Firmware Developer required to design, develop and optimise low level high performance drivers, Digital Signal Processors and CPU???s
Key skills:
Intel AVX or Xeon, Arm Cortex, AMD Epyc or similar high performance 64bit CPU???s
Linux Kernel internals, Kernel Bypass or High Performance Networking DPDK
Role:
Real-time C/C++ software implementations of wireless communication digital signal processing for high-performance SIMD CPUs, (Intel AVX-512, ARM Neon etc.)
Software drivers and APIs development for hardware implementations of wireless communication signal processing, using interfaces such as DPDK and PCIe.
Integrate wireless communication signal processing into open-source reference systems, such as FlexRAN, O-RAN and Open Air Interface.
Writing device drivers for PCIe endpoints
Desirable experience:
SIMD intrinsic programming for Intel AVX and ARM Neon
DPDK programming
GPGPU development
This is a fantastic opportunity to join a fast growing company working on the cutting edge of commercial communications.....Read more...
Firmware Developer required to design, develop and optimise low level high performance drivers, Digital Signal Processors and CPU???s
Key skills:
Intel AVX or Xeon, Arm Cortex, AMD Epyc or similar high performance 64bit CPU???s
Linux Kernel internals, Kernel Bypass or High Performance Networking DPDK
Role:
Real-time C/C++ software implementations of wireless communication digital signal processing for high-performance SIMD CPUs, (Intel AVX-512, ARM Neon etc.)
Software drivers and APIs development for hardware implementations of wireless communication signal processing, using interfaces such as DPDK and PCIe.
Integrate wireless communication signal processing into open-source reference systems, such as FlexRAN, O-RAN and Open Air Interface.
Writing device drivers for PCIe endpoints
Desirable experience:
SIMD intrinsic programming for Intel AVX and ARM Neon
DPDK programming
GPGPU development
This is a fantastic opportunity to join a fast growing company working on the cutting edge of commercial communications.....Read more...
Embedded Software Developer required to design, implement, and validate software for embedded devices.
Skills
Embedded Software Engineering in C and C++.
Hardware and protocol knowledge ideally of ARM chipsets and SPI, I2C, UART, CAN or USB communications.
Real time operating systems such as Keil RTX, FreeRTOS or ThreadX.
IDEs ideally Keil uVision, Freescale CodeWarrior, STM32cubeIDE or NXP MCUxpresso.
Role
Designing, developing, implementing and testing embedded software systems in C and C++ for ARM Cortex Microcontrollers.
Code for ThreadX and FreeRTOS real time operating systems.
Replicate, debug and resolve any problems.....Read more...
Embedded Software Developer required to design, implement, and validate software for embedded devices.
Skills
Embedded Software Engineering in C and C++.
Hardware and protocol knowledge ideally of ARM chipsets and SPI, I2C, UART, CAN or USB communications.
Real time operating systems such as Keil RTX, FreeRTOS or ThreadX.
IDEs ideally Keil uVision, Freescale CodeWarrior, STM32cubeIDE or NXP MCUxpresso.
Role
Designing, developing, implementing and testing embedded software systems in C and C++ for ARM Cortex Microcontrollers.
Code for ThreadX and FreeRTOS real time operating systems.
Replicate, debug and resolve any problems.....Read more...
Embedded Firmware required to port from ARM7 to ARM Cortex M4. This is an upgrade and port project that will add functionality and improve the performance of an existing control and communications system.
Embedded Firmware required to port from ARM7 to ARM Cortex M4. This is an upgrade and port project that will add functionality and improve the performance of an existing control and communications system.
Embedded Software Engineer required to join a team working in Embedded C on Microcontroller Programming.
Key skills
Embedded C
Microcontrollers, ARM Cortex based ideally ST Cortex-M
Version control ideally in GIT
GCC compiler knowledge
Build understanding of CMake
Docker, GDB
Python
Linux
DevOps, Continuous Integration and automated testing experience beneficial.
Motion control Embedded Software Engineer required to develop motor control systems, motion sensors and their interfaces.
Skills
Embedded software development including Embedded Linux.
Firmware design and debug, Protocol sniffers, Oscilloscope etc.
Communication protocol knowledge.
Electronic or Electrical Engineering degree.
Role
Programming Embedded C, firmware for microprocessors ARM, STM32 and DSPs.
Embedded Software Engineer required to join a team working in Embedded C on Microcontroller Programming.
Key skills
Embedded C
Microcontrollers, ARM Cortex based ideally ST Cortex-M
Version control ideally in GIT
GCC compiler knowledge
Build understanding of CMake
Docker, GDB
Python
Linux
DevOps, Continuous Integration and automated testing experience beneficial.
Motion control Embedded Software Engineer required to develop motor control systems, motion sensors and their interfaces.
Skills
Embedded software development including Embedded Linux.
Firmware design and debug, Protocol sniffers, Oscilloscope etc.
Communication protocol knowledge.
Electronic or Electrical Engineering degree.
Role
Programming Embedded C, firmware for microprocessors ARM, STM32 and DSPs.
Azure DevOps Engineer - London / Remote
(DevOps Engineer, Azure DevOps, Cloud, Azure, Kubernetes, AKS, Terraform, Azure Web Services, Visual Studio Team Services, Jenkins, CI/CD, Microservices-based architecture, Azure Resource Manager (ARM), GIT, DevOps Engineer, Azure DevOps Engineer)
We’re pleased to be presenting the opportunity to work at one of Silicon Valley’s most successful and exciting brands. They’re at the heart of the Internet, helping the most innovative companies remove the complexities of delivering any experience, to any device, anywhere.
They are looking to hire an experienced Azure DevOps Engineer to take responsibility for managing and supporting a 100% uptime production environment in Azure. You will support the product development teams by building tools and support systems; such as automated build, continuous integration, test scripting and result management.
Azure DevOps Engineer candidates should have experience with some or all of the following (full training will be provided to fill any gaps in your skill set): Azure, Kubernetes, AKS, Terraform, Azure Web Services, Visual Studio Team Services, Jenkins, CI/CD, Microservices-based architecture, Azure Resource Manager (ARM) and GIT.
If you’re dedicated to the youthful optimism of problem solving through intellectual curiosity, collaboration and commitment this could be the role for you. Our client is growing quickly. If you’d like to work in a culture where hard work and innovative ideas are consistently rewarded, join them and help shape the future of the hyperconnected world.
Location: London / Remote
Salary: £60k - £90k + Bonus + Pension + Benefits
To apply for this position please send your CV to Nathan Warner at Noir.
NOIRUKTECHREC
NOIRUKREC....Read more...
Firmware C and C++ developer required to work closely with hardware engineers completing fast turnarounds on critical engineering projects on Renesas microcontroller family, ARM Cortex microcontrollers, Embedded serial communications and object oriented software including C++ and the C# .NET framework for GUI development.
The idea candidate will also have
Knowledge of Physics (especially electricity and magnetism).
DSP techniques.
Use of oscilloscope
The role requires at least a 2:1 engineering degree with additional experience in software development skills and a willingness to grow and develop. Working effectively with other engineering teams and other departments is key as is the ability to learn a broad product range quickly. ....Read more...
Firmware C and C++ developer required to work closely with hardware engineers completing fast turnarounds on critical engineering projects on Renesas microcontroller family, ARM Cortex microcontrollers, Embedded serial communications and object oriented software including C++ and the C# .NET framework for GUI development.
The idea candidate will also have
Knowledge of Physics (especially electricity and magnetism).
DSP techniques.
Use of oscilloscope
The role requires at least a 2:1 engineering degree with additional experience in software development skills and a willingness to grow and develop. Working effectively with other engineering teams and other departments is key as is the ability to learn a broad product range quickly. ....Read more...
Senior Electronics Design Engineer to work as part of a product research and development team responsible for electronic design from concept to production and release of world beating optical instrumentation systems to be used in green tech, microelectronics, scientific research, life sciences and medicine.
Experience required
Designing electronic circuits and assemblies from concept to production.
Debugging, simulation and validation of electronics and system designs.
Testing and reporting results into the Development team.
Microcontroller, mixed digital and analogue electronic circuit design.
Schematics Capture and PCB Design Tools.
Prototyping: soldering with SMT components
Debugging and validation of electronics and system designs.
STM32F series ARM core processors.
Automated test equipment development to support production and manufacturing. ....Read more...
Senior Electronics Design Engineer to work as part of a product research and development team responsible for electronic design from concept to production and release of world beating optical instrumentation systems to be used in green tech, microelectronics, scientific research, life sciences and medicine.
Experience required
Designing electronic circuits and assemblies from concept to production.
Debugging, simulation and validation of electronics and system designs.
Testing and reporting results into the Development team.
Microcontroller, mixed digital and analogue electronic circuit design.
Schematics Capture and PCB Design Tools.
Prototyping: soldering with SMT components
Debugging and validation of electronics and system designs.
STM32F series ARM core processors.
Automated test equipment development to support production and manufacturing. ....Read more...
Embedded Software Engineer with bare metal programming required to write low level code for embedded systems in C and C++.
The Senior Embedded Software Engineer will develop firmware and software for new and existing products as part of a project team contributing to design discussions and activities. This is a Hybrid role with one day a week working from the office.
Requirements
Bare metal Embedded C Development experience.
Electronics degree or other relevant subject.
Real time embedded programming and debugging skills.
Keil uVision for ARM or Realtime OS e.g. FreeRTOS exposure would be an advantage.
Responsibilities
Design, Develop and test firmware for new and existing products.
Develop test software and procedures, e.g. test automation.
Evaluate new technologies and products.
Take part in design architecture and code reviews.....Read more...
Embedded Software Engineer with bare metal programming required to write low level code for embedded systems in C and C++.
The Senior Embedded Software Engineer will develop firmware and software for new and existing products as part of a project team contributing to design discussions and activities. This is a Hybrid role with one day a week working from the office.
Requirements
Bare metal Embedded C Development experience.
Electronics degree or other relevant subject.
Real time embedded programming and debugging skills.
Keil uVision for ARM or Realtime OS e.g. FreeRTOS exposure would be an advantage.
Responsibilities
Design, Develop and test firmware for new and existing products.
Develop test software and procedures, e.g. test automation.
Evaluate new technologies and products.
Take part in design architecture and code reviews.....Read more...
PCB Design Engineer required to work on SATCOM terminal hardware in senior or leadership role as part of a team designing and implementing satellite antenna terminals. All decisions require design for manufacture considerations balancing cost, control, environment and operation practicalities.
Skills
Electronic hardware design, integration, test and refinement experience.
Complex Schematic and multilayer PCB design ideally in Altium for complex RF stackup PCBs.
Power supply design, power management, switching and regulator circuit design.
BEng, Meng in ideally Ph.D. in Electronic Engineering or equivalent.
Embedded hardware ARM and Xilinx FPGA or SoC knowledge.
High speed digital understanding with high speed bus design experience of DDR, PCIe, PS-GTR or other.
Role
Technical leadership on complex hardware designs including terminal architecture.
Verify and test hardware design in electronics laboratory using oscilloscopes and spectrum analysers reworking PCBs as makes sense.
Support product certification to electrical and operational standards.
Train and develop junior Hardware Engineers. ....Read more...
PCB Design Engineer required to work on SATCOM terminal hardware in senior or leadership role as part of a team designing and implementing satellite antenna terminals. All decisions require design for manufacture considerations balancing cost, control, environment and operation practicalities.
Skills
Electronic hardware design, integration, test and refinement experience.
Complex Schematic and multilayer PCB design ideally in Altium for complex RF stackup PCBs.
Power supply design, power management, switching and regulator circuit design.
BEng, Meng in ideally Ph.D. in Electronic Engineering or equivalent.
Embedded hardware ARM and Xilinx FPGA or SoC knowledge.
High speed digital understanding with high speed bus design experience of DDR, PCIe, PS-GTR or other.
Role
Technical leadership on complex hardware designs including terminal architecture.
Verify and test hardware design in electronics laboratory using oscilloscopes and spectrum analysers reworking PCBs as makes sense.
Support product certification to electrical and operational standards.
Train and develop junior Hardware Engineers. ....Read more...
Effective use of a FARRO measuring arm
Daily patrols of CNC machines to check WIP
Daily patrols of welding stations to check WIP
Checking/measuring parts from sub contractor suppliers
Inspecting 1st off parts
Producing PPAP Level 3 reports
Liaising with customers when quality issues arise
Processing customer returns and tracking/progress chasing reworks
Training Outcome:
Fully Qualified Support Technician
Employer Description:Link Business is a family run, small but busy and fast paced sub contract machine shop and fabrication company thatprovides manufacturing solutions to regional, national and international customers from many industrial sectors.Working Hours :Hours
Monday- Thursday
7am- 4pm
Friday
7am- 12pmSkills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Administrative skills,Logical,Team working,Initiative,Positive attitude,Self Motivated....Read more...
Key Responsibilities will include:
Ensuring 100% accuracy of all administration relating to vehicles to include; raising vehicle invoices, taxing vehicles and updating manufacturer systems.
Processing all documentation accurately, efficiently and effectively, ensuring all parts of the sales process has been completed.
Supporting and chasing the progress of all aspects of Fleet sales to ensure prompt delivery of vehicles, keeping relevant team members up to date.
Supporting the department’s housekeeping and audit processes, ensuring information and customer details are kept up to date and used accurately.
Support Accounts and management in preparing sales reports.
Ensuring correct costs including bonus are allocated to the correct vehicles.
Training:Business Administrator Level 3 Apprenticeship. This apprenticeship is delivered through work based learning, this means that all training is done at the workplace eliminating the need to attend college. The successful candidate will be allocated a tutor who will provide a mixture of interactive online group teaching and 1-1 training monthly.Training Outcome:This is a fantastic opening to gain permanent employment in a varied and ever expanding industry. JCT600 has an enviable reputation for well trained, high quality staff and this is a career opportunity not to be missed.Employer Description:JCT600 has a long and proud motoring history extending back to 1946 when Tordoff Motors was first established, the leasing arm (VLS) was created in 1988. We have over 32 years experience in delivering the highest value fleet services. The business is one of the only truly independent/family owned providers of UK wide vehicle funding and management solutions.Working Hours :Monday - Friday, 9.00am - 5.00pm. 37.5 hours per week.Skills: Communication skills,Organisation skills,Customer care skills,Problem solving skills....Read more...
Are you a Software professional with a background in DSP and have exposure to developing 5G applications?
If so I’d like to speak with you!
A well-established R&D organisation who are also a market leader, are looking to rapidly expand their engineering team and as such are seeking an Embedded Software Engineer to join their development team near Leicestershire.
As an Embedded Software Engineer you will have a background in Digital Signal Processing and a working knowledge of communications systems engineering. To successful candidate for the Embedded Software Engineer job will have a mixture of embedded/bare metal experience alongside an understanding of implementing communication signal processing algorithms such as DDCs, filters, FFTs.
Skills/Experience required for the Embedded Software Engineer job include:
- BEng/BSc or MSc/Meng within Engineering (Ideally Electronics, Telecommunication or similar)
- Experience in DSP Algorithm simulation and 5G development
- Experience in Bare Metal/ Embedded C
- Experience with RF a bonus
Experience of the following would be advantageous:
- Cross compilers (C++ ARM cross-compiler GCC Version 4.3.3)
- FreeRTOS experience
- Experience with typical embedded control peripherals (i.E. RAM, Flash, UART, PWM, A/D, CAN, I2C and SPI)
- Cortex M3/M4 Microcontrollers or similar.
- Experience of efficient implementation of communications DSP algorithms (such as FFT, filtering DDC etc.) In VHDL
This is a fantastic opportunity to join a well-established, highly profitable company investing heavily in R&D. This is a great chance for a Embedded Software Engineer to join a consistently growing technology company offering great training and career progression opportunities.
To apply for the Embedded Software Engineer job please send your CV to Ricky Wilcocks, rwilcocks@redlinegroup.Com or phone 01582 87 8810 or alternatively 079317 88834.....Read more...
Registered Veterinary Nurse (Anaesthesia)Location: GuildfordA world-renowned centre for excellence in oncology, soft tissue surgery, internal medicine, and interventional radiology based in Guildford is seeking an Anaesthesia Registered Veterinary Nurse (RVN) to join its specialist team.This hospital focuses on delivering the best possible outcomes for dogs and cats referred for treatment, offering secondary and tertiary-level clinical expertise and exceptional animal care. The team is committed to upholding the highest standards in veterinary science.Facilities include state-of-the-art equipment such as:
Four operating theatres160-slice CT scanner with injector pumpC-arm fluoroscopy unitCell-salvage autotransfusion unitIntra-operative imaging with Near-InfraRed Fluorescence (NIRF)Interventional Radiology suiteMinimally invasive surgical equipmentCystoscopy/endoscopy/bronchoscopyTwo chemotherapy rooms plus hood roomContrast-enhanced ultrasonography (CEUS)Digital radiographyFull in-house laboratory
About the RoleThe Anaesthesia RVN plays a vital role in delivering patient care to animals requiring anaesthesia for imaging and surgery. This position involves close collaboration with specialists, residents, interns, Senior RVNs, RVNs, and Veterinary Care Assistants (VCAs).The successful candidate will be driven, motivated, and eager to develop their clinical nursing skills and knowledge to an advanced level. The role demands dedication, attention to detail, and teamwork to ensure the highest level of patient care.Working closely with the Clinical Nursing Instructor in Anaesthesia and Senior Clinicians, the Anaesthesia RVN will learn and apply advanced nursing skills, utilise problem-solving techniques, and take time-critical actions to ensure patient safety and welfare.The role also includes participation in the general nursing rota, providing weekend, bank holiday, and out-of-hours cover as required.Benefits
Great Holiday AllowanceCPD allowanceRCVS subscription paidWorkplace pension schemeEnhanced maternity/paternity leaveRecruitment referral reward schemeDeath in service schemeFree parkingWeekly fresh fruit delivery
Wellbeing & Employee Support
Online GP accessUnlimited mental health counsellingEmployee Assistance ProgrammeAnnual flu jabSavings and discounts via BenefitHub....Read more...
Registered Veterinary Nurse (Anaesthesia)Location: GuildfordA world-renowned centre for excellence in oncology, soft tissue surgery, internal medicine, and interventional radiology based in Guildford is seeking an Anaesthesia Registered Veterinary Nurse (RVN) to join its specialist team.This hospital focuses on delivering the best possible outcomes for dogs and cats referred for treatment, offering secondary and tertiary-level clinical expertise and exceptional animal care. The team is committed to upholding the highest standards in veterinary science.Facilities include state-of-the-art equipment such as:
Four operating theatres160-slice CT scanner with injector pumpC-arm fluoroscopy unitCell-salvage autotransfusion unitIntra-operative imaging with Near-InfraRed Fluorescence (NIRF)Interventional Radiology suiteMinimally invasive surgical equipmentCystoscopy/endoscopy/bronchoscopyTwo chemotherapy rooms plus hood roomContrast-enhanced ultrasonography (CEUS)Digital radiographyFull in-house laboratory
About the RoleThe Anaesthesia RVN plays a vital role in delivering patient care to animals requiring anaesthesia for imaging and surgery. This position involves close collaboration with specialists, residents, interns, Senior RVNs, RVNs, and Veterinary Care Assistants (VCAs).The successful candidate will be driven, motivated, and eager to develop their clinical nursing skills and knowledge to an advanced level. The role demands dedication, attention to detail, and teamwork to ensure the highest level of patient care.Working closely with the Clinical Nursing Instructor in Anaesthesia and Senior Clinicians, the Anaesthesia RVN will learn and apply advanced nursing skills, utilise problem-solving techniques, and take time-critical actions to ensure patient safety and welfare.The role also includes participation in the general nursing rota, providing weekend, bank holiday, and out-of-hours cover as required.Benefits
Great Holiday AllowanceCPD allowanceRCVS subscription paidWorkplace pension schemeEnhanced maternity/paternity leaveRecruitment referral reward schemeDeath in service schemeFree parkingWeekly fresh fruit delivery
Wellbeing & Employee Support
Online GP accessUnlimited mental health counsellingEmployee Assistance ProgrammeAnnual flu jabSavings and discounts via BenefitHub....Read more...
Fortuna Healthcare was originally established in 1995 as an independent family-run distributor of medical products and chemist sundry lines to the UK independent pharmacy market. It is now the wholesale arm of Fortuna Group (London) Ltd, a successful healthcare services company based in Enfield, London.
The company has an exciting new opportunity to work in a sales administration role in which the successful applicant would form part of a very friendly and highly ambitious team within a fast moving and dynamic small business environment. A competitive salary together with a generous benefits package is available to the successful applicant.
This is a key role within the company’s Sales & Marketing Department and consists of day-to-day involvement in the strategic activities of the business as a whole. The successful applicant would work under the close supervision of the company’s management team with the position consisting of the following key areas of responsibility:JOB DESCRIPTION:
Provide overall supervisory support and cover for the Sales & Marketing ManagerOrganise sales and marketing campaignsProduce sales reportsPrepare sales representative and customer presentersMarket research for new productsContribute to the company’s social media and online platformsParticipate at trade exhibitionsDistribute printed material to potential customers
JOB SKILLS SET:
Applicants should have experience of supervising staff in a busy office environmentApplicants should be articulate and possess excellent interpersonal and analytical skills for dealing with customers/suppliers/colleaguesExcellent administration skills are necessaryBasic IT skills are important and familiarity with social media would be an advantageA knowledge of Adobe Illustrator and Photoshop graphic design software is desirable but not essential as training can be provided
JOB SPECIFICATION:
Job Title: SALES ADMINISTRATION LEADReporting to: SALES & MARKETING MANAGERLocation: FORTUNA HEALTHCARE: UNITS 3-4 CROWN ROAD, NORTHGATE BUSINESS CENTRE, ENFIELD, LONDON EN1 1TGStart Date: January 2026Hours: 8.30am – 5.30pm > MONDAY – FRIDAY **Part-time role to be consideredSalary: Basic Salary £28K–35K > subject to experience / Annual Bonus / Benefits Package
If you feel that you would be successful in this role then please attach your CV, together with a covering letter with details of your current and expected package to the link provided. DISABILITY CONFIDENT: Please note that Fortuna Healthcare is committed to the employment, retention and development of employees with disabilities of any kind. Applications from all individuals are welcome.DIVERSITY COMMITMENT: As part of our company’s ongoing efforts to reflect our diverse customer base we at Fortuna Healthcare are actively seeking to hire candidates from all backgrounds.....Read more...
