Calibration Technician to join their dynamic laboratory team responsible for calibrating and maintaining electrical, mechanical, and electronic measuring instruments in a fast paced lab environment.
Skills
Lab calibration experience.
Numerate, literate, and PC literate with Microsoft software knowledge.
Diagnostic abilities, and interest in instruments or metrology.
Role
UKAS accredited calibrations under ISO 9001 & ISO/IEC 17025 systems.
Test, calibrate, and repair instruments.
Prepare instruments for hire and perform return checks.
Maintain accurate records and generate calibration certificates.....Read more...
Calibration Technician to join their dynamic laboratory team responsible for calibrating and maintaining electrical, mechanical, and electronic measuring instruments in a fast paced lab environment.
Skills
Lab calibration experience.
Numerate, literate, and PC literate with Microsoft software knowledge.
Diagnostic abilities, and interest in instruments or metrology.
Role
UKAS accredited calibrations under ISO 9001 & ISO/IEC 17025 systems.
Test, calibrate, and repair instruments.
Prepare instruments for hire and perform return checks.
Maintain accurate records and generate calibration certificates.....Read more...
Are you an experienced technician or engineer with a background in laboratory calibration? We are seeking a skilled individual to join our dynamic team, specializing in the calibration of temperature, dimensional, torque, pressure, frequency, vibration, and more.
Requirements
Degree, HND, HNC, NVQ or BTEC.
Calibration processes experience ideally UKAS certification.
IT and database skills, SAP experience is a plus.
Role
Calibrate measuring equipment in a state of the art UKAS accredited laboratory.
Maintain records of calibration, ensuring traceability and audit compliance.
Liaise with suppliers for specialist calibration and maintain calibration certification.
Assist in improving procedures and ensuring QHSE standards are met.....Read more...
Are you an experienced technician or engineer with a background in laboratory calibration? We are seeking a skilled individual to join our dynamic team, specializing in the calibration of temperature, dimensional, torque, pressure, frequency, vibration, and more.
Requirements
Degree, HND, HNC, NVQ or BTEC.
Calibration processes experience ideally UKAS certification.
IT and database skills, SAP experience is a plus.
Role
Calibrate measuring equipment in a state of the art UKAS accredited laboratory.
Maintain records of calibration, ensuring traceability and audit compliance.
Liaise with suppliers for specialist calibration and maintain calibration certification.
Assist in improving procedures and ensuring QHSE standards are met.....Read more...
Using a variety of machines to manufacture components within a Submarine build, ranging from manually operated machines such as lathes and milling machines, to Tornado (CNC lathe) and the Storm (CNC mill)
You would learn skills such as turning, threading, milling, tapping and boring
Measuring and checking the components produced, adjusting the machinery and software to ensure the components meet the necessary specifications
Paying close attention to tolerances, which range from 0.5mm to as little as 0.02mm by utilising a range of measuring devices such as micrometres, vernier callipers, slip gauges and screw thread gauges
Training:Machining Technician Level 3.
An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.Training Outcome:Approximately 95% of apprentices choose to stay on with us. As a global business there are a world of opportunities - whether you decide to stay in the UK, or explore an overseas role.Employer Description:At BAE Systems, we provide some of the world’s most advanced, technology-led defence, aerospace and security solutions. We employ a skilled workforce of more than 93,000 people in around 40 countries. Working with customers and local partners, we develop, engineer, manufacture, and support products and systems to deliver military capability, protect national security, and keep critical information and infrastructure secure.Working Hours :Shifts to be confirmed.Skills: Communication skills,Organisation skills,Team working....Read more...
Test Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: PCB, Testing, Electronics
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We are seeking a skilled Test Engineer to join our client's team, who is responsible for developing test requirements, creating test instructions, and testing PCBs, assemblies, and systems. The ideal candidate will have a strong background in electronics and measurement technology, with practical experience in handling measuring equipment and a good understanding of radio frequency and power engineering.
Main Responsabilities:
Development of test requirements and new test methods in collaboration with the development department
Creation of test instructions and test reports
Testing, repairing (requires e.g. soldering skills) and commissioning of PCB’s, assemblies and systems as well as participation in tests in the test field
Checking production orders and goods receipt material according to quality characteristics
Perform factory inspections with customers
Management of measuring equipment storage
Construction of test facilities for the rationalization of test procedures
Required Competencies:
Completed technical training in the direction of electronics/measurement technology, technician school, an advantage
Practical experience in handling measuring equipment
Knowledge of radio frequency and power engineering is an advantage
Excellent knowledge of German and English
Positive attitude to work
Reliable team player with a pronounced quality awareness
Enjoy working independently
Benefits:
Competitive salary and benefits package – Up to CHF 110k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 80-110k + Bonus Benefits
Tech Stack: PCB, Testing & Electronics
Applicants for the Test Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/TESARG80110....Read more...
We are looking for a Calibration Technician with hands on laboratory experience in calibration and a UKAS accredited environment. The ideal candidate will have expertise in calibrating a range of instruments, including temperature, dimensional, torque, pressure, frequency, and vibration equipment.
Key Responsibilities
Perform calibration, routine inspection, testing, maintenance, and repair of meters, gauges, instruments, and other measurement equipment in compliance with UKAS standards.
Ensure the calibration and traceability of an externally audited, UKAS-accredited electrical laboratory.
Coordinate externally calibrated equipment, manage maintenance schedules, and oversee budget planning.
Conduct internal calibration of calibrators and standards equipment used within the lab.
Key Skills
Proven experience in laboratory calibration (temperature, torque, pressure, vibration, etc.).
Strong understanding of UKAS accreditation and external auditing.
Experience in equipment maintenance and budget coordination.
Ability to troubleshoot, repair, and optimize lab instruments and measuring equipment.....Read more...
We are looking for a Calibration Technician with hands on laboratory experience in calibration and a UKAS accredited environment. The ideal candidate will have expertise in calibrating a range of instruments, including temperature, dimensional, torque, pressure, frequency, and vibration equipment.
Key Responsibilities
Perform calibration, routine inspection, testing, maintenance, and repair of meters, gauges, instruments, and other measurement equipment in compliance with UKAS standards.
Ensure the calibration and traceability of an externally audited, UKAS-accredited electrical laboratory.
Coordinate externally calibrated equipment, manage maintenance schedules, and oversee budget planning.
Conduct internal calibration of calibrators and standards equipment used within the lab.
Key Skills
Proven experience in laboratory calibration (temperature, torque, pressure, vibration, etc.).
Strong understanding of UKAS accreditation and external auditing.
Experience in equipment maintenance and budget coordination.
Ability to troubleshoot, repair, and optimize lab instruments and measuring equipment.....Read more...
An opportunity has arisen for a Welder Fabricator to join a well-established engineering and manufacturing organisation producing precision-engineered metal products and bespoke enclosures for a range of industrial clients.
As a Welder Fabricator, you will be fabricating and welding high-quality metal components in line with detailed engineering drawings and specifications.
This full-time permanent role offers a competitive salary and benefits.
You will be responsible for:
? Reading and interpreting 2D and 3D engineering drawings accurately.
? Measuring, marking, cutting, and bending materials to required dimensions.
? Assembling and welding fabricated parts to produce finished products.
? Grinding, finishing, and inspecting completed work to ensure it meets quality standards.
? Conducting quality checks and completing relevant documentation.
? Adhering to all health and safety procedures within the workshop.
What we are looking for
? Previously worked as a Fabricator Welder, Welder Fabricator, MIG Welder, TIG Welder, Sheet Metal Fabricator, Metal Fabricator, Welder, Fabricator, Welding Technician, Fabrication Technician or in a similar role
? Have at least 3 years of fabrication experience
? Proven experience working as a metal fabricator or welder within an engineering or manufacturing environment.
? Prior experience in MIG welding, ideally have experience in both TIG and MIG.
? Skilled in working with mild steel, galvanised, and Zintec sheet materials.
? Ability to read and interpret technical drawings (2D & 3D).
? Strong practical understanding of fabrication tools and processes.
? Good mathematical ability and attention to detail.
? Comfortable handling and moving heavy metal components.
Shift:
? Monday to Thursday: 7am to 4pm
? Friday: From 7am to 1pm
? Working hours: 40 per week
What's on offer
? Competitive salary
? Overtime opportunities.
? 31 days' holiday (including bank holidays), with additional en....Read more...
An opportunity has arisen for a Fabricator Welder to join a well-established engineering and manufacturing organisation producing precision-engineered metal products and bespoke enclosures for a range of industrial clients.
As a Fabricator Welder, you will be fabricating and welding high-quality metal components in line with detailed engineering drawings and specifications.
This full-time permanent role offers a competitive salary and benefits.
You will be responsible for:
? Reading and interpreting 2D and 3D engineering drawings accurately.
? Measuring, marking, cutting, and bending materials to required dimensions.
? Assembling and welding fabricated parts to produce finished products.
? Grinding, finishing, and inspecting completed work to ensure it meets quality standards.
? Conducting quality checks and completing relevant documentation.
? Adhering to all health and safety procedures within the workshop.
What we are looking for
? Previously worked as a Fabricator Welder, Welder Fabricator, MIG Welder, TIG Welder, Sheet Metal Fabricator, Metal Fabricator, Welder, Fabricator, Welding Technician, Fabrication Technician or in a similar role
? Have at least 3 years of fabrication experience
? Proven experience working as a metal fabricator or welder within an engineering or manufacturing environment.
? Prior experience in MIG welding, ideally have experience in both TIG and MIG.
? Skilled in working with mild steel, galvanised, and Zintec sheet materials.
? Ability to read and interpret technical drawings (2D & 3D).
? Strong practical understanding of fabrication tools and processes.
? Good mathematical ability and attention to detail.
? Comfortable handling and moving heavy metal components.
Shift:
? Monday to Thursday: 7am to 4pm
? Friday: From 7am to 1pm
? Working hours: 40 per week
What's on offer
? Competitive salary
? Overtime opportunities.
? 31 days' holiday (including bank holidays), with additional en....Read more...
An opportunity has arisen for aFabricator to join a well-established engineering and manufacturing organisation producing precision-engineered metal products and bespoke enclosures for a range of industrial clients.
As a Fabricator, you will be fabricating and welding high-quality metal components in line with detailed engineering drawings and specifications.
This full-time permanent role offers a competitive salary and benefits.
You will be responsible for:
? Reading and interpreting 2D and 3D engineering drawings accurately.
? Measuring, marking, cutting, and bending materials to required dimensions.
? Assembling and welding fabricated parts to produce finished products.
? Grinding, finishing, and inspecting completed work to ensure it meets quality standards.
? Conducting quality checks and completing relevant documentation.
? Adhering to all health and safety procedures within the workshop.
What we are looking for
? Previously worked as a Fabricator Welder, Welder Fabricator, MIG Welder, TIG Welder, Sheet Metal Fabricator, Metal Fabricator, Welder, Fabricator, Welding Technician, Fabrication Technician or in a similar role
? Have at least 3 years of fabrication experience
? Proven experience working as a metal fabricator or welder within an engineering or manufacturing environment.
? Prior experience in MIG welding, ideally have experience in both TIG and MIG.
? Skilled in working with mild steel, galvanised, and Zintec sheet materials.
? Ability to read and interpret technical drawings (2D & 3D).
? Strong practical understanding of fabrication tools and processes.
? Good mathematical ability and attention to detail.
? Comfortable handling and moving heavy metal components.
Shift:
? Monday to Thursday: 7am to 4pm
? Friday: From 7am to 1pm
? Working hours: 40 per week
What's on offer
? Competitive salary
? Overtime opportunities.
? 31 days' holiday (including bank holidays), with additional entitlement for l....Read more...
An opportunity has arisen for aMIG Welder to join a well-established engineering and manufacturing organisation producing precision-engineered metal products and bespoke enclosures for a range of industrial clients.
As a MIG Welder, you will be fabricating and welding high-quality metal components in line with detailed engineering drawings and specifications.
This full-time permanent role offers a competitive salary and benefits.
You will be responsible for:
? Reading and interpreting 2D and 3D engineering drawings accurately.
? Measuring, marking, cutting, and bending materials to required dimensions.
? Assembling and welding fabricated parts to produce finished products.
? Grinding, finishing, and inspecting completed work to ensure it meets quality standards.
? Conducting quality checks and completing relevant documentation.
? Adhering to all health and safety procedures within the workshop.
What we are looking for
? Previously worked as a Fabricator Welder, Welder Fabricator, MIG Welder, TIG Welder, Sheet Metal Fabricator, Metal Fabricator, Welder, Fabricator, Welding Technician, Fabrication Technician or in a similar role
? Have at least 3 years of fabrication experience
? Proven experience working as a metal fabricator or welder within an engineering or manufacturing environment.
? Prior experience in MIG welding, ideally have experience in both TIG and MIG.
? Skilled in working with mild steel, galvanised, and Zintec sheet materials.
? Ability to read and interpret technical drawings (2D & 3D).
? Strong practical understanding of fabrication tools and processes.
? Good mathematical ability and attention to detail.
? Comfortable handling and moving heavy metal components.
Shift:
? Monday to Thursday: 7am to 4pm
? Friday: From 7am to 1pm
? Working hours: 40 per week
What's on offer
? Competitive salary
? Overtime opportunities.
? 31 days' holiday (including bank holidays), with additional entitlement for l....Read more...
Creating 3D models & 2D drawings using Autodesk advanced steel
Converting models for use in revit to meet BIM requirements
Undertake meetings with the design teams & clients
Site measuring/surveying
Training:
2 ½ Year Apprenticeship Programme
Design Technician, Knowledge, skills & Behaviours - delivered in the workplace
Level 3 BTEC in Construction and the Built Environment - Day Release or Remote Delivery (Optional qualification)
Specialist Training Programme Blocks of your choice
End Point Assessment - Knowledge Test, Practical Test and Presentation/Interview Specialist training in structural steel modelling (Tekla Structures and BIM processes)
Training Outcome:After completing the apprenticeship, apprentices can progress into Senior Draughting or Design Technician roles, taking on more complex design responsibilities. With further experience, there are also opportunities to move into BIM coordination or management, overseeing digital design processes and project delivery.Employer Description:D Wilson Architectural Metalwork Ltd are specialist fabricators of architectural metalwork, producing bespoke staircases, balustrades, and other structural features. They’re well known in the industry for their craftsmanship and the quality of their work, especially when it comes to feature staircases. The team take pride in combining technical skill with creativity to deliver projects that stand out, and they’ve built a strong reputation for reliability and attention to detail across everything they do.Working Hours :Monday - Thursday, 8am - 4.30pm (30-minute lunch at 1pm)
Friday, 7am - 3pm (working lunch)Skills: Communication skills,IT skills,Team working,Initiative....Read more...
A rotation plan will start once you have completed your manufacturing key skills training, where you will gain experience & knowledge in different manufacturing departments every 3 months. After the rotation plan you will have travelled around various different departments on the shop floor including assembly & integration, test, repairs and fault finding.
Over this time you will have learnt many different skills in Mechanical and Electrical criteria’s within accordance with IPC 610 (Acceptability of Electronic Assemblies) / 620 (Requirements and Acceptance for Cable and Wire Harness Assemblies).
You will become a key member of the team, with technical knowledge and practical expertise in the use of both common and specialist tools and equipment, including the use of a variety of measuring, testing, diagnostic aids/equipment and processes to ensure individual components, assemblies and/or integrated systems meet the required specification.Training:
As an Assembly Apprentice you will be working towards a Level 3 apprenticeship following the Engineering Maintenance Technician standard
For the duration of this 3 year programme, you will be given one day per week in which to complete your studies with a local college
For the other 4 days, you will be working in the business, applying your learning and gaining a breadth of experience across the industry
Training Outcome:
Will qualify with a Maintenance and Operations Engineering Technician (MOET) standard and be a permanent Assembly Technician within the Thales business
Employer Description:Together, we create the ingenious technological systems and innovations that impact and improve people's lives every single day. Even if you haven't heard the name Thales before, you've definitely benefited from our inventiveness. We reinvest 20% of our sales in Research & Development in the UK. We support businesses, organisations, and governments in addressing tomorrow’s major challenges by developing advanced Defence, Security, Cybersecurity, Digital Identity, and Aerospace solutions, in the most sustainable, responsible, and ethical manner.Working Hours :Monday- Friday, 37 hours a week Monday- Thursday- 8 hours
Friday- 5 hours
Shifts to be confirmedSkills: Communication skills,Attention to detail,Problem solving skills,Analytical skills,Team working....Read more...
Key Responsibilities:
🛠️ Work Order & Documentation Management
Update and manage work orders in line with production and engineering changes
Assist in processing Engineering Change Notes (ECNs) and maintaining accurate records
Check and verify documentation for accuracy and compliance
🔍 Quality Inspection & Reporting
Conduct in-process (intermediate) and final inspections on machined or assembled parts
Support the preparation and completion of inspection reports
Assist in performing dimensional checks and collecting sample production data
Trace and verify parts using part/serial number tracking systems
📑 Quality Auditing & PPAP Support
Complete checklists and audit documents for quality assurance.Learn and assist in the creation of PPAP (Production Part Approval Process) submissions
Create and interpret balloon drawings to support inspection and PPAP requirements
🔧 Testing & Technical Learning
Learn how to test data and parts using basic measuring equipment
Support the Quality and Engineering team in identifying root causes of failures or defects
🌿 Health, Safety & Environmental Awareness
Follow company policies related to Health, Safety, and Environmental (HSE) standards
Participate in safety briefings and contribute to maintaining a clean and safe working environment
Skills You Will Develop:
Understanding of manufacturing and engineering processes
Reading and interpreting technical drawings
Quality inspection techniques and use of measuring instruments (e.g., callipers, micrometres)
Communication and teamwork within a fast-paced engineering environment
Documentation control and traceability in compliance with ISO or similar standards
Requirements:
Interest in engineering, manufacturing, or quality assurance
Good attention to detail and willingness to learn
Basic computer skills (MS Excel, Word)
Strong communication and organizational abilities
Training & Support:
On-the-job training with experienced technicians and engineers
Opportunities to learn industry software and quality systems
Mentorship and regular performance reviews
Support with college assignments or NVQ-related tasks (if applicable)
Career Path:
Successful completion of the apprenticeship could lead to permanent roles such as:
Quality Technician
Production Engineering Support
Inspector / Auditor
Advanced Apprenticeship or further technical training
Training:
Employer: PK Engineering
College: MET Centre, Sandwell College, 404 High Street, West Bromwich, B70 9LB
Apprenticeship Level: Level 3 Engineering and Manufacturing Support Technician
Training Schedule: 4-days per week: On-the-job training at PK Engineering- One day per week at MET Centre
Training Outcome:
For the right candidate to progress as a full-time employee
Employer Description:PK Engineering (WB) Ltd is a family run business established in the early 80s. We are specialists in CNC production work with over 30 years engineering experience. This has allowed us to recognise our customers’ requirements and to become an efficient and innovative organisation that thrives on professionalism and quality.
Our strength lies in our ability to organise our assets, both physical and human, for maximum productivity ensuring our products and services are delivered to the highest standards.Working Hours :Hours:
Monday- Thursday
8am- 5pm
Friday
7.30am- 1.30pm or 8am- 2pm
(30 min lunch per day)
Annual leave- 20 days plus bank holidaysSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
General duties including:
Assisting estimators and project managers with preparing budgets and cost plans for trenchless and tunnelling works
Gathering supplier and subcontractor quotations and building tender comparisons
Measuring drawings and quantities to support bid submissions
Maintaining databases of material, plant, and labour costs
Assisting in financial tracking and reporting on live projects
Helping to prepare client quotations, progress valuations, and cost summaries
Learning about commercial risk, procurement, and cost control in specialist civil engineering
Training:
Training will be at Doncaster College where you will access a wide range of facilities on offer
Day release
You will undertake the Construction Quantity Surveying Technician Level 4 Apprenticeship Standard
You will undertake Functional Skills for English and/or maths if needed
https://www.instituteforapprenticeships.org/apprenticeship-standards/construction-quantity-surveying-technician-v1-1 Training Outcome:
On completion, you could progress into a Junior Estimator, Assistant Quantity Surveyor, or Commercial Coordinator role within HB Tunnelling
With further experience and higher-level study, there is potential to advance toward more senior positions in the tunnelling and civil-engineering sector
The company supports continued professional development and accreditation through the Chartered Institute of Civil Engineering Surveyors (CICES) or RICS
Employer Description:HB Tunnelling Limited is a specialist civil engineering contractor delivering trenchless and tunnelling solutions across the UK. We work on major infrastructure projects for leading utilities and construction clients, using innovative techniques such as microtunnelling, auger boring, pipe jacking, and shaft construction. Our teams are passionate about safety, quality, and developing the next generation of tunnelling professionals through hands-on training and career progression.Working Hours :Monday - Friday, 07:30 - 17:00 with 2 x 30 minute breaksSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Field Sales Representative
Cambridge
£34’000 - £43’000 + Bonuses + Commission ( OTE £48’000+)+ Remote Working + Technical Training + Private Healthcare + Holidays + Progression + Industry Leading Pension + Car / Van Option + Company Credit Card + ‘Immediate Start’
Break into a Field Sales Representative role for an industry leader working a solution selling role! Receive specialist training to constantly improve technically & Earn a terrific package where you can earn in excess of £48’000 through commission and bonuses.
This company is industry leaders within the measuring and analysis field and due to growth they need a Field Sales Representative to join their highly skilled team.You’ll get to progress technically and into senior positions, enjoy earning a fantastic package while selling the best equipment there is, and being constantly challenged. This role is best suited for a candidate with a background in Science / Chemistry looking to break into a Sales role.You Role As A Field Sales Representative Will Include: * Field Sales Representative Role * Solution Selling To A Range Of Different Customers Including Pharma * Remote Role - Covering Cambridge As A Field Sales Representative You Will Have: * Clean Driving Licence * A Higher Certificate / Qualification In Chemistry * Worked Within The Lab / Medical Industry * Experience - Science / Chemistry backgroundPlease Apply Or Call Charlie Auburn on 0203 813 7949Keywords: Sales Engineer, Technical Sales Engineer, Field Sales Representative, Sales Executive, Sales, Chemist, Analytical Equipment, Weighing Equipment, Science, Chemistry, Technician, Medical, Scales, Cambridge,Peterborough, ....Read more...
Field Sales Representative
Manchester
£31’000 - £40’000 + Bonuses + Commission ( OTE £48’000+)+ Remote Working + Technical Training + Private Healthcare + Holidays + Progression + Industry Leading Pension + Car / Van Option + Company Credit Card + ‘Immediate Start’
Break into a Field Sales Representative role for an industry leader working a solution selling role! Receive specialist training to constantly improve technically & Earn a terrific package where you can earn in excess of £48’000 through commission and bonuses.
This company is industry leaders within the measuring and analysis field and due to growth they need a Field Sales Representative to join their highly skilled team.You’ll get to progress technically and into senior positions, enjoy earning a fantastic package while selling the best equipment there is, and being constantly challenged. This role is best suited for a candidate with a background in Science / Chemistry looking to break into a Sales role.You Role As A Field Sales Representative Will Include: * Field Sales Representative Role * Solution Selling To A Range Of Different Customers Including Pharma * Remote Role - Covering Manchester & Surrounding AreasAs A Field Sales Representative You Will Have:
* Clean Driving Licence * A Higher Certificate / Qualification In Chemistry * Worked Within The Lab / Medical Industry * Experience - Science / Chemistry backgroundPlease Apply Or Call Charlie Auburn on 0203 813 7949Keywords: Sales Engineer, Technical Sales Engineer, Field Sales Representative, Sales Executive, Sales, Chemist, Analytical Equipment, Weighing Equipment, Science, Chemistry, Technician, Medical, Scales, Manchester, Oldham,Salford, ....Read more...
Materials, fabrication, tools and measuring devices used in the automotive environment
Inspection of heavy vehicles
Diagnosing and rectifying chassis units including pneumatic braking systems and components
Diagnosing and rectifying vehicle engine and component faults, vehicle transmission and component faults and vehicle electrical system faults
Isolating and re-energising high voltage systems on an electric vehicle
Ensuring your own actions reduce risks to health and safety
Contributing to workplace good housekeeping
Training:As well as attending the training centre for week block release of training, regular assessment and reviews will be undertaken within the apprentice's own workplace which aims to ensure they have the required skills to successfully complete their apprenticeship.
Level 3 Heavy vehicle service and maintenance technician apprenticeship, including Functional Skills if required.Training Outcome:Possibility of full time employmentEmployer Description:Our extensive network of sites enables us to provide a comprehensive food and drink supply chain management service covering the whole of the UK and Ireland. Operating from 100+ locations, we deliver cost-effective state-of-the-art warehousing solutions, GPS shipment tracking, and over 25 years of experience to our customers.Working Hours :Monday to Friday hours to be discussed at interviewSkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Creative,Non judgemental,Patience,Physical fitness....Read more...
An opportunity has arisen for a Welder Fabricator to join a well-established engineering and manufacturing organisation producing precision-engineered metal products and bespoke enclosures for a range of industrial clients.
As a Welder Fabricator, you will be fabricating and welding high-quality metal components in line with detailed engineering drawings and specifications.
This full-time permanent role offers a competitive salary and benefits.
You will be responsible for:
* Reading and interpreting 2D and 3D engineering drawings accurately.
* Measuring, marking, cutting, and bending materials to required dimensions.
* Assembling and welding fabricated parts to produce finished products.
* Grinding, finishing, and inspecting completed work to ensure it meets quality standards.
* Conducting quality checks and completing relevant documentation.
* Adhering to all health and safety procedures within the workshop.
What we are looking for
* Previously worked as a Fabricator Welder, Welder Fabricator, MIG Welder, TIG Welder, Sheet Metal Fabricator, Metal Fabricator, Welder, Fabricator, Welding Technician, Fabrication Technician or in a similar role
* Have at least 3 years of fabrication experience
* Proven experience working as a metal fabricator or welder within an engineering or manufacturing environment.
* Prior experience in MIG welding, ideally have experience in both TIG and MIG.
* Skilled in working with mild steel, galvanised, and Zintec sheet materials.
* Ability to read and interpret technical drawings (2D & 3D).
* Strong practical understanding of fabrication tools and processes.
* Good mathematical ability and attention to detail.
* Comfortable handling and moving heavy metal components.
Shift:
* Monday to Thursday: 7am to 4pm
* Friday: From 7am to 1pm
* Working hours: 40 per week
What's on offer
* Competitive salary
* Overtime opportunities.
* 31 days' holiday (including bank holidays), with additional entitlement for long service.
* Christmas shutdown and early finish every Friday.
* Free on-site parking and health check-ups.
* Death-in-service cover.
* Salary sacrifice scheme
* Access to 24/7 online GP services for you and your family.
* Additional staff incentives including vouchers and company benefits.
This is a fantastic opportunity to join a respected engineering business offering long-term stability, development, and excellent working conditions.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources are an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An opportunity has arisen for a Fabricator Welder to join a well-established engineering and manufacturing organisation producing precision-engineered metal products and bespoke enclosures for a range of industrial clients.
As a Fabricator Welder, you will be fabricating and welding high-quality metal components in line with detailed engineering drawings and specifications.
This full-time permanent role offers a competitive salary and benefits.
You will be responsible for:
* Reading and interpreting 2D and 3D engineering drawings accurately.
* Measuring, marking, cutting, and bending materials to required dimensions.
* Assembling and welding fabricated parts to produce finished products.
* Grinding, finishing, and inspecting completed work to ensure it meets quality standards.
* Conducting quality checks and completing relevant documentation.
* Adhering to all health and safety procedures within the workshop.
What we are looking for
* Previously worked as a Fabricator Welder, Welder Fabricator, MIG Welder, TIG Welder, Sheet Metal Fabricator, Metal Fabricator, Welder, Fabricator, Welding Technician, Fabrication Technician or in a similar role
* Have at least 3 years of fabrication experience
* Proven experience working as a metal fabricator or welder within an engineering or manufacturing environment.
* Prior experience in MIG welding, ideally have experience in both TIG and MIG.
* Skilled in working with mild steel, galvanised, and Zintec sheet materials.
* Ability to read and interpret technical drawings (2D & 3D).
* Strong practical understanding of fabrication tools and processes.
* Good mathematical ability and attention to detail.
* Comfortable handling and moving heavy metal components.
Shift:
* Monday to Thursday: 7am to 4pm
* Friday: From 7am to 1pm
* Working hours: 40 per week
What's on offer
* Competitive salary
* Overtime opportunities.
* 31 days' holiday (including bank holidays), with additional entitlement for long service.
* Christmas shutdown and early finish every Friday.
* Free on-site parking and health check-ups.
* Death-in-service cover.
* Salary sacrifice scheme
* Access to 24/7 online GP services for you and your family.
* Additional staff incentives including vouchers and company benefits.
This is a fantastic opportunity to join a respected engineering business offering long-term stability, development, and excellent working conditions.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources are an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An opportunity has arisen for aFabricator to join a well-established engineering and manufacturing organisation producing precision-engineered metal products and bespoke enclosures for a range of industrial clients.
As a Fabricator, you will be fabricating and welding high-quality metal components in line with detailed engineering drawings and specifications.
This full-time permanent role offers a competitive salary and benefits.
You will be responsible for:
* Reading and interpreting 2D and 3D engineering drawings accurately.
* Measuring, marking, cutting, and bending materials to required dimensions.
* Assembling and welding fabricated parts to produce finished products.
* Grinding, finishing, and inspecting completed work to ensure it meets quality standards.
* Conducting quality checks and completing relevant documentation.
* Adhering to all health and safety procedures within the workshop.
What we are looking for
* Previously worked as a Fabricator Welder, Welder Fabricator, MIG Welder, TIG Welder, Sheet Metal Fabricator, Metal Fabricator, Welder, Fabricator, Welding Technician, Fabrication Technician or in a similar role
* Have at least 3 years of fabrication experience
* Proven experience working as a metal fabricator or welder within an engineering or manufacturing environment.
* Prior experience in MIG welding, ideally have experience in both TIG and MIG.
* Skilled in working with mild steel, galvanised, and Zintec sheet materials.
* Ability to read and interpret technical drawings (2D & 3D).
* Strong practical understanding of fabrication tools and processes.
* Good mathematical ability and attention to detail.
* Comfortable handling and moving heavy metal components.
Shift:
* Monday to Thursday: 7am to 4pm
* Friday: From 7am to 1pm
* Working hours: 40 per week
What's on offer
* Competitive salary
* Overtime opportunities.
* 31 days' holiday (including bank holidays), with additional entitlement for long service.
* Christmas shutdown and early finish every Friday.
* Free on-site parking and health check-ups.
* Death-in-service cover.
* Salary sacrifice scheme
* Access to 24/7 online GP services for you and your family.
* Additional staff incentives including vouchers and company benefits.
This is a fantastic opportunity to join a respected engineering business offering long-term stability, development, and excellent working conditions.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources are an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An opportunity has arisen for aMIG Welder to join a well-established engineering and manufacturing organisation producing precision-engineered metal products and bespoke enclosures for a range of industrial clients.
As a MIG Welder, you will be fabricating and welding high-quality metal components in line with detailed engineering drawings and specifications.
This full-time permanent role offers a competitive salary and benefits.
You will be responsible for:
* Reading and interpreting 2D and 3D engineering drawings accurately.
* Measuring, marking, cutting, and bending materials to required dimensions.
* Assembling and welding fabricated parts to produce finished products.
* Grinding, finishing, and inspecting completed work to ensure it meets quality standards.
* Conducting quality checks and completing relevant documentation.
* Adhering to all health and safety procedures within the workshop.
What we are looking for
* Previously worked as a Fabricator Welder, Welder Fabricator, MIG Welder, TIG Welder, Sheet Metal Fabricator, Metal Fabricator, Welder, Fabricator, Welding Technician, Fabrication Technician or in a similar role
* Have at least 3 years of fabrication experience
* Proven experience working as a metal fabricator or welder within an engineering or manufacturing environment.
* Prior experience in MIG welding, ideally have experience in both TIG and MIG.
* Skilled in working with mild steel, galvanised, and Zintec sheet materials.
* Ability to read and interpret technical drawings (2D & 3D).
* Strong practical understanding of fabrication tools and processes.
* Good mathematical ability and attention to detail.
* Comfortable handling and moving heavy metal components.
Shift:
* Monday to Thursday: 7am to 4pm
* Friday: From 7am to 1pm
* Working hours: 40 per week
What's on offer
* Competitive salary
* Overtime opportunities.
* 31 days' holiday (including bank holidays), with additional entitlement for long service.
* Christmas shutdown and early finish every Friday.
* Free on-site parking and health check-ups.
* Death-in-service cover.
* Salary sacrifice scheme
* Access to 24/7 online GP services for you and your family.
* Additional staff incentives including vouchers and company benefits.
This is a fantastic opportunity to join a respected engineering business offering long-term stability, development, and excellent working conditions.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources are an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Daily/Weekly tasks:
To learn to interpret and produce engineering drawings to standard layouts and specifications
To program and operate CNC Machinery such as Machining centres, EDM wire eroders and spark eroders
To safely and competently use various manual machinery such as centre lathes, milling machines and surface grinders
Assist in the manufacture of new Extrusion tooling
Service of extrusion tool parts, including dies, calibrators, and tank plates
To correctly use various types of measuring equipment, such as micrometres, slip gauges, and comparators to inspect completed work and ensure compliance to various tolerances and quality standards
Support production areas in technical assessment of tooling issues
Preventive maintenance of tooling
Correct use of all hand tools
Tooling improvements
To assist where required with tooling start-ups and trials
Training:
This is a Level 3 Engineering Technician Apprenticeship, delivered over a 37 month period
The apprentice will attend the training centre, In-Comm Training Services in Telford, TF3 3AJ, 2 and a half days per week for the first 14 months
Training Outcome:
Full-time opportunity to progress and move within departments
Continuation and progression to move on to HNC Level 4
Further training and development within the business
Employer Description:Founded in 1976, the Epwin Group has changed significantly from its origins as one of the first PVC-U window fabrication businesses in the UK. In July 2014, the Epwin Group was listed on the London Stock Exchange AIM market starting a new era in its history.
The Group has grown both organically and by acquisition to become the leading manufacturer of energy efficient and low maintenance building products for the Repair, Maintenance and Improvement, social housing and new build markets in the UK.
The Group serves the trade, retail, new build and social housing sectors through a nationwide network of merchants, plastics stockists, window, door and conservatory manufacturers and installers.
Our products are designed and manufactured in-house to suit the needs of our end-user markets and are sold under established and trusted brands. We have a wide product range to cater for all requirements and are constantly investing and innovating in new processes, products and services.Working Hours :Monday - Friday, 8.30am - 5.00pmSkills: Communication skills,Attention to detail,Number skills,Team working,Clean and tidy approach,Punctual and adaptable,Work on own initiative,Positive approach,Work driven....Read more...
The Apprentice Mechanical Workshop Operative is responsible for manufacturing equipment for our chemical dosing and bespoke system solutions. This includes manufacturing pumps, booster sets, hoses, reels, and any other relevant equipment. The apprentice will receive the support to become fully qualified in their field.
Roles & Responsibilities:
· Undertake repair, maintenance, manufacturing, test and installation tasks as requested.
· Manufacture items as drawn to ensure commercial accuracy and maintain efficiency.
· Diagnose errors or technical problems and report to team leader.
· Polypropene pipe and sheet welding
· Stainless steel pipework assemblies including pump assemblies
· Grp flooring cutting and forming
· Water pressure testing of pipework
· Welding of pipe brackets, supports and stands
· Use of measuring devises
· Pressure testing
· Undertake other duties linked to your role that benefit the company from time to time on reasonable request of your line manager
Training:
Engineering Technician Level 3
Functional Skills in English and maths if required
1 day per week at Bradford College
4 days per week in the workplace.
Training Outcome:
Potential full time job for the right candidate after training
Employer Description:Since our formation in 1987, Northern Pumps Suppliers, has developed into NPS Engineering Group, we have grown to become an industry leader in; pumps and pumping systems, offsite manufactured systems, dry powder polymer units, chemical dosing systems, project management, backflow prevention systems, glass reinforced polymer (GRP) kiosks – enclosure manufacture includes LPCB rated kiosks, stainless steel, mild steel and structural steel fabrication, floodgates, flood doors and more.
Our extensive range of products and services serve a variety of different industries from pharmaceuticals, food production to water treatment, security and energy production.Working Hours :Monday - Thursday, 7.30am - 4.00pm. Friday, 7.30am - 3.00pm.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Number skills,Team working,Initiative,Non judgemental,Patience,Physical fitness....Read more...
