Our client, a leading designer and manufacturer of life safety technology, are looking for an Electronics Engineer to join their team in Cambridge on a permanent basis.
This is an exciting opportunity to work on the design and development of high-reliability electronic products, taking ownership of projects throughout the full product lifecycle, from concept and prototyping through to certification and production.
Key responsibilities of the Electronics Engineer job based in Cambridge:
Design and develop analogue, mixed-signal and embedded electronic circuits for innovative products.
Perform circuit simulation, schematic capture and PCB layout using Altium Designer.
Develop prototypes, proof-of-concept designs and support board bring-up activities.
Define and execute design verification and validation (V&V) plans, including testing and performance validation.
Support New Product Introduction (NPI) activities and work closely with manufacturing partners.
Contribute to product architecture, design reviews and cost optimisation initiatives.
Investigate product failures, perform root cause analysis and implement corrective actions.
Support compliance and certification activities, preparing technical documentation where required.
Collaborate with multidisciplinary engineering teams including software, mechanical, manufacturing and compliance engineers.
Experience required for the Electronics Engineer job based in Cambridge:
Degree in Electronics Engineering, Electrical Engineering or a related discipline.
Experience in an electronics design and development environment.
Strong practical experience in analogue and mixed-signal electronic circuit design.
Proficiency with PCB design tools, ideally Altium Designer.
Experience in electronic prototyping, testing and debugging.
Good understanding of the complete electronic product development lifecycle.
Strong communication skills with the ability to work effectively within multidisciplinary teams.
If this Electronics Engineer job based in Cambridge could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816.....Read more...
Medical Devices Consultant – Senior Mechanical Engineer – Cambridge
Due to the growth of a leading Medical Devices organisation, we are currently seeking a Senior Mechanical Engineer, Project Manager, Medical Devices Inventor, or Mechanical Design Consultant for a newly approved role. The company is based in Cambridge and boasts some of the most impressive labs globally, which they are currently enhancing even further.
You will collaborate with other experts in Medical Devices who have backgrounds in Mechanical Engineering, Mechanical Design, Electronics Design, Electronics Engineering, Physical Engineering, Biomedical Sciences, and various other skills essential for inventing Medical Technology. Consequently, teamwork will be crucial.
In this role, you will lead projects, necessitating experience as a consultant, project manager, or another role involving interactions with third parties. Additionally, you will apply your skills hands-on, directly contributing to the development of new Medical Devices.
We require several years of experience in Mechanical Design of Medical Devices. Familiarity with any 3D CAD tool is acceptable, as we understand that you can be trained on the necessary tools when required. However, knowledge of SolidWorks would be advantageous.
Most individuals in similar roles hold a degree in a Mechanical Engineering field, but experience takes precedence.
In terms of experience, we welcome candidates ranging from those stepping up to a Senior Mechanical Engineer role to individuals with several years of experience as a Medical Devices Consultant or Senior Mechanical Engineer.
This organisation has an outstanding track record of fostering continuous learning to keep you at the forefront of the Medical Devices sector. Consequently, opportunities for career and skills development are always available.
In addition to these benefits, you will receive an excellent salary (commensurate with your level of experience), a substantial bonus, a generous pension plan, healthcare coverage, complimentary meals throughout the day, life assurance, access to social clubs, wellness programs, an onsite gym, and other exceptional perks that are not commonly offered by most companies.
We anticipate substantial interest in this role, so if you are interested, we recommend submitting your application promptly. The organisation is open to candidates with varying levels of experience. If you possess some of the required skills but not all, it may still be worth applying as training could be provided (though you must have industry experience as a Mechanical Engineer or Mechanical Designer for Medical Devices as a minimum).
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will contact you.
Newton Colmore Consulting is a specialised recruitment company operating within the fields of Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Our client, a world leader in advanced RF and microwave technology, are looking for a PCB Layout Engineer based in Cambridge to join their team on a permanent basis.
This is an exciting opportunity to work on complex, high-performance electronic systems, supporting the development of cutting-edge products across telecoms, space, and defence sectors. The role goes beyond traditional PCB layout, combining design expertise with a strong understanding of engineering principles and manufacturability.
Key responsibilities of the PCB Layout Engineer job based in Cambridge:
Own PCB layout activities across complex electronic products and subsystems.
Translate schematic designs into high-quality PCB layouts meeting electrical, mechanical, thermal, and manufacturing requirements.
Design with consideration for impedance control, grounding, power distribution, thermal management, and EMC performance.
Support high-speed digital interfaces such as Ethernet, DDR, LVDS, PCIe, and JESD204.
Generate full fabrication, assembly, and manufacturing documentation packages.
Participate in design reviews, DFM/DFA assessments, and engineering risk reviews.
Verify component footprints, symbols, and libraries against datasheets.
Support continuous improvement of PCB standards, libraries, and design processes.
Work with suppliers and manufacturing partners to resolve production challenges.
Support prototype builds, board bring-up, and investigation of PCB-related issues.
Experience required for the PCB Layout Engineer job based in Cambridge:
Strong PCB layout experience using Altium Designer and Altium 365.
Experience taking PCB designs from schematic through to manufacturing release.
Good understanding of PCB stack-ups, signal integrity, power integrity, thermal design, and EMC.
Experience working with mixed-signal, digital, power, and RF-related designs.
Ability to interpret schematics and understand engineering intent.
Experience creating and validating component footprints and libraries.
Knowledge of PCB fabrication, SMT assembly, and DFM/DFA processes.
Strong attention to detail and ability to work within multidisciplinary teams.
This is an excellent opportunity to join a highly collaborative and innovative engineering team, working on cutting-edge RF technologies and contributing to products used in critical communications and advanced applications.
If this PCB Layout Engineer job based in Cambridge could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816.....Read more...
As an Engineering Apprentice at TROX, you will have the opportunity to experience the full range of engineering activities within a world-leading HVAC manufacturing business.
During your apprenticeship, you will work across multiple departments, gaining practical experience and developing an understanding of how our products are designed, manufactured, tested and supported throughout their lifecycle.
You will work alongside experienced engineers and teams across the business, building technical knowledge, practical skills and an understanding of how different engineering disciplines work together.
Your apprenticeship will include experience in areas such as:
Production
Follow the journey of our products from raw materials through manufacturing and final assembly. Learn how production processes work, develop practical skills using machine tools, and understand how information flows through the manufacturing process.
Design Engineering
Develop CAD skills and apply engineering principles to support the design, development and modification of products, helping turn ideas into practical solutions.
Configuration & Engineering Systems
Learn how products are configured within our ERP systems to create accurate costings and provide the information required for manufacturing and business operations.
Production Engineering
Understand how manufacturing processes are developed and improved. Learn about production methods, equipment, problem-solving techniques and how new products are introduced.
Quality Engineering
Discover how we ensure our products and processes meet the required standards by learning about quality control, inspection and continuous improvement.
Supply Chain & Planning
Gain an understanding of how manufacturing is planned, how materials are sourced and how suppliers support the production process.
Contracts & Project Management
Learn how engineering projects are managed from initial concept through to delivery, ensuring customer requirements and expectations are achieved.
Technical Engineering
Develop an in-depth understanding of our products, how they operate and how technical information is created and shared. Support customers by helping them select the right solutions and resolve technical challenges.
Laboratory & Product Testing
Learn how our products are tested and evaluated to ensure performance requirements are achieved. Work with engineers to investigate solutions and simulate real-world operating conditions.
Works Engineering & Maintenance
Understand how manufacturing equipment operates, how machinery is maintained and how production areas are improved through new equipment and technology.
Service Engineering
See how our products perform in real-world environments. Learn how engineers diagnose issues, support customers and provide effective solutions.
This apprenticeship will give you a broad foundation in engineering and the opportunity to discover which areas interest you most, while developing the skills and experience needed for a successful career in engineering.Training:
The learner will be studying the Engineering Technician Level 3 Apprenticeship Standard qualification
Day release to West Suffolk College
Training Outcome:The Engineering Apprentice will gain practical experience across several of engineering disciplines so there is the potential of furthering their career and continued learning in either mechanical engineering, Design Engineering or Production Engineering which ever discipline is most suited to the apprentice and the business as a full time role upon completion of the apprenticeship.Employer Description:TROX UK is a leading designer and manufacturer of HVAC and building services components and integrated systems for air conditioning, ventilation and fire safety. As part of the global TROX GROUP we were the first international subsidiary (today one of 34 subsidiaries worldwide), and having now reached over 60 years of trading operations in the UK market and a centre of excellence, our outstanding design expertise and quality manufacturing standards keeps us at the forefront of product innovation.
TROX UK has a manufacturing facility and offices in Thetford, Norfolk and an office in the City of London with 159 employees. We have provided our products, support and expertise on many of the most prestigious landmark commercial development construction and infrastructure projects throughout the UK, delivering for some of the most recognised global brands.Working Hours :08:00 - 16:30, Monday - Thursday, with a 30 minute unpaid meal break. 5.5 hour shift on a Friday, normally 08:00 - 14:00.Skills: Communication skills,Attention to detail,Organisation skills,Analytical skills,Logical,Team working,Initiative....Read more...
