Are you a Field Service Engineer based in North of England or Scotland looking for an exciting new role?
Operating globally, with a HQ in Surrey, my client develop temperature, pressure and flow instrumentation and measurement equipment for a variety of industries including Oil & Gas, Nuclear, Petro-chemical, Marine applications and Defence.
As a Field Service Engineer, you will be responsible for undertaking the installation, commissioning, servicing, calibration, fault finding and repairing or replacement of components and equipment on all contracts and specialist projects. You will carry out routine maintenance of equipment and systems using specialist test equipment.
For this position, you will be based in Scotland, covering from Carlisle to Glasgow, or based in the North of the UK, covering from South Yorkshire to the Scottish border. Overnight stays will be required.
Key skills and experience required for Field Service Engineer:
Proven experience within Service Engineering role as well as worked within factory environment
Relevant industry experience in a highly pressurised, intrinsically safe, hazardous environment i.E. Instrumentation, process control, automation, oil & gas, petro-chemical, nuclear etc.
Strong Electrical and Mechanical experience
Plant maintenance/fault finding experience
Ideally qualified in a Mechanical or Electrical discipline
Currently holds or able to obtain SC clearance.
This is a very exciting job opportunity, working across different sectors and visiting a wide range of customers across the North of the UK or Scotland.
To apply for Field Service Engineer based in the North of England or Scotland, please send your CV to skhuttan@redlinegroup.Com or for a confidential phone call please contact Sophie Khuttan on 01582 450054 quoting SKK1104.....Read more...
GRP Laminators.
Working in a team environment you will work on a range of products, you will need to read and understand lay-up drawings and use your laminating skills to carry out the required workload to the lay-up specification. You will also need to utilise your skills to query any error or change that you may observe on any particular job. You may be required to interchange between Composites and GRP sites due to workloads in the relevant departments.
Duties & Responsibilities of a Laminator
· Laminating and tooling across a broad range of products performing a range of laminating processes which may include wet-lay, infusion, vac-bagging or pre-preg.
· Read and understand lay-up specifications.
· Checking information on drawings is clear.
· Checking route card instructions are correct.
· Following processes and ensuring the highest quality is maintained at all times
· Use of hand tools.
· Use of a wide range of fabrics, CSM and cloths in dry and pre-preg formats.
· Identify laminating defects.
· Record daily time spent on jobs on weekly timesheet.
· Correct use of PPE.
· Work with QA team to ensure that parts are being manufactured effectively and according to drawings and lay up books to ISO standards.
· Help develop processes to improve quality and efficiency.
Key Skills & Qualifications:
· 2+ years experience gained within the Marine, Aerospace or other quality driven industry.
· Familiar with pre-preg autoclave processes and materials such as carbon and glass.
· Excellent attention to detail and accuracy levels.
· Ability to follow procedures and work instructions / manuals.
· Good verbal communication and listening skills.
· Used to working in a fast-moving environment.
· Ability to read engineering drawings would be an advantage.
If this sounds like the role for you please apply or call Ian at Holt Engineering on 07734406996....Read more...
Our Client, a leading law firm based in the heart of Newcastle, are recruiting for a Shipping Solicitor to join their team. The role would suit experienced commercial litigators, who can demonstrate a minimum of 2 years’ post qualifying experience within a commercial litigation environment.
Responsibilities:
Working on behalf of P&I clubs, ship owners, charterers, sellers, buyers and off shore energy companies amongst others.
Handling a caseload of shipping matters to include freight, laytime and demurrage, charterparty and bill of lading issues, bunker clauses, shipbuilding, ship sale and purchase and marine personal injury.
Dealing with all aspects of litigation and arbitration.
Reviewing and drafting of various documents and contracts to include time and voyage charters, crew management agreements, licenses, service agreements, shipbuilding agreements and mooring licenses.
Providing expert legal advice.
Business development and networking.
What’s on offer:
Competitive salary, dependent on experience
International travel opportunities.
Secondment opportunities.
Healthcare.
Hybrid working.
Training and support.
Genuine career progression opportunities.
Excellent quality of work.
Requirements:
2 years’ plus PQE gained within commercial litigation from a reputable firm.
Excellent academics and a passion for shipping law.
Based in or local to Newcastle.
Open to travel nationally and internationally.
To apply for this role, please submit your CV to the consultant via the link or contact Chloe Smith on 0113 467 9783.....Read more...
An exciting opportunity has arisen for a Test Development Engineer - LabVIEW based in Fareham, Hampshire to join a leading manufacturer of complex electronics equipment that is sold into the marine industry all over the world.
As an Test Development Engineer - LabVIEW based in Fareham, you will work in a small team of highly experienced engineers, developing and supporting production test equipment.
You will be responsible for the test equipment from initial specification, through the design, build and installation phases, working closely with all the project disciplines.
Responsibilities also include:
Working closely with the Industrialisation Test Manager and Design Leads to ensure that the test strategy sufficiently exercise products to capture potential manufacturing defects across the complete product working parameters.
Working closely with the industrialisation team, design and produce test equipment that correctly delivers the manufacturing test strategy and is reliable, robust and cost effective.
Developing, producing, and supplying all associated documentation, schedules and training for the test solutions.
Installing the completed test solution into our EMS partners.
The successful Test Development Engineer - LabVIEW based in Fareham will be highly skilled in current versions of National Instruments LabVIEW, preferably qualified to CLD or CLA levels and have significant experience in production test on Radar products.
My client offers superb training and career progression opportunities. If you are looking for a position within a company where you can progress your career while working on some ground-breaking technology, then this is the role for you!
APPLY NOW for the Test Development Engineer - LabVIEW, based in Fareham by emailing your CV to Twilliams@redlinegroup.Com or call Tarah on 01582 878821 if you have any specific questions about this role.....Read more...
Our Client, a leading law firm based in the heart of Newcastle, are recruiting for a newly qualified Solicitor to join their shipping team in the heart of Newcastle. The role would suit a NQ Solicitor who has ideally completed a seat within shipping, though candidates who have gained a seat within the commercial litigation team of a reputable law firm will also be considered.
Responsibilities:
Working on behalf of P&I clubs, ship owners, charterers, sellers, buyers and off shore energy companies amongst others.
Handling a caseload of shipping matters to include freight, laytime and demurrage, charterparty and bill of lading issues, bunker clauses, shipbuilding, ship sale and purchase and marine personal injury.
Dealing with all aspects of litigation and arbitration.
Reviewing and drafting of various documents and contracts to include time and voyage charters, crew management agreements, licenses, service agreements, shipbuilding agreements and mooring licenses.
Providing expert legal advice.
Business development and networking.
What’s on offer:
Competitive salary, dependent on experience
International travel opportunities.
Secondment opportunities.
Healthcare.
Hybrid working.
Training and support.
Genuine career progression opportunities.
Excellent quality of work.
Requirements:
NQ Solicitor who has ideally completed a seat in Shipping, though candidates who have completed a Commercial Litigation seat within a reputable law firm will also be considered.
Excellent academics and a passion for shipping law.
Based in or local to Newcastle.
Open to travel nationally and internationally.
To apply for this role, please submit your CV to the consultant via the link or contact Chloe Smith on 0113 467 9783.....Read more...
34 Holidays, matched pension scheme and private healthcare (BUPA) are just a few of the perks that the Mechanical Technician will enjoy whilst working with this globally operating organisation.
Supplying a number of high profile industries, such as Oil & Gas, Marine and Power Generation, this impressive organisation was established and now employs over 8000 employees in over 30 countries across the world.
Because of continued demand, this employer is actively recruiting a Mechanical Technician to permanently join their Leeds based facility.
This position is purely Workshop based, however, the successful Mechanical Technician will be given the option to occasionally work in the field on customer premises.
Key responsibilities of the Mechanical Technician will include:
Working as part of a team that is responsible for the overhaul, maintenance and repair of heavy rotating equipment & machinery
Stripping/dismantling, inspecting, diagnosing faults and testing a range of rotating machinery including Transmissions
For the Mechanical Technician position, we are keen to receive applications from individuals who possess:
Possess formal qualifications within a relevant discipline (Apprenticeship, NVQ/BTEC/City & Guilds Level 3, HNC, HND etc.)
Previous experience working in an maintenance, assembly or building role, ideally focused on heavy rotating machinery (pumps, transmissions, compressors, turbines, valves, diesel engines etc.)
In return, the Mechanical Technician will receive:
Renumeration: Between £29,396.00 - £34,118.00 per annum + £2,800.00 yearly allowance when working on site/in the field
Holiday Entitlement: 34 per annum (26 free choice + public holidays)
Optional private healthcare (BUPA) and Simply Health scheme
Matched pension contribution
To apply for the Mechanical Technician position, please click “Apply Now” and attach an updated version of your CV. Alternatively, please contact Callum Good at E3 Recruitment for more information.....Read more...
Dentist Jobs in Mackay, Queensland, Australia. Great Barrier Reef, Tropical Rainforests, Private practice, high-end clinic. High specification practice with superb equipment, Visa approved. ZEST Dental Recruitment working in partnership with an established private dental practice is seeking to recruit a General Dentist.
Full-time Dentist
Mackay, Queensland
Great Barrier Reef, Tropical Rainforests
Visa approved
Superb remuneration package, high monthly gross (high salary if visa sponsored)
Relocation allowance
Four weeks accommodation paid
CPD Allowance
Modern clinic with state-of-the-art equipment
Clinical freedom
Superb support and professional development with ongoing access to CPD, courses, and training
Reference: AU4046C
We are looking for a passionate Dentist to join this bustling practice in Mackay. The dental clinic is centrally located allowing great exposure from the main road and just minutes away from a major shopping centre.
From secluded beaches to Australia's longest stretch of subtropical rainforest, Mackay is an exciting place to live and work. This 1920s architectural town will have your itinerary jam-packed with activities, from exploring public artworks by locals to travelling out of Mackay CBD to explore the rainforest and see some of Australia's native animals.
"Mackay is a city in Queensland, on Australia’s east coast. Off the coast is a section of the Great Barrier Reef. Closer to shore are the islands of St. Bees, with reefs, rainforests and koalas, and Keswick, rich in marine life. Mackay itself is known for its Harbour Beach, marina and Bluewater Lagoon, a city water park. Inland from Mackay, Eungella National Park is a habitat for rare frogs and platypus." Candidates will be AHPRA registered or qualified from Australia, UK, Ireland, or Canada, or be registered or qualified in New Zealand or have undertaken the ADC examination to ensure automatic AHPRA registration. For further information regarding this dentist position, confidential enquiries can be made by submitting your CV to ZEST Dental. All applications and enquiries will be treated in the strictest of confidence.....Read more...
Project Test Engineer – Automotive Technologies - Buckingham
My client, a dynamic Automotive Technologies business, are looking to recruit a Project Test Engineer with a strong interest and passion for Automotive Technology development. This is a great opportunity to work for one of the most dynamic smart-tech companies in the UK, with an extensive background of supplying products into the Global Automotive, Motorsport, Marine, Mining and Defence industry Sectors and a portfolio of Blue-Chip clients, including BMW, Pirelli, Porsche, Ferrari, Aston Martin, JCB and Bosch to name just a few.
As Project Test Engineer you will take ownership of testing and sign-off activities of products, by validating functionality, performance, reliability and safety. You will be responsible for creating and maintaining technical documentation, test plans and test tools.
Key Responsibilities:
Take an active role in all aspects of product testing, from R&D to product release.
Develop and utilise software, firmware, and hardware testing tools for product testing tasks.
Write and execute product testing plans and strategies.
Identify and improve product testing tools and processes.
Create and maintain product test sheets and documentation.
Work closely with all our teams to ensure smooth and creative delivery!
Essential Experience Requirements:
Engineering Degree or Equivalent (ideally in Automotive Engineering, Electronic Engineering or Mechanical Engineering)
At least 1 year experience in a similar role, ideally within the Automotive Technology industry sector
Familiarity with hardware testing tools such as oscilloscopes, logic analysers and multimeters
Ability to demonstrate a logical approach to troubleshooting
Full, Clean UK Driving Licence
Desired Experience:
Exposure to GPS and Automotive-based technologies
Understanding of testing methodologies, tools and best practices
Knowledge of coding (Python)
....Read more...
Job Title: Business Development ManagerLocation: Singapore
Who are we recruiting for?Our client, a leading global logistics company based in Singapore, is seeking a dynamic and motivated Business Development Manager to join their team. This company offer leading solutions within logistics and maritime, and are looking for someone to work within their Maritime department.
What will you be doing?
Actively hunting and prospecting for new customers through various platforms and leads
Identifying and pursuing new business opportunities, engaging Ship Owners, Charterers, and Agents.
Conducting telemarketing and visiting potential and existing customers
Arranging local sales campaigns for visiting customers face to face
Preparing, submitting, and following up on quotations promptly
Engaging in customer relationship management activities to improve business relationships and increase sales activities
Conducting market research to understand industry dynamics and competitor dynamics
Are you the ideal candidate?
Ideally a qualification in business or logistics
Minimum 2-5 years of relevant experience in a similar capacity working within the Maritime industry
Proficiency in MS Office and CRM databases
Fluent English communication skills, both oral and written
Knowledge in marine logistics
What’s in it for you?
Opportunities for professional growth and development
Competitive remuneration package
Positive and vibrant company culture
Chance to contribute to a more sustainable world through the company's commitment to renewable energy solutions
Collaboration with a dedicated team focused on success
Who are we?Executive Integrity is a global executive search and recruitment consultancy for a more sustainable world with a focus on talent within the Maritime and Renewable Energy sectors. We give a proportion of all our profits to Renewable World, a charity that develops affordable and innovative renewable energy solutions to poverty-stricken communities.....Read more...
An exciting opportunity has arisen for a Senior Embedded Software Engineer - C++ based in Fareham, Hampshire to join a leading manufacturer of complex electronics equipment that is sold into the marine industry all over the world.
You will be joining a well-established R&D team at a company who invest heavily in product development across challenging and diverse projects.
The ideal Senior Embedded Software Engineer - C++ based in Fareham will have experience of designing, coding, integrating, testing and de-bugging embedded software / low-level programming.
The main responsibilities of the Senior Embedded Software Engineer - C++ based in Fareham role will be to:
Develop embedded firmware for our cutting-edge products, ensuring optimal performance, reliability and efficiency.
Design and implement low-level drivers, components and communication protocols for embedded systems in a multi-threaded real-time environment.
Conduct thorough testing and debugging of embedded systems, identifying and resolving software and hardware integration issues.
Work closely with the product development team to define software requirements, specifications, and system architecture.
Work within an agile environment.
These are the essential skills/experience required for the Senior Embedded Software Engineer - C++ based in Fareham role:
Proven experience as a Senior Embedded Software Engineer, with a focus on firmware development and board bring up
Expertise in C/C++ for embedded systems
Experience with real-time operating system (RTOS) and embedded Linux
Proficiency in debugging tools and techniques for embedded systems
Solid understanding of hardware design principles and ability to read schematics
The successful candidate will join a highly technical team of engineers, tasked with creating the next generation of cutting-edge products which will provide significant growth to the organisation.
My client offers superb training and career progression opportunities. If you are looking for a position within a company where you can progress your career while working on some ground-breaking technology, then this is the role for you!
To apply for this Senior Embedded Software Engineer - C++ based in Fareham, please email your CV to Twilliams@redlinegroup.Com or call Tarah on 01582 878821 if you have any specific questions about this role.....Read more...
Job title: Technical Superintendent (duel fuel)
Location: London, UK
Who are we working for?
Executive Integrity are working alongside a renown and market leading shipping company who strive to protect the global and marine environment through fleet-wide implementation of safe operation practices. Our client manage a range of dry and wet vessel types.
Our client are going through a large expansion of Dual Fuel vessels due to be delivered over the next 12-18 months.
What will you be doing?
As a Technical Superintendent you will be working within a dynamic team responsible for the safe and economic operation of a fleet of Dual Fuel vessels.
Duties:
Oversee vessel performance
Responsible for the technical and operational condition of vessels.
Provide subject matter expertise and support to your vessels, crews and colleagues
You will ensure vessels are fully certified according to international maritime legislative requirements, Flag State administrations and Classification Societies
Manage all phases of the dry-docking process from initial planning to completion.
Are you the ideal candidate?
This is an excellent opportunity for a experienced Technical Superintendent and qualified Chief Engineer/2nd Engineer looking to be part of a highly recognised company. Knowledge of LNG dual fuel is essential and need to be competent in technical operations.
Requirements:
Chief Engineer or 2nd Engineer experience on dual fuel vessels
ME-GI Engine experience required
Superintendent experience with dual fuel vessel required
Strong knowledge of LNG duel fuel technical requirements and voyage regulations
Willing to be London based
Very good people management skills
Team work and cooperation
Very good organisational skills
Fluency in English
Who are we?
Executive Integrity is a global executive search and recruitment consultancy for a more sustainable world with a focus on talent within the Green Technology and Renewable Energy sectors. We give a proportion of all our profits to Renewable World, a charity that develops affordable and innovative renewable energy solutions to poverty-stricken communities.
For every placement, we plant a tree with the National Trust Foundation. ....Read more...
JOB DESCRIPTION
PRINCIPLE DUTIES AND RESPONSIBILITIES:
Financial Analysis: Daily/monthly financial analysis and support for the VP Finance and the MRT business. Monthly preparation of MRT financial statements. Review and analysis of financial statements variances by segment, brand, and department. Monitoring of OWC metrics to ensure DOI, DSO and DAP measurement vs. targets. Detailed and on-going sales and margin analysis by segment, brand and sku.
Annual GTO (budget) preparation: Work with VP Finance and business segment leaders to build annual revenue and expense targets for the MRT business. Build budget by business segment and department, manage data loading to OneStream and preparation of ad hoc exhibits, reports and presentations.
Distributor COOP, Rebate and Commission Program Management: Coordinate and partner with segment sales managers and MRT senior executives to manage the distributor programs for Marine segment and NBD for individual distributor and non-direct buy customer buying programs, coop agreements, loyalty growth, rebate programs and commission payments. Assist VP Finance and Segment sales leaders in quarterly/annual calculation of these programs for presentation to both segment sales managers and customers. Ensure proper monthly accruals both COOP and rebate programs.
GSC Process / Control Management: Oversee the MRT interface with GSC activities, A/R and A/P. Ensure on-going business support for internal documentation, execution, and communication of but not limited to, new customer setup, customer credit memo's, new vendor setup, vendor PO's, check disbursements, Concur expense management, etc.
Customer Pricing Management: Coordinate and partner with segment sales managers, customer service and MRT senior executives to establish, implement, communicate, maintain, and document customer pricing & discount structures.
Organization Support: Interface professionally with ICG/MRT senior executives and team members, exercising strong judgement and ability to prioritize activities based on departmental objectives and business needs. Anticipate the manager's and team's needs and take appropriate action to produce desired outcomes with accuracy and efficiency.
QUALIFICATIONS:
Bachelor's degree or equivalent experience in Business, Finance or Accounting. Experience managing multiple priorities. Well organized, meticulous with ability to multi-task under tight timelines. Proficiency with Microsoft Suite (Outlook, Word, Excel). Excellent written and verbal communication skills. Collaborator with a cheerful outlook and confidence. Willingness to adopt new tools and systems in an ever-changing environment. Apply for this ad Online!....Read more...
.
Job title: Offshore Cable Installation Engineer
Location: Italy ( Genova ) or France ( Nantes ) - Remote work available
Who are we recruiting for?
The client is a pioneer in delivering Engineering & Consultancy services for Marine Energy projects, with daily emphasis on technical excellence, fulfilling the needs of their employees and contractors, and offering innovative solutions to our clients has been key to our success.
What will you be doing?
· Drive technical and commercial requirements for contracting cable installation packages and support other packages with interface requirements.
-Manage project envelope and support environmental impact assessment (EIA)
-Contract management of the Cable installation packages, supported by contract managers.-Plan project activities and deliverables to secure successful and timely development/delivery
-Prepare risk assessments and mitigation plans
-Prepare progress reports on finance, risk, safety, and progress for internal stakeholders
-Identify and implement learnings from elsewhere in the portfolio
-Identify opportunities and apply continuous improvement methodology throughout the project
Are you the ideal candidate?
-Engineering degree (BSc or MSc)
-Knowledge of and network in the existing supply chain for offshore installation
-Previous Offshore Cable Installation/HDD/Trenching /cable pulling experience is preferred
-Experience within procurement, contract, and claim management (e.g. FIDIC and BIMCO contracts would be beneficial).
-Demonstrate high safety focus and awareness
-Excellent communicator verbally and in writing
-Ability to work closely with external suppliers and clients.
-Agile, adaptable, and flexible in responding to the changing needs of the organization
-Strong communications/interpersonal skills
-Experienced in MS Office tools
What's in it for you?
Work for a global leading consultancy in the Renewables space
Competitive salary
Flexible hybrid working
Opportunity to work globally
Who are we?
Executive Integrity is a global executive search and recruitment consultancy for a more sustainable world with a focus on talent within the Maritime and Renewable Energy sectors. We give a proportion of all our profits to Renewable World, a charity that develops affordable and innovative renewable energy solutions to poverty-stricken communities.....Read more...
Our client is a leader in specialist joinery and interior fit-out. The Company offers a complete refurbishment / fit-out turnkey service within a broad range of sectors including marine, specialist joinery, luxury residential, commercial, hotels, themed and leisure interiors.
They currently have an exciting opportunity available for a Project Director for one of their brand-new projects based in Mayfair.
The Project Director will be responsible for the delivery of major high-end interior fit-out projects ensuring safety, budget, programme, and quality standards are met.
Role and Responsibilities:
Developing a project plan and ensure the necessary resources are organised to meet the plan. Continually monitor progress and take all necessary steps to ensure the completion date is met.
Developing a project budget and ensure the project is delivered within that budget
Ensure that all work is carried out to the client’s specifications.
Ensure that the project resources i.e. staff, labour, plant, materials and sub-contractors are effectively managed.
Liaise with clients and their agents to advise on progress and problem resolution as required.
Ensure contractual conditions are adhered to and the contractual position is not compromised.
Monitor the financial performance of the project and take all necessary steps to minimise costs.
Proactively develop relationships with clients.
Proactively participate in value engineering to maximise project contribution.
Ensure that a high standard of safety is maintained.
Skills and Requirements:
Extensive project management experience on projects of cica £60M preferably with experience of interior fit-out type projects.
Hotel/Residential experience
Fully competent in H&S. CSCS Black Card is desirable.
Excellent leadership, organisational and communication skills.
Sound commercial acumen and the ability to add value and optimise profits.
Good IT skills with the ability to produce programmes, reports and comply with all record keeping in line with industry standards and Company procedures.
Ability to build and promote successful customer relationships.
Experience working in a pressurised environment and can keep calm under pressure.
Strong influencing, negotiating and presentation skills.
If interested, please get in touch via contact details provided or click “Apply” to forward an up-to-date copy of your CV.
Cavendish (Recruitment) Professionals Ltd are proud to be an equal opportunity employer and we believe that inclusivity begins with the candidate experience. All qualified applicants will receive consideration for employment regardless of, gender, race, age, sexual orientation, religion, or belief.....Read more...
Position: FPGA Engineer
Location: Dublin
Salary: DOE
Our client is a leading manufacturer of high-performance inertial sensors, including tactical grade, Coriolis vibratory gyroscopes and navigation grade, quartz servo accelerometers. Innalabs offer solutions for the aerospace, subsea, marine, space, energy, industrial, civil engineering, and transportation markets.
Job Description:
Our client is seeking a FPGA Engineer to join their team.
They are seeking a highly motivated FPGA engineer to join their FPGA Team, with previous experience of architecting, designing and successfully delivering FPGA based systems.
Responsibilities:
• Specification/design FPGA blocks
• Design documentation including FPGA requirements, specifications, design descriptions, and test specifications.
• FPGA laboratory-based verification work, system integration and test.
• Support existing FPGA design verification and board test activities
• Collaborate with a multidisciplinary team on system architecture and design, providing inputs to architecture and design reviews.
• Write, simulate, and verify VHDL based FPGA designs.
• Schematic, PCB Layout support, and review.
• Proficient with scripting languages such as Python, and programming languages such as C/C++ for purposes of simulation/design environment development and laboratory test results analysis.
Requirements:
• Bachelor’s and/or Master’s degree in Electronic Engineering
• Strong knowledge of FPGA design flow : Verification, Synthesis, Partitioning, Place & Route, Timing Closure and Power Estimation
• Knowledge of interface protocols, memory technologies and communication interfaces (UART, SPI, I2C).
• Familiarity of electronic circuit & system design: analog, digital and power.
• Knowledge of embedded systems and processor architectures
• Experienced in the use of laboratory equipment such as Oscilloscope, Signal Generator, Signal Analyser.
• Experience with tools such as SVN & Git
• Preferred experience with VHDL and ECSS-Q-ST-60-02 – ASIC & FPGA Development design flow for space projects.
• Good communication and problem-solving skills.
• Team player
• Hardware/System debug skills
• Very proficient reading and writing in English, other languages preferable
Due to the urgency of this vacancy, it is not possible for our client at this time to consider anyone without the appropriate work permits, visa or sponsorship's already in place. Therefore, we are unable to consider candidates who do not have full authorisation to work in Ireland.
Applications submitted without the necessary visa in place will not be considered.
If the position above is of interest to you and you would like to know more, please call Arlene today on 0860651940 in complete confidence.
AC
....Read more...
Position: FPGA Engineer
Location: Dublin
Salary: DOE
Our client is a leading manufacturer of high-performance inertial sensors, including tactical grade, Coriolis vibratory gyroscopes and navigation grade, quartz servo accelerometers. Innalabs offer solutions for the aerospace, subsea, marine, space, energy, industrial, civil engineering, and transportation markets.
Job Description:
Our client is seeking a FPGA Engineer to join their team.
They are seeking a highly motivated FPGA engineer to join their FPGA Team, with previous experience of architecting, designing and successfully delivering FPGA based systems.
Responsibilities:
• Specification/design FPGA blocks
• Design documentation including FPGA requirements, specifications, design descriptions, and test specifications.
• FPGA laboratory-based verification work, system integration and test.
• Support existing FPGA design verification and board test activities
• Collaborate with a multidisciplinary team on system architecture and design, providing inputs to architecture and design reviews.
• Write, simulate, and verify VHDL based FPGA designs.
• Schematic, PCB Layout support, and review.
• Proficient with scripting languages such as Python, and programming languages such as C/C++ for purposes of simulation/design environment development and laboratory test results analysis.
Requirements:
• Bachelor’s and/or Master’s degree in Electronic Engineering
• Strong knowledge of FPGA design flow : Verification, Synthesis, Partitioning, Place & Route, Timing Closure and Power Estimation
• Knowledge of interface protocols, memory technologies and communication interfaces (UART, SPI, I2C).
• Familiarity of electronic circuit & system design: analog, digital and power.
• Knowledge of embedded systems and processor architectures
• Experienced in the use of laboratory equipment such as Oscilloscope, Signal Generator, Signal Analyser.
• Experience with tools such as SVN & Git
• Preferred experience with VHDL and ECSS-Q-ST-60-02 – ASIC & FPGA Development design flow for space projects.
• Good communication and problem-solving skills.
• Team player
• Hardware/System debug skills
• Very proficient reading and writing in English, other languages preferable
Due to the urgency of this vacancy, it is not possible for our client at this time to consider anyone without the appropriate work permits, visa or sponsorship's already in place. Therefore, we are unable to consider candidates who do not have full authorisation to work in Ireland.
Applications submitted without the necessary visa in place will not be considered.
If the position above is of interest to you and you would like to know more, please call Arlene today on 0860651940 in complete confidence.
AC
....Read more...
4 Day working week (Monday to Thursday), 8% combined pension scheme, 33 holidays, flexible working hours and the opportunity to produce components for a number of high profile industries are just a few of the perks that the CNC Miller will enjoy whilst working with this highly respected manufacturing organization.
This organization is an end-to-end engineering business which supplies critical flow-control products to a number of high-profile industries, including Defense, Oil & Gas, and Chemical Processing. Since their establishment 75 years ago, this family owned business now employs over 60 people at their Keighley based engineering facility.
Because of their ever growing order book, this impressive manufacturer are actively searching for a CNC Miller to join their team on a permanent basis.
The successful CNC Miller will easily be able to commute to the NORTH BRADFORD facility from surrounding towns & cities, including Keighley, Ilkley, Skipton, Colne, Nelson, Burnley, Barnoldswick, Shipley and northern parts of Halifax.
Key Responsibilities of the CNC Miller will include:
Programming, setting and operating a variety of Machining Centres order to produce complex components for use in the Naval Marine, Oil & Gas and Chemical sectors
Reading, interpreting and working directly from engineering drawings and technical diagrams, ensuring that strict quality tolerances are achieved in-line with specification
Self-inspection, carrying out mechanical/visual inspection using various measuring instruments
Actively participating in continuous improvement activities and identifying process improvements as necessary
For the CNC Miller role, we are keen to receive CVs from individuals who possess:
IDEAL NOT ESSENTIAL - Formal qualifications within a relevant discipline (Apprenticeship, HNC, HND, BTEC/NVQ/City & Guilds Level 3 etc.)
Stable & relevant experience working in a similar role, with Milling and/or Turning experience
The ability to generate new programs using any machine control (Fanuc, Mazatrol, Heidenhain, Siemens, Prototrak, HAAS etc.)
In return, the CNC Miller will receive:
Renumeration: Up to £33,522.84 per annum (£16.53 per hour)
Holiday Entitlement: 33 Days including bank holidays
Pension Scheme: 8% Combined contribution (4% matched)
Working Hours: 39 Per week spread across 4 days - Monday to Thursday – 06:00 to 17:00
Opportunity to work frequent overtime, paid at 150%
To apply for the CNC Miller position, please click “Apply Now” and attach a copy of your CV. Alternatively, please contact Callum Good at E3 Recruitment for more information.....Read more...
Job title: Executive LNG Commercial Operator
Location: Singapore
Who are we recruiting for?
Executive Integrity is partnering with a prominent client in the Maritime and Renewable Energy sectors to identify a qualified and motivated Executive for their LNG Commercial Operations team. Our client is a global player committed to sustainable practices, contributing a portion of their profits to Renewable World, a charity focused on innovative renewable energy solutions for impoverished communities.
What will you be doing?
As an Executive in LNG Commercial Operations, you will:
Act as the owner’s representative for a fleet of LNG carriers under long-term charter agreements.
Administer project budgets in collaboration with Ship Managers, ensuring financial prudence and adherence to approved budgets.
Conduct high-level marine and operational analyses for potential opportunities, providing valuable insights for decision-making.
Manage internal approval processes and liaise with Technical and Commercial Teams worldwide.
Develop and nurture relationships with existing and potential clients, fostering a positive and collaborative atmosphere.
Ensure effective governance and compliance with commercial and ship management contracts, including time charterparties and ship management agreements.
Resolve commercial disputes, liaising with charterers, reviewing off-hire reconciliation statements, and negotiating time charterparty performance claims.
Implement vigorous control and review of ship technical manager actual spend versus budget.
Maintain effective communication with stakeholders, including charterers, ship technical managers, finance teams, and P&I Club.
Prepare and submit reports to Senior Management, Headquarters, Board of Directors, and Shareholders as per agreed deadlines.
Support the Finance Team in budget document preparation and long-term P&L projections.
Assist the insurance manager in minimizing impact to P&L, ensuring rightful claims are raised and recovered.
Organize and prepare monthly KPI scorecards, OPEX reports, and quarterly business reports for stakeholders.
Act as an owner representative, assisting the Manager during crisis management situations and deputizing when required.
Are you the ideal candidate?
The ideal candidate will possess:
A degree in maritime and/or business.
Good working knowledge of LNG or shipping commercial operations.
Familiarity with LNG time charter and shipbuilding contractual terms, along with associated commercial agreements.
Ability to read basic financial statements and demonstrate numerical astuteness in managing budgets (USD$ millions).
Excellent communication skills, both written and verbal, with a strong ability to engage with stakeholders worldwide.
Commercial acumen, attention to detail, and the ability to manage multiple tasks independently.
Strong negotiation and dispute resolution skills.
What’s in it for you?
As the successful candidate, you can expect:
Growth opportunities in a global organization committed to sustainability.
Competitive remuneration with a bonus structure.
Comprehensive benefits package, including childcare vouchers and pension contributions.
Engaging company culture that values creativity, determination, and collaboration.
Who are we?
Executive Integrity is a leading global executive search and recruitment consultancy specializing in the Maritime and Renewable Energy sectors. Committed to sustainability, we donate a portion of our profits to Renewable World, supporting innovative solutions for communities in need.....Read more...
Cranes Engineer Surveyor – Engineer Surveyor – Cranes and Lifting Equipment – Cambridge Region - Total package circa £55,000 with a basic of £42,000, bonus, Generous pensionAre you an engineer with experience of maintaining, servicing, or inspecting any type of lifting equipment or cranes? Are you interested in a career with a huge test, inspection and certification company with over a hundred and fifty years of history?You will be rewarded with an extensive benefits package and have over £55,000 training invested in you within the first 12 months. In addition, you will receive a basic of £42,000 (rising to £45,000 after 12 months service and £50,000 after 24 months ) with 10% contributory pension, yearly bonus and £5500 car allowanceThe CompanyServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring pressure equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationsCambridge & SurroundingEngineer Surveyor Package:Getting you to work
Company Car Allowance (£5500)
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12 week modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 5 different career options
Securing your future
Employer pension contribution 7.5% increasing to 10% with a 2.5% employee contributionCompany wide bonusAnnual review
Work life balance
33 days holiday including statutory holidays the ability to buy and sell extra days45 hour flexible working week which allows homelife balanceWorking week paid door to door with vast opportunities for overtime which is not mandatoryHome based role Centralised diary management team assist in booking your appointments
Looking after your family
Life cover of 2 times salary
Engineer Surveyor Main Accountabilities:
Inspection and certification of lifting equipment & cranesWorking to LOLER and PUWER regulationsManaging diary and clients with patchMaintaining client relationshipsFull Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
HNC or Level 4 qualification equivalent or above in any engineering discipline Hands on experience of fixing, inspecting, maintaining, repairing or servicing any lifting equipment or cranes UK Driving licenceCustomer facing skills
Cranes Engineer Surveyor – Engineer Surveyor – Cranes and Lifting Equipment – Cambridge Region - Total package circa £55,000 with a basic of £42,000, bonus, Generous pension....Read more...
Crane Engineer Surveyor – Engineer Surveyor – Cranes and Lifting Equipment – Swindon - £41,000 Basic + Company car or Car allowance, private health, double matching pensionAre you an engineer with experience of maintaining, servicing or inspecting any type of lifting equipment or cranes? Are you interested in a career with a huge test, inspection and certification company with over a hundred and fifty years of history?You will be rewarded with an extensive benefits package and have over £55,000 training invested in you within the first 12 months. In addition, you will receive a basic of £41,000 with a great contributory pension, yearly bonus and company car or car allowance The CompanyServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring lifting equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationsSwindonEngineer Surveyor Package:Getting you to work
Company Car or Car Allowance
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12 week modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 8 different career options
Securing your future
Employer double matching pension contributions up to 8%Guaranteed annual review
Work life balance
33 days holiday including statutory holidays the ability to buy and sell extra days40 hour flexible working week which allows homelife balanceWorking week paid door to door with vast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Engineer Surveyor Main Accountabilities:
Inspection and certification of cranes and lifting equipment (Gantry, Crawler, Scissor lift, Mobile Elevated Work Platforms, Excavators, FLT’s)Working to LOLER and PUWER regulationsManaging diary and clients with patch
Maintaining client relationships
Full Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
Level 4 qualification in eg HNC and above (Mechanical based subject)Hands on experience of fixing, inspecting, maintaining, repairing or servicing any lifting equipment or cranes UK Driving licenceCustomer facing skills
Crane Engineer Surveyor – Engineer Surveyor – Cranes and Lifting Equipment – Swindon - £41,000 Basic + Company car or Car allowance, private health, double matching pension....Read more...
Crane Engineer Surveyor – Engineer Surveyor – Cranes and Lifting Equipment – Derby - £41,000 Basic + Company car or Car allowance, private health, double matching pensionAre you an engineer with experience of maintaining, servicing or inspecting any type of lifting equipment or cranes? Are you interested in a career with a huge test, inspection and certification company with over a hundred and fifty years of history?You will be rewarded with an extensive benefits package and have over £55,000 training invested in you within the first 12 months. In addition, you will receive a basic of £41,000 with a great contributory pension, yearly bonus and company car or car allowance The CompanyServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring lifting equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationsDerbyEngineer Surveyor Package:Getting you to work
Company Car or car Allowance
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12 week modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 8 different career options
Securing your future
Employer double matching pension contributions up to 8%Guaranteed annual review
Work life balance
33 days holiday including statutory holidays the ability to buy and sell extra days40 hour flexible working week which allows homelife balanceWorking week paid door to door with vast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Engineer Surveyor Main Accountabilities:
Inspection and certification of cranes and lifting equipment (Gantry, Crawler, Scissor lift, Mobile Elevated Work Platforms, Excavators, FLT’s)Working to LOLER and PUWER regulationsManaging diary and clients with patch
Maintaining client relationships
Full Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
Level 4 qualification in eg HNC and above (Mechanical based subject)Hands on experience of fixing, inspecting, maintaining, repairing or servicing any lifting equipment or cranes UK Driving licenceCustomer facing skills
Crane Engineer Surveyor – Engineer Surveyor – Cranes and Lifting Equipment – Derby - £41,000 Basic + Company car or Car allowance, private health, double matching pension....Read more...
Assistant Branch Manager
An Assistant Branch Manager / Branch Supervisor with a hands-on mentality is required for the flagship branch of a family-run distributor supplying automotive, industrial, marine and leisure markets across the Southwest.
The Assistant Branch Manager / Branch Supervisor will support the Branch Manager in the day-to-day management of an established and experienced team of around 15, covering sales and distribution.
We are particularly keen to hear from candidates with an electrical wholesale, electrical distribution, automotive parts distribution, industrial distribution, engineering supplies or builder’s merchants background, although this is by no means essential.
Branch Based – Commutable from – Bristol, Bath, Long Ashton, Stoke Gifford, Portbury, Portishead, Congresbury, Chew Magna, Warmley, Saltford, Thonbury, Nailsea, Iron Acton, Yate, Keynsham, Clevedon
££competitive salary + branch-based performance bonus + pension + 20 days holiday plus bank holidays + use of a company vehicle + full product training
The Candidate
Previous supervisor / team leader experience is required, ideally in a distribution or wholesale environment. We are also open to candidates ready to make that step into an Assistant Branch Manager role.
Hands on sales experience and the ability to develop business relationships.
An understanding of branch operations.
A technical aptitude with the ability and willingness to learn, retain and relay product information.
Our ideal candidate may have experience of working within an electrical, industrial or Engineering wholesale environment or have an automotive parts distribution / motor factor background.
The Role
Demonstrate a hands-on approach providing support and assistance across all areas of the branch.
Support the Branch Manager (and deputise in their absence) across the following areas:
Provide training, coaching development and motivation to the team.
Be aware of and assess local market conditions and identify current and prospective sales opportunities.
Direct all operational aspects including distribution operations.
Liaise with buying and distribution teams at head office to ensure correct inventory levels are maintained.
Manage branch health and safety requirements in line with HSE legislation and company health and safety policies.
Work with the management team to achieve branch targets.
Locate areas of improvement and propose corrective actions to leverage growth opportunities.
Apply in Confidence
To apply for the position of Assistant Branch Manager / Branch Supervisor please forward your CV to Kayleigh Bradley, Senior Recruitment Consultant at Glen Callum Associates Ltd or call Kayleigh directly on 07908 893621 for a further chat on the job.
Don’t delay, we’re hiring now, apply today!
JOB REF 4121KB – Assistant Branch Manager - Distribution
Glen Callum Associates are a leading automotive and industrial recruitment agency for sales, operational and marketing positions.....Read more...
Deputy Quality Operational Excellence Manager (Fluent French required) – London – £70,000 + Car Allow. + Bonus + Ex. Benefits – PermanentPrimary Purpose: Lead and actively participate in our client’s quality improvement initiatives across operational departments by leading projects focused on root cause analysis of quality issues. Ensuring the timely implementation of agreed solutions to enhance quality standards.Benefits:
Remuneration: Competitive salary, an excellent package and hybrid working.
Leadership Opportunities: Lead global quality improvement initiatives, shaping standards across departments.
Professional Growth: Gain and build on your extensive experience in quality methods and procedures, enhancing skills in problem-solving and project management.
International Exposure: Collaborate with multinational teams, broadening your global perspective and professional network.
Impactful Work: Drive organisational excellence by managing projects focused on enhancing quality standards, making a meaningful impact on the company’s success.
Key Responsibilities:
Lead process improvement activities for operations and services, focusing on problem identification and resolution.
Manage a comprehensive Root Cause Analysis (RCA) program for significant quality issues, overseeing progress from initiation to closure.
Coordinate and ensure completion of preventative actions, implementing error-proof solutions derived from RCAs, investigations, and Lessons Learned.
Analyse Costs of Non-Quality (CNQ) related to operations and services, proposing and managing action plans for timely resolution using quality tools such as 8D, DMAIC, or Value Stream Mapping.
Track, analyse, and report on Quality Key Performance Indicators (KPIs) in executive meetings.
Lead the shift towards a more project management-oriented approach, particularly concerning Industrial Projects and Marine Projects, in alignment with Vice Presidents (VPs).
Collaborate with VPs to identify projects, define scope and timescales, and take ownership of resource allocation and priorities for the execution of RCA projects.
Facilitate discussions on scope and deliverables during project kick-off meetings, identify technical experts, and determine appropriate tools for project execution, ensuring successful outcomes within project deadlines.
Requirements:
Extensive experience in quality methods and procedures within industrial environments.
Minimum of 10 years of experience in quality/industrial roles, with international work experience.
Proficiency in technical and quality management, with a background in continuous improvement projects.
Strong ability to prioritise workload, adapt to changing requirements, and perform under pressure.
Excellent written and oral communication skills, proficient in PC literacy.
Ability to work autonomously, delivering successful outcomes within project deadlines.
Proficient in managing cross-functional teams at all organisational levels.
Qualifications:
Relevant technical degree or higher in engineering, technology, or operations.
Six Sigma Trained to Green or Black Belt level, or equivalent.
Ideally, candidates will possess recognised qualifications in Quality auditing.
Fluency in both French and English at a business level is essential.
How to apply: To apply for this excellent opportunity, please send me your CV to or contact Rob Hutchings at 02392 314679. ....Read more...
JOB DESCRIPTION
Position Summary:
Carboline is seeking a Chemist located in Greensboro, North Carolina. This person will be responsible for applying and interpreting standard scientific or engineering theories, concepts, and techniques, requiring a working knowledge of related disciplines. This position is looking for someone who will be developing new products and/or maintaining existing products. Prior knowledge of the development, adaptation, and formulation of paint and coatings is necessary. Having previous experience with the formulation of materials like; epoxy, urethane, vinyl ester, acrylic, alkyd, polysiloxane, and polyurea coatings for protective and marine applications, is preferred.
Requirements:
4-year Chemistry degree or equivalent experience, 10-15+ years Chemistry experience. Must have prior experience formulating paint/coatings.
Physical Requirements:
Lifting up to 50 pounds; exposure to chemicals including but not limited to: Amines, Polyamides, Isocyanates, Epoxies, Alkyds, Acrylics, and certain inorganic compounds. Personal protective equipment would be utilized. Must pass annual respirator medical evaluation and pulmonary function test as required by OSHA. Essential Functions: • Working with lab director and sales management to design, develop, test, and introduce new and innovative coating solutions. • Development of new wall and floor products for application in industrial, architectural, universities and biological research laboratories. • Maintaining existing products. • Acquiring and using skills with in-house formulation and manufacturing software system. • Assisting in development of new product SDS's. • Position reports to Lab Director
Who We Are:
Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply. "In order to be the best, we must hire the best"Apply for this ad Online!....Read more...
Crane Engineer Surveyor – Engineer Surveyor – Cranes and Lifting Equipment – Fife- £38,000 - £41,0000 basic + Company car or Car allowance, private health, double matching pensionAre you an engineer with experience of maintaining, servicing or inspecting any type of lifting equipment or cranes? Are you interested in a career with a huge test, inspection and certification company with over a hundred and fifty years of history?You will be rewarded with an extensive benefits package and have over £55,000 training invested in you within the first 12 months. In addition, you will receive a basic of between £38,000 - £41,000 with a great contributory pension, yearly bonus and company car or car allowance The CompanyServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring lifting equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationsFifeEngineer Surveyor Package:Getting you to work
Company Car or car Allowance
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12 week modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 8 different career options
Securing your future
Employer double matching pension contributions up to 8%Guaranteed annual review
Work life balance
33 days holiday including statutory holidays the ability to buy and sell extra days40 hour flexible working week which allows homelife balanceWorking week paid door to door with vast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Engineer Surveyor Main Accountabilities:
Inspection and certification of cranes and lifting equipment (Gantry, Crawler, Scissor lift, Mobile Elevated Work Platforms, Excavators, FLT’s)Working to LOLER and PUWER regulationsManaging diary and clients with patch
Maintaining client relationships
Full Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
Level 4 qualification in eg HNC and above (Mechanical based subject)Hands on experience of fixing, inspecting, maintaining, repairing or servicing any lifting equipment or cranes UK Driving licenceCustomer facing skills
Crane Engineer Surveyor – Engineer Surveyor – Cranes and Lifting Equipment – Fife- £38,000 - £41,0000 basic + Company car or Car allowance, private health, double matching pension....Read more...