Role Overview
We are currently looking for a Controls Engineering Technician to join a leading manufacturing company based in the Plymouth area.
As the Day Shift Controls Engineering Technician, you will be working with the asset care team and providing control system support within the assembly production areas.
Key Duties and Responsibilities
Your duties as the Controls Engineering Technician will be varied however the key duties and responsibilities are as follows:
1. Implement improvements to TPM processes to increase OEE, liaise with department representatives to ensure that PM is successfully initiated and completed within the time frame.
2. Provide support to set-up and maintain pneumatic, hydraulic, and mechanical systems on production equipment.
3. Read electrical drawings, analyse, troubleshoot, and perform maintenance and repairs of any plant electrical systems (including, but not limited to, programmable controllers, servo motors, AC motors, contactors, etc.).
4. Connect to PLC machinery to help diagnose complex faults and make minor software changes, when required under the guidance of the process engineering team.
Role Requirements
To be successful in your application to this exciting role as the Day Shift Controls Engineering Technician we are looking to identify the following on your profile and past history:
1. Level 3 qualification in Electrical Engineering or Computer Science is essential.
2. Proven industry experience in working as a manufacturing engineer/technician with experience in fault finding and root cause analysis within a high-volume manufacturing environment.
3. Demonstrated knowledge and proficiency of PLC operations, robotics, Maintenance, Programming, and the ability to read schematics or machining, tooling design, tooling assembly, part drawings and pneumatic schematics.
Key Words: /Engineering Technician/ /Day Shift/ /Manufacturing/ /Plymouth/ /Production Processes/ /Mechanical Systems/ /Electro-mechanical/ /Process Improvement/ /Technical Skills/ /Leadership/Controls/Instrumentation/PLC/SCADA
Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer. We welcome applications from anyone who meets the role requirements. HRS exclusively supports the STEM sectors, combining recruitment expertise with scientific knowledge to help you advance your career.....Read more...
Mobile Pump Maintenance Engineer - London & South East - Up to £50,000 Exciting role to join a growing maintenance provider who is looking to expand their operation due to the acquisition of a pump division and bring in a specialist pump Maintenance engineers to supply this service to the existing portfolio of clients in London and South East as well as Birmingham.The company pride themselves on being a privately owned business where your opinion is valued and your voice heard. You will be joining their current mobile maintenance team and covering London and the South East on a range of commercial contracts including Hotels, Retail unitsThis would be someone with experience of servicing external submersible pump sets, installed internal fixed equipment and the occasional pump installation, normally replacement of existing, along with servicing of cold water booster sets and pressurisation units. The role will be covering London and the South East Including Milton Keynes and Birmingham with the majority of the work being in Central London. Hours of Work Monday - Friday 8am-5pm. RequirementsConfined Spaces would DesirablePump Maintenance ExperienceGood all round commercial maintenance knowledgeExtensive experience working within a commercial environmentsBuilding services knowledge with ideally additional mechanical / ac qualifications but not essential.Full Drivers LicenceBenefitsBasic Salary of up to £50,00020 days holiday + Bank HolidaysAnnual Salary reviewCompany Vehicle - No personal useFull company uniformPlenty of Overtime available ResponsibilitiesPump PPM & Reactive maintenanceBooster setsElectrical & Mechanical - Service / maintenanceMechanical / Hvac Knowledge.Extensive building services / pump knowledgePlease send your CV today to Ben Miller at Cbw Staffing Solutions avoid missing the opportunity....Read more...
Machine Tool Fitter
Machine Building Industry
Leicester, LE8
Days Shifts
Up to £25 per hour
Are you an experienced Mechanical Fitter within the machine tool manufacturing industry? If yes, read on .
Im excited to share an opportunity with a forward-thinking engineering company thats on the lookout for an Experienced Machine Tool Fitter. This is an ideal role for someone who thrives in high-precision environments and wants to utilise their engineering excellence to build automated machinery and machine tools to a exceptionally high level
The Role - Machine Tool Engineer:
- High-quality assembly of a wide variety of automation machinery
- Building from Schematic and or drawings
- Be able to alter and fabricate parts as required
- Building complete machinery from start to finish
- some occasional opportunities for working onsite
Minimum Skills / Experience Required - Machine Tool Fitter:
- Extensive experience in machine tool fitting or fitting of machinery
- Strong understanding and experience of complex mechanical systems
- The ability to work with minimal supervision and deliver high standards
- Problem-solving skills and attention to detail
- Motivated and excellent team player
- Able to commute to the LE8 area
The Package - Mechanical Fitter / Machine Tool Fitter:
- Basic rate up to £25 per hour
- Excellent progression opportunities
- Overtime available daily
About Precision People
Precision People is a leading recruitment agency that specialises in sourcing top talent for Engineering, Technical, Sales and Senior Management roles across a wide range of industries. With a focus on precision and quality, their team of expert recruiters works tirelessly to match the best candidates with the right employers, ensuring that both parties benefit from a successful partnership.
Precision People has the expertise and resources to help you find the perfect role. With a deep understanding of the industry and a commitment to excellence, they have built a reputation for delivering exceptional results and exceeding their candidates expectations.
Interested?
To apply for the Mechanical Fitter position, here are your two options:
1. "This is the job for me! When can I start?" - Call now and lets talk through your experience. Ask for Scott Lydon on 0116 254 5411 between 8.30am - 5.30pm
2. "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know
PPME....Read more...
Catfoss Recruitment Ltd are currently in partnership with an Energy Generation Asset Management company that is looking to recruit several BESS (Battery Energy Storage System) Field Service Engineers in several locations around the UK to their expanding team on a permanent basis.Field Service Engineers required for the following areas: Manchester/Sheffield area, Bristol/Swindon area, South East (Essex/Kent) areaThe Field Service Engineer (BESS) will perform preventative maintenance, troubleshooting and warranty repairs along with commissioning activities on energy storage units at various BESS sites. This role is to report to the O&M Manager.Field Service Engineer (BESS) - Tasks & Typical duties/responsibilities:• Maintain Energy Storage Systems to a high standard by carrying out regular inspection and maintenance, annual capacity tests, trouble shooting and reactive maintenance works • Perform system software and firmware upgrades• Monitor operation performance monitoring and data assessment• Provide phone support and remote diagnostics to customers• Troubleshoot equipment located at BESS sites• Manage spare parts• Responsible for safety work complying with local safety regulations and safety standards • Conduct risk assessment and implement safety measures• Keep up to date with any administrative duties such as timesheets, daily vehicle checks and providing daily job logs describing issues and actions taken during service trips• Assist the in-house system engineering group in product development and/or project work• Provide suggestions based on field experience, to improve the products Field Service Engineer (BESS) - Essential Requirements:• Qualification in an electrical/ electro-mechanical discipline• Previous electrical or multi skilled maintenance experience• Basic IT skills (Word Processing, Outlook, Excel, IP and software for troubleshooting)• Qualification of working on Site safely• This role involves travelling to different sites with occasional overnight stays. Field Service Engineer (BESS) - Preferred Experience but not essential:• Working experience with BESS• Working knowledge of HV/LV power electronics including Inverters / Converters / Transformers• Previous HVAC training and F-Gas qualification• Strong understanding of IT related subjects, CMD, remote desktop connections, networking (subnet, VLANs, static IP/DHCP), MODBUS/TCP protocols• C&G2391-5 Test & Inspect or equivalent • Familiar with BS7671• HV authorised personField Service Engineer (BESS) - We offer:• Competitive salary based on experience and qualification• Holidays • Workplace pension• Full training, company van, sim card, fuel card and laptop will be provided• Team building events and employee learning opportunitiesField Service Engineer (BESS) previous suitable job titles: Service Engineer, BESS Engineer, PV Engineer, PV Technician, Service Technician, BESS Technician, Solar Technician, Solar Engineer, Electrical Engineer, Electrical Technician, Battery Energy Storage Engineer, Battery Energy Storage TechnicianPlease apply ASAPDue to current high volumes of applications to our advertised jobs, we are unable to respond to every application. All successful candidates will be contacted as soon as possible.....Read more...
An exciting opportunity has arisen for a Mobile Plant Fitter / Service Engineer to join a well-established construction equipment sales and service company. This full-time role offers excellent benefits and a competitive salary.
As a Mobile Plant Fitter / Service Engineer, you will be overseeing regular maintenance activities, diagnosing, and addressing mechanical, electrical, and hydraulic issues, and executing repairs on a diverse range of heavy plant equipment.
What we are looking for:
* Previously worked as a Plant Fitter, Plant Mechanic, Plant Technician, Crane Engineer or in a similar role.
* Experience with Crawler cranes, mini cranes, telescopic crawler cranes, truck crane.
* Background working with Piling and soil mixing equipment
* Experience servicing the construction, civil engineering, piling, and ground engineering industries.
* Alternatively, a qualified candidate with strong hydraulics and electrics experience on heavy equipment, with training provided on the above machinery
* CPCS, City & Guilds, or equivalent qualifications in plant maintenance
* Ideally have heavy plant or crane experience.
If you have desirable skills and expertise, apply for an excellent Plant Fitter opportunity.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An exciting job opportunity has arisen for a Test and Repair Engineer – Electronics, to join a globally leading company, based in Gloucestershire, specialising in the design and manufacture of diagnostic instrumentation.
Due to exceptional growth, our client has recently relocated to new state of the art facilities, in Gloucestershire. They are now seeking a seeking a Test and Repair Engineer – Electronics, to join a dynamic team, responsible for diagnostics and fault finding on returned devices and conducting quality investigations.
Role and Responsibilities:
Perform diagnostic testing and fault analysis on devices returned under warranty.
Repair or replace defective components, ensuring devices meet operational specifications.
Document detailed findings and repair procedures, following internal repair protocols.
Conduct NCR investigations and root cause analysis for product failures.
Investigate customer complaints and warranty returns.
Skills and Qualifications:
Proven experience in diagnostics, fault finding, and repair of electronic or electro-mechanical devices
Experience with IPC-A-610 standards for electronic assembly and soldering quality and IPC -A-620 for requirements and acceptance of Cable and Wire Harness Assemblies.
Familiarity with electronic test equipment (oscilloscopes, multimeters) and software-based diagnostic tools.
Experience in conducting NCR investigations, including root cause analysis and corrective actions.
Relevant certifications such as IPC-A-610, IPC/WHMA-A-620, or similar industry-recognized qualifications are desirable.
To apply for this fantastic Test and Repair Engineer – Electronics opportunity, based in Gloucestershire, please send your CV to Sophie at SKhuttan@redlinegroup.Com quoting SKK1168. For more information please call 01582 878817 or 07961158586.....Read more...
An exciting opportunity has arisen for a Mobile Plant Fitter / Service Engineer to join a well-established construction equipment sales and service company. This full-time role offers excellent benefits and a competitive salary.
As a Mobile Plant Fitter / Service Engineer, you will be overseeing regular maintenance activities, diagnosing, and addressing mechanical, electrical, and hydraulic issues, and executing repairs on a diverse range of heavy plant equipment.
What we are looking for:
? Previously worked as a Plant Fitter, Plant Mechanic, Plant Technician, Crane Engineer or in a similar role.
? Experience with Crawler cranes, mini cranes, telescopic crawler cranes, truck crane.
? Background working with Piling and soil mixing equipment
? Experience servicing the construction, civil engineering, piling, and ground engineering industries.
? Alternatively, a qualified candidate with strong hydraulics and electrics experience on heavy equipment, with training provided on the above machinery
? CPCS, City & Guilds, or equivalent qualifications in plant maintenance
? Ideally have heavy plant or crane experience.
If you have desirable skills and expertise, apply for an excellent Plant Fitter opportunity.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Electrical Maintenance Engineer (Cover Engineer, Semi Static) - Wembley, North West London - £40,000 - £42,000 + Van and Fuel Card Are you looking to join one of the leading FM companies in the City?Are you looking for genuine career progression?I have a fantastic opportunity to work for one of the leading FM companies in London who are working on a contract across North London. You will mainly be based on a site in Wembley and you will cover six other sites across North London covering holiday and sickness. The role is paying up to £42,000 with a van and fuel card. PackageBasic Salary of £40,000 - £42,00025 Days Annual leave + Bank HolidaysVan and Fuel Card PensionPlenty of OT Available across the businessGenuine Career progression - would want the engineer to develop into supervisors and above.Training ProvidedHoursMonday to Friday - 07:00 - 16:00 or 08:00 -17:00Plenty of Overtime Available Duties Electrical and Mechanical PPM's and Reactive maintenanceGeneral building services tasksEmergency lighting, Fire alarms, FCU's, AHU's, HVAC plant, Water treatmentLandlord and Tenanted areas for large blue chip companies across the City & West EndWorking across a portfolio of 10 Buildings providing cover for holidays and sicknessRequirementsElectrical - City & Guilds Level 2 & 3 or Equivalent17th EditionClient FacingCommercial Building Maintenance ExperienceExperience in statutory compliance - Water treatment, Fire alarms, Emergency lighting, Etc ....Read more...
Catfoss Recruitment Ltd are currently in partnership with an Energy Generation Asset Management company that is looking to recruit several BESS (Battery Energy Storage System) Field Service Engineers in several locations around the UK to their expanding team on a permanent basis.Field Service Engineers required for the following areas: Manchester/Sheffield area, Bristol/Swindon area, South East (Essex/Kent) areaThe BESS Field Service Engineer will perform preventative maintenance, troubleshooting and warranty repairs along with commissioning activities on energy storage units at various BESS sites. This role is to report to the O&M Manager.Field Service Engineer (BESS) - Tasks & Typical duties/responsibilities:• Maintain Energy Storage Systems to a high standard by carrying out regular inspection and maintenance, annual capacity tests, trouble shooting and reactive maintenance works • Perform system software and firmware upgrades• Monitor operation performance monitoring and data assessment• Provide phone support and remote diagnostics to customers• Troubleshoot equipment located at BESS sites• Manage spare parts• Responsible for safety work complying with local safety regulations and safety standards • Conduct risk assessment and implement safety measures• Keep up to date with any administrative duties such as timesheets, daily vehicle checks and providing daily job logs describing issues and actions taken during service trips• Assist the in-house system engineering group in product development and/or project work• Provide suggestions based on field experience, to improve the products Field Service Engineer (BESS) - Essential Requirements:• Qualification in an electrical/ electro-mechanical discipline• Previous electrical or multi skilled maintenance experience• Basic IT skills (Word Processing, Outlook, Excel, IP and software for troubleshooting)• Qualification of working on Site safely• This role involves travelling to different sites with occasional overnight stays. Field Service Engineer (BESS) - Preferred Experience but not essential:• Working experience with BESS• Working knowledge of HV/LV power electronics including Inverters / Converters / Transformers• Previous HVAC training and F-Gas qualification• Strong understanding of IT related subjects, CMD, remote desktop connections, networking (subnet, VLANs, static IP/DHCP), MODBUS/TCP protocols• C&G2391-5 Test & Inspect or equivalent • Familiar with BS7671• HV authorised personField Service Engineer (BESS) - We offer:• Competitive salary based on experience and qualification• Holidays • Workplace pension• Full training, company van, sim card, fuel card and laptop will be provided• Team building events and employee learning opportunitiesField Service Engineer (BESS) previous suitable job titles: Service Engineer, BESS Engineer, PV Engineer, PV Technician, Service Technician, BESS Technician, Solar Technician, Solar Engineer, Electrical Engineer, Electrical Technician, Battery Energy Storage Engineer, Battery Energy Storage TechnicianPlease apply ASAPDue to current high volumes of applications to our advertised jobs, we are unable to respond to every application. All successful candidates will be contacted as soon as possible.....Read more...
Catfoss Recruitment Ltd are currently in partnership with an Energy Generation Asset Management company that is looking to recruit several BESS (Battery Energy Storage System) Field Service Engineers in several locations around the UK to their expanding team on a permanent basis.Field Service Engineers required for the following areas: Manchester/Sheffield area, Bristol/Swindon area, South East (Essex/Kent) areaThe BESS Field Service Engineer will perform preventative maintenance, troubleshooting and warranty repairs along with commissioning activities on energy storage units at various BESS sites. This role is to report to the O&M Manager.Field Service Engineer (BESS) - Tasks & Typical duties/responsibilities:• Maintain Energy Storage Systems to a high standard by carrying out regular inspection and maintenance, annual capacity tests, trouble shooting and reactive maintenance works • Perform system software and firmware upgrades• Monitor operation performance monitoring and data assessment• Provide phone support and remote diagnostics to customers• Troubleshoot equipment located at BESS sites• Manage spare parts• Responsible for safety work complying with local safety regulations and safety standards • Conduct risk assessment and implement safety measures• Keep up to date with any administrative duties such as timesheets, daily vehicle checks and providing daily job logs describing issues and actions taken during service trips• Assist the in-house system engineering group in product development and/or project work• Provide suggestions based on field experience, to improve the products Field Service Engineer (BESS) - Essential Requirements:• Qualification in an electrical/ electro-mechanical discipline• Previous electrical or multi skilled maintenance experience• Basic IT skills (Word Processing, Outlook, Excel, IP and software for troubleshooting)• Qualification of working on Site safely• This role involves travelling to different sites with occasional overnight stays. Field Service Engineer (BESS) - Preferred Experience but not essential:• Working experience with BESS• Working knowledge of HV/LV power electronics including Inverters / Converters / Transformers• Previous HVAC training and F-Gas qualification• Strong understanding of IT related subjects, CMD, remote desktop connections, networking (subnet, VLANs, static IP/DHCP), MODBUS/TCP protocols• C&G2391-5 Test & Inspect or equivalent • Familiar with BS7671• HV authorised personField Service Engineer (BESS) - We offer:• Competitive salary based on experience and qualification• Holidays • Workplace pension• Full training, company van, sim card, fuel card and laptop will be provided• Team building events and employee learning opportunitiesField Service Engineer (BESS) previous suitable job titles: Service Engineer, BESS Engineer, PV Engineer, PV Technician, Service Technician, BESS Technician, Solar Technician, Solar Engineer, Electrical Engineer, Electrical Technician, Battery Energy Storage Engineer, Battery Energy Storage TechnicianPlease apply ASAPDue to current high volumes of applications to our advertised jobs, we are unable to respond to every application. All successful candidates will be contacted as soon as possible.....Read more...
We are seeking an experienced Test Engineer to work alongside Senior Test Engineers and the Test Manager at space thruster test facilities.
Key Responsibilities:
Supporting site preparation, fuel handling, pressure systems, and instrumentation.
Lead the coordination and planning of test activities, including building new test facilities and test procedures.
Provide in-depth knowledge of space thruster theory, liquid propellant and high-pressure gas systems
Key Requirements:
Mechanical fitting or practical engineering skills (preferably gained through an apprenticeship or engineering-related organization).
A positive attitude with a willingness to learn and develop.
Ideally qualified to graduate level in a related engineering discipline.
Proficient in analysing test data and preparing detailed reports.
Excellent problem-solving skills and a logical approach to tasks.
Working with high-pressure gas systems and outdoor conditions....Read more...
We are seeking an experienced Test Engineer to work alongside Senior Test Engineers and the Test Manager at space thruster test facilities.
Key Responsibilities:
Supporting site preparation, fuel handling, pressure systems, and instrumentation.
Lead the coordination and planning of test activities, including building new test facilities and test procedures.
Provide in-depth knowledge of space thruster theory, liquid propellant and high-pressure gas systems
Key Requirements:
Mechanical fitting or practical engineering skills (preferably gained through an apprenticeship or engineering-related organization).
A positive attitude with a willingness to learn and develop.
Ideally qualified to graduate level in a related engineering discipline.
Proficient in analysing test data and preparing detailed reports.
Excellent problem-solving skills and a logical approach to tasks.
Working with high-pressure gas systems and outdoor conditions....Read more...
Support Bristol Airport mechanical engineers with ongoing and future development and asset replacement projects, including, but not limited to; HVAC, Potable Water Systems, Above & Below Ground drainage, Building Energy Management Systems (BEMS), Baggage Handling Systems, Lifts and Renewables
Learn to understand the creation and implementation of best practice mechanical engineering policies, practices, and processes, ensuring they reflect our strategic aims and Company values, and comply with all relevant legislation
Support on the development and implementation of technical specifications for all mechanical aspects of infrastructure developments, ensuring any new equipment or activity is supported by the appropriate qualification documentation and is maintained appropriately
Work alongside engineers on mechanical infrastructure projects across the business ensuring; Health, Safety and compliance are a top priority; projects achieve current industry best practices; project costs are fully recorded; and operational teams fully briefed as work progresses
Stay abreast of technological advances and regulatory changes, headlining potential impact and benefits to stakeholders and recommending solutions to ensure compliance and optimise performance
Analyse and review energy consumption to identify potential savings and efficiencies as part of our Continuous Improvement journey to reduce costs, improve passenger experiences, and reduce energy consumption
Assist with technical investigations into equipment failures, identifying the root cause, developing, and implementing a long-term solution to prevent recurrence
Support with the development of business cases and prepare supporting paperwork to gain financial approval for project works, whilst reviewing and evaluating the whole life costs and aligning with our Asset Management model
Please be aware that if your application is progressed, then an Assessment Centre will be taking place at Bristol Airport on Thursday, 17th April 2025 and will run for 3-4 hours. Training:
You will be pursuing a Level 6 Apprenticeship Standard in Mechanical Engineering with Manufacturing, through Weston College
As part of this program, you will attend Weston College as instructed by the college
An assessor will conduct on-site observation to evaluate your progress, as well as supporting you in college throughout your apprenticeship
At the conclusion of your program, your qualification will be assessed through an End Point Assessment
Training Outcome:
Potential opportunity to continue your career here at the airport, becoming a full-time member of the team as a qualified mechanical engineer
Supported by additional training where required
Employer Description:Bristol Airport is the South West's gateway to the world, with flights to over 125 destinations. We have ambitious plans, from supporting our strong business recovery to continuing our success with our long-term sustainability strategy. We want to connect our region responsibly. The ultimate vision is to be everyone’s favourite airport, delivering a future we can be proud of. It’s an incredibly exciting time to work at Bristol Airport and working in the Mechanical Engineering team is no exception!Working Hours :Monday- Friday
Shifts to be confirmedSkills: Communication skills,IT skills,Organisation skills,Problem solving skills,Number skills....Read more...
Recruit4staff are proud to be representing their client, a leading manufacturing company, in their search for a CNC Setter Operator to work in their manufacturing facility in Liverpool.What our client is offering for the successful CNC Setter Operator:
Salary: £33,930 - £35,334 per annum inclusive of shift premium (DOE)
£29,000 - £30,200 basic salary (DOE) plus 17% shift premium
Working hours:
Week 1: Monday - Wednesday 05:55-17:40 (11.75 hours)Week 2 Thursday - Saturday 05:55-17:40 (11.75 hours)
15 shift holidays (equivalent to 25 days 3/5ths) plus bank holidays off. Permanent positionIf you are off shift on a bank holiday, you get a day back in lieu.Life assurance x4 salaryIncome Protection SchemeAuto Enrolment Pension (E’EE 5% and E’ER 4%)Breakdown CoverCycle to Work SchemeAccess to mental health & wellbeing resourcesHighstreet discounts and perks
The Role - CNC Setter Operator:
Setting and operating of Fanuc controlled CNC lathes and vertical machining centres, as well as multi-axis turn/mill machining centres.Manufacture components using precision engineering toolsSet up and operation of a range of multi-axis CNC machine toolsQuality checking productsUse of hard gauging and CMM equipment to ensure product quality with fine tolerancesWorking in stainless steels and heat resistant super alloysWorking from engineering drawings
What our client is looking for in the successful CNC Setter/Operator:
NVQ/City & Guilds qualified or equivalent in a relevant mechanical engineering discipline, preferably within manufacturing engineeringPrevious experience in a similar precision engineering based role - ESSENTIALGood knowledge of setting and operating Fanuc controlled CNC lathes and vertical machining centre - ESSENTIALStrong understanding of ISO programmingCapable of reading and interpreting technical drawings and documentation - ESSENTIALExperience in the setup and operation of Mazak Integrex machine tools - BENEFICIALKnowledge of Mazatrol Smooth Control - BENEFICIALExperience of twin turret, twin spindle machining - BENEFICIAL
Key skills or similar Job titles: Manufacturing Engineer, Manufacturing Technician, Mechanical Engineer, Precision Engineer, CNC Programmer, CNC Setter, CNC Machinist, CNC Miller, CNC Turner, CNC Setter/Operator Commutable From: Liverpool, Widnes, Runcorn, St Helens, Warrington, Birkenhead, Skelmersdale For further information about this and other positions please apply now. This vacancy is being advertised on behalf of Recruit4staff (NW) who are operating as a recruitment agency, agent, agencies, employment agency or employment business.....Read more...
Field Service Engineer London (South) £30,000 - £40,000 Basic + Overtime (OTE £45,000+) + Pension + Company Vehicle + Training + Immediate Start Join a leading company in the waste management industry and earn a leading salary and package as a Field Service Engineer. Great opportunity to be part of a team that will offer loads of work life balance and flexibility as well as a job for life for the right candidate. As a well-established market leader, the company offers flexibility and a family-oriented culture. If you're a field service engineer that wants to be valued in a company with a great culture as well as earning a leading salary, this is the role for you. The Field Service Engineer role will include:
Performing maintenance, repairs, and troubleshooting on balers and compactors at client locations.
Conducting routine servicing and preventive maintenance to minimise equipment downtime and extend lifespan.
Communicating directly with clients to diagnose issues and explain work completed in a clear, professional manner.
The successful Field Service Engineer will have:
Experience servicing and maintaining compactors and balers
OR Ability to interpret hydraulic and electrical circuit diagrams.
Proficiency with various electrical and hydraulic test equipment.
NVQ Level 2 in Compact Plant Operations (or equivalent) and qualifications in electrical and mechanical engineering.
A full UK driving license.
Strong communication skills and the ability to work independently.
For immediate consideration, contact Wesley on 020 3411 4199 or apply today. Keywords: Field Service Engineer, Waste Management, Baler, Compactor, Hydraulic Systems, Electrical Systems, Preventive Maintenance, Technical Service, Engineering, London, United Kingdom. This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website at futureengineer.co.uk to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants; however, due to the sheer volume of responses, we can only guarantee that shortlisted candidates will be contacted. ....Read more...
Due to the high security nature of the business, employees may require background checks and security clearance when visiting customer sites.
Electrical/Mechanical Engineer
Role and responsibilities
Design electrical systems and produce wiring diagrams.
PLC programming - writing PLC software.
Design mechanical parts and produce drawings/models.
Fault finding and problem solving.
Installing and commissioning equipment at customer sites.
Providing customer training and support.
Skills and experienceElectronics experience to be able to design electrical systems and produce wiring diagrams. (3ph, single-phase, analogue and digital systems)Ability to write PLC software. (Siemens/Panasonic desirable)CAD experience (Autocad or Solidworks preferable but not essential)Fault finding and problem solving skills and experience.Willingness to travel overseas as required (approx. 2-6 times per year/duration of 2-14 days per trip) for installations and fault finding at customer site.Experience in hydraulic and pneumatic systems desirable.Experience using core Microsoft 365 applications.Good interpersonal and communication skills.Ability to work independently.
Does this role fit your skill sets? Please press apply and your CV will be reviewed. If you don't hear anything back within 7 days, please assume you have been unsuccessful in your application. ....Read more...
Flexible working hours, company pension contributions of up to 8% and an annual leave entitlement of 25 days plus Bank Holidays are just a few of the perks that the Senior Design Engineer will enjoy whilst working for a Global Engineering and Manufacturing leader, with over 20 worldwide locations employing 1000 + staff. This employer is recognised globally for quality and innovative deliverables.The successful Senior Design Engineer will be easily able to commute to HUDDERSFIELD from surrounding towns & cities, including Leeds, Dewsbury, Halifax, Wakefield and Brighouse.Key Responsibilities of the Senior Design Engineer will include:
Develop new designs or re-engineer existing designs for new applications using AutoCAD 2D & 3D to an expert level, including Solid Edge.
Create detailed component and assembly drawings
Create and maintain accurate documentation including BOM’s, Proposals, Manuals and Maintenance instructions for designs.
Interpret customer specifications and design standards
Participate in Design/Process Failure Mode and Effect Analysis (DFMEA/PFMEA) activities
Reporting to the Technical Authority, Engineering Resource Manager and Engineering Director
For the Senior Design Engineer role, we are keen to receive CV’s from candidates who possess:
Experience as a Senior Design Engineer or similar within an Engineering environment
Demonstrable understanding of material selection,
Strong understanding of industry standards such as ISO, AGMA, DIN and FKM to name a few.
Bachelors Degree in Mechanical Engineering and or CEng
Experience using SAP MRP
Salary & Benefits:
up to £65,000 depending on experience
Flexible working hours
Monday to Friday
37.5 hours per week
25 Days annual leave + Bank holidays
Company pension contributions of up to 8%
Please be aware that many roles working for our client will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.You must meet Right to Work in the UK criteria and achieve the required security and clearance requirements to undertake this role.To apply for the Senior Design Engineer role, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Alex Feather at E3 Recruitment for more information. ....Read more...
R&D Test Engineer – Biotechnology
A growing biotechnology inventor in Cambridge are searching for an experienced research and development test engineer to join their in-house testing team.
As a R&D Test Engineer within this organisation, you will be utilising your experience to determine the performance and reliability of brand-new physical products within the biotechnology space.
You will be charged with building prototypes and designing and running experiments to gather performance data on new products at the intersection of science and engineering, meaning you will be working alongside physicists, scientists, and engineers.
It will be your role in ensure that exciting new breakthrough products can make the successful transition from initial concept to manufacturing. This will be done by creating bespoke prototypes and testing programmes which will provide detailed data and insights that can be translated into real-world improvements.
To be considered for this role, we are ideally looking for a candidate who has the following;
Hands-on experience with making and testing prototypes in industry.
Strong data analysis skills and sensor performance testing experience.
Ideally STEM-degree educated.
As well as providing a great opportunity for you to work on a brand-new products within a fast-paced environment the company is offering competitive packages and opportunities for career growth.
For more information, please call Matthew Lowdon of Newton Colmore Consulting on 0044 121 268 2240 or make an application and one of our team will be in touch.
Newton Colmore Consulting is a highly specialist recruitment consultancy operating within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors throughout Europe and the US.
Key words: Test Engineer, Mechanical Engineering, CAD, SolidWorks, Cambridge, Instrumentation, Fluidics, Sensors, Biotechnology....Read more...
Your Next Challenge Awaits!
Are you an experienced On-Site Machining Engineer looking for an exciting opportunity to work with cutting-edge CNC machinery? Do you thrive in a dynamic, hands-on environment where your expertise is valued and your problem-solving skills make a real impact?
We are looking for a highly skilled and motivated engineer to service, maintain, and repair CNC machines across a range of industries. If you're someone who enjoys working with high-tech machinery, solving complex mechanical and electrical issues, and keeping operations running at peak performance, then this role is for you!
What Youll Be Doing as a Machining Engineer:
CNC Machine Maintenance & Repair
- Service and repair CNC machines including Index, Chiron, Mazak, and Citizen models.
- Diagnose faults using PLC systems and troubleshoot issues effectively.
- Maintain and optimise servo systems (Siemens experience is a plus).
Problem-Solving & Continuous Improvement
- Work proactively to identify and implement process improvements.
- Maintain high-quality standards while working under pressure.
- Collaborate with teams to enhance operational efficiency.
Health & Safety Compliance
- Ensure all maintenance activities follow strict Health & Safety guidelines.
- Work efficiently to meet company deadlines and schedules.
What Were Looking For in a Machining Engineer:
- Fault Diagnosis Skills
- Ability to identify issues using PLC systems and troubleshoot effectively.
- Hands-on experience Ideally with tool room work, fixture manufacturing, and component re-work.
- Proactive and innovative mindset Always looking for ways to improve processes and efficiency.
- Great communication skills Able to work with all levels of the business and explain technical issues clearly.
- Strong CNC knowledge Experience in servicing, maintaining, and repairing CNC machines.
- Flexible and adaptable Willing to take on varied workloads, including site maintenance tasks.
Whats in It for You?
- Competitive Salary Get paid what you're worth!
- Monday to Friday Schedule Enjoy work-life balance with an early finish on Fridays
- Career Growth Work with high-tech CNC equipment and develop your expertise.
- Supportive Team Environment Join a company that values and invests in its people.
Apply Today! If youre looking for a challenging and rewarding career in CNC machining and maintenance, we want to hear from you!
Call Ian at Holt Engineering on 07734406996 for more information.....Read more...
Embedded Software Engineer – Biotech or Medical Devices – Cambridge
An established and growing Biotech and Medical Devices company, based in Cambridge, is currently looking for an Embedded Software Engineer to join them and take responsibility for the continued development of their software on electro-mechanical devices that are used in the biotech and medical devices sectors.
Based in Cambridge, you will be working alongside scientists, engineers, designers, physicists and other medical devices and biotech industry experts in the development this cutting-edge medical device.
Ideally, you will have worked within the Biotech or Medical Devices sectors previously and have knowledge of ISO 13485, IEC 62304 and ISO 14971.
The company has the unique ability to offer an excellent benefits package, pension, medical insurance, life assurance and some other excellent benefits alongside a competitive starting salary.
We are looking for someone to start as soon as possible and interviews will happen quickly, with this in mind, if you are interested in the role, I suggest making an application now or risk missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you.
....Read more...
Robotics Service EngineerWolverhampton £45,000 - £55,000 + Yearly Bonus + Company Van + Clear Pathway Into Management + Additional Qualifications + Early Friday Finish + Private Healthcare + 32 Days Holiday + New Laptop & Phone + Work Away
About the Role: Are you a skilled Robotics Service Engineer ready to take your career to new heights with a company offering clear and exciting opportunities for progression into a senior role? This is your chance to work with cutting-edge technology while joining a company that places a strong emphasis on training and development.In this role, you’ll be on the move, handling repairs, maintenance, and installations of advanced robotic systems. If you're eager to elevate your career and step into a senior leadership position, this is the perfect opportunity for you! Join a company that's not only a fantastic place to work but also boasts an outstanding reputation in the industry.
Key Responsibilities:
Repair, service, and install robotic equipment
Read and follow circuit diagrams
Working away
Requirements:
Electrical bias (essential), mechanical experience is a bonus
Experience with circuit diagrams and troubleshooting
Valid passport (for training)
....Read more...
Assembly Fitters are needed, Salary Circa £23,000 a year, with an early finish on a Friday, permanent contract available after completing 12 week probation period. Full training is given and the workshop is clean and organised. Location South Elmsall, easily accessible from Doncaster, Barnsley, WakefieldThis position would suit somebody confident using hand tools, power tools, likes working in a team in a modern clean organised environment.A good attitude is key and if you are someone that would like to join a growing manufacturing business that has a strong order book and has big plans for the future. If you have worked as a Vehicle builder, Coachbuilder, Vehicle Mechanic, Vehicle Technician, Maintenance Engineer, Mechanical assembler Mechanical Fitter, Joiner, Manufacturing Technician, Production operative, joiner, etc we would be very keen to speak to you.Duties of the Assembly FitterUsing hand, tools power tools - full training given Building Vehicles on a production lineFollowing build instructions The person Assembly FitterIdeally worked in a manufacturing or production environment (not essential)Happy to receive training using hand and power tools Benefits of the Assembly Fitter roleEasily accessible from Doncaster, Wakefield, Barnsleygrowing companyClean modern working environmentImmediate start from interview available If this is of interest to you click ‘APPLY NOW’.
Please contact Joe Reid at E3 Recruitment if you would like to discuss this role.....Read more...
Electrical Shift Maintenance Engineer - Canary Wharf, East London - Up to £49,000 I have a fantastic opportunities to work for a large maintenance company working in the Canary Wharf, East London working at a large corporate commercial office buildings on behalf of a large property management company. You will carry out PPM's and reactive maintenance, statutory compliance and general building maintenance tasks. My client is looking for a Multi-skilled Electrical Maintenance Engineer with experience in building services to work in a High profile corporate Head office and due to the nature of the client you will be required to pass a security check. HoursContinental Shift Days and Nights - 07:00am - 19:00pm / 19:00pm- 07:00am RequirementsApprentice TrainedElectrical - City & Guilds Level 2 and 3 or Equivalent17th/18th EditionClient FacingCommercial Building Maintenance ExperiencePackageBasic Salary of £49,00022 Days Annual leave PensionHealthcarePlenty of OTInternal and External Training coursesCareer progression - would want the engineer to develop into supervisors and above.DutiesElectrical and Mechanical PPM's and Reactive maintenanceGeneral building services tasksEmergency lighting, Fire alarms, FCU's, AHU's, HVAC plant, Water treatmentThree Phase and Single Phase Systems, Building Management Systems & Electrical Monitoring.Air Conditioning & Chillers, Pumps, Motors & Variable Speed Drive.Working on a Large blue chip companies commercial officesWorking as part of a small maintenance team to deliver a great service to the clientMy client is able to interview straight away if the right candidates are available so to avoid missing out please send your CV today to Dan Barber at CBW Staffing Solutions ....Read more...
Field Service EngineerNottingham £36,000 - £42,000 + ( Optional Overtime Available) + Family Run + Company Annual Bonus + Additional Training + Qualifications + Van + Supportive Family Feel Culture + Growing Company + Door To Door + Health Insurance + Work Away + No Weekends
Fantastic opportunity to join a family owned business where you will be working within a tight knit team and be home every weekend! If you are looking for a Field service engineer position within a recession proof sector and the chance to work closely with the director, then this is for you! This company offers a comprehensive training program and the opportunity to gain a variety of additional qualifications. As a Field Service Engineer, you will have the chance to work on cutting-edge projects and be part of a supportive, team-oriented environment that values their staff. If you have an electrical background and are eager to enhance your skills, this role offers an excellent opportunity for you to develop in a fast-paced and rewarding industry.
Your Role as a Field Service Engineer Will Include:
Installing and servicing filtration systems at various industrial sites across the UK and Ireland.
15% work away from home all expenses paid.
Ensuring compliance with health, safety, and environmental standards during installations.
As A Field Service Engineer You Will Need to Have:
Electrically qualified
Strong understanding of electrical fault finding and maintenance.
UK Passport.
Electrical, Field Service Engineer, Midlands, Electrical Engineering, Electrical Systems, Fault Finding, Maintenance, Installation, Troubleshooting, Electrical Equipment, Preventive Maintenance, Reactive Maintenance, PLC, SCADA, Control Systems, Circuit Boards, Wiring, Testing, Diagnostic Tools, Fault Diagnosis, Electrical Panels, Switchgear, Industrial Electrical, High Voltage, Low Voltage, Electrical Compliance, Risk Assessment, Health and Safety, Service Reports, Technical Support, Client Relations, Electrical Schematics, Power Distribution, Automation, Mechanical Skills, AC/DC Motors, Electrical Certification, City & Guilds, NVQ Level 3, 17th Edition, 18th Edition, Multi-site, Remote Working, On-site Service, Customer Service, Project Support, Time Management, Engineering Support, Electrical Faults, Equipment Calibration, Calibration Reports, Service Maintenance Contracts, Troubleshooting, Field-based Role, Electrical Installations, Site Surveys, Project Management, Electrical Troubleshooting, Product Training, Customer-Focused, Electrical Testing Equipment, Energy Efficiency, Preventative Inspections, Problem Solving, Site Visits, Technical Knowledge, Electrical Standards, Electrical Safety Regulations, Service Schedules, Technical Support, Equipment Installation, Machine Maintenance, Fault Reports, Electrical Repairs, Commissioning, Site Safety, Engineering Background, Electrical Wiring, Power Systems, Electrical Testing, Cabling, Remote Diagnostics, Service Coordination, Engineering Solutions, Power Equipment, Equipment Installation, Site Maintenance, Electrical Upgrades, Machine Fault Diagnostics....Read more...
Fitter/Welder Fabricator £16.60 Private medical contributions for employee & family (50%). Pension scheme. 23 days holiday + public holidays. Holidays increase with 1 day per year served. 0830-1630. Overtime regularly availableA leading Automotive Engineering business, the company are recruiting for a Welder Fabricator/Fitter. This is a varied role, which includes mechanical fitting, fabrication and welding. The ideal candidate would be able to MIG and TIG (however the company would be able to train someone in TIG welding if they wanted to learn this skill).Key Duties of the Fitter/Welder Fabricator position:
MIG/TIG working predominately with Mild Steel, Stainless Steel
Fabrication of Mounting brackets.
Fit and install, commission and test equipment fitted to vehicles on or off-site.
Desirable work experience with:
Hydraulic or pneumatic systems
Worked within the Automotive sector
We would be very keen to speak to people who have experience welding and working in the following roles: HGV Technician. Plant Fitter, Hydraulic engineer, Vehicle technician Forklift truck engineer. Benefits of the Fitter/Welder Fabricator role:
£16.80 an hr plus, company bonus
Private Medical Insurance
Days/No shifts
Regular overtime available
Holiday increase 1 day per every year served
If you would like a private chat about the Fitter/Welder Fabricator role, please contact Rodger Morley at E3 Recruitment.....Read more...
