Vehicle Technician - Prestige Dealership £30,000 with an OTE £45,000 Tamworth
We are working with a franchised dealership in the Tamworth area who are looking for an experienced Technician to join their busy Service Department in Tamworth.
The Technician role comes with a basic salary of £30,000 with an OTE £45,000 with fantastic opportunities for progression.
- Hours: 40
- OTE £45,000
- Staff Car Scheme
- Competitive Pension Scheme - Company Pays up to 4%
- Perk Box Membership
- Eye care Vouchers
- Life Assurance - 4 x Salary
- Employee Assistance Programme
- On site parking
- 23 days holiday rising to 25 after 2 years
- Cycle to work scheme
Key Technician Roles and Responsibilities:
- Undertake maintenance, service, and repair activities on motor vehicles to the highest standard
- Carry out all work completely and effectively whilst adhering to manufacturers scheduled times to maintain efficiency
- Effectively record details of diagnosis, work completed, and components utilised in line with group and manufacturer standards
- Keep work areas clean and tidy, organised, and safe from hazards to health and safety
- Be able to liaise effectively with colleagues and customers at all levels in a polite and efficient manner
- To be aware of the importance and implication of maintaining high levels of customer satisfaction and work to ensure they are always met
Minimum Technician Requirements:
- Qualified to NVQ level 3 (or equivalent)
- Have at least 2 years experience after a qualifying period, of working in a Dealership as a Technician (or similar)
- Excellent customer service skills
- Good technical knowledge
- Must have a Driving License
- The ability to work without supervision
- Take responsibility for the quality and quantity of their work
If you want to hear more about the Technician role, please send us your CV by clicking apply now or by contacting Mark Roberts on 07519 070576 or mark.roberts@holtrecruitment.com
Vehicle Technician - Prestige Dealership £30,000 with an OTE £45,000 Tamworth ....Read more...
Vehicle Technician - Maidstone - Vehicle Technician
Location - Maidstone
Job Title - Vehicle Technician
Salary - £30,000 - £33,000 - OTE £50,000 (Uncappped)
We have an exciting opportunity for an experienced Vehicle Technician to join a prestige dealership in Maidstone.
The Vehicle Technician role comes with a basic salary of £30,000 - £33,000 plus OTE £50,000 Which is uncapped
with fantastic opportunities for progression.
Permanent, Full Time, Hours: 45hrs per week 8am to 6pm with half hour lunch. 1 in 5 sats (half days) paid as overtime
Benefits below:
- 33 days annual leave, Increases with length of service.
- Your birthday off
- Long service recognition
- Employee Assistance Programme
- Eyecare vouchers
- Healthcare cash plans
- Critical Health cover
- Pension scheme
- Car purchase schemes
- Discounts on servicing / parts
- Enhanced maternity, paternity, adoption leave and shared parental leave
- Paid compassionate leave
- Life assurance
Key Vehicle Technician Roles and Responsibilities:
- Undertake maintenance, service and repair activities on motor vehicles to the highest standard
- As the Vehicle Technician you will carry out all work completely and effectively whilst adhering to manufacturers scheduled times to maintain efficiency
- Effectively record details of diagnosis of Vehicles, work completed, and components utilised in line with group and manufacturer standards
- Keep work areas clean and tidy, organised and safe from hazards to health and safety
- Be able to liaise effectively with colleagues and customers at all levels in a polite and efficient manner
- To be aware of the importance and implication of maintaining high levels of customer satisfaction and work to ensure they are met at all times
Minimum Vehicle Technician Requirements:
- Qualified to NVQ level 3 (or equivalent)
- Have at least 2 years experience after a qualifying period, of working in a Dealership as a Vehicle Technician (or similar)
- Excellent customer service skills
- Good technical knowledge
- Must have a Driving License
- The ability to work without supervision
- Take responsibility for the quality and quantity of their work
If you want to hear more about the Vehicle Technician role, please send us your CV by clicking apply now or by contacting Rachael on 07885881841 or rachael.mortimer@holtautomotive.co.uk to discuss further.
Vehicle Technician Main Prestige Dealership Vehicle Technician ....Read more...
Quality Technician – Medical
Location: Welwyn Garden City (You will need to be able to relocate to Oxford in 2025)
Company: Join a dynamic team at a leading medical device company currently based in Welwyn Garden City. In February 2025 the company is moving into a brand-new flagship site based in Oxford.
This is an amazing opportunity to work for a company that change peoples lives for the better!
They are looking for someone who can come in and collaborate with cross-functional teams to ensure the quality assurance and compliance of products, materials, processes and documentation relating to medical device manufacture, goods in inspection, in process inspection and final product testing.
Key Responsibilities for this Quality Technician – Medical job are:
All aspects of manufacturing quality compliance (e.G. Goods in inspection, in process QC checks, final functional testing and analysing the results)
Reviewing batch records, ensuring error-free manufacturing and batch release
Creating/enhancing tooling descriptions, perform calibrations and ensuring calibration & maintenance log is updated and non-conforming tools removed from the manufacturing environment
Maintaining manufacturing KPIs, assessing the production process and creating quality checkpoints
Maintain quality system documentation including supplier records, purchase and manufacturing batch information
Support investigation, analysis and closure of relevant NCRs
Qualifications and Skills required for this Welwyn based Quality Technician - Medical job are:
A background in electronics and/or electro-mechanical assemblies is essential for this role, and experience with Quality management systems such as ISO13485, AS9100 or ISO9001
Electro-mechanical apprenticeship or similar higher education award in this or an associated area e.G., HNC, HND or Level 3 NVQ in a relevant area or higher desirable
Experience of electro-mechanical assemblies in medical device, aerospace, or defence sectors required
Experience in visual inspection and excellent eye for detail
Familiar with test/inspection equipment such as oscilloscopes, multimeters and digital callipers
Experience in Quality Control function such as inspection and measurement
Experience in highly regulated environment (healthcare, aerospace, defence)
How to Apply:
If you're ready to join our clients dynamic team and contribute to the advancement of medical technology, please submit your resume and cover letter to ndrain@redlinegroup.Com or call Nick on 01582878828 / 07961158760!....Read more...
Quality Assurance Technician
Based: Stoke-on-Trent
We are an international leader in the manufacture and distribution of small domestic products and appliances. Due to ambitious expansion and development plans, we are actively looking to appoint a Quality Assurance Technician to join our in-house QA Team.
Based at their site in Stoke-on-Trent, as a member of the Quality Assurance Team, you will be testing products, assessing function, performance and build quality within a Laboratory environment to ensure that the products are fit for market and meet the required standard for the brand.
This will involve; samples for assessment to include first samples, pre-shipment samples and stock samples tested and assessed following departmental procedures.
You will also be assessing returned products and establishing the reason for failure and will become familiar with UK & EU standards and legislation.
As a result, you will contribute towards the development of successful products by aiding the designers and engineers in the development stage through test reports, design input and root cause analysis of issues identified.
Ideally applicants will have previous experience of working in a test facility (either in-house or an external test house) or have hands-on experience of completing the QA testing procedure.
Ideally, candidates should have:
Hands on mechanical and/or electrical skills
Excellent attention to detail.
Good verbal and written communication skills.
Organised and structured with a drive for a clean, orderly, tidy and safe working environment.
Computer literate with good abilities with MS Excel & Word.
Enthusiastic with a ‘can do’ outlook.
An ability to get things done. Completes and finishes work with no loose ends.
The ability to work to tight deadlines under pressure and ability to handle multiple projects and priorities.
Able to work as part of a team or own initiative as required, and work with minimal supervision
Preferred but not essential:
Good understanding of Quality systems (e.g. ISO 9001)
Good understanding of relevant UK, European and International regulations standards, codes of practice and procedures (e.g. UKCA, CE, CCC, LVD, IP ratings, etc.)
Good experience of working in a technical test facility.
Minimum 1 years’ industry related experience in testing of products with mechanical, electrical, electronic & software elements.
Good experience of following detailed test requirements and protocols.
Good organisational skills with the ability to prioritise tasks and make confident decisions.
In return, we are able to offer an attractive salary and benefits package.
This role can be surmised as one that is very process-driven and product-focused. You must have good investigative skills with strong attention to detail; good organisational and time management skills, be motivated and able to work unsupervised; and have excellent communication skills.
When applying for this role, please indicate your current salary (plus benefits package), minimum salary required, notice period and your reasons for wishing to move from your current company. Alliance Consulting is acting as an employment agency in this respect. Alliance Consulting specialise in the placement of engineers throughout the UK. By sending us your CV you are explicitly consenting to our processing of your personal data on a computer database and/or in manual files for the purpose of evaluating your application for employment. This processing will be carried out in accordance with the UK Data Protection Act 1998. By applying for this role you hereby consent to us submitting your CV to our client. If you do not wish your CV to be sent to our client then you must clearly state this to us. Equally, if there are any companies that you do not wish your CV to be sent to (for whatever reason), then please let us know of this when you apply.....Read more...
BIM Technician
Location: London (Hybrid)
Salary: £40K - £55K + Excellent Benefits
The Client:
Our client is a well-established architectural consultancy, renowned for their commitment to quality, innovation, and diversity.
The Role:
As an BIM Technician, youll provide daily support in utilising Revit and AutoCAD software while also offering technical expertise to facilitate project delivery across different stages outlined by the RIBA.
Responsibilities:
* Conducting audits and ensuring adherence to standards, particularly contractual level / Stage 2 BIM requirements
* Maintaining project documents like BIM execution plan and master Information delivery plan
* Managing project Common Data Environments (CDE) using Aconex and BIM 360
* Assist in model management, encompassing planning, collaboration, and coordination.
* Supporting the maintenance, issuance, and integration of stakeholder models
* Collaborate closely with the Head of BIM to implement BIM standards, while also overseeing monitoring and training initiatives related to these standards.
* Coordinating clash detection meetings with the design team
Requirements:
* Previously worked in a role requiring advanced BIM expertise
* Understanding of UK BIM standards, encompassing BS EN ISO 19650 and PAS & BS 1192 suites.
* Knowledge of Autodesk AEC Suite, Revit, BIM 360, Navisworks, and Microsoft Office 365
* Skilled in BIM and delivering Government Soft Landings with COBie
* Associate / Chartered Architectural Technologist (Desirable)
* BIM Certification and knowledge of Twinmotion (Desirable)
Benefits:
* Flexible hybrid working options
* Study sponsorship with paid leave
* Cycle to work scheme
* Life assurance
* Virtual GP service
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: BIM Technician, BIM Coordinator, Architectural Technician, BIM Engineer, BIM Specialist, BIM, jobs
....Read more...
BIM Technician
Location: London (Hybrid)
Salary: £40K - £55K + Excellent Benefits
The Client:
Our client is a well-established architectural consultancy, renowned for their commitment to quality, innovation, and diversity.
The Role:
As an BIM Technician, youll provide daily support in utilising Revit and AutoCAD software while also offering technical expertise to facilitate project delivery across different stages outlined by the RIBA.
Responsibilities:
? Conducting audits and ensuring adherence to standards, particularly contractual level / Stage 2 BIM requirements
? Maintaining project documents like BIM execution plan and master Information delivery plan
? Managing project Common Data Environments (CDE) using Aconex and BIM 360
? Assist in model management, encompassing planning, collaboration, and coordination.
? Supporting the maintenance, issuance, and integration of stakeholder models
? Collaborate closely with the Head of BIM to implement BIM standards, while also overseeing monitoring and training initiatives related to these standards.
? Coordinating clash detection meetings with the design team
Requirements:
? Previously worked in a role requiring advanced BIM expertise
? Understanding of UK BIM standards, encompassing BS EN ISO 19650 and PAS & BS 1192 suites.
? Knowledge of Autodesk AEC Suite, Revit, BIM 360, Navisworks, and Microsoft Office 365
? Skilled in BIM and delivering Government Soft Landings with COBie
? Associate / Chartered Architectural Technologist (Desirable)
? BIM Certification and knowledge of Twinmotion (Desirable)
Benefits:
? Flexible hybrid working options
? Study sponsorship with paid leave
? Cycle to work scheme
? Life assurance
? Virtual GP service
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for th....Read more...
Our client is looking for an experiences Technician/ Senior Technician to join their Birmingham office. This client has 3 offices across England and are making expansion plans. This is an exciting role that will provide support and progression.
The ideal candidate will have relevant experience in a similar role of 3-5 years, with good knowledge of highway design. They will have experience in the drafting simple designs of both commercial and residential developments including access junction, infrastructure, drainage, standard details and traffic signs and road markings.
They will also have:
Knowledge and experience of highway design standards – DMRB, Manual for Streets and NRSWA.
Knowledge and experience of technical drafting and adhering to quality standards, be proficient in self-checking, and prides themselves on the quality of the outputs that they produce.
Knowledge of highway and drainage adoption processes and legal requirements for S278, S38 and S104.
Good understanding and use of software packages including AutoCAD, Civils 3D, KeySigns/Lines and Vehicle Tracking.
Good time management and organisational skills with the ability to maintain good records.
What’s on offer:
An attractive and modern working environment with good accessibility by all modes of transport
The opportunity to progress quickly within the firm.
A wide range of challenging projects
Ongoing support, training and mentoring from senior professionals within the business with a real commitment from senior management towards personal and professional development.
Competitive salary
25 Days annual leave plus the ability to purchase additional days.
Flexible working arrangements
Option to participate in the Company Share Ownership scheme.
Private healthcare
Cycle to Work Scheme, Techscheme
Payment of professional subscription
Membership of our group pension scheme, Life Assurance
....Read more...
Available now we have a number of Multi Skilled Engineer vacancies with a prestigious manufacturing company based in Deeside. The shift available is 4 on 4 off days and nights, paying a salary ranging from £47,000 - £49,500 per annum alongside a competitive benefits package including 30 days annual leave, overtime at 1.5 x , life insurance of up to 4 x basic salary and much more.
This century-old business is one of the major UK retailers and is renowned and well-loved for it’s consistent high-quality food produce. Training and progression opportunities are a high priority for this company and you will be given a clear progression plan and the chance to upskill yourself in areas you desire. You will be based at their state-of-the-art site in Deeside in a fast-paced and dynamic department where no two days will be the same.
Roles and Responsibilities as a Multi Skilled Engineer:
You will be responsible for dealing with both reactive and preventative maintenance across the whole site.
You will be involved with a variety of projects such as PPM, Continuous Improvement and New Machinery Installations.
Diagnose and resolve electrical and mechanical faults, machine emergencies or unplanned problems in a systematic and logical manner.
Develop and update Standard Operating Procedures for each machine.
I would love to see CVs from individuals who have:
One of the following qualifications: Level 3 in City and Guilds, NVQ or BTEC (Apprenticeship) in Electrical or Mechanical Engineering.
Knowledge in dealing with breakdowns on Manufacturing / Production Machinery such as slicers, conveyors, mixers, packaging machinery, ovens, check weighers to name a few.
Industry experience within one of the following areas: Food, Drink, Packaging, Print, Textiles, Plastics, Pharmaceuticals or any other fast-paced environment.
Worked previously as a Maintenance Engineer, Electrical Engineer, Multi Skilled Engineer, Mechanical Maintenance Technician, Shift Technician, Maintenance Technician, or Multi-Skilled Technician.
Benefits included as a Multi Skilled Engineer:
22 days holiday + 8 bank holidays
Retail discount cards
Overtime paid at 1.5 x
3% / 5% pension - can increase to 5% and 5%
Life Assurance - 1 x basic salary if not in pension / 4 x basic salary if in pension
Healthcare/Well-being access
Enhanced Family/maternity/parental leave
Subsidised staff canteen
Free parking
If you would like to find out more, please click apply or contact Megan Hepworth at E3 Recruitment on 0148 645269.....Read more...
JOB DESCRIPTION
*$1,000 Sign On Bonus
The QA Technical Service Rep is responsible for the timely delivery of services as they relate to the quality assurance of Tremco's installed roofing systems within their respective region.
$20-33/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Duties/Responsibilities, Core knowledge:
Lead Technician performing roof patch and repair as necessary and determined by the Quality Assurance Group on Tremco Incorporated roof systems (BUR, Modified Bitumen, Single Ply, Fluid Applied, etc.). Estimate material and labor quantities for roof patch and repair. Work with local WTI Field Representatives and/or Supervisors as required or necessary. Provide accurate and timely documentation to ensure that all work was completed properly and that the customer is fully satisfied. Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all work-related matters. Demonstrate working knowledge of all services provided. Perform any other duty and/or project as required or assigned by the QA Assurance Group.
Skills, Qualifications, Experience, Special Physical Requirements:
High school diploma or GED Prior roofing experience including patch and repair skills Knowledge and ability to use basic tools associated with commercial roofing Knowledge and experience monitoring and maintaining Quality Control Functional computer skills Safety training and OSHA knowledge with a commitment to safety at all times Understanding and ability to manage expenses Planning and organizational skills. Able to juggle multiple priorities and demonstrate good task management Work independently, as well as in a team environment, to solve problems and delegate assignments Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft) and carry basic hand tools, equipment and/or material up to approx. 100 lbs. over long distances Capable of walking along roof top edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc.) Ability to travel out of town including overnight travel Must have transportation and a valid driver's license Ability to work weekends and/or holidays if needed Ability to pass pre-employment drug test Ability to read, write and speak English The hourly rate for applicants in this position generally ranges between $20 and $33. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
JOB DESCRIPTION
The QA Technical Service Rep is responsible for the timely delivery of services as they relate to the quality assurance of Tremco's installed roofing systems within their respective region.
$20-33/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Duties/Responsibilities, Core knowledge:
Lead Technician performing roof patch and repair as necessary and determined by the Quality Assurance Group on Tremco Incorporated roof systems (BUR, Modified Bitumen, Single Ply, Fluid Applied, etc.). Estimate material and labor quantities for roof patch and repair. Work with local WTI Field Representatives and/or Supervisors as required or necessary. Provide accurate and timely documentation to ensure that all work was completed properly and that the customer is fully satisfied. Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all work-related matters. Demonstrate working knowledge of all services provided. Perform any other duty and/or project as required or assigned by the QA Assurance Group.
Skills, Qualifications, Experience, Special Physical Requirements:
High school diploma or GED Prior roofing experience including patch and repair skills Knowledge and ability to use basic tools associated with commercial roofing Knowledge and experience monitoring and maintaining Quality Control Functional computer skills Safety training and OSHA knowledge with a commitment to safety at all times Understanding and ability to manage expenses Planning and organizational skills. Able to juggle multiple priorities and demonstrate good task management Work independently, as well as in a team environment, to solve problems and delegate assignments Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft) and carry basic hand tools, equipment and/or material up to approx. 100 lbs. over long distances Capable of walking along roof top edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc.) Ability to travel out of town including overnight travel Must have transportation and a valid driver's license Ability to work weekends and/or holidays if needed Ability to pass pre-employment drug test Ability to read, write and speak English The hourly rate for applicants in this position generally ranges between $20 and $33. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
JOB DESCRIPTION
The QA Technical Service Rep is responsible for the timely delivery of services as they relate to the quality assurance of Tremco's installed roofing systems within their respective region.
$20-33/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Duties/Responsibilities, Core knowledge:
Lead Technician performing roof patch and repair as necessary and determined by the Quality Assurance Group on Tremco Incorporated roof systems (BUR, Modified Bitumen, Single Ply, Fluid Applied, etc.). Estimate material and labor quantities for roof patch and repair. Work with local WTI Field Representatives and/or Supervisors as required or necessary. Provide accurate and timely documentation to ensure that all work was completed properly and that the customer is fully satisfied. Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all work-related matters. Demonstrate working knowledge of all services provided. Perform any other duty and/or project as required or assigned by the QA Assurance Group.
Skills, Qualifications, Experience, Special Physical Requirements:
High school diploma or GED Prior roofing experience including patch and repair skills Knowledge and ability to use basic tools associated with commercial roofing Knowledge and experience monitoring and maintaining Quality Control Functional computer skills Safety training and OSHA knowledge with a commitment to safety at all times Understanding and ability to manage expenses Planning and organizational skills. Able to juggle multiple priorities and demonstrate good task management Work independently, as well as in a team environment, to solve problems and delegate assignments Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft) and carry basic hand tools, equipment and/or material up to approx. 100 lbs. over long distances Capable of walking along roof top edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc.) Ability to travel out of town including overnight travel Must have transportation and a valid driver's license Ability to work weekends and/or holidays if needed Ability to pass pre-employment drug test Ability to read, write and speak English The hourly rate for applicants in this position generally ranges between $20 and $33. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
JOB DESCRIPTION
The QA Technical Service Rep is responsible for the timely delivery of services as they relate to the quality assurance of Tremco's installed roofing systems within their respective region.
$20-33/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Duties/Responsibilities, Core knowledge:
Lead Technician performing roof patch and repair as necessary and determined by the Quality Assurance Group on Tremco Incorporated roof systems (BUR, Modified Bitumen, Single Ply, Fluid Applied, etc.). Estimate material and labor quantities for roof patch and repair. Work with local WTI Field Representatives and/or Supervisors as required or necessary. Provide accurate and timely documentation to ensure that all work was completed properly and that the customer is fully satisfied. Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all work-related matters. Demonstrate working knowledge of all services provided. Perform any other duty and/or project as required or assigned by the QA Assurance Group.
Skills, Qualifications, Experience, Special Physical Requirements:
High school diploma or GED Prior roofing experience including patch and repair skills Knowledge and ability to use basic tools associated with commercial roofing Knowledge and experience monitoring and maintaining Quality Control Functional computer skills Safety training and OSHA knowledge with a commitment to safety at all times Understanding and ability to manage expenses Planning and organizational skills. Able to juggle multiple priorities and demonstrate good task management Work independently, as well as in a team environment, to solve problems and delegate assignments Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft) and carry basic hand tools, equipment and/or material up to approx. 100 lbs. over long distances Capable of walking along roof top edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc.) Ability to travel out of town including overnight travel Must have transportation and a valid driver's license Ability to work weekends and/or holidays if needed Ability to pass pre-employment drug test Ability to read, write and speak English The hourly rate for applicants in this position generally ranges between $20 and $33. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
An exclusive opportunity has become available to work for a prestigious manufacturing company based in Malton, North Yorkshire working 4 on 4 off days only. You will be offered a fantastic benefits package including 33 days annual leave, life assurance of 2 x basic salary, and overtime paid at time and a half to name a few. This position is working a 4 on 4 off, days only shift pattern.
This multi-site food manufacturer is ever-growing with their high-quality produce distributed across the major supermarkets in the UK. Deep-rooted in British farming, this well-established company has ties with local and UK-wide farmers creating a strong relationship within the community. You will be given the chance to upskill yourself and undergo additional training and qualifications to further develop your career as a Multi Skilled Engineer.
Roles and Responsibilities as a Multi Skilled Engineer:
Daily repairs and maintenance of fast-moving food manufacturing machinery
Identifying areas for continuous improvements
Covering both reactive and planned maintenance across the site
Fault finding and using root cause analysis
Effectively using the PPM system and updating and keeping to the maintenance schedule
I would love to see CVs from individuals who have:
A relevant qualification such as a City & Guilds Level 3, NVQ Level 3 or BTEC Level 3 (Apprenticeship), in either Electrical or Mechanical Engineering.
Experience within a Food or FMCG manufacturing environment.
Previously worked as a Multi Skilled Engineer, Maintenance Engineer, Electrical/Mechanical Engineer, Multi-Skilled Technician etc.
Benefits included as a Multi Skilled Engineer:
Pension at 8% employer / 8% employee
33 days annual leave
Life assurance of 2 x basic salary
Overtime paid at time and a half
Free onsite parking
Subsidised canteen
If you would like to find out more, please click apply or contact Megan Hepworth at E3 Recruitment on 01484 645269.....Read more...
Are you an experienced Structural Technician who has keen eye to attention to detail? Do you have more than five years experience working for a UK based design consultancy? If so, we would love to hear from you!
Our is a leading firm in the structural engineering industry, specialising in innovative solutions and exceptional client service. They are currently seeking a skilled Structural CAD Technician to join their dynamic team. This is an exciting opportunity for an individual with experience in AutoCAD and a passion for producing high-quality structural engineering drawings.
What is on offer:
The chance to work for a multi-award design consultancy based in the heart of Cambridge.
Opportunity to work on a wide variety of projects including: residential, commercial and industrial.
Easy accessible public transport to and from London.
Benefits include:
25 days holiday
Enhanced Pension Scheme
Gym Membership paid for
Salary review twice a year
Income Protection
Life Assurance
What you will need to succeed:
Experience in AutoCAD producing structural engineering drawings.
At least five year experience at a UK design consultancy.
Proficient in in AutoCAD, Tekla and Revit.
Collaborate closely with engineers and other team members to ensure drawings meet design specifications and standards.
Assist in the preparation of construction documents, including plans, sections, and details.
Review drawings for accuracy and completeness, making revisions as necessary.
To apply
We are an Employment Agency specialising in the placement of contract and permanent staff in construction companies and design engineering consultancies across the UK. For further details please visit our website.
If this advertised position does not interest you, please consider our other opportunities by sending your updated CV outlining your achievements and your personal requisites, i.e. job roles, location, salary to us. We also operate a referral scheme, of which further details can be found on our website (search "Strata Construction Consulting").
Due to the sheer volume of applications we receive, we will only contact successful applications. Therefore, if you have not heard from us within 10 working days, please deem your application as unsuccessful.
Candidates must be eligible to work and live in the UK.
....Read more...
CNC Engineer / Programmer £30,000 to £35,000 p.a. + benefits – Calne, Wiltshire
CNC Engineer for successful company specialising in precision machined components
The Role
As CNC Engineer / Programmer you will operate CNC machinery using fanuc controls. You will be responsible for understanding the product dimensions and reading the blueprint. You will also be responsible for carrying out processes and procedures under the ISO 9001:2015 quality management system. Responsibilities include:
Programming and setting CNC lathes using Fanuc controls
Determining the dimensions of the components
Reading and interpreting customer drawings
Setting the machines according to the design
Working in collaboration with management
Implementing basic checks on all the CNC machineries
Performing quality assurance tests on all the products
Ensuring the production is according to the specifications
Writing and verifying all the technical documents of CNC programs
The Company
Our Wiltshire based client specialises in precision machined components and has been doing for over 50 years. They are proud to offer the best possible customer satisfaction through many years of experience and combined knowledge of a variety of engineering practices.
The Person
As CNC Engineer / Programmer, you will have proven work experience as a CNC Programmer and setter. A professional Computer Numerical Control certification will be an advantage. You will also have:
Ability to read or interpret blueprints
Ability to manage time with good multitasking skills.
Excellent knowledge of workplace safety
Ability to work in a team environment as well as independently
Outstanding mathematical and analytical skills
Experience and training in Geometric Dimensioning and tolerance
The role is 36 hours per week, Monday – Thursday working (No Fridays)
There is real potential for career progression within the company. Areas include progression into quality management, inspection, and shop floor management.
If you wish to be considered for the role of CNC Engineer / Programmer, please forward your CV stating current remuneration details and availability quoting reference 240540A.
WE REGRET WE CAN ONLY ACCEPT APPLICATIONS FROM PERSONS AUTHORISED TO WORK WITHIN THE UK
Applications are invited with experience in: engineering CNC technician programmer technology manufacturing precision engineering Fanuc....Read more...
CNC Engineer / Programmer £30,000 to £35,000 p.a. + benefits – Calne, Wiltshire
CNC Engineer for successful company specialising in precision machined components
The Role
As CNC Engineer / Programmer you will operate CNC machinery using fanuc controls. You will be responsible for understanding the product dimensions and reading the blueprint. You will also be responsible for carrying out processes and procedures under the ISO 9001:2015 quality management system. Responsibilities include:
Programming and setting CNC lathes using Fanuc controls
Determining the dimensions of the components
Reading and interpreting customer drawings
Setting the machines according to the design
Working in collaboration with management
Implementing basic checks on all the CNC machineries
Performing quality assurance tests on all the products
Ensuring the production is according to the specifications
Writing and verifying all the technical documents of CNC programs
The Company
Our Wiltshire based client specialises in precision machined components and has been doing for over 50 years. They are proud to offer the best possible customer satisfaction through many years of experience and combined knowledge of a variety of engineering practices.
The Person
As CNC Engineer / Programmer, you will have proven work experience as a CNC Programmer and setter. A professional Computer Numerical Control certification will be an advantage. You will also have:
Ability to read or interpret blueprints
Ability to manage time with good multitasking skills.
Excellent knowledge of workplace safety
Ability to work in a team environment as well as independently
Outstanding mathematical and analytical skills
Experience and training in Geometric Dimensioning and tolerance
The role is 36 hours per week, Monday – Thursday working (No Fridays)
There is real potential for career progression within the company. Areas include progression into quality management, inspection, and shop floor management.
If you wish to be considered for the role of CNC Engineer / Programmer, please forward your CV stating current remuneration details and availability quoting reference 240540A.
WE REGRET WE CAN ONLY ACCEPT APPLICATIONS FROM PERSONS AUTHORISED TO WORK WITHIN THE UK
Applications are invited with experience in: engineering CNC technician programmer technology manufacturing precision engineering Fanuc....Read more...
Time served / Apprentice trained Maintenance Electrician / Electrical Craftsperson is required for permanent position for a Manufacturing company in the Bury / Whitefield M45 area. Rate of pay is approx.. £48k pa incl. shift allowance (likely earnings to be circa £50k - £60k pa including regular O/T) plus benefits (see below). The successful candidate will be working a 4 week rotating, continental shift pattern, average of 42 hours/week (12 hour days & 12 hour nights, with 7 consecutive days off in a 4 week rotation).
The ideal candidate will have prior experience of working in an industrial manufacturing environment and be familiar with three phase / 440v, single phase and DC control systems (incl. motor and heating), industrial electrical installations and industrial manufacturing machinery.
Package:
£48k pa incl. shift allowance (weekly paid).
Regular overtime readily available, likely earnings to be £55-65k pa
33 days holiday allowance (6 hrs / half days can be taken)
Pension
Life assurance
Working Hours:
Continental shift pattern across 4 weeks - 12 hours shifts (Days 6am – 6pm & Nights 6pm - 6am)
4 week shift rotation example:
Week1: 1D, 3N, 3 OFF
Week2: 1 OFF, 3D, 3 OFF
Week3: 4 off, 3N
Week4: 4 off, 3D
Week5: 1D, 3N, 3 OFF
And so on.
The successful Maintenance Electrician / Electrical Maintenance Technician / Industrial Electrical Craftsperson day to day duties will include:
Diagnose and repair electrical problems on industrial and occasional domestic electrical systems – Including 3 phase motor control, DC motor control and Siemens control systems
Assess the parts needed for a job
Conduct routine preventative maintenance and testing
Rewire faulty electrical systems
Ensure good quality workmanship which upholds company standards and complies with industrial codes and follows safety requirements
Ability to work alone and also work within a team
Install electrical systems to 17th / 18th edition regs.
The ideal Maintenance Electrician / Industrial Electrical Craftsperson will have the following experience, skills and characteristics:
Completed relevant maintenance engineering apprenticeship i.e. NVQ L3 / C&G L3
Recent experience as an Electrical Maintenance Engineer in a manufacturing environment.
Relevant electrical engineering qualification and knowledge of current electrical wiring regulations 17/18th
Good working knowledge Three phase, single phase and DC control systems – including motor and heating
Able to follow relay ladder logic wiring diagrams
Industrial Electrical installation experience.
Basic understanding of mechanical, pneumatics, hydraulics repairs
Able to work under pressure, work safely, excellent problem solving skills, attentive and a logical thought process.
Ability to read electrical drawings
Good communicational skills (Oral, Reading & Writing), able to communicate at all levels.
HNC or higher Electrical Engineering qualification (desirable)
Testing and Inspection with PAT – (desirable)
Basic knowledge of a PLC’s / Siemens control system – recognition of Inputs and Outputs (desirable)
Basic knowledge of variable speed drives AC/DC (desirable)
This position could be right for you if you want to work as any of the following: Industrial Electrician, Electrical Craftsperson, Electrical Maintenance Engineer, Maintenance Electrician, Multi-Skilled Maintenance Engineer / Technician, Shift Engineer, Electrical Field Service Engineer, Maintenance Technician, Multi-Skilled Engineering Technician.
Key Words: Maintenance Electrician, Electrical Craftsperson, Electrical Maintenance Engineer, Industrial Electrician, Multi-Skilled Maintenance Engineer, Timeserved, Apprenticeship, 3 phase, single phase, PLC’s, Siemens, Control Systems, Motors, Drives, 17th / 18th Edition, Fault Finding, Industrial Engineering, Heavy Engineering, Lean, Manufacturing, Production, Pneumatics, Hydraulics, Mechanical, Permanent, Conti Shifts, Nights, Bury, Bolton, Rochdale, Oldham, Stockport, Manchester, Lancashire,
The successful Electrical Maintenance Engineer / Maintenance Electrician will need to be flexible as there will be a requirement work additional hours as and when the business requires and other duties not mentioned in this job description. You will also have the relevant qualifications and experience, be self-motivated / pro-active, able to work under pressure, well organised, analytical, logical, able to communicate at all levels, work alone and also as part of a team.
If you are interested in Maintenance Electrician / Industrial Electrical Craftsperson role and meet majority of the above criteria please click on the apply now button....Read more...
@mecscomms is recruiting a contract Network Engineer, home based, remote working, on behalf of a Global IT, Technology & Telecom service provider. The roles will have ownership for the management & delivery of bespoke & complex IP networks, IPVPN, IDA WAN & firewall security network solutions for global Enterprise customers. The IP Network Engineer will configure, commission, provision, implement & support service & network activation for Core, Internet, IP, Cloud & Data products.
If you possess a Cisco CCNA / CCNP / CCIP / CCDP & have experience in IP networking, IPVPN, MPLS, Security, Firewalls, network operations, provisioning, implementation, configuration, migration, troubleshooting or support, I'm keen to hear from you.
# Position: CCNA Network Engineer, Cisco Implementation Engineer, Deployment Engineer
# Location: Home based, remote working, work from home
# Duration: 12+ month contract
# Hours: Monday – Friday 09.00 -17.30
# Gross Rate: £20 - inside IR35
# Security Clearance: SC or BPSS level clearance (or eligibility for clearance) is essential
Environment:
Network Implementation Engineer, Deployment Engineer, Service Delivery, IP Network Engineer, Technician, Analyst, Network Administrator, Change Management, Delivery, Implementation, Deployment, Rollout, Service Delivery, Implementation, Configuration, Provisioning, Deployment, Support, Migration, Operations, Enterprise solutions, IT, Technology, Cloud Computing, Hosted Services, Internet, IoT, Hosting, Managed IT Solutions, Networks, Telecoms, Unified Comms, Security, Cisco, IPVPN, VPN, MPLS, WAN, LAN, BGP, RIP, EIGRP, OSPF ,ISIS, Junior, Cisco, IP, TCP/IP, OSPF, BGP, MPLS, ADSL, DSL, FTTP, FTTH, Fibre, xDSL, Ethernet, NOC, WAN, LAN, IPVPN, VPN, Data, RIP, RIPv2, EIGRP, Routers, Switches, NOC, TMC, NMC, Voice, CCNA, CCNP, CCIP, Cisco, Alcatel-Lucent, ADVA, Juniper.
Key Activity:
# Provisioning of Core IP, Data & Network Security solutions
# Solution implementation & configuration
# IP Network implementation
# Remote configuration & commissioning
# End to end deployment
# Change & delivery management
# New product deployment
# Process management
# Governance & Control
Overview:
The IP Network Engineer will be responsible for the configuration, commissioning, delivery, implementation & documentation of new customer deployments across complex IP WAN network solutions for Core, Internet, IP, Cloud & Data products including IPVPN, MPLS, Security, Firewall & IDA WAN network solutions.
Responsibilities:
# Provisioning of Core IP, Data & Security solutions for Enterprise customers
# Configuration of solutions over IP Internet, Cloud & Managed Cisco Service Provider core networks
# Translating customer solution design into robust technical solutions & their deployment
# Operational activities including Network configuration & integration of customer equipment
# Manage Provide, Change & Cease activity
# Customer circuit deliveries & planned outages / changes
# Carry out pre & post configuration testing to ensure error free installation (Layers 1, 2 & 3)
# Assist with the implementation of new Internet & Cloud based products, systems & processes
# Provide an escalation point for engineers requiring technical support
# Provide technical representation at customer & project related meetings
# Ensure quality assurance is maintained
# Maintaining associated customer & network documentation
Candidate Profile:
Candidates will be considered from a range of backgrounds from IP support to implementation and configuration, through to junior network engineers or telecommunications graduates and candidates with CCNA certifications.
Ideally you will have some previous network implementation engineering experience ideally gained within an ISP, Network Service Provider, Managed Hosting, Telecom, Technology, ICT, Cloud, Systems / Network Integrator or similar type of technology managed services provider.
Your professional or academic experience is likely to include some of the following:
# Network delivery for fixed-line WAN telecommunications services & product
# IP, Data & Transmission principles & protocols for Network Build
# Strong understanding of fixed line WAN products; Cisco, IP WAN, VPN, MPLS, Connectivity, IDA
# MPLS & VPN knowledge
# Experience with Routing Protocols (BGP, RIP, EIGRP, OSPF, ISIS)
# Layer 2/ 3 principles & protocols to across multiple MPLS networks
# Direct Internet, IP Transit, Internet Routing, RIPE database, Cisco Routers & Switches, PPP, MLPPP, Ethernet, configuring Cisco, Alcatel & Juniper devices
# TCP/IP protocols & services (TCP / UDP, IPSec, VoIP, SNMP, DNS, Radius / TACACS+, BGP, EIGRP, OSPF, ISIS), Transmission fundamentals
# IP network provisioning & implementation
# Cisco CCNA or CCNP or CCIP or CCDP accreditation
It is essential for candidates to currently hold OR be eligible to pass BPSS (Basic Check) and SC level security clearance checks.
@mecscomms: uniting opportunity with ambition in Telecoms | Media | Technology
@mecscomms is the brand name of MECS Communications Ltd who provide permanent & contract recruitment consultancy service as an Employment Agency & Employment Business.
For more information or a list of current vacancies, please see our web site at mecscomms.co.uk
....Read more...
