboratively with electricians, fire alarm engineers, and site management to ensure smooth workflow and timely delivery.Training:Install first‑fix cabling for fire alarm systems and life safety systems as directed by project drawings and supervisor instructions.Route cables through containment (trunking, conduit, tray, basket) ensuring neat, compliant, and obstruction‑free runs.Drill, fix, and secure cable routes using appropriate fixings, supports, and spacing in line with BS 7671 and BS 5839‑1 requirements.Identify and protect cable routes in live construction environments, maintaining segregation from other services (LV, HV, gas, water).Label and record cable runs for traceability and handover documentation.Report issues such as blocked routes, structural changes, missing containment, or clashes with other trades.Maintain site safety by following RAMS, wearing correct PPE, and adhering to site rules.Support second‑fix teams by ensuring cable tails, loops, and allowances are left correctly for device installation.Work collaboratively with electricians, fire alarm engineers, and site management to ensure smooth workflow and timely delivery.Training Outcome:One of the following:
- Site supervisor
- Commissioning engineer
- Senior service engineerEmployer Description:Fire Life Safety Installation ContractorWorking Hours :4 days at work, 1 day at Waltham Forest College every weekSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Logical,Team working,Creative,Initiative....Read more...
An exciting opportunity has arisen for an Electrical Engineer to join a high-performing engineering team developing cutting-edge flight simulation technology. These systems replicate real-world aircraft environments and play a critical role in pilot training and aviation safety worldwide.
This role offers the chance to work at the forefront of aerospace innovation, contributing to the design and delivery of advanced electrical and electro-mechanical hardware systems in a fast-paced, customer-driven environment.
You will play a key role in the design, development, and delivery of electrical hardware solutions for complex simulation systems. Working within a multidisciplinary team, you will contribute across the full engineering lifecycle, from concept through to validation and delivery.
Key Responsibilities for the Electrical Engineer
- Design and develop electrical hardware systems for advanced flight simulators
- Produce technical specifications, schematics, and electrical designs
- Develop power distribution systems (single & three-phase), including protection and cable sizing
- Collaborate with software, systems, and mechanical teams to deliver integrated solutions
- Ensure compliance with industry standards and safety-critical requirements
- Conduct testing, validation, and troubleshooting of hardware systems
- Support EMC design and testing activities
- Engage with suppliers for component selection and integration
- Contribute to continuous improvement and innovation across hardware capabilities
- Support or mentor junior engineers where appropriate
Skills & Experience required by the Electrical Engineer
- Degree in Electrical / Electronic Engineering or similar
- 510+ years experience in electrical hardware design (aerospace, defence, simulation, or similar)
- Strong experience with:
- Electrical design and power distribution systems
- Electrical CAD tools (schematics, wiring diagrams, panel layouts)
- EMC principles (grounding, shielding, filtering)
- Hardware testing, validation, and troubleshooting
- Knowledge of BS 7671, Low Voltage Directive, EMC Directive
- Experience working across the full product lifecycle (concept to production)
- Strong communication skills and ability to work within multidisciplinary teams
Desirable Experience required by the Electrical Engineer
- Chartered Engineer (or working towards)
- Experience in flight simulation, avionics, or aerospace systems
- Exposure to computing system integration (rack systems, cooling, data cabling)
- Background in high-reliability or safety-critical environments
Benefits
- Competitive salary + discretionary annual bonus
- Pension (matched up to 7%)
- 25 days holiday + bank holidays (with option to buy/sell)
- Private medical insurance
- Life assurance (4x salary)
- Group income protection
- Employee assistance & wellbeing support (24/7)
- Retail, travel, and leisure discounts
This is a fantastic opportunity for an experienced electrical engineer looking to work on complex, high-impact systems at the cutting edge of aerospace technology.
TT....Read more...
Responsibilities and tasks will include:
Providing hands-on support for Windows 11 IT systems, including: issuing and tracking hardware, assisting users with initial logins and system setup, troubleshooting configuration or cabling issues, and installing port replicators for new laptops
Providing hands-on support for hardware changes, including setting up and configuring user devices such as desktops, laptops, and peripherals
Safely disconnecting, relocating and storing existing equipment and cabling in line with electrical safety and manual handling guidelines, ensuring all connections are secure and neatly arranged to meet safety standards
Provision of support for any reasonable software changes
Performance of routine maintenance tasks such as updates, backups, and system checks
Assistance in diagnosing and resolving simple hardware and software issues
Assisting with IT asset management and inventory tracking
Responsibility for care, operation and daily checks on company-assigned vehicle i.a.w. policy
Responding to basic IT support requests via email, ticketing systems, or in person
Escalating more complex or unresolved customer issues to the Team Leader, when required
At all times providing excellent customer service on client site, following documented procedures and support guidelines
Following all onsite security and health and safety protocols
Training:Apprenticeships include time away from work for specialist training as well as daily on-the-job training. Face-to-face training will take place with our partner apprenticeship provider- PETA Training & Consultancy Ltd, Cosham, Portsmouth.Training Outcome:Successful completion of the apprenticeship may lead to roles such as:
Associate IT Technician (SFIA Level 2)
Service Desk Analyst
Desktop Support Engineer
Employer Description:ALTAEDGE helps the Ministry of Defence and other security organisations solve complex problems with practical and strategic expertise. It works closely with clients to deliver clear, effective solutions. The company manages capability projects to ensure they meet organisational goals and deliver results. With experience across the Navy, Army, and RAF, ALTAEDGE supports digital change and ongoing capability development.Working Hours :Monday to Friday 7.30am to 4.30pm.
You may be required to work overtime/additional hours when authorised and as necessitated by the needs of the business.Skills: Communication skills,IT skills,Organisation skills,Customer care skills,Problem solving skills,Team working,Patience....Read more...
A Senior Electrical Design Engineer is sought to join an innovative engineering team in Hampshire, contributing to the design and development of advanced electrical solutions for specialist, design-to-order projects operating in harsh environments.
The Senior Electrical Design Engineer, Hampshire, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices. This includes exposure to electrical design principles, design-for-manufacture processes, regulatory compliance, and production-level engineering for bespoke systems.
Responsibilities include:
Work with engineering, production, and project teams to define design requirements and technical specifications for complex electrical assemblies and electronic enclosures.
Create schematic designs, circuit diagrams, cabling layouts, interconnect solutions, and control and safety-related electrical systems using electrical CAD tools such as SolidWorks Electrical or similar platforms.
Develop and execute verification and validation activities, including prototype builds, testing, and compliance checks.
Debug and validate electrical systems using appropriate tools, supporting fault-finding activities throughout the design lifecycle.
Collaborate with mechanical, manufacturing, and procurement teams to ensure seamless integration, manufacturability, and reliability of all electrical designs.
Maintain comprehensive technical documentation, including bills of materials, drawings, specifications, and compliance documents, ensuring alignment with UKCA/CE and other industry standards.
Support production and wider engineering teams with technical queries and subject matter expertise across electrical and electronic disciplines.
Key skills & experience:
Degree or equivalent qualification in Electrical Engineering or a related discipline.
Proficiency with electrical CAD tools (SolidWorks Electrical ideal, but similar platforms also considered).
Practical experience designing electrical systems for electronic assemblies, enclosures, or harsh-environment applications.
Strong understanding of regulatory frameworks, including UKCA/CE marking and standards such as BS EN IEC 62368-1.
Excellent problem-solving, analytical, communication, and teamwork abilities.
How to apply:
Apply now for the Senior Electrical Design Engineer role in Hampshire. Send your CV to ADighton@RedlineGroup.Com Or call Adam Dighton on 01582 878821.....Read more...
An exciting opportunity has arisen for an Electrical Hardware Engineer to join a high-performing engineering team developing cutting-edge flight simulation technology. These systems replicate real-world aircraft environments and play a critical role in pilot training and aviation safety worldwide.
This role offers the chance to work at the forefront of aerospace innovation, contributing to the design and delivery of advanced electrical and electro-mechanical hardware systems in a fast-paced, customer-driven environment.
You will play a key role in the design, development, and delivery of electrical hardware solutions for complex simulation systems. Working within a multidisciplinary team, you will contribute across the full engineering lifecycle, from concept through to validation and delivery.
Key Responsibilities
- Design and develop electrical hardware systems for advanced flight simulators
- Produce technical specifications, schematics, and electrical designs
- Develop power distribution systems (single & three-phase), including protection and cable sizing
- Collaborate with software, systems, and mechanical teams to deliver integrated solutions
- Ensure compliance with industry standards and safety-critical requirements
- Conduct testing, validation, and troubleshooting of hardware systems
- Support EMC design and testing activities
- Engage with suppliers for component selection and integration
- Contribute to continuous improvement and innovation across hardware capabilities
- Support or mentor junior engineers where appropriate
Skills & Experience
- Degree in Electrical / Electronic Engineering or similar
- 510+ years experience in electrical hardware design (aerospace, defence, simulation, or similar)
- Strong experience with:
- Electrical design and power distribution systems
- Electrical CAD tools (schematics, wiring diagrams, panel layouts)
- EMC principles (grounding, shielding, filtering)
- Hardware testing, validation, and troubleshooting
- Knowledge of BS 7671, Low Voltage Directive, EMC Directive
- Experience working across the full product lifecycle (concept to production)
- Strong communication skills and ability to work within multidisciplinary teams
Desirable Experience
- Chartered Engineer (or working towards)
- Experience in flight simulation, avionics, or aerospace systems
- Exposure to computing system integration (rack systems, cooling, data cabling)
- Background in high-reliability or safety-critical environments
Benefits
- Competitive salary + discretionary annual bonus
- Pension (matched up to 7%)
- 25 days holiday + bank holidays (with option to buy/sell)
- Private medical insurance
- Life assurance (4x salary)
- Group income protection
- Employee assistance & wellbeing support (24/7)
- Retail, travel, and leisure discounts
This is a fantastic opportunity for an experienced hardware engineer looking to work on complex, high-impact systems at the cutting edge of aerospace technology.
TT....Read more...
The apprentice will work alongside experienced air conditioning engineers, supporting the installation of air conditioning systems in homes, offices and commercial premises.
Day-to-day duties will include:
Preparing sites, tools, equipment and materials for installation work
Assisting with the installation of indoor and outdoor air conditioning equipment
Supporting pipework, cabling, containment, trunking and condensate drainage works
Safely handling, moving and positioning equipment and materials
Learning to read drawings and follow installation instructions
Keeping work areas clean, tidy and safe
Helping to complete job paperwork and look after company tools and equipment
Representing SFE Services professionally when working at customer sites
The apprentice will attend the College of North West London one day per week during term time to complete the Level 3 Refrigeration, Air Conditioning and Heat Pump Technician Apprenticeship, with the remainder of the week spent gaining practical on-the-job experience.
Training:Training will be delivered through a combination of practical, on-the-job learning with SFE Services Ltd and day-release college training.
The apprentice will work alongside experienced installation engineers throughout the week, gaining hands-on experience on live air conditioning installation projects. They will attend the College of North West London in Willesden, London, one day per week during term time to complete the Level 3 Refrigeration, Air Conditioning and Heat Pump Technician Apprenticeship.Training Outcome:On successful completion of the apprenticeship, there will be the opportunity to progress into a fully qualified Air Conditioning Installation Engineer role within SFE Services Ltd.
Further development may include additional manufacturer training, F-Gas certification and the opportunity to progress into senior installation, service or supervisory roles as experience develops.Employer Description:SFE Services Ltd is a family-owned air conditioning and ventilation company providing installation, maintenance and repair services throughout the UK. We pride ourselves on delivering excellent customer service and creating opportunities for people to learn, develop and build successful careersWorking Hours :Monday to Friday, working 40 hours per week between 7:00am and 7:00pm. Working hours may vary depending on project and site requirements.Skills: Communication skills,Attention to detail,Organisation skills,Team working,An interest in practical work....Read more...
