JOB DESCRIPTION
The QA Technical Service Rep is responsible for the timely delivery of services as they relate to the quality assurance of Tremco's installed roofing systems within their respective region.
$20-33/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Duties/Responsibilities, Core knowledge:
Lead Technician performing roof patch and repair as necessary and determined by the Quality Assurance Group on Tremco Incorporated roof systems (BUR, Modified Bitumen, Single Ply, Fluid Applied, etc.). Estimate material and labor quantities for roof patch and repair. Work with local WTI Field Representatives and/or Supervisors as required or necessary. Provide accurate and timely documentation to ensure that all work was completed properly and that the customer is fully satisfied. Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all work-related matters. Demonstrate working knowledge of all services provided. Perform any other duty and/or project as required or assigned by the QA Assurance Group.
Skills, Qualifications, Experience, Special Physical Requirements:
High school diploma or GED Prior roofing experience including patch and repair skills Knowledge and ability to use basic tools associated with commercial roofing Knowledge and experience monitoring and maintaining Quality Control Functional computer skills Safety training and OSHA knowledge with a commitment to safety at all times Understanding and ability to manage expenses Planning and organizational skills. Able to juggle multiple priorities and demonstrate good task management Work independently, as well as in a team environment, to solve problems and delegate assignments Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft) and carry basic hand tools, equipment and/or material up to approx. 100 lbs. over long distances Capable of walking along roof top edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc.) Ability to travel out of town including overnight travel Must have transportation and a valid driver's license Ability to work weekends and/or holidays if needed Ability to pass pre-employment drug test Ability to read, write and speak English The hourly rate for applicants in this position generally ranges between $20 and $33. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
Quality Assurance Technician
Based: Stoke-on-Trent
We are an international leader in the manufacture and distribution of small domestic products and appliances. Due to ambitious expansion and development plans, we are actively looking to appoint a Quality Assurance Technician to join our in-house QA Team.
Based at their site in Stoke-on-Trent, as a member of the Quality Assurance Team, you will be testing products, assessing function, performance and build quality within a Laboratory environment to ensure that the products are fit for market and meet the required standard for the brand.
This will involve; samples for assessment to include first samples, pre-shipment samples and stock samples tested and assessed following departmental procedures.
You will also be assessing returned products and establishing the reason for failure and will become familiar with UK & EU standards and legislation.
As a result, you will contribute towards the development of successful products by aiding the designers and engineers in the development stage through test reports, design input and root cause analysis of issues identified.
Ideally applicants will have previous experience of working in a test facility (either in-house or an external test house) or have hands-on experience of completing the QA testing procedure.
Ideally, candidates should have:
Hands on mechanical and/or electrical skills
Excellent attention to detail.
Good verbal and written communication skills.
Organised and structured with a drive for a clean, orderly, tidy and safe working environment.
Computer literate with good abilities with MS Excel & Word.
Enthusiastic with a ‘can do’ outlook.
An ability to get things done. Completes and finishes work with no loose ends.
The ability to work to tight deadlines under pressure and ability to handle multiple projects and priorities.
Able to work as part of a team or own initiative as required, and work with minimal supervision
Preferred but not essential:
Good understanding of Quality systems (e.g. ISO 9001)
Good understanding of relevant UK, European and International regulations standards, codes of practice and procedures (e.g. UKCA, CE, CCC, LVD, IP ratings, etc.)
Good experience of working in a technical test facility.
Minimum 1 years’ industry related experience in testing of products with mechanical, electrical, electronic & software elements.
Good experience of following detailed test requirements and protocols.
Good organisational skills with the ability to prioritise tasks and make confident decisions.
In return, we are able to offer an attractive salary and benefits package.
This role can be surmised as one that is very process-driven and product-focused. You must have good investigative skills with strong attention to detail; good organisational and time management skills, be motivated and able to work unsupervised; and have excellent communication skills.
When applying for this role, please indicate your current salary (plus benefits package), minimum salary required, notice period and your reasons for wishing to move from your current company. Alliance Consulting is acting as an employment agency in this respect. Alliance Consulting specialise in the placement of engineers throughout the UK. By sending us your CV you are explicitly consenting to our processing of your personal data on a computer database and/or in manual files for the purpose of evaluating your application for employment. This processing will be carried out in accordance with the UK Data Protection Act 1998. By applying for this role you hereby consent to us submitting your CV to our client. If you do not wish your CV to be sent to our client then you must clearly state this to us. Equally, if there are any companies that you do not wish your CV to be sent to (for whatever reason), then please let us know of this when you apply.....Read more...
**Job Title: Product Manager - Healthcare/NHS** **Location:** Remote (with travel to Head Office as required) **Salary:** £65,000 - £75,000 per annum Are you an experienced Product Manager with a background in the Healthcare/NHS sector? Do you have a proven track record of successfully managing product development initiatives in agile environments? If so, we have an exciting opportunity for you to join our client's team as a Product Owner focusing on their main patient and clinical portals. **About Us:**A leading healthcare organization dedicated to providing innovative solutions to improve patient care. As they expand their digital offerings, they are seeking a talented Product Owner to play a pivotal role in the development and enhancement of their patient portal. **Responsibilities:**- Lead the product vision, strategy, and roadmap for our main patient portal and clinical portal, ensuring alignment with organizational goals and objectives.- Collaborate with stakeholders to gather requirements, prioritize features, and define acceptance criteria.- Work closely with agile development teams to deliver high-quality solutions on time and within budget.- Manage relationships with third-party vendors, including delivery and quality assurance partners.- Engage senior leaders to communicate the product vision and gather feedback to drive continuous improvement.- Prioritize and manage the product backlog, ensuring alignment with business priorities and customer needs. **Requirements:**- 5+ years of experience as a Product Manager, with a background in healthcare or the NHS.- Strong understanding of agile delivery principles and methodologies, with experience implementing agile practices in healthcare settings.- Proven ability to work with and manage third-party vendors, including delivery and quality assurance partners.- Excellent communication and interpersonal skills, with the ability to engage senior leaders and articulate the product vision effectively.- Demonstrated gravitas and leadership skills, with the ability to manage product development initiatives and prioritize competing demands effectively. **What We Offer:**- Competitive salary between of £65,000 - £75,000 per annum.- Permanent role with the opportunity to make a significant impact on patient care.- Remote working opportunities with travel to Head Office as required.- The chance to work on cutting-edge digital solutions in a collaborative and innovative environment.- Professional development and growth opportunities within a dynamic and forward-thinking organization. If you are a proactive and experienced Product Manager, who is still hands-on, with a passion for healthcare innovation, we invite you to apply for this exciting opportunity. *To apply, please submit your resume and a cover letter outlining your relevant experience and why you're the ideal candidate for this role.*....Read more...
An amazing new job opportunity has arisen for a committed Acute Consultant Psychiatrist to work in an amazing hospital based in the Charlwood, Surrey area. You will be working for one of UK's leading health care providers
This is a low and medium secure hospital specialising in treating male patients aged 18+ who have been detained under the Mental Health Act (1983) and who will benefit from extended treatment and rehabilitation
**To be considered for this position you must hold a Full GMC Registration**
As an Acute Consultant Psychiatrist your key responsibilities include:
Ensure that people admitted are assessed, treated, and discharged safely
Medication management
Quality assurance, complaints and co-production
Delivery of NICE guidance
Lead and manage the CPA and ICR process to ensure full compliance with quality standards
The following skills and experience would be preferred and beneficial for the role:
Experience working in psychiatry within multi-disciplinary teams
To be in good standing with the Royal College of Psychiatrists
Be accredited or about to be accredited in Forensic psychiatry with the GMC
To have had an appraisal/RITA within the last year
The successful Consultant Psychiatrist will receive an excellent salary up to £160,000 per annum. This exciting position is a permanent full time role for 37.5 hours a week. In return for your hard work and commitment you will receive the following generous benefits:
25 days annual leave (pro-rata) plus bank holidays and your birthday off!
A Group Personal Pension Plan (GPPP) and pension contribution
Life Assurance
Enhanced Maternity Package
Free meals while on duty
Employee Assistance Services
Career development and training
Wellbeing support and activities
Voluntary benefits
Medical indemnity cover
Flexibility to work in clinically led environments
Reference ID: 5980
To apply for this fantastic job role, please call on 0121 638 0567 or send your CV ....Read more...
QC / Quality Controller – Malmesbury Mon – Friday – Days£24960 based on a 40 hour week This is an excellent opportunity to join an established and successful award-winning supplier of FMCG products in a QC / Quality Controller Essential to the role is experience of working within a Food /FMCG production environment and/or factory auditing This QA / Quality Auditor /Quality Controller role will involve: Auditing, monitoring and evaluating quality systems and procedures as well as providing additional technical support to the factory.You will be maintaining and promoting technical and quality standards.Carrying out on line QA checking/auditing to ensure correct standards are applied and adhered to. These include packing standards, code checks, labelling information, weight checks, gas checks, metal detection confirmation and pricing checks.Hygiene Auditing and Environmental swabbingCCP, labelling and traceability checks The Hours are Monday - Friday 8 – 5PM and additional benefits include no weekends / bank holiday workingReduced prices in factory shopFree tea / coffeeGood quality staff facilitiesCompany pensionFree membership with Medicash (contributions to dental and optical bills, access to physio, medical support)Nice part of the world to work / live (Cotswolds)! Key words: QA, QC, Quality Control, Quality Assurance, BRC, Auditor, Quality Compliance, Quality Auditor, Technical assistant This role is commutable Bristol, Chippenham, Tetbury, Cirencester, Castle Coombe, Bath and surrounding areas ....Read more...
Medical Diagnostics Design Engineer – Electromechanical Design – South Cambridge
A new Medical Devices start-up company, based just south of Cambridge, is seeking a Medical Diagnostics Design Engineer to assume responsibility for the Electromechanical Design of a new Medical Diagnostics technology.
You will be part of a team that includes physicists, scientists, electronics engineers, and other Medical Devices experts. Your role will encompass all aspects of the mechanical and electrical development of this innovative medical diagnostics technology.
You should have prior experience in the electromechanical design of medical devices or life sciences technologies.
It is expected that you hold a degree in a relevant subject, coupled with several years of industry experience.
The company has the unique ability to offer an excellent benefits package, which is unusual for a start-up. This package includes a pension, shares, medical insurance, life assurance, and other outstanding benefits, in addition to a competitive starting salary.
We are looking for someone to start as soon as possible, and interviews will be conducted swiftly. Therefore, if you are interested in the role, we recommend submitting your application now to avoid missing out.
For more information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on 0121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Are you seeking an exciting Production Engineer job within an innovative and advanced technology company that’s based in Chelmsford, Essex? Do you have a keen interest in mechanical / production / test engineering?
As a Production Engineer you will play a pivotal role in the manufacturing process, ensuring the successful production of high-quality RF products. Your expertise will drive efficiency, optimise processes, and guarantee products meet stringent quality standards. You will collaborate closely with cross-functional teams, including design, manufacturing, and quality assurance, to deliver exceptional RF products to our customers in Medical, Marine, Industrial and Defence markets.
Key skills and experience for the Production Engineer role based in Chelmsford, Essex:
Bachelor’s Degree in Mechanical, Manufacturing, Electrical Engineering or similar. Alternatively, HNC and 3-5years experience.
Engineering experience in a manufacturing environment.
Proficiency in process optimisation, root cause analysis, and quality control methodologies, such as 8D, Six Sigma.
Excellent problem-solving skills and the ability to work well under pressure.
We are looking for an ambitious individual who is excited by technology and innovation who would like to join a team of fast-moving, dedicated, passionate and technical professionals focused on making a difference.
This Production Engineer is based in Chelmsford, Essex is a fantastic opportunity to join a company who offer dynamic, challenging and exciting career opportunities and is commutable from Bishop’s Stortford, Braintree, Colchester, Southend-on-Sea, Brentwood, Ilford, Romford, Ipswich, Harlow, Enfield and Basildon.
For more information on this Production Engineer job in Chelmsford, Essex or to discuss similar jobs, please call Leah Rogers at Redline Group on 01582 878834 or 07961 158783 alternatively, email LRogers@Redlinegroup.Com....Read more...
12 Month FTC role available Immediately, flexible working hours, 33 Holidays, 13% pension scheme, on-site gym, free parking with the opportunity to work with a fun and quality conscious team, are some of the perks the Quality Administrator will enjoy whilst working with this world class manufacturing business The role is Based in HUDDERSFIELD, just 10 minutes from the M62, this business is easily commutable from Halifax, Bradford, Leeds, Rochdale, Oldham, Manchester, Wakefield, Barnsley, Rotherham and Sheffield. Key Responsibilities of the Quality Administrator:
To provide support in the implementation of Quality management Systems
Maintaining the QMS System ensuing full compliance and standards in data and documentation
Assist with the implementation of the NCR Process providing reports and data
Support with Audits
Maintaining quality documentation and material
Work with suppliers and internal stakeholders
For the Quality Administrator role, we are keen to receive applications from individuals who possess:
Experience of working with Quality Management Systems
Quality Assurance and Quality control experience preferred
Excellent Administration skills
Good interpersonal skills.
Excellent Excel Skills
Attention to detail
Hardworking
The ability to work as a team but also on own initiative
Desirable
SAP Experience
Experience working in Engineering/Manufacturing Environment
Strong working knowledge of IS09001 – ideally with Auditing experience
Working hours of the Quality Administrator:
Working 37.5 hours per week, the successful candidate will be offered a with flexible working hours to suit their circumstances; however, the below core working hours must be worked by all employees.
Monday to Thursday – 9:30AM to 2:15PM
Friday – 9:30AM to 12PM
In return, the Quality Administrator will receive:
Salary: Up to £28,000.00 per annum DOE
Holiday Entitlement: 33 Days including public holidays
Pension Scheme: Up to 13% combined contribution with immediate enrolment (8% Employer / 5% Employee)
Access to onsite facilities including free car parking and company gym
....Read more...
Quality Manager - Manufacturing BusinessA global manufacturer, specialising in the design, production, and distribution of vehicles and equipment, is seeking a proficient Quality Manager.
The Quality Manager will take is needed that can lead internal, customer and ISO Registration audits for a leading manufacturing business in Birstall.This position will serve as the primary contact for site departments, business units, and corporate functions and will work closely with direct reports to provide guidance and development opportunities.
This position will serve as the primary contact for site departments, business units, and corporate functions and will work closely with direct reports to provide guidance and development opportunities.Position Overview: As the Quality Manager, you will spearhead internal, customer, and ISO Registration audits for our leading manufacturing business based in Birstall. Serving as the key liaison among site departments, business units, and corporate functions, you'll play a pivotal role in steering compliance programs and fostering developmental opportunities for the team.Responsibilities:Act as the champion and subject matter expert for Quality Systems and Compliance programs. Ensure the development, effective maintenance, and continuous compliance of the site's quality system with business unit requirements and standards (i.e., ISO 9001, 45001, 14001– aiming to achieve these).Lead departmental activities within the Quality Systems function, overseeing various operations such as Document Control, Corrective and Preventive Action, Supplier Audits, and more. Continuously enhance regulatory knowledge to bolster surveillance activities. Spearhead Quality System improvement initiatives and Business Continuity Planning programs. Author and approve validations aligned with customer and regulatory demands. Establish reporting mechanisms and support local-level teams and global business units. Collaborate with stakeholders to fortify the effectiveness of Systems and Compliance programs. Contribute to the formulation and implementation of capacity planning strategies and best practices to enhance operational performance. Assess risks associated with departmental processes and tasks.Benefits:Competitive salary circa £45K. Company Bonus. Permanent Position. Life Assurance. Private Medical Care. Consistent work hours (8:30 am - 4:30 pm, 3:30 pm finish on Fridays). Join a dynamic team dedicated to delivering excellence in quality, safety, and compliance within the manufacturing industry. Apply now and become an integral part of our mission to uphold the highest standards in fire-fighting and rescue equipment worldwide.....Read more...
Quality Health Safety Environment (QHSE) Manager - Manufacturing Business A global manufacturer, specialising in the design, production, and distribution of vehicles and equipment, is seeking a proficient Quality Health Safety Environment (QHSE) Manager.The Quality Manager will take is needed that can lead internal, customer and ISO Registration audits for a leading manufacturing business in Birstall. This position will serve as the primary contact for site departments, business units, and corporate functions and will work closely with direct reports to provide guidance and development opportunities.Position Overview: As the QHSE Manager, you will spearhead internal, customer, and ISO Registration audits for our leading manufacturing business based in Birstall. Serving as the key liaison among site departments, business units, and corporate functions, you'll play a pivotal role in steering compliance programs and fostering developmental opportunities for the team.Responsibilities:Act as the champion and subject matter expert for Quality Systems and Compliance programs. Ensure the development, effective maintenance, and continuous compliance of the site's quality system with business unit requirements and standards (i.e., ISO 9001, 45001, 14001– aiming to achieve these).Lead departmental activities within the Quality Systems function, overseeing various operations such as Document Control, Corrective and Preventive Action, Supplier Audits, and more. Continuously enhance regulatory knowledge to bolster surveillance activities. Spearhead Quality System improvement initiatives and Business Continuity Planning programs. Author and approve validations aligned with customer and regulatory demands. Establish reporting mechanisms and support local-level teams and global business units. Collaborate with stakeholders to fortify the effectiveness of Systems and Compliance programs. Contribute to the formulation and implementation of capacity planning strategies and best practices to enhance operational performance. Assess risks associated with departmental processes and tasks.Benefits:Competitive salary circa £45K. Company Bonus. Permanent Position. Life Assurance. Private Medical Care. Consistent work hours (8:30 am - 4:30 pm, 3:30 pm finish on Fridays). Join a dynamic team dedicated to delivering excellence in quality, safety, and compliance within the manufacturing industry. Apply now and become an integral part of our mission to uphold the highest standards in fire-fighting and rescue equipment worldwide.....Read more...
Position of Clinical Pharmacist – Rotational
Salary Potential £48,000 per annum
Location West London
Shifts Mainly working 3 long days per week (12-hour shifts)
Fully Funded Training Opportunities to complete you PG in Clinical Pharmacy and Independent Prescribers (IP) course.
MediTalent are delighted to be recruiting for a clinical pharmacist for the private hospitals rotational team. Working closely with the management team involving supporting in the strategic planning and development of the pharmacy department.
This opportunity is perfect for somebody who has some post-registration clinical experience and looking to secure their a Clinical Pharmacist role. Rotations can include acute medicine, intensive care, MSK, surgical, orthopaedics.
Must have current professional registration as a Pharmacist with the General Pharmaceutical Council (GPhC)
Interested to study and complete your PG in Clinical Pharmacy
Opportunities to become an Independent Prescriber (IP)
Responsibilities
Work in alignment with Senior Clinical Pharmacist in developing and implementing strategies to monitor the overall quality of medicines management.
Be a key team player in supporting the development, validation and maintenance of clinical pharmacy services within an acute setting.
Regular attendance at the critical care related multidisciplinary team meetings.
Support the Medicines Safety Officer and the Pharmacy Quality Assurance Lead in the safe and effective use of medicines within Critical Care.
Salary and Benefits
Salary up to £48,000 per annum
Competitive holiday scheme which increases longevity
Private Medical Insurance & Life Assurance
Enhanced Company Pension
Fully funded CPD – Management courses, Post Graduate Certifications and much more! A company which invests in you
Interest-free season ticket loans
Cycle to work loan scheme
Employee "Service Excellence" recognition rewards
Childcare vouchers
Plus, much more – Ask to find out full details!
Due to the high interest, we advise an early application or please get in touch with Tom Fitch on 07747 037168 for further information.
Unfortunately, due to the requirements of our client it is essential to have UK based experience.
Referrals
We have a range of fantastic opportunities for Nurses, Consultants and Allied Health Professionals to work across a variety of healthcare settings globally. If you provide us with a successful recommendation, we will reward you with £££’s of high street vouchers.....Read more...
My client, a market-leader in products and services for aircraft interior are Looking for Composite Fitter/Trimmer's of all levels to join their team on a permanent basis. Utilising the best industry specialists, they manufacture, maintain, design, and certify cabin interiors for the biggest airlines around. This is an opportunity you dont want to miss! Full training provided!
Composite Trimmer/Fitter Responsibilities:
- Precision Fabrication: Hand trim and bond various carbon composite components to an exceptional degree of accuracy and quality, meeting rigorous customer standards.
- Technical Expertise: Read and interpret technical engineering drawings, including fits and tolerances, to precisely execute projects.
- Adhesive Applications: Bond ultra-lightweight composite structures used in aerospace applications.
- Quality Assurance: Follow work instructions, engineering manuals, and customer specifications to produce parts that meet all quality and traceability requirements. Identify and report non-conformities to the Production Engineer.
- Safety Focus: Prioritize safety by adhering to all Health and Safety guidelines and using/maintaining personal protective equipment (PPE) properly.
- Equipment Maintenance: Maintain company tools and equipment in a safe and clean working condition.
- Production Efficiency: Contribute to achieving departmental production and quality targets.
- Teamwork and Communication: Collaborate effectively with the team and possess good communication skills.
Composite Trimmer/Fitter Desired Skills & Traits:
- Quick Learner: Demonstrate a strong ability to learn quickly and apply new knowledge to perform tasks correctly.
- Adaptability: Thrive in both fast-paced and relaxed environments, maintaining focus under pressure.
- Time Management: Maintain good timekeeping habits.
- Technical Aptitude: Experience and skill operating computers and MS Office is a plus (advantageous).
- Growth Mindset: Be an honest and hardworking individual with a continuous learning attitude and a desire for professional development.
- Team Player: Demonstrate a willingness to integrate into a team environment and collaborate effectively.
- Ambition: Possess ambition for professional growth within the company.
Composite/Fitter Trimmer's please apply or if you do have any questions please email liam.nother@holtengineering.co.uk....Read more...
Job Type: Carpenter (Fire Safety Work) Pay Rate: £22.23 per hour Hours: 36+ hours per week Area: North LondonA dynamic and reputable organisation specialising in building maintenance and safety improvements is seeking a skilled Carpenter with a focus on Fire Safety Work. This role is crucial for enhancing the safety and integrity of both occupied and void housing properties, as well as other premises through expert carpentry.
Key Responsibilities:
Building Repairs and Maintenance: Execute building repairs, maintenance, and renewals ranging from emergency and routine reactive repairs to programmed refurbishment works.
Fire Safety Improvement Work: Specialise in upgrading doors, frames, and door sets to meet current fire safety standards and regulations.
Quality Assurance: Deliver consistently high-quality workmanship, ensuring customer satisfaction and adherence to the 'Right First Time' principle.
Independent Work: Operate independently and unsupervised, demonstrating a high level of skill and reliability in all tasks.
Essential Skills and Experience:
Proven experience in carpentry, specifically with tasks related to fire safety improvements, including the upgrading and fitting of doors, frames, and doorsets.
Knowledgeable in current building standards and fire safety regulations.
Ability to work independently, efficiently, and to a high standard of quality.
Excellent problem-solving skills and attention to detail.
Strong customer service orientation and communication skills.
Candidate Must have:
Awareness of fire safety in buildings
Minimum Level 2 NVQ City and Guilds in Carpentry and Joinery
Full Clean UK Driving Licence
....Read more...
An amazing new job opportunity has arisen for a committed Registered Service Manager to work in an exceptional residential service based in the Colchester, Essex area. You will be working for one of UK’s leading health care providers
This is a relaxed and welcoming home that gives the people living there a space of their own, and the independence to make their own choices, but with support always there when they need it
**To be considered for this position you must hold an NVQ/QCF Level 5 in Health & Social Care**
As a Registered Manager your key responsibilities include:
Enable the people we support to lead a fulfilling life and to maximise their independence to enable them to achieve their full potential
Ensure the wellbeing of the team is prioritised, and that they are given the appropriate tools and opportunities to excel in their current role and future career
Ensure the service is run in an efficient and responsible manner, balancing the achievement of budget with the ethos of excellent quality
Effectively manage financial performance, with financial resources appropriately managed & controlled
Promote quality assurance, working towards legal, clinical, statutory, and organisational obligations, to develop effective work strategies and processes, ensuring that the business is run in an efficient and responsible manner
Ensure full and accurate reporting of management information, maximising quality and compliance
The following skills and experience would be preferred and beneficial for the role:
Experience working with those with Learning Disabilities or complex behaviours
A background in Supported Living or Residential Services
Bring strong leadership, interpersonal and communication skills
Be confident, flexible and efficient – you’re happy to work on a shift basis and, where required, be on call
Above all, you’ll be committed to providing person-centred care that provides equitable opportunities to all of those you’re working for
The successful Registered Manager will receive an excellent salary up to £36,000 per annum. This exciting position is a permanent full time role working through days. In return for your hard work and commitment you will receive the following generous benefits:
Discretionary 10% annual bonus scheme
Free DBS
Holiday Purchase Scheme – Purchase an additional two days annual leave each year
Life assurance benefit of twice annual basic salary
Wagestream – Avoid bank fees and withdraw up to 40% of your wages as you earn them before payday via the Wagestream app
Comprehensive induction and excellent training
Recognition Awards, including long service awards
Cycle to work Scheme
Employee benefits platform providing discounts at over 150 retailers
Employee Assistance Programme, confidential telephone counselling and legal advice
Health and Wellbeing portal
Reference ID: 6611
To apply for this fantastic job role, please call on 0121 638 0567 or send your CV ....Read more...
Holt Executive is supporting a global leader that designs and manufactures high-performance imaging sensors, and electronics and develops groundbreaking technology for space exploration.
Our client is seeking a Quality & Compliance Engineer to join their RF Power Division and provide guidance and support to the engineering and manufacturing teams in achieving statutory regulatory compliance and product quality for market-ready products.
The successful Quality & Compliance Engineer will possess a deep understanding of relevant regulations and standards, as well as how to achieve compliance from an electrical and mechanical design perspective.
Key Responsibilities for the Quality & Compliance Engineer:
Compliance Focus -
- Provide guidance and support to ensure all regulatory compliance requirements are understood and implemented for products.
Product Quality Focus -
- Ensure RF Power products, processes, and systems function flawlessly and consistently at the desired quality level.
- Tasks include tracking, monitoring, and reporting of non-conforming products and processes.
- Drive all Corrective Actions, Deviations, and Quality Notifications to completion for the assigned product range.
Overall Responsibilities -
- Ensure customer expectations are met or exceeded through effective monitoring and control.
- Lead root cause investigations in the event of product escapes.
- Plan, test, and implement corrective and preventive actions.
- Utilise strong communication skills to influence peers and raise the bar for quality methods and regulatory compliance.
- Employ a pragmatic and data-driven approach to prioritise improvements across the product portfolio.
Key Skills & Experience Required by the Quality & Compliance Engineer:
- Proven experience applying regulations to products for global markets.
- Establishes compliance test standards, conducts and witnesses tests, analyses findings, and ensures compliance throughout the product lifecycle.
- Effectively explains compliance protocols and measures to stakeholders and regulatory bodies.
- Experience with electrical/electronic systems is preferred, with a desire to transition into product compliance.
- Demonstrated knowledge of CE/UKCA requirements (safety, EMC, machinery directive) and hazardous substances (REACH & RoHS).
- Experience compiling, collating, and publishing technical documentation for certification submissions. Experience working with regulatory agencies and third-party bodies.
- Maintains product compliance declarations and ensures compliance considerations are integrated into new product designs (electrical, mechanical, EMC).
- Provides support and guidance for safety assessments (e.g., BSEN61010) and mentors project engineers on compiling documentation for compliance verification.
- Demonstrates experience in an engineering function supporting product development and manufacturing.
- Working knowledge of electrical/mechanical assembly, manufacturing, testing, and qualification.
- Familiar with good quality management principles (ISO 9001 minimum). Experience conducting internal audits and driving process improvement.
- Understands and meets customer contractual requirements and expectations.
- Analyses and improves existing quality assurance processes and deliver training to stakeholders.
Essential Qualification for the Quality & Compliance Engineer:
Bachelors degree/HNC in Quality & Compliance Engineering, Electrical Engineering, or an equivalent level of experience. While not a requirement, possession of a professional registration (IEng or CEng) would be a benefit.....Read more...
Quality Technician – Medical
Location: Welwyn Garden City (You will need to be able to relocate to Oxford in 2025)
Company: Join a dynamic team at a leading medical device company currently based in Welwyn Garden City. In February 2025 the company is moving into a brand-new flagship site based in Oxford.
This is an amazing opportunity to work for a company that change peoples lives for the better!
They are looking for someone who can come in and collaborate with cross-functional teams to ensure the quality assurance and compliance of products, materials, processes and documentation relating to medical device manufacture, goods in inspection, in process inspection and final product testing.
Key Responsibilities for this Quality Technician – Medical job are:
All aspects of manufacturing quality compliance (e.G. Goods in inspection, in process QC checks, final functional testing and analysing the results)
Reviewing batch records, ensuring error-free manufacturing and batch release
Creating/enhancing tooling descriptions, perform calibrations and ensuring calibration & maintenance log is updated and non-conforming tools removed from the manufacturing environment
Maintaining manufacturing KPIs, assessing the production process and creating quality checkpoints
Maintain quality system documentation including supplier records, purchase and manufacturing batch information
Support investigation, analysis and closure of relevant NCRs
Qualifications and Skills required for this Welwyn based Quality Technician - Medical job are:
A background in electronics and/or electro-mechanical assemblies is essential for this role, and experience with Quality management systems such as ISO13485, AS9100 or ISO9001
Electro-mechanical apprenticeship or similar higher education award in this or an associated area e.G., HNC, HND or Level 3 NVQ in a relevant area or higher desirable
Experience of electro-mechanical assemblies in medical device, aerospace, or defence sectors required
Experience in visual inspection and excellent eye for detail
Familiar with test/inspection equipment such as oscilloscopes, multimeters and digital callipers
Experience in Quality Control function such as inspection and measurement
Experience in highly regulated environment (healthcare, aerospace, defence)
How to Apply:
If you're ready to join our clients dynamic team and contribute to the advancement of medical technology, please submit your resume and cover letter to ndrain@redlinegroup.Com or call Nick on 01582878828 / 07961158760!....Read more...
Manual Inspector
An opportunity has opened up for a Manual Inspector to join a leading manufacturer of precision machined components for the Oil and Gas, Telecommunications, Aerospace and Defence, Land and Sea Systems, Nuclear and Marine industries and emerging markets. The successful Visual Inspector will have a proven background within inspection with excellent communication and to strive for maintaining high-quality standards of acceptance.
Essential skills needed for Visual Inspector
- Must have right to live and work in the UK *Essential*
- Previous experience within a similar role
- Knowledge and use of manual measuring equipment
- Understanding of drawing tolerances and specifications
Benefits for Visual Inspector
- Excellent pension and life assurance scheme
- Free on-site car parking
- Career and development opportunities
- 34 days holiday (incl. bank holidays)
- Health cash plan scheme
- Health & wellbeing services
- Employee discount scheme
- Employee Assistance Programme
- Cycle to Work Scheme
- Profit sharing scheme
- Reward and recognition
Hours for Visual Inspector
Monday to Thursday 6.45am to 3.30pm
Friday 7am to 1pm
If you are interested in this Manual Inspector opportunity, please contact James on 07485 390941 or email James.Ferrier@holtengineering.co.uk....Read more...
Clinical Lead - Nursing Home
Ready for your next opportunity? As Clinical Lead Nurse you will contribute to the leadership of the home by attending regular Leadership Meetings, Complex Care meetings and a monthly Clinical Governance meeting to collaborate on creative solutions to challenges faced throughout the home.
To act as an Assessor for carers completing the Care Certificate To nurture new staff as they develop sound skills
To undertake supervisions with Nurses
To work collaboratively with the Leadership Team and
To contribute towards the Quality Assurance Framework by completing delegated aspects and tasks.
This home is part of a small supportive group, with a family feel about it. Who look to promote internally. Must be nurse qualified to apply for this role.
Want to hear more? Call Kim on 0161 914 5722 or apply below.
M0424RP
M0524RP ....Read more...
Welder / Fabricator
Location: Stonehouse, Gloucestershire
Salary: Very Competitive + Excellent Benefits
Working Hours: 38 hours per week
The Client:
Our client is a global provider of rotary valves and valve technologies for powder processing and bulk handling sectors, offering top-notch, dependable components that surpass customer expectations.
The Role:
As a Welder / Fabricator, you willplay a pivotal role in in fabricating and welding light to medium gauge steel according to precise engineering drawings.
Responsibilities:
? Read, interpret, and follow engineering plans, drawings, and instructions meticulously.
? Conduct MIG welding primarily for mild steel components.
? Execute TIG welding, mainly for stainless steel materials.
? Utilise handheld tools and dedicated machinery for grinding and polishing fabricated items.
? Perform thorough quality checks to uphold product standards.
? Ensure adherence to production schedules.
? Work in compliance with quality standards and safety protocols.
? Maintain machinery and tools through preventative maintenance routines.
? Uphold a clean and safe working environment consistently.
Requirements:
? Previously worked as a Fabricator, Welder or in a similar role.
? Previous experience of TIG & MIG welding
? Background of working in a fabrication environment.
? Fabrication / Welding qualification or apprenticeship.
? Strong communication and organisational skills.
? Self-motivated and team oriented.
Shifts:
? Monday - Thursday: 07:30 - 16:00
? Friday: 07:30 - 13:30
Benefits:
? Competitive salary
? 33 days holiday
? Bonus scheme
? Pension scheme
? Life assurance
? Free car parking
? Employee support and perks package
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Add....Read more...
Senior Clinical Pharmacist – Exciting Opportunity to Join the Night Shift team!
Location: City of London
Shifts: 3 days per week! 20:00 to 08:00 (Working 12.5-hours shifts per week)
Salary Potential: Up to £65,000 per annum (inclusive of night shift enhancements)
Are you an experienced clinical pharmacist seeking a pivotal role in a prestigious private hospital's night shift team? MediTalent invites you to join the team for this exceptional opportunity, where you'll contribute to the strategic growth and excellence of our pharmacy department.
Working within a leading London hospital who have state-of-the-art facilities and access to outstanding training to enhance your career.
Join Professional Background:
Possess a master's degree in pharmacy or an equivalent qualification, demonstrating a solid educational foundation.
Ideally, you’ll hold a postgraduate clinical diploma in hospital clinical pharmacy or possess equivalent hands-on experience in the field.
Maintain full registration with the General Pharmaceutical Council (GPhC), ensuring compliance with regulatory standards.
Experience Highlights:
Showcase a proven and distinguished track record in hospital settings.
Demonstrate competence in general clinical practice, with expertise spanning both acute medicine, surgery and any specialist areas.
Primary Responsibilities:
Collaborate closely with the Senior Clinical Pharmacist to formulate and execute strategies aimed at monitoring and enhancing the quality of medicines management.
Assume a pivotal role in the development, validation, and ongoing maintenance of clinical pharmacy services within the dynamic environment of an acute care setting.
Regularly participate in pharmacy related multidisciplinary team meetings, contributing valuable insights, and fostering effective communication.
Provide essential support to the Medicines Safety Officer and Pharmacy Quality Assurance Lead, ensuring the safe and effective utilization of medications within the hospital.
Salary and Benefits:
Competitive salary, up to £65,000 per annum (inclusive of night shift enhancements).
Generous holiday scheme with increasing longevity.
Private Medical Insurance & Life Assurance.
Enhanced Company Pension.
Fully funded CPD opportunities, including management courses and Post Graduate Certifications.
Interest-free season ticket loans.
Cycle to work loan scheme.
Employee "Service Excellence" recognition rewards.
Childcare vouchers.
And much more – inquire to discover full details!
Application:
Due to high demand, early application is recommended. Please contact Tom Fitch at 07747 037168 for further information.
Please note: UK-based experience is essential due to client requirements.
Referral Program: Do you know talented Nurses, Consultants, or Allied Health Professionals seeking opportunities across healthcare settings worldwide? Recommend them to us, and we'll reward you with high street vouchers!....Read more...
Mechanical Engineer – Cancer Instrumentation – Cambridge
A growing division within an established Medical Devices organisation in South Cambridge is currently seeking an experienced Medical Devices Mechanical Engineer to contribute to their ongoing development of cutting-edge cancer instrumentation, aimed at improving patient recovery rates.
This company is expanding its team dedicated to Medical Devices Instrumentation, primarily focusing on Cancer Instrumentation. Ideally, they are looking for candidates with prior experience in Medical Devices Instrumentation. However, they are open to considering candidates who have worked on other types of Medical Devices, provided they were developed to ISO 13485 standards.
The company offers state-of-the-art labs and workshops to facilitate your success in developing these life-saving technologies. You will also receive ongoing training and development to ensure you stay at the forefront of technological advancements.
In addition to relevant experience, it is expected that you hold a relevant degree in mechanical engineering or a related field that has prepared you for a career within the Medical Devices sector.
As mentioned, you will be working on life-saving technologies, benefiting from continued career and skills development, and rewarded with an excellent starting salary, pension, life assurance, bonuses, healthcare, dental coverage, and other benefits typically associated with large multinational organisations.
Due to the anticipated high level of interest in this role, we recommend that if you are interested, you submit your application promptly and specify the types of Medical Devices you have experience working on.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Electronics Design Engineer – Medical Devices FPGA – Cambridge
An exciting and growing Medical Devices organization based in Cambridge is currently seeking an experienced Electronics Design Engineer to work on the development of life-saving and life-improving Medical Devices.
With a primary focus on FPGA design, you will collaborate with other electronics engineers, mechanical engineers, software engineers, physicists, and scientists in the development of these Medical Devices.
In addition to FPGA Design, you will also engage in hands-on prototype development, using soldering to construct the electronics you have designed.
You will be working with highly complex technologies, ensuring that your work remains challenging every day.
Ideally, you would have prior experience in electronics design for Medical Devices. However, we are open to candidates from other highly regulated sectors, as long as your expertise lies in FPGA electronics design.
It is expected that you hold a degree in electronics engineering. Nevertheless, if you have transitioned into an Electronics Design Engineering role through an alternative path, we would still like to hear from you, as industry experience holds significant importance.
Your dedication will be rewarded with an excellent starting salary, opportunities for career development, job security, bonuses, a pension plan, life assurance, and other outstanding benefits.
Given the anticipated high level of interest in this role, if you are seeking a new opportunity, we recommend submitting your application promptly to avoid missing out.
For more information, please do not hesitate to contact Andrew Welsh, Director of Medical Devices Recruitment, and Scientific Recruitment Specialist at Newton Colmore, at +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will get in touch with you.
Newton Colmore Consulting is a specialized recruitment company operating within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Product Design Mechanical Engineer – Medical Device – Warwick
A growing Medical Devices company, located in Warwick, is currently seeking an experienced Product Design Mechanical Engineer to contribute to the development of various Medical Devices.
As part of a team of engineering experts, including physicists, electronics engineers, scientists, and other specialists in Medical Devices, you will play a pivotal role in working on a range of projects aimed at creating life-saving and life-improving Medical Devices.
We are specifically looking for candidates with experience in Medical Devices, preferably in the areas of product design and product development. However, individuals from the life sciences sector with experience working under strict regulations will also be considered.
The ideal candidate would have a few years of industry experience and might be seeking their second role to advance their career. While a relevant degree in Mechanical Engineering or a related field is preferred, it is not essential if you have substantial experience as a Mechanical Design Engineer in the Medical Devices sector.
In return for your contributions, you will receive a competitive salary, regular salary reviews, bonuses, a pension plan, life assurance, and other outstanding benefits typically associated with larger organizations.
This is a fantastic opportunity to join a growing company that places a strong emphasis on staff development and career advancement. Due to the anticipated high level of interest, we encourage interested candidates to apply promptly to avoid missing out.
For further information, please feel free to contact Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will reach out to you.
Newton Colmore Consulting specializes in recruiting within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Electronics Engineer – Piezoelectronics – New Product Development – Cambridge
A growing Scientific Engineering organisation is currently seeking an Electronics Engineer to assist in the product development of new piezoelectronics technologies.
You will collaborate with a team of mechanical design engineers, software engineers, and scientists, making teamwork crucial. In this role, you will be the sole electronics specialist, so confidence in your abilities is essential.
Your responsibilities will include electronics design and PCB layout for the new piezoelectronics devices, as well as writing Embedded C software and using other software languages.
While having experience in piezoelectronics would be ideal, it is not a strict requirement. However, we do prefer candidates with experience in highly regulated fields such as Medical Devices, Biotechnology, Scientific Engineering, Pharmatech, or other scientific domains.
While working on cutting-edge technologies, you will also enjoy an excellent starting salary, a generous pension, annual bonuses, private medical cover, life assurance, and other benefits typically associated with larger organisations.
Given the expected high level of interest in this role, we recommend submitting your application promptly if you are interested. We are looking for someone to start relatively soon, though we understand that you may have a notice period.
The interview process will be swift, commencing with a video interview and progressing to an in-person interview. Part of the interview may involve a tour of their state-of-the-art facilities, which are currently being expanded to stay at the forefront of technological advances.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will get in touch with you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
An exclusive opportunity has become available to work for a prestigious manufacturing company based in Malton, North Yorkshire working 4 on 4 off days only. You will be offered a fantastic benefits package including 33 days annual leave, life assurance of 2 x basic salary, and overtime paid at time and a half to name a few. This position is working a 4 on 4 off, days only shift pattern.
This multi-site food manufacturer is ever-growing with their high-quality produce distributed across the major supermarkets in the UK. Deep-rooted in British farming, this well-established company has ties with local and UK-wide farmers creating a strong relationship within the community. You will be given the chance to upskill yourself and undergo additional training and qualifications to further develop your career as a Multi Skilled Engineer.
Roles and Responsibilities as a Multi Skilled Engineer:
Daily repairs and maintenance of fast-moving food manufacturing machinery
Identifying areas for continuous improvements
Covering both reactive and planned maintenance across the site
Fault finding and using root cause analysis
Effectively using the PPM system and updating and keeping to the maintenance schedule
I would love to see CVs from individuals who have:
A relevant qualification such as a City & Guilds Level 3, NVQ Level 3 or BTEC Level 3 (Apprenticeship), in either Electrical or Mechanical Engineering.
Experience within a Food or FMCG manufacturing environment.
Previously worked as a Multi Skilled Engineer, Maintenance Engineer, Electrical/Mechanical Engineer, Multi-Skilled Technician etc.
Benefits included as a Multi Skilled Engineer:
Pension at 8% employer / 8% employee
33 days annual leave
Life assurance of 2 x basic salary
Overtime paid at time and a half
Free onsite parking
Subsidised canteen
If you would like to find out more, please click apply or contact Megan Hepworth at E3 Recruitment on 01484 645269.....Read more...
