Are you a Senior Quality Engineer looking for a new position in Middlesex?
My client is a medium size company who design and manufacture a variety of fire safety systems and equipment to help prevent the spread of fire. They are now looking for a Senior Quality Engineer to join the team.
The Senior Quality Engineer, Middlesex, will have driven continual product improvement strategies through the product lifecycle from product development, through safe-launch and into mass production. This role will suit a senior, yet hands-on, quality engineer.
Other responsibilities include
Design and implement quality systems, such as control plans and gauging techniques, to ensure products meet the exceptional standards required by a premium life-preserving product.
Leading the Quality Control team to continually improve control of incoming components, in-line process control and end-of-line product verification.
Drive the adoption of control plans and certification of conformance reporting into the component supply-chain.
Auditing the supply-chain to ensure compliance to standards and best-practice.
Perform Failure Analysis of discrepant units to swiftly develop containment strategies.
Lead cross-functional teams to permanently design out the causes of failure.
Analysis of RMA data (Failure Modes) to develop, drive, and execute continual product reliability improvements
This Senior Quality Engineer, based in Middlesex, will have experience in a similar role and have:
Lean / TQM techniques such as SPC, MSA / GRR, DOE, 8D, FMEA, Six-Sigma, Poke-Yoke
Experience of driving continual improvement under ISO/TS16949 and ISO9001
APPLY NOW for the Senior Quality Engineer, based in Middlesex, job by sending your CV to Blongden@RedlineGroup.Com or call 01582 878841.....Read more...
Low Voltage Switchboard and Motor Control Design Engineer required to design and build custom LV Switchboards and Motor Control Centres for clients driven solutions. The ideal candidate will have experience in power quality equipment delivery across water utilities, hydro power, food processing, recycling and manufacturing.
Key skill
CAD Electrical Design
Electrical Wiring
Motor control
LV Switchboards
Profibus design
Mitsubishi technologies
Automated design
Materials management, assembly and testing procedure development
BS EN 61439-2;2011, all CE Standards....Read more...
Low Voltage Switchboard and Motor Control Design Engineer required to design and build custom LV Switchboards and Motor Control Centres for clients driven solutions. The ideal candidate will have experience in power quality equipment delivery across water utilities, hydro power, food processing, recycling and manufacturing.
Key skill
CAD Electrical Design
Electrical Wiring
Motor control
LV Switchboards
Profibus design
Mitsubishi technologies
Automated design
Materials management, assembly and testing procedure development
BS EN 61439-2:2011, all CE Standards....Read more...
JOB DESCRIPTION
DAP is looking to hire Quality Manager for our Tipp City Plant. The Quality Manager is responsible to reduce variation and eliminate non-conformance to specifications, standards, and customer expectations in the most cost effective and efficient manner by establishing stable and capable processes.
Responsibilities
Implement, develop, and sustain the DAP Quality Management System which includes: Safety, Documentation and Change Control, Supplier Control, Measurement Systems Analysis and Calibration/Validation, Product Conformance, Process Control and Capability, Complaint Investigation/Root Cause and Corrective Action Implementation, Continuous Improvement, Training, and Semi-Annual Auditing. Supervision of all activities of the Quality Department across all shifts. Work closely with R&D to safely and successfully execute all plant trials. Responsible for organizing all aspects of the trials including implementation of the new formula/process once approved. Manage the Quality Department budget. Responsible for ordering all Quality Department supplies and organizing the department work schedules. Plant Specific Tasks: Active participant in plant safety committee including actions, plant senior leadership group, and plant continuous improvement/project development, implementation, and control.
Requirements:
Bachelor's Degree with 3+ years of experience in the related field. Polyurethane Foam, Paint, Coating, Adhesive and Sealant industry experience preferred. Knowledge and demonstrated application of industry standard Quality Management practices. Demonstrated application of Statistical Process Control and Process Capability Analysis. Understanding of analytical tools such as Gauge R&R Studies and Measurement Capability Studies. Experience with material testing and generally accepted laboratory practices. Very strong problem-solving skills. Ability to effectively communicate with various levels of the organization including manufacturing plants, technical and management personnel. Strong written and verbal communication skills. ASQ Six Sigma certifications are preferred.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products. DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores. DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers. Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online!....Read more...
Document Controller £28,000 per annum | Liverpool | Full-time, Permanent We are seeking an experienced Document Controller to join an international subsea solution business from their HQ based in Liverpool. In this role you will manage documentation related to major projects, procurement, quality assurance and tenders for the business.Role Responsibilities
Carry out documentation control function and project administration for the NW site in support of administration needs of the business.
Assistance of compiling tender packages.
Assistance of quality assurance and quality control of project documentation.
Assist in the procurement process of purchase orders and requisitions.
Compilation and preparation of project work packs (including supervisor packs)
Control and issue of all project related documentation
Ensuring consistency in document presentation
Format documents for client submissions.
Generating and maintaining of Master Document Registers.
Issue internal transmittals.
Issue transmittal documents and record document transactions with clients.
Liaise with clients during drafting of procedures.
Liaise with project managers to co-ordinate project requirement ad hoc
Log and file DPRs
Log purchase requisitions
Person Specification
Demonstrable experience in document control and data processing
Strong administration skills.
Excellent Microsoft Office skills – Outlook, Word, Excel.
Competent communicator
Further Information
Working Hours: 08:30-17:00
Hybrid Working 3 Days Office, 2 Days Remote.
Office based in Liverpool
Wish to apply? Send a copy of your CV to Anna Curtis at Insignis Talent – ....Read more...
Quality Manager
Beckenham
£49,000 - £57,000 + Travel + Variety Of Work + Competitive Pension + Stability + Frequent Pay Reviews + Family Feel Environment + ‘Immediate Start’
Looking for variety and the chance to work on interesting niche projects? If so, this Quality Control Manager opportunity is everything you are looking for. Join a family feel environment with a company who will offer you security and stability for the long term.
Work closely with the Managing Director in your role as a Quality Manager Role but be heavily involved within the engineering and production team. Have the chance to travel across the world while receiving a great package and being valued for the work you do.
This Quality Manager Role Will Include:
* Working With The Engineering / Production Team* Managing Quality Control * Documentation* Travel Across The Globe (Occasionally)
The Successful Quality Manager Will Have:
* Engineering Background - Mechanical Bias* Aerospace, Healthcare / Metrology Background - Desired* Design Experience* Commutable to Beckenham If interested, please apply or contact Charlie Auburn on 02038137949 for immediate consideration
Keywords: Beckenham, Kent, Bromley, London, South London, South East London,Quality Control, Quality Manager, Quality, Quality Control Manager, Aerospace, Engineering, Actuators,Healthcare, Metrology,
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Director of Assurance, SBTi Services Limited Location: Japan, China, Germany, South Africa, United States, or Mexico About the role: SBTi Services Limited is looking for a Director of Assurance given the new separation between Science-Based Targets initiative (SBTi) and target validation function which is now SBTi Services Limited. As the Director of Assurance, you will play a critical role in ensuring SBTi Services Limited’s projects and validations adhere to SBTi Standards and best practices in global economy decarbonization. You will create the conformity assessment process from the ground up, providing assurance that the programs meet the highest levels of quality, credibility, and effectiveness. About the team: With an established quality control function already in place, the assurance team have already prepared many of the fundamental processes and documentation. The primary internal stakeholder is the Target Validation Team who are technical experts and whose function is to conduct target validations and deliver results on corporate and financial institution’s climate targets against SBTi Standards. Key responsibilities include: Develop and implement robust conformity assessment frameworks to evaluate the alignment of validations against the relevant standards and guidelines;Establish and maintain quality assurance procedures to ensure the accuracy, reliability, and integrity of data, reports, and deliverables produced by SBTi Services Limited;Monitor compliance with the Quality Control Manager including regulatory requirements, industry standards, and internal policies. Provide guidance and support to the wider SBTi Services Limited teams to address non-conformities or gaps identified;Collaborate with external stakeholders including regulatory bodies, certification agencies, partner organisations, and industry experts for best practices with emerging standards and best practices in decarbonization;Support the Quality Control Manager to provide training and capacity-building programs to staff and partners on conformity assessment methodologies, standard compliance, and quality management principles;Identify and mitigate risks related to conformity assessment processes, ensuring that potential threats to validation integrity and credibility are proactively address with the Quality Control Manager;Drive continuous improvement initiatives through the validations and other projects to enhance efficiency, effectiveness, and transparency of assurance processes, incorporating feedback and lessons learned into organisational practices.Essential skills and experience needed: Bachelor’s degree in environmental science, sustainability, or a related field;At least 10 -12 years of demonstrated experience in assurance, auditing, or quality management roles, preferably in the context of climate action;Strong understanding of international standards and framework related to climate change mitigation, adaptation, and sustainability (ex: ISO 14001, GHG Protocol, etc);Demonstrated experience in developing and implementing conformity assessment programs, preferably within the NGO or certification industry;Excellent project management skills, with the ability to manage multiple tasks and priorities effectively;Proven leadership and team management skills, with a track record of building and motivating high-performing teams.Desirable criteria: Second language fluency;Familiarity with corporate greenhouse gas emissions targets and current best practice in Greenhouse Gas Protocol Standard application;Experience working in global organizations and /or contexts;Experience working in remote teams and across time zones.How to apply:Please contact Kris Kobi, Associate Director at Climate17 - kris@climate17.com, or respond to this advertisment. This is a full-time role based in the SBTi partner organization office in Japan, China, Germany, South Africa, the United States, or Mexico. The salary for this role will be dependent on location and level of experience. This role is a fixed-term contract for 12 months. This is because of the Interested candidates should be legally allowed to work in the countries specified. The SBTi cannot sponsor any working visas.....Read more...
Senior Software Engineer; Medical Devices; Product Design;
Software Engineers will be involved in collaborating with internal departments such as Sensors to design and implement software components for both new and existing advanced in-house systems, aimed at enhancing manufacturing efficiency and quality control. This involves troubleshooting and resolving existing technical issues, as well as innovating new features.
Writing, technical software documentation (e.g. user guides, design documents).
Keeping up to date with the latest developments in relevant technologies and methodologies.
Software Engineers will have some of the following experience3+ years of experience designing medium-large scale applications involving hardware integration in LabVIEW.Certified LabVIEW Architect (CLA). 1+ years of experience working within a scrum framework as part of an agile implementation.1+ years of experience working with source code control, specifically Git.Experience working with motion control systems.Experience working with National Instruments (NI) hardware.Working within a lead....Read more...
We are currently seeking a skilled and detail-oriented individual to join our team as a Quality Controller. In this role, you will play a crucial part in the post-repair process, ensuring that vehicles leave our facility in pristine condition. Your responsibilities will include flatting and polishing vehicles, conducting quality control checks, valeting repaired vehicles, and providing excellent customer service.
• Flat and polish vehicles after repairs. • Perform full valeting of repaired vehicles. • Conduct quality control checks on repaired vehicles. • Collect and deliver customer vehicles. • Collect and deliver courtesy cars. • Check and adjust fluid levels, fuel, oil, water, antifreeze levels, etc. • Inspect vehicles for defects and maintenance issues (e.g., bulbs, tires). • Check vehicles in and out from hire with customers. • Carefully inspect vehicles for damage and missing parts. • Ensure paperwork is completed correctly and signed by the customer. • Drive/shunt company vehicles around the yard safely and courteously. • Use diagnostic equipment to fault scan vehicles (Training Provided). • Provide exceptional customer service and overall experience.
....Read more...
An exciting job opportunity has arisen for a Lead Quality Verification Engineer to join a globally recognised organisation involved within the exciting technology sector of battery and power supplies, based at their site in Crewkerne, Somerset.
Due to continued growth my client in Crewkerne, Somerset is seeking a Lead Quality Verification Engineer to lead the Quality team to ensure that products and processes are maintained in line with Business and Customer requirements
Duties of the Lead Quality Verification Engineer job include:
Managing the day-to-day activities and priorities of the QV Engineering team, in line with business requirements
Setting goals and objectives for the team, holding 1-2-1 and team meetings
Developing the skills and knowledge of the team, career path and succession planning
Responsible for the QV Team on Work Instruction Control, Engineering changes and testing of new designs to relevant industry standards
Taking the lead on FMEAs and control plans
Act as the link between the Quality and Engineering Departments
Key skills and experience for the Lead Quality Verification Engineer job are:
Ability to read and interpret design requirements, drawings and electronic circuits
Ability to initiate, plan, organise, implement and deliver programmes of work to tight deadlines
Significant experience within an engineering/manufacturing environment
Verification and Validation test planning and reporting
Providing recommendations for process improvements
Six Sigma experience
Experience of Product Part Approval Process
This is an exciting job opportunity for a Lead Quality Verification Engineer to progress their career with a financially strong progressive mid-sized electronics company that is part of a global group.
To apply for the Lead Quality Verification Engineer job based in Crewkerne, Somerset please send your CV and covering letter to LPhillips@redlinegroup.Com or for more information contact Lewis Phillips on 01582 878880 or 07961158784.....Read more...
Firmware developer required to program in Embedded C, C++ and Python for bare metal, real time or Linux environments.
Key skills:
Significant experience developing firmware
C/C++ or Python.
Software testing for quality control
JOB DESCRIPTION
Tremco Construction Products Group brings togetherTremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Kettle Operator is responsible for processing Tremco Sealants and/or Roofing products by carefully reading and following the process order card. The operator is responsible for area readiness to produce which includes safety and collection and preparation of materials like pails, drums, and other chemical raw materials. One batch is complete the operator will test for quality, adjust as needed to assure specification is met by following written standard operating procedures, and then fill product into specified packaging and palletize pails or drums.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Control or operate chemical processes or systems of machines using control boards, Human Machine Interface (HMI computer touch screen) or semi-automatic equipment. Draw samples of products, and conduct quality control tests to monitor processing and ensure that standards are met. Use appropriate scales or measurement devices to add materials to the kettle as specified by batch process orders. Must be able to read and understand recording instruments, pressure gauges, scales, flow meters, panel lights, and other indicators to verify the conformity of process conditions. Monitor control settings and make necessary adjustments on equipment. Accurately record production and downtime via written documentation.
EXPERIENCE: No prior experience is required.
OTHER SKILLS AND ABILITIES:
Basic Computer Skills required (Windows Familiarity). Lean and VFM (Visual Factory Management) skills and/or willingness to train. Ability to manage multiple priorities. Effective team player, self-motivated, quick learner. Ability to read, write and comprehend the batch-making processes. Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to stack 30-pound boxes in high-frequencies. Ability to lift up to 60-poundpailsusing mechanical assistance and teamwork.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Apply for this ad Online!....Read more...
Catfoss Recruitment Ltd are currently in partnership with a cutting-edge technology company that is looking to recruit a Quality Engineer to their expanding team on a permanent basis.Building on more than two decades of science led research and development, our client designs and manufactures pioneering power generation technology.Quality EngineerAs a Quality Specialist, you will form part of the Quality Team which has overall responsibility for ensuring that the whole product development process and final product manufacturing meets our high quality and safety standards.Uphold the safety policies and be responsible for performing inspections on products at various stages of production, carrying RCCA activities for non-conforming product, ensuring customer/regulatory standards are being met, compliance to quality standards are followed.Carrying out inspections and investigations, reporting and presenting findings to key stakeholders taking ownership of Non-Conformity Reports, from identifying route cause to seeking solutions and implementing them. You will need to be competent in applying Statistical Process Control (SPC) Measure System Analysis (MSA), 8D Problem Solving Processes and Gage Repeatability & reproducibility (G R&R). You will be expected to follow 5S principles and Health and Safety policies and related procedures.You will liaise and visit suppliers as required, engage with external stakeholders, and represent our values. Understand and communicate issues and complete measurement comparisons feedback to ensure that the “Quality” voice is heard within the business.Quality Engineer - Responsibilities• Take ownership of Non-conformance reporting process (NCR) - Raise, Log, investigate route cause, take and record measurements and collate data, co-ordinate relevant technical and departmental input, and steer them towards solution implementation. Liaise with non-conformance owners (Internal and external) – to coach and guide to conclusion• Ensure segregation of NCR items from ‘Good’ product. Apply 8D, MSA and SPC protocols as required• Raise Non-conformance reports (NCR) as required• Facilitate control items raised to NCR via segregation from good product• Accurate and timely performance of validations, verifications, and inspections; always exploring route cause and highlighting quality concerns appropriately, produce and share recorded findings such as but not limited to• In-process inspections at key areas of the production line• Perform dimensional and visual inspections on machined parts• Complete final QC inspections of parts and assemblies via visual and measurement tests• Present out results of investigations to internal and external stakeholders• Programme the virtual Machine Monitor (VMM) ensuring effective use and accurate output• Complete capability studies and GR&R. Record and report findings, including supporting data and solutions. Purchase appropriate gauging equipment, if required• Complete and record accurate measurements. Provide measurement support and be involved with improvement projects (Supplier, Company and Customer)• Author technical reports and complete technical file, drawing from internal and external stakeholders where required• Record data on all new procedures performed for new parts• Write work instruction for specific tasks• Participate in the regular Materials Review Boards (MRB)• Identify and escalate manufacturing issues to Team Leader and/or Supervisor, participate in resolution process• Achieve set productivity targets and identify ways of improving productivity• Prepare documents ready for start of production (and train out where appropriate)• Be a technical point of contact for quality issues to give guidance/support to get concerns resolved internally• Identify potential failure modes as early as possible in the project i.e. Plan for Quality• Work with Production and Design teams on Process DFMEA (Design Failure Modes Effects Analysis) and DFM (Design for Manufacture) system• Compile documentation to evidence Quality Planning activity, ensure that documents are prepared to support start of production• Identify where Poke yoke systems/methodology can be implementedAbout YouQuality Engineer - Knowledge and Experience• Engineering qualification (HND or Degree) preferred.• Experience with ISO9001 (IATF16949 or AS9110 preferred• Minimum 5 years' experience in a similar role• Formal Quality Control or Quality Assurance training preferred• Auditing qualification (Preferably Lead Assessor)• Clean Driving licenceKnowledge of or capacity to learn:• Measuring equipment Vision Measuring Machine, Comparator, Polyworks (VMM/CMM) (Including programming), Vernier, micrometres height gauges, bore gauges, thickness checking, surface finish, Gauge R&R and SPC, Minitab• Geometric Dimensioning and Tolerance• Problem-solving tools (8D, cause & effect, pareto, PPS, QOS/4panel etc…)• Ideally Green belt trained• 3D measurement• Quality planning and defect prevention tools (Poke yoke / FMEA / Control plans)• ISO9001 management systems• Supplier development• ERP / MRP system• Working in a manufacturing / engineering environment - mechanical or electrical systems• Reading and following engineering drawings and technical specificationsPlease apply ASAPDue to current high volumes of applications to our advertised jobs, we are unable to respond to every application. All successful candidates will be contacted as soon as possible.....Read more...
JOB DESCRIPTION
Summary/Objective:
The Sr. Quality Assurance Associate has accountability of internal and external quality standards as required for GMP and ISO to support Kirker's Quality Program. This position will work with all related internal functions (Regulatory, Production, QC, R&D, Supply Chain, and Customer Service) to ensure Kirker's Quality Assurance compliance via documentation, data, procedures, and QA support.
Defined Job Responsibilities/Accountabilities:
Maintain internal quality program to ensure ongoing compliance while refining the existing and implementing new quality standards to support the continuous improvement of the company's procedures, standards, and specifications. Working closely with the QC Department (both in the U.S. and our European facility) to ensure the testing methods, procedures, and record keeping support the best quality and consistency across the company globally. Conducts quality audits, inspections, and implements corrective actions. Performance Monitoring and Reporting including ownership and oversight of all customer-centric quality issues including complaints (investigation and resolution), product recalls and customer audits. Ensure compliance with all training, procedures, calibration, record keeping, and documentation requirements supporting Kirker's Quality Program. Lead and conduct objective root cause analysis for internal and external quality issues as well as customer concerns. Actively promotes and drives a culture that creates a safe working environment for all employees. Prepares reports and gives technical presentations as required. Provides support to Quality Control as necessary. Performs other duties as assigned.
Required Skills/Abilities:
Excellent verbal and written communication skills. Excellent interpersonal and customer service skills. Excellent organizational skills and attention to detail. Excellent time management skills with a proven ability to meet deadlines. Strong analytical and problem-solving skills
Qualifications:
Bachelor's degree in science required. 3-5+ years of relevant industry quality experience with supervisory experience a plus cosmetics and/or personal care preferred. GMP & ISO Certification Qualification experience a plus
ABOUT US
Kirker is a custom manufacturer of nail lacquer and nail care treatment products since the 1940's that has evolved into a full turnkey operation. We are proud to offer our services in filling and packaging from free standing stock to beautifully designed packaging options and displays. With manufacturing operations in the United States and Europe, we offer the right option to fit each customer's individual requirements. Kirker offers a full range of services from product development, R&D, production, and quality control, to filling and pack off. Our cutting-edge expertise, custom formulations, and first-class service have affirmed our leadership position within the industry.Apply for this ad Online!....Read more...
Bodyshop Manager:
- Salary: in the region of £50,000 plus bonus and car allowance
- Hours: 45 hours, Monday to Friday
- Pension, Staff Discounts, Life Assurance
Our client, a busy Bodyshop/Accident Repair Centre in Edinburgh are currently looking for an experienced Bodyshop manager.
Roles and Responsibilities for the Bodyshop Manager role:
- Manage activities of the production/workshop operations to ensure efficient work scheduling
- Implement/manage work processes to ensure quality/service levels meet or exceed expectations
- Hold daily production meetings to ensure work completion targets with team leaders, parts and reception staff
- Identify training and development needs and (subject to approval) implement required training and/or coaching
- Quality Control checks before returning to the customer
Skills and experience required as a Bodyshop Manager:
- Previous experience in a similar role or as a Workshop Control is required for this position
- A team player approach is essential
- A strong leader, who will lead their team to produce a result in terms of customer service, efficiency, and profit
- You will have a clear understanding of modern repair processes and techniques, also an eye for driving sales opportunities combined with strong interpersonal skills
If you want to hear more about the Bodyshop Manager role, please send us your CV by clicking apply now or by contacting Richard on 07590309374 / richard@holtrecruitment.com to discuss further.
Bodyshop Manager £50,000 Bodyshop Edinburgh
Bodyshop Manager, Site Manager, General Manager, Workshop Manager,....Read more...
My client based in the Huddersfield area, a leading global organisation within the engineering industry, are currently looking to recruit a Document controller/ Quality administrator to join their team on a 12month fixed term contract basis.
Offering unrivalled opportunities to work within a global world class engineering environment, supported with training, career development and long term job security.
The position offers free car parking, an excellent pension scheme / benefits package and the highest known such remuneration for this type of vacancy in Yorkshire and surrounding areas.
Document controller/ Quality administrator
As a Document Controller/ Quality administrator you will be required to inspect incoming Material and approve certification and check against the relevant standards laid out in the Material drawing and internal quality systems. Process this through SAP and control the documentation electronically and hard copies to ensure full trace-ability for the parts.
Key responsibilities:
Determine if product or part is in conformance with specifications.
Mark items for acceptance or rejection.
Confer with procurement about inspection results.
Identify non-conforming material/product and take appropriate action.
Ensure that materials supplied by contractors and producers meet standards and comply with specifications.
Effective daily use of site systems including SAP or other MRP systems.
Excellent IT Skills, including PowerPoint, Word, Excel
Ensure all reports, daily checks and documentation are completed accurately, in a timely manner and non-conformance's are reported and actioned on a daily basis.
Skills and experience:
Experience in Material certification approval
Experience in Quality Control and Inspection in a manufacturing environment
Good knowledge of quality management systems and in conducting Internal Audits.
Ideally be able to read and understand various instructions, routings, drawings and procedures
Experience in a discipline of all or some of the following – Materials verification, Metallurgy, Heat treatment, Material testing.
Whats on offer:
Competitive salary
Company pension
25 days holiday plus 8 bank holidays
Onsite Gym and car park
World class processes and brand new modern facilities
....Read more...
INSTRUMENT AND CONTROLS ENGINEER - PERMANENT - HERTFORDSHIREA biotech organisation based in Hertfordshire are looking for an Instrument and Controls Engineer to join their engineering team on a permanent basis. Reporting to the Engineering Manager, you will be responsible for providing your instrumentation and controls expertise across manufacturing, quality control and facilities on site as well as identifying, finding solutions and supporting the development of processes and systems. You will work closely with teams across engineering to support maintenance, asset management and continuous improvement activities on across utilities systems such as HVAC, medical gases and analytical equipment. You will be responsible for writing, reviewing and updating maintenance procedures for equipment and systems and work with the site QMS (quality management system) to manage deviations, change controls and CAPA's (Corrective And Preventive Action). You will manage on site contractors ensuring they are working in a compliant manner at all times.Successful candidates will have proven experience in providing instrumentation / calibration support across utilities systems such as HVAC, medical gases and analytical equipment within a similar GMP environment i.e. pharmaceutical, biotechnology, petrochemical or chemical manufacturing. Candidates will hold professional engineering qualifications within an engineering discipline and will have a strong electrical / electronics background with process control skills. To apply for this role please click the 'Apply Now' button or email your updated CV to Rebekah@blackfieldassociates.com
STR Limited is acting as an Employment Agency in relation to this vacancy.....Read more...
Job Title: Production Manager (Central Production Unit)Location: Wembley, LondonSalary: £45,000Join one of London’s most innovative grab & go food brands, dedicated to delivering outstanding quality and service. Located in Wembley, our Central Production Unit (CPU) is the heart of this operation.We are seeking a dynamic and experienced **CPU Manager** to lead this central production kitchen. You will oversee all aspects of production, ensuring the highest standards of food safety, quality, and efficiency. This is a pivotal role where your leadership will directly impact the success and growth.Responsibilities of the Production Manager
Manage day-to-day operations of the CPU, ensuring timely production and distribution of food products to various outlets.Lead and develop a team of chefs, kitchen staff, and logistics personnel, promoting a positive and productive work environment.Implement and maintain strict food safety and hygiene protocols in accordance with HACCP and food law regulations.Optimize production processes for maximum efficiency without compromising on quality.Collaborate with the R&D team to scale up new products from development to full production.Manage budgets, forecast production needs, and control inventory to meet business goals.Work closely with the supply chain to ensure timely sourcing of ingredients.Generate regular reports on production output, staff performance, and quality control measures.
The right Production Manager
Proven experience in a managerial role within a food production or kitchen environment.Strong leadership skills and the ability to manage, motivate, and develop a large team.In-depth knowledge of food safety regulations and HACCP certification.Excellent organizational and problem-solving skills.Ability to work under pressure in a fast-paced environment.Relevant culinary qualifications or equivalent practical experience.
Job Title: Production Manager (Central Production Unit)Location: Wembley, London** Salary: £45,000....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: Operates industrial blenders in accordance with established production schedules.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment. Reads and follows work orders and formulas to meet production specifications and schedules. Examines materials, ingredients, or product per quality standards. Weighs or measures materials, ingredients, and products per requirements. Adds and mixes raw materials according to specifications. Transfers materials, supplies, and products between work areas. Discharges blenders of powder when necessary. Ensures quality and conformity of blended products to meet standards. Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs. Completes cleaning logs and notifies quality control for hygiene testing. Records operational and production data on specified forms/production documents. Reports malfunctions to a supervisor and confirms proactive and routine maintenance. Conducts on-going assessment of quality control and operational procedures. Meets and/or exceed production goals and guidelines for daily/weekly production runs. Observes plant safety rules and regulations at all times, reports all safety hazards in a timely manner. Other duties as assigned.
EDUCATION: No formal educational requirement.
EXPERIENCE: No prior experience or training necessary.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage. Demonstrates accepted ethical and professional business behavior. Executes ISO authority and responsibility. Completes and maintains all required training. Reports suspected violations including those of a business associate. Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS: Incumbent must be able to sit, stand, walk, climb, kneel, use hands, reach, talk, hear, smell, and lift up to 50 lbs. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
JOB DESCRIPTION
Quality Control Tech:
The QC Tech works in a production setting ensuring product quality at various stages of processing. Testing product samples is performed using various types of lab equipment. The ability to multi-task and complete testing in a timely manner is essential in order to expedite production. Our QC Tech \"Pay for Skills Program\" is a defined career path that provides opportunity to advance in your position and increase compensation based on skill level. To find out more apply today! Preferred Skills: Quality Control experience is an ISO environment Good math skills. Self-motivated with attention to detail. Excellent communication skills. Accurately enter and retrieve computer data. Ability to solve problems in a team environment. Willing to work overtime as required. Job Type: Full-time Pay: $13.50 - $15.50 per hour. This position is bonus eligible.
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401(k) matching Employee Stock Purchase Plan Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Referral program Tuition reimbursement Vision insurance Pension Schedule: 8-hour shift 1st Shift Monday - Friday,6 am-2:30 pm 2nd Shift, Monday - Friday, 2 pm- 10:30 pm 3rd Shift, Sunday-Thursday, 10 pm- 6:30 am TCI is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online!....Read more...
A very exciting opportunity for an Image Sensor Engineer has arisen with my client in North London.
This is an amazing new opportunity for an Image Sensor Engineer, based in North London to work for an exciting start-up company specialising in the design and manufacture of semiconductor wafer scale imaging devices for the medical sector.
The Image Sensor Engineer, North London, will sit in the R&D team and perform a key role supporting the development, characterisation and quality control of image sensors and flat-panel X-ray detector panels. You will also hold the following responsibilities:
Working directly with the semiconductor design team: creating test methods, plans and reports for new image sensor products.
Working within the engineering team: measurement, characterisation, and data analysis of test results for image sensors and X-ray detectors.
Working with the manufacturing team: design of image quality control processes, liaison with suppliers and subcontractors, setting up and managing a production database.
The ideal Image Sensor Engineer, based in North London, will have previous experience within a similar role and will have experience with Photonics, optical sensors and have experience in image analysis using Matlab and ImageJ.
APPLY NOW! For the Image Sensor Engineer, based in North London, by sending a cover letter and CV to TDrew@redlinegroup.Com or by calling Tom Drew on 07961 158762. Otherwise, we always welcome the opportunity to discuss other roles similar to Design roles on 01582 878 848.....Read more...
Position: CNC MillerSalary: Up to £40,000 depending on experienceHours: Monday to Thursday, 8am to 5pm; Fridays, 8am to 2pmLocation: Huntingdon Job Description:Are you a proficient CNC Miller seeking a fresh opportunity? Our client, a reputable Engineering & Technology firm with over 40 years of industry expertise, is actively searching for a CNC Miller to join their skilled manufacturing team. In this role, you'll play a crucial part in setting up and operating various CNC milling machines, including those with up to 5 axes, to produce top-quality precision machined components. The working hours are Monday to Thursday from 8am to 5pm, and Fridays from 8am to 2pm. Key Responsibilities for the CNC Machinist: · Crafting precision components from diverse raw materials to meet the precise specifications outlined in engineering drawings.· Ensuring the manufactured components adhere to strict quality standards using appropriate measuring equipment and conform to the individual component Inspection Schedule.· Setting up and running CNC milling machines equipped with Haas/Fanuc-based CNC control or DMGMORI's CELOS (Siemens-based) control.· Adhering to the company's Quality Management and Health and Safety protocols.· Delivering quality output within set timelines. Candidate Profile: · Completion of a Mechanical Engineering Apprenticeship.· Prior experience in a precision engineering environment is essential.· Proficiency in interpreting engineering drawings and utilizing various measurement equipment.· Proven experience as a CNC Miller, preferably with expertise in 5-axis machining and machining castings.· Meticulous attention to detail.· Ability to thrive in a fast-paced environment with tight deadlines. Benefits: · An excellent working environment where performance, engineering, and technology converge.· Competitive remuneration with attractive overtime rates.· Generous annual leave entitlement of 32 days (inclusive of bank holidays).· Provision of branded workwear.· Participation in the company pension scheme.· Access to Critical Illness and medical cashback plans.· Death in Service coverage.· On-site gym facilities.· Free parking on-site.....Read more...
HEAD CHEF – HIGH PROFILE NEW VENUE OPENING, KUWAIT!As a Head Chef specializing in Levantine cuisine in Kuwait, your role would involve overseeing the kitchen operations, menu development, food preparation, and ensuring the quality and authenticity of Levantine dishes served in your establishment. Levantine cuisine, originating from the Levant region which includes countries like Lebanon, Syria, Jordan, and Palestine, is known for its rich flavours, diverse ingredients, and traditional cooking techniques.This Head Chef would then also need some experience in Mediterranean cuisine and be able to introduce these sorts of dishes on the menu too.Here are some key responsibilities and considerations for a head chef specializing in Levantine cuisine in Kuwait:Menu Development: Create a diverse menu that showcases traditional Levantine dishes while also incorporating modern twists and seasonal ingredients. Offer a range of appetizers, main courses, and desserts that highlight the flavours and culinary heritage of the Levant region.Ingredient Sourcing: Ensure the availability of high-quality ingredients essential for Levantine cooking, such as olive oil, herbs, spices, grains, legumes, and fresh produce. Source authentic ingredients imported from the Levant region or locally sourced alternatives that meet the same standards.Culinary Expertise: Possess in-depth knowledge and expertise in Levantine cooking techniques, such as grilling, roasting, braising, and baking. Be familiar with traditional spices and flavour combinations used in Levantine dishes, and be able to execute recipes with precision and authenticity.Quality Control: Maintain strict standards of quality and consistency in food preparation, presentation, and taste. Conduct regular tastings and inspections to ensure that dishes meet the expectations of customers and uphold the reputation of the restaurant.We are looking for a good Kitchen and Team Manager who is able to train the staff, control costs, work to budgets and create innovative menus.By fulfilling these responsibilities and embracing the richness of Levantine cuisine, you can establish yourself as a respected head chef in Kuwait's culinary scene, delighting diners with authentic flavours and memorable dining experiences.Salary Package: Negotiable and dependent upon experienceGet in touch: michelle@corecruitment.com....Read more...
JOB DESCRIPTION
The Process Engineer provides engineering support to the assigned program and/or area to ensure product is processed in accordance with customer and division quality requirements while maintaining production flow. Charged with developing and maintaining systems to assure that all products manufactured by the plant meet customer specifications and achieve superior and reliability levels. The resident-expert regarding process technology. Responsible for investigating and implementing new process technology at the plant. The Process Engineer is responsible for maintaining, upgrading, and optimizing the plant. This position is responsible for influencing the development of preventative maintenance programs at the facility and will have a significant role in capital improvement plans, while assisting in work area design, plant layout, visual control and metric implementation, material flow, process tracking, and communication.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Analyze statistical data and product specifications to determine standards and establish quality and reliability objectives of finished product Participate in plant metric reporting Coordinate quality control objectives and activities as detailed in the facility site plan to resolve any production problems that may occur, maximize product consistency, and minimize cost Prepare estimate of production costs and production progress reports for management Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations Use SAP to monitor production/business functions Provides engineering expertise for all operations in the plant Must be the local expert, regarding all manfacturing equipment and processes at the plant Recommend modifications to current processes and equipment; document and follow up with process engineers responsible for the modifications Works with the plant engineers and maintenance to influence direction of preventative maintenance best practices Support a high-performance results-oriented culture and maintain high standards of safety and compliance Provide technical and operational leadership for equipment and facility maintenance and improvements Deliver disciplined project management and product development assistance Regular review of batch first pass yield, felt production quality, distressed, obsolete, scrap and returned material Troubleshoot batch and raw material issues Assist in the identification of capital requirements for the facilities' annual capital plans and budgets Help investigate equipment failures, difficulties, and deficiencies Interface with leadership, operators, and maintenance to ensure continuous improvement and continuous production Develop and streamline their critical metrics and assist when necessary Assist in the development of site metrics and KPI's Perform job in accordance with all Tremco safety policies and procedures Perform other duties, as assigned
The salary range for applicants in this position generally ranges between $65,000 and $80,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Commission, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: Operates industrial blenders in accordance with established production schedules.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment. Reads and follows work orders and formulas to meet production specifications and schedules. Examines materials, ingredients, or product per quality standards. Weighs or measures materials, ingredients, and products per requirements. Adds and mixes raw materials according to specifications. Transfers materials, supplies, and products between work areas. Discharges blenders of powder when necessary. Ensures quality and conformity of blended products to meet standards. Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs. Completes cleaning logs and notifies quality control for hygiene testing. Records operational and production data on specified forms/production documents. Reports malfunctions to a supervisor and confirms proactive and routine maintenance. Conducts on-going assessment of quality control and operational procedures. Meets and/or exceed production goals and guidelines for daily/weekly production runs. Observes plant safety rules and regulations at all times, reports all safety hazards in a timely manner. Other duties as assigned.
EDUCATION REQUIREMENT: No formal educational requirement
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage. Demonstrates accepted ethical and professional business behavior. Executes ISO authority and responsibility. Completes and maintains all required training. Reports suspected violations including those of a business associate. Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 75 lbs.
BENEFITS AND COMPENSATION: The hourly rate/salary range for applicants in this position generally ranges between $15.85 and $18.98 . This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
