Maintenance Jobs   Found 1,454 Jobs, Page 57 of 59 Pages Sort by: Relevance Date

Field Support Specialist

JOB DESCRIPTION Essential Duties and Responsibilities: Duties Description Assisting Sales Assisting the Sales Representative with sales process from prospecting to closing; developing business in assigned markets, providing solid market presence including serving customers. Assisting the Sales Representative in making sales. This work may include, but is not limited to: preparing and/or distributing marketing materials; inspection and evaluation of the property; preparing roof drawings and sketches; preparing scope of work documents; preparing proposals; attending sales calls; pricing patch and repair jobs; providing technical expertise; and attending meetings with the architect, contractor and/or owner. Inspections This work may include, but is not limited to: identifying; analyzing; and resolving any problems; and preparing reports to owners regarding the condition of roofs. When and where necessary or required, may perform QA/ QA+ inspections, Tremcare Gold Service (periodic visual inspection with minor repairs being addressed where detected on Tremco warranted roofs only). Monitoring Installation Visits to project sites to monitor installation of Tremco roofing products for the purpose of determining whether to issue a Tremco warranty. This work may include, but is not limited to: monitoring progress of the installation; identifying any aspect of installation that does not comply with specifications; reviewing and resolving concerns of architects, contractors and owners regarding Tremco's installation instructions; coordinating visits with contractors; and preparing reports on progress and problems for the Sales Representative. Troubleshooting Identifying problems arising during installation and the lifecycle of the roof. This work may include but is not limited to: identifying source(s) of leaks; analyzing problems to determine the best solution; monitoring implementation of the solution; and preparing written action plans. This work will represent less than 45% of the SA's time Manual Labor Performing patch and repair work for small leaks that can be performed quickly after identifying the leak and other infrequent, limited physical labor. Performing minor maintenance (caulking, flashing touch up, applying small amounts of mastic, removing debris, etc.) to prevent potential leaks. Other Work This work may include but is not limited to: conducting diagnostic infra-red scans of roofs; taking photographs; preparing CADD drawings; and delivering or picking up samples, documents or small products from/to architects, owners and contractors. Education and/or Experience: Minimum: Associates degree or equivalent from two-year college or technical school; or combination of education and experience. Must have a minimum of two to three years of related hands-on experience and/or training in a similar role. Prior sales and/or customer related experience in roofing industry required. Qualifications: Thorough understanding and application of roofing and waterproofing contracting standards. Experience with MS Word, Excel and familiarity with CADD Excellent written and verbal communication skills. Excellent interpersonal and organizational skills. Ability to build relationships and deliver exceptional customer service. Good analytical, troubleshooting, and problem-solving skills. Language Skills: Ability to read, analyze and interpret general business and technical information, e.g. professional journals and periodicals, technical procedures, or governmental regulations. Ability to draft reports, business correspondence and similar documents. Ability to effectively present information and respond to questions from customers, contractors, and architects. Ability to communicate business and technical information (e.g. information relating to status of projects, remediation plans, and customer concerns) to Sales Representative. Mathematical Skills: Intermediate skills: ability to calculate figures and amounts such as discounts, interest, commissions, proportions, area, circumference and volume. Reasoning Ability: High skills: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Physical Demands: Ability to climb interior/exterior ladders to access roofs and carry equipment up to approximately fifty pounds over short distances. Ability to walk along roof top edges (i.e., no fear of heights, good balance). Tolerance to exposure to outside weather conditions (heat, cold, etc.). Apply for this ad Online! ....Read more...

Machine Operator Nights

JOB DESCRIPTION Founded in 1921, the same passion that drove the Captain to create the world's first rust-preventative paint still drives us today. When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry. Our creative and talented team of over 2,000 people across every corner of the world help us remain the global leader in protective paints and coatings for both home and industry. Solving challenges is the very foundation of who we are. After all, our founder, sea captain Robert Fergusson, didn't particularly set out to invent rust preventive paint. He just wanted to keep his ship intact and stumbled upon a valuable solution. Today, that discovery is Rust-Oleum Corporation. As our Machine Operator, you will help Rust-Oleum deliver our product on time by operating, setting up, adjusting, performing QC checks and managing changeover on the line. Whatever it takes to meet, and exceed, our daily production goals. Every day you will troubleshoot machines and unforeseen challenges working alongside a fast-paced team you can rely on. To thrive you must have a high school diploma or GED and experience working high-speed equipment as a Machine Operator in a filling or packaging environment. Typical tasks for this position include (but are not limited to) the following: Change over equipment, adjust equipment, or otherwise adjust machines to improve equipment performance and quality. Inspect and examine products for quality, packaging accuracy, conformance to specifications, and external defects. Set and adjust speed, temperature, product flow, and positions and tolerances of equipment. Examine job orders to determine details such as quantities to be filled, production times, stock specifications, BOM's, and SKU sequences. Monitor filling equipment to maintain specified operating levels and to detect malfunctions, making adjustments as necessary. Operate equipment at most efficient speed to ensure proper quality and output. Responsibility for the equipment performance, efficient changeovers, operation, and preventative maintenance. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class. Responsibilities/Expectations: Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies. Required Skills: High school graduate or equivalent. Ability to read and fully understand batch cards and instructions to effectively communicate directions to other associates. Ability to do basic math. Ability to read and understand various meters, scales and electronic read outs. Ability to enter computer data. Industrial experience is desirable. Good mechanical aptitude. Ability to coordinate the work of others. Ability to solve problems in a team environment. Ability to lift 75 pounds ABOUT US Solving challenges is the very foundation of who we are. After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint. When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution. Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today. When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry. Our creative and talented team of over 3000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.Apply for this ad Online! ....Read more...

Microsoft M365 Solutions Developer

JOB DESCRIPTION The Microsoft M365 Solutions Developer leverages their expertise in the Microsoft 365 platform to design and develop applications and automations that enhance business processes following Agile methodologies. They collaborate directly with stakeholders to gather requirements, analyze needs, and implement effective, secure solutions using SharePoint Online, Power Apps, Power Automate, and Power BI. In this role, they will prototype and develop scalable solutions that drive digital transformation, streamline workflows, and improve operational efficiency. Additionally, they provide support for the implementation, enhancement, integration, and maintenance of applications across the organization. While the M365 Solutions Developer is expected to work independently, they may also contribute as part of a project team when needed. Responsibilities Provide programming expertise in the design, development, and implementation of initiatives to support business processes utilizing various M365 tools and platforms such as SharePoint Online, Power Platform, SQL Server, Office 365 and others, with a focus on secure, intuitively designed solutions Collaborate with business stakeholders, IT teams, and end users to gather requirements, troubleshoot issues, and provide ongoing support of applications and systems. Support of continuous improvement and optimization of the existing MS 365 application environment and providing enhancements to solutions to meet evolving business objectives. Conduct technical research with recommendations for action focusing on advancing technologies, methodologies, software, to ensure support of future business requirements. Implement security, governance, and compliance best practices within M365 applications, ensuring data integrity, role-based access control, and adherence to company policies. Requirements Bachelor's Degree in IT or related field. Microsoft Certified Solutions Developer (SharePoint/Power Platform, etc) certification preferred. 2+ years' experience in Microsoft 365 with Power Platform and SharePoint Online development. Strong expertise in Power Apps, Power Automate, and SharePoint Online. Experience with Power Platform, SharePoint Online and Microsoft Teams integration. Experience with SharePoint Lists, SQL Server, and other M365 data sources to support Power Platform development. Experience implementing secure solutions that follow compliance and governance best practices. Strong UI design skills, including responsive design. Strong problem-solving, communication, and collaboration skills. Skills Preferred: Experience using the M365 Suite (Outlook, Excel, PowerPoint, Teams, Forms, OneDrive). Knowledge of Power BI for reporting and analytics, and application integration. Experience with Active Directory and Entra ID. Experience with web services including REST, SOAP and/or WebAPI. Experience with Agile development methodology. Benefits: Medical, Dental and Vision Insurance Company Provided Life Insurance Paid Time Off (PTO) Company-paid short-term and long-term disability 401(k) plans Employer-funded pension plan Tuition Reimbursement Pay Range 90,000 to 110,000 per year. About DAP DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products. DAP is part of RPM International Inc., a $7.3 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores. DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers. Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/ DAP - On the job since 1865.Apply for this ad Online! ....Read more...

Facades Network Analyst

JOB DESCRIPTION Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. GENERAL PURPOSE OF THE JOB: Analyzes the flow of offsite fabrication/Panelization processes, identifies needs, tracks performance, evaluates risks/opportunities and drives improvements in the supply chain process to effectively balance supply and demand and improve operational execution. ESSENTIAL DUTIES AND RESPONSIBILITIES: Works with the Optimization Manager and key stakeholders in sales, marketing, and operations to determine key demand requirements and gain consensus on short (monthly) and long-term (12 months+) demand, supply, and inventory targets. May occasionally lead elements within the process or the development of innovative supply chain and operational solutions. Supports the development of innovative supply chain solutions and tools to support drive strategic and tactical decision-making. Determines inventory needs including but not limited to quantity, quality, location, etc. Identifies significant and/or critical supply-demand imbalances. Works with Operations and procurement to solve and communicates with business leaders effectively and timely to allow for proactive resolution. Analyzes delivery performance through statistical analysis and data-driven decision-making tools. Manages and tracks key optimization and execution metrics for the facades offsite business and other assigned strategic initiatives. Assists with the development and execution of network models, capacity analysis, system standards, as well as the replenishment and redistribution of inventory within the network. Identifies current state and potential future state flows of the fabrication, panelization, and offsite business from supply chain to internally fabricated façade finish and external third-party capacity. Provides continuous process mapping support as new methods and sites are added to the network. Travels to sites in the network to fully understand processes and workflows. In scope deliverables include all upstream products that are part of the system. Completes or leads special projects or other supply chain functions as assigned. EDUCATION REQUIREMENT: A bachelor's degree in business or supply chain-related field. EXPERIENCE REQUIREMENT: 2-4 years related experience or training Educational experience with a degree in Supply Chain or professional experience including one year in demand planning. Hands on experience with SAP APO and BI modules utilized for demand planning, preferably in a manufacturing environment. Experience in formulating and implementing optimization models is a plus. Must have experience manipulating and analyzing complex, high-volume, highly dimensional data from varying sources as well as driving the collection of new data. CERTIFICATES, LICENSES, REGISTRATIONS: APICS preferred, or green belt desired. OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: Preferred SAP APO and BW knowledge. Strong MS office skills, with advanced proficiency in Excel. Knowledge of analytical techniques in optimization, and statistical modeling. Strong analytical and problem-solving skills. Ability to collaborate across the organization. Demonstrates strong verbal and written communication skills with active listening practices. Self-managed and motivated to contribute individually as well as a member of the team. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs. BENEFITS AND COMPENSATION: The salary range for applicants in this position generally ranges between $64,499 and $80,625 . This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...

Supply Chain Network Analyst

JOB DESCRIPTION Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. GENERAL PURPOSE OF THE JOB: The Supply Chain Network Analyst analyzes optimization efforts, identifies business needs, tracks performance metrics, evaluates risks/opportunities and drives improvements in the supply chain process. Effectively communicates to leadership and leads initiatives in support of the Supply Chain Optimization Manager. ESSENTIAL DUTIES AND RESPONSIBILITIES: Works with the Optimization Manager and key stakeholders in sales, marketing, and operations to determine key supply initiatives and inventory targets. Maintain Dryvit SIOP process - monthly plant meetings and network inventory management. Analyzes data to help set DOI targets and manage deliverables for OSD reduction process and excess inventory reduction efforts. Determines inventory needs including but not limited to quantity, quality, location, etc. Create cross functional accountability in optimization projects. Manage PIF process and after launch follow- ups for new products and exits. Dryvit SKU rationalization - work with inventory specialist to analyze data, change status, and balance existing product amongst plants. Supports the development of innovative supply chain solutions and tools to support drive strategic and tactical decision-making. Identifies significant and/or critical supply-demand imbalances. Works with Operations and procurement to solve and communicates with business leaders effectively and timely to allow for proactive resolution. Assists with the development and execution of network models, capacity analysis, system standards, as well as the replenishment and redistribution of inventory within the network. Identifies current state and potential future state flows of the fabrication, panelization, and offsite business from supply chain to internally fabricated façade finish and external third-party capacity. Provides continuous process mapping support as new methods and sites are added to the network. Travels to sites in the network to fully understand processes and workflows. In scope deliverables include all upstream products that are part of the system. Completes or leads special projects or other supply chain functions as assigned. EDUCATION REQUIREMENT: A bachelor's degree in business or supply chain-related field. EXPERIENCE REQUIREMENT: Educational experience with a degree in Supply Chain or professional experience including one year in demand planning. Hands on experience with SAP APO and BI modules utilized for demand planning, preferably in a manufacturing environment. Experience in formulating and implementing optimization models is a plus. Must have experience manipulating and analyzing complex, high-volume, highly dimensional data from varying sources as well as driving the collection of new data. CERTIFICATES, LICENSES, REGISTRATIONS: APICS preferred, or green belt desired. OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: Preferred SAP APO and BW knowledge. Strong MS office skills, with advanced proficiency in Excel. Knowledge of analytical techniques in optimization, and statistical modeling. Strong analytical and problem-solving skills. Ability to collaborate across the organization. Demonstrates strong verbal and written communication skills with active listening practices. Self-managed and motivated to contribute individually as well as a member of the team. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs. BENEFITS AND COMPENSATION: The salary range for applicants in this position generally ranges between $65,000 and $75,000 plus a bonus opportunity. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...

Recreation Assistant Apprentice

GLL is a not for profit charitable social enterprise committed to delivering a better quality of fitness and leisure, libraries and performing arts facilities for everyone. We're committed to providing access to quality community facilities - and more - at a price everyone can afford. We already manage over 258 facilities, and we're adding more all the time operating under our 'Better' brand. To be accepted onto this apprenticeship you will be required to successfully complete your NPLQ (National Pool Lifeguard qualification). Unlike many other brands, we are for everyone. Community is at the heart of everything we do, and we want to make sure that everyone can live a healthy and active lifestyle. What's more, when you apply for a job at GLL, you can enjoy our range of employee benefits including: Pension schemes Discounted leisure centre and gym memberships Ride to work scheme As a Lifeguard your passion for swimming and love of great customer service will shine through when supervising our customers in the pool, as well as supporting the team in keeping our centres clean and tidy. Your role will include: Customer Experience Understanding the services and products on offer to assist with customer questions and queries Supporting different types of customers with different needs Supporting the centre in gaining customer feedback on our products and services including dealing with customer complaints Support the centre to deliver swimming lessons where required (qualification dependant) Sharing knowledge with customers on the role exercise plays in health and wellbeing Conducting customers' gym inductions and health screening where required (qualifications dependant) Planning and delivering exercise sessions to meet customers' health and fitness goals People Experience Supporting GLL's visions and values Attend and participate in all apprenticeship workshops, meetings and reviews with your tutor and General Manager Ensure all training and qualification deadlines are met in agreement with your tutor and manger Achieve and maintain all necessary qualifications including ongoing CPD training Keep up-to-date with trends and developments in the leisure industry Business Performance Have an understanding of GLL and its position in the Health & Fitness Industry Understand the performance of the centre(s) that you are working in and the external and internal factors that can affect performance Operations Performance and Risk Management Support the centre to open and close the building Supervising and lifeguarding customers in swimming pools Setting up and taking down different types of equipment for activities such as badminton, exercise classes and 5-a-side football Cleaning and maintenance of different areas of the centre Personal Effectiveness and Development Demonstrates and lives GLL People with Purpose values Personally demonstrates equality, inclusion and diversity in their behaviours and actions You will be enrolled on a Leisure Team Member apprenticeship programme which takes approximately 18months to complete as well as completing the following qualifications throughout the length of your apprenticeship: - National Pool Lifeguard Qualification (NPLQ) - First Aid at Work (Level 3) - STA Award in Teaching Swimming - STA Certificate in Teaching Swimming - Level 2 Gym InstructorTraining: Leisure Team Member Apprenticeship Level 2, including Functional Skills in Maths and English Training Outcome:GLL prides itself on its internal Learning & Development and internal promotion levels, there is scope for the right candidates to move onto a level 3 apprenticeship once they have completed their level 2.Employer Description:Welcome to Leatherhead Leisure Centre - your go-to destination for family-friendly fitness and fun in the heart of Mole Valley. We offer a wide range of activities and state-of-the-art facilities designed for all ages and abilities, including three swimming pools, a modern gym, fitness studios, soft play and outdoor play park, tennis courts, and multi-use sports pitches. From swimming lessons for all ages and family swim sessions to fitness classes like yoga and Pilates, junior gym sessions, anWorking Hours :40 hours per working week. Shift work including evenings and weekends. Exact shifts to be confirmed.Skills: Team Working,Organisation Skills ....Read more...

Recreation Assistant Apprentice

GLL is a not for profit charitable social enterprise committed to delivering a better quality of fitness and leisure, libraries and performing arts facilities for everyone. We're committed to providing access to quality community facilities - and more - at a price everyone can afford. We already manage over 258 facilities, and we're adding more all the time operating under our 'Better' brand. To be accepted onto this apprenticeship you will be required to successfully complete your NPLQ (National Pool Lifeguard Qualification). Unlike many other brands, we are for everyone. Community is at the heart of everything we do, and we want to make sure that everyone can live a healthy and active lifestyle. What's more, when you apply for a job at GLL, you can enjoy our range of employee benefits including: - Pension schemes - Discounted leisure centre and gym memberships - Ride to work scheme As a Lifeguard your passion for swimming and love of great customer service will shine through when supervising our customers in the pool, as well as supporting the team in keeping our centres clean and tidy. Your role will include: Customer Experience. - Understanding the services and products on offer to assist with customer questions and queries - Supporting different types of customers with different needs - Supporting the centre in gaining customer feedback on our products and services including dealing with customer complaints - Support the centre to deliver swimming lessons where required (qualification dependent) - Sharing knowledge with customers on the role exercise plays in health and wellbeing - Conducting customers' gym inductions and health screening where required (qualifications dependent) - Planning and delivering exercise sessions to meet customers' health and fitness goals People Experience - Supporting GLL's visions and values - Attend and participate in all apprenticeship workshops, meetings and reviews with your tutor and General Manager - Ensure all training and qualification deadlines are met in agreement with your tutor and manger - Achieve and maintain all necessary qualifications including ongoing CPD training - Keep up-to-date with trends and developments in the leisure industry Business Performance - Have an understanding of GLL and its position in the Health & Fitness Industry - Understand the performance of the centre(s) that you are working in and the external and internal factors that can affect performance Operations Performance and risk management - Support the centre to open and close the building - Supervising and lifeguarding customers in swimming pools - Setting up and taking down different types of equipment for activities such as badminton, exercise classes and 5-a-side football - Cleaning and maintenance of different areas of the centre   Personal Effectiveness and Development - Demonstrates and lives GLL People with Purpose values - Personally demonstrates equality, inclusion and diversity in their behaviours and actions - You will be enrolled on a Leisure Team Member apprenticeship programme which takes approximately 18months to complete as well as completing the following qualifications throughout the length of your apprenticeship: o National Pool Lifeguard Qualification (NPLQ) o STA Award in Teaching Swimming o STA Certificate in Teaching Swimming o Level 2 Gym Instructor - Attend all monthly workshops and progressTraining: Leisure Team Member Apprenticeship Level 2 including Functional Skills in maths and English Training Outcome: GLL prides itself on its internal Learning & Development and internal promotion levels, there is scope for the right candidates to move onto a Level 3 apprenticeship once they have completed their Level 2 Employer Description:Southbury Leisure Centre located in the heart of Enfield, North London offers some fantastic affordable fitness facilities and leisure activities. Our 25 metre swimming pool hosts a range of swimming sessions to dive into. Push your fitness goals in our well-equipped gym with an extensive programme of group exercise classes. Follow up your workouts with a sauna to relax and unwind. Better Swim School caters for children of all age's abilities ensuring your children learn how to be safe in and Working Hours :40 hours per working week. Shift work including evenings and weekends. Exact shifts to be confirmed.Skills: Team Working,Organisation Skills ....Read more...

General Welder Apprentice

If you have (or are expecting to achieve) 3 GCSEs or equivalent (including English, Maths and Science) at C/3 Grade or better, you can apply to join this apprenticeship Programme. If you join our 3 year apprenticeship programme Speciality Steels you will receive training and development in our onsite training centre and within our Structural engineering department. General Welders Programme Summary: Year 1: Our Apprentices will study with Sheffield College at our onsite engineering training centre based at our Stocksbridge site until moving into their first site attachment area at Rotherham, Brinsworth or Stocksbridge which may include shifts. As a Speciality Steels Fabrication & welding apprentice you will achieve: Training to a competent standard on welding equipment including MMA/MIG and oxygen fuel burning Undertake welding and fabrication activities to create test pieces meeting international standards and surface inspections. Study towards the level 2 certificate required for the apprenticeship standard Preparation including all Health & Safety training ready for transition into the Structural and Fabrication Departments Year 2: As a 2nd year Apprentice you will move onto site attachments which may also include shifts within the Structural engineering department, which also will include the Rotherham, Stocksbridge & Brinsworth sites where you will: Prepare for your end point assessment Undertake Coded Welding Assessments Work along side our expert structural and welding engineers to gain experience in order to develop your skills in this field of engineering Year 3: In the final year of your apprenticeship you will: Continue to work along side our expert fabrication and welding engineers to gain further experience and progress to more complex tasks and projects within the structural and fabrication departments Complete your end point assessment Undertake a practical trade test and interview to confirm that you meet Speciality Steels high Training: General Welding (ARC processes) Level 2 Apprenticeship Standard - delivered at Stocksbridge Training Centre Training Outcome: You can expect to start your career as a team member in a specific department. After that the next step would be to become a Craft Team Member, then onto a Team Leader. After that, there are numerous career paths that you could follow You could become a Maintenance Technician, Engineerand Senior Engineer. Alternatively you might aim to be a Plant Engineer, Works Engineer and Director of Engineering Alternatively, you might choose to move around different specialisms ‐ from production planning to safety Employer Description:LIBERTY Steel UK is the third largest steel manufacturer in the country, with a footprint that covers nine sites across England, Scotland and Wales. It employs over 2,000 people and has an annual steel rolling capacity approaching three million tonnes. With steelmaking heritage dating back to 1842, LIBERTY Steel’s sites in the UK have a wealth of expertise thanks to our team of metallurgists, steelmakers, engineers and technicians. Our capabilities range from electric arc, vacuum induction melting, mill processing and value added services. The business manufactures and distributes products supplied mainly into the aerospace, construction, automotive, oil and gas and energy industries domestically and overseas to over 60 countries. The UK business sits within LIBERTY Steel Group, which is the GFG Alliance’s global steel manufacturing arm. With a total rolling capacity exceeding 18 million tonnes it is one of the top 10 producers globally, excluding China. Liberty Steel UK is playing an active role in meeting the group’s global ambition to be carbon neutral by 2030. Its Speciality Steels business in Rotherham uses an electric arc furnace – a less carbon-intensive form of producing steel than blast furnace production – to melt scrap steel for rolling into downstream products for a range of high-specification industries including oil & gas and aerospace. The UK business also has plans to create a GREENSTEEL hub at its Newport site using renewable energy from sister company SIMEC Atlantis’ Uskmouth biomass plant to power a new electric arc furnace.Working Hours :Initially Monday to Friday at the training centre and then moving to shift work with days and times to be agreed over a 7 day period.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness ....Read more...

Quality Inspector Apprentice

Under the guidance of our Quality team, you will learn how to perform inspections, measure materials and products, and contribute to continuous improvement initiatives across the company. Why Join Us? Hands-on Training: You will gain valuable experience across all facets of the engineering process, with a focus on the quality inspection function Comprehensive Career Development: Quartzelec is committed to your growth. Throughout your apprenticeship, you’ll receive tailored training, mentorship, and exposure to cutting-edge techniques, helping you advance your career in the engineering field. State-of-the-Art Facilities: Work alongside experienced inspectors and engineers in a facility equipped with the latest manufacturing, repair, and testing technologies, enabling you to learn in an innovative environment. Key Responsibilities: Assist in Quality Inspections: Learn and support in inspecting incoming materials, in-process production, and finished products to ensure compliance with quality standards. Conduct Goods Receipt Inspections: Assist in carrying out checks and inspections for received materials and components. Document Inspection Results: Record and maintain accurate inspection records, including measurements, test results, and observations. Identify Quality Issues: Assist in identifying quality issues during production, conduct investigations, and report findings to the team. Support Quality Audits: Help with internal and external quality audits to ensure that processes align with industry standards and regulatory requirements. Work with Suppliers: Participate in monitoring and auditing supplier processes, including machining, fabrication, plating, stamping, and laser cutting. Calibration Assistance: Assist in the calibration of workshop/inspection measuring tools to ensure accurate measurements. Promote Quality Awareness: Learn about quality control techniques and help promote a quality-focused culture across the company. Continuous Improvement: Contribute to identifying areas for improvement in quality processes and help implement solutions to improve standards and reduce defects. Learn Safety and Compliance: Gain an understanding of IECEx/ATEX standards, and assist in ensuring that components meet relevant safety and certification requirements. Support the Final Sign-Off Process: Assist with the final quality assurance checks and support the team in sign-off before project dispatch. Who we want… This is a 4-year Level 3 Engineering and Manufacturing Support Technician apprenticeship. The apprenticeship offers a comprehensive blend of hands-on learning, academic study, and industry experience, providing the perfect foundation for a successful career in the rotating machines engineering sector. Year 1: Full-Time Training at Midland Group Training Services (MGTS): During the first year, you will attend MGTS in Coventry on a full-time basis. This year will focus on building a strong foundation, learning both practical and theoretical aspects of the role. You will gain core skills essential for your apprenticeship, including engineering principles and hands-on techniques. Years 2–4: Day Release at MGTS: From year 2 onwards, you will attend MGTS on a day-release basis, continuing to develop your knowledge and skills. You’ll complete the educational components required for the program while gaining valuable on-the-job experience with Quartzelec. HNC & HND Opportunity: From year 3, you may have the opportunity to be supported in studying for a Higher National Certificate (HNC) in Engineering enhancing your qualifications and furthering your career prospects. Training: Level 2 Diploma in Advanced Manufacturing Engineering (Foundation Competence) BTEC Level 3 Diploma Engineering and Manufacturing Support Technologies (Development Knowledge) Level 3 Diploma in Advanced Manufacturing Engineering (Development Competence) Training Outcome:Quartzelec aims to offer permanent roles to all successful apprentices at the end of their training agreement wherever possible and to supporting continuing professional development.Employer Description:Quartzelec is a leading UK independent electrical engineering group delivering design, manufacturing, installation, maintenance and service solutions to customers across a broad range of industrial and commercial sectors.Working Hours :Mon - Thurs 08:00 - 16:00, Fri 08:00 - 12:00 Whilst at the training providerSkills: Communication skills,Attention to detail,Problem solving skills,Analytical skills,Team working,Organisation skills ....Read more...

Recreation Assistant Apprentice

GLL is a not for profit charitable social enterprise committed to delivering a better quality of fitness and leisure, libraries and performing arts facilities for everyone. We're committed to providing access to quality community facilities - and more - at a price everyone can afford. We already manage over 258 facilities, and we're adding more all the time operating under our 'Better' brand. To be accepted onto this apprenticeship you will be required to successfully complete your NPLQ (National Pool Lifeguard Qualification). Unlike many other brands, we are for everyone. Community is at the heart of everything we do, and we want to make sure that everyone can live a healthy and active lifestyle. What's more, when you apply for a job at GLL, you can enjoy our range of employee benefits including: Pension schemes Discounted leisure centre and gym memberships Ride to work scheme As a Lifeguard your passion for swimming and love of great customer service will shine through when supervising our customers in the pool, as well as supporting the team in keeping our centres clean and tidy. Your role will include: Customer Experience: Understanding the services and products on offer to assist with customer questions and queries Supporting different types of customers with different needs Supporting the centre in gaining customer feedback on our products and services including dealing with customer complaints Support the centre to deliver swimming lessons where required (qualification dependant) Sharing knowledge with customers on the role exercise plays in health and wellbeing Conducting customers' gym inductions and health screening where required (qualifications dependant) Planning and delivering exercise sessions to meet customers' health and fitness goals People Experience: Supporting GLL's visions and values Attend and participate in all apprenticeship workshops, meetings and reviews with your tutor and General Manager Ensure all training and qualification deadlines are met in agreement with your tutor and manger Achieve and maintain all necessary qualifications including ongoing CPD training Keep up-to-date with trends and developments in the leisure industry Business Performance: Have an understanding of GLL and its position in the Health & Fitness Industry Understand the performance of the centre(s) that you are working in and the external and internal factors that can affect performance Operations Performance and risk management: Support the centre to open and close the building Supervising and lifeguarding customers in swimming pools Setting up and taking down different types of equipment for activities such as badminton, exercise classes and 5-a-side football Cleaning and maintenance of different areas of the centre Personal Effectiveness and Development: Demonstrates and lives GLL People with Purpose values Personally demonstrates equality, inclusion and diversity in their behaviours and actions You will be enrolled on a Leisure Team Member apprenticeship programme which takes approximately 18 months to complete as well as completing the following qualifications throughout the length of your apprenticeship: National Pool Lifeguard Qualification (NPLQ) First Aid at Work (Level 3) STA Award in Teaching Swimming STA Certificate in Teaching Swimming Level 2 Gym Instructor Training: Leisure Team Member Apprenticeship Level 2 including Functional Skills in maths and English Training Outcome: GLL prides itself on its internal Learning & Development and internal promotion levels, there is scope for the right candidates to move onto a Level 3 apprenticeship once they have completed their Level 2 Employer Description:Newham Leisure Centre is home to a great range of facilities to help you stay fit and active. For the water lovers, our two swimming pools offer the perfect place to enjoy a fitness swim or make memories with friends and family whilst our two-level gym is equipped with a range of fitness equipment to help you on your health and fitness journey. We offer a diverse fitness class programme in our two studios plus there's a dedicated group cycle studio. With a running track, an eight-court sports hWorking Hours :Shift work including evenings and weekends. Exact shifts to be confirmed.Skills: Team Working,Organisation Skills ....Read more...

Recreation Assistant Apprentice

GLL is a not for profit charitable social enterprise committed to delivering a better quality of fitness and leisure, libraries and performing arts facilities for everyone.  To be accepted onto this apprenticeship you will be required to successfully complete your NPLQ (National Pool Lifeguard Qualification). Unlike many other brands, we are for everyone. Community is at the heart of everything we do, and we want to make sure that everyone can live a healthy and active lifestyle.What’s more, when you apply for a job at GLL, you can enjoy our range of employee benefits including:• Pension schemes• Discounted leisure centre and gym memberships• Ride to work scheme As a Lifeguard your passion for swimming and love of great customer service will shine through when supervising our customers in the pool, as well as supporting the team in keeping our centres clean and tidy. Your role will include:Customer Experience.• Understanding the services and products on offer to assist with customer questions and queries • Supporting different types of customers with different needs • Supporting the centre in gaining customer feedback on our products and services including dealing with customer complaints • Support the centre to deliver swimming lessons where required (qualification dependant)• Sharing knowledge with customers on the role exercise plays in health and wellbeing• Conducting customers’ gym inductions and health screening where required (qualifications dependant)• Planning and delivering exercise sessions to meet customers’ health and fitness goals People Experience• Supporting GLL’s visions and values • Attend and participate in all apprenticeship workshops, meetings and reviews with your tutor and General Manager • Ensure all training and qualification deadlines are met in agreement with your tutor and manger • Achieve and maintain all necessary qualifications including ongoing CPD training • Keep up-to-date with trends and developments in the leisure industry Business Performance• Have an understanding of GLL and its position in the Health & Fitness Industry • Understand the performance of the centre(s) that you are working in and the external and internal factors that can affect performance Operations Performance and risk management• Support the centre to open and close the building • Supervising and lifeguarding customers in swimming pools • Setting up and taking down different types of equipment for activities such as badminton, exercise classes and 5-a-side football• Cleaning and maintenance of different areas of the centre Personal Effectiveness and Development • Demonstrates and lives GLL People with Purpose values• Personally demonstrates equality, inclusion and diversity in their behaviours and actions• You will be enrolled on a Leisure Team Member apprenticeship programme which takes approximately 18months to complete as well as completing the following qualifications throughout the length of your apprenticeship:o National Pool Lifeguard Qualification (NPLQ)o First Aid at Work (Level 3)o STA Award in Teaching Swimmingo STA Certificate in Teaching Swimmingo Level 2 Gym Instructor• Attend all monthly workshops and progress meetings as per your apprenticeship standard• Fully participates and engages in GLL Management meetings, development programmes and on going assessment of performance• Develops skills through shared learning and peer learning community. At GLL, you will be working towards a Leisure Team Member Level 2 Apprenticeship Qualification over the course of 15 months.Training Outcome:GLL prides itself on its internal Learning & Development and internal promotion levels, there is scope for the right candidates to move onto a Level 3 apprenticeship once they have completed their Level 2.Employer Description:East Ham Leisure Centre is located in the heart of Newham and offers a variety of facilities and activities that cater for all individuals. Whether you are a senior looking to keep active or a junior wanting to kick-start your fitness journey, we provide membership options and activities that are inclusive of everyone.Working Hours :40 hours per working week. Shift work including evenings and weekends. Exact shifts to be confirmed.Skills: Communication skills,Customer care skills,Team working ....Read more...

Endoscopy Manager

A fantastic new job opportunity has arisen for a committed Endoscopy Manager to work in an exceptional independent private hospital next to Central London. You will be working for one of UK’s leading health care providers This is one of the UK’s largest independent charitable hospitals. Our commitment to our patients is in the quality of our care, the range of our services and the quality of our consultants and staff **To be considered for this position you must be qualified as a Registered Nurse with a current active NMC Pin** As the Endoscopy Manager your key responsibilities include:·         Assessing, planning, delivering and evaluation of a high level of Endoscopy patient care·         Leading the team in the role of team lead to ensure adherence to the 5 steps to safe interventional procedures and the safe and efficient running of the list·         Exhibiting a high level of teamwork with the wider hospital environment·         Participate fully as a team member, including working in areas such as stage 1 & 2 recovery to promote a cohesive team and the achievement of team objectives·         Effective management of resources within the department·         Participate in education, training and development of other staff·         Help to prevent cross infection by observing departmental policy regarding dress, the maintenance of a clean working environment, decontamination and sterilisation procedures and a high level of decontamination practice The following skills and experience would be preferred and beneficial for the role:·         Minimum 3 years’ experience within the role of Endoscopy Nurse·         Endoscopy competence within a range of procedures·         Competence in delivering a high level of Endoscopy care·         Good computer and numeracy skills·         Flexibility in response to needs of the department·         Ability to deliver a high level of customer service to patients and Consultants·         Good Team working skills The successful Endoscopy Manager will receive an excellent salary up to £50,078 per annum DOE. This exciting position is a permanent full time role working 37.5 hours a week. In return for your hard work and commitment you will receive the following generous benefits:·         Ongoing development and training·         27 days annual leave·         Generous private healthcare cover·         Contributory pension schemes – including continuation of the NHS pension·         Competitive pay with progressive band structuring·         Private healthcare cover of up to £20,000 per year·         Ongoing training and development programmes·         Discounts at local, national and online shops·         Interest-free season ticket loans·         Cycle to work loan scheme·         Employee "Service Excellence" recognition rewards Reference ID: 5960To apply for this fantastic job role, please call on 0121 638 0567 or send your CV to contact@jupiterrecruitment.co.uk ....Read more...

Endoscopy Nurse Lead

A fantastic new job opportunity has arisen for a committed Endoscopy Manager to work in an exceptional independent private hospital next to Central London. You will be working for one of UK’s leading health care providers This is one of the UK’s largest independent charitable hospitals. Our commitment to our patients is in the quality of our care, the range of our services and the quality of our consultants and staff **To be considered for this position you must be qualified as a Registered Nurse with a current active NMC Pin** As the Endoscopy Manager your key responsibilities include:·         Assessing, planning, delivering and evaluation of a high level of Endoscopy patient care·         Leading the team in the role of team lead to ensure adherence to the 5 steps to safe interventional procedures and the safe and efficient running of the list·         Exhibiting a high level of teamwork with the wider hospital environment·         Participate fully as a team member, including working in areas such as stage 1 & 2 recovery to promote a cohesive team and the achievement of team objectives·         Effective management of resources within the department·         Participate in education, training and development of other staff·         Help to prevent cross infection by observing departmental policy regarding dress, the maintenance of a clean working environment, decontamination and sterilisation procedures and a high level of decontamination practice The following skills and experience would be preferred and beneficial for the role:·         Minimum 3 years’ experience within the role of Endoscopy Nurse·         Endoscopy competence within a range of procedures·         Competence in delivering a high level of Endoscopy care·         Good computer and numeracy skills·         Flexibility in response to needs of the department·         Ability to deliver a high level of customer service to patients and Consultants·         Good Team working skills The successful Endoscopy Manager will receive an excellent salary up to £50,078 per annum DOE. This exciting position is a permanent full time role working 37.5 hours a week. In return for your hard work and commitment you will receive the following generous benefits:·         Ongoing development and training·         27 days annual leave·         Generous private healthcare cover·         Contributory pension schemes – including continuation of the NHS pension·         Competitive pay with progressive band structuring·         Private healthcare cover of up to £20,000 per year·         Ongoing training and development programmes·         Discounts at local, national and online shops·         Interest-free season ticket loans·         Cycle to work loan scheme·         Employee "Service Excellence" recognition rewards Reference ID: 5960To apply for this fantastic job role, please call on 0121 638 0567 or send your CV to contact@jupiterrecruitment.co.uk ....Read more...

Senior Endoscopy Nurse

A fantastic new job opportunity has arisen for a committed Endoscopy Manager to work in an exceptional independent private hospital next to Central London. You will be working for one of UK’s leading health care providers This is one of the UK’s largest independent charitable hospitals. Our commitment to our patients is in the quality of our care, the range of our services and the quality of our consultants and staff **To be considered for this position you must be qualified as a Registered Nurse with a current active NMC Pin** As the Endoscopy Manager your key responsibilities include:·         Assessing, planning, delivering and evaluation of a high level of Endoscopy patient care·         Leading the team in the role of team lead to ensure adherence to the 5 steps to safe interventional procedures and the safe and efficient running of the list·         Exhibiting a high level of teamwork with the wider hospital environment·         Participate fully as a team member, including working in areas such as stage 1 & 2 recovery to promote a cohesive team and the achievement of team objectives·         Effective management of resources within the department·         Participate in education, training and development of other staff·         Help to prevent cross infection by observing departmental policy regarding dress, the maintenance of a clean working environment, decontamination and sterilisation procedures and a high level of decontamination practice The following skills and experience would be preferred and beneficial for the role:·         Minimum 3 years’ experience within the role of Endoscopy Nurse·         Endoscopy competence within a range of procedures·         Competence in delivering a high level of Endoscopy care·         Good computer and numeracy skills·         Flexibility in response to needs of the department·         Ability to deliver a high level of customer service to patients and Consultants·         Good Team working skills The successful Endoscopy Manager will receive an excellent salary up to £50,078 per annum DOE. This exciting position is a permanent full time role working 37.5 hours a week. In return for your hard work and commitment you will receive the following generous benefits:·         Ongoing development and training·         27 days annual leave·         Generous private healthcare cover·         Contributory pension schemes – including continuation of the NHS pension·         Competitive pay with progressive band structuring·         Private healthcare cover of up to £20,000 per year·         Ongoing training and development programmes·         Discounts at local, national and online shops·         Interest-free season ticket loans·         Cycle to work loan scheme·         Employee "Service Excellence" recognition rewards Reference ID: 5960To apply for this fantastic job role, please call on 0121 638 0567 or send your CV to contact@jupiterrecruitment.co.uk ....Read more...

Operations Manager

Job title             Operations Manager Location             Waltham Abbey   Hours of work    Contracted 42.5 hours week – Monday to Friday   Salary                 Circa £50,000 to £55,000 depending on skills and experience   Our client are a proud independent bathroom manufacturer and distributor.  They have a heritage of innovation and a wealth of experience supplying the leading names in bathrooms for over 37 years. Main purpose of the role: To manage and oversee the customer service, warehouse and logistic functions at our clients Waltham Abbey site to achieve the safe, efficient, timely and profitable delivery of orders to customers. To maintain and develop the business structures with profitable implementation of the Company’s Objectives in relation to internal logistics and operational standards. Knowledge, Skills & Experience RequiredProven experience of warehousing, logistics and distribution managementExperience within a similar industry is highly desirable but not essentialFinancial and Commercial awarenessSound knowledge of Health & Safety legislation and practiceBasic working knowledge of environmental legislationKnowledge and experience of work processesGood interpersonal and people management skillsGood motivator and people developerHighly organised; must be able to prioritise to manage workloadsA thorough knowledge of the Supply Chain is required, with particular emphasis on experience of: Warehousing, Transport, Health and Safety and Logistics ITCommunication and negotiation skills are essentialProficient in providing business solutions and communicating these for executionUnderstanding of operational issues related to business performance and productivityProven ability to follow company policy and procedures for all operational matters (i.e. Health and Safety, Business Controls, Human Resources etc)Control HS&E trainingOversee or perform investigations as required for accidents/incidents.Report recommending approach to prevent any recurrence.Key Result AreasTo deliver targeted improvements to group internal logisticsWork closely with Warehouse Managers to ensure efficient logistics operationsContinual analysis and review of the operational processes across the site to establish their effectivenessActively seek cost-effective solutions to improve the strategic and tactical running of the businessTo meet business objectives of responsiveness and agility to maximise customer satisfaction by developing best practice operational cost-efficient processesTo develop and maintain best operating practice for the business, where appropriate ensuring the consistency of working methods and procedures across all sites, including stock management processesTo maximise efficiency and productivity through the effective deployment of resources and staff; recommend appropriate investment in plant and machineryTo monitor achievement of service levels, operating efficiencies, stock management, and supporting administration. To take remedial action where required in consultation with the Managing DirectorSupport the implementation of Stock Management methods and procedures to increase stock availability at site while reducing overall stock holdingsTo establish and maintain strong, productive working relationships with the sales and Customer Service team to achieve a realistic standard of service which both meets and exceeds customer expectationTo take responsibility for recruiting, appraising, training and developing supervisors and staffTo manage the cost budgets in areas of responsibilityTo ensure the security, repair and maintenance of the sites, including offices, land, plant and machineryTo maintain a high profile for Health and Safety and to ensure the enforcement of safe working practices at all times; to ensure the adherence of supervisors and staff to the statutory and Company requirements in respect of all H&S issuesTo liaise with external transport hauliers to ensure the most effective costs and efficienciesUndertake quarterly review meetings with transport suppliers to ensure cost effectiveness and optimum service levelsQualificationA proven history of success in operations managementProfessional qualification - Six Sigma, CPC or related subjects desirable but not essentialBenefits:Holidays – 23 days rising to 25 after 5 complete years’ service.Employer Pension scheme – 3% contributionIf you feel you have the relevant experience then we’d love to hear from you, apply today! ....Read more...

Production Planner

Job Title: Production Planner Location: Kings Langley, Hertfordshire Salary: £33,000 - £40,000 per annum (Negotiable, dependent on experience) Benefits:State-of-the-art machine shop equipped with brand new CNC machine tools and the latest equipment/software.?Transparent and inclusive management and working environment.?25 days holiday, plus Bank Holidays.?Company pension scheme.Personal Protective Equipment (PPE) supplied.? Company Profile A precision CNC manufacturing company based in Hertfordshire, operating a high-performance engineering facility that serves a wide range of industries including aerospace, defence, motorsport, and robotics. The company is committed to quality and precision, utilising advanced machine tools in a modern, clean working environment.? Job Profile An opportunity has arisen for a Production Planner to join the production team within a high-specification CNC machining environment. This role is responsible for coordinating and scheduling production activities to ensure the timely delivery of components to customers. The focus is on structured planning using standard operating procedures and interdepartmental inputs—no deep technical expertise is required, but a strong grasp of scheduling and communication is key.? Key Responsibilities: 1. Contract Review & Delivery CommitmentCollate inputs from Engineering, Quality, and Commercial teams.?Assess customer requirements and internal capacity using process flowcharts.?Propose realistic delivery dates based on structured planning methodologies.?Maintain a documented audit trail of all contract reviews and planning decisions.? 2. Production Schedule Creation & MaintenanceGenerate detailed production schedules, breaking down jobs into operations with clear priorities and deadlines.?Adjust schedules based on real-time changes or disruptions in workflow.? 3. Capacity & Resource PlanningMonitor machine and labour availability, balancing workloads effectively.?Identify potential bottlenecks early and escalate where necessary.?Prioritise production according to delivery commitments and operational constraints.? 4. Cross-Functional CommunicationCollaborate daily with Team Leaders, Workshop Supervisors, Engineering, and Purchasing departments.?Communicate changes to delivery or production schedules clearly and promptly.?Report any delays in material or tooling availability to relevant stakeholders.? 5. System & Data ManagementEnsure accuracy and integrity of job data within the MRP system.?Routinely review and revise the schedule to reflect the latest operational conditions.?Log all changes to production plans, including rationale.? 6. Process AdherenceFollow structured procedures and planning flowcharts to guide decision-making.?Apply logical reasoning to overcome scheduling challenges without technical intervention.?Escalate any non-standard or technical issues to relevant departments.? Ideal Candidate:Strong organisational, planning, and communication skills.?Logical thinker with excellent time management.?Proficient in MRP systems and Microsoft Excel.?Experience working in a manufacturing, logistics, or production planning environment.?Familiarity with machining processes (advantageous but not essential).?Comfortable working within a structured, process-driven environment.? Hours of Work:Full-time (Monday to Friday)?40hrs per week.8am to 4pm, Monday to Friday.Office-based role with regular interaction across departments?. This is a great opportunity for a methodical and detail-oriented planner to join a leading CNC manufacturing business and play a key role in ensuring smooth and timely production operations.Bolt-On Personnel and our clients are equal opportunity employers who seek to recruit and appoint the best available person for a job regardless of marital/civil partnership status, sex, age, religion, belief, race, nationality and ethnic or national origin, colour, sexual orientation or disability.  Bolt-On Personnel and our clients apply all relevant Data Protection laws when processing your Personal Data.  If you choose to apply to this opportunity and share your CV or other personal information with Bolt-On Personnel, these details will be held by us in accordance with our privacy policy used by our recruitment team to contact you regarding this or other relevant opportunities at Bolt-On Personnel. ....Read more...

Foreman - Façade

JOB DESCRIPTION GENERAL PURPOSE OF THE JOB: WTI Commercial Façade Foreman is responsible for the oversite and performance of safety, efficiency, and quality of the WTI Commercial Building Envelope business. Safety is our number one priority and will be embedded into every discussion, meeting, and project. As the clear and established leader of the WTI crew, the WTI Foreman is focused on safety, crew management, and efficient execution of all WTI Projects assigned to them. Travel will be required. It is the responsibility of the WTI Commercial Foreman to deliver timely and the highest quality service to all our WTI customers. ESSENTIAL DUTIES AND RESPONSIBILITIES: Actively administers and enforces Company safety policy and program to minimize accidents affecting employees, the public, and property. This includes responsibility for conducting safety meetings, complying with governmental regulations, reporting and investigating accidents, and planning site-specific job safety procedures, including: Conduct the daily on-site safety brief with all on-site project personnel (Sales Rep, Customer, WTI Supt & Crew, etc.) prior to the start of the WTI project. Inspect and ensure the safety of surroundings, equipment, and tools and identify and discuss any safety concerns. Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable. Ensure all project communication is completed prior to the start of any WTI project. This includes but is not limited to communication with: Sales Rep on weekly/daily schedule WTI crew members to discuss the scope of work and daily tasks The customer prior to arrival, upon arrival, and upon completion of daily work WTI Supervisor on safety, schedule changes, project and crew updates, etc. Efficient project management includes managing crew start and end times and production rates and ensuring tools and materials are available to safely and efficiently complete the assigned project. Complete the project per the scope of work, design, and specification of contract & engineering documents. Complete an end-of-day and/or end-of-project walk-through to ensure quality repairs and address any items prior to leaving the job site. Before-and-after pictures will be sent to the Sales Rep, and information will be included in daily project status reports. These items will include detailed work performed updates, materials consumed, and supplies purchases, which are all recorded daily. Supervises, directs, and coordinates the scheduling and execution of projects in assigned areas. This responsibility includes job start-up, job execution in accordance with contract specifications, job shut-down, and manpower scheduling, all consistent with the planned costs of the job. Manages field personnel, including, but not limited to, recruiting, hiring, training, motivating, and retaining the quality and number of production personnel needed to meet operating demands. This responsibility also includes laying off personnel, disciplinary action, employee assistance, and handling union matters relative to employees. Ensure that all WTI Field Labor will have a professional appearance and customer interaction while completing services for a customer. Responsible for the tracking and monitoring project inventory. Maintains the highest quality on-site customer relations in projecting a positive image. Has knowledge/understanding and assures assigned projects comply with all governmental rules and regulations affecting work sites and employees, i.e. OSHA, DOT, EEO/Affirmative Action, EPA, Wage and Hour, etc. Manage, monitor, and document the performance of WTI Commercial Field Labor and take appropriate steps or corrective measures to resolve employee and work-related issues. Consult with the WTI Commercial Supervisor and Human Resources as needed. Contributes to operations by supplying accurate and timely job information, including daily job logs, job file documentation, and compiling information for billing the customer. Provide management with the earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and purchasing of company equipment, materials, tools, and other assets as assigned by the WTI Commercial Supervisor. Trains employees in proper material and equipment usage, maintenance, and storage. Coordinates and monitors the performance of on-site subcontractors, where appropriate. Perform any other duty and/or project as required or assigned by the WTI Supervisor and/or Commercial Business Manager. OTHER SKILLS AND ABILITIES: 5+ years of progressive experience in a similar role, including leading teams and technical solutions, training, troubleshooting, etc. Must be thoroughly familiar with standard façade construction, including masonry, EIFS, Stucco, Curtainwall, metal panels, concrete, plaster, and other forms of facade systems and how to properly repair them using Tremco CPG Materials. Must be able to travel. This is a 100% travel position. OSHA 10 certification Apply for this ad Online! ....Read more...

Business Administrator Apprenticeship at Millbrook Surgery, Castle Cary

We are looking for a highly motivated and enthusiastic Apprentice Personal Assistant (PA) to join our management team at Millbrook Surgery. This is an excellent opportunity for an individual looking to start their career in administration and healthcare, offering on-the-job training and the chance to gain hands-on experience in a GP practice environment. You will support the management team with various administrative tasks and help ensure the smooth operation of the practice. There will also be the expectation to attend our practice in Glastonbury (Glastonbury Health Centre) to support management where required. Key Responsibilities: Administrative Support: Assist the Practice Manager and senior management team with administrative tasks such as scheduling meetings, managing calendars, and preparing basic reports and documents. Handle incoming calls and enquiries on behalf of the management team, providing friendly and professional customer service. Help organise and coordinate meetings, including preparing agendas, taking minutes, and following up on action items. Maintain organised and efficient filing systems (both physical and digital) to ensure all documents are easily accessible. Diary and Schedule Management: Support the management team by scheduling appointments and managing their diaries effectively. Ensure the management team is prepared for meetings by organising relevant documents and materials. Assist in scheduling the clinical and administrative staff. Communication and Liaison: Act as the first point of contact for internal and external communications, including liaising with patients, clinical staff, and external stakeholders. Help with the distribution of internal communications, such as memos and announcements. Project Support: Assist with various projects within the practice, providing administrative support and helping to track progress. Support the preparation of presentations and reports as needed. Office Management: Assist with ordering office supplies and managing inventory. Help with maintaining the general cleanliness and organisation of the office environment. Assist with organising the building maintenance. Confidentiality and Compliance: Handle patient and practice information in a confidential manner, ensuring compliance with data protection and confidentiality standards. Follow practice policies and procedures to ensure smooth operations and patient safety. Learning and Development: Participate in relevant training and development opportunities as part of your apprenticeship to enhance your administrative and healthcare knowledge. Support and learn from the management team, gaining insights into the day-to-day operations of a GP practice. Key Skills & Qualifications: No prior experience is required, but a keen interest in administration and healthcare is essential. Strong organisational skills and the ability to manage multiple tasks. Excellent communication skills, both verbal and written. Basic IT skills, including proficiency in Microsoft Office (Word, Excel, Outlook). Ability to maintain confidentiality and handle sensitive information. A willingness to learn, work hard, and be proactive. Good attention to detail and the ability to follow instructions. Desirable Attributes: A positive, can-do attitude and eagerness to assist the management team. Ability to work well both independently and as part of a team. Good time management skills, with the ability to prioritise tasks. Benefits: On-the-job training and development opportunities. Support in gaining a recognised qualification. Pension scheme. Training Outcome:Possibility of a permanent position on completion of the apprenticeship.Employer Description:We are an innovative practice providing team-based patient care to a rural community based around the beautiful Somerset town of Castle Cary. Despite the pressures on General Practice, we have been able to stay ahead of the curve by continuously improving our services and looking at new ways to work smarter. This has seen us make some bold changes to stay ahead. With such a positive team, embracing innovation and evolving new projects to fit the need of our local community, our patients are able to enjoy a personal, friendly service with easy access to the whole team.Working Hours :This is a full-time apprenticeship position, with standard working hours of 09:00 – 17:00 (30 mins unpaid break) Monday to Friday. Some flexibility may be required to accommodate specific tasks and training sessions.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Team working,Initiative,Non judgemental,Maintains confidentiality,A willingness to learn,Hard working,Proactive ....Read more...

Apprentice Teaching Assistant at Hamstead Primary School

As a member of the school's learning support team, your main jobs and duties will consist of: Support to pupils: 1:1 support to pupils with complex and profound multiple learning difficulties To facilitate the pupil’s development and skills in the use of resources including IT To maintain pupils’ interests and motivation Assisting pupils with dress/changing for activities/ personal hygiene To support individual/group work across the curriculum to raise levels of achievement Care and welfare of pupils to include toileting and feeding as required Escorting pupils around school premises Support to School: Contact and links with those with parental responsibility during the working day, as part of the normal consultative and educational process To maintain school policies and procedures Preparation of rooms, equipment and displays Maintain school routine To promote high standards of behaviour throughout school in accordance with the Behaviour Policy Support the ethos of school Maintenance of safe environment Support to Teachers: Contact with parents as part of normal consultative and educational process, e.g. parent’s evenings To deliver pre-planned programmes of work Planning and organisation of activities for children and support to teachers in the completion of assessment and other pupil records Undertaking duties on a rota basis during mid-morning breaks To assist the teacher with supervision of pupils on school trips/visits Keeping materials and equipment in tidy/safe manner Liaison with teachers and other staff to obtain, exchange and record information on pupils in accordance with school policy Support the supervision of individuals/groups of pupils  Support with Curriculum: To assist in the teaching of the curriculum Support to teachers in the assessment and monitoring of pupils, in accordance with school policy To support individual/ group work across the curriculum to raise levels of achievement and to respond appropriately to pupils Participation in working groups on curriculum matters Involvement in informal planning meetings Attendance at staff meetings and appropriate training sessions as required Development and preparation of curriculum materials It is your responsibility to carry out your duties in line with the School's policy on equality and be sensitive and caring to the needs of the disadvantaged, promoting a positive approach to a harmonious working environment. You should act as an exemplar on these issues and should identify and monitor training for yourself and any employees for whom you are responsible, in line with this policy, the Equality Standard and obligations under the Race Relations (Amendment) Act 2000. The post holder must always carry out his/her responsibilities with due regard to the school's policy, organisation and arrangements for Health and Safety at Work.Training: As well as working towards a Level 3 Teaching Assistant Apprenticeship Standard, you will learn job-specific skills from experienced colleagues Sandwell apprentices also participate in our bespoke 'Skills Academy' for apprentices. In addition to a workplace mentor you will receive support throughout your apprenticeship by a dedicated mentor from the Council's Apprenticeships team Training Outcome: The post is offered on a fixed-term contract to cover the duration of the apprenticeship training. You will receive support and guidance to identify and apply for any further apprenticeships or internal jobs that you are suitably experienced and qualified for Our 'Next Steps' workshop will help you to identify the skills that you have gained throughout your apprenticeship in order to update your CV and apply for any opportunities Employer Description:Sandwell is a large, multicultural metropolitan borough situated in the heart of the Black Country, to the west of Birmingham, within the West Midlands conurbation and with a population of over 280,000. The Council is one of the largest employers in the Borough with employees in a variety of occupations, providing a comprehensive range of services. For more information about Sandwell Council’s apprenticeship programme and our recruitment process please visit our YouTube channel. Find out more information on Sandwell’s Values and Behaviours on the council’s webpage. For more information on careers in local government you can view a copy of the Local Government Career Guide.Working Hours :Monday - Friday. Exact times to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Number skills,Team working,Creative,Non judgemental,Patience,Motivational,Professional,Mature,Flexible,Willing to learn,Outgoing ....Read more...

Level 4 School Sports Coach Apprentice

School Sport Coaches design and deliver coaching programmes that focus on the acceleration of sustainable mastery of children’s psychomotor skills and wider physical education standards. They profile children’s cognitive, social, emotional and physical development needs. They measure psychomotor, technical and tactical skills in a range of physical activity contexts drawn from the Department for Education’s National Curriculum to enable physical education targets to be agreed. These results are used to create a high-level curriculum plan that considers school term schedules and a ‘whole child’ development approach. Duties will include: Supporting the delivery of high quality and inclusive PE lessons to pupils in school in line with the requirements of the national curriculum for PE Support/lead extra-curricular activities and clubs Assist with school games competitions & events Run/organise and support physical activity and engagement at break and lunch times To support pupils in accessing other learning activities as directed by the teacher To provide cover for PE / Sports staff when absent To ensure the maintenance of PE equipment, checking for quality and safety, undertaking repairs / modifications within your own capabilities and reporting other damages as appropriate. To monitor stock and supplies, cataloguing as required To prepare PE equipment / resources / materials as required by staff within strict time scales To implement structured learning activities / teaching programmes in line with the National Curriculum, under the direction of the teacher To demonstrate, and assist others in the safe and effective use of PE equipment / materials To provide feedback to pupils in relation to progress and achievement To maintain records as requested To provide clerical and administration support to the teacher, such as typing, printing, photocopying and display work. To participate in meetings as required. Administration tasks related to planning and evaluating coaching activities/projects Safeguard children at all times Supervise and support pupils ensuring their safety, by complying with good H&S practice Contribute to raising standards by ensuring high expectations are shared with children Supervise and support pupils ensuring their safety, by complying with good H&S practice Support the teachers and other staff in managing pupil behaviour, reporting difficulties as appropriate Training:The blended learning delivery design encompasses a range of methods to engage apprentices and offers a rich and exciting programme. Your training programme will involve: Level 4 School Sports Coach Apprenticeship Standard & qualification Sector specific CPD, such as: Multi-skills Coaching qualification Supporting the PE curriculum Behaviour Management Practical PE Curriculum Outdoor adventurous activities Gymnastics Dance Safeguarding / Prevent Mental Health and Wellbeing Functional Skills in maths and English (where required) Training Outcome:We will support you in your personal development by providing you with the underpinning knowledge, skills and experience for the following: Careers within the Sport Coaching industry Careers within the Education sector including Behaviour & Learning Mentors, Teaching Assistants and Primary Teaching Potential further employment with the employer Opportunity for further education Candidates successfully achieving this apprenticeship will be eligible to apply for membership with the Chartered Institute for the Management of Sport and Physical Activity (CIMSPA) as a Practitioner Employer Description:Westcroft is an all through school for pupils with Special Educational Needs. We have 210 pupils on roll aged from 5 to 19 years. The school provides comprehensive training throughout the school year to develop understanding of their needs and how best to engage and motivate the pupils. All pupils enjoy use of our excellent facilities (both indoor and outdoor) to promote a physically active curriculum. Pupils are grouped into classes of between 10 and 12 per class and have swimming and PE each week as well as Outdoor Education and Active learning sessions. Our older pupils use local facilities to promote their independence as they grow towards adulthood which helps them to understand and use Leisure Centres and parks safely and enjoyably.Working Hours :Term time 39 weeks per year plus 2 weeks in the school holiday. 8.30am to 4.30pm Monday to Thursday & 8.30am to 4.00pm Friday, with a 30 minute unpaid break each day, unless otherwise agreed in line with timetable requirements.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness ....Read more...

Finance Business Partner

Purpose of the role To be responsible for implementing the business partnering function for the specified service area. The role is pivotal in providing strategic support in all aspects of financial advice for the service. They will act as a partner with the service leadership teams to develop, constructively challenge and support service plans and project delivery and take responsibility for managing and reporting on operational performance for the business partnering team. Assess situations from a commercial, business or finance perspective; provide appropriate financial advice to support complex business decisions. Business Partners will work closely with all stakeholders to ensure best use of limited financial resources, providing the strategic financial insight, intelligence and support needed. Respond to government and professional consultations, implementation of best practice models and any other such requirements. Provide an effective Business Partnering function and to contribute to the development of the policies, activities and service improvements required to deliver the function. The post holder will have a body of theoretical and practical knowledge. Provide advice and support which demonstrates depth of knowledge, expertise and customer focus and be responsible for the provision of revenue monitoring, capital monitoring, budget setting (revenue and capital), MTFS setting, closure of accounts. Responsibilities To proactively lead the financial advice and support to the defined service area particularly with reference to revenue and capital monitoring including delivering savings, and the budget setting and closure of accounts processes. To ensure that financial information is relevant and balanced and is received by decision-takers at the appropriate level. To ensure that financial data analytics are used where appropriate to better inform budget monitoring and longer term financial planning. To work with services to ensure the accuracy of information input to systems and proper responses to system outputs. To regularly spend time in the designated service to become an integral part of the management team within the service area and to develop and maintain a detailed understanding of the service area being supported. Ensure managers within the service areas supported receive the financial management training required to be effective in their roles and are aware of Financial Regulations (in particular the responsibilities of the Director and budget holders/managers) and requirements for obtaining the necessary approval prior to taking decisions. Continually review, update and report on quantified financial risks and opportunities in the delivery unit or commissioning area supported, advising how the risks can be mitigated and the opportunities exploited. To advise the Heads of Finance Business Partnering of any matters that should be referred to the Chief Financial Officer in their S151 role on funding, financial management and accounting requirements in respect of the portfolio of services which the postholder has responsibility for. Working closely with the Heads of Finance Business Partnering to contribute towards the development of the Integra Financial Management System working with the designated service areas and the team responsible for the maintenance and development of Integra to drive improvements forward. To lead, manage and motivate staff through excellent communication, professional guidance, support and development in accordance with the policies and procedures. To be customer-focused and to develop self-service underpinned by reducing finance support. To provide advice and support to Members, management board, directors and deputy directors on the full range of issues within the scope of the job. To ensure effective financial support to programmes and projects. To undertake any other tasks, duties and responsibilities as directed and appropriate to the grade and role of the post. Deputise for the Head of Finance Business Partnering as required. Essential Qualified CCAB Accountant or Equivalent Relevant Finance Qualification. Participation in Continuing Professional Development. Accounting and budgetary experience, sound knowledge of local government finance framework, accounting principles and standards, statutory requirements and relevant codes of practice. Knowledge of the major issues facing local government, understanding of the national policy context, requirements and future direction for local authorities. Good interpersonal and communication and presentation skills, with proven ability to communicate effectively to a wide range of audiences both horizontally and vertically, financial and non-financial, throughout the organization. Sound knowledge of accounting principles and standards Experience of attending Member Committees and/or other corporate/board meetings. Staff management experience with the ability to lead and develop a team. Relevant service accounting experience. Experience of delivery of change programmes. Ability to work and deliver on projects in a pressurised environment as well as the flexibility to adapt to changing circumstances. Ability to work effectively in a political environment and establish positive relationships with senior managers, staff, external partners and interest groups in a way that establishes confidence, credibility and trust. Ability to fully utilise standard Microsoft Office products. Desirable Experience of financial appraisals, modelling techniques, development of business cases. Location: Bexleyheath Hours per week: 36 hours per week ....Read more...

Continuous Improvement Engineer

JOB DESCRIPTION Title: Continuous Improvement Engineer Who We Are: Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you. Position Summary: The Continuous Improvement Engineer will be a part of Carboline Global Continuous Improvement Team supporting the development and execution of continuous improvement projects at the Lake Charles, LA manufacturing facility. The person in this role will serve as a key resource to support plant optimization efforts regarding capacity, cost, safety, quality, and environmental improvements. Essential Functions: Understanding of Lean Manufacturing/Continuous Improvement methodologies and ability to teach and model them. Investigating shortfalls, issues, and complaints in current business processes. Ability to influence, mentor, and coach to get results through others. Collaborates with operations manager and/or plant engineering on modification of equipment and processes to reduce cost and improve efficiency and quality. Works together with R&D, engineering, and plant resources to develop and implement continuous improvement projects. Collaborates with R&D on process development - Including reviewing and approving proposed manufacturing procedures for new products. Provides technical support and consultation to the Quality Control department. Specifically, regarding recovery plans for off-specification, obsolete, and problem finished goods. Monitors the consistency of production using SQC, SPC, or other appropriate techniques. Strong communicator with top-notch presentation skills who can develop and provide training to production personnel on matters concerning formulation, materials handling, processing, and quality procedures. Follow all environmental rules and regulations to ensure hazardous materials and waste are managed in an environmentally responsible manner. Leadership role in effort to recertify and reclaim Non-Conforming material. Works in coordination with QC and R&D to isolate, test and recertify Non-Conforming material that can be repackaged and sold. Observing production processes, conducting research, and finding ways to increase efficiency and quality. Continuously challenging the status quo understood as a day-to-day activity in our operating areas. Proactive problem solving based on statistical analysis of corrective actions / assigned by Engineering Director, Plant Manufacturing Manager, QA, EHS projects. Selection and development of tools and fixtures for improvements. Perform additional duties as assigned. Commitment to the Company's Safety and Quality programs. Take an active role in hazard recognition and injury prevention by following all safety rules & regulations. Requirements: 4 years Chemistry, Engineering degree or equivalent experience, minimum 3 years' experience in a CI role. Formal training in Lean and/or Six Sigma methodologies preferred Green Belt. Ability to read and interpret documents such as procedure manuals, operating and maintenance manuals and safety rules. Ability to use a computer for all company required processes, procedures, and trainings. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee must have the ability to stand for up to four hours regularly, required to use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee frequently is required to stand, walk, stoop, kneel, crouch or crawl. The employee is occasionally required to sit and climb or balance. Any function may be performed for up to four hours with no breaks. What We Offer: We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. This position will also have the option to work from home 1 day per week after 6 months. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply. "In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...

Box Office Supervisor

Full-Time; PermanentWage & Paygrade: $24.45 (PG 3) plus benefits enrollment.Date Posted: January 24, 2025Who we are…The Pacific National Exhibition is an iconic institution in BC, famous for bringing generations of people together to celebrate and build memories. This 115-year-old, non-profit organization has an annual operating budget of over $70 million dollars and generates revenue through four activity streams:  the 15-day annual summer Fair which averages more than 700,000 people annually, Playland amusement park which welcomes 400,000 guests annually including Fright Nights, and a busy year-round portfolio of events including concerts, trade shows and film, cultural and community events.  In total we bring over 2 million people through the site each year. The fourth activity stream is park care and facility maintenance. The PNE is proud of the work it does at Hastings Park and has a vibrant team that is passionate about events, guest experience and delivering memorable experiences.At the PNE, we strive to create an environment that reflects our organization’s core values: Enthusiasm, Excellence and Evolution. With a focus on these core values, we are committed to achieving our mission which is to “Deliver Memorable Experiences” for all who interact with the PNE whether it is our guests, our employees, or the community.We are looking for a hard-working and motivated individual to join our the PNE TicketLeader team under the direction of the Manager, Call Centre. Ticket Leader Box Office offers premier ticketing services for concert promoters, bands, professional sports teams, arenas and other venues. The Box Office Supervisor will help oversee the operations of the Box Office, the Call Centre, as well as its respective agents. If you have a passion for the events industry and enjoy providing excellent guest experiences, then this is a perfect opportunity for you!Why join our Team? Exhilarating and fun-loving cultureFlexible work environmentOpportunity for free or discounted tickets to shows, events, sports games, and much moreStaff discounts for Playland, The Fair, and Fright Nights, as well as all PNE Food StandsCompetitive compensation packageOpportunity to create lasting memories and friendships! What will you do this year?In your role as a Box Office Supervisor your primary accountabilities will be to: Supervisor on duty for various events located at the PNE and the Greater Vancouver Area, ensuring that all Box Office operations run smoothly and according to standard.Responsible for supervising and supporting an average of 2-3 call center agents daily and at events, troubleshooting any ticketing issues that arise.Resolve any patron issues that escalate in a professional and polite manner.Ensuring secure cash deposits at end of shift.Monitor ticket booth crowds and take appropriate action as required.Responsible for allocation of floats, skims, and ticket stock during events.Ensure that all Ticket Office staff are working in a clean and safe environment.Perform other related duties as assigned. What else? Must have successful completion of Grade 12.Must have 1-2 years previous supervisory experience.Previous experience handling cash, credit & debit cards, balancing documents, and performing various accounting duties.Previous experience working with event ticketing software is considered an asset.Background with guest service/ customer relations is required.Box Office experience is considered a definite asset.Must be proficient with utilizing MS Word, Excel, and Outlook.Must be capable of reading, writing and speaking English for the purposes of written or oral instructions, timesheets and documentation of work.Must be physically capable of walking and standing for extended periods of time.Ability to work under pressure in a fast-paced environment while maintaining a friendly attitude.Must be available to work varying shifts, evening and weekends required.Successful candidates must undergo a Criminal Record Check. Who are you? OrganizedMethodicalProactiveSkillful communicatorCritical thinkerCommitted to striving for excellence Where and when to APPLY?Applications can be submitted via the PNE website at www.pne.ca/jobs and will be accepted until the role is filled.The PNE is proud to be an equal opportunity employer, committed to creating an inclusive workforce that reflects the diverse community we proudly serve. All applicants will receive consideration for employment without regard to race, colour, national or ethnic origin, religion, sex, sexual orientation, gender identity or expression, disability, or age. If you require any support or accommodations throughout any stage of the recruitment process, please contact the People & Culture Department at hr@pne.ca. ....Read more...

Design Engineer

Our client is a leading engineering business that has been established for over half a century providing mechanical handling solutions to many industries across the globe.They are looking to strengthen their projects & design team by recruiting an additional project engineer / design engineer to their successful team.If you have previous design and or project experience within materials handling equipment and are looking to join a highly stable company who can offer a competitive salary then apply now for immediate consideration.Purpose of Job: Responsible for the engineering and technical disciplines needed to complete a project.Project Engineer / Design Engineer - Core Skillset• System layout experience• SolidWorks + AutoCAD (GA, Design & Detailing)• Experience with special purpose machinery, ideally conveyors• Sheet metal, structural and fabrication design• Solid knowledge of material flow• Project Management• Managing costs, BOMs• ERP/ MRP systems• Prior experience with recycling equipment ideal but not essentialDesign Activities• To produce general arrangement drawings in 3D and/or 2D for the Projects and Sales departments. This involves the full engineering integration of the company’s inhouse products (conveyors, structures and ancillary equipment) with that of specialist third party manufacturers to create a tailored plant layout within the space available without compromising material flow.• To work with the Sales team or the Projects team to optimise a layout until it reaches the point of Design Freeze at which the customer signs off the GA to allow full project launch.• To ensure design quality, cost, time and standardisation are appropriately considered throughout the design and delivery process• To use SolidWorks and AutoCAD as the main design platforms for the above.Project Engineer / Design Engineer - Project Execution• Be hands-on, pro-active and own the engineering development of a project from initial concept through design, release, manufacturing, testing and commissioning.• To model and detail detailed in-house products through to full release to the shopfloor producing detailed manufacturing drawings from 3D models (SolidWorks). This will involve using the Company’s standards library and customising if necessary.• To create and release BOM’s (Bill of Materials) within the company MRP system.• To produce and maintain technical documents for the Engineering and Sales departments, operating manuals, H&S, maintenance etc.• To define product technical specifications, both internal design standards and legislative/mandated industry standards.• To attend site to take or check measurements• To produce technical specifications for in-house products or those we purchase.• To challenge existing designs and manufacturing methods for the benefit of the Company and the customer.• To work closely with the Manufacturing department, Project Engineers and Sales team to ensure designed products meet the overall requirements of the business• To provide full engineering support on the project including at site whenever needed and particularly over Installation, Commissioning and Testing.• To give full support to the Project Manager over the course of the project and attend site as necessary to ensure the plant/machine is successfully commissioned and customer is delighted.Assessment and Improvement Duties• Assess which sales and/or project layouts worked well, and which did not in order to improve the design process for next time.• Work on the continuous improvement of existing products and processes. • Make any necessary adjustments to designs to reduce costs wherever possible.• To analyse the costings of our proposals and projects in comparison to our competitors’ Proposals to unlock the differences between what is being offered in order help the Company’s Sales department become more effective with its own proposals.• To remove cost from our proposals by working continuously toward smarter solutions, tighter designs, alternative third-party suppliers and new processing concepts. To add as much functionality to every design, even if the extra functionality is included as priced extras. Our aim is for the most efficient designs with best functionality at the most cost-effective prices.• To appraise the Sales proposals to ensure the quality of our designs, offers and our approach is always at the highest possible level, visually appealing as possible, clear as possible in its concept to ensure our customers will value it.Experience & Qualifications• Experience as a Project Engineer / Design Engineer• Experience in sheet metal and fabricated product design is essential• Experience in special purpose machinery design, desirable• Experience in recycling and associated material flow• Proficient use of SolidWorks 2022 & AutoCAD 2D• Basic knowledge of electrical engineering• Creative and innovative with a desire to improve continuously• Excellent problem-solving skills• Able to efficiently communicate both written and oral• Confident decision-making ability• HNC or equivalent within mechanical / manufacturing engineering subjectDesign Engineer previous suitable job titles: Project Design Engineer, Project Engineer, Draughtsperson, Draughtsman, Draughtswoman, Draughtsperson, Design Project Engineer, Detailer, Mechanical Design Engineer, CAD Draughtsperson, CAD Drafter, Project Manager, Mechanical Project Engineer, Design Technician, Mechanical Design TechnicianPlease apply ASAP ....Read more...

Training Coordinator

JOB DESCRIPTION Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. GENERAL PURPOSE OF THE JOB: Become a vital partner in supporting the successful delivery of Tremco CPG Inc.'s internal and external training programs. This role is essential for coordinating training initiatives that drive growth and development across the organization. We are seeking a team-oriented professional who is eager to learn, collaborate, and contribute in a dynamic setting under the guidance of the Director of Learning and other business leaders. ESSENTIAL DUTIES AND RESPONSIBILITIES: Manage and coordinate key North American training programs: Collect and organize training needs and requests. Follow up on training requests from customer partners and sales team representatives. Schedule programs and events while maintaining an up-to-date calendar. Book venues and arrange necessary equipment. Order catering to ensure a pleasant participant experience. Secure and schedule trainers for various programs. Prepare and distribute training materials, such as guides, feedback forms, and certificates of completion. Collect feedback from participants and stakeholders to identify areas for improvement. Share a detailed report with the Director of Learning. Monitor accounts receivable and expenses; ensure invoices are processed and paid on time. Troubleshoot issues as they arise, such as rescheduling sessions or making adjustments to participant schedules. Assist with on-the-day training coordination at Tremco University Rhode Island: Set up training venues, ensuring all equipment and materials are in place. Welcome participants, manage sign-ins, and provide any necessary instructions for the day. Act as the primary point of contact during events to quickly address and resolve any issues. Act as a liaison for communication and coordination among partners, vendors, and participants. Monitor and manage emails related to training activities sent to the shared email inbox (TremcoCPGLearning@tremcoinc.com). Utilize the eLearning platform to maintain accurate training records, including tracking attendance, completions, and issuing certificates. Ensure compliance with organizational policies by employees and vendors involved in the training process. Handle attendee payment processing and communicate outstanding balances to stakeholders. Organize and coordinate meetings and events related to training initiatives. Maintain the shared drive/site with up-to-date resources and schedules for training events. Assist in tracking, maintaining, and reporting on key performance indicators (KPIs) for training programs. Manage and monitor expenses related to training efforts. Support sales activities as time permits, examples include project activity tracking, reporting, Sales Force support, event coordination, special price requests, lead generation follow-up, and other support duties. EDUCATION REQUIREMENT: High school diploma required. Associate degree preferred. In lieu of degree, at least 4 years' experience in an administrative role (e.g., HR Assistant). EXPERIENCE REQUIREMENT: Requires at least 4 years' experience in an administrative function (e.g., HR Assistant or other relevant position). OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: Experience in project management. Excellent organizational and multi-tasking ability. Strong communication skills with great attention to detail. Knowledge of office procedures and billing. Ability to work well with other organizations and personnel with disparate backgrounds. Ability to work independently and with a team. Proficient computer skills including but not limited to Microsoft office suite, SAP, etc. Proven ability to work well and independently in a fast-paced, ever-changing environment with frequent interruptions. Ability to travel (under 10%) to assist with training events. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, talk, hear, taste, and lift up to 25 lbs. occasionally. BENEFITS AND COMPENSATION: The salary range for applicants in this position generally ranges between $58,523 and $60,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...