My client is a world leader in the provision of highly advanced technical solutions. They are currently looking for an Electronic Technician to join their team. The right candidate should have knowledge of telecommunication system and structure.
Key requirements:
Maintenance and repair electronics equipment, and high power devices, power supplies and telecommunications equipment.
Test and measurement products including oscilloscopes
Testing to relevant procedures and specifications using the relevant customer software and field configuration.
assembly, testing and calibration of small batches of our range of products, including fault diagnosis and repair of hardware
Key skills:
Ability to use soldering tools
An understanding of electronics and circuit design
Ideally qualified to ONC/HNC level preferably in Electronics
Candidates who are currently an Assembler, Electronics Assembler, PCB Assembler, Electrical Technician, Production Technician, could be suitable for this position.
To make an application for this role please submit your CV
....Read more...
We are currently seeking a talented Battery Test Engineer to join our team in Milton Keynes. This role offers an exciting opportunity to work on cutting-edge battery technology within a dynamic and collaborative environment.
Responsibilities:
As a Battery Test Engineer, you will be responsible for:
Utilizing Vector & CanAnalyzer for communication with battery pack & associated assemblies.
Creating dashboards for the Operations team to interpret battery communication data easily.
Developing in-line and end-of-line battery verification processes & procedures.
Creating and verifying test scripts for module/battery pack cycling using NHR's & AV900/lynx.
Developing leak test processes/procedures for in-line & end-of-line quality checks using Sciemetric/Furnace controls/Infacon.
Performing software flashing of battery BMS and associated assemblies.
Identifying battery fault codes/failure modes through experimental work during the prototype phase.
Supporting battery teardown diagnosis post prototype testing.
Collaborating cross-functionally to define pass/fail criteria for in-line & end-of-line testing.
Working with the production/manufacturing site team to hand over test procedures/specs from the prototype location including best practice & lessons learned.
Developing Operations technician team in core test competencies and use of test equipment.
Defining hardware requirements for battery programs (including harnesses and test equipment).
Requirements:
Bachelor's degree in Electrical Engineering, Mechanical Engineering, or related field.
Proven experience in battery testing, preferably in a manufacturing environment.
Proficiency in Vector & CanAnalyzer for battery communication.
Experience with creating dashboards and test scripts.
Familiarity with leak test processes and software flashing.
Strong problem-solving skills and attention to detail.
Excellent communication and collaboration abilities.
Ability to occasionally travel to off-site test sites during work hours.
Working Hours:
8:00 AM - 4:00 PM, Monday to Friday (Some flexibility required to support production team)
If you are interested in this excellent opportunity, please immediately apply via the job board to be considered.
....Read more...
An Electrical Repair Technician is required on a permanent basis, working Monday – Friday days for our manufacturing client based in Lewes, East Sussex. This opportunity will offer a salary of between £25,000 - £29,000 per annum in addition to benefits such as company and performance bonus, 32 days holiday (including bank holidays), private healthcare and many more.
You will be working for a market-leading, multi-million pound, global manufacturer that has been operating for nearly four decades and is continuously expanding and growing. This position will provide you with further training, career development and the chance to work within a fast-paced and dynamic department.
Roles and Responsibilities as an Electrical Repair Technician:
Diagnose, repair and test electronic assemblies to component level.
Hand soldering and rework of faults.
Reading and interpreting circuit diagrams and assembly drawings.
Working to time-critical requirements to a high quality and standard.
I would be interested to see CVs from candidates who have:
A Level 3 qualification in Electronics or Electrical Engineering as this is essential.
A minimum of 3 years’ experience in electronic repair, test or engineering within a manufacturing environment as this is essential.
Have an IPC certification as this would be desirable.
Benefits provided to you as an Electrical Repair Technician:
Company and performance bonus.
Private healthcare
Company pension
24 days holiday + bank holidays = 32 days annual leave
2 expensed company events per year
Free onsite parking
If you would like to find out more, please click apply or contact Megan Hepworth at E3 Recruitment on 01484 645269 or via email at....Read more...
Test Development Engineer
How would you like the opportunity to work for one of the local area's most well-known Engineering Companies?
A market leader within their industry, with a strong order book and new markets continually being pursued with new product offerings in development. This role sits within the Test function of the business, supporting the hardware development, test and verification in order to deliver electronic or electrical components and subassemblies into projects and products
Our client seeks a Test Development Engineer who is very much a doer as a primary and a strong Test Technician as a secondary. You will be mentored and supported by the Engineering Manager
The Test Development Engineer will be an experienced hands-on individual who has sound test knowledge and capability with a background in defence, aviation, aerospace, or military would be ideal.
Responsibilities for the Test Development Engineer:
- Conduct Valve Development testing under the supervision and mentoring of R&D technicians, design engineers and the Engineering Manager, applying sound engineering practices in a timeframe consistent with business objectives.
- Design qualification test parameters for the validation of new products in accordance with project objectives and milestones.
- Apply relevant engineering standards, legislation, certification, and customer compliance ensuring comprehensive validation and reporting is delivered.
- Compile test reports as required for documenting design validation compliance and maintaining comprehensive traceability.
- Conduct concurrent engineering tasks optimising designs for manufacturing methodology, assembly, and testing processes.
- Develop test equipment capabilities and continuous improvement in data acquisition software/hardware and pressure/flow mechanical equipment.
- Conduct VAVE tasks to derivative and existing products, ensuring manufacturing costs are minimised and cost targets are achieved working coherently with production Engineers.
Experience required for the Test Development Engineer:
- Mechanical Engineering Degree, Diploma, or equivalent qualification or experience.
- Demonstrable key skills in and knowledge around materials, stress analysis, and practical mechanical assembly.
- Practical skills and good working knowledge of precision manufacturing, CNC lathes, milling, and general Fabrication.
- Experience or knowledge of engineering software, 2D and 3D CAD, FEA, CFD, Mathcad, and MS Office, preferably using Autodesk platforms (AutoCAD, Inventor, ANSYS).
- Professional and effective communication skills, both verbal and written.
- Strong organisational skills as the role will involve working on various projects simultaneously, including coordinating with other project team members, liaising with manufacturing and sales departments, reviewing progress as well as evaluating results.
- Commitment to work to deadlines and determination to see a job through to a satisfactory conclusion.
- Knowledge of high-pressure valves for Nuclear, Oil, Gas and Space.
- Knowledge of electrical engineering and solenoid design.
Benefits for the Electronics Engineer Manager include:
- Flexible working Hybrid options
- Pension
- Competitive salary
This is a full-time permanent position for the successful. Test Development Engineer
For more information simply apply now or call Ian on 07734406996 or e-mail ian.broadhurst@holtengineering.co.uk....Read more...
An automotive company, is looking to recruit a Test Technician to assist in testing of electronic product range including software, firmware, and hardware.
Responsibilities will include:
Troubleshooting ??? probably gained in a hardware or software support environment.
Testing electrical systems and performing fault diagnosis.
Manage and record data.
Main skills:
Experience with Software testing, Data analysis.
Exposure to GPS technologies.
An understanding of automotive technology.
Basic electronics knowledge.
Full clean UK driving license.....Read more...
An industry leader in the design of complex electronics is looking for a Graduate Electronics Repair Technician. My client designs and manufactures a range of innovative imaging, instrumentation and wireless communication electronics for various industries.
My East Sussex based client are easily commutable from Hastings, Worthing, Brighton, Newhaven, Lewes, Crawley, Royal Tunbridge Wells and Horsham.
As a Graduate Electronics Repair Technician, you must be Minimum HNC/HND/OND in Electronics or relevant electronic discipline
For the Graduate Electronics Repair Technician position based in East Sussex, you will have some of the following experience;
- Degree in Electronics or relevant discipline.
- Be able to Test, Diagnose and Repair to component level.
- hand soldering and use of rework station. IPC certification an advantage.
- Competence in the navigation of circuit diagrams and assembly drawings.
- Experience of soldering and rework of soldering related faults
- Attention to detail.
This is an exciting opportunity for an Electronics Graduate of relevant discipline that is looking for the next career step.
To Apply for the Graduate Electronics Repair Technician in East Sussex, please send your CV to Klea Leka at KLeka@redlinegroup.Com or call 01582 878813 / 07961 158785....Read more...
Vehicle Technician / Mechanic
Location: Shrewsbury / Telford, Shropshire
Salary: £24,000 - £33,400 + Excellent Benefits
Job Type: Full-Time, Monday - Friday (38.75 hours)
The Client:
Our client is a well-established car dealership, offering exceptional customer service and specialising in new and quality used cars from top manufacturers.
The Role:
As a Vehicle Technician / Mechanic, you will play a pivotal role in performing routine servicing, vehicle preparation, and warranty work.
Training will be provided to potential candidates.
Requirements:
? Previously worked as a Vehicle Technician, Vehicle Mechanic or in a similar role.
? Possess relevant experience and qualifications.
? MOT Test accreditation would be desirable.
? Strong work ethic and positive attitude.
Benefits:
? Competitive salary
? 22 days holiday
? Company pension
? Bonus scheme
? Employee discount
? Referral programme
? Overtime availability
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: Vehicle Technician, Vehicle Mechanic, Car Mechanic, Car Technician, Technician, Dealership, Jobs
....Read more...
Vehicle Technician / Mechanic
Location: Shrewsbury / Telford, Shropshire
Salary: £24,000 - £33,400 + Excellent Benefits
Job Type: Full-Time, Monday - Friday (38.75 hours)
The Client:
Our client is a well-established car dealership, offering exceptional customer service and specialising in new and quality used cars from top manufacturers.
The Role:
As a Vehicle Technician / Mechanic, you will play a pivotal role in performing routine servicing, vehicle preparation, and warranty work.
Training will be provided to potential candidates.
Requirements:
* Previously worked as a Vehicle Technician, Vehicle Mechanic or in a similar role.
* Possess relevant experience and qualifications.
* MOT Test accreditation would be desirable.
* Strong work ethic and positive attitude.
Benefits:
* Competitive salary
* 22 days holiday
* Company pension
* Bonus scheme
* Employee discount
* Referral programme
* Overtime availability
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: Vehicle Technician, Vehicle Mechanic, Car Mechanic, Car Technician, Technician, Dealership, Jobs
....Read more...
Electronic PCB Production Technician required to work on the assembly, testing and calibration of small batches of electronic devices used on cars and autonomous electric vehicles. This will include fault diagnosis and hardware repair.
You will have recent experience of electronics manufacturing or PCB, instrumentation or similar product servicing.
Key skills
Electronics and circuit design knowledge.
Soldering, surface mount and through hole.
Fault find to component level.
Test and measurement equipment.
Ideally qualified to ONC/HNC level preferably in Electronics
Full driving license is essential for this role!....Read more...
WE ARE RECRUITING!
I am currently recruiting for a Laboratory Technician for my client in Yeovil.
The role of Laboratory Technician will include:
- Tank maintenance and chemical additions.
- Stock control of chemicals.
- pH control and chemical analysis
- Producing and conducting tests on test panels.
- Producing and conducting tests on Hardness, Salt Spray and Coating Weight.
- Electrical insulation & conductivity testing.
- Advise on RCCA when discrepancies occur.
- Support production/quality issues.
- Writing reports on findings.
- Assist in Internal Audits, Continuous improvement and 5S, REACH compliance.
- Maintaining a safe place of work, ensuring all activities performed are in accordance with regulatory and
Skills and experience required for the Laboratory Technician:
- Degree in Chemistry (preferable but not required as training can be provided)
- Aerospace/ plating experience (preferable but not required)
- English, Science and Math GCSE, or equivalent
- Highly analytical with excellent attention to detail.
- All-rounded interpersonal and communication skills.
What you get in Return:
- On completion of probation period (13 weeks) a Signing On payment of up to £2,000
- Referral scheme up to £2,000
- Death in Service (4x salary)
- Simply Health cash back plan (up to £2,475 per year)
- 25 days holiday + bank holidays
- Enhanced sick pay
- Workplace pension
- In-house cycle to work scheme
If you are interested in this fantastic opportunity please apply or call Ian at Holt Engineering on 07734406996.....Read more...
HGV Technician - Manchester
Client
My client are a specialist engineering company whom seek an experienced HGV Technician based in Manchester
With a fantastic reputation, my client specialise within HGV Fleet industry and have a number of trucks and depots in the UK.
An excellent opportunity has arisen within the Lancashire area for an experienced HGV Technician
Key Responsibilities:
• Service, Repair, Breakdown
• Call out
• Static/Field Service based
• Test & Inspection
Qualifications/ Experience:
Ideally 2 + years experience within HGV Industry but full training will be given.
Electrical/Mechanical Qualifications are an advantage
You must have a history with the HGV Industry to apply for this position
Package
My client are paying an excellent salary and package, They have left the salary details up for negotiation at interview stage, My client are offering an excellent bonus structure, Pension, Health Care,
For further vacancies please visit our website. www.hammondrecruitment.com
If you believe you have the right experience and qualifications please forward your CV
If this position is NOT right for you, still forward you’re CV. We specialise in many industries and have a number of other positions that maybe more suitable for your background
All communication will be treated confidentiality
Hammond Recruitment Group is acting as an Employment Agency in relation to this vacancy.....Read more...
HGV Technician - Manchester
Client
My client are a specialist engineering company whom seek an experienced HGV Technician based in Manchester
With a fantastic reputation, my client specialise within HGV Fleet industry and have a number of trucks and depots in the UK.
An excellent opportunity has arisen within the Lancashire area for an experienced HGV Technician
Key Responsibilities:
• Service, Repair, Breakdown
• Call out
• Static/Field Service based
• Test & Inspection
Qualifications/ Experience:
Ideally 2 + years experience within HGV Industry but full training will be given.
Electrical/Mechanical Qualifications are an advantage
You must have a history with the HGV Industry to apply for this position
Package
My client are paying an excellent salary and package, They have left the salary details up for negotiation at interview stage, My client are offering an excellent bonus structure, Pension, Health Care,
For further vacancies please visit our website. www.hammondrecruitment.com
If you believe you have the right experience and qualifications please forward your CV
If this position is NOT right for you, still forward you’re CV. We specialise in many industries and have a number of other positions that maybe more suitable for your background
All communication will be treated confidentiality
Hammond Recruitment Group is acting as an Employment Agency in relation to this vacancy.....Read more...
Calibration Technician / Maintenance Engineer (Air & Torque Tools) required for a permanent position in the Chester / Deeside area. Competitive salary (DoE) + excellent benefits, see below. The Air Tool Calibration Technician will be working circa 39 hours (Initially Mon – Fri days then likely to move to rotating double days shift pattern i.e.6-2/2-10 with shift allowance paid).
Applications also welcomed from candidates who have recently completed a mechanical engineering apprenticeship or recently qualified or completed relevant engineering / maintenance qualifications, Trainees or Repair / Service Technicians, Mobile Engineer, Hire Service Fitter, Mechanical Fitter, Mechanic or similar trades who have used, maintained or even calibrated air / pneumatic equipment, torque tooling, hand tools or service / hire equipment.
Benefits:
Competitive salary (DoE)
Circa 39 hours/week (Mon – Fri days).
25 days holiday plus bank hols.
Company Pension
Life Assurance
Company sick pay (following a qualifying period)
Company "perks" benefits
Medicash Health plan
Occasional O/T
Primary Purpose of the job: Responsible for undertaking various maintenance activities and calibrations to Customers specification and ISO900 accredited in accordance with Company Procedures, UKAS regulations and recognised specifications.
Maintaining relevant records of work, data and results in a traceable and auditable manner utilizing our customers tooling management systems.
Day to day duties of the successful Air Tool Calibration Technician include:
Safe and effective use, maintenance, calibration and repair of air tools used to build aircraft in in the aerospace industry.
You will be responsible for the preparation and provision of test specifications.
Handling technical enquiries and liaising with clients where necessary.
Receiving and registering any work as necessary.
Completing test schedules & technical reports to effect optimum efficiency of the calibration area.
Maintain relevant records and data.
To follow company H&S guidelines
To be suitable for this Air Tool Calibration Technician role you must have the following experience / characteristics:
Prior experience of using air / pneumatic and torque tooling.
Recent mechanical maintenance / mechanical fitting experience.
Good communication skills.
Good PC literacy.
The ideal Calibration Technician / Maintenance Engineer (Air Tools) will have the following skills / experience:
Completed a relevant mechanical engineering apprenticeship.
Relevant mechanical / maintenance qualification such as C&G / NVQ / BTEC Level 3, HNC, HND etc.
Experience of repairing / maintaining electric / cordless hand tools, service / hire equipment etc.
Recently or currently repairing / maintaining air tools such as Avdel Bottle, Cherrymax Bottle, Huck Puller / Swager, Nut Runner, Pin Gun, Pulse Gun, Torque Screw Driver, Torque Wrench, Torque Wrench Adjustable used to build aircraft in in the aerospace or automotive industry.
Experience of hand vibration testing equipment.
Inspection or Calibration experience.
Aerospace or Automotive experience.
Key words: Air Tools, Calibration, Repair, Maintenance, Airtools, Aircraft Fitter, Mechanical Assembly, Mechanical Fitting, Mechanical Maintenance Engineer, Calibration Technician, Avdel Bottle, Cherrymax Bottle, Huck Puller / Swager, Nut Runner, Pin Gun, Pulse Gun, Pneumatic, Torque Tooling, Torque Screw Driver, Torque Wrench, Torque Wrench Adjustable, Inspection, AS 9100, QA, QC, Aerospace, Automotive, HSS, Ex HM Forces, Chester, Cheshire
Does that sound like you? If so, we'd love to see your CV.
This position could be right for you if you’ve worked / want to work as any of the following: Mechanical Maintenance Apprentice / Trainee, Calibration Technician, Calibration Engineer, Mobile Engineer, Service Technician, Mechanic, Hire Service Fitter, Repair Technician, Ex Forces, Bench Fitter, Mechanical Fitter
The successful Air Tool Calibration Technician / Maintenance Engineer (Air Tools) will need to demonstrate a degree of flexibility as there will be potential O/T, a possibility of working weekends and occasional travel to other sites. The successful applicant will need to have a practical approach to work along with the relevant qualifications / experience.
If you are interested in Air Tool Calibration Technician role and have the required experience please click on the apply now button.....Read more...
Electronic Technician required to join an Applications Engineering team who adapt existing instrumentation devices to specific customer needs. You will work across the complete product life cycle from conception, specification, user acceptance testing and high level pre- and post-sales support.
Requirements
Electronics or related degree standard, Electronic Engineering, Mechatronics etc.
Practical PCB build, soldering, crimping etc.
Diagnostics and fault finding with Oscilloscope and other test apparatus.
Communication skills, you will work with external stakeholders.
Interest in aviation, automotive or space industries.
RF signals and GNSS knowledge.
?
To succeeds in the role, you will have a strong engineering foundation, project management skills, electronics knowledge and the ability to understand and adapt existing products to customer requirements.....Read more...
Electronic Technician required to join an Applications Engineering team who adapt existing instrumentation devices to specific customer needs. You will work across the complete product life cycle from conception, specification, user acceptance testing and high level pre- and post-sales support.
Requirements
Electronics or related degree standard, Electronic Engineering, Mechatronics etc.
Practical PCB build, soldering, crimping etc.
Diagnostics and fault finding with Oscilloscope and other test apparatus.
Communication skills, you will work with external stakeholders.
Interest in aviation, automotive or space industries.
RF signals and GNSS knowledge.
???
To succeeds in the role, you will have a strong engineering foundation, project management skills, electronics knowledge and the ability to understand and adapt existing products to customer requirements.....Read more...
Job Title Trainee Mechanic / Trainee Vehicle Technician
Salary £30,000 - £40,000
Hours - 8-5pm Saturdays on a rota
Location - Petersfield
Do you have what it takes to join the UK Automotive industry as a Trainee Mechanic?
What if you have studied Vehicle Mechanics through college, but not received the qualifications needed to take your career in the Motor Trade to the next level?
What about not having the money to invest in an expensive toolkit [£1000-£1500] meaning your career never left the ground?
This is your chance. We are working with a very successful independent Garage, and they are looking to take on a Trainee Vehicle Technician, offering a competitive basic salary and excellent career progression / training.
- No bonus schemes. A Flat, annual salary [£30,000]
- Full training and development through their associated training partners
- Weekly pay
- Toolbox will be paid for by the company in advance, and you will pay it back incrementally over the course of time.
Trainee Vehicle Technician job role:
- Ensure repairs are carried out according to manufacturers procedures and in a safe and responsible manner.
- Assist in the fault diagnosis process.
- Comply with warranty procedures during repairs and with warranty material on completion of a repair.
- Road test vehicle when required.
- Ensure that all vehicle defects are reported to your workshop controller
If you have a positive attitude, a strong work ethic and a desire to succeed in the Motor Trade, talk to Eric at Holt Automotive. He can tell you more about the role and its rewards. Call 07885 857727 or email eric@holtrecruitment.com....Read more...
Quality Assurance Technician
Based: Stoke-on-Trent
We are an international leader in the manufacture and distribution of small domestic products and appliances. Due to ambitious expansion and development plans, we are actively looking to appoint a Quality Assurance Technician to join our in-house QA Team.
Based at their site in Stoke-on-Trent, as a member of the Quality Assurance Team, you will be testing products, assessing function, performance and build quality within a Laboratory environment to ensure that the products are fit for market and meet the required standard for the brand.
This will involve; samples for assessment to include first samples, pre-shipment samples and stock samples tested and assessed following departmental procedures.
You will also be assessing returned products and establishing the reason for failure and will become familiar with UK & EU standards and legislation.
As a result, you will contribute towards the development of successful products by aiding the designers and engineers in the development stage through test reports, design input and root cause analysis of issues identified.
Ideally applicants will have previous experience of working in a test facility (either in-house or an external test house) or have hands-on experience of completing the QA testing procedure.
Ideally, candidates should have:
Hands on mechanical and/or electrical skills
Excellent attention to detail.
Good verbal and written communication skills.
Organised and structured with a drive for a clean, orderly, tidy and safe working environment.
Computer literate with good abilities with MS Excel & Word.
Enthusiastic with a ‘can do’ outlook.
An ability to get things done. Completes and finishes work with no loose ends.
The ability to work to tight deadlines under pressure and ability to handle multiple projects and priorities.
Able to work as part of a team or own initiative as required, and work with minimal supervision
Preferred but not essential:
Good understanding of Quality systems (e.g. ISO 9001)
Good understanding of relevant UK, European and International regulations standards, codes of practice and procedures (e.g. UKCA, CE, CCC, LVD, IP ratings, etc.)
Good experience of working in a technical test facility.
Minimum 1 years’ industry related experience in testing of products with mechanical, electrical, electronic & software elements.
Good experience of following detailed test requirements and protocols.
Good organisational skills with the ability to prioritise tasks and make confident decisions.
In return, we are able to offer an attractive salary and benefits package.
This role can be surmised as one that is very process-driven and product-focused. You must have good investigative skills with strong attention to detail; good organisational and time management skills, be motivated and able to work unsupervised; and have excellent communication skills.
When applying for this role, please indicate your current salary (plus benefits package), minimum salary required, notice period and your reasons for wishing to move from your current company. Alliance Consulting is acting as an employment agency in this respect. Alliance Consulting specialise in the placement of engineers throughout the UK. By sending us your CV you are explicitly consenting to our processing of your personal data on a computer database and/or in manual files for the purpose of evaluating your application for employment. This processing will be carried out in accordance with the UK Data Protection Act 1998. By applying for this role you hereby consent to us submitting your CV to our client. If you do not wish your CV to be sent to our client then you must clearly state this to us. Equally, if there are any companies that you do not wish your CV to be sent to (for whatever reason), then please let us know of this when you apply.....Read more...
Dimensional Calibration Engineer / Mechanical Calibration Technician required immediately for a permanent position in the Stockport / South Manchester area. Competitive salary (DoE) + excellent benefits see below. Working circa 39 hours (Mon – Fri days) - possible flexi-time, the Mechanical Calibration Engineer will predominately be calibrating dimensional, torque and force tools to traceable and UKAS standards
The client will also consider candidates who have part / completed a mechanical apprenticeship or candidates from a mechanical inspection, quality, machining, toolmaking background who have experience of using and or calibrated standard dimensional measuring equipment
Salary & Benefits:
Competitive salary (DoE)
39 hours/week (8 hrs Mon – Thur & 7hrs Fri) – Possible flexible working pattern
25 days holiday plus bank hols.
Company Pension
Life Assurance
Company sick pay (following a qualifying period)
Company "perks" benefits
Medicash Health plan
Occasional O/T
Primary Purpose of Job: Joining the team as a Dimensional Calibration Engineer, you will undertake calibration of measuring equipment to both ISO9001 and ISO 17025 requirements in accordance with Company Procedures, UKAS publications, and other internationally recognised specifications. Maintain relevant records of work, data and results in a traceable and auditable manner utilising calibration management software programs.
The successful Dimensional Calibration Engineer / Mechanical Calibration Tech day to day duties include:
Calibrate dimensional, force, mechanical and torque measuring instrumentation to company procedures, specific parameters and in line with industry standards
Documenting and inputting data / results onto computer and producing quality written documents.
To follow company H&S guidelines.
To be suitable for this Dimensional Calibration Technician role you must have the following experience / characteristics:
Ideally will have completed a relevant mechanical or quality engineering apprenticeship.
Must have previous experience of using and calibrating SOME of the following equipment: vernier callipers, micrometers, DTI’s (dial test indicators), various gauges (pin, plug, ring, screw and height), engineer squares, pressure / force gauges or torque equipment to in-house standards.
Must be able to interpret Engineering drawings with a good understanding of Geometric Tolerances.
Able to work to metric and imperial measurements.
Must be PC Literate (MS Word & MS Excel), Outlook / Email
Must have good interpersonal communication skills and be able to work with the minimum of supervision
The ideal Dimensional Calibration Engineer / Mechanical Calibration Technician will have:
Completed a relevant mechanical or quality engineering apprenticeship.
Previous experience as a Mechanical / Dimensional Calibration Engineer, Mechanical Inspector, QA / Calibration Technician, Toolmaker, Machinist, Bench / Mechanical Fitter etc.
Experience of calibrating a wide range of Dimensional / Mechanical / Physical / Torque or hand-held measuring equipment
Calibrating mechanical measuring instrumentation to National / UKAS standards.
Relevant qualifications in engineering discipline ideally equivalent to HNC or higher.
Knowledge of ISO 17025 and measurement uncertainties.
Previous experience of working in the calibration, aerospace, automotive, engineering or manufacturing sectors.
Key words: Calibration Engineer, Dimensional, Mechanical, Physical, Torque, Mass, Pressure, Test and Measurement, Metrology, Quality Systems, ISO 9001, ISO 17025, UKAS, NPL, Technician, Engineer, Toolmaker, Standards Room, Inspection, Machinist, Fitter, Semi-Skilled, Trainee, Junior, PC Literate, Manufacturing, Aerospace, Automotive, HSS, Ex HM Forces, Manchester, Stockport, Oldham, Bury, Ashton-under-Lyne, Trafford, Altrincham, Greater Manchester
The successful Dimensional Calibration Engineer / Mechanical Calibration Technician will need to be flexible as there may be overtime and other duties not mentioned in this job description. With experience of working in a manufacturing environment, you will have a standard-level education, have the relevant qualifications or experience, be punctual, conscientious, keen and have a practical approach to work.
If you are interested in Mechanical Calibration Engineer role and have the required experience please click on the apply now button.
....Read more...
Electrician
Location: Kent
Salary: £38,000 - £40,000 + Excellent Benefits
Job Type: Full-Time, Monday - Friday
The Client:
Our client is a renowned property maintenance solutions providers, offering cost-effective services in maintenance, construction, and cleaning for commercial and residential properties.
The Role :
They are seeking an Electrical Tester that can conduct a thorough inspection and assessment of electrical installations within a property and has the ability to complete an Electrical Installation Condition Report (EICR).
Duties:
* EICRs including C1/C2s.
* You'll be responsible for electrical testing in properties to assess whether properties are compliant.
* Issuing electronic certificates once testing has been completed. (EICR Report)
* Load jobs completed on to system.
* Complete remedial works and some installations.
Essential Requirements:
* Qualified and Competent in EICRs.
* Experience in Electrical Testing.
* Electrical qualifications (NVQ level 3, 17th Edition or 18th Edition, AM2).
* Test and Inspection qualification (2391 / 2392 / 2393 / 2394 / 2395).
* Up to date knowledge of latest regulations and testing methods.
* Full UK Driving Licence.
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: Electrical Tester, Testing Electrician, Electrician, Electrical Test, Tester, Engineer, Technician
....Read more...
Testing Electrician
Location: Kent
Salary: £38,000 - £40,000 + Excellent Benefits
Job Type: Full-Time, Monday - Friday
The Client:
Our client is a renowned property maintenance solutions providers, offering cost-effective services in maintenance, construction, and cleaning for commercial and residential properties.
The Role :
They are seeking an Electrical Tester that can conduct a thorough inspection and assessment of electrical installations within a property and has the ability to complete an Electrical Installation Condition Report (EICR).
Duties:
* EICRs including C1/C2s.
* You'll be responsible for electrical testing in properties to assess whether properties are compliant.
* Issuing electronic certificates once testing has been completed. (EICR Report)
* Load jobs completed on to system.
* Complete remedial works and some installations.
Essential Requirements:
* Qualified and Competent in EICRs.
* Experience in Electrical Testing.
* Electrical qualifications (NVQ level 3, 17th Edition or 18th Edition, AM2).
* Test and Inspection qualification (2391 / 2392 / 2393 / 2394 / 2395).
* Up to date knowledge of latest regulations and testing methods.
* Full UK Driving Licence.
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: Electrical Tester, Testing Electrician, Electrician, Electrical Test, Tester, Engineer, Technician
....Read more...
Job Title: Senior Vehicle Technician
Location: West Yorkshire-Leeds
Overview:
Location: Leeds
Contract Type: Permanent, Full-Time
Salary: £47,000 OTE (including a basic up to £39,000, plus additional £2,000 for EV qualification and a uncapped bonus of £6,000)
Hours: 42; Monday-Friday: 8:00am - 5:00pm plus alternate Saturdays: 8:00am-1:00pm
My Client has a great opportunity for a Senior Vehicle Technician at their Leeds main dealership to come and join their team as a Senior Vehicle Technician. You know the drill this role is to fix cars, so we will spare you the details!
Our ideal Senior Vehicle Technician will have a minimum level 3 NVQ qualified in Light Vehicle Maintenance and Repair or equivalent, and must have substantial automotive experience. So, are you an experienced Senior Vehicle Technician, able to demonstrate capability of diagnosing a variety of vehicle faults?... Then we would 100% love to hear from you.
The salary range for this vacancy is between £34,000 for a Senior Vehicle Technician up to £39,000 for a Master Technician, plus an additional £2,000 for EV qualification.
Can you conduct vehicle health checks and services using the latest technology?
Do you have an eye for detail and are wheely good at vehicle write ups?
Got a full, clean driving licence ready to road test vehicle faults?
Your driving may be great, but repairing is how you roll?
Lets steer you in right direction... complete your application today and a member of the Holt recruitment team will be in touch.
You don't have to be Brand accredited, as we offer full manafacturers training to all of our Vehicle Technicians, however if you are currently working at an established dealership that's extra ticks for you!
My client is proud to be one of the top three motor vehicle retailers in the UK, representing 32 vehicle manufacturers, selling and servicing a huge range of cars at over 150 franchised dealerships across hundreds of locations throughout the UK & Ireland. They recognise the hard work, flexibility and commitment of our people so we offer an industry leading benefits package.
Senior Vehicle Technician
This includes competitive basic salaries plus;
- Enhanced holidays that increase with service
- Eligibility to join one of our car schemes
- Critical illness cover after 2 years and Life Assurance
- Smart Health - free access to support 24 hours a day, 365 days a year
- Enhanced paid maternity, paternity and adoption leave
- For some roles a company car and additional earning potential through commission or bonus.
They strongly believe in nurturing and providing our people with specific manufacturer brand and management training to enhance career development opportunities. They have a great bunch of people, and we like to celebrate and encourage success at all levels with their annual Excellence Awards. So? What are you waiting for?
They are an equal opportunities employer, who are committed to a working environment that is free from all types of discrimination, is inclusive, and empowers our people to bring their whole self to work and reach their full potential.
If your application is successful we will conduct relevant employment checks prior to you starting with us. Depending on the role and responsibilities, these could include us verifying your recent employment, address and credit history. We may also conduct a criminal record check and a driving licence check.
Senior Vehicle Technician
....Read more...
Service Technician & MOT Tester - Bournemouth
Client
My client are an industry leader within the Motor Trade industry
An excellent opportunity has arisen within the Bournemouth area for an experienced Service Technician & MOT Tester
Key Responsibilities:
Vehicle Maintenance: Perform routine maintenance services, including oil changes, tire rotations, brake inspections, and fluid checks, to keep vehicles in optimal condition and prevent mechanical failures.
Diagnostic Testing: Use diagnostic equipment and tools to identify mechanical, electrical, and electronic problems in vehicles. Diagnose issues accurately and recommend appropriate repairs or replacements.
Repair Work: Conduct repairs on vehicle components, such as engines, transmissions, brakes, steering systems, and suspension systems. Follow manufacturer specifications and repair procedures to ensure quality workmanship.
MOT Testing: Perform MOT tests in accordance with regulatory guidelines and standards. Inspect vehicles for safety, emissions, and roadworthiness criteria. Document test results accurately and issue certificates as required.
Customer Service: Interact with customers to understand their vehicle concerns and provide clear explanations of recommended services and repairs. Address customer inquiries and ensure a positive service experience.
Compliance and Safety: Adhere to all safety regulations and guidelines, including those set by regulatory agencies and internal policies. Ensure that all work is performed in compliance with legal requirements and industry standards.
Record Keeping: Maintain accurate records of vehicle inspections, maintenance services, and repairs performed. Complete service reports, work orders, and documentation as required by regulations and company procedures.
Continuous Learning: Stay updated on industry trends, technological advancements, and changes in regulations related to vehicle maintenance and MOT testing. Participate in training programs and professional development opportunities to enhance skills and knowledge.
You must have a history as a Service Technician & MOT Tester to apply for this position
For further vacancies please visit our website. https://www.chartwellrecruitment.com/
If you believe you have the right experience and qualifications please forward your CV
If this position is NOT right for you, still forward you’re CV. We specialise in many industries and have a number of other positions that maybe more suitable for your background.
All communication will be treated confidentiality
Hammond Recruitment Group is acting as an Employment Agency in relation to this vacancy.....Read more...
Service Technician & MOT Tester - Bournemouth
Client
My client are an industry leader within the Motor Trade industry
An excellent opportunity has arisen within the Bournemouth area for an experienced Service Technician & MOT Tester
Key Responsibilities:
Vehicle Maintenance: Perform routine maintenance services, including oil changes, tire rotations, brake inspections, and fluid checks, to keep vehicles in optimal condition and prevent mechanical failures.
Diagnostic Testing: Use diagnostic equipment and tools to identify mechanical, electrical, and electronic problems in vehicles. Diagnose issues accurately and recommend appropriate repairs or replacements.
Repair Work: Conduct repairs on vehicle components, such as engines, transmissions, brakes, steering systems, and suspension systems. Follow manufacturer specifications and repair procedures to ensure quality workmanship.
MOT Testing: Perform MOT tests in accordance with regulatory guidelines and standards. Inspect vehicles for safety, emissions, and roadworthiness criteria. Document test results accurately and issue certificates as required.
Customer Service: Interact with customers to understand their vehicle concerns and provide clear explanations of recommended services and repairs. Address customer inquiries and ensure a positive service experience.
Compliance and Safety: Adhere to all safety regulations and guidelines, including those set by regulatory agencies and internal policies. Ensure that all work is performed in compliance with legal requirements and industry standards.
Record Keeping: Maintain accurate records of vehicle inspections, maintenance services, and repairs performed. Complete service reports, work orders, and documentation as required by regulations and company procedures.
Continuous Learning: Stay updated on industry trends, technological advancements, and changes in regulations related to vehicle maintenance and MOT testing. Participate in training programs and professional development opportunities to enhance skills and knowledge.
You must have a history as a Service Technician & MOT Tester to apply for this position
For further vacancies please visit our website. https://www.chartwellrecruitment.com/
If you believe you have the right experience and qualifications please forward your CV
If this position is NOT right for you, still forward you’re CV. We specialise in many industries and have a number of other positions that maybe more suitable for your background.
All communication will be treated confidentiality
Hammond Recruitment Group is acting as an Employment Agency in relation to this vacancy.....Read more...
On Site AV VC Service Engineer / Event Technician- This position will see you working on site at a corporate site where you will be a hands on helping to deliver a first class service to the end client. Your responsibilities will the safe and correct diagnosis of faults, kit removal, repair, test implementation and operation of AV / VC / Display and presentation kit as well as event technical support.Essential skills:• Diagnostic / Fault Finding• Client Facing• Understanding of time scalesEssential kit knowledge: • Control Systems Crestron• Presentation Solutions/ Videowalls / Projector / LED / LED and IPTV Distribution • Rack wiring (Schematic and wiring diagram)• DSP (Audinate Dante)Desirable skills:• CTS
NO SPONSORSHIP IS ON OFFER YOU MUST BE IN THE UK / COMING TO THE UK TO BE CONSIDERED OR HAVE THE APPROPRIATE WORKING VISA AS WELL AS PASS SECURITY CLEARANCEaudio visual a/v AV A-V AUDIO-VISUAL AUDIOVISUAL video signal av automation vc CRESTRON cisco videoconference service SUPPORT FIX MAINTAIN MTR AUDINATE DANTE DSP TOOLBOX maintenance audio video signal exterity engineer IPTV MANCHESTER....Read more...
Compliance Technician - Fixed Term Contract- 6 months - Salary pro rata £29,000K - Edinburgh / Borders area CBW have a new opportunity for a Compliance Technician to support the Facilities Service Manager for a National contract and looking after the East Coast of Scotland side of the contract. The position will be delivering a planned and corrective test, inspection and maintenance service to statutory and mandatory building systems and assets at sites in accordance with laid down policy, procedures and safe working practice. To deliver a compliant estate of statutory and mandatory assets and systems in accordance with the appropriate legislative standard, business policy and procedure. As directed by Technical and Compliance Operation. Key Responsibilities: Deliver planned test, inspection and maintenance programme timely to the nominated compliance remit in accordance with legislative requirements, business policy, procedure and engineering standards. Deliver a safe and compliant estate professionally and with integrity, identifying and removing risks in accordance with business policy and procedure for responsible remit. Record and undertake corrective actions immediately were identified for nominated compliance remit. Identify and record corrective actions through duty of care on behalf of the business that are outside compliance remit. Deliver planned corrective maintenance programmes timely to the nominated compliance remit in accordance with legislative requirements, business policy, procedure, andengineering standards. Undertake suitable risk assessment prior to undertaking corrective maintenance work and document in full to ensure and evidence safe working practise. Ensure assets are appropriately certificated and timely in accordance with business policy and procedure. Support workflow efficiency and liaise with the Operations, Compliance and Helpdesk for planned and corrective maintenance tasks management. Ensure all test equipment is calibrated, suitably maintained and meets current regulations. Ensure all relevant correspondence, records and files are appropriately maintained in accordance with business policy and procedure. Duties & Responsibilities: Ensure Site Activity Log Books are completed timely and accurately and are maintained in accordance with business policy and procedure. Support the business in its continuous improvement cycle in compliance strategy and delivery. Provide assistance, expert advice and guidance to customer base on request. Provide support in producing ad-hoc compliance/ technical engineering reports as required. Accountable for the completion of standard or non-standard tasks within compliance area. Undertake the Control of Works Authorised Person (AP) role and support identification of other relevant APs and Competent Persons (CPs) in cluster Acts as part of a team to deliver activities which support technical and compliance objectives. Manage a variety of tasks and plan accordingly within the short-term. Makes decisions within parameters set by Technical Supervisor (Compliance) or Compliance Manager using job/specialist experience. Maybe subject to regular local supervision of progress against results and escalates issues when required. Interacts with stakeholders around specific work efforts and deliverables Supports delivery of Health and Safety policy and standards Supports the activities of others to meet deadlines and quality standards taking account of impact outside area of responsibility. Supports the identification of ways to reduce cost. Has awareness of cost/benefit as applicable to tasks performed May work within a given budget. Responsible use of company Purchase Card May assist less experienced staff Manages the delivery of a team and escalates individual performance issues. Person Specification: Able to organise a small team of individuals carrying out similar tasks For non-supervisory roles performs skilled work requiring technical training (NVQ2 or equivalent) Up to 3 years business experience, Level 2 NVQ or Certificate Level of Qualification. Must have appropriate knowledge of Health, Safety and environmental requirements related to delivery of the assigned tasks. LOLER or PFE Competency Must have recognised qualification and or proven experience in one or more of the deliverable areas. Computer literacy. Full UK Driving Licence Must be suitably located to operate within designated delivery area. Construction Fixings Assoc. - Anchor Testing. Fall Protection – Man Safe Testing (Latchway Accredited) Roof Edge Protection (Handrails) BAFE Roof Working PASMA IPAF Manual Handling Asbestos Awareness....Read more...